-
7/27/2019 Airport Inspection Solutions
1/4pecificaons subject to change without noce. Copyright 2011 MISTRAS Group, Inc. All Rights Reserved. www.mistrasgroup
Services
DivisionA s se t P ro t ec t i on So lu t i on s
#300B-11100-02
Solutions Bulleti
FAA insPectiOn FAciLitY
MISTRAS in Baton Rouge, LA is an Inspecon
Lab providing state-of-the-art Non-Destrucve
Tesng (NDT) services to airports in the region.
MISTRAS also employs an R&D Department
that develops advanced NDT methods tailored
to specic aircra and aircra component
needs. In addion, we are an ISO and PED
Accredited Tesng Lab that meets or exceeds
FAA standards for NDT and other inspecon
disciplines.
Along with our Baton Rouge, LA facility, we
have numerous MISTRAS Service centers
strategically located throughout the United
States to serve your NDT needs, provide
NDT Training, Recercaon and Level-III
support across all areas of airport inspecon.
With a MISTRAS inspecon management
and maintenance program, safety and
performance will improve considerably, while
saving on delay and maintenance costs.
AviAtiOn
MISTRAS provides non-destrucve tesng of
composite materials and fabricated structures
to ensure the quality of newly manufactured
or in-service assets. We oer ve NADCAP
Approved and FAA Repair Staons throughout
the United States
no-Du t Mhod:
(See diagram inside)
A Radiography, Low Voltage, High Voltage,Gamma Ray & Computerized
B Eddy Current
c Phased Array/Linear Array
D Ultrasonicse Liquid Penetrant
F Magnec Parcle
g Posive Material Idencaon
H Advanced Nondestrucve TesngTechnologies
i Thermography/Infrared
J Acousc Emission
K Visual Inspecon
L Predicve Maintenance (PdM) Services
ipo capabl: 30 x 14 Wet-Horizontal Magnec Parcle
Inspecon Bench (Rapid Small Parts
Inspecon)
15 x 26 Liquid Penetrant Inspecon Staon
(Rapid Small Parts Inspecon)
20 x 25 X-Ray Booth with three X-Ray
Tubes 200 KV, 250 KV & 300 KV
40 x 40 Gamma Ray Inspecon Booths
with IR-192 & SE-75
20 & 40 Ultrasonic Through-Transmission,
Data Acquision C-Scan System
i s A F eq
Manual Through-Transmission Squirter &
P/E Systems
Immersion Data Acquision C-Scan Systems
Bond Tesng Resonance, Pitch-Catch, MIA
Low KV X-ray & Digital X-ray
Mul-Channel Ultrasonic Tube Scanning
Immersion Systems for Wrought Material oLarge Parts
Call Out Services for Field Inspecons
Level III Services, Consultaon, Training
Fully Automated Ultrasonic Immersion
System with Contour Following, Tank Sizes
Ranging from 3 x 4 to 12 x 40
UT Bar Rotang Systems with a Size Tesng
Range of 0.250 to 7.00
Large Diameter Tube Tester, Ulizes ve
Channel Test
Wet Horizontal MT Benches
t s s
Aviaon
New Aerospace Structures
Aging Aircra
Ground Support Equipment
Fire Equipment
Tanks, Pressure Vessels and Piping
Elevator Inspecon
Facilies Maintenance
Electrical Substaons (Transformers)
A
B
C
DE
F
G
H
I
J
K
L
-
7/27/2019 Airport Inspection Solutions
2/4
-
7/27/2019 Airport Inspection Solutions
3/4pecificaons subject to change without noce. Copyright 2011 MISTRAS Group, Inc. All Rights Reserved. www.mistrasgroup#300B-11100-02
grOUnD sUPPOrt insPectiOn
Our Aerial li device on-site inspecon program
uses the most comprehensive technologies
in the industry. To ensure the safe operaon
of crical equipment we use global Acousc
Emission inspecons that exceed ASTM & NFPA
standards and assures equipment owners that
their assets can be operated safely. We inspect
the upper and lower boom including berglass,
hoses, leveling system, etc. to locate defects
that may cause a free fall, free rotaon and/
or dielectric failure. Visual and operaonal
inspecon of all crical, structural areas are
performed via magnec parcle, ultrasonic
and dye penetrant NDE methods in accordance
with ANSI A92.2 and OSHA 1910- 1926.
