Direct-To-Garment (DTG) General Information/Technical Data Sheet AlbaChem®ALBA- PRE DTG Pretreatment Spray General Description: Alba-PRE is a universal dtg pretreatment spray for cotton materials. It may be used on all colors with the greatest benefit on dark (black) materials. It is specifically designed to minimize staining and blocking. It will increase color brilliance and provide a soft feel to the image. Washer/Dryer safe. Alba-PRE is meant for use on *Epson® style printers and inks. Benefits: Directions for Use: Shake well. Holding can approximately 6" from fabric, spray Alba-PRE in a slow steady motion horizontally covering print area. On dark colors repeat in a vertical pattern. Cure on heat press @ 330-360°F for 30 seconds. Do not clamp down too tight. 36-41 36th Street Long Island City, NY 111065439 San Fernando Road West, Los Angeles, CA 90039 Tel: (718) 392-6272 www.albachem.com [email protected] • Smooth Even Coverage • Non-Staining • Soft Feel • Great for small print areas: sleeves, left chest, neck tag etc. Packaging: • Item No. Package Size 1670 Net Wt. 15.75oz. Case Pack Case Weight 12 cans 16 lbs. *The shipping designation of Limited Quantity is only valid for shipments by ground with NAFTA (United States, Canada and Mexico). Air shipments to any location (domestic or international) and ALL shipments outside of NAFTA require non-flammable gas labeling. The proper shipping name is: Aerosols, Non-Flammable Gas 2.2, UN 1950. Technical Data: Physical Properties: Appearance: Clear colorless liquid in aerosol can Solubility in Water: Complete Odor: Mild to Odorless Chemical Family: Saline Solution with Nitrogen Propellant Hazmat Information* Limited Quantity Exemption Environmental: Volatile Organic Compound (VOC): No 0% Hazardous Air Pollutant (HAP): No Ozone Depleting Substance: No SARA 313 Chemicals: None Contains No Alkylphenol Ethoxilates Tip: To prevent crystallization, try hovering the heat press over the fabric for 20 seconds before pressing. *EPSON is a registered trademark of Seiko Epson Corporation/Epson America Inc.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Direct-To-Garment (DTG)General Information/Technical Data Sheet
AlbaChem® ALBA-PREDTG Pretreatment SprayGeneral Description:Alba-PRE is a universal dtg pretreatment spray for cotton materials. It may be used on all colors with the greatest benefit on dark (black) materials. It is specifically designed to minimize staining and blocking. It will increase color brilliance and provide a soft feel to the image. Washer/Dryer safe. Alba-PRE is meant for use on *Epson® style printers and inks.
Benefits:
Directions for Use:Shake well. Holding can approximately 6" from fabric, spray Alba-PRE in a slow steady motion horizontally covering print area. On dark colors repeat in a vertical pattern. Cure on heat press @ 330-360°F for 30 seconds. Do not clampdown too tight.
36-41 36th Street Long Island City, NY 111065439 SanFernando Road West, Los Angeles, CA 90039Tel: (718) 392-6272 www.albachem.com [email protected]
• Smooth Even Coverage• Non-Staining• Soft Feel• Great for small print areas: sleeves, left chest, neck tag etc.
Packaging: • Item No. Package Size
1670 Net Wt. 15.75oz.Case Pack Case Weight
12 cans 16 lbs.
*The shipping designation of Limited Quantity is only valid for shipments by ground with NAFTA (United States, Canada and Mexico). Air shipments to any location (domestic or international) and ALL shipments outside of NAFTA require non-flammable gas labeling. The proper shipping name is: Aerosols, Non-Flammable Gas 2.2, UN 1950.
Technical Data:Physical Properties:Appearance: Clear colorless liquid in aerosol can Solubility in Water: CompleteOdor: Mild to Odorless Chemical Family: Saline Solution with Nitrogen Propellant
Hazmat Information*Limited Quantity Exemption
Environmental:Volatile Organic Compound (VOC): No 0%Hazardous Air Pollutant (HAP): No Ozone Depleting Substance: No SARA 313 Chemicals: None Contains No Alkylphenol Ethoxilates
Tip: To prevent crystallization, try hovering the heat press over the fabric for 20 seconds before pressing.
*EPSON is a registered trademark of Seiko Epson Corporation/Epson America Inc.
Related Documents
