Alumax ProLine Slider (Left Close) 06-2015 DEALER NAME: ____________________ JOB NAME: _______________________ HARDWARE FINISH Polished Stainless Brushed Stainless Oil Rubbed Bronze NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS FOR USE BY ALUMAX CSR ABE REF # ______________________________ $ ______________________________ GLASS TYPE CLEAR STARPHIRE OBSCURE RAIN SATIN ETCH OTHER ____________ HANDLE OPTIONS 6" BTB Tubular Pull 8" BTB Tubular Pull 8" BTB Square Pull (S) 2-1/2" BTB Recess Pull Solid (P) 1-1/2" BTB Recess Pull Open (T) 16" Straight Handle (1) 16" Curve Handle (2) 16" Twisted Handle (3) 16" Flat Handle (4) 16" Tube Handle (5) Customer Supplied # of holes required _____ Specify location on drawing www.alumaxshowerdoor.com ENDUROSHIELD YES NO Minimum Width 45" Maximum Height 80" Maximum Width 72" PL 60 PL 70 PL 80 UNIT TYPE
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Alumax ProLine Slider (Left Close)
06-2015
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISHPolished Stainless Brushed StainlessOil Rubbed Bronze
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________
$ ______________________________
GLASS TYPECLEAR STARPHIRE OBSCURE RAIN SATIN ETCH OTHER ____________
HANDLE OPTIONS
6" BTB Tubular Pull 8" BTB Tubular Pull 8" BTB Square Pull (S) 2-1/2" BTB Recess Pull Solid (P) 1-1/2" BTB Recess Pull Open (T)16" Straight Handle (1) 16" Curve Handle (2) 16" Twisted Handle (3) 16" Flat Handle (4) 16" Tube Handle (5) Customer Supplied
# of holes required _____Specify location on drawing
www.alumaxshowerdoor.com
ENDUROSHIELDYESNO
Minimum Width 45"
Maximum Height 80"
Maximum Width 72"
PL 60
PL 70
PL 80
UNIT TYPE
Alumax ProLine Slider (Right Close)
06-2015
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISHPolished Stainless Brushed StainlessOil Rubbed Bronze
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________
$ ______________________________
GLASS TYPECLEAR STARPHIRE OBSCURE RAIN SATIN ETCH OTHER ____________
HANDLE OPTIONS
# of holes required _____Specify location on drawing
www.alumaxshowerdoor.com
ENDUROSHIELDYESNO
Minimum Width 45"
Maximum Height 80"
Maximum Width 72"
PL 60
PL 70
PL 80
UNIT TYPE
6" BTB Tubular Pull 8" BTB Tubular Pull 8" BTB Square Pull (S) 2-1/2" BTB Recess Pull Solid (P) 1-1/2" BTB Recess Pull Open (T)16" Straight Handle (1) 16" Curve Handle (2) 16" Twisted Handle (3) 16" Flat Handle (4) 16" Tube Handle (5) Customer Supplied
Alumax PL90 with WTG Hinges (Left)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________ $ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 (72" HT) 28 X 75 1/2 (76" HT) 28 X 79 1/2 (80" HT) 28 X 28 1/4 X 71 1/2 (72" HT) 28 X 28 1/4 X 75 1/2 (76" HT) 28 X 28 1/4 X 79 1/2 1/2 (80" HT) CUSTOM SIZE
www.alumaxshowerdoor.com
Alumax PL90 with WTG Hinges (Right)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________ $ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 (72" HT) 28 X 75 1/2 (76" HT) 28 X 79 1/2 (80" HT) 28 X 28 1/4 X 71 1/2 (72" HT) 28 X 28 1/4 X 75 1/2 (76" HT) 28 X 28 1/4 X 79 1/2 1/2 (80" HT) CUSTOM SIZE
www.alumaxshowerdoor.com
Alumax PL91 with WTG Hinges (Left)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________ $ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 (72" HT) 28 X 75 1/2 (76" HT) 28 X 79 1/2 (80" HT) 28 X 28 1/4 X 71 1/2 (72" HT) 28 X 28 1/4 X 75 1/2 (76" HT) 28 X 28 1/4 X 79 1/2 1/2 (80" HT) CUSTOM SIZE
www.alumaxshowerdoor.com
Alumax PL91 with WTG Hinges (Right)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________ $ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 (72" HT) 28 X 75 1/2 (76" HT) 28 X 79 1/2 (80" HT) 28 X 28 1/4 X 71 1/2 (72" HT) 28 X 28 1/4 X 75 1/2 (76" HT) 28 X 28 1/4 X 79 1/2 1/2 (80" HT) CUSTOM SIZE
