General Equipment CHAMBER FURNACES Standard features: ✓ 1100°C maximum operating temperature ✓ 6, 14 or 23 litre chamber volumes ✓ Tilt forward, drop down door with air gap to minimize external temperature ✓ Carbolite 301 controller, with single ramp to set-point facility ✓ Delayed start & process timer function as standard EL GENERAL PURPOSE CHAMBER FURNACES Standard features: ✓ 1100°C, 1200°C or 1300°C maximum operating tempera ture ✓ 5, 13 or 23 litre chamber volumes ✓ Up & away door keeps heated surface away from the user ✓ Carbolite 301 controller with single ramp to set-point facility ✓ Delayed start & process timer function ✓ Hard wearing alumina element carriers, furnace entrance & hearth ✓ Energy efficient low thermal mass insulation ✓ Free radiating wire wound elements CWF HIGH TEMPERATURE SINGLE ZONE TUBE Standard Features: ✓ 1500°C & 1600°C maximum operating temperatures ✓ Using worktubes of 60 or 90mm outer diameter ✓ Accepts worktubes with 180, 450 or 610mm heated tube length ✓ Silicon carbide heating elements ✓ Horizontal configuration ✓ Carbolite 301 controller, with single ST
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
General Equipment
CHAMBER FURNACES
Standard features: ✓ 1100°C maximum operating temperature✓ 6, 14 or 23 litre chamber volumes✓ Tilt forward, drop down door with air gap to minimize
external temperature✓ Carbolite 301 controller, with single ramp to set-point facility✓ Delayed start & process timer function as standard✓ Vacuum formed, low thermal mass insulation✓ Hard ceramic hearth fitted as standard✓ Ventilated via top mounted ceramic chimney
ELF
GENERAL PURPOSE CHAMBER FURNACES
Standard features: ✓ 1100°C, 1200°C or 1300°C maximum operating tempera
ture✓ 5, 13 or 23 litre chamber volumes✓ Up & away door keeps heated surface away from the user✓ Carbolite 301 controller with single ramp to set-point
facility✓ Delayed start & process timer function✓ Hard wearing alumina element carriers, furnace entrance &
hearth✓ Energy efficient low thermal mass insulation✓ Free radiating wire wound elements pitched for optimum
uniformity✓ Easy access to elements & controls simplifies maintenance
& servicing
CWF
HIGH TEMPERATURE SINGLE ZONE TUBE FURNACE
Standard Features: ✓ 1500°C & 1600°C maximum operating temperatures✓ Using worktubes of 60 or 90mm outer diameter✓ Accepts worktubes with 180, 450 or 610mm heated tube
length✓ Silicon carbide heating elements✓ Horizontal configuration✓ Carbolite 301 controller, with single ramp to set-point
facility✓ Delayed start / process timer function as standard
STF
General Equipment
Freeze Dryer ALPHA 1-2 LDplus
What is freeze drying (Lyophilisation)?Freeze drying means: Extraction of water from frozen material.The drying process takes place by avoiding the liquid state through sublimation, i. e. direct conversion from ice to vapor. This happens under vacuum and the temperature in the product is normally less than -10°C
The freeze dryer ALPHA 1-2 LDplus is suitable for drying of e. g. bacteria and virus cultures, blood plasma, serum fractions, antibodies, sera, vaccines and pharmaceutical products such as chloramphenicol, streptomycin, vitamins, ferments as well as plant extracts for biochemical tests.
Specification:Ice condenser : capacity max. 2.5 kg
Physical data (without vacuum pump)Dimensions of the unit : width: 315 mm(ind. Vacuum flange connection) : height: 345 mm, dept: 460 mmWeight : approx. 28 kgNoise emissions : according to DIN 45635:49 dB(A)Electrical connection : 230 v / 50Hz (others upon request)Power consumption : 1,2 kVAMax. current : 5AFuse protection : 6,3 AAmbient temperature : Climate category: SN +10oC to +25oC,
ROTATIONAL VACUUM CONCENTRATOR FOR LABORATORYRVC SERIES
The Christ RVC-series is well structured in size and combination with different cooling traps and vacuum pumps. This gives the customer a maximum benefit for every application.
