ALL PURPOSE CLEANER FORMULATIONS BY KAO

ALL PURPOSE CLEANER FORMULATIONS BY KAO

GUIDELINE FORMULARY

Kao Corporation, S.A.Member of Kao Chemicals EuropePuig dels Tudons, 10 -E-08210 - Barberà delVallèsTel. : +34-93-7399300 e-mail : [email protected] : +34-93-7399377 Web : www.kaochemicals-eu.com

1

KCE REFERENCE : D-005

ALL PURPOSE - NORMAL

DESCRIPTION

• Hard surfaces application detergent• Direct application product• It can be also used as floor cleaner, diluted at 5 g/L approx. in water• No rinse is needed

COMPOSITION %

ALFANOX 46 12.5LEVENOL C-201 2.5ICTEOL K-50 1.5Butyldiglycol 4.0Sodium Citrate 2.0Fragrance, Preservative, Dyes e.q.Deionized Water Up to 100%

TECHNICAL CHARACTERISTICSKao method

APPEARANCE (20ºC) : Transparent Liquid KCSA-258

COLOUR : Usually Green or Yellow KCSA-258

ODOUR : Usually Pine or Citric KCSA-267

pH (as it is) : Around 7.5 KCSA-014

BROOKFIELD VISCOSITY (20ºC) : Liquid – No viscous KCSA-227

DRY MATTER (%) : 12% approx. KCSA-092

mailto:[email protected]

http://www.kaochemicals-eu.com/

GUIDELINE FORMULARYKao Corporation S.A.(Member of KAO CHEMICALS EUROPE)


2PREVIOUS : AP07UP-DATED : 2007-08-06PRINTED : 2007-08-06

RECOMMENDED OPERATIVE METHOD

• Process at room temperature.

• Add ALFANOX 46, LEVENOL C-201 and ICTEOL K-50 to the water and stir till completesolubility. Continue with the addition of Butildiglycol and finally Sodium Citrate. After each additionstir till complete transparency.

• Continue with the addition of perfume, preservative and dyes.

COMMENTS

• Surfactants with a non-ionic character are the most suitable for this application, because they don’t ionise in water solution and therefore are more stable in front of hardness.

• Solvents have to be included to solve the remaining dirt.

COMPONENTS

ALFANOX 46 (sodium α -olefin sulphonate, ≈ 37% a.m.): anionic character. Primary surfactant. It increases foam volume and improves dispersion of the dirt.

ICTEOL K-50 (potassium oleate, ≈ 50% a.m.): anionic character. Detergent soap and foam controller.

LEVENOL C-201 (glycereth-17 cocoate, ≈ 100% a.m.): non-ionic character. Mild surfactant which decreases the irritationlevel of anionic surfactants, increasing performance and dispersion of the dirt. Foaming controlled surfactant. Eco-toxicologically friendly. It doesn’t need any risk sentences or warnings on its label.

Butyldiglycol (glycol): hydrotrope product. It is specially recommended to maintain the liquid form of the products. It also acts as dirt emulsifier, mainly in a direct application.

Sodium Citrate : chelating effect.

The information and recommendations in this publication are to the best of our knowledge reliable. However, nothing herein is to be construedas a warranty or representation. Users should make their own tests to determine the applicability of such information or the suitability of anyproducts for their own particular purpose.Statements concerning the use of the products described herein are not to be construed as recommending the infringement of any patent andno liability for infringement arising out of any such use is assumed.

GUIDELINE FORMULARY

Kao Corporation, S.A.Member of Kao Chemicals EuropePuig dels Tudons, 10 -E-08210 – Barberà del VallèsTel. : +34-93-7399300Fax : +34-93-7399377 a

P

DESCRIPTION

c

c

• Appli ation on hard surfaces

• Very effective in removing greasy dirt

• Espe ially suitable for kitchens

• Can be applied directly and no need to rinse

• Effect of dissolved oxygen

3

(1) FMC Foret(2) CELEASAL XS100(3) DEQUEST 2066

COMPOSITION %

QUARTAMIN TH-V 3.5FINDET 10/18 0.1AOCOLOR 50% (H O ) (1) 6.0Citric Acid (100%) e.q. (pH adjust = 2.0)Sodium Xylene Sulfonate (2) e.q. (viscosity adjust: ≈ 0.6% )Fragrance e.q.Phosphonate type ( ) 0.3Deionized Water Up to 100%

