Advanced Surgical kit wall chart ®
Mar 10, 2016
Advanced Surgical kitwall chart
Advanced Surgical kitContent:
1
MP-GW001 Rev. 4
MT-LMK13Long motor key adapter 0.05”
Advanced Surgical kit with external irrigation drills includes:
Option 1 (MK-EI35)
Option 2 (MK-IR35)
Option 3 (MK-0035)
Advanced Surgical kit with internal irrigation drills includes:
Advanced Surgical kit supplied without drills.
Marking drill 1.90mm external irrigationMT-TDN19
Pilot drill 2mm external irrigationMT-TDN20
Twist drill 2.80mm external irrigationMT-TDN28
Twist drill 3.20mm external irrigationMT-TDN32
Twist drill 3.80mm external irrigationMT-TDN38
Twist drill 4.50mm external irrigationMT-TDN45
Twist drill 5mm external irrigationMT-TDN50
Twist drill 5.50mm external irrigationMT-TDN55
Marking drill 1.90mmMT-TD110
Pilot drill 2mmMT-TD200
Twist drill 2.80mmMT-TD280
Twist drill 3.20mmMT-TD320
Twist drill 3.80mmMT-TD380Twist drill 4.50mmMT-TD450
Twist drill 5mmMT-TD500
Twist drill 5.50mmMT-TD550
MT-BT032Body try in 3.20mm
MT-BT045Body try in 4.50mm
MT-BT050Body try in 5mm
MT-BT055Body try in 5.50mm
MT-SMK136
Short motor key adapter 0.05”
2
MT-DE001Drill extender
MT-RI030Ratchet wrench
11
MT-HHK24Hand key for int. hex. connection
Countersink for wide platform implant system
MT-GDN50
10
Countersink for standard platform implant system
MT-GDN33
MT-BT020Body try in 2mm
MT-BT028Body try in 2.80mm
MT-BT038Body try in 3.80mm
3
MT-PP001Parallel pin
5
MT-HHR07Short hand screwdriver for 0.05” hex.
MT-HHR13Long hand screwdriver for 0.05” hex.
MT-HW001Hand wrench
7
MT-MMH10Short motor adapter for int. hex. connection
9
MT-MMH20Long motor adapter for int. hex. connection
®
4
MT-DI001Implant Direction Indicator
MT-HMR10Long direct hand and ratchet hex. key
12
1
2
3
4
12
5
6
7
8
9
10
11
MT-MRH20Hex. ratchet long adapter for int. hex. connection
MT-MRH10Hex. ratchet short adapter for int. hex. connection
8
© MIS Corporation. All Rights Reserved.
MIS Implants Technologies Ltd. www.mis-implants.com
®
MIS’s Quality System complies with international quality standards: ISO 13485:2003 - Quality Management System for Medical Devices, ISO 9001: 2008 – Quality Management System and CE Directive for Medical Devices 93/42/EEC. MIS’s products are cleared for marketing in the USA and CE approved.
MT-HHK24
Hand wrench
MT-MMH10
Procedures Procedures
SEVEN Implant
BIOCOM Implant
3.75mm Implant Procedure
®
Batch Code
Catalogue Number
Non sterile
Key to code used:
The devices must be sterilized before use by autoclave, at a temperature of 134ºC (273ºF) at a pressure of ~315 Kpa during 6 minutes.