Live Line tOOLs AnD HArD cOverUP
insPectiOn
Tesng and cercaon of electric workers
safety equipment is essenal to both ensure
worker safety, and comply with industry
regulatory standards. MISTRAS provides
a comprehensive Live Line Tool in-service
maintenance and dielectric tesng program
for all your service needs.
We perform tests in accordance with OSHA
1910 and IEEE Std 978-1984, including visual
inspecon, cleaning, waxing, and dielectric
tesng of live line tools such as hot scks,
berglass reinforced plaorms, insulang
jumper cables, bypass tubes, and more.
eLectricAL sUBstAtiOns trAnsFOrMers
Our diagnosc and health monitoring services
for High Voltage Power Equipment, allows
you to make mely decisions based on the
transformer condion while it remains in
service, without aecng its operaon. We
use several non-destrucve tesng techniques
for electrical substaon inspecon, such as the
following:
Acousc Emission
Dissolved Gas Analysis
High Frequency Current Transducer
Oil-Quality Tests
Infrared
Vibraon
Visual Inspecon
tAnKs PressUre vesseLs & PiPing
No Tank Too Big or Too Small to Test!
To determine if tanks are safe for connued
service from a mechanical integrity standpoint,
our regulatory compliant inspecon plans
ulize tradional and manual NDT techniques,
such as visual, ultrasonic and selement
surveys. With our in-service and out-of-service
inspecon guidelines, and our customizednon-intrusive tank inspecon program, we
can determine the relave condion of your
storage tanks without entering the asset.
All of our API-653 inspecons ulize our
electronic reporng system allowing the
rapid generaon of eld tank reports on site.
Reports are fully completed by the me the
crew demobilizes from the job site.
eLevAtOr insPecti On
Through our partners, we provide inspecon
and cercaon of your elevator systems
with our tradional non-destrucve tesng
methods, ensuring safe and ecient operaon.
Our suite of tradional NDT inspecon
techniques includes:
Ultrasonic tesng of components both in
the shop and on the eld.
Visual tesng to several industry specic
qualicaons and cercaons.
Acousc Emission inspecon of stress
deformaons.
Cable Inspecons, Weight tesng & more!
Fire APPArAtUs insPectiOn services
Our Transportaon Center of Excellence
features highly qualied technicians (cered
in accordance with SNT-TC-1A and CP-189
and advanced inspecon equipment to
provide unbiased evaluaons that extend the
safe operang life of your re apparatus. We
specialize in aerial li and pump trucks, ground
ladders and other re equipment.
Our re apparatus inspecon includes:
Ground Ladder Inspecon
Pump Tesng
Aerial Li Device Inspecon
Line Voltage Electrical System Tesng
Foam Systems Tesng
Aircra Rescue Fire Fighng (ARFF)
Vehicle Tesng
i s A F eq
-
7/27/2019 Airport Inspection Solutions
4/4pecificaons subject to change without noce. Copyright 2011 MISTRAS Group, Inc. All Rights Reserved. www.mistrasgroup
WORLDWIDE HEADQUARTERS:
195 Clarksville Rd Princeton Jct, NJ 08550 USAT: +1.609.716.4150 F: +1.609.716.4145E-MAIL: [email protected]
MIDWEST REGION
TEL: +1.630.230.3400
GULF REGION
TEL: +1.281.478.1600
NORTHEAST REGION
TEL: +1.610.497.0400
MOUNTAIN REGION
TEL: +1.303.393.9689
WEST REGION
TEL: +1.562.597.3932
SOUTHEAST REGION
TEL: +1.704.291.2360
MISTRAS-IMPRO
TEL: +1.661.829.1192
MID-ATLANTIC REGION
TEL: +1.804.745.5830
AIMS DIVISION
TEL: +1.281.984.7873
PRODUCTS & SYSTEMS
TEL: +1.609.716.4000
#300B-11100-02
FAAs Aging Aircr AFt initi Ative:
A majo adam Halo Bol
rfao u ou o-a
Aou emo mhod
MISTRAS Halon Bole Recercaon System
(HBRS) is a dedicated product, designedspecically for tesng Halon 1301 aircra
re exnguisher spheres from 5 to 16 inches
in diameter. Conceptually developed by
the Sandia Naonal Laboratory, funded by
FAAs aging aircra iniave and designed
and manufactured by MISTRAS, the system
consists of state-of-the-art Acousc Emission
(AE) instrumentaon and applicaon-specic
soware.
