Aluminium ASC Metals Page 04 Aluminium ASC Metals Lincoln Ltd. holds a wide range of aluminium in stock, including: Lightweight with high strength/weight ratio Corrosion resistant Electrically/thermally conductive Non-magnetic and non-combustible Non-toxic and impervious Aesthetically pleasing with a wide range of surface finishes Good for decorative, functional or structural purposes Very malleable and easily machined Recyclable Aluminium is available in a wide range of alloys to suit different applications • • • • • • • • • • Aluminium is: Sheet Stucco sheet Checkmate Plate Treadplate Tee section Round bar Angle Flat bar Square bar Double feather edge Channel Tube Box section Half round mouldings • • • • • • • • • • • • • • • Aluminium’s most common specifications are 1050A H14, 3103 H14, 5251 H22, 5083 “O”, 6063 T6 and 6082 T6. Other grades are available upon request. For information on any technical specifications, please enquire. We provide a guillotining service of sheet and plate up to 10mm thick and up to 4m long, a plate-sawing service of up to 102mm thick and up to 3m long, and a tube/bar cutting service up to 305mm diameter. We can design and produce special aluminium extrusions for your specific applications, and anodising, polishing and powder coating finishes can also be arranged. To protect sheet surfaces, we can cover them in standard 2thou or 4thou thick poly-coating. We stock a wide range of standard sizes - the following pages list the most commonly requested items. We can also offer many non-standard products on request.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Aluminium
ASC Metals Page 04 Aluminium
ASC Metals Lincoln Ltd. holds a wide range of aluminium in stock, including:
Lightweight with high strength/weight ratio
Corrosion resistant
Electrically/thermally conductive
Non-magnetic and non-combustible
Non-toxic and impervious
Aesthetically pleasing with a wide range of surface finishes
Good for decorative, functional or structural purposes
Very malleable and easily machined
Recyclable
Aluminium is available in a wide range of alloys to suit different applications
•
•
•
•
•
•
•
•
•
•
Aluminium is:
Sheet
Stucco sheet
Checkmate
Plate
Treadplate
Tee section
Round bar
Angle
Flat bar
Square bar
Double feather edge
Channel
Tube
Box section
Half round mouldings
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Aluminium’s most common specifications are 1050A H14, 3103 H14, 5251 H22, 5083 “O”, 6063 T6 and 6082 T6.Other grades are available upon request. For information on any technical specifications, please enquire.
We provide a guillotining service of sheet and plate up to 10mm thick and up to 4m long, a plate-sawing service of up to 102mm thick and up to 3m long, and a tube/bar cutting service up to 305mm diameter. We can design and produce special aluminium extrusions for your specific applications, and anodising, polishing and powder coating finishes can also be arranged. To protect sheet surfaces, we can cover them in standard 2thou or 4thou thick poly-coating.
We stock a wide range of standard sizes - the following pages list the most commonly requested items. We can also offer many non-standard products on request.
Stainless SteelASC Metals Lincoln Ltd. holds a wide range of stainless steel in stock, including:
Sheet
Durbar
Hexagon
Pipe
Flat bar
Round bar
Tube
Square bar
Angle
Box section
•
•
•
•
•
•
•
•
•
•
Stainless Steel’s most common specifications are 1.4305 (303), 1.4301 (304), 1.4401/1.4404 (316/316L), 1.4541 (321) and 1.4016 (430). Other grades are available upon request. For information on any technical specifications, please enquire.
We provide a guillotining service of sheet up to 6mm thick and up to 4m long, and a tube/bar cutting service up to 305mm diameter. To protect sheet surfaces, we can cover them in standard 2thou or 4thou thick poly-coating.
Stainless steels are iron alloys with a minimum of 10.5% chromium and other alloying elements - including nickel, molybdenum, titanium, copper, carbon or nitrogen - to enhance their structure and properties. There are several families of stainless steels - ferritic, martensitic, austenitic and duplex - which all have different properties to suit different applications.
