Top Banner
LOGICS MYQ QUESTION How can I create a device that provides a problem solution, based on a digital logic?
18

All the information about the investigation stage should be placed in a blog or wiki that has to be created by the student. It should be published and.

Mar 31, 2015

Download

Documents

Jordan Jarrard
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: All the information about the investigation stage should be placed in a blog or wiki that has to be created by the student. It should be published and.

LOGICS MYQ QUESTION

How can I create a device that provides a

problem solution, based on a digital logic?

Page 2: All the information about the investigation stage should be placed in a blog or wiki that has to be created by the student. It should be published and.

PLAN INVESTIGATION

All the information about the investigation stage should be placed in a blog or wiki that has to be created by the student. It should be published and shared with the Teacher

Define following terms: Digital logic, Logic gate, Truth table, Integrated Circuit, Led, Breadboard, Breadboard jumpers. Every “term definition” should be illustrated by placing two pictures

  Compile the basic logic gates symbols   Sketch the true tables for the logic gates investigated before  Learn how to use a specific software (Logic Circuit Designer,

Atanua) to create digital circuits based on digital logic

Page 3: All the information about the investigation stage should be placed in a blog or wiki that has to be created by the student. It should be published and.

Definitions of

several words:

Page 4: All the information about the investigation stage should be placed in a blog or wiki that has to be created by the student. It should be published and.

The digital logic: 0 = false = no 

1 = true = yes

The digital logic or the binary logic is the system of the computers and it consists of two values numbers: 0 and 1. So 0 means false and 1 means true. Using this two-valued logic system, every statement or condition must be either "true" or "false. And the 1 mean close and is when the current CAN pass and 0 means open and current CANT passes by the circuit.

 

Page 5: All the information about the investigation stage should be placed in a blog or wiki that has to be created by the student. It should be published and.

DIGITAL LOGIC

Page 6: All the information about the investigation stage should be placed in a blog or wiki that has to be created by the student. It should be published and.

LOGIC GATE:

There are seven basic logic gates: AND, OR, NOT, NAND and NOR.

So the logic gate AND means that all the inputs need to be true (1) for the output (result) to be true otherwise it will be false.

The OR logic gate means that all the inputs need to be false for the output to be false otherwise it will be true the output.

The NOT gate means the opposite of the input, for example If one of the input were false (0) the opposite will be true (1).

The NAND is an AND gate with a NOT gate. It is the opposite of AND gate. For example if the result of a AND gate is true in the NAND gate it will be false.

Finally the NOR logic gate means is an OR gate with a NOT gate. This gate is the opposite of the OR gate, the result will be the opposite. If the result of OR gate is false in the NOR gate it will be true.

Page 7: All the information about the investigation stage should be placed in a blog or wiki that has to be created by the student. It should be published and.

LOGIC GATES

Page 8: All the information about the investigation stage should be placed in a blog or wiki that has to be created by the student. It should be published and.

True table

A truth table is a mathematical table used in logic. Practically, a truth table contains one column for each input variable (for example, A and B), and one final column for all of the possible results of the logical operation (for example, A XOR B).Each input must have a 1(true) or 0(false) value.

Page 9: All the information about the investigation stage should be placed in a blog or wiki that has to be created by the student. It should be published and.

True table

Page 10: All the information about the investigation stage should be placed in a blog or wiki that has to be created by the student. It should be published and.

An integrated circuit

Sometimes called a chip or microchip, are electronic circuits where all the components (transistors, diodes, resistors and capacitors) has been put into the surface of a thin substrate of semiconductor material. This Integrated circuits can be found in almost every modern electrical device; such as computers, cars, television etc.

Page 11: All the information about the investigation stage should be placed in a blog or wiki that has to be created by the student. It should be published and.

AN INTEGRATED CIRCUIT

Page 13: All the information about the investigation stage should be placed in a blog or wiki that has to be created by the student. It should be published and.

Breadboard:

A breadboard is used to build and test circuits quickly before finalizing the circuit. The breadboard has many holes in it, in which circuit components like ICs and resistors can be inserted.

Page 14: All the information about the investigation stage should be placed in a blog or wiki that has to be created by the student. It should be published and.

BREADBOARD

Page 15: All the information about the investigation stage should be placed in a blog or wiki that has to be created by the student. It should be published and.

Breadboard jumpers:

Are cables that permit to connect electronic devices.

Page 16: All the information about the investigation stage should be placed in a blog or wiki that has to be created by the student. It should be published and.

2,3. Compile the basic logic gates symbols and sketch true tables for each one(AND, OR, NOT, NAND and NOR.)

Page 18: All the information about the investigation stage should be placed in a blog or wiki that has to be created by the student. It should be published and.

 http://www.google.com.co/imgres?q=basic+logic+gates+symbols&um=1&hl=es&client=firefox-a&sa=N&rls=org.mozilla:en-US:official&tbm=isch&tbnid=34NL_KExZKJQ7M:&imgrefurl=http://www.cise.ufl.edu/~mssz/CompOrg/CDAintro.html&docid=Tm7Rhtz8tAr2HM&imgurl=http://www.cise.ufl.edu/~mssz/CompOrg/Figure1.13-AndOrTables.gif&w=354&h=249&ei=RkjeToKlJIry0gG4oZyhBw&zoom=1&iact=hc&vpx=1047&vpy=233&dur=2793&hovh=135&hovw=192&tx=67&ty=70&sig=107106619665380548530&page=2&tbnh=130&tbnw=185&start=17

&ndsp=19&ved=1t:429,r:12,s:17&biw=1280&bih=697

 http://www.siliconfareast.com/logicgates.htm

  http://www.ecse.rpi.edu/course

s/EI/breadboard.pdf