All About the NuCanoe
Jan 20, 2016
All About the NuCanoe
The NuCanoe is a boat that gives people a greater ability to pursue activities on the
water.
What is NuCanoe?
Enhance Your AbilityTo Fish To Recreate
To Hunt
To Dive To RowTo Paddle
What is NuCanoe?
NuCanoe Models• NuCanoe 10’
• NuCanoe 12’
Standard Configuration
2 Molded Bench Seats
4 Carry HandlesBow Plug
Deck Rings (10’-15 / 12’-17)
NuCanoe Color Options
Red Yellow Desert Sand
OD Green
Hunter Brown
Green Camo
Brown Camo
Design FeaturesSealed Hull design provides high internal floatation and allows the NuCanoe to float even if capsized or full of water. The only access to the interior of the NuCanoe is at the bow and is sealed by a bow plug.
Kiss-offs on the deck floor join the deck to the hull to provide strength and rigidity.
Square Transom houses a trolling motor. Up to
2HP or equivalent motor.
¼-20 Threaded Inserts are molded into the hull. Seats, hardware, and accessories are secured via screws into these inserts. They are completely enclosed and sealed in hull.
Design Features
Upright & Modular Seats provide upright and dry seating, and enable single, tandem, or triple use.
Stern Hole strengths transom for use with a motor, provides a pass
through for anchor rope, and enables the NuCanoe to be secured.
Battery Box Storage fits a type-24 Battery Box and provides strap-down
points
Design Features
Mild Rocker enables responsive handling and improves maneuverability.
Design Features
Dual Channels run the length of the hull to enhance the tracking and
handling of the NuCanoe.
Hard Chine on both sides of the NuCanoe provides significant
secondary stability.
Triangular Skeg at the stern end of the hull protrudes into undisturbed water to greatly improve tracking and lateral stability in the water.
Wide V-shaped Hull decreases the beam of the NuCanoe at the water line to around 32-36” to decrease drag and increase hull
speed and maneuverability.
Seating Options – 12’
Solo Tandem Tandem Center Facing
Tandem XL Triple Triple Center Facing
Seating Options – 10’
Solo Tandem Tandem Center Facing
Accessories & Rigging• Accessories
– Install or remove in minutes– Can be positioned in multiple locations– Fit both NuCanoe models
• Rigging Kits– Install via pop rivets– Hardware is permanent and can not be removed
Specs &Technical Info
NuCanoe 10 NuCanoe 12
10' Length 12'
42" Beam (Width) 42"
32-36" Beam @ Waterline 32-36"
13-16" Height 12-16"
4-6" Draft 4-6"
59 lbs Hull Weight 77 lbs
1-2 ppl Seating Capacity 1-3 ppl
450 lbs Weight Capacity 525 lbs
Specs & Technical Data• Manufacturing Process
– The NuCanoe is a rotationally molded product.
• Material – The NuCanoe hull material is a high-density polyethylene
compound designed for applications like kayaks or boats that require a balance very high stiffness and extreme toughness. Key features of this material are:
• Excellent long term outdoor weatherability (UV8);• Superior balance of toughness and rigidity;• Very High Stiffness;• Excellent low temperature impact.
Warranty• The NuCanoe is covered by a 3 year warranty against
defects from workmanship and materials. • In the event of defect, malfunction, or other failure of the
product not caused by any misuse, modification, or damage to the product while in possession of the original purchaser, we will remedy the failure or defect, without charge to the consumer, within a reasonable period of time.
• The remedy will consist of repair or replacement of the product, at NuCanoe, Inc.’s option.
www.nucanoe.com