Alfa R36 plus Alfa Adapter Setup Guide Connect to Existing Wifi hot spots using Alfa R36 + Alfa USB Wifi Adapters and create your own Wifi Extender Network. Read entire Guide before begin with setup Connect Rj45 (Network) cable in Computer and other end in R36’s LAN port Install Devices as shown below and then connect 110V AC or 12volt DC Adapter to the power source.
11
Embed
Alfa R36 plus Alfa Adapter Setup Guide - pcXpert.orgpcxpert.org/alfa/setup-guides-pdf/R36 plus AlfaUSBAdapter...Alfa R36 plus Alfa Adapter Setup Guide Connect to Existing Wifi hot
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Alfa R36 plus Alfa Adapter Setup Guide
Connect to Existing Wifi hot spots using Alfa R36 + Alfa USB Wifi Adapters and
create your own Wifi Extender Network.
Read entire Guide before begin with setup
Connect Rj45 (Network) cable in Computer and other end in R36’s LAN port
Install Devices as shown below and then connect 110V AC or 12volt DC Adapter to the
power source.
Open a web page using Internet Explorer, Google Chrome or Firefox and type:
http://192.168.2.1 (or 192.168.2.1) in address bar & press "Enter"
If you cannot reach the setup page, restart the Computer, if you use a Laptop, you may need
to disable Wifi Radio temporarliy.
The configuration window opens, enter admin in both boxes, click OK
Click on "Change Profile" and follow the instructions in pictures.
Click on « Site Survey »
Select The Wi-Fi Network you want to connect to
Important: Do Not select “ALFA_AP”, this is the SSID of your R36 Device!
[Note: If you cannot see any available SSID in site Survey, click on “Rescan” if still
nothing, you may have to verify R36 Firmware, some USB Adapters need other
firmware. Scroll down to: How to Verify and Upgrade Firmware]
Enter the Password (Security Key) in the "pass phrase" box and click "Next"
If you connect to an unprotected network, simply click on Next.
After click Next check box the screen will show Saving…
Click “Done” for using Default SSID “ALFA_AP” or Configure the SSID and Security Mode of the
R36 Router. (EX. ALFA-Extend)
Saving configuration
Rebooting after Saving
Wizard Success!
If you see “Connected” after restart (image below) All done, you’re Online!
you can close setup window.
If you do NOT see “Connected” begin from start!
NOTE: The R36’s default WiFi Network Name (SSID) is “ALFA_AP” and is open
for access to anyone (not password protected)
Any Wireless Device can now connect to ALFA_AP Network and surf on internet.