This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),Class B Digital Device
DECLARATION OF CONFORMITYPer FCC Part 2 Section 2.1077(a)
Responsible Party Name:
Address:
Phone/Fax No:hereby declares that the product
Product Name:
Conforms to the following specifications:
This device complies with part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) This device may notcause harmful and (2) this device must accept any inference received,including that may cause undesired operation.
Representative Person’s Name:
Signature: Eric Lu
Supplementary Information:
Model Number:
17358 Railroad StreetCity of Industry, CA 91748
G.B.T. INC. (U.S.A.)
(818) 854-9338/ (818) 854-9339
MotherboardGA-8IEML-T
Date:
ERIC LU
May 20,2002
Declaration of ConformityWe, Manufacturer/Importer
(full address)G.B.T. Technology Träding GMbH
Ausschlager Weg 41, 1F, 20537 Hamburg, Germany
declare that the product( description of the apparatus, system, installation to which it refers)
Mother BoardGA-8IEML-T
is in conformity with(reference to the specification under which conformity is declared)
in accordance with 89/336 EEC-EMC Directive
EN 55011 Limits and methods of measurementof radio disturbance characteristics ofindustrial,scientific and medical (ISMhigh frequency equipment
EN 61000-3-2* EN 60555-2
Disturbances in supply systems causeby household appliances and similarelectrical equipment armonics”
EN 55013 Limits and methods of measurementof radio disturbance characteristics ofbroadcast receivers and associatedequipment
EN 61000-3-3* Disturbances in supply systems causeby household appliances and similarelectrical equipment “Voltage fluctuations”
EN 55014 Limits and methods of measurementof radio disturbance characteristics ofhousehold electrical appliances,portable tools and similar electricalapparatus
EN 50081-1 Generic emission standard Part 1:Residual commercial and light industry
EN 50082-1 Generic immunity standard Part 1:Residual commercial and light industry
EN 55015 Limits and methods of measurementof radio disturbance characteristics offluorescent lamps and luminaries
Generic emission standard Part 2:Industrial environment
EN 55081-2
Immunity from radio interference ofbroadcast receivers and associatedequipment
Generic emission standard Part 2:Industrial environment
EN 55082-2
EN 55022 Limits and methods of measurementof radio disturbance characteristics ofinformation technology equipment
lmmunity requirements for householdappliances tools and similar apparatus
ENV 55104
Cabled distribution systems; Equipment
for receiving and/or distribution from
sound and television signals
EMC requirements for uninterruptiblepower systems (UPS)
EN50091-2
EN 55020
DIN VDE 0855 part 10 part 12
(EC conformity marking) CE marking
The manufacturer also declares the conformity of above mentioned productwith the actual required safety standards in accordance with LVD 73/23 EEC
Safety requirements for mains operatedelectronic and related apparatus forhousehold and similar general use
EN 60950 EN 60065
Safety of household and similarelectrical appliances
IDE Primary Master (Slave) / IDE Secondary Master (Slave) ( / )
IDE1 IDE 2CMOS
1 User TYPE CYLS HEADS SECTORSMODE
2 AUTO TYPE MODE AUTO BIOS POSTIDE
CYLS. Number of cylinders( ).HEADS Number of heads( ).PRECOMP Write precomp.LANDZONE Landing zone.SECTORS Number of sectors( ).
