This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
AIR CONDITIONING REFRIGERANT CAPACTY QUICK REFERENCE Last Updated 3/31/2015Revision Number
REV 09
REV 09 & REV 10
REV 09
REV 09 & REV 10
REV 09
Always check the label on the compressor for the correct oil typeCompressor Oil Types DescriptionDenso ND8 PAG 46 (Low Viscosity)Sanden SP10 PAG 46 (Low Viscosity)Sanden SP15 PAG 68Sanden SP20 is replaced by SP15 PAG 100 (Medium Viscosity)Ester (POE) POE 100ZXL 100 PG (DH-PS) use Sanden SP20 PAG 100 (Medium Viscosity)Harrison/GM Compressor PAG 150
Typical oil capacity of individual componentsComponent Typical Oil AmountReceiver Drier 15-30 cc (0.5-1.0 ounce)Evaporator 60 cc (2.0 ounce)Condenser 30-60 cc (1.0-2.0 ounce)
Click Link ↓to Go to SpeadsheetAGCO-Allis TractorAGCO Self-Propelled Windrower/Swather AGCO Star Articulated TractorAGCO TractorAllis Chalmers TractorChallenger Articulated and Track TractorChallenger CombineChallenger Self-Propelled Windrower/Swather
Massey Ferguson TractorNew Idea Self-Propelled Windrower/Swather RogatorSpra-CoupeTerra-GatorValtra TractorWhite CombineWhite New Idea UNI CombineWhite TractorWillmar
Compressor Check label or drain and measureHoses too small to measure in hoses
Refrigerant AGCO Part NumberR134a, 12 oz cans 71369762R134a, 30-lb cylinder 79018664
REV. 10Revision Notes/Comments
Added MT700E, MT800E, MT900E Series
Added 700, 800 and 900 Vario S4F
Refrigerant amount revision 7300B, 8300B, 8400B
*DO NOT mix PAG and POE oils*AGCO Part Number
725153077251530772507682
71371465
72515309
REV 09 Added MT500E and MT600E Series, Correction to MT500D Series refrigerant capacity, REV 10 correction to MT600D eff E352034
REV 09 Added MF7700 and 8700 Series models, REV 10 correction to MF8600 eff E352034
AGC0-ALLIS TRACTORSBrand Model Refrigerant Type Refrigerant Capacity
NOTE (1) If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
Sanden SP10 Sanden SD-7H151.7 kg / 3.74 lbs. Sanden SP10 190 cc Sanden SD-7H15
Sanden SP10 190 cc Sanden SD-7H15
Sanden SP10 190 cc Sanden SD-7H15
Sanden SP10 190 cc Sanden SD-7H15
1.0 kg / 2.2 lbs / 36.3 oz Sanden SP10 190 cc Sanden SD-7H15
0.95 kg / 2.0 lbs / 32.0 oz
Sanden SP10
190 cc Sanden SD-7H15
Service bulletin: Wheeled Tractors/Cab, Sheetmetal and AC/11-0165
1.2 kg / 2.64 lbs (1)
1.4 kg / 3.08 lbs / 49.4 oz (1)
1.2 kg / 2.64 lbs (1)
1.2 kg / 2.64 lbs (1)
Notes
OIB stated 1.2 kg / 2.6 lbs.
(1) Original capacity reduced to optimize the performance
(1) Original capacity reduced to optimize the performance(1) Original capacity reduced to optimize the performance(1) Original capacity reduced to optimize the performance
NOTE: The refrigerent amount is reduced if the original condenser is replaced with the condenser that has the built in drier.