Manufacturer
0483MIS Implants Technologies GmbHPaulinenstr. 12A, 32427 Minden, GermanyTel: +49 571-972-7690Email: [email protected]
EC REP
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 20156, ISRAELWebsite: www.mis-implants.com
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80 Ø2.80
200-500
Ø3.30
15-25
Ø3.30
Drill Speed (RPM)
Diameter
(MT-GDN33)Countersink
(MT-GDN33)Countersink
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
200-500
Ø3.75
15-25
Ø3.75Ø3.20
Drill Speed (RPM)
Diameter
(MT-GDN33)Countersink
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
400-600
Ø3.80
200-500
Ø4.20Ø3.80
15-20
Ø4.20
Countersink
4.20mm Implant Procedure 3.30mm Implant Procedure
5mm Implant Procedure
(MT-GDN50)Countersink
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
400-600
Ø3.80
15-25
Ø5Ø4.50
400-600
Ø4.50
200-500
Ø5
6mm Implant Procedure 3.75mm Implant Procedure 5mm Implant Procedure
4.20mm Implant Procedure 6mm Implant Procedure
Drill Speed (RPM)
Diameter
(MT-GDN50)Countersink
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
Ø4.50
300-500
Ø5
300-500
Ø5.50 Ø5.50
200-500
Ø6
15-25
Ø6
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
15-25
Ø3.75
300-500
Ø2.80Ø3.60
Ø2.80 Ø3.60
200-400
For bonetype 1&2
For bonetype 3&4
Final drill
OR
(MT-GDN33)Countersink
For bonetype 1&2
For bonetype 3&4
Final drill
OR
(MT-GDN50)Countersink
Drill Speed (RPM)
Drill Speed (RPM)
Diameter
Diameter
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80 Ø3.20
400-700
Ø3.30 Ø4.10
200-400
Ø4.20
200-500
Ø4.20
15-25
For bonetype 1&2
For bonetype 3&4
Final drill
OR
(MT-GDN33)Countersink
Ø4.10 Ø 4.90
200-400
Ø5
200-500
Ø5
15-25
Ø3.80
400-600
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
Ø4.50
300-500
Ø5
200-500
Ø6 Ø6
15-25200-400
Ø 5.10Ø5.90
For bonetype 1&2
For bonetype 3&4
Final drill
OR
(MT-GDN50)Countersink
Procedure recommended by MIS cannot replace the judgment and the experience of the surgeon Procedure recommended by MIS cannot replace the judgment and the experience of the surgeon
Procedures Procedures
SEVEN Implant
BIOCOM Implant
3.75mm Implant Procedure
®
Batch Code
Catalogue Number
Non sterile
Key to code used:
The devices must be sterilized before use by autoclave, at a temperature of 134ºC (273ºF) at a pressure of ~315 Kpa during 6 minutes.
Manufacturer
0483MIS Implants Technologies GmbHPaulinenstr. 12A, 32427 Minden, GermanyTel: +49 571-972-7690Email: [email protected]
EC REP
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 20156, ISRAELWebsite: www.mis-implants.com
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80 Ø2.80
200-500
Ø3.30
15-25
Ø3.30
Drill Speed (RPM)
Diameter
(MT-GDN33)Countersink
(MT-GDN33)Countersink
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
200-500
Ø3.75
15-25
Ø3.75Ø3.20
Drill Speed (RPM)
Diameter
(MT-GDN33)Countersink
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
400-600
Ø3.80
200-500
Ø4.20Ø3.80
15-20
Ø4.20
4.20mm Implant Procedure 3.30mm Implant Procedure
5mm Implant Procedure
(MT-GDN50)Countersink
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
400-600
Ø3.80
15-25
Ø5Ø4.50
400-600
Ø4.50
200-500
Ø5
6mm Implant Procedure 3.75mm Implant Procedure 5mm Implant Procedure
4.20mm Implant Procedure 6mm Implant Procedure
Drill Speed (RPM)
Diameter
(MT-GDN50)Countersink
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
Ø4.50
300-500
Ø5
300-500
Ø5.50 Ø5.50
200-500
Ø6
15-25
Ø6
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
15-25
Ø3.75
