3 P + N /5 W 3 P /4 W 2 P / 3 W 12 6 346Y/200V AC 415Y/240V AC 480Y/277V 600Y/347V 480V AC 600V AC 400V AC 250V AC 120/250V AC 480V AC 277V AC 120V AC 250V AC 208Y/120V 380V AC 440V AC 1 11 2 10 3 9 4 8 5 7 6h PE L1 L2 L3 N 9h PE L1 L2 L3 N COLOR CODING AND GROUND PIN POSITIONS Pin and Sleeve devices are color coded to provide positive voltage and frequency matching and external key- ways ensure correct alignment of contact pins. The position of the ground pin relative to the socket's key-way are designated as a clock hour position. The ground terminal also has a larger diameter than the contacts, making it impossible to install in an IEC 60309 device with a different voltage rating. Front view of receptacle/connector to contact barrier line of industrial plugs and sockets are manufactured by ABL Sursum, a company well known in Europe for its quality electrical products. This major manufacturer combines the elements of good design, high quality, safety, ease of installation and competitive cost. The pin and sleeve devices are manufactured to EN 60309 Part 1 and 2: IEC 60309. Their rugged construction in polyamide 6 material provides good anti-tracking properties and high resistance to aggressive industrial use. In accordance with the Standard's requirements, these devices are color coded to provide positive voltage and frequency matching and external key-ways ensure correct alignment of contact pins. The position of the ground pin relative to the socket's key-way are designated as a clock hour position. The ground terminal also has a larger diameter than the contacts, making it impossible to install it in an IEC 60309 device with a different voltage rating. The shrouded housing made of high impact nylon material protects the contacts from physical abuse and safeguards against touching live parts when partially engaged. All terminals are clearly marked in both IEC 60309 and North American Standards. Assembly is simple and quick with the help of the multi- ramp locking system. Parts are delivered in a half unlocked stage to make initial assembly straightforward. 1. Match triangle icons for both housings in open position. 2. Twist counter-clockwise until locked as per above figure. FEATURE 20-30A plugs, connectors, and angled inlets PIN & SLEEVE DEVICES Voltage Configuration Chart Altech Corp. ® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Features include: • High impact and abrasion resistance • Resistant to oil, petrol, most acids and alkalines • Operating Temperature range -13°F to 176°F (-25°C to 80°C) • Excellent anti-tracking • Grooved body improves hand grip • Insulated cable clamp device • Maximum wiring space • Terminals clearly marked • All screws are accessible from one side
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
3P+N/5W
3P/4W
2P/3W
12
6
346Y/200V AC415Y/240V AC
480Y/277V 600Y/347V
480V AC 600V AC
400V AC
250V AC
120/250V AC
480V AC 277V AC
120V AC250V AC208Y/120V 380V AC
440V AC
111210
3948
57
6h
PE
L1
L2 L3
N
9h
PE
L1
L2
L3N
COLOR CODING ANDGROUND PIN POSITIONSPin and Sleeve devices are color coded to providepositive voltage and frequency matching and external key-ways ensure correct alignment of contact pins. Theposition of the ground pin relative to the socket's key-wayare designated as a clock hour position.
The ground terminal also has a larger diameter than thecontacts, making it impossible to install in an IEC 60309device with a different voltage rating.
Front view of receptacle/connector to contact barrier
line of industrial plugs and sockets aremanufactured by ABL Sursum, a company well known inEurope for its quality electrical products. This majormanufacturer combines the elements of good design,high quality, safety, ease of installation and competitivecost. The pin and sleeve devices are manufactured to EN60309 Part 1 and 2: IEC 60309. Their rugged constructionin polyamide 6 material provides good anti-trackingproperties and high resistance to aggressive industrialuse.
In accordance with the Standard's requirements, thesedevices are color coded to provide positive voltage andfrequency matching and external key-ways ensure correctalignment of contact pins. The position of the ground pinrelative to the socket's key-way are designated as a clockhour position.
The ground terminal also has a larger diameter than thecontacts, making it impossible to install it in an IEC 60309device with a different voltage rating.
The shrouded housing made of high impact nylon materialprotects the contacts from physical abuse and safeguardsagainst touching live parts when partially engaged.
All terminals are clearly marked in both IEC 60309 andNorth American Standards.
Assembly is simple and quick with the help of the multi-ramp locking system. Parts are delivered in a half unlockedstage to make initial assembly straightforward.