www.alumaxshowerdoor.com
Alumax PL91 with GTG Hinges, Header Bar/Support (Left)
2015
DEALER NAME: ____________________JOB NAME: _______________________HARDWARE FINISH
CHROME BRUSHED NICKEL OIL RUBBED BRONZE
HEADER BAR OPTIONSSC-505 SC-923 SC-644 SC-646GTW Support BarPivot Support Bar 20"Pivot Support Bar 36"
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS FOR USE BY ALUMAX CSR
ABE REF # ______________________________$ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 28 X 75 1/2 28 X 79 1/2 28 X 28 1/4 X 71 1/2 28 X 28 1/4 X 75 1/2 28 X 28 1/4 X 79 1/2 1/2 CUSTOM SIZE
www.alumaxshowerdoor.com
Alumax PL91 with GTG Hinges, Header Bar/Support (Right)
2015
DEALER NAME: ____________________JOB NAME: _______________________HARDWARE FINISH
CHROME BRUSHED NICKEL OIL RUBBED BRONZE HEADER BAR OPTIONS
SC-505 SC-923 SC-644 SC-646GTW Support BarPivot Support Bar 20"Pivot Support Bar 36"
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________
$ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 28 X 75 1/2 28 X 79 1/2 28 X 28 1/4 X 71 1/2 28 X 28 1/4 X 75 1/2 28 X 28 1/4 X 79 1/2 1/2 CUSTOM SIZE
www.alumaxshowerdoor.com
SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
Alumax PL91 with WTG Hinges and Buttress (Right)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________ $ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 (72" HT) 28 X 75 1/2 (76" HT) 28 X 79 1/2 (80" HT) 28 X 28 1/4 X 71 1/2 (72" HT) 28 X 28 1/4 X 75 1/2 (76" HT) 28 X 28 1/4 X 79 1/2 1/2 (80" HT) CUSTOM SIZE
www.alumaxshowerdoor.com
Alumax PL91 with WTG Hinges and Buttress (Left)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________ $ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 (72" HT) 28 X 75 1/2 (76" HT) 28 X 79 1/2 (80" HT) 28 X 28 1/4 X 71 1/2 (72" HT) 28 X 28 1/4 X 75 1/2 (76" HT) 28 X 28 1/4 X 79 1/2 1/2 (80" HT) CUSTOM SIZE
www.alumaxshowerdoor.com
Alumax PL91 with WTG Hinges and Notched Buttress (Left)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________ $ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 (72" HT) 28 X 75 1/2 (76" HT) 28 X 79 1/2 (80" HT) 28 X 28 1/4 X 71 1/2 (72" HT) 28 X 28 1/4 X 75 1/2 (76" HT) 28 X 28 1/4 X 79 1/2 1/2 (80" HT) CUSTOM SIZE
www.alumaxshowerdoor.com
Alumax PL91 with WTG Hinges and Notched Buttress (Right)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________ $ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 (72" HT) 28 X 75 1/2 (76" HT) 28 X 79 1/2 (80" HT) 28 X 28 1/4 X 71 1/2 (72" HT) 28 X 28 1/4 X 75 1/2 (76" HT) 28 X 28 1/4 X 79 1/2 1/2 (80" HT) CUSTOM SIZE
www.alumaxshowerdoor.com
Alumax PL91 with WTG Hinges, Header Bar and Notched Buttress (Left)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
HEADER BAR OPTIONS SC-505 SC-923 SC-644 SC-646
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________ $ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 28 X 75 1/2 28 X 79 1/2 28 X 28 1/4 X 71 1/2 28 X 28 1/4 X 75 1/2 28 X 28 1/4 X 79 1/2 1/2 CUSTOM SIZE
www.alumaxshowerdoor.com
Alumax PL91 with WTG Hinges, Header Bar and Notched Buttress (Right)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
HEADER BAR OPTIONS SC-505 SC-923 SC-644 SC-646
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________ $ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 28 X 75 1/2 28 X 79 1/2 28 X 28 1/4 X 71 1/2 28 X 28 1/4 X 75 1/2 28 X 28 1/4 X 79 1/2 1/2 CUSTOM SIZE
www.alumaxshowerdoor.com
Alumax PL91 with GTG Hinges, Header Bar and Notched Buttress (Left)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
HEADER BAR OPTIONS SC-505 SC-923 SC-644 SC-646