Stainless steel isCorrosion resistant to different levels to suit a wide variety of applications
Strong
Aesthetically pleasing
Easy to manipulate and fabricate
Temperature resistant
Hygienic
Non-magnetic or magnetic
Recyclable
•
•
•
•
•
•
•
•
We stock a wide range of standard sizes - the following pages list the most commonly requested items. We can also offer many non-standard products on request.
ThicknessWeight kg/m2
2m x 1m2.5m x 1.25m
3m x 1.5m 4m x 2m
6mm 48 96 150 216
5mm 40 80 125 180
4mm 32 64 100 144
3mm 24 48 75 108 192
2.5mm 20 40 62.5 90
2mm 16 32 50 72 128
1.5mm 12 24 37.5 54
1.2mm 9.6 19.2 30 43.2
0.9mm 7.2 14.4 22.5
0.7mm 5.6 11.2 17.5
0.5mm 4 8 12.5
ASC Metals Page 16 Stainless Steel
Stainless SteelStainless sheet
Stainless durbar Size Weight kg/m2
3m x 1m x 3mm 25.49
3m x 1.25m x 4.5mm 38.7
3m x 1.25m x 6mm 49
Stainless Sheet - Additional Information
Grades available: 304 (1.4301), 316 (1.4401) and 430 (1.4016)
Finishes available: 2B, dull polished, bright annealed and bright polished
All with plastic coating on request
Shearing facilities up to 6mm thick and up to 4m in length
Decoiling also available on requestBright Polished
Circle
Bright Annealed
Dull Polished
2B
Weight per sheet
ASC Metals Page 17 Stainless Steel
Stainless SteelStainless steel hexagon
Size Weight kg/m
0.193” 0.167
5mm 0.17
6mm 0.237
0.248” 0.272
0.250” 0.285
0.312” 0.43
8mm 0.436
0.324” 0.462
0.375” 0.614
10mm 0.68
0.413” 0.721
11mm 0.82
0.437” 0.834
0.445” 0.875
12mm 0.979
0.500” 1.102
13mm 1.148
0.525” 1.207
14mm 1.33
0.562” 1.387
15mm 1.53
0.600” 1.584
0.625” 1.712
17mm 1.96
0.687” 2.073
0.710” 2.201
19mm 2.447
0.750” 2.47
20mm 2.72
0.812” 2.893
0.820” 2.95
22mm 3.29
Size Weight kg/m
0.875” 3.349
0.920” 3.701
0.937” 3.839
24mm 3.92
1.00” 4.375
1.01” 4.478
1.062” 4.941
27mm 4.98
1.100” 5.31
1.125” 5.551
30mm 6.12
1.200” 6.322
1.25” 6.846
32mm 6.963
1.300” 7.419
1.375” 8.284
1.390” 8.476
36mm 8.81
1.48” 9.61
1.500” 9.859
41mm 11.4
1.625” 11.57
42mm 11.995
1.670” 12.221
1.750” 13.24
46mm 14.4
1.860” 15.17
2.000” 17.533
50mm 17
2.050” 18.38
55mm 20.57
2.220” 22.1
ASC Metals Page 18 Stainless Steel
Stainless SteelStainless pipe
Size Schedule O/D Wall thickness Weight kg/m
1/8”NB SCH 10 10.29mm 1.24 0.2822
SCH 40 1.73 0.3708
SCH 80 2.41 0.4753
1/4” NB SCH 10 13.72mm 1.65 0.4983
SCH 40 2.24 0.7690
SCH 80 3.02 0.8106
3/8” NB SCH 10 17.15mm 1.65 0.64
SCH 40 2.31 0.8579
SCH 80 3.2 1.1164
1/2” NB SCH 5 21.34mm 1.65 0.812
SCH 10 2.11 1.014
SCH 40 2.77 1.285
SCH 80 3.73 1.641
SCH 160 4.75 1.977
3/4” NB SCH 5 26.67mm 1.65 1.035
SCH 10 2.11 1.014
SCH 40 2.87 1.713
SCH 80 3.91 2.231
SCH 160 5.54 2.943
XX HEAVY 7.82 3.697
1” NB SCH 5 33.40mm 1.65 1.291
SCH 10 2.77 2.1223
SCH 40 3.38 2.541
SCH 80 4.55 3.287
SCH 160 6.35 4.301
XX HEAVY 9.09 5.533
1.1/4” NB SCH 5 42.16mm 1.65 1.675
SCH 10 2.77 2.735
SCH 40 3.56 3.444
SCH 80 4.85 4.536
SCH 160 6.35 5.70
1.1/2” NB SCH 5 48.26mm 1.65 1.927
SCH 10 2.77 3.158
SCH 40 3.68 4.112
SCH 80 5.08 5.498
SCH 160 7.14 7.359
2” NB SCH 5 60.33mm 1.65 2.423
SCH 10 2.77 3.99
SCH 40 3.91 5.527
SCH 80 5.54 7.596
SCH 160 8.71 11.284
XX HEAVY 11.07 13.646
We can offer a full range of pipe fittings & flanges to suit sizes as listed.