"NONE" <Enter>
Drive A / Drive B ( A:/ B: )
None360K, 5.25 in. 5.25 360KB1.2M, 5.25 in. 5.25 1.2MB720K, 3.5 in. 3 720KB1.44M, 3.5 in. 3 1.44MB2.88M, 3.5 in. 3 2.88MB
GA-8IEML-T
2 8
Floppy 3 Mode Support ( 3 Mode )Disabled 3 ModeDrive A A: 3 ModeDrive B B: 3 ModeBoth A: B: 3 Mode
Halt on( )POST
NO ErrorsAll ErrorsAll, But KeyboardAll, But DisketteAll, But Disk/Key
Memory( )BIOS POST(Power On Self Test)
STANDARD CMOS SETUPBase Memory
PC 640KB MS-DOSExtended Memory
Base OtherMemory Module
BIOS
2 9
BIOS
3: BIOS
First / Second / Third Boot Device ( / / )FloppyLS120 LS120HDD-0~3SCSI SCSICDROMZIP ZIPUSB-FDD USB-FDDUSB-ZIP USB-ZIPUSB-CDROM USB-CDROM
CMOS Setup Utility-Copyright (C) 1984-2002 Award SoftwareAdvanced BIOS Features
First Boot Device Floppy Item Help
Second Boot Device HDD-0 Menu Level Third Boot Device CDROM Select Boot DeviceBoot Up Floppy Seek Disabled priorityDRAM Data Integrity Mode Non-ECCInit Display First AGP [Floppy]
DRAM Data Integrity ModeECC DRAM Data Integrity Mode by ECCNon-ECC DRAM Data Integrity Mode by Non-ECC ( )
Init Display FirstAGP AGP ( )PCI PCI
BIOS
3 1
4 :
"*" GA-8IEML-T
CMOS Setup Utility-Copyright (C) 1984-2002 Award SoftwareIntegrated Peripherals
On-Chip Primary PCI IDE Enabled Item HelpOn-Chip Secondary PCI IDE Enabled Menu Level IDE1 Conductor Cable Auto If a hard diskIDE2 Conductor Cable Auto controller card is
USB Controller Enabled used, set at DisabledUSB Keyboard Support DisabledUSB Mouse Support Disabled [Enabled]AC97 Audio Auto Enable onboard IDEOnboard H/W LAN Enabled* PORTOnboard LAN Boot ROM Disabled*Onboard Serial Port 1 3F8/IRQ4 [Disabled]Onboard Serial Port 2 2F8/IRQ3 Disable onboard IDEUART Mode Select Normal PORTx RxD, TxD Active Hi, Lox IR Transmission Delay Enabledx UR2 Duplex Mode Halfx Use IR Pins IR-Rx2Tx2Onboard Parallel Port 378/IRQ7Parallel Port Mode SPPx EPP Mode Select EPP1.7x ECP Mode Use DMA 3Game Port Address 201Midi Port Address 330Midi Port IRQ 10 : Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
GA-8IEML-T
3 2
On-Chip Primary IDE ( channel PCI IDE )
Enabled channel IDE ( )Disabled
On-Chip Secondary IDE ( channel IDE )Secondary IDE
Enabled channel PCI IDE ( )Disabled
IDE1 Conductor CableAuto ( )ATA66/100 IDE1 ATA66/100 ( IDE
ATA66/100 )ATA33 IDE1 ATA33 ( IDE
ATA33 )
IDE2 Conductor CableAuto ( )ATA66/100 IDE2 ATA66/100 ( IDE
ATA66/100 )ATA33 IDE2 ATA33 ( IDE
ATA33 )
USB ControllerEnabled USB Controller ( )Disabled USB Controller
USB Keyboard Support ( USB )Enabled USB ( USB Device
USB Enabled)Disabled USB ( )
BIOS
3 3
USB Mouse Support ( USB )Enabled USB ( USB Device
USB Enabled)Disabled USB ( )
AC97 AudioAuto AC97 Audio ( )Disabled AC97 Audio
Onboard H/W LAN ( LAN)*Enabled onboard H/W LAN ( )Disabled onboard H/W LAN
Onboard LAN Boot ROM*Enabled onboard LAN Boot ROMDisabled onboard LAN Boot ROM ( )
Onboard Serial Port 1 1Auto BIOS3F8/IRQ4 1 COM 1 3F8 ( )2F8/IRQ3 1 COM 2 2F83E8/IRQ4 1 COM 3 3E82E8/IRQ3 1 COM 4 2E8Disabled 1