ALLIS-CHALMERS TRACTORSBrand Model Refrigerant Type Refrigerant Capacity Oil Type
NOTE (1) If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
NOTE (1) Always check the label on the Sanden compressor body for the recommended oil part number
Click Here to Go Back
Oil Type Oil Capacity Compressor11 fl oz (330 ml) Sanden 487411 fl oz (330 ml) Sanden 487411 fl oz (330 ml) Sanden 487411 fl oz (330 ml) Sanden11 fl oz (330 ml) Sanden13.4 fl oz (396.3 ml)Sanden 487411 oz (330 ml) Sanden11 oz (330 ml) Sanden11 oz (330 ml) Sanden
Always check the label on the Sanden compressor body for the recommended oil part number
Sanden SP20 135 cc49.4 OZ Sanden SP20 Sanden SD-7H15
Sanden SP10 190 cc Sanden SD-7H15
1.35 kg / 2.98 lbs Sanden SP10 190 cc Sanden SD-7H151.0 kg / 2.2 lbs / 36.3 oz Sanden SP10 190 cc Sanden SD-7H15
1.7 kg / 3.74 lbs. Sanden SP10 190 cc Sanden SD-7H15
Sanden SP10 190 cc Sanden SD-7H15
1.35 kg / 2.98 lbs Sanden SP10 190 cc Sanden SD-7H15
1.0 kg / 2.2 lbs / 36.3 oz Sanden SP10 190 cc Sanden SD-7H15
1.25 kg / 2.75 ibs Sanden SP10 190 cc Sanden SD-7H15
1.2 kg / 2.64 lbs Sanden SP10 190 cc Sanden SD-7H15
1.2 kg / 2.64 lbs Sanden SP10 190 cc Sanden SD-7H151.7 kg / 3.74 lbs. Sanden SP10 190 cc Sanden SD-7H15
Sanden SP10 190 cc Sanden SD-7H15
1.0 kg / 2.2 lbs / 36.3 ozSanden SP10
190 cc Sanden SD-7H15
0.95 kg / 2.0 lbs / 32.0 oz
Sanden SP10
190 cc Sanden SD-7H15
1.0 kg / 2.2 lbs / 36.3 ozSanden SP10
190 cc Sanden SD-7H15
0.95 kg / 2.0 lbs Sanden SP10 190 cc Sanden SD-7H15
1.050 kg / 2.31 lbs / 37.0 oz Sanden SP10 190 cc Sanden SD-7H15
1.050 kg / 2.31 lbs / 37.0 oz Sanden SP10 190 cc Sanden SD-7H15
1.4 kg / 3.08 lbs / 49.4 oz Denso ND8 188 cm3/rev Denso
800 grams (28.2 oz) 1.76 lb (2)Sanden SD-7H15 (U 4456)
1.2 kg / 2.64 lbs (1)
1.2 kg / 2.64 lbs (1)
1.4 kg / 3.08 lbs / 49.4 oz (1)
Service bulletin: Wheeled Tractors/Cab, Sheetmetal and AC/11-0165
Service bulletin: Wheeled Tractors/Cab, Sheetmetal and AC 0019
Notes More Information
Early OIB stated 1.2 kg / 2.6 lbs.
(1) Original capacity reduced to optimize the performance
(1) Original capacity reduced to optimize the performance
(1) Original capacity reduced to optimize the performance
NOTE: The refrigerent amount is reduced if the original condenser is replaced with the condenser that has the built in drier.
The desiccant bag is located in the end of the condenser as shown at the right and in the parts catalog. To replace the desiccant, remove the cir-clip and remove the plastic plug.The enhanced 6-circuit, 4-pass evaporator installation has the additional inside recirculation vent located above the operator. Kit ACW1068830 / ACW1070700 / ACW0169900Factory introduction of new condenser and evaporator
DEUTZ-ALLIS TRACTORSBrand Model Refrigerant Type Refrigerant Capacity Oil Type
Deutz-Allis 6260 42 ounces Mineral OilDeutz-Allis 6265 42 ounces Mineral OilDeutz-Allis 6275 42 ounces Mineral OilDeutz-Allis 6260 F/L 35 ounces Mineral OilDeutz-Allis 6275 F/L 35 ounces Mineral OilDeutz-Allis 7085 42 ounces Mineral OilDeutz-Allis 7110 53 ounces Mineral OilDeutz-Allis 7120 53 ounces Mineral OilDeutz-Allis 7145 53 ounces Mineral OilDeutz-Allis 9100 series 45 ounces Mineral Oil
NOTE (1) If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
NOTE (1) If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
NOTE (1) New Denso compressor is supplied with 180 to 200 ccm of oil. When initially assembled at the factory, 100 ccm of oil is poured into the induction port.This quanity must also be pored into the induction port on front of compressor when retrofitting an A/C/ system before first use.