Examples for multiple applications:
Efficient concentration of DNA/RNA-samples, proteins etc. BioTech and Genetic Engineering Sample preparation in HPLC, GC, MS, Electrophoresis ... Isolation and synthesis of natural compounds Storage and handling of drugs (chemical libraries) Combinatorial Chemistry High-Throughput-Screening (HTS)
Rotational-Vacuum-Concentrator RVC 2-25 CD
the mid-size concentrator: all-purpose table-top cencentrator for the routine concentration of larger sample volumes
rotor capacity 108 x 1,5/2,2 ml tubes up to 2 x microtiter-plates standard acrylic glass cover, optional stainless steel/glass compound cover with window
(corrosion proof, e. g. for DCM/ACN) chemical resistant diaphragm pumps (2 m3/h suction capacity, 9 mbar final vacuum), standard,
vacuum systems with lower vacuum and vacuum controls, optional optional combination with cooling traps (2 or 4 litres) for increased evaporation
RVC 2-25 CD
General Equipment
Ultrasonic Cleaners Baths
Elmasonic P The most professional way to use ultrasound Digital displays, self-explanatory operation, clear indication of all
parameters, set and actual values at a glance. Two different ultrasonic frequencies in one unit (frequency can be
changed during operation): 37 kHz - for coarse contaminations, for dissolving, blending, dispersing and degassing 80 kHz – noise-reduced operation, ideal for quiet work
areas, prolonged ultrasonic cleaning cycle, perfect for the cleaning of hollow spaces, e.g. capillaries
7 special ultrasonic features (Normal, Pulse, Sweep, Degas, Power control, Pause, Auto Start)
Elmasonic S Series Offers... Sweep function for an optimized sound field distribution in the
cleaning liquid by frequency modulation Degas function for the efficient degassing of the cleaning liquid
and for laboratory purposes Electronic timer from 1 to 30 minutes Plastic carrying handles
Ultra light pipette with highest precision and accuracy, low operating force, ultimate ergonomics and flexibility, 4 digits volume display with magnifying shape, fully autoclavable, resistance to chemical, thermal and mechanical stress.
EPPENDORF ep T.I.P.S
Choose from a wide range of ep T.I.P.S. :Purity level (Eppendorf quality, Eppendorf PCR clean, Eppendorf biopur), filter (standard or dual filter), and packaging (box, reloads, set, singles, or rack).
MULTIPETTE PLUS, STREAM & XSTREAM
Positive displacement dispenser: Ideal for dispensing volume in long series, contamination-free (eliminates aerosol formation) application eg. PCR application, toxic, infectious or radioactive liquids, aggressive liquids (e.g. concentrated acids), also ideal for problematic liquids such as viscous, high vapor pressure and high/low density liquid.
VARISPENSER, VARISPENSER PLUS, TOP BURET, EASYPET
MICROLITER 600, 700, 800 and 900 Series2.5 µL to 500 µLThis type of syringe*, for use with liquids, incorporates a stainless steel plunger that is individually fitted to its matching syringe barrel. The plunger is not interchangeable or replaceable. 600 Series• 2.5 µL and 5 µL• Reinforced plungers prevent plunger bending• Rugged, durable and long lasting 700 Series• 5 µL to 500 µL• Economical; great for chromatography• Also available: ground glass tip (luer tip, LT) termination 800 Series• 5 µL to 250 µL• Reinforced plungers• Plunger stop prevents plunger blow-out 900 Series• 5 µL and 10 µL• Reinforced plungers• Perfect for students: rugged and durable MODIFIED MICROLITER 7000 Series0.5 µL to 5 µL• Positive displacement syringe has a tungsten plunger wire that travels inside the needle• The needle essentially acts as the glass syringe barrel; no dead volume
General Equipment
Syringe size
600 series 700 series 800 series 900 series 7000 series 1000 series 1700 series 1800 series
0.5-5 μl
2.5-5 μl
5-10 μl
5-250 μl
10-250 μl
10-500μl
1-100 ml
Purge & Trap Syringes 5 mL and 25 mL These syringes are designed for the analysis of drinking water Samples according to EPA purge and trap concentration techniques.