300-500
Ø2.80Ø3.60
Ø2.80 Ø3.60
200-400
For bonetype 1&2
For bonetype 3&4
Final drill
OR
(MT-GDN33)Countersink
For bonetype 1&2
For bonetype 3&4
Final drill
OR
(MT-GDN50)Countersink
Drill Speed (RPM)
Drill Speed (RPM)
Diameter
Diameter
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80 Ø3.20
400-700
Ø3.30 Ø4.10
200-400
Ø4.20
200-500
Ø4.20
15-25
For bonetype 1&2
For bonetype 3&4
Final drill
OR
(MT-GDN33)Countersink
Ø4.10 Ø 4.90
200-400
Ø5
200-500
Ø5
15-25
Ø3.80
400-600
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
Ø4.50
300-500
Ø5
200-500
Ø6 Ø6
15-25200-400
Ø 5.10Ø5.90
For bonetype 1&2
For bonetype 3&4
Final drill
OR
(MT-GDN50)Countersink
Procedure recommended by MIS cannot replace the judgment and the experience of the surgeon Procedure recommended by MIS cannot replace the judgment and the experience of the surgeon
Procedures Procedures
SEVEN Implant
BIOCOM Implant
3.75mm Implant Procedure
®
Batch Code
Catalogue Number
Non sterile
Key to code used:
The devices must be sterilized before use by autoclave, at a temperature of 134ºC (273ºF) at a pressure of ~315 Kpa during 6 minutes.
Manufacturer
0483MIS Implants Technologies GmbHPaulinenstr. 12A, 32427 Minden, GermanyTel: +49 571-972-7690Email: [email protected]
EC REP
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 20156, ISRAELWebsite: www.mis-implants.com
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80 Ø2.80
200-500
Ø3.30
15-25
Ø3.30
Drill Speed (RPM)
Diameter
(MT-GDN33)Countersink
(MT-GDN33)Countersink
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
200-500
Ø3.75
15-25
Ø3.75Ø3.20
Drill Speed (RPM)
Diameter
(MT-GDN33)Countersink
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
400-600
Ø3.80
200-500
Ø4.20Ø3.80
15-20
Ø4.20
4.20mm Implant Procedure 3.30mm Implant Procedure
5mm Implant Procedure
(MT-GDN50)Countersink
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
400-600
Ø3.80
15-25
Ø5Ø4.50
400-600
Ø4.50
200-500
Ø5
6mm Implant Procedure 3.75mm Implant Procedure 5mm Implant Procedure
4.20mm Implant Procedure 6mm Implant Procedure
Drill Speed (RPM)
Diameter
(MT-GDN50)Countersink
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
Ø4.50
300-500
Ø5
300-500
Ø5.50 Ø5.50
200-500
Ø6
15-25
Ø6
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
15-25
Ø3.75
300-500
Ø2.80Ø3.60
Ø2.80 Ø3.60
200-400
For bonetype 1&2
For bonetype 3&4
Final drill
OR
(MT-GDN33)Countersink
For bonetype 1&2
For bonetype 3&4
Final drill
OR
(MT-GDN50)Countersink
Drill Speed (RPM)
Drill Speed (RPM)
Diameter
Diameter
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80 Ø3.20
400-700
Ø3.30 Ø4.10
200-400
Ø4.20
200-500
Ø4.20
15-25
For bonetype 1&2
For bonetype 3&4
Final drill
OR
(MT-GDN33)Countersink
For bonetype 1&2
For bonetype 3&4
OR
Final drill(MT-GDN50)Countersink
Ø4.10 Ø 4.90
200-400
Ø5
200-500
Ø5
15-25
Ø3.80
400-600
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
Ø4.50
300-500
Ø5
200-500
Ø6 Ø6
15-25200-400
Ø 5.10Ø5.90Ø5.90
For bonetype 1&2
For bonetype 3&4
Final drill
OR
(MT-GDN50)Countersink
Procedure recommended by MIS cannot replace the judgment and the experience of the surgeon Procedure recommended by MIS cannot replace the judgment and the experience of the surgeon
Procedures Procedures
SEVEN Implant
BIOCOM Implant
3.75mm Implant Procedure
®
Batch Code
Catalogue Number
Non sterile
Key to code used:
The devices must be sterilized before use by autoclave, at a temperature of 134ºC (273ºF) at a pressure of ~315 Kpa during 6 minutes.