0

TECHNICAL CHARACTERISTICSKao Method


BROOKFIELD VISCOSITY (2 ºC, cPs) : 200 - 300 KCSA-227

pH (as it is) : ≈ 2.0 KCSA-014

H2O2 ACTIVE (%) : ≈ 3 % KCSA-040

STABILITY : Correct (1 month at 40ºC/RT/5ºC)

1

KCE REFERENCE: D-122

e-mail : [email protected] : www.k ochemicals-eu.com

NALL PUR OSE CLEANER - “OXI - ACTIO ”Bath & Kitchen



KCE REFERENCE: D-122

2REFERENCE : UP-DATED: PRINTED :

2005-03-042010-09-09



• Add QUARTAMIN TH-V and FINDET 10/18 to the deionized water and stir till complete transparency.

• Continue with the addition of DEQUEST 2066.

• Adjust pH to around 3, using citric acid for that purpose.

• Add the AOCOLOR 50%.

• Continue with the addition of the fragrance and stir until compete transparency.

• Adjust viscosity using Sodium Xylene Sulfonate.

• Check the pH again, and if necessary, adjust to the indicated value (pH ≈ 2) with citric acid (use NaOH in the unlikely case it is necessary to increase the pH value).

COMMENTS• Aspect: products on the market are transparent liquids, colourless or slightly coloured (pink,

blue…).

• The addition of the phosphonate derivatives is recommended to improve the H2O2 stability in thefinal formula. The percentage will depend on the type of phosphonate as well as on its content onactive matter.

• In order to avoid stability and decomposition problems, the fragrances must be H2O2 stable.

• Sodium Xylene Sulfonate is used for viscosity adjustment.

• The pH adjustment just before the addition of AOCLOR 50% to a higher value than that of thefinal formula, is because this product is an acidic product that will lower the pH value of themixture when added.

COMPONENTS

FINDE 10/18 (deceth-6, ≈ 100% a.m.): non-ionic character. Detergent, degreaser and emulsifier. Very good wettingTagent.QUARTAMI TH-V (ceteartrimmonium chloride , ≈ 50% a.m.): cationic character. Conditioning and anti-static surfactant. ItNis recommended for transparent fabric softeners. In combination with hydrogen peroxide (H2O2), it can be used in laundry products as disinfecting and bleaching agent and also in hard surface cleaners.


GUIDELINE FORMULARY


1


ALL PURPOSE CLEANER

DESCRIPTION

• Hard surfaces application• It can be directly applied to the surface• It can be also used as floor cleaner, diluted at 5g/L approx. in water• No rinse is necessary

COMPOSITION %

EMAL 30E 2.7FINDET LR4/2585 3.5AMIDET A/18 3.0ICTEOL K-50 2.0Sodium Citrate. 2H2O 1.0Fragrance, Preservative, Dyes e.q.Deionized Water Up to 100%


APPEARANCE (20ºC) : Transparent liquid KCSA-258

COLOUR : Usually green or yellow KCSA-258

ODOUR : Usually pine or citric KCSA-267

pH (as it is) : Around 8.5 KCSA-014

DRY MATTER (%) : 9 approx. KCSA-092





2PREVIOUS : AP10, D917-DL5 UP-DATED : 2002-06-20PRINTED : 2004-06-28



• Add sodium citrate to the water and stir till complete solubility. Continue with the addition of the other components starting with EMAL30E. After each addition stir till complete transparency.

• Continue with the addition of perfume, preservative and dyes.

COMMENTS

• Alkaline pH in strong hard surfaces cleaners is needed to ensure complete fatty dirt and soil saponification .Surfactants have to be stable at this high pH.

• The surfactants with a non-ionic character are the most suitable for this application, because they don’t ionise in water solution and therefore are more stable in front of water hardness.

• In some cases, the addition of solvents helps to eliminate the remaining dirt.

COMPONENTS

AMIDET A/18 (PEG-6 cocamide MEA, ≈ 100% a.m.): non-ionic character. Detergent, degreasing and emulsifying agent.

EMAL 30E (sodium lauryl sulfate, ≈ 30% a.m.): anionic character. Primary surfactant, highly foaming and detergent.

FINDET LR4/2585 (ethoxylated branched C1415 fatty alcohol, ≈ 85% a.m. ): non-ionic character. Very good degreasing agent. Especially recommended for hard surfaces application. Cloud point at 1% in water around 65ºC.

ICTEOL K-50 (potassium oleate, ≈ 50% a.m.): anionic character. Detergent soap and foam controller.