Carbon Analyzer Syringes 50 µL to 250 µL For water analysis with Total Organic Carbon (TOC) analyzers. Wetted parts are stainless steel and borosilicate glass. Syringes have a metal luer tapered hub cemented over a MICROLITER 700 Series N syringe. The luer hub fits precisely into the inlet of a total carbon analyzer.
PB600 Repeating Dispensers 10 µL to 10 mL Consistently dispense sample up to 50 times with the push of a button.The repeating dispenser works with MICROLITER or GASTIGHT syringes from 10 µL to 10 mL.
SampleLock™ Syringes 50 µL to 100 mL Lock your sample in the SampleLock syringe with the easy-to-use twist valve. An internal standard can be injected through the valve port into samples contained in the SampleLock syringe. Also, pre-pressurize gaseous samples prior to GC injection. The positive rear plunger stop prevents loss of sample and plunger blowout at elevated pressures.
Digital Syringe™ .5 µL to 500 µL • The only N.I.S.T. traceable, calibrated syringe device available• Comes completely calibrated with its own “Certificate of Calibra
tion”• Easy-to-read LCD screen displays volume dispensed within ±0.5 % of the syringe volume• Used with Hamilton syringes with total volumes of 0.5 to 500 µL
Super Syringes 5 L to 2 L For air sampling, preparing gas standards; or calibrating reservoirs,pneumographs, and spirometers. Used in industries such as: mining,chemical production, grinding and mineral processing. Syringe barrel is made of a clear acrylic material.
OTHER SYRINGES AVAILABLEPlease call us to request any of the following syringe:• LIFE SCIENCE SYRINGES, • CHROMATOGRAPHY SYRINGES, • INSTRUMENT SYRINGES
HAMILTON SPECIAL SYRINGE
General Equipment
General Equipment
COOLING CIRCULATORS Refrigerated Heating Bath with air-cooled refrigerating unit. Consisting of isolated cooling bath made of stainless steel with immersion thermostat. Pump and wetted parts made from stainless steel or high-resistant plastics.
MPC-Controller:Modern and easy to use microprocessor controller with a large temperature display. Limited to essential functions only: * Large temperature display
* LED indicators for pump, cooling and heating
* Simple operation using only 3 keys
CC-Pilot: controller with new innovative E-grade technology for extended functionality without swapping the controller. An activation code is entered via the control panel and the proven Plug & Play technology for professional service. The bright TFT display shows all the process relevant data. User friendly interface: The functions self-explanitory and are listed in alphabetical order in each of the selected languages. Easy-Control: Is virtually identical to the unistats. Display resolution in the basic version is 0,1K. Set point limits, optical and acoustical alarm, mains failure automatic function. Sensor calibration, control via RS232 interface and Com.G@te Namur (option) e.g. for connection to a process control system, remote control via data cable.