We can offer a full range of pipe fittings & flanges to suit sizes as listed
ASC Metals Page 20 Stainless Steel
Stainless SteelStainless flat bar
Size Weight kg/m
12 x 3 0.285
15 x 3 0.355
20 x 3 0.474
25 x 3 0.593
30 x 3 0.712
40 x 3 0.948
50 x 3 1.19
60 x 3 1.42
65 x 3 1.58
75 x 3 1.79
100 x 3 2.38
12 x 5 0.474
15 x 5 0.593
20 x 5 0.785
25 x 5 0.981
30 x 5 1.12
40 x 5 1.58
50 x 5 1.97
60 x 5 2.38
65 x 5 2.55
75 x 5 2.94
100 x 5 3.96
12 x 6 0.569
15 x 6 0.704
20 x 6 0.942
25 x 6 1.18
30 x 6 1.42
40 x 6 1.89
45 x 6 2.13
50 x 6 2.36
60 x 6 2.85
65 x 6 3.1
75 x 6 3.55
80 x 6 3.77
100 x 6 4.71
125 x 6 5.89
150 x 6 7.07
200 x 6 9.42
20 x 8 1.27
25 x 8 1.58
30 x 8 1.89
40 x 8 2.53
50 x 8 3.14
60 x 8 3.77
Size Weight kg/m
65 x 8 4.13
75 x 8 4.74
80 x 8 5.02
100 x 8 6.28
150 x 8 9.42
20 x 10 1.58
25 x 10 1.97
30 x 10 2.38
40 x 10 3.14
45 x 10 3.55
50 x 10 3.93
60 x 10 4.72
65 x 10 5.13
75 x 10 5.93
100 x 10 7.85
150 x 10 11.78
200 x 10 15.7
20 x 12 1.89
25 x 12 2.38
30 x 12 2.85
40 x 12 3.79
50 x 12 4.71
65 x 12 6.16
75 x 12 7.12
80 x 12 7.6
100 x 12 9.48
125 x 12 14.13
25 x 15 2.96
30 x 15 3.55
40 x 15 4.74
50 x 15 5.93
65 x 15 7.7
75 x 15 8.89
100 x 15 11.9
25 x 20 3.96
40 x 20 6.32
50 x 20 7.9
65 x 20 10.3
75 x 20 11.9
100 x 20 15.8
40 x 25 7.9
50 x 25 9.9
75 x 25 14.8
100 x 25 19.7
ASC Metals Page 21 Stainless Steel
Stainless SteelStainless round bar
Size Weight
3mm 0.055
1/8” 0.062
4mm 0.099
3/16” 0.14
5mm 0.154
6mm 0.222
1/4” 0.248
7mm 0.302
5/16” 0.388
8mm 0.395
9mm 0.499
3/8” 0.559
10mm 0.617
7/16” 0.761
12mm 0.888
1/2” 0.994
13mm 1.04
14mm 1.21
9/16” 1.26
15mm 1.39
5/8” 1.55
16mm 1.58
17mm 1.78
18mm 2
3/4” 2.24
20mm 2.47
13/16” 2.63
22mm 2.98
7/8” 3.04
24mm 3.55
25mm 3.85
1” 3.98
27mm 4.5
1 1/8” 5.03
30mm 5.55
1 1/4” 6.21
32mm 6.31
Size Weight
1 3/8” 7.47
35mm 7.55
1 1/2” 8.94
40mm 9.86
1 5/8” 10.5
1 3/4” 12.18
45mm 12.48
1 7/8” 13.96
50mm 15.41
2” 15.9
2 1/8” 17.95
2 1/4” 20.13
60mm 22.2
2 3/8” 22.44
2 1/2” 24.85
2 5/8” 27.39
2 3/4” 30
3” 38
3 1/4” 44
3 1/2” 51
3 3/4” 58
4” 66
4 1/4” 71.8
4 1/2” 83
4 3/4” 93
5” 102
5 1/2” 120
6” 147
6 1/2” 172
7” 199
7 1/2” 223
8” 260
8 1/2” 293
9” 328
9 1/2” 358
10” 404
ASC Metals Page 22 Stainless Steel
Stainless SteelStainless tube
Size Weight kg/m
1/2” od x 16g/1.5mm 0.42