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________ $ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 28 X 75 1/2 28 X 79 1/2 28 X 28 1/4 X 71 1/2 28 X 28 1/4 X 75 1/2 28 X 28 1/4 X 79 1/2 1/2 CUSTOM SIZE
www.alumaxshowerdoor.com
Alumax PL91 with GTG Hinges, Header Bar and Notched Buttress (Right)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
HEADER BAR OPTIONS SC-505 SC-923 SC-644 SC-646
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________ $ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 28 X 75 1/2 28 X 79 1/2 28 X 28 1/4 X 71 1/2 28 X 28 1/4 X 75 1/2 28 X 28 1/4 X 79 1/2 1/2 CUSTOM SIZE
www.alumaxshowerdoor.com
Alumax PL91 with Top/Bottom Pivot Hinges, Header Bar and Notched Buttress (Left)
05-2015
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
HEADER BAR OPTIONS SC-505 SC-923 SC-644 SC-646
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________
$ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED SQUARE
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 74 1/2 28 X 76 1/2 28 X 80 1/2
www.alumaxshowerdoor.com
Alumax PL91 with Top/Bottom Pivot Hinges, Header Bar and Notched Buttress (Right) DEALER NAME: ____________________
JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
HEADER BAR OPTIONS SC-505 SC-923 SC-644 SC-646
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________
$ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED SQUARE
DOOR BLANK OPTIONS(IF APPLICABLE)
www.alumaxshowerdoor.com
28 X 74 1/2 28 X 76 1/2 28 X 80 1/2
05-2015
Alumax PL92 with WTG Hinges (Right)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________ $ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 (72" HT) 28 X 75 1/2 (76" HT) 28 X 79 1/2 (80" HT) 28 X 28 1/4 X 71 1/2 (72" HT) 28 X 28 1/4 X 75 1/2 (76" HT) 28 X 28 1/4 X 79 1/2 1/2 (80" HT) CUSTOM SIZE
www.alumaxshowerdoor.com
90°
Alumax PL92 with WTG Hinges (Left)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________ $ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 (72" HT) 28 X 75 1/2 (76" HT) 28 X 79 1/2 (80" HT) 28 X 28 1/4 X 71 1/2 (72" HT) 28 X 28 1/4 X 75 1/2 (76" HT) 28 X 28 1/4 X 79 1/2 1/2 (80" HT) CUSTOM SIZE
www.alumaxshowerdoor.com
90°
Alumax PL93 with WTG Hinges (Right)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
90° BRACKET OPTIONS GLASS TO GLASS SLEEVE OVER
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________ $ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 (72" HT) 28 X 75 1/2 (76" HT) 28 X 79 1/2 (80" HT) 28 X 28 1/4 X 71 1/2 (72" HT) 28 X 28 1/4 X 75 1/2 (76" HT) 28 X 28 1/4 X 79 1/2 1/2 (80" HT) CUSTOM SIZE
www.alumaxshowerdoor.com
90°
Alumax PL93 with WTG Hinges (Right)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
90° BRACKET OPTIONS GLASS TO GLASS SLEEVE OVER
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________ $ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 (72" HT) 28 X 75 1/2 (76" HT) 28 X 79 1/2 (80" HT) 28 X 28 1/4 X 71 1/2 (72" HT) 28 X 28 1/4 X 75 1/2 (76" HT) 28 X 28 1/4 X 79 1/2 1/2 (80" HT) CUSTOM SIZE
www.alumaxshowerdoor.com
90°
Alumax PL93 with WTG Hinges and Notched Butress (Right)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
CORNER OPTIONS GLASS TO GLASS CLIP SLEEVE OVER BUTT JOINTRIGHT OVER LEFTLEFT OVER RIGHTMITER
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS FOR USE BY ALUMAX CSR
ABE REF # ______________________________$ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 (72" HT) 28 X 75 1/2 (76" HT) 28 X 79 1/2 (80" HT) 28 X 28 1/4 X 71 1/2 (72" HT) 28 X 28 1/4 X 75 1/2 (76" HT) 28 X 28 1/4 X 79 1/2 1/2 (80" HT) CUSTOM SIZE
www.alumaxshowerdoor.com
90°
Clip only shown as one option. Must specify on left what is required.