NOTE (2) Normally 60 ccm of this quantity is vacuumed out when servicing and must be replaced. In addition 20 ccm must be added when replacing components.
NOTE (3) Tractor serial number begins with this prefix.
Click Here to Go BackSerial Number Prefix (3) 205, 206, 207, 208, 210, 212, 213, 214, 221, 222, 246, 247, 248, 294, 295, 296, 297, 326, 327, 328, 329
New Denso compressor is supplied with 180 to 200 ccm of oil. When initially assembled at the factory, 100 ccm of oil is poured into the induction port.This quanity must also be pored into the induction port on front of compressor when retrofitting an A/C/ system before first use.
Normally 60 ccm of this quantity is vacuumed out when servicing and must be replaced. In addition 20 ccm must be added when replacing components.
Oil Capacity (1) (2)
Fill to overflow control screw.300 ccm for Denso compressor, for Delco see above
Oil Capacity (1) (2)
Page 1Notes
Page 2Notes
New Denso compressor is supplied with 180 to 200 ccm of oil. When initially assembled at the factory, 100 ccm of oil is poured into the induction port.
Normally 60 ccm of this quantity is vacuumed out when servicing and must be replaced. In addition 20 ccm must be added when replacing components.
NOTE (1) If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
NOTE (2) Always check the label on the Sanden compressor body for the recommended oil part number
5.4 lb (2.45 kg) 500 Viscosity 12 oz Compressor factory charge
5.4 lb (2.45 kg) 500 Viscosity 12 oz Compressor factory charge
4.5 to 4.75 lb (2 to 2.3 kg) Ester 100 12 oz Compressor factory charge
4.5 to 4.75 lb (2 to 2.3 kg) 11 oz (330 ml)4.5 lb (2.04 kg) 11 oz (330 ml)5.5 lb (2.5 kg) 11 oz (330 ml)
4.5 lb (2.04 kg) 11 oz (330 ml)5.5 lb (2.5 kg) 11 oz (330 ml)5.5 lb (2.5 kg) 11 oz (330 ml)5.5 lb (2.5 kg) 11 oz (330 ml)5.5 lb (2.5 kg) 11 oz (330 ml)5.5 lb (2.5 kg) 11 oz (330 ml)5.5 lb (2.5 kg) 11 oz (330 ml)5.5 lb (2.5 kg) 11 oz (330 ml)5.5 lb (2.5 kg) 11 oz (330 ml)
If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
Always check the label on the Sanden compressor body for the recommended oil part number
Sun Oil 4G or Texaco Capella B DualSun Oil 4G or Texaco Capella B DualSun Oil 4G or Texaco Capella B DualSun Oil 4G or Texaco Capella B DualTexaco Capella 768 WF-100Texaco Capella 768 WF-100
NOTE (1) If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
NOTE (2) Always check the label on the Sanden compressor body for the recommended oil part number
NOTE (1) If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
NOTE (2) Always check the label on the Sanden compressor body for the recommended oil part number
NOTE (1) If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
Massey-Ferguson 7700 R134aMassey-Ferguson 8100 8100 Series R134aMassey-Ferguson 8200 8200 Series R134a
Massey-Ferguson 8400 R134a
Massey-Ferguson 8600 R134a
Massey-Ferguson 8600 R134a
Massey-Ferguson 8600 R134a
Massey-Ferguson 8600 R134aMassey-Ferguson 8700 8700 Series R134a
5400 Series High-vis and Steep Nose Roof (except 5450)
5600 Series Standard Roof5600 Series High-vis Roof
6400 Series Standard Roof 6400 Series High-vis and Steep Nose Roof6600 Series Standard Roof6600 Series High-vis