5/8” od x 18g 0.44
5/8” od x 16g/1.5mm 0.54
3/4” od x 18g 0.53
3/4” od x 16g/1.5mm 0.66
7/8” od x 18g 0.63
7/8” od x 16g/1.5mm 0.78
1” od x 18g 0.73
1” od x 16g/1.5mm 0.9
30mm od x 16g/1.5mm 1.02
30mm od x 2mm 1.4
1 1/4” od x 18g 0.92
1 1/4” od x 16g/1.5mm 1.13
1 1/2” od x 18g 1.11
1 1/2” od x 16g/1.5mm 1.38
1 1/2” od x 2mm 1.81
1 1/2” od x 3mm 2.64
2” od x 18g 1.49
2” od x 16g/1.5mm 1.85
2” od x 2mm 2.4
2” od x 3mm 7.43
3” od x 16g/1.5mm 2.81
4” od x 16g/1.5mm 3.76
Finishes available: bright polished, dull polished and descaled.
ASC Metals Page 23 Stainless Steel
Stainless SteelStainless square bar
Size Weight kg/m1/4” 0.333/8” 0.72
10mm 0.785
12mm 1.131/2” 1.3
15mm 1.775/8” 23/4” 2.9
20mm 3.147/8”
25mm 4.91
1” 5
30mm 7.06
1 1/4” 7.9
1 1/2” 11.3
40mm 12.6
1 3/4” 15.7
50mm 19.6
2” 20
2 1/2” 32
3” 46
Stainless box section
Size Weight kg/m
15 x 15 x 1.2 0.53
15 x 15 x 1.5 0.65
20 x 20 x 1.2 0.74
20 x 20 x 1.5 0.91
20 x 20 x 2 0.88
25 x 25 x 1.2 0.95
25 x 25 x 1.5 1.18
25 x 25 x 2 1.55
25 x 25 x 3 1.49
30 x 30 x 1.2 1.16
30 x 30 x 1.5 1.43
30 x 30 x 2 1.37
30 x 30 x 3 1.84
40 x 40 x 1.2 1.52
40 x 40 x 1.5 1.82
40 x 40 x 2 2.49
40 x 40 x 3 3.67
50 x 50 x 1.5 2.39
50 x 50 x 2 3.16
50 x 50 x 3 4.65
60 x 60 x 3 5.55
80 x 80 x 2 5.15
80 x 80 x 3 7.65
100 x 100 x 2 6.41
100 x 100 x 3 9.51
100 x 100 x 5 15.38
20 x 10 x 1.5 0.626
40 x 20 x 1.5 1.37
50 x 25 x 1.5 1.83
50 x 30 x 1.5 1.85
60 x 40 x 1.5 2.33
80 x 40 x 2 3.71
80 x 40 x 3 5.55
100 x 50 x 2 4.68
100 x 50 x 3 7.07
Stainless angle
Size Weight kg/m
20 x 20 x 3 0.88
25 x 25 x 3 1.12
25 x 25 x 5 1.78
25 x 25 x 6 2.09
30 x 30 x 3 1.35
30 x 30 x 5 2.17
30 x 30 x 6 2.53
40 x 40 x 3 1.83
40 x 40 x 5 2.96
40 x 40 x 6 3.49
50 x 50 x 3 2.36
50 x 50 x 5 3.79
50 x 50 x 6 4.46
60 x 60 x 6 5.4
65 x 65 x 6 5.95
75 x 75 x 6 6.89
75 x 75 x 10 11.5
80 x 80 x 6 7.37
80 x 80 x 10 11.8
100 x 100 x 6 9.3
100 x 100 x 10 15
ASC Metals Page 24 Copper
CopperASC Metals Lincoln Ltd. holds a range of copper in stock, including:
Sheet
Round bar
Flat bar
Square bar
•
•
•
•
We provide a guillotining service for sheet and a bar-cutting service up to 305mm diameter. Polishing can also be arranged. To protect sheet surfaces, we can cover them in standard 2thou or 4thou thick poly-coating.
