This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
PART NUMBER MAIN BREAKER PHASE VOLTAGEBCH-400-1-240 400A 1 120/240V
BCH-600-1-240 600A 1 120/240V
BCH-800-1-240 800A 1 120/240V
BCH-400-3-208 400A 3 120/208V
BCH-600-3-208 600A 3 120/208V
BCH-800-3-208 800A 3 120/208V
BCH-400-3-600 400A 3 347/600V
BCH-600-3-600 600A 3 347/600V
BCH-800-3-600 800A 3 347/600V
BCH-1000-3-600* 1000A 3 347/600V
BCH-1200-3-600* 1200A 3 347/600V
BCH-1600-3-600* 1600A 3 347/600V
19912-17991
BC HYDRO METERING KIOSKBCHMetering kiosk built to BC Hydro distribution standards. Used for applications where secondary services are installed in weatherproof kiosks outside of a main facility.
Features/Specification:
• Marine grade aluminum construction• CSA Type 3R rated• Padmount design• Double roof design for solar shielding• Padlockable stainless steel 3-point handle• Hinged doors with pour in place gasket• Hidden hinges for additional security• Gas shock door stays• Removable lifting ears• Viewing window on door (Models up to 800A)• PC101(ANSI61)Greypowdercoatfinish• Service entrance rated main breaker• Utility approved CT enclosure• Compliant with BCH metering standards• Complete factory wiring for line & load lugs• *Models above 800A have external meter bases and bussed CT section
• Galvanized steel or aluminum construction• CSA Type 1 rated• Designed to BC Hydro distribution standards• Screw on cover• Sealing screws• Backpan• Internal mounting holes
CT cabinets are used to meter single phase and three phase services where the CT’s are not included within the meter base. These boxes are manufactured with either galvanized steel or aluminum and come with seal-ing screws, backpan for mounting CT’s and internal mounting holes.
H
W
FRONT VIEW(COVER REMOVED)
D
SIDE VIEW
PART NUMBER HEIGHT WIDTH DEPTH MATERIAL SINGLE PHASE
SERVICE
THREE PHASE
SERVICE
CTCG30-16-8 30” 16” 8” GALVANIZED STEEL UP TO 400A UP TO 400A & BELOW 300V
CTCA30-16-8 30” 16” 8” ALUMINUM UP TO 400A UP TO 400A & BELOW 300V
CTCG42-18-16 42” 18” 16” GALVANIZED STEEL OVER 400A OVER 400A TO 800A
CTCA42-18-16 42” 18” 16” ALUMINUM OVER 400A OVER 400A TO 800A
CTCG42-36-24 42” 36” 24” GALVANIZED STEEL NOT USED OVER 800A
CTCA42-36-24 42” 36” 24” ALUMINUM NOT USED OVER 800A
• Galvanized steel construction• CSA Type 3R rated• Service entrance rated• Direct burial design• 4-Jaw meter socket• Line lugs rated for (1) 4AWG-600MCM or
(2) 1/0 AWG-250MCM (400A only)• Ground lug• 28” ground stakes• Complies to Fortis BC distribution standards• PC101 Grey powder coat inish
• Steel construction• CSA Type 3R rated• Back to back design• Padlockable 3-point handle• Service entrance rated main breaker with lock off• Ground bar• Utility approved CT Enclosure• CT section pre-drilled and tapped• Fully bussed assembly• Louvers with bug screen• Padmount design• Removable lifting ears• PC101 Grey powder coat finish
Optional Features
• Meter base• Distribution panel• Custom powder coat colours
The SMC Metered Service Centre provides a compact footprint with a free-standing back to back design approved for use by Sask Power. The consumer section provides ample room for connecting loads to the busbars. The fully bussed unit enables ease of installation for both the utility and customer.
• Steel construction• Louvers and door stay• CSA Type 3R rated• Tin plated aluminum bus bars with spacing for CT’s• 600V rated• Padlockable stainless steel 3-point handle• Powder coated PC101 Grey• Neutral and ground bars with bonding strap• Per figure 2-5 and 2.6 of Sask Power Electrical Metering
Requirements
For dedicated service up to 600A Sask Power is allowing a combination service termination/CT enclosure. This family of enclosures exceeds the requirements as set out in the November 2017 Electrical Service Requirements