K12-cc-NRK12-mpc-NR
Specification :Operating temperature range-20...40 °C Temperature adjustment ; digital Temperature indication : digital Internal temperature sensor : Pt 100 Resolution of display : 0.1 K Temperature stability at -10°C : 0.2 K Safety classification : Class I / NFL Cooling power at 15°C : 0.3 kW at 0°C : 0.2 kW at -10°C : 0.14 kW at -20°C : 0.07 kW Refrigeration machineair-cooled, natural refrigerant Refrigerant : R290 Refrigerant quantity 0.04 kg
Measuring range 1. Titration volume : 0.005 to 99.995 mL2. Water content : 0.1mg to 500 mg H2O3. Water concentration 10ppm to 100% H2O
Burette Single burette
Endpoint detection Polarized potential level detection with twin platinum electrode
Endpoint sense method EP is determined when preset polarized potential elapses waiting timeWaiting time range : 1 ~ 99 sec
Titration form Normal titration
Burette precision 1. Capacity : 10 mL burette2. Dispense precision : ±0.015 mL3. Repeatability : ±0.005 mL
Key entry Direct input with keys on the touch screenCable between the panel and titration unit can be extended
Display 1. 8-inch (163.2 x 122.4 mm) 256-color Liquid Crystal Display with 800 x 600 dots2. Language : English or Japanese3. Real-time display of titration and evaporation curve
Calculation Water concentration , Statistics (Mean, SD and RSD),Auto averaging, Blank level and Factor value
Other features 1. Stirrer with auto reagent dispenser as standard equpment2. Auto drift cancellation with potential stat to maintain EP level3. Auto titration start by sensing sample discharge into the flask4. Up to 10 storage of blank values and factor values.
GLP conformance Check with standards : Notice of check date and record of check results.Reagent factor calibration : Prior notice of date for calibration and reagent, change and record of calibration resultsOperator registration : Up to 50 operators can be registered
External I/O COM port (Mini-DIN) x 2 channels for printer, balance and PC (Data capture software)
Power source 100~120 VAC / 200~240VAC, 50/60 Hz
Power consumption 1. Touch-screen control unit : 20W2. Measuring unit and stirrer : 30W
Dimensions 1. Touch-screen control unit : 230W x 280D x 255H (mm)2. Measuring unit : 120W x 363D x 610H (mm)3. Stirrer : 118W x 225D x 320H (mm)4. Solvent change unit : 240W x 170D x 280H (mm)5. Power burette : 120W x 363D x 610H (mm)
Standard components and parts Volumetric Karl Fischer measuring unitSolvent unit changeTouch screen main control unitMagnetic stirrerS-type titration vesselTwin platinum electrode M714Operation manualOthers
General Equipment
General Equipment
ModelKERN
Weighing range
(Max) g
Verific. Value
mg
Min. Loadmg
Reproducibilitymg
Linearitymg
ABJ 120-4M 120 1 10 0.1 +/- 0.2
ABJ 220-4M 220 1 10 0.1 +/- 0.2
ABT 320-4M 320 1 10 0.1 +/- 0.2
ModelKERN
Weighing range (Max) g
Readoutg
Linearityg
440-33N 200 0.01 +/- 0.02
440-35N 400 0.01 +/- 0.03
440-45N 1000 0.1 +/- 0.2
440-47N 2000 0.1 +/- 0.2
General Equipment
POLARIMETER—PS 8000
General Equipment
GLASSWARE WASHER-DRYER
Washer Model
Wash Levels
Internal Dimensions Features Drying (type)
820 LX 2 508 x 535 x 510 mm
Fitur tambahan: user bisa setting 2 program tambahan, eksternal chamber drying (heating element) dan internal glassware drying (injector+hepa filter)
Super Drying; washer-dryer with injection
drying
1300 LX 3 634 x 525 x 500 mm
Fully automatic washer/dryer has an electronic programmablemicroprocessor capable of storing upto 42 programs (4 pre-programmed,38 user definable, password protected) for pre-wash, wash, rinse, purified/ DI rinse, HEPA filtered drying & cooling.