1. Match triangle icons for both housings in open position.2. Twist counter-clockwise until locked as per above figure.
Features include:• High impact and abrasion resistance• Resistant to oil, petrol, most acids and alkalines• Operating Temperature range
-13°F to 176°F (-25°C to 80°C)• Excellent anti-tracking• Grooved body improves hand grip• Insulated cable clamp device• Maximum wiring space• Terminals clearly marked• All screws are accessible from one side
Altech Corporation35 Royal RoadFlemington, NJ 08822-6000Phone (908) 806-9400Fax (908) 806-9490www.altechcorp.com
Certified for current interrupting at full rated current
IEC: 16 Amp. (A) = 5000 at a power factor of 0.6 63/60 Amp. (A) = 1,000 @ a p.f. of 0.632 Amp. (A) = 1000 at a power factor of 0.6 100/125 Amp. (A) = 1,000 @ a p.f. of 0.7
UL: 20 Amp. (A) = 5000 at a power factor of 0.75-0.8030 Amp. (A) = 1000 at a power factor of 0.75-0.80
Electrical
Temperature Range, Operating
Temperature Resistance
Moisture Resistance
Flammability
-25°C to + 80°C (-13°F to + 176°F)
Up to 1 hour +100°C (167°F)
Splashproof IP 44; Watertight IP 67; Per IEC 60309-1, Clause 18
per IEC 60309-1 / Clause 27Flame Class Rating UL 94 or CSA C22.2 No. 0.17: V-2
* Please refer to National Electric Code, to determine wire size for different Amp Ratings.
Recommended Screw Torque for Terminal Set Screws
3P+N/5W
3P/4W
2P/3W
12
6
346Y/200V AC415Y/240V AC
480Y/277V 600Y/347V
480V AC 600V AC
400V AC
250V AC
120/250V AC
480V AC 277V AC
120V AC250V AC208Y/120V 380V AC
440V AC
111210
3948
57
6h
PE
L1
L2 L3
N
9h
PE
L1L2
L3N
COLOR CODING ANDGROUND PIN POSITIONSPin and Sleeve devices are color coded to provide positivevoltage and frequency matching and external key-waysensure correct alignment of contact pins. The position ofthe ground pin relative to the socket's key-way aredesignated as a clock hour position.
The ground terminal also has a larger diameter than thecontacts, making it impossible to install in an IEC 60309device with a different voltage rating.
Front view of receptacle/connector to contact barrier
line of industrial plugs and sockets aremanufactured by ABL Sursum, a company well known inEurope for its quality electrical products. This majormanufacturer combines the elements of good design, highquality, safety, ease of installation and competitive cost.The pin and sleeve devices are manufactured to EN60309 Part 1 and 2: IEC 60309. Their rugged constructionin polyamide 6 material provides good anti-trackingproperties and high resistance to aggressive industrialuse.
In accordance with the Standard's requirements, thesedevices are color coded to provide positive voltage andfrequency matching and external key-ways ensure correctalignment of contact pins. The position of the ground pinrelative to the socket's key-way are designated as a clockhour position.
The ground terminal also has a larger diameter than thecontacts, making it impossible to install it in an IEC 60309device with a different voltage rating.
The shrouded housing made of high impact nylon materialprotects the contacts from physical abuse and safeguardsagainst touching live parts when partially engaged.
All terminals are clearly marked in both IEC 60309 andNorth American Standards.
Assembly is simple and quick with the help of the multi-ramp locking system. Parts are delivered in a half unlockedstage to make initial assembly straightforward.
1. Match triangle icons for both housings in open position.2. Twist counter-clockwise until locked as per above figure.
Features include:• High impact and abrasion resistance• Resistant to oil, petrol, most acids and alkalines• Operating Temperature range-13°F to 176°F (-25°C to 80°C)• Excellent anti-tracking• Grooved body improves hand grip• Insulated cable clamp device• Maximum wiring space• Terminals clearly marked• All screws are accessible from one side
COLOR CODING ANDGROUND PIN POSITIONSPin and Sleeve devices are color coded to provide positivevoltage and frequency matching and external key-waysensure correct alignment of contact pins. The position ofthe ground pin relative to the socket's key-way aredesignated as a clock hour position.
The ground terminal also has a larger diameter than thecontacts, making it impossible to install in an IEC 60309device with a different voltage rating.
Front view of receptacle/connector to contact barrier
line of industrial plugs and sockets aremanufactured by ABL Sursum, a company well known inEurope for its quality electrical products. This majormanufacturer combines the elements of good design, highquality, safety, ease of installation and competitive cost.The pin and sleeve devices are manufactured to EN60309 Part 1 and 2: IEC 60309. Their rugged constructionin polyamide 6 material provides good anti-trackingproperties and high resistance to aggressive industrialuse.
In accordance with the Standard's requirements, thesedevices are color coded to provide positive voltage andfrequency matching and external key-ways ensure correctalignment of contact pins. The position of the ground pinrelative to the socket's key-way are designated as a clockhour position.
The ground terminal also has a larger diameter than thecontacts, making it impossible to install it in an IEC 60309device with a different voltage rating.
The shrouded housing made of high impact nylon materialprotects the contacts from physical abuse and safeguardsagainst touching live parts when partially engaged.
All terminals are clearly marked in both IEC 60309 andNorth American Standards.
Assembly is simple and quick with the help of the multi-ramp locking system. Parts are delivered in a half unlockedstage to make initial assembly straightforward.
1. Match triangle icons for both housings in open position.2. Twist counter-clockwise until locked as per above figure.
Features include:• High impact and abrasion resistance• Resistant to oil, petrol, most acids and alkalines• Operating Temperature range-13°F to 176°F (-25°C to 80°C)• Excellent anti-tracking• Grooved body improves hand grip• Insulated cable clamp device• Maximum wiring space• Terminals clearly marked• All screws are accessible from one side