Copper’s most common specifications are C101 and C106. Other grades are available upon request. For information on any technical specifications, please enquire.
Copper isThe most electrically conductive of any commercial metal
A good thermal conductor
Corrosion resistant
Non-magnetic and non-sparking
Hygienic
Aesthetically pleasing
Easy to fabricate
Strong
Good for springy applications
•
•
•
•
•
•
•
•
•
We stock a wide range of standard sizes - the following pages list the most commonly requested items. We can also offer many non-standard products on request.
Copper
ASC Metals Page 25 Copper
Copper round bar
Size Weight kg/m
1/8” 0.07
3/16” 0.159
5mm 0.175
6mm 0.253
1/4” 0.282
5/16” 0.442
8mm 0.45
3/8” 0.637
10mm 0.703
7/16” 0.867
12mm 1.01
1/2” 1.13
9/16” 1.44
15mm 1.58
5/8” 1.76
11/16” 1.77
3/4” 2.55
20mm 2.82
22mm 3.4
7/8” 3.47
25mm 4.39
1” 4.54
1 1/8” 5.73
Size Weight kg/m
30mm 6.33
1 1/4” 7.08
1 3/8” 8.52
35mm 8.61
1 1/2” 10.19
1 3/4” 13.89
2” 18
2 1/4” 22.8
2 1/2” 28.2
2 3/4” 34.1
3” 40.6
3 1/4” 45.3
3 1/2” 55.51
3 3/4” 63.74
4” 72.2
4 1/2” 91.77
5” 113.32
5 1/2” 136.8
6” 163.02
6 1/2” 190.38
7” 224.58
7 1/2” 254.22
8” 291.84
Copper sheet
Size (Metric) Weight per sheet
2m x 1m x 0.9mm 16
2m x 1m x 1.2mm 21.4
2m x 1m x 1.5mm 26.7
2m x 1m x 2mm 35.6
2m x 1m x 3mm 53.4
Size (Imperial) Weight per sheet
4ft x 2ft x 24swg/0.5mm 3.64
4ft x 2ft x 22swg/0.7mm 4.63
4ft x 2ft x 20swg/0.9mm 5.95
4ft x 2ft x 18swg/1.2mm 7.94
4ft x 2ft x 16swg/1.5mm 10.6
4ft x 2ft x 14swg/2mm 13.2
4ft x 2ft x 12swg/2.5mm 17.46
4ft x 2ft x 10swg/3mm 21.5
ASC Metals Page 26 Copper
CopperCopper flat bar
Size Weight kg/m
1/2” x 1/8” 0.36
1/2” x 1/4” 0.72
3/4” x 1/8” 0.54
3/4” x 3/16” 0.8
3/4” x 1/4” 1.08
1” x 1/8” 0.72
1” x 3/16” 1.08
1” x 1/4” 1.43
1” x 3/8” 2.17
1” x 1/2” 2.85
1 1/4” x 1/8” 0.9
1 1/4” x 3/16” 1.35
1 1/4” x 1/4” 1.79
1 1/2” x 1/8” 1.08
1 1/2” x 3/16” 1.6
1 1/2” x 1/4” 2.15
1 1/2” x 3/8” 3.23
1 1/2” x 1/2” 4.31
1 1/2” x 3/4” 6.38
2” x 1/8” 1.43
2” x 3/16” 2.15
2” x 1/4” 2.87
2” x 3/8” 4.31
2” x 1/2” 5.74
2” x 3/4” 8.61
2” x 1” 11.4
3” x 1/8” 2.17
3” x 1/4” 4.33
3” x 1/2” 8.61
4” x 1/4” 5.7
Copper square bar
Size Weight kg/m
3/8” 0.82
1/2” 1.48
5/8” 2.28
3/4” 3.31
7/8” 4.56
1” 5.7
1 1/4” 9
1 1/2” 12.88
2” 22.8
2 1/2” 35.91
3” 52.44
ASC Metals Page 27 Brass
BrassASC Metals Lincoln Ltd. holds a range of brass in stock, including:
Sheet
Angle
Round bar
Square
Tube
Flat
Hexagon
•
•
•
•
•
•
•
We provide a guillotining service for sheet and a bar-cutting service up to 305mm diameter. To protect sheet surfaces, we can cover them in standard 2thou or 4thou thick poly-coating.