Alumax PL93 with WTG Hinges and Notched Butress (Left)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
CORNER OPTIONS GLASS TO GLASS SLEEVE OVERBUTT JOINTRIGHT OVER LEFTLEFT OVER RIGHTMITER
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONSFOR USE BY ALUMAX CSR
ABE REF # ______________________________$ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 (72" HT) 28 X 75 1/2 (76" HT) 28 X 79 1/2 (80" HT) 28 X 28 1/4 X 71 1/2 (72" HT) 28 X 28 1/4 X 75 1/2 (76" HT) 28 X 28 1/4 X 79 1/2 1/2 (80" HT) CUSTOM SIZE
www.alumaxshowerdoor.com
90°
Clip only shown as one option. Must specify on right what is required.
Alumax PL93 with GTG Hinges (Left)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
HEADER BAR OPTIONS SC-505 SC-923 SC-644 SC-646
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________ $ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 28 X 75 1/2 28 X 79 1/2 28 X 28 1/4 X 71 1/2 28 X 28 1/4 X 75 1/2 28 X 28 1/4 X 79 1/2 1/2 CUSTOM SIZE
www.alumaxshowerdoor.com
Odd Angle ___ 90°
Alumax PL93 with GTG Hinges (Right)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
HEADER BAR OPTIONS SC-505 SC-923 SC-644 SC-646
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________ $ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 28 X 75 1/2 28 X 79 1/2 28 X 28 1/4 X 71 1/2 28 X 28 1/4 X 75 1/2 28 X 28 1/4 X 79 1/2 1/2 CUSTOM SIZE
www.alumaxshowerdoor.com
Odd Angle ___ 90°
Alumax PL94 with GTG Hinges (Right)
2016
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
HEADER BAR OPTIONS SC-505 SC-923 SC-644 SC-646
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________
$ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 28 X 75 1/2 28 X 79 1/2 28 X 28 1/4 X 71 1/2 28 X 28 1/4 X 75 1/2 28 X 28 1/4 X 79 1/2 1/2 CUSTOM SIZE
www.alumaxshowerdoor.com
135° 135°
Alumax PL94 with GTG Hinges (Left)
2016
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
HEADER BAR OPTIONS SC-505 SC-923 SC-644 SC-646
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________
$ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 28 X 75 1/2 28 X 79 1/2 28 X 28 1/4 X 71 1/2 28 X 28 1/4 X 75 1/2 28 X 28 1/4 X 79 1/2 1/2 CUSTOM SIZE
www.alumaxshowerdoor.com
135° 135°
Alumax PL94 with Top/Bottom Pivot Hinges (Left)
2016
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
HEADER BAR OPTIONS SC-505 SC-923 SC-644 SC-646
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________
$ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED SQUARE
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 28 X 75 1/2 28 X 79 1/2 28 X 28 1/4 X 71 1/2 28 X 28 1/4 X 75 1/2 28 X 28 1/4 X 79 1/2 1/2 CUSTOM SIZE
www.alumaxshowerdoor.com
135° 135°
Alumax PL94 with Top/Bottom Pivot Hinges (Right)
2016
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
HEADER BAR OPTIONS SC-505 SC-923 SC-644 SC-646
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________
$ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED SQUARE
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 28 X 75 1/2 28 X 79 1/2 28 X 28 1/4 X 71 1/2 28 X 28 1/4 X 75 1/2 28 X 28 1/4 X 79 1/2 1/2 CUSTOM SIZE
