This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Alarm BoxUser Manual
Version 3.00
ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, P. R. China 518057 Tel: (86) 755 26771900 800-9830-9830 Fax: (86) 755 26772236 URL: http://support.zte.com.cn E-mail: [email protected]
6/20/2007 R1.1 sjzl20070533 Updated for (V 3.08.19.02)
ZTE CORPORATION Values Your Comments & Suggestions! Your opinion is of great value and will help us improve the quality of our product documentation and offer better services to our customers.
Please fax to: (86) 755-26772236; or mail to Documentation R&D Department, ZTE CORPORATION, ZTE Plaza, A Wing, Keji Road South, Hi-Tech Industrial Park, Shenzhen, P. R. China 518057.
Thank you for your cooperation!
Document Name Alarm Box (V 3.00) User Manual
Product Version V 3.00 Document Revision Number R1.1
Equipment Installation Date
Presentation: (Introductions, Procedures, Illustrations, Completeness, Level of Detail, Organization, Appearance)
# Please feel free to write any comments on an attached sheet.
If you wish to be contacted regarding your comments, please complete the following:
Name Company
Postcode Address
Telephone E-mail
This page is intentionally blank.
Contents
About this Manual............................................................. i
Purpose................................................................................ i Intended Audience ................................................................. i Prerequisite Skill and Knowledge .............................................. i What is in This Manual............................................................ i Related Documentation.......................................................... ii Conventions......................................................................... ii How to Get in Touch............................................................. iii
Confidential and Proprietary Information of ZTE CORPORATION i
About this Manual
Purpose
This Manual provides procedures and guidelines that support the operation and description of the ZTE Alarm Box (V 3.00).
Intended Audience
This document is intended for engineers and technicians who perform operation activities on the ZTE Alarm Box.
Prerequisite Skill and Knowledge
To use this document effectively, users should have a general understanding of wireless telecommunications and CDMA technology. Familiarity with the following is helpful:
ZXC10 BSSB system and its various NEs
User interfaces on the NetNumenTM M3(ZXC10 BSSB)
What is in This Manual
This Manual contains the following chapters:
T AB L E 1 C H AP T E R S U M M AR Y
Chapter Summary
Chapter 1 Introduction
Describes the overall information of ZTE Alarm Box.
Chapter 2 Alarm Box Management
Describes the management and settings of ZTE Alarm Box in NetNumenTM M3 (ZXC10 BSSB) (V 3.08.19.02).
Chapter 3 Telnet Command
Describes ZTE alarm Box Commands via Telnet access.
Alarm Box (V3.00) User Manual
ii Confidential and Proprietary Information of ZTE CORPORATION
Related Documentation
The following documentation is related to this manual:
ZXC10 BSSB (V 8.0.1.9) CDMA2000 Base Station System Alarm Processing Manual
NetNumen M3 (ZXC10 BSSB) (V 3.08.19.02) Hardware Installation Manual
Conventions
ZTE documents employ the following typographical conventions.
T AB L E 2 TY P O G R AP H I C AL C O N V E N T I O N S
Typeface Meaning
Italics References to other Manuals and documents.
“Quotes” Links on screens.
Bold Menus, menu options, function names, input fields, radio button names, check boxes, drop-down lists, dialog box names, window names.
CAPS Keys on the keyboard and buttons on screens and company name.
Constant width Text that you type, program code, files and directory names, and function names.
[ ] Optional parameters.
{ } Mandatory parameters.
| Select one of the parameters that are delimited by it.
Note: Provides additional information about a certain topic.
Checkpoint: Indicates that a particular step needs to be checked before proceeding further.
Tip: Indicates a suggestion or hint to make things easier or more productive for the reader.
T AB L E 3 M O U S E OP E R AT I O N C O N V E N T I O N S
Typeface Meaning
Click Refers to clicking the primary mouse button (usually the left mouse button) once.
Double-click Refers to quickly clicking the primary mouse button (usually the left mouse button) twice.
Typographical Conventions
Mouse Operation
Conventions
About this Manual
Confidential and Proprietary Information of ZTE CORPORATION iii
Typeface Meaning
Right-click Refers to clicking the secondary mouse button (usually the right mouse button) once.
Drag Refers to pressing and holding a mouse button and moving the mouse.
How to Get in Touch
The following sections provide information on how to obtain support for the documentation and the software.