A 200 lb. capacity slide-out tray in the Test
Chamber holds the Halon bole test xture.
The Halon bole is inserted into this xture,
where the holding (or resng) points are thesensors used to detect AE signals during the
test sequence. Sensor cables from the xture
are neatly routed through the side of the
Test Chamber to the Operator Console. A
thermocouple is aached to the Halon bole
prior to the test. This thermocouple is also fed
to an outside digital temperature meter, and a
voltage indicave of the actual temperature is
i s A F eq
MistrAs FAA r sFAA rpa sao X3Ur180Y Bao rou, LA.
The Baton Rouge facility holds the following rangs: Airframe, Power-plant, Propellers, Rotor Blades, Accessories and NondestrucveInspecon, Tesng and Processing and is supported by four sister Repair Staons in the United States. Qualicaons include PED (Pressure
Equipment Direcve), AS9100/ISO 9001 and FAA.
FAA rpa sao rF2r133L ea gaby, ct
Qualicaons include NADCAP Accreditaon, AS9100/ISO 9001 and the following Aerospace Approvals; PWA (East Harord and Canada)
Sikorsky, Rolls Royce, Hamilton-Sunstrand, General Dynamics, and GEAE, GE ground turbine. MIL-STDs, ASME, ASTM.
FAA rpa sao rF2D133L Aubu, MA (all fom ea gaby, ct)
Qualicaons include NADCAP Accreditaon, AS9100/ISO 9001 and the following Aerospace Approvals; PWA (East Harord & Canada)
Sikorsky, Rolls Royce, Hamilton-Sunstrand, General Dynamics, and GEAE, GE ground turbine. MIL-STDs, ASME, ASTM.
FAA rpa sao g2Ur307Y sal, WA
Qualicaons include NADCAP Accreditaon, NAS 410, AS9100/ISO 9001, FAA, ITAR/EAS along with military approvals and the following
commercial approvals: Air Bus, Bell Helicopter, Boeing, Cessna, Gulf Stream, Lockheed, MD Helicopter .
nADcAP Adao, Hah, OH
Qualicaons include NADCAP Accreditaon, NAS 410, AS9100/ISO 9001 and the following Aerospace Approvals: Air Bus, Beaver, Boeing,
Cessna, Gulf Stream, Hamilton Sundstrand, Lockheed and Rolls Royce.
fed to the system console. Because the boles
vary in size, from 5 to 16 inches in diameter,
the test chamber and xture are designed to
accommodate the enre range, including all
spherical 4DA and 4DS boles. Non-spherical
boles can also be tested using a dierent
xture provided with the system.
The greatest nancial advantage resulng from
ulizing this test procedure is in decreased
bole handling. Aer removal from the aircra,
the Halon bole is recered immediately andreturned to the aircra. Signicant cost savings
are gained from a reducon of inventory and
inventory-related record keeping because
the Halon is not removed from the container.
Depending on the size of the bole, the actual
test procedure takes an average of only 30
minutes.
Auoma Pap rpo gao ad
Dk Fl soa
Report generaon and record keeping is
an important part of any regulated DOT
recercaon test procedure and is subject to
periodic audit. Because the new test procedure
is carried out under computer control, the
test report is automacally printed at theconclusion of the test sequence. Addionally
the raw data is automacally stored fo
archiving mulple test data les.
FOr MOre inFOrMAtiOn:
P 1-609-716-4150
w www...
