Re-Design Air condition remote controller Neo Hsieh 14年730星期三
Re-Design Air condition remote controller
Neo Hsieh
14年7⽉月30⽇日星期三
Table of Contents
1 Table of Contents 1
2 Version History 2
3 Gesture Definition 3
4 Function Specification 4
5 Mockup 5
6 User Stories 8
7 Start or Off the Air Condition 9
8 Adjust the air condition temperature 10
9 Open the cover to setup other functions 11
14年7⽉月30⽇日星期三
Version History
Version Date Author Comments
1.0 2014/07/30 Neo Hsieh Initial version
14年7⽉月30⽇日星期三
Gestures Definition
Tap Drag up/down
14年7⽉月30⽇日星期三
Function Specification 1
2
34 5
6 7
8 9 10
11
12
13
14 15 16
17 18 19
No. Function
1 Signal LED, On= Running, Flash= Fan
2 LCD, For temperature or timer
3 Air speed (High, Middle, Low)
4 Dehumidify icon
5 Fuzzy Icon
6 Sleep mode
7 Timer
8 Air conditioned icon
9 Ionized air icon
10 Air filter needs to be cleaned icon
11 Power button (On = LED on, Off = LED off)
12 Temperature up and down slide cover
13 Air speed (fuzzy, turbo, strong, low)
14 Oscillate air button
15 Timer button
16 Sleep mode button
17 Filter reset button
18 AC / Dehumidify / Fan switch button
19 Ionized air button
14年7⽉月30⽇日星期三
Mockup Standard mode
14年7⽉月30⽇日星期三
Mockup - Easy to control
14年7⽉月30⽇日星期三
Mockup - Open the cover
14年7⽉月30⽇日星期三
User Stories
1. As a user, I want to easily start the air condition even in dark environments. 2. As a user, I want to easily adjust the temperature even in dark environments.3. As a user, I need to know the environment temperature after I setup the air condition temperature.4.As a user, I need to know the information in remote controller.5. As a user, If I want to setup the timer, air speed, sleep mode or reset air filter warning..., I can see the signal and feedback.
14年7⽉月30⽇日星期三
Start / Off the Air Condition
When users want turn on the air condition, tap the power button to start the air condition.
Users can turn off the air condition by tapping the power button again.
When users turn on the air condition, the power button backlight LED will auto turn on and got beep sound. So users can get the feedback from power button itself.
14年7⽉月30⽇日星期三
Adjust the Air Condition temperature
Users can directly drag the cover up or down to adjust air condition temperature up or down. So even in dark environments, users still can adjust temperature quickly and easily.
When users drag the cover up or down, they can hear the beep sound from the remote controller.
The default temperature setting is 24 degree.
14年7⽉月30⽇日星期三
Open the cover to setup other functions
When users need to setup other functions, the first step is open the cover and then users can see the 7 buttons on there.
When users press the button, the feedback will be shown there.
14年7⽉月30⽇日星期三
About this DesignAffordance. My design is according to this basic design theory.
The power and temperature adjustment are the most important functions in air condition remote controller. So I need them to be the quite obvious function on the remote controller.In standard mode (covered) the only one button is “Power” key. So any user can turn on/off the air condition in any environment. The slidable cover can adjust temperature by following user’s instincts.
14年7⽉月30⽇日星期三