If you have problems, questions, comments, or suggestions regarding your product, contact us by e-mail at [email protected]. You can also call our customer support center at (86) 755 26771900 and (86) 800-9830-9830.
ZTE welcomes your comments and suggestions on the quality and usefulness of this document. For further questions, comments, or suggestions on the documentation, you can contact us by e-mail at [email protected]; or you can fax your comments and suggestions to (86) 755 26772236. You can also browse our website at http://support.zte.com.cn, which contains various interesting subjects like documentation, knowledge base, forum and service request.
Customer Support
Documentation Support
Alarm Box (V3.00) User Manual
iv Confidential and Proprietary Information of ZTE CORPORATION
This page is intentionally blank.
Confidential and Proprietary Information of ZTE CORPORATION 1
C h a p t e r 1
Introduction
This chapter describes:
NetNumenTM M3(ZXC10 BSSB) Alarm Box
Alarm Box User Interface
Alarm Box Setting
Disposing Alarms
Alarm Box (V3.00) User Manual
2 Confidential and Proprietary Information of ZTE CORPORATION
NetNumenTM M3 (ZXC10 BSSB) Alarm Box Through alarm box, users can achieve the following functions:
Receive short alarm messages: The alarm box will send these messages to certain users.
View alarms: Alarm Box will show the alarms through LCD and alarm indicator light.
Receive audio alarms: Alarm box makes sound to indicate current alarms.
Convey Alert information: Receive data (alarm information, alert information and files) from background. Configure alert channel based on background. Immediately send the data back to emergency management center via GPRS channel, fixed Modem, or CDMA2000 channel.
Many-in-one alarm: Up to five alarm servers can be connected.
The alarm system consists of alarm box and control server, which is usually the OMM server.
Figure 1 illustrates alarm system structure.
F I G U R E 1 AL A R M S Y S T E M
TCP/IP
Control Server
MS
RS232Custom
Interfaces
Alarm BoxEquipment
The fault management server connects to the alarm box and transfers alarms to it over TCP/IP. Then the alarm box shows the alarms and sends them to the users.
User can set the alarm level to send and receive messages through the alarm management client.
Functionality
Alarm System
Chapter 1 Introduction
Confidential and Proprietary Information of ZTE CORPORATION 3
Alarm Box User Interface Figure 2 illustrates alarm box menu.
F I G U R E 2 AL A R M BO X M E N U
Menu
Alarm Box (V3.00) User Manual
4 Confidential and Proprietary Information of ZTE CORPORATION
Table 4 describes alarm box icons.
T AB L E 4 AL AR M B O X I C O N S
Icon Function
Play alarm sound.
Play no alarm sound. It means that MUTE is pressed.
Communication of alarm box phone module is normal.
Communication of alarm box phone module is excepted.
Network connection with server is broken off.
Network connection with server is normal.
Succeeded in sending short message.
Failed to sending short message.
Alarms: The first number indicates the number of new alarms in other menu, but it indicates the current alarm' sequence number in the querying alarm menu. The second number indicates the total number of alarms.
These signs respectively correspond to the Up, Down, Left and Right key.
It corresponds to C (return) key.
It corresponds to OK key.
Table 5 describes alarm box keys.
T AB L E 5 AL AR M B O X K E Y S
Key Function
C Return the upper level menu.
OK Confirmation key. Press it to confirm the operation
M Open menu, such as the main menu and deleting-alarm menu.
Icons
Keys
Chapter 1 Introduction
Confidential and Proprietary Information of ZTE CORPORATION 5
Key Function
RST Reset the alarm box.
MUTE Switch the alarm sound playing mode between playing and mute.
Up, Down Move up or down in menu. Increase or decrease the number in IP address and port.
Left, Right Move the cursor.
Table 6 describes indicator lights.
T AB L E 6 TH E I N D I C AT O R L I G H T S O F AL AR M B O X
Indicator Light
Signification
EMERGENCY First level alarm
IMPORTANT Second level alarm
COMMON Third level alarm
NOTIFICATION Fourth level alarm
MUTE Sound switching indicator light
LINK Network connecting indicator light
RUN Program running light, flash at a second.
Alarm Box Setting The IP address of alarm box must be in the same subnet with the server, for example, if server's IP address is 192.176.120.129, then alarm box's can be 192.176.120.254. Default address is xxx.xxx.xxx.254, and default port is 5000.
Set the IP address of server in the alarm box menu Parameter Set>Server IP Set, which must be set in the same subnet with alarm box.
Set the gate in the menu Parameter Set>NetStorm Gate. Alarm box will show audio and phonic alarms while network broadcasting message exceeds the gate.
Select the mode in the menu Parameter Set>Alarm Tone Mode as speech or beep alarm.
Sound volume, LCD background light and keystroke sound settings can all be done in the menu Parameter Set.
Indicator Lights
IP Address and TCP Port
Setting
Server IP Address Setting
Network Storm Gate Settings
Selecting Alarm Tone
Mode
Other Settings
Alarm Box (V3.00) User Manual
6 Confidential and Proprietary Information of ZTE CORPORATION
Note: The Gate of Network Storm must be set according to the actual network while smaller settings leads to misinformation and bigger settings fail to detect network storm. Normally, the default setting is 200.
Disposing Alarms When an alarm is received, the system will give phonic indicator; LCD will show it for 5 seconds before returning to main menu; alarm box sends it to the certain users.
Alarm box can save 10 pieces of alarms.
Select the Warning Query menu, press the OK key to view the latest alarm and press the Up or Down key to view other alarms.
Select the Warning Query menu, press OK to view the latest alarm and press the Up or Down key to view other alarms. Select the alarm to be deleted and press the M key to display the deleting menu. In the deleting menu, select Delete One to delete the current alarm or Delete All to delete all the alarms in the alarm box. Press the C key to return to the upper menu.
Press the MUTE key to cancel the alarm sound while an alarm generates, but alarm sound will appear when a new alarm generates.
Reporting Alarm
Saving Alarm
Viewing Alarm
Deleting Alarm
Canceling Alarm Sound
Confidential and Proprietary Information of ZTE CORPORATION 7
C h a p t e r 2
Alarm Box Management
This chapter describes:
NetNumenTM M3 (ZXC10 BSSB) Alarm Box Management
Setting User Information
Setting Control Parameters
Alarm Box (V3.00) User Manual
8 Confidential and Proprietary Information of ZTE CORPORATION
NetNumenTM M3 (ZXC10 BSSB) Alarm Box Management Use the alarm box management module to visually set user information and control parameters of the alarm box. It supports sound, visual and short messages to show alarms. In this way, the O&M personnel would timely know and handle all the faults to ensure BTS normal and reliable.
The following section describes the procedure to enter the alarm box management interface.
1. In the NetNumenTM M3 (ZXC10 BSSB), click the Views>Fault Management>Alarm Box Management menu to enter the alarm box management main interface.
2. Click a button in the tool bar to perform the corresponding operation.
END OF STEPS
Alarm Box Management Interface appears.
Note:
Start up the server program before starting the client program.
Avoid server shutdown, because it may lead to abnormal client operation.
Setting User Information This section describes the procedures to add, modify, delete or view alarm box user information.
Add User
1. In the NetNumenTM M3 (ZXC10 BSSB), click Views>Fault Management>Alarm Box Management menu to enter the alarm box management main interface.
2. In the User Information tab page, click Add New User button in the tool bar, Add New User interface pops up.
3. Fill in the User name, Short message number and select the alarm level in which alarms will be sent to this user.
4. Click the OK, to popup Confirm dialog box, or click Cancel to cancel the creation operation.
Description
Steps
Result
Description
Steps
Chapter 2 Alarm Box Management
Confidential and Proprietary Information of ZTE CORPORATION 9
5. Click OK to add the user. Or click Cancel to cancel the creation operation.
Note: Make sure that length of the user name is less than 20 characters and length of the short message number is less than 11 digits.
END OF STEPS
New user is added.
Display Detailed User Information
1. In the NetNumenTM M3 (ZXC10 BSSB), click Views>Fault Management>Alarm Box Management menu to enter the alarm box management main interface.
2. Select a user from the user lists in the User Information tab page and click the User detail button in the tool bar. Then, a User detail interface pops up.
END OF STEPS
Complete user information is displayed.
Modify User Information
1. In the NetNumenTM M3 (ZXC10 BSSB), click Views>Fault Management>Alarm Box Management menu to enter the alarm box management main interface.
2. Select a user from the user lists in the User Information tab page and click the Modify user button in the tool bar. Then, Modify user interface pops up.
3. Modify the user information and then click OK to finish modification of the user information, or click Cancel to cancel the modification operation.
END OF STEPS
User Information is modified.
Delete User Information
1. In the NetNumenTM M3 (ZXC10 BSSB), click Views>Fault Management>Alarm Box Management menu to enter the alarm box management main interface.