7400 Series Standard Roof 7400 Series High-vis roof and Steep Nose hood7619, 7620, 7622, 7624, 7626 Standard Hood7614, 7615, 7616, 7618 Standard hood
7614, 7615, 7616, 7618 Standard Hood, High Vis Roof7714, 7715, 7716, 7718, 7719, 7720, 7722, 7724, 7726 Standard Hood7714, 7715, 7716, 7718 High-vis Roof and Standard Hood
8400 Series Standard Roof8600 Series w/external drier up to s/n D127078
8600 Series condenser kit only field installed
8600 Series condenser kit + enhanced evaporator kit field installed
MF8600 Series from s/n E352034
If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
Service bulletin: Wheeled Tractors/Cab, Sheetmetal and AC/11-0165
Service bulletin: Wheeled Tractors/Cab, Sheetmetal and AC 0036 dated Spetember 14, 2007
Service bulletin: Wheeled Tractors/Cab, Sheetmetal and AC 0016 dated June 14, 2005
Service bulletin: Wheeled Tractors/Cab, Sheetmetal and AC 0013 dated August 30, 2004
NOTE (1)
NOTE (2)
NOTE (3)
NOTE (4)
NOTE (5)
Refrigerant Capacity Oil Type Oil Capacity Compressor4.0 lb Mineral Oil64 oz. Mineral Oil 11 oz.* A-64.0 lb Mineral Oil64 oz. Mineral Oil 11 oz.* A-664 oz. Mineral Oil 11 oz.* A-6
63.5 oz. Mineral Oil 11 oz.* A-663.5 oz. Mineral Oil 6 oz. SD-510-HD
1.7-1.9 kg Mineral Oil 6 oz. SD-510-HD
2.2 lb Mineral Oil
3.12 lb / 50 oz Mineral Oil Sanden64 oz. Mineral Oil 10 oz.* A-658 oz Mineral Oil
1.7 kg / 3.74 lb /59.8 oz Sanden SP10 175 CC (6.0 oz) Sanden SD-7H151.2 kg / 2.64 lbs / 42.3 oz Sanden SP10 120 ml Sanden SD-7H15
Sanden SP10 190 cc Sanden SD-7H15
950 grams / 2.094 ib/ 33.5 oz (4)950 grams / 2.094 ib/ 33.5 oz (4)
800 grams (28.2 oz) 1.76 lb (3)Sanden SD-7H15 (U 4456)
1.7 kg / 3.74 lb /59.8 oz (5)
1.2 kg / 2.64 lbs / 42.3 oz (2)
Sanden SP10 190 cc Sanden SD-7H151.1 kg / 2.4 lbs Sanden SP10 Sanden SD-7H150.9 kg / 1.98 lbs Sanden SP10 Sanden SD-7H151.05kg / 2.31 lbs Sanden SP10 Sanden SD-7H151.7 kg / 3.74 lbs. Sanden SP20 190 cc Sanden SD-7H151.7 kg / 3.74 lbs. Sanden SP20 190 cc Sanden SD-7H15
Sanden SP10 190 cc Sanden SD-7H15
Sanden SP10 190 cc Sanden SD-7H151.0 kg / 2.2 lbs Sanden SP10 190 cc Sanden SD-7H151.1 kg / 2.4 lbs Sanden SP10 190 cc Sanden SD-7H15
Sanden SP10 190 cc Sanden SD-7H15
Sanden SP10 190 cc Sanden SD-7H15
1.25 kg / 2.75 lbs Sanden SP10 190 cc Sanden SD-7H15
1.0 kg / 2.2 lbs Sanden SP10 190 cc Sanden SD-7H15
1.1 kg / 2.4 lbs Sanden SP10 190 cc Sanden SD-7H15
1.2 kg / 2.64 lbs Sanden SP10 190 cc Sanden SD-7H15
1.35 kg / 2.97 lbs / 47.6 oz (2) Sanden SP10 190 cc Sanden SD-7H151.7 kg / 3.74 lbs. Sanden SP20 190 cc Sanden SD-7H151.7 kg / 3.74 lbs. Sanden SP20 190 cc Sanden SD-7H15
Sanden SP10 190 cc Sanden SD-7H15
1.0 kg / 2.2 lbs Sanden SP10 190 cc Sanden SD-7H15
0.95 kg / 2.0 lbs Sanden SP10 190 cc Sanden SD-7H15
1.050 kg / 2.31 lbs / 37.0 oz Sanden SP10 190 cc Sanden SD-7H15
1.050 kg / 2.31 lbs / 37.0 oz Sanden SP10 190 cc Sanden SD-7H15
1.4 kg / 3.08 lbs / 49.4 oz Denso ND8 188 cm3/rev Denso
1.35 kg / 2.97 lbs / 47.6 oz (2)
1.2 kg / 2.64 lbs / 42.3 oz (2)
1.35 kg / 2.97 lbs / 47.6 oz (2)
1.2 kg / 2.64 lbs / 42.3 oz (2)
1.35 kg / 2.97 lbs / 47.6 oz (2)
1.4 kg / 3.08 lbs / 49.4 oz (2)
