also available on our int ernet site www.neophane.i t +39.02.93269.1 +39.02.9302569 [email protected]http://www.neophane .it INFORMATIVE INFORMATIVE 1. EQUIPMENT (June 20th, 2007) next exit: 2. COMMERCIAL ACTIVITIES & MARKETING (July 20th, 2007) 3. In Depth discussion: Business lines and products (September 21st, 2007)
12
Embed
Also available on our internet site +39.02.93269.1 +39.02.9302569 [email protected] :// INFORMATIVE.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
also available on our internet site www.neophane.it
The machine consists of 2 units, both of which include applicating and laminating elements, to laminate in a single pass up to three-ply. It is possible to produce laminates of 4 or more layers using multiple passes on the machine.
In order to improve the adhesion capacity of films, the surfaces can be corona treated on the machine.
The machine consists of 2 The machine consists of 2
The slitting machines IMS DeltamaticIMS Deltamatic
(OFFICINE del MAGLIO)(OFFICINE del MAGLIO)
Reels are custom slit to the requested sizes. We have the following equipment in order to slit mother reels from the production machines, into the final dimensions:
• 2 slitting machines to supply reels on width minimum mm. 180, maximum mm. 1300 (for maximum 6 tracks), core mm. 70/76/152, maximum external diameter mm. 550;
• 1 slitting machine to supply reels on width minimum mm. 60, maximum mm. 200 (for maximum 17 tracks), core mm. 70/76/152, maximum external diameter mm. 550;
• 2 slitting machines to supply reels on width minimum mm. 90, maximum mm. 1300 (for maximum 9 tracks), core mm. 70/76/152, maximum external diameter mm. 400;
• 1 rewinding machine to rewind reels on width minimum mm. 60, maximum mm. 550, core mm.70/76/152, maximum external diameter mm. 500.
Inks for printing are supplied to the presses in compliance with the specified tonality: colours are formulated through the blending of the basic pigments in the mixing station.
All formulations are managed by software that can memorise all the recipes and reproduce them with minimal margin for error. Further to this, inks are checked with a spectrophotometer reader, that utilises the CIE-LAB method system of measurement.
Solvent recovery plantThanks to this new plant, Neophane has gas-
emissions near to zero, that have been 100% checked and verified.
Neophane recovers from raw materials (primarily from adhesives and inks) a higher quantity of solvent than it uses in its production.
This plant uses technology founded on the absorption of organic solvent through activated carbon, together with an exclusive system of regeneration of the same carbons using inert gas rather than water vapour: this way we have the double advantage of avoiding the pollution with contaminated processing water and the presence of humidity in the recovered solvent.
contaminated air, full of solvent, is taken from the presses to the recovery plant. Here is filtered, cooled and then sent to the absorption units. During this step, the solvent is held by the carbon while the purified air is flushed out.
A hydrocarbon analyser checks this flow: if the concentration of solvent reaches a predetermined limit, it begins the regeneration process via the injection of nitrogen.
The distillation unit can automatically separate the recovered solvents.
also available on our Internet site www.neophane.it since July 20th