Super Drying; washer-dryer with injection
drying
1800 LX 1-6 770 x 1064 x 510 mm
1-6 level wash, rack actuated via automatic manifold connection , two stainless still filter protect recirculation and drain pump from debris
Drying system : HEPA filtered chamber and direct injection drying
- Digital temperature controller- Case construction : Steel, with chemically resistant coating- Thermal insulation : Molded silica powder- Heating element : Nichrome wire- Sensor probe : CA (K) Type, Φ 4.8mm dia x 200mm long : 1.5mm lead- Power supply : 220V AC- Temp. range options : Low to 100˚C max, Medium to 200˚C
Accuracy ±0.8nm (full range 190 to 1100nm)± (546.11nm mercury line)
Scan Speed <1 to 6000nm/min.; variable
Photometric
Range >3.5A
Accuracy
0.5A: ±0.0004A1A: ±0.006A2A: ±0.010AMeasured at 440nm using neutral density filters traceable to NIST*/NLPL
• Local Control or PC configurations – with INSIGHT software provides compete set of data collection and processing tools• Wide accessory range with various temperature control options sample changers, sippers and solid sampling devices• System calibration, validation and data security tools• Complete set of BIO applications and accessories (Evolution 260)
General Equipment
Specifications :Capacity 24 x 1.5/2.0mL
Timer 1 to 99 min.Noise Level <56dbAMax. Speed
MicroCL 17/17R 13,300rpm
MicroCL 21/21R 14,800rpm
Max. RCF
MicroCL 17/17R 17,000xg
MicroCL 21/21R 21,100xg
TemperatureTemperature Range (17R and 21R only)
-9°C to +40°C, ±1°C
Dimensions
MicroCL 17/21 13.75 x 9.63 x 8.88 in. (25.2 x 24.3 x 22.5cm)
MicroCL 17R/21R 17.5 x 11.63 x 12.88 in. (44.5 x 29.5 x 33cm)
Net Weight
MicroCL 17 and 21 24.2 lbs. (11kg)
MicroCL 17R and 21R 61.7 lbs. (28kg)
General Equipment
SpecificationsCapacity 300mL (6x 50mL)
Display [LCD] 4-character LCD
Control Microprocessor
Speed Control 1000 to 5200rpm, ±100rpm
Max. Speed 5200rpm
Max. RCF 3350 x g
Timer5 sec. to 1 min. in 15 sec. increments; 1 to 5 min. in 5 sec. increments, 5 to 30 min. in 1 min. increments; HOLD to 99 min. 59 sec.
Noise <65dBA
Dimensions (L x W x H) 15.75 x 13.25 x 10.75 in. (40 x 34 x 27.5cm)
Height (Cover Open) 24 in. (61cm)
Net Weight 24 lb. (11kg)
Specifications
Capacity 4 x 135mL
Display Digital
Control Microprocessor
Control Speed Set/Step/Display 300 to 6500rpm, ±10rpm
Max. Speed 6500rpm
Max. RCF 3684xG
Feature(s) High/Low acceleration and braking
Timer 1 to 99 min. plus HOLD
Motor Direct-drive brushless induction
Noise <57dBA
Dimensions18.1L x 14.6W x 11 in.H (46 x 37 x 28cm)
Specification: Flow rate, up to : up to 2 l/min Operating pressure in bar, min/max : 2 – 6 bar Conductivity : 0.055 µS/cm Resistance at 25 °C : 18.2 MΩxcm TOC value : 1 – 5 ppb Bacterial content in KbE/ml : <1 Particles : < 1Endotoxines in EU/ml : 0,001 Electrical requirements : 230 V / 50Hz Power consumption : 1 kWFeedwater connector : R 3/4" Dimensions B x T x H in mm : 372 x 330 x 615 Weight : 23 kg
LAB TOWER EDI-15
Specification : Ultra-pure water specifications ASTM type I:Conductivity in µS × cm : 0.055Resistance in MΩ × cm : 18.2Removal performance l/min. : up to 2TOC-Value in ppb : < 10TOC-Value in ppb (models with UV) : 1 – 5Bacteria content in KbE/ml with sterile filter : < 1