If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
Service bulletin: Wheeled Tractors/Cab, Sheetmetal and AC/11-0165
Service bulletin: Wheeled Tractors/Cab, Sheetmetal and AC 0036 dated Spetember 14, 2007
Service bulletin: Wheeled Tractors/Cab, Sheetmetal and AC 0016 dated June 14, 2005
Service bulletin: Wheeled Tractors/Cab, Sheetmetal and AC 0013 dated August 30, 2004
(2) Original capacity reduced to optimize the performance
Standard and Visio roof
Early OIB stated 1.2 kg / 2.6 lbs.
(2) Original capacity reduced to optimize the performance
(2) Original capacity reduced to optimize the performance(2) Original capacity reduced to optimize the performance
(2) Original capacity reduced to optimize the performance(2) Original capacity reduced to optimize the performance
(2) Original capacity reduced to optimize the performance
The desiccant bag is located in the end of the condenser as shown at the right and in the parts catalog. To replace the desiccant, remove the cir-clip and remove the plastic plug.
The enhanced 6-circuit, 4-pass evaporator installation has the additional inside recirculation vent located above the operator. Kit ACW1068830 / ACW1070700 / ACW0169900Factory introduction of new condenser and evaporator
If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
NEW IDEA SELF-PROPELLED WINDROWER / SWATHERSBrand Model Refrigerant Type Refrigerant Capacity Oil Type
New Idea 5850 R134a 4.0 lb (1.8 kg) Sanden SP20New Idea 5840 R134a 4.0 lb (1.8 kg) Sanden SP20New Idea 5830 R134a 4.0 lb (1.8 kg) Sanden SP20New Idea 5830X R134a 4.0 lb (1.8 kg) Sanden SP20
NOTE (1) If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
NOTE (2) Always check the label on the Sanden compressor body for the recommended oil part number
Click Here to Go Back
R12 (1)
Oil Type Oil Capacity Compressor NotesSuniso 5GS 6.76 oz (200 cc) Sankyo SD510HD
6.76 oz (200 cc) Sanden SD5H-14D6.76 oz (200 cc) Sanden SD5H-14D6.76 oz (200 cc) Sanden 4664 SD7-H15HD6.76 oz (200cc) Sanden 4664 SD7-H15HD Model Years 1995 &19966.76 oz (200cc) Sanden 4664 SD7-H15HD Model Years 1997-20026.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4664 SD7-H15HD With Standard Evaporator6.76 oz (200cc) Sanden 4664 SD7-H15HD With Large Evaporator6.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4664 SD7-H15HD With Standard Evaporator6.76 oz (200cc) Sanden 4664 SD7-H15HD With Large Evaporator6.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-60006.76 oz (200cc) Sanden 4872-600010.14 oz (300cc) Sanden 4813-6000 REV 066.76 oz (200cc) Sanden 4872-600110.14 oz (300cc) Sanden 4813-6000 REV 076.76 oz (200cc) Sanden 4872-600210.14 oz (300cc) Sanden 4813-6000 REV 076.76 oz (200cc) Sanden 4872-600310.14 oz (300cc) Sanden 4813-6000 REV 07
If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
Always check the label on the Sanden compressor body for the recommended oil part number
NOTE (1) If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
NOTE (2) Always check the label on the Sanden compressor body for the recommended oil part number
NOTE (1) If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
NOTE (2) Always check the label on the Sanden compressor body for the recommended oil part number
