Ads Pres Nov 14

www.adspcb.com 321.676.6358

Presented by:

Peter Gonzalez November 14, 2008


Overview

• In business since 1994• IPC Certified Layout Designers• Clients: Harris Corporation, Motorola,

Intersil, Raytheon, Lockheed Martin, Northrop Grumman, DRS, SAIC, L-3 Communications, etc.

• Type of Work: Military, Aerospace, Medical, Commercial

• 10 employees


Services


PCB LAYOUT SERVICES

•High Density Multilayer, Blind/Buried vias, Microvias, HDI

•High Speed Digital Designs –DDR, PCI Express, Gigahertz Ethernet

•RF / Microwave Designs•Rigid Flex and Flex Designs•Backplanes, Power Supplies, VME, PMC,CPCI, PCI•Design for DFM and DFT•Constraints Rule Driven Designs•Controlled Impedance, Differential Pairs, Matched Length

•MATERIALS:–FR4, Polyimide, Rogers, Arlon, Isola, Nelco, Getek


ROUTING SERVICES

• Manual Routing of critical Signals

• Constraints Driven Auto-Routing


SCHEMATIC ENTRY

• Full CAD Data output, BOM, netlist


LIBRARY DEVELOPMENT

• Schematic Symbols

• PCB Layout Footprints


DOCUMENTATION

Mechanical &

Electrical CAD

Drafting support


OTHER VALUE ADDED SERVICES

• Reverse Engineering• Digital/Analog Circuit Designs Services


Layout Process


STEP 1: DATA PREPSchematic- Netlist - Datasheets for all parts- Parts List with MFG Part Numbers and

description of parts- Mechanical outline with keepouts and Height

Restrictions- Statement of Work

- Preliminary Component Placement- Suggested Layer Stack-up- Critical Routing, Impedances


STEP 2: PLACEMENT

- Placement of Critical Components

- Layer Stack-up Setup

- Contraint Setup for critical routing

- Placement Review


STEP 3: ROUTING

- Fanout, Plane Setup, Impedance Calculation

- Pre-routes of all critical signals- Completion of routing (Manually or Auto-routing)

- Routing Review

- Back annotate Reference Designators

- Generation of Assembly and Fabrication Drawings


STEP 4: POST PROCESS & DELIVERABLES

1- XXXXXX_mfg.zip Everything the MFG needs to assemble the board.XXXXXX.val CDS2FAB FILE FOR ASSEMBLYdata.file UNICAM FILE FOR ASSEMBLYroute.txt VALOUT FILES FOR ASSEMBLY board.txt “ pad.txt “symbol.txt “testprep.log TEST POINT REPORTXXX-ccam.cad CIRCUIT CAM FILE

2- XXXXXX_art.zip Everything the Vendor needs to fabricate the bare board (Gerber Files).ads-fab.art fabrication drawing ads-l0X.art layer 01 thru however many layers there are.ads-smt.art solder mask topads-smb.art solder mask bottomads-spt.art solder paste topads-spb.art solder paste bottomads-sst.art silk screen topads-ssb.art silk screen bottomphotoplot.log Photoplot/Gerber log fileart_aper.txt Aperture listart_param.txt Gerber parametersADS-001.tap NC Drill filenctape.log NC Drill count

testprep.log TEST POINT REPORTXXXXXX.ipc IPC 356 NET LIST for E-Test


POST PROCESS & DELIVERABLES (cont’d)

3- XXXXXX_brd.zip CAD Database and reports for ArchiveXXXXXX.brd ALLEGRO DATABASE BOARD FILEnet.rpt ALLEGRO NET LIST FILE.place.rpt COMPONENT (X, Y POSITION)sum.rpt ALLEGRO SUMMARY REPORTtestprep.log TEST POINT REPORT

4- XXXXXX_dxf.zip DXF files for every layer.asyt.dxf ASSEMBLY TOP DXF FILEasyb.dxf ASSEMBLY BOTTOM DXF FILEfab.dxf FABRICATION DRAWING DXF FILE

5- XXXXXX_pdf.zip PDF files for every layer.asyt.pdf ASSEMBLY TOP PDF FILEasyb.pdf ASSEMBLY BOTTOM PDF FILEfab.pdf FABRICATION DRAWING PDF FILE

6- XXXXXX_odb.zip ODB++ Manufacturing files

Accreditations page:

www.adspcb.com 321.676.6358 www.adspcb.com 321.676.6358

Ads Pres Nov 14

Business

file unicam file

cds2fab file

pdf file fab

pdf file asyb

dxf file fab

dxf file asyb

nc drill file

routing routing review