This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
BEARING AND RACES INSTALLATION POSITION AND DIRECTION
FORWARD AND REVERSE CLUTCH ASSEMBLY
4
A Division of Freudenberg-NOKORIGINAL
DIRECT CLUTCH
5
REVERSE CLUTCH CLEARANCE
6
0.016" - 0.039" (0.4 - 1.0 mm)
FORWARD CLUTCH CLEARANCE
0.043" - 0.059" (1.1 - 1.5 mm)
As shown in the illustration, place a straight edge on the transaxle case and measure the distance between the 2nd coast & O/D brake flange and straight edge using vernier calipers. (Dimension A)
As shown in the illustration, place a straight edge on the O/D brake piston and measure the distance between the transaxle rear cover and straight edge using vernier calipers. (Dimension B)
Calculate the piston stroke value using the following formula. Select a flange which satisfies the piston stroke value and install it.
Piston stroke = Dimension A - Dimension BPiston stroke: 0.65 - 1.05 mm (0.0256” - 0.0413”)
O.D. / 2nd Coast Brake Clutch Clearance
A Division of Freudenberg-NOKORIGINAL
7
F1 ONE-WAY CLUTCH ROTATION
Hold
Turn
Lock
Freely
ANTI-RATTLE CLIP ROTATION
CHECK VALVE LOCATION
INPUT SHAFT END PLAY
Using a dial indicator, measure the input shaft end play