Brass’s most common specifications are CZ106, CZ108, CZ112 and CZ121. Other grades are available upon request For information on any technical specifications, please enquire. The term “brass” covers a wide range of copper-zinc alloys with differing properties for different applications.
Strong
Ductile
Hard
Conductive
Easy to machine
Corrosion and wear resistant
Aesthetically pleasing
Cost effective
Long lasting
•
•
•
•
•
•
•
•
•
Brass is
We stock a wide range of standard sizes - the following pages list the most commonly requested items. We can also offer many non-standard products on request.
Brass
ASC Metals Page 28 Brass
Size Weight per sheet
4ft x 2ft x 0.55mm 3.45
4ft x 2ft x 0.70mm 4.4
4ft x 2ft x 0.90mm 5.65
4ft x 2ft x 1.22mm 7.54
4ft x 2ft x 1.63mm 10
4ft x 2ft x 2mm 12.6
4ft x 2ft x 3.25mm 20.4
2m x 1m x 0.55mm 9.3
2m x 1m x 0.70mm 11.8
2m x 1m x 0.90mm 15.2
2m x 1m x 1.2mm 20.3
2m x 1m x 1.5mm 25.3
2m x 1m x 2mm 33.8
2m x 1m x 3mm 50.7
Brass sheet
Brass angle Size Weight kg/m
1/2” x 1/2” x 1/16” 0.328
1/2” x 1/2” x 1/8” 0.615
3/4” x 3/4” x 1/16” 0.505
3/4” x 3/4” x 1/8” 0.94
1” x 1” x 1/16” 0.69
1” x 1” x 1/8” 1.29
1 1/4” x 1 1/4” x 1/8” 1.63
1 1/2” x 1 1/2” x 1/8” 1.97
1 1/2” x 1 1/2” x 3/16” 2.39
2” x 2” x 1/8” 2.66
2” x 2” x 3/16” 3.99
2” x 2” x 1/4” 5.14
ASC Metals Page 29 Brass
BrassDia. Weight kg/m
1/8” 0.066
3/16” 0.151
5mm 0.166
6mm 0.239
1/4” 0.267
5/16” 0.419
8mm 0.426
3/8” 0.603
10mm 0.666
7/16” 0.821
12mm 0.959
1/2” 1.073
9/16” 1.36
15mm 1.5
5/8” 1.63
11/16” 2.03
3/4” 2.42
20mm 2.67
22mm 3.22
7/8” 3.28
25mm 4.16
1” 4.3
1 1/8” 5.43
Dia. Weight kg/m
30mm 5.99
1 1/4” 6.71
1 3/8” 8.07
35mm 8.15
1 1/2” 9.66
1 3/4” 13.15
2” 17.17
2 1/4” 21.74
2 1/2” 26.84
2 3/4” 32.48
3” 38.62
3 1/4” 45.36
3 1/2” 52.59
3 3/4” 60.38
4” 68.71
4 1/2” 86.94
5” 107.35
5 1/2” 129.6
6” 154.44
6 1/2” 180.36
7” 212.76
7 1/2” 240.84
8” 276.48
Brass round bar
Size Weight kg/m
1/4” 0.34
3/8” 0.77
1/2” 1.37
5/8” 2.14
3/4” 3.08
7/8” 4.2
1” 5.48
1.1/4” 8.57
1.1/2” 12.3
2” 21.9
2.1/2” 34
3” 49.4
Brass square
Brass
ASC Metals Page 30 Brass
OD Wall thickness Weight kg/m
1/2” 18swg 0.378