GUIDELINE FORMULARY


1PREVIOUS: NPUP-DATED: 2003-06-26PRINTED : 2013-01-28


ALL PURPOSES – LOW FOAM

FLOORS

DESCRIPTION

• Air-refreshing detergent

• Detergent with low foaming power

• Hard surfaces cleaner

• No rinse is necessary

COMPOSITION %

AKYPO LF-4 5.0Fragrance 1.5Isopropyl Alcohol 3.0Preservative e.q.Dye(s) e.q.De-ionized Water Up to 100%



COLOUR : Usually green or yellow KCSA-258

OLOR : Usually pine or citric KCSA-267




1

GUIDELINE FORMULARY

Kao Corporation, S.A.Member of Kao Chemicals EuropePuig delsTudons, 10 -E-08210 – Barberà delVallès


Tel. : +34-93-7399300Fax : +34-93-7399377

e-mail : [email protected] : www.kaochemicals-eu.com

DEGREASERFor Household and Professional applications

DESCRIPTION

• Advanced formulation for the most stubborn grease• Very effective to remove dirt from machinery and industrial kitchens• Mild and safe formulation

COMPOSITION %

AKYPO LF2 1.1FINDET 10/18 2.5Trisodium Citrate 1.0Monoethanolamine (MEA) 1.0Dipropyleneglycol n-butylether (DPnB) 5.0Sodium Hydroxyde (50%) q.s. (adjust pH = 11.5)Perfume q.s.Preservative q.s.Deionised Water Up to 100%


APPEARANCE (20°C): Transparent liquid KCSA-258

VISCOSITY BROOKFIELD (20°C, cPs): Liquid KCSA-227

pH (as it is): 11.5 KCSA-014

DRY MATTER (%): 11 approx. KCSA-092

STABILITY TEST: Correct 1 month 40ºC/RT/5ºC





PREVIOUS: D09023-46 UP-DATED: 2010-06-01PRINTED : 2010-06-01

2


• Charge water and dissolve sodium citrate.

• Add MEA, PnB, FINDET10/18 and AKYPO® LF2 while stirring.

• Adjust pH with Sodium Hydroxide to 11.5.

• Continue with the addition of the other additives: preservatives, fragrance, dye (diluted in water), following the supplier’s recommendations.

COMPONENTS

AKYPO LF2 (caprileth-9 carboxylic acid, ≈ 90 % a.m.): anionic character. Low foaming surfactant stable at high alkaline or acidic conditions. It shows also good stability in the presence of high electrolytes content. Hydrotropic properties.

FINDET 10/18 (deceth-6, ≈ 100% a.m.): non-ionic character. Detergent, degreaser and emulsifier. Very good wetting agent.


GUIDELINE FORMULARY

Kao Corporation, S.A.Member of Kao Chemicals EuropePuigdels Tudons, 10 -E-08210 - Barberà delVallèsTel. : +34-93-7399300 e-mail : [email protected] : +34-93-7399377 Web : www.kaochemicals-eu.com

1


DISINFECTING FLOOR CLEANER

WITH PINE OIL

DESCRIPTION

• Hard surfaces and floor cleaner

• Detergent with high disinfecting effect

• Usual application on floors: diluted at 0.5 – 2 % in water

• No rinse is necessary

COMPOSITION %

LEVENOL C-201 7.0TETRANYL BC-80 1.0Isopropyl Alcohol 10.0Butyldiglycol 3.0Pine oil 0.5Fragrance e.q.Preservative e.q.Dye(s) e.q.Deionized Water Up to 100%NaOH 10% e.q. (pH adjust)

TECHNICAL SPECIFICATIONSKao Method


pH (100%) : 7.0 – 8.0 KCSA-014

VISCOSITY (cPs, 20ºC) : Liquid Product KCSA-227

COLOUR: Usually Green KCSA-258

STABILITY: Correct 1month at 40ºC/RT/5ºC




KCE REFERENTE : D-103

2PREVIOUS: SC04UP-DATED: 2005-03-16PRINTED: 2004-03-16


• Process at RT.

• Add to the deionised water all the components in the written order, and stir till complete solubilization after each addition.

• Adjust pH with diluted NaOH.

• Unload the final product.

COMMENTS

• 0.15% of Formaldehyde (38%) can be used as preservative.

• It is also advisable to solubilize the pine oil in the LEVENOLC-201 before to add it into the water.