Specification : Ultra-pure water specifications ASTM type I:Conductivity in µS × cm : 0.055Resistance in MΩ × cm : 18.2Removal performance l/min. : up to 2TOC-Value in ppb : < 10TOC-Value in ppb (models with UV) : 1 – 5Bacteria content in KbE/ml with sterile filter : < 1
General Equipment
ME 2C NT
Technical Data : Number of heads / stages : 1 / 1Max. pumping speed at 50/60 Hz m3/h : 2.1 / 2.4Max. pumping speed at 50/60 Hz cfm : 1.2 / 1.4Ultimate vacuum (abs.) mbar/torr : 70 / 52Ambient temperature range (operation)°C : 10 - 40Ambient temperature range (storage)°C : -10 - 60Max. back pressure (EX) (abs.) bar : 1.1Inlet connection (IN) : Hose nozzle DN 10 mmOutlet connection (EX) : Hose nozzle DN 10 mmRated motor power kW : 0.18Rated speed at 50/60 Hz min-1 : 1500/1800Degree of protection : IP 40Dimensions (L x W x H) mm : 243 x 211 x 198Weight kg : 10.2Noise level at 50 Hz, typ. dBA : 45
One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors at low vacuum requirement. In contrast to waterjet pumps they do not consume water and therefore do not produce any contaminated waste water in daily use. Typical applications are vacuum ovens, filtrations and multi-port manifolds for medium throughput, as well as pumping of gases and oil-free evacuation in general. The one-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar.
Vacuum controller CVC 3000E C3
Performance features:-controls vacuum, cooling water and venting on demand-intuitive operation with turn-and-tap jog wheel and clear text menus in 14 languages-interactive communication (PC) through RS 232C serial interface-manual/semi-automatic determination of vacuum setting-automatic setting of hysteresis with manual override Item Consist of:-CVC 3000 work station controller with mounted-in-line solenoid vacuum valve C3 and mounting rod.-With hose nozzles DN 6/10 mm towards pump and application.
Ordering data :Product name Mains voltage and frequency Plug Order no.CVC 3000E C3 100-230 V~ 50-60 Hz CEE/CH/UK/US/AUS 2614120
General Equipment
ROTARY VACUUM PUMPRE 2.5 / RZ 2.5 The one-stage RE 2.5 and two-stage RZ 2.5 are high-performance rotary vane pumps with extra compact design and low weight. They are the ideal solution for a wide range of laboratory and process applications that require low ultimate vacuum at medium gas flow rate.The pumping unit is compact, user-friendly, and well-arranged, with oil mist filter at the outlet, a valve, and a T-connection for a gauge. The RZ 2.5 is also available combined with the oil mist filter (FO) and the VS 16 valve as a package.
Ultimate partial vacuum (abs.) mbar 3 x 10-1 4 x 10-4
Ultimate vacuum (abs.) mbar/torr 3 x 10-1 / 2.3 x 10-1 2 x 10-3 / 1.5 x 10-3
Ultim. vac. (abs.) with gas ballast mbar/torr 8 x 10-1 / 6 x 10-1 1 x 10-2 / 0.75 x 10-2
Water vapor tolerance mbar 40 40
Ambient temperature range (operation) °C 12 - 40
12 - 40
Ambient temperature range (storage)
°C -10 - 60 -10 - 60
Oil capacity (B-Oil) min / max l 0.18 / 0.51 0.1 / 0.28
Max. back pressure (EX) (abs.) bar 1.1 1.1
Inlet connection (IN) Small flange KF DN 16 Small flange KF DN 16
Outlet connection (EX) Hose nozzle DN 10 mm Hose nozzle DN 10 mm
Rated motor power kW 0.18 0.18
Rated speed at 50/60 Hz min-1 1500/1800 1500/1800
Degree of protection IP 40 IP 40
Dimensions (L x W x H) mm 316 x 125 x 190 316 x 125 x 190
General Equipment
VARIO® chemistry diaphragm pump MZ 1C VARIO