16swg 0.48
5/8” 18swg 0.475
16swg 0.626
3/4” 18swg 0.58
16swg 0.75
10swg 1.41
7/8” 16swg 0.83
1” 18swg 0.78
16swg 1.03
10swg 1.91
1 1/4” 18swg 1
16swg 1.3
10swg 2.55
1 1/2” 16swg 1.57
10swg 3.03
1 3/4” 16swg 1.85
10swg 3.69
2” 16swg 2.2
10swg 4.13
2 1/4” 16swg 2.48
10swg 4.83
2 1/2” 16swg 2.67
10swg 5.41
3” 16swg 3.22
10swg 6.58
4” 16swg 4.47
10swg 8.85
Brass tube
ASC Metals Page 31 Brass
BrassSize Weight kg/m
0.248 A/F 0.296
0.324 A/F 0.5
0.375 A/F 0.67
0.413 A/F 0.78
0.437 A/F 0.91
0.445 A/F 0.94
0.500 A/F 1.183
0.525 A/F 1.31
0.562 A/F 1.5
0.600 A/F 1.71
0.625 A/F 1.85
0.700 A/F 2.31
0.750 A/F 2.67
0.820 A/F 3.19
0.875 A/F 3.69
0.920 A/F 4.02
0.937 A/F 4.21
1.01 A/F 4.84
1.062 A/F 5.36
1.1 A/F 5.7
1.3 A/F 8.03
1.48 A/F 10.4
1.67 A/F 13.2
1.86 A/F 16.4
Some metric sizes are available
Brass hexagon
Size Weight kg/m
1/2” x 1/8” 0.34
1/2” x 1/4” 0.69
3/4” x 1/8” 0.51
3/4” x 3/16” 0.77
3/4” x 1/4” 1.03
1” x 1/8” 0.69
1” x 3/16” 1.03
1” x 1/4” 1.37
1” x 3/8” 2.05
1” x 1/2” 2.7
1 1/4” x 1/8” 0.86
1 1/4” x 3/16” 1.3
1 1/4” x 1/4” 1.73
1 1/2” x 1/8” 1.03
1 1/2” x 3/16” 1.51
1 1/2” x 1/4” 2.05
1 1/2” x 3/8” 3.08
1 1/2” x 1/2” 4.1
1 1/2” x 3/4” 6.11
2” x 1/8” 1.35
2” x 3/16” 2.05
2” x 1/4” 2.7
2” x 3/8” 4.1
2” x 1/2” 5.4
2” x 3/4” 8.1
2” x 1” 11
3” x 1/8” 2.05
3” x 1/4” 4.1
3” x 1/2” 8.23
4” x 1/4” 5.4
Brass flat
Phosphor Bronze
ASC Metals Page 32 Phosphor Bronze
ASC Metals Lincoln Ltd. holds a range of phosphor bronze in stock, including:
Hollow bar
Round bar
•
•
Phosphor bronze’s most common specifications are PB1, PB102 and SAE 660 (leaded bronze). Other grades are available upon request. For information on any technical specifications, please enquire.
Phosphor bronze isCorrosion resistant
A good conductor of electricity
A good thermal conductor
Good for bearings, bushes and gears
Non-magentic
Easy to machine
•
•
•
•
•
•
We stock a wide range of standard sizes - the following pages list the most commonly requested items. We can also offer many non-standard products on request.
Billet and cutting to length services (up to 305mm diameter) and special order castings are available.