2. Select a user from the user lists in the User Information tab page and click the Delete user button in the tool bar. Then, a Confirm interface pops up.
3. Click OK to delete the user or click Cancel to cancel the deletion operation.
END OF STEPS
User information is removed from the system.
Result
Steps
Result
Steps
Result
Steps
Result
Alarm Box (V3.00) User Manual
10 Confidential and Proprietary Information of ZTE CORPORATION
Refresh the New User List
1. In the NetNumenTM M3 (ZXC10 BSSB), click Views>Fault Management>Alarm Box Management menu to enter the alarm box management main interface.
2. In the User Information tab page, click the Refresh user list button in the tool bar to refresh the user lists.
END TO STEPS
User list is refreshed and new user list is displayed.
Setting Control Parameters Use Setting Control Parameters to set the alarm levels in which alarms create sound, display on LCD panel, or sent to the user.
1. In the NetNumenTM M3 (ZXC10 BSSB), click Views>Fault Management>Alarm Box Management menu to enter the alarm box management main interface.
2. Click the Control Parameters tab.
3. Select the needed alarm levels, Click the Submit button to modify the corresponding parameters.
4. Click OK to confirm.
END OF STEPS
Control Parameters settings are completed.
Note:
Start up the server program before starting the client program.
Avoid server shutdown, because it may lead to abnormal client operation.
Steps
Result
Description
Steps
Result
Confidential and Proprietary Information of ZTE CORPORATION 11
C h a p t e r 3
Telnet Command
This chapter describes:
Telnet Alarm Box
Alarm Box (V3.00) User Manual
12 Confidential and Proprietary Information of ZTE CORPORATION
Telnet Alarm Box Telnet login is supported by alarm box. MML command is preferred for alarm box management. The telnet port on alarm box is port 601.
Make sure the network cable is connected with alarm box. Ping requests can be sent to alarm box successfully.
In Windows, click Start>Run and type in cmd. In the CLI window, type in
Telnet IP address of alarm box 601
Input password to enter MML interface.
Available MML commands for alarm box telnet operation are as follows:
Ping
Routeshow
Routeadd
Routedelete
RouteFlashShow
RouteSave
RouteErase
TcpCfgShow
CfgTcpCommclock
Ping
It confirms that the computer with designated IP is accessible. Number of messages can be specified with IP address. Three messages are in default.
Ping [IP address] <number of messages>
IP address: IP address of the network node to be checked
Number of messages: Number of returned messages. It should be an integer greater than 0. 3 is the default value.
Ping returns the messages replies. Better network condition comes with prompt reply. Ping also returns message loss rate. Better network condition comes with lower loss rate.
Three messages are returned:
601>ping 10.41.32.28
PING 10.41.32.28: 56 data bytes
Description
Instructions
MML command set
Function
Format
Parameters
Result
Example
Chapter 3 Telnet Command
Confidential and Proprietary Information of ZTE CORPORATION 13
64 bytes from zhaoyang (10.41.32.28): icmp_seq=0. time=0. ms
64 bytes from zhaoyang (10.41.32.28): icmp_seq=1. time=0. ms
64 bytes from zhaoyang (10.41.32.28): icmp_seq=2. time=0. ms
----10.41.32.28 PING Statistics----
3 packets transmitted, 3 packets received, 0% packet loss
round-trip (ms) min/avg/max = 0/0/0
Five messages are returned:
601>ping 10.41.32.28 5
PING 10.41.32.28: 56 data bytes
64 bytes from zhaoyang (10.41.32.28): icmp_seq=0. time=10. ms
64 bytes from zhaoyang (10.41.32.28): icmp_seq=1. time=0. ms
64 bytes from zhaoyang (10.41.32.28): icmp_seq=2. time=0. ms
64 bytes from zhaoyang (10.41.32.28): icmp_seq=3. time=0. ms
64 bytes from zhaoyang (10.41.32.28): icmp_seq=4. time=0. ms
----10.41.32.28 PING Statistics----
5 packets transmitted, 5 packets received, 0% packet loss
round-trip (ms) min/avg/max = 0/2/10
Routeshow
This command shows the routing tables in use. It helps to check the routing tables in use before route updating.
Routeshow
No parameter is available for this command
This command shows route net table and route host table.
Save routing information into Flash. The information will be automatically loaded when alarm box reboots. Reboot from Flash avoids reload routing table.