Manufacturer
0483MIS Implants Technologies GmbHPaulinenstr. 12A, 32427 Minden, GermanyTel: +49 571-972-7690Email: [email protected]
EC REP
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 20156, ISRAELWebsite: www.mis-implants.com
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80 Ø2.80
200-500
Ø3.30
15-25
Ø3.30
Drill Speed (RPM)
Diameter
(MT-GDN33)Countersink
(MT-GDN33)Countersink
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
200-500
Ø3.75
15-25
Ø3.75Ø3.20
Drill Speed (RPM)
Diameter
(MT-GDN33)Countersink
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
400-600
Ø3.80
200-500
Ø4.20Ø3.80
15-20
Ø4.20
4.20mm Implant Procedure 3.30mm Implant Procedure
5mm Implant Procedure
(MT-GDN50)Countersink
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
400-600
Ø3.80
15-25
Ø5Ø4.50
400-600
Ø4.50
200-500
Ø5
6mm Implant Procedure 3.75mm Implant Procedure 5mm Implant Procedure
4.20mm Implant Procedure 6mm Implant Procedure
Drill Speed (RPM)
Diameter
(MT-GDN50)Countersink
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
Ø4.50
300-500
Ø5
300-500
Ø5.50 Ø5.50
200-500
Ø6
15-25
Ø6
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
15-25
Ø3.75
300-500
Ø2.80Ø3.60
Ø2.80 Ø3.60
200-400
For bonetype 1&2
For bonetype 3&4
Final drill
OR
(MT-GDN33)Countersink
For bonetype 1&2
For bonetype 3&4
Final drill
OR
(MT-GDN50)Countersink
Drill Speed (RPM)
Drill Speed (RPM)
Diameter
Diameter
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80 Ø3.20
400-700
Ø3.30 Ø4.10
200-400
Ø4.20
200-500
Ø4.20
15-25
For bonetype 1&2
For bonetype 3&4
Final drill
OR
(MT-GDN33)Countersink
Ø4.10 Ø 4.90
200-400
Ø5
200-500
Ø5
15-25
Ø3.80
400-600
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
1200-1500
Ø1.90
900-1200
Ø2 Ø2
500-700
Ø2.80
400-700
Ø3.20
400-600
Ø3.80
400-600
Ø4.50
300-500
Ø5
200-500
Ø6 Ø6
15-25200-400
Ø 5.10Ø5.90
For bonetype 1&2
For bonetype 3&4
Final drill
OR
(MT-GDN50)Countersink
Procedure recommended by MIS cannot replace the judgment and the experience of the surgeon Procedure recommended by MIS cannot replace the judgment and the experience of the surgeon
Advanced Surgical kitwall chart
Advanced Surgical kitContent:
1
MP-GW001 Rev. 4
MT-LMK13Long motor key adapter 0.05”
Advanced Surgical kit with external irrigation drills includes:
Option 1 (MK-EI35)
Option 2 (MK-IR35)
Option 3 (MK-0035)
Advanced Surgical kit with internal irrigation drills includes:
Advanced Surgical kit supplied without drills.