www.alumaxshowerdoor.com
135° 135°
Alumax PL94 with Top/Bottom Pivot Hinges and Buttress (Left)
2016
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
HEADER BAR OPTIONS SC-505 SC-923 SC-644 SC-646
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________
$ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED SQUARE
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 28 X 75 1/2 28 X 79 1/2 28 X 28 1/4 X 71 1/2 28 X 28 1/4 X 75 1/2 28 X 28 1/4 X 79 1/2 1/2 CUSTOM SIZE
www.alumaxshowerdoor.com
135° 135°
Alumax PL94 with Top/Bottom Pivot Hinges and Buttress (Right)
2016
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
HEADER BAR OPTIONS SC-505 SC-923 SC-644 SC-646
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________
$ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED SQUARE
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 28 X 75 1/2 28 X 79 1/2 28 X 28 1/4 X 71 1/2 28 X 28 1/4 X 75 1/2 28 X 28 1/4 X 79 1/2 1/2 CUSTOM SIZE
www.alumaxshowerdoor.com
135° 135°
Alumax PL95 with GTG Hinges (Right)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
HEADER BAR OPTIONS SC-505 SC-923 SC-644 SC-646
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________ $ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 28 X 75 1/2 28 X 79 1/2 28 X 28 1/4 X 71 1/2 28 X 28 1/4 X 75 1/2 28 X 28 1/4 X 79 1/2 1/2 CUSTOM SIZE
www.alumaxshowerdoor.com
Alumax PL95 with GTG Hinges (Left)
09-2012
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
HEADER BAR OPTIONS SC-505 SC-923 SC-644 SC-646
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________ $ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED BEVELED ADJUSTABLE BEVELED OFFSET SQUARE SQUARE ADJUSTABLE SQUARE OFFSET
DOOR BLANK OPTIONS(IF APPLICABLE)
28 X 71 1/2 28 X 75 1/2 28 X 79 1/2 28 X 28 1/4 X 71 1/2 28 X 28 1/4 X 75 1/2 28 X 28 1/4 X 79 1/2 1/2 CUSTOM SIZE
www.alumaxshowerdoor.com
Alumax PL95 with Top/Bottom Pivot Hinges (Right)
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
HEADER BAR OPTIONS SC-505 SC-923 SC-644 SC-646
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________
$ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED SQUARE
DOOR BLANK OPTIONS(IF APPLICABLE)
www.alumaxshowerdoor.com
28 X 74 1/2 28 X 76 1/2 28 X 80 1/2
05-2015
Alumax PL95 with Top/Bottom Pivot Hinges (Left)
DEALER NAME: ____________________JOB NAME: _______________________
HARDWARE FINISH CHROME BRUSHED NICKEL OIL RUBBED BRONZE
HEADER BAR OPTIONS SC-505 SC-923 SC-644 SC-646
WALL MOUNT OPTIONS SC-505 SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
CURB MOUNT OPTIONS SC-505A SC-658 for WET GLAZE SC-657 for WET GLAZE NOTCHED CLIPS NOTCHLESS CLIPS
NOTE ALL OUT OF PLUMB/LEVEL/SQUARE CONDITIONS
FOR USE BY ALUMAX CSRABE REF # ______________________________
$ ______________________________
GLASS TYPE 3/8" CLEAR ENDUROSHIELD OBSCURE RAIN MIST OTHER
HINGE OPTIONS BEVELED SQUARE
DOOR BLANK OPTIONS(IF APPLICABLE)
www.alumaxshowerdoor.com
28 X 74 1/2 28 X 76 1/2 28 X 80 1/2
05-2015
Related Documents