RouteSave
Reference
Function
Format
Parameters
Result
Example
Reference
Function
Format
Chapter 3 Telnet Command
Confidential and Proprietary Information of ZTE CORPORATION 17
NA
System will prompt a message if it is saved successfully.
T AB L E 7 D E F I N I T I O N O F AL AR M S E R V E R P AR AM E T E R S
Parameter Meaning
LocalIp IP address of alarm box
LocalMask subnet mask of alarm box
Port0 1st port of alarm server
ServerIp0 IP address of 1st alarm server
link0 state connection status of 1st alarm server
Port1 port of 2nd alarm server
ServerIp1 IP address of 2nd alarm server
Link1 state connection status of 2nd alarm server
Port2 port of 3rd alarm server
ServerIp2 IP address of 3rd alarm server
Link2 state connection status of 3rd alarm server
Port3 port of 4th alarm server
ServerIp3 IP address of 4th alarm server
Link3 state connection status of 4th alarm server
Port4 port of 5th alarm server
ServerIp4 IP address of 5th alarm server
Link4 state connection status of 5th alarm server
CfgTcpComm Reference
Alarm Box (V3.00) User Manual
20 Confidential and Proprietary Information of ZTE CORPORATION
CfgTcpComm
Configure the connection parameters of the specified alarm box server.
Up to 5 alarm servers (0~4) can be connected with alarm box. This command is only applicable to alarm server 1~4.
RouteErase [Sequence] [SERVER IP] [PORT]
Sequence: Alarm server number. Up to 5 alarm servers can be connected with alarm box. This command is only applicable to alarm server 1~4.
SERVER IP: IP address of the alarm server. If the alarm server will be canceled, leave this parameter as NO.
PORT: Alarm server port. If the alarm server will be canceled, leave this parameter as NO.
If the operation is successful, system prompt will appear.
Configure the IP address and port of alarm server 1 as 195.152.115.129 and 5000:
601> cfgTcpComm 1 195.152.115.129 5000
Cancel alarm server 1:
601> cfgTcpComm 1 NO NO
Note:
Use tcpCfgShow to show the operation result.
This command is only applicable to alarm server 1~4, use command cfgTcpComm 0 195.152.115.129 5000, there will be an error as the information of the first server needs to be configured with menu on the LCD screen.
TcpCfgShow
Clock
Configure system time of alarm box
Clock [year] [mon][day][week][hour][min][sec]
Year: The year of system time, represented by 4 integers.
Mon: The month of system time, represented by integers (1~12).
Day: The day of system time, represented by integers (1~31).
Week: The week of system time, represented by integers (1~7).
Hour: The hour of system time, represented by 2 integers (0~23).
Function
Format
Parameters
Result
Example
Reference
Function
Format
Parameters
Chapter 3 Telnet Command
Confidential and Proprietary Information of ZTE CORPORATION 21
Min: The minute of system time, represented by 2 integers (0~59).
Sec: The second of system time, represented by 2 integers (0~59).
If the operation is successful, the current time will be displayed after configuration.
Configure the current time: 2005-9-7 Wed. 12:20:34,
601>clock 2005 9 7 3 12 20 34
Clock is adjusted to 2005-9-7 Wed. 12.20.34
Result
Example
Alarm Box (V3.00) User Manual
22 Confidential and Proprietary Information of ZTE CORPORATION
This page is intentionally blank.
Alarm Box (V3.00) User Manual
23 Confidential and Proprietary Information of ZTE CORPORATION
Index
BSSB ................................ i, ii BTS .....................................8 CAPS ................................... ii CDMA ....................................i CDMA2000 ......................... ii, 2 COMMON ................................5 E 1, 3 INFORMATION ........................2 IP 2, 5, 12, 14, 15, 19, 20 LEGAL..................................2 LINK ...................................5 N/A .....................................3 NET ........................ 13, 14, 15
O&M.....................................8 OMC.................................. i, 8 P 1, 3 PORT ................................. 20 R&D.....................................3 R1 3 ROUTE .................... 13, 14, 15 RST.....................................5 SERVER .............................. 20 TABLE .................... 13, 14, 15 URL.....................................1 V 3, ii ZXC10 .............................. i, ii
Alarm Box (V3.00) User Manual
24 Confidential and Proprietary Information of ZTE CORPORATION
This page is intentionally blank.
Alarm Box (V3.00) User Manual
Confidential and Proprietary Information of ZTE CORPORATION 25