Marking drill 1.90mm external irrigationMT-TDN19
Pilot drill 2mm external irrigationMT-TDN20
Twist drill 2.80mm external irrigationMT-TDN28
Twist drill 3.20mm external irrigationMT-TDN32
Twist drill 3.80mm external irrigationMT-TDN38
Twist drill 4.50mm external irrigationMT-TDN45
Twist drill 5mm external irrigationMT-TDN50
Twist drill 5.50mm external irrigationMT-TDN55
Marking drill 1.90mmMT-TD110
Pilot drill 2mmMT-TD200
Twist drill 2.80mmMT-TD280
Twist drill 3.20mmMT-TD320
Twist drill 3.80mmMT-TD380Twist drill 4.50mmMT-TD450
Twist drill 5mmMT-TD500
Twist drill 5.50mmMT-TD550
MT-BT032Body try in 3.20mm
MT-BT045Body try in 4.50mm
MT-BT050Body try in 5mm
MT-BT055Body try in 5.50mm
MT-SMK136
Short motor key adapter 0.05”
2
MT-DE001Drill extender
MT-RI030Ratchet wrench
11
MT-HHK24Hand key for int. hex. connection
Countersink for wide platform implant system
MT-GDN50
10
Countersink for standard platform implant system
MT-GDN33
MT-BT020Body try in 2mm
MT-BT028Body try in 2.80mm
MT-BT038Body try in 3.80mm
3
MT-PP001Parallel pin
5
MT-HHR07Short hand screwdriver for 0.05” hex.
MT-HHR13Long hand screwdriver for 0.05” hex.
MT-HW001Hand wrench
7
MT-MMH10Short motor adapter for int. hex. connection
9
MT-MMH20Long motor adapter for int. hex. connection
®
4
MT-DI001Implant Direction Indicator
MT-HMR10Long direct hand and ratchet hex. key
12
1
2
3
4
12
5
6
7
8
9
10
11
MT-MRH20Hex. ratchet long adapter for int. hex. connection
MT-MRH10Hex. ratchet short adapter for int. hex. connection
8
© MIS Corporation. All Rights Reserved.
MIS Implants Technologies Ltd. www.mis-implants.com
®
MIS’s Quality System complies with international quality standards: ISO 13485:2003 - Quality Management System for Medical Devices, ISO 9001: 2008 – Quality Management System and CE Directive for Medical Devices 93/42/EEC. MIS’s products are cleared for marketing in the USA and CE approved.
MT-HHK24
Hand wrench
MT-MMH10
Advanced Surgical kitwall chart
Advanced Surgical kitContent:
1
MP-GW001 Rev. 4
MT-LMK13Long motor key adapter 0.05”
Advanced Surgical kit with external irrigation drills includes:
Option 1 (MK-EI35)
Option 2 (MK-IR35)
Option 3 (MK-0035)
Advanced Surgical kit with internal irrigation drills includes:
Advanced Surgical kit supplied without drills.
Marking drill 1.90mm external irrigationMT-TDN19
Pilot drill 2mm external irrigationMT-TDN20
Twist drill 2.80mm external irrigationMT-TDN28
Twist drill 3.20mm external irrigationMT-TDN32
Twist drill 3.80mm external irrigationMT-TDN38
Twist drill 4.50mm external irrigationMT-TDN45
Twist drill 5mm external irrigationMT-TDN50
Twist drill 5.50mm external irrigationMT-TDN55
Marking drill 1.90mmMT-TD110
Pilot drill 2mmMT-TD200
Twist drill 2.80mmMT-TD280
Twist drill 3.20mmMT-TD320
Twist drill 3.80mmMT-TD380Twist drill 4.50mmMT-TD450
Twist drill 5mmMT-TD500
Twist drill 5.50mmMT-TD550
MT-BT032Body try in 3.20mm
MT-BT045Body try in 4.50mm
MT-BT050Body try in 5mm
MT-BT055Body try in 5.50mm
MT-SMK136
Short motor key adapter 0.05”
2
MT-DE001Drill extender
MT-RI030Ratchet wrench
11
MT-HHK24Hand key for int. hex. connection
Countersink for wide platform implant system
MT-GDN50
10
Countersink for standard platform implant system
MT-GDN33
MT-BT020Body try in 2mm
MT-BT028Body try in 2.80mm
MT-BT038Body try in 3.80mm
3
MT-PP001Parallel pin
5
MT-HHR07Short hand screwdriver for 0.05” hex.
MT-HHR13Long hand screwdriver for 0.05” hex.