Onboard Serial Port 2 2Auto BIOS3F8/IRQ4 2 COM 1 3F82F8/IRQ3 2 COM 2 2F8 ( )3E8/IRQ4 2 COM 3 3E82E8/IRQ3 2 COM 4 2E8
ECP Mode Use DMA3 ECP Mode use DMA 3 ( )1 ECP Mode use DMA 1
Game Port Address201 Game Port Address 201 ( )209 Game Port Address 209Disabled
Midi Port Address290 Midi Port Address 290300 Midi Port Address 300330 Midi Port Address 330 ( )Disabled
Midi Port IRQ5 Midi Port IRQ 510 Midi Port IRQ 10 ( )
GA-8IEML-T
3 6
5 :
ACPI Suspend TypeS1(POS) ACPI Suspend type S1 ( )S3(STR) ACPI Suspend type S3
Power LED in S1 stateBlinking Power LED S1 ( )Dual/Off power
LED LED power LEDLED
CMOS Setup Utility-Copyright (C) 1984-2002 Award SoftwarePower Management Setup
ACPI Suspend Type S1(POS) Item HelpPower LED in S1 state Blinking Menu Level Soft-Off by PWR_BTTN Instant-Off [S1]PME Event Wake Up Enabled Set suspend type toModemRingOn Enabled Power On Suspend underResume by Alarm Disabled ACPI OSx Date (of Month) Alarm Everydayx Time (hh:nn:ss) 0 0 0 [S3]Mouse Power On Disabled Set suspend type toKeyboard Power On Disabled Suspend to RAM underx KB Power ON Password Enter ACPI OSAC Back Function Soft Off
, " Case Opened" "YES". "Case Opened" , "Reset Case Open Status"
"Enable" Current Voltage (v) VCORE /+3.3V /+5V /+12V
CMOS Setup Utility-Copyright (C) 1984-2002 Award SoftwarePC Health Status
Reset Case Open Status Disabled Item HelpCase Opened No Menu Level VCORE 1.730V [Disabled]+3.3V 3.360V Don’t reset case+5V 5.053V open status+12V 11.840VCurrent System Temperature 28°C/82°F [Enabled]Current CPU Temperature 35°C/95°F Clear case openCurrent CPU FAN Speed 6490 RPM status at next bootCurrent SYSTEM FAN Speed 0 RPMCPU Warning Temperature DisabledCPU FAN Fail Warning DisabledSYSTEM FAN Fail Warning Disabled
CPU Warning Temperature60 oC / 140 oF CPU 60 oC / 140 oF70 oC / 158 oF CPU 70 oC / 158 oF80 oC / 176 oF CPU 80 oC / 176 oF90 oC / 194 oF CPU 90 oC / 194 oFDisabled ( )
CPU FAN Fail Warning (CPU )Enabled CPUDisabled CPU ( )
SYSEM FAN Fail Warning (SYSTEM )Enabled SYSTEMDisabled SYSTEM ( )
GA-8IEML-T
4 2
/
8 : /
CPU Clock RatioCPU
10X~24X CPU
CPU Host Clock Control
20
Disabled CPU Host Clock ( )Enabled CPU Host Clock
CPU Host Frequency100MHz ~ 355MHz CPU Host Clock 100MHz 355MHz
CMOS Setup Utility-Copyright (C) 1984-2002 Award SoftwareFrequency/Voltage Control
CPU Clock Ratio 10X Item HelpCPU Host Clock Control Disabled Menu Level x CPU Host Frequency (Mhz) 100x PCI/AGP Divider DisabledHost/DRAM Clock ratio AutoMemory Frequency (Mhz) 266PCI/AGP Frequency (Mhz) 33/66
A:\> dir/w Volume in drive A has no labelVolume Serial Number is 16EB-353DDirectory of A:\COMMAND.COM 7VTX.F4 FLASH841.EXE 3 file(s) 838,954 bytes 0 dir(s) 324,608 bytes free
A:\> Flash841 7VTX.F4
GA-8IEML-T
7 2
(3) BIOS [Enter][Esc]
BIOS BIOS
(4) BIOS [ESC]
Are you sure to flash the BIOS?[Enter] to continue Or [Esc] to cancel?