ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D Performance Characteristics Tangent of loss angle (tan δ) Within ±20% of the initial value KS series Snap-in Terminal Type, For Audio Equipment, Smaller-sized Smaller and high-tone quality than KG series TYPE- 1 grade. An effect to tone quallity improvement by replacement from a small standard product to use. Compliant to the RoHS directive (2011/65/EU). Specifications Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Stability at Low Temperature Shelf Life Marking Item – 40 to +85°C 25 to 100V 680 to 33000µF ± 20% at 120Hz, 20°C After 5 minutes' application of rated voltage, leakage current is not more than (µA), [C : Rated Capacitance(µF), V : Voltage ( V ) ] Printed with silver color letter on black sleeve. Measurement frequency : 120Hz The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C. After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Z – 25°C/Z+20°C Z – 40°C/Z+20°C Rated voltage(V) Impedance ratio ZT/Z20(MAX.) 25 to 100 4 12 Measurement frequency : 120Hz at 20°C Rated voltage(V) tan δ (MAX.) Endurance Dimension table in next page. Capacitance change Leakage current tan δ Less than or equal to the initial specified value 200% or less than the initial specified value 25 to 71 80 • 100 0.25 0.30 3 CV For capacitance of more than 22000µF, add 0.02 for every increase of 1000µF. KS Smaller TYPE -1 Drawing 10 ±0.1 2-2 φ ±0.1 (PC board hole dimensions) (Terminal dimensions) 6.3±1 3.5 1.5 0.8 +0.2 - 0.1 +0.2 -0.1 0.8 +0.2 - 0.1 10 Polarity bar L ±2 φ D +1MAX. 6.3±1 Pressure relief vent Sleeve (P.E.T.) Type numbering system (Example : 35 V 8200µF) L 1 S 2 K 3 1 4 V 5 8 6 2 7 2 8 M 9 E 10 S 11 A 12 Configuration Case dia.code Capacitance tolerance (±20%) Rated voltage (35V) Series name Type φD 20 25 Code Y 22 Z A 30 35 B C Rated capacitance (8200μF) KG
4
Embed
ALUMINUM ELECTROLYTIC CAPACITORS KS - · PDF filecode y 22 z a 30 35 b c rated capacitance (8200µf) kg. aluminum electrolytic capacitors cat.8100d ks ... aluminum electrolytic capacitors
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ALUMINUM ELECTROLYTIC CAPACITORS
CAT.8100D
Performance Characteristics
Tangent of loss angle (tan δ)
Within ±20% of the initial value
KS series
Snap-in Terminal Type, For Audio Equipment, Smaller-sized
Smaller and high-tone quality than KG series TYPE- 1 grade.An effect to tone quallity improvement by replacement from
a small standard product to use.Compliant to the RoHS directive (2011/65/EU).
Specifications
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Stability at Low Temperature
Shelf Life
Marking
Item
– 40 to +85°C
25 to 100V
680 to 33000µF
± 20% at 120Hz, 20°C
After 5 minutes' application of rated voltage, leakage current is not more than (µA), [C : Rated Capacitance(µF), V : Voltage ( V ) ]
Printed with silver color letter on black sleeve.
Measurement frequency : 120Hz
The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C.
After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Z – 25°C/Z+20°CZ – 40°C/Z+20°C
Rated voltage(V)
Impedance ratio ZT/Z20(MAX.)
25 to 100412
Measurement frequency : 120Hz at 20°C
Rated voltage(V)
tan δ (MAX.)
Endurance
Dimension table in next page.
Capacitance change
Leakage current
tan δLess than or equal to the initial specified value
200% or less than the initial specified value
25 to 71 80 • 1000.250.30
3 CV
3 CV
3 CV
For capacitance of more than 22000µF, add 0.02 for every increase of 1000µF.