MT-HW001Hand wrench
7
MT-MMH10Short motor adapter for int. hex. connection
9
MT-MMH20Long motor adapter for int. hex. connection
®
4
MT-DI001Implant Direction Indicator
MT-HMR10Long direct hand and ratchet hex. key
12
1
2
3
4
12
5
6
7
8
9
10
11
MT-MRH20Hex. ratchet long adapter for int. hex. connection
MT-MRH10Hex. ratchet short adapter for int. hex. connection
8
© MIS Corporation. All Rights Reserved.
MIS Implants Technologies Ltd. www.mis-implants.com
®
MIS’s Quality System complies with international quality standards: ISO 13485:2003 - Quality Management System for Medical Devices, ISO 9001: 2008 – Quality Management System and CE Directive for Medical Devices 93/42/EEC. MIS’s products are cleared for marketing in the USA and CE approved.
MT-HHK24
Hand wrench
MT-MMH10
Advanced Surgical kitwall chart
Advanced Surgical kitContent:
1
MP-GW001 Rev. 4
MT-LMK13Long motor key adapter 0.05”
Advanced Surgical kit with external irrigation drills includes:
Option 1 (MK-EI35)
Option 2 (MK-IR35)
Option 3 (MK-0035)
Advanced Surgical kit with internal irrigation drills includes:
Advanced Surgical kit supplied without drills.
Marking drill 1.90mm external irrigationMT-TDN19
Pilot drill 2mm external irrigationMT-TDN20
Twist drill 2.80mm external irrigationMT-TDN28
Twist drill 3.20mm external irrigationMT-TDN32
Twist drill 3.80mm external irrigationMT-TDN38
Twist drill 4.50mm external irrigationMT-TDN45
Twist drill 5mm external irrigationMT-TDN50
Twist drill 5.50mm external irrigationMT-TDN55
Marking drill 1.90mmMT-TD110
Pilot drill 2mmMT-TD200
Twist drill 2.80mmMT-TD280
Twist drill 3.20mmMT-TD320
Twist drill 3.80mmMT-TD380Twist drill 4.50mmMT-TD450
Twist drill 5mmMT-TD500
Twist drill 5.50mmMT-TD550
MT-BT032Body try in 3.20mm
MT-BT045Body try in 4.50mm
MT-BT050Body try in 5mm
MT-BT055Body try in 5.50mm
MT-SMK136
Short motor key adapter 0.05”
2
MT-DE001Drill extender
MT-RI030Ratchet wrench
11
MT-HHK24Hand key for int. hex. connection
Countersink for wide platform implant system
MT-GDN50
10
Countersink for standard platform implant system
MT-GDN33
MT-BT020Body try in 2mm
MT-BT028Body try in 2.80mm
MT-BT038Body try in 3.80mm
3
MT-PP001Parallel pin
5
MT-HHR07Short hand screwdriver for 0.05” hex.
MT-HHR13Long hand screwdriver for 0.05” hex.
MT-HW001Hand wrench
7
MT-MMH10Short motor adapter for int. hex. connection
9
MT-MMH20Long motor adapter for int. hex. connection
®
4
MT-DI001Implant Direction Indicator
MT-HMR10Long direct hand and ratchet hex. key
12
1
2
3
4
12
5
6
7
8
9
10
11
MT-MRH20Hex. ratchet long adapter for int. hex. connection
MT-MRH10Hex. ratchet short adapter for int. hex. connection
8
© MIS Corporation. All Rights Reserved.
MIS Implants Technologies Ltd. www.mis-implants.com
®
MIS’s Quality System complies with international quality standards: ISO 13485:2003 - Quality Management System for Medical Devices, ISO 9001: 2008 – Quality Management System and CE Directive for Medical Devices 93/42/EEC. MIS’s products are cleared for marketing in the USA and CE approved.
MT-HHK24
Hand wrench
MT-MMH10