Technical data Vacuum controller : CVC 3000Number of heads / stages : 2 / 2Max. pumping speed (m3/h) : 1.0Max. pumping speed (cfm) : 0.6Ultimate vacuum (abs.) mbar/torr : 12 / 9Ultim. vac. (abs.) with gas ballast mbar/torr : 20 / 15Ambient temperature range (operation) °C : 10 - 40Ambient temperature range (storage) °C : -10 - 60Max. back pressure (EX) (abs.) bar : 1.1Inlet connection (IN) : Hose nozzle DN 10 mmOutlet connection (EX) : Hose nozzle DN 10 mmRated motor power kW : 0.16
VARIO® chemistry diaphragm pump MZ 1C VARIO
Technical data Vacuum controller : CVC 3000Number of heads / stages : 2 / 2Max. pumping speed (m3/h) : 1.0Max. pumping speed (cfm) : 0.6Ultimate vacuum (abs.) mbar/torr : 12 / 9Ultim. vac. (abs.) with gas ballast mbar/torr : 20 / 15Ambient temperature range (operation) °C : 10 - 40Ambient temperature range (storage) °C : -10 - 60Max. back pressure (EX) (abs.) bar : 1.1Inlet connection (IN) : Hose nozzle DN 10 mmOutlet connection (EX) : Hose nozzle DN 10 mmRated motor power kW : 0.16
Ordering dataProduct name Mains voltage and frequency Plug Order no.MZ 1C VARIO 200-230 V~ 50-60 Hz CEE 696670
100-120 V~ 50-60 Hz
General Equipment
Chemistry DIAPHRAGM PUMP MZ 2C NT
Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The two-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum. All major parts in contact with pumped media are made of chemically resistant fluoroplastics.The new NT-series features further improved performance data and superior vapor tolerance.
Technical data
Number of heads / stages : 2 / 2Max. pumping speed at 50/60 Hz m3/h : 2.0 / 2.3
Max. pumping speed at 50/60 Hz cfm : 1.2 / 1.4
Ultimate vacuum (abs.) mbar/torr : 7 / 5
Ultim. vac. (abs.) with gas ballast mbar/torr : 12 / 9
Ambient temperature range (operation) °C : 10 - 40
Ambient temperature range (storage) °C : -10 - 60
Max. back pressure (EX) (abs.) bar : 1.1
Inlet connection (IN) : Hose nozzle DN 10 mm
Outlet connection (EX) : Hose nozzle DN 10 mm
Rated motor power kW : 0.18
Rated speed at 50/60 Hz min-1 : 1500/1800
Degree of protection : IP 40
Dimensions (L x W x H) mm : 243 x 243 x 198
Weight kg : 11.1
CE mark : Yes
NRTL certification :Canada and the USA
Items supplied :Pump completely mounted, ready for use, with manual
This chemistry vacuum system has a wide range of applications like evacuation, evaporation and pumping of gases and vapors in chemical, biological and pharmaceutical laboratories. Typical applications are rotary evaporators, vacuum concentrators and vacuum drying ovens. The separator at the inlet (AK), made of glass with protective coating, retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling, and active protection of the environment.
MZ 2C NT +AK+EK
General Equipment
Capacity : 1 liter Switch setting : two speed : high 22,000 and low 18,000 60 second mechanical timer Base : die cast epoxy coated base (8010BU) Container : stainless steel container with handle and stainless steel
Capacity : 4 liter Switch setting : Off – Lo – Med – Hi – Pulse RPM : 16,800 – 18,800 – 21,500 – 21,500 Rating : 230 Volts – 50/60Hz – Single phase – AC -7.5Amps Base : Die cast gray epoxy coating Container : Stainless steel with Stainless steel blades – Stainless steel
clamp on lid with rubber gasket & stopper Bearing : High performance ball bearings Overall height : 22.25 inches (56.5 cm) Weight : Net shipping weight 38 lbs (17.24 kg)