Advances in Chemical Engineering and Science · 2013. 12. 19. · Advances in Chemical Engineering and Science (ACES) Journal Information SUBSCRIPTIONS The Advances in Chemical Engineering

Advances in Chemical Engineering and Science, 2013, 3, 207-303 Published Online October 2013 in SciRes (http://www.scirp.org/journal/aces/)

TABLE OF CONTENTS

Volume 3 Number 4 October 2013 Interaction of Bubbles with Vortex Ring Launched into Bubble Plume

T. Uchiyama, S. Kusamichi………………………………………...………………………………………………………………207

Physical Modeling of the Enzymatic Glucose-Fuelled Fuel Cells

V. (Z.) Rubin, L. Mor………………………………………………………………………………………………………………218

Evaluation of Methane Yield on Mesophilic-Dry Anaerobic Digestion of Piggery Manure Mixed with Chaff for Agricultural Area

D.-H. Kwak, M.-S. Kim, J.-S. Kim, Y.-Y. Oh, S.-O. Noh, B.-O. So, S.-Y. Jung, S.-J. Jung, S.-W. Chae…………………...……227

Coating of Medical-Grade PVC Material with ZnO for Antibacterial Application

H. X. Lin, L. Y. Ding, W. H. Deng, X. X. Wang, J. L. Long, Q. Lin…………………………...…………………………………236

Pre-Treatment of High Free Fatty Acids Oils by Chemical Re-Esterification for Biodiesel Production—A Review

G. G. Kombe, A. K. Temu, H. M. Rajabu, G. D. Mrema, J. Kansedo, K. T. Lee…………………………….……………………242

Low Temperature Glycerolysis as a High FFA Pre-Treatment Method for Biodiesel Production

G. G. Kombe, A. K. Temu, H. M. Rajabu, G. D. Mrema, K. T. Lee……………….………………………………………………248

Correlation and Prediction of the Solubility of Solid Solutes in Chemically Diverse Supercritical Fluids Based on the Expanded Liquid Theory

L. Nasri, S. Bensaad, Z. Bensetiti…………………………………………………..………………………………………………255

The Mechanical Properties of the System and Training Zr59Nb5Cu18Ni8AL10 Bulk Metallic Glasses

N.-E. Chakri, B. Bendjemil, M. Baricco……………………………………………………………………………………………274

Biological Template Based on ent-Kaurane Diterpenoid Glycosides for the Synthesis of Inorganic Porous Materials

Á. B. Sifontes, M. Rodriguez, D. Freire, W. Rondón, L. Llovera, E. Cañizales, F. J. Méndez, A. Monaco, Y. Díaz…………..…278

Process Optimization of Effective Partition Constant in Progressive Freeze Concentration of Wastewater

M. Jusoh, A. Johari, N. Ngadi, Z. Y. Zakaria………………………………………………………………………………………286

Modeling a General Equation for Pool Boiling Heat Transfer

M. S. Hameed, A. R. Khan, A. A. Mahdi………………………………………....………………………………………………294

Copyright © 2013 SciRes. ACES

Advances in Chemical Engineering and Science (ACES)

Journal Information

SUBSCRIPTIONS

The Advances in Chemical Engineering and Science (Online at Scientific Research Publishing, www.SciRP.org) is published

quarterly by Scientific Research Publishing, Inc., USA.

Subscription rates: Print: $59 per issue.

To subscribe, please contact Journals Subscriptions Department, E-mail: [email protected]

SERVICES

Advertisements

Advertisement Sales Department, E-mail: [email protected]

Reprints (minimum quantity 100 copies)

Reprints Co-ordinator, Scientific Research Publishing, Inc., USA.

E-mail: [email protected]

COPYRIGHT

Copyright©2013 Scientific Research Publishing, Inc.

All Rights Reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by

any means, electronic, mechanical, photocopying, recording, scanning or otherwise, except as described below, without the

permission in writing of the Publisher.

Copying of articles is not permitted except for personal and internal use, to the extent permitted by national copyright law, or under

the terms of a license issued by the national Reproduction Rights Organization.

Requests for permission for other kinds of copying, such as copying for general distribution, for advertising or promotional purposes,

for creating new collective works or for resale, and other enquiries should be addressed to the Publisher.

Statements and opinions expressed in the articles and communications are those of the individual contributors and not the statements

and opinion of Scientific Research Publishing, Inc. We assumes no responsibility or liability for any damage or injury to persons or

property arising out of the use of any materials, instructions, methods or ideas contained herein. We expressly disclaim any implied

warranties of merchantability or fitness for a particular purpose. If expert assistance is required, the services of a competent

professional person should be sought.

PRODUCTION INFORMATION

For manuscripts that have been accepted for publication, please contact:

E-mail: [email protected]