Click Here to Go Back
R12 (1)
Oil Type Oil Capacity Compressor Notes3G Dual Inhibited 3 oz Tecumseh HG 1000
200 cc Sanden SD5H-14D200 cc Sankyo SD510HD200 cc Sankyo SD510HD200 cc Sanden SD5H-14D200 cc Sanden SD5H-14D200 cc Sanden SD5H-14D200 cc Sanden SD5H-14D200 cc Sanden SD5H-14D200 cc Sanden SD5H-14D200 cc Sanden SD5H-14D200 cc Sanden SD5H-14D200 cc Sanden 4698-9931300 cc Sanden 4420-6000200 cc Sanden 4698-9931300 cc Sanden 4872-60003.5 oz Sanden 4434-6000A/R Sanden 4434-6000
300 cc Sanden 4813-6000200 cc Sanden 4698-9931200 cc Sanden 4698-9931300 cc Sanden 4872-6000300 cc Sanden 4872-6000A/R Sanden 4434-6000
300 cc Sanden 4813-60003.5 oz Sanden 4434-6000301 cc Sanden 4872-6001300 cc Sanden 4813-6000200 cc Sanden 4664200 cc Sanden 4664300 cc Sanden 4420-6000300 cc Sanden 4420-6000200 cc Sanden 4420-6000300 cc Sanden 4813-6000
If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
Always check the label on the Sanden compressor body for the recommended oil part number
WHITE COMBINESBrand Model Refrigerant Type Refrigerant Capacity Oil Type
White 2500 5.4 lb (2.45 kg) 500 Viscosity
White 2600 5.4 lb (2.45 kg) 500 Viscosity
White 9700 4.6 lb (2.13 kg) 500 Viscosity
White 9720 4.6 lb (2.13 kg) 500 Viscosity
NOTE (1) If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
Click Here to Go Back
R12 (1)
R12 (1)
R12 (1)
R12 (1)
Oil Capacity Compressor Notes
If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
12 oz Compressor factory charge
York and/or Tecumseh
12 oz Compressor factory charge
York and/or Tecumseh
12 oz Compressor factory charge
York and/or Tecumseh
12 oz Compressor factory charge
York and/or Tecumseh
WHITE NEW IDEA UNI COMBINESBrand Model Refrigerant Type Refrigerant CapacityWNI 708 UNI 2.5 LbsWNI 709 UNI 2.5 LbsWNI 800 UNI 2.5 LbsWNI 801 UNI 2.5 LbsWNI 802 UNI 2.5 LbsWNI 803A UNI 2.5 LbsWNI 800C UNI 2.5 LbsWNI 802C UNI 2.5 LbsWNI 803C UNI 2.5 Lbs
WNI 800C UNI R134a 2.5 Lbs
WNI 803C UNI R134a 2.5 Lbs
NOTE (1) If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
Notes
If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
1994 & later units have R134a.S/N with R134a; 99768, 99771 - 99775, 99782, 99797, 99798, 99801,99802, 100004 - 100023 1994 & later units have R134a.S/N with R134a; 99768, 99771 - 99775, 99782, 99797, 99798, 99801,99802, 100004 - 100023
NOTE (1) If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
NOTE (1) Early models used the Seltec 488-44120 compressor with a v-belt NOTE (1) Later models used the Zexel compressor w/serpentine belt. No S/N break available
NOTE (2) PAG Oil - Check the label on the compressor for the correct viscosity
NOTE (3)
Click Here to Go Back
R12 (3)
R12 (3)
R12 (3)
If the original R12 refrigerant has been removed and the system retrofitted to R134a, the recommended R134a capacity is 80% of the R12 amount.
Oil Capacity Compressor Notes6.0 oz SELTEC 488-25011(AGCO P/N 26434) 130cc compressor6.0 oz ZEXEL/Perrin 906 (AGCO P/N WR28164) 130cc compressor6.0 oz SELTEC 488-25011(AGCO P/N 26434) 130cc compressor6.0 oz ZEXEL/Perrin 906 (AGCO P/N WR28164) 130cc compressor6.0 oz SELTEC 488-25011(AGCO P/N 26434) 130cc compressor