COMPONENTS

LEVENOL C-201 (Glycereth-17Cocoate, 100% a.m.): non-ionic character. Mild surfactant, it decreases the irritation levelof anionic surfactants, increasing performance and dispersion of the dirt. Foaming controlled surfactant. Eco-toxicologicallyfriendly.

TETRANYL BC-80 (Benzalkonium Chloride, 80% a.m..): cationic character. Disinfecting effect: bactericide and fungicide.

Butyldiglycol (glycol): hydrotrope product. It is specially recommended to maintain the liquid form of the products. It also acts as dirt emulsifier, mainly in a direct application.

Isopropyl Alcohol (Isopropanol or IPA): water soluble solvent. It acts as a dirt emulsifier, mainly in a direct application.

Sodium Hydroxyde (NaOH) : disinfecting agent. Saponification of mineral and animal oils.


GUIDELINE FORMULARY

Kao Corporation, S.A.Member of Kao Chemicals EuropePuigdels Tudons, 10 -E-08210 - Barberà del VallèsTel. : +34-93-7399300 e-mail : [email protected] : +34-93-7399377 Web : www.kaochemicals-eu.com

1

FLOOR CLEANER - Neutral pH with bioalcohol

DESCRIPTION

• Quick dry effect

• Low foaming floor cleaner

• Neutral pH

COMPOSITION %

Isopropanol (100%) 8.0Ethanol (96%) 3.0LEVENOL F-200 3.0EMAL 227E 1.0NaOH 10% e.q. (adjust pH)Preservative, Perfume, Dye (s) e.q.Deionized water Up to 100%


• Add the isopropanol and the ethanol on water

• Add EMAL 227E and LEVENOL F-200.

• Adjust pH with NaOH to 7-8.

• Add the other ingredients (preservative, perfume and dye).

COMPONENTES

LEVENO F-200 (Glycereth-6 Cocoate, ≈ 100% a.m.): non-ionic character. Mild surfactant that decreases the irritationLlevel of anionic surfactants, increasing performance and dispersion of the dirt. Medium foaming and thickening surfactant. Eco-toxicologically friendly. It doesn’t need any risk sentences or warnings on its label.

EMAL 227E (Sodium Laureth Sulfate, ≈ 27% a.m.): anionic character. Primary surfactant, highly foaming and detergent.




GUIDELINE FORMULARY


1


FLOOR CLEANERWITH AMMONIAC

DESCRIPTION

• Hard surfaces and floor cleaner application• Detergent with disinfecting effect• It contains ammoniac• Usual application on floors: diluted at 0.5 –2 % in water• No rinse is necessary

COMPOSITION %

FINDET 10/18 5.0Ammoniac 25% 0.5Isopropyl Alcohol 5.0Fragrance e.q.Preservative e.q.Dye(s) e.q.Deionized Water Up to 100%NaOH 10% e.q. pH adjust



pH (as it is) : 10 approx. KCSA-014

VISCOSITY (cPs, 20ºC) : Liquid product KCSA-227

COLOUR : Usually green KCSA-258

STABILITY : Correct 1month at 40ºC/RT/5ºC





2REFERENCE : D-020 (PREVIOUS : FS03-D70A /MA-3A, MA-3B, MA-3C, REF.3392-D) REVISION DATE: 2002-09-22PRINTING DATE: 2014-05-23


• Process at RT.

• Add to the water all the components in the written order, and stir till complete solubilization after each addition.

• Adjust pH with diluted NaOH.

• Unload the final product.

COMMENTS

• 0.15% of Formaldehyde (38%) can be used as preservative.

• The quantity of ammoniac can be increased till 2% without problems.

• If higher disinfecting effect is desired 2% of TETRANYLBC-50 can be added.

COMPONENTS

FINDET 10/18 (deceth-6, ≈ 100% a.m.): non-ionic character. Detergent, degreaser and emulsifier. Very good wetting agent.

TETRANYL BC-50 (benzalkonium chloride, ≈ 50% a.m..): cationic character. Disinfecting effect

Isopropyl Alcohol (isopropanol or IPA): water soluble solvent. It acts as a dirt emulsifier, mainly in a direct application.

The information and recommendations in this publication are to the best of our knowledge reliable. However, nothingherein is to be construed as a warranty or representation. Users should make their own tests to determine the applicabilityof such information or the suitability of any products for their own particular purpose.Statements concerning the use of the products described herein are not to be construed as recommending theinfringement of any patent and no liability for infringement arising out of any such use is assumed.

ALL PURPOSE CLEANER FORMULATIONS BY KAO

Documents