ADPICO Catalogue

ADPICO

Since its inception, ADPICO has strengthenedits position in the production and supply of highquality steel tubes and pipes that meet theincreasing requirements of steel users.These advances helped ADPICO to becomea leading steel supplier to its main markets,in particular the booming construction marketof UAE and other GCC countries.

We have achieved a multifaceted businessthrough strategic business plans and supplythe best in products and service throughconstant technological development andcustomer service. We are constantly strivingto break new ground in the areas ofenvironmentally friendly production techniques,innovative management practices and alliancerelationships. Today our focus and vision isprimarily on the production of the highestquality steel products for our customers.

ADPICO’s product range includesDouble Submerged Arc Welded PipesAPI Line PipesGalvanized Tubes and PipesERW Gas & Water PipesHollow Structural SectionsIndustrial TubesManufactures According To EN, DIN,BS, ASTM, AWWA & API Standards

| Los Angeles

New York |

Houston |

| Germany

Qatar |

| Jordan

| Saudi Arabia

| Kuwait

| U.A.E.

| Italy

| Oman

| Seattle

| Oakland

Savannah |

Tampa |

Wilmington |

| Belgium

Egypt |

| Vancouver

Montreal |

Toronto |

Our Markets

Quality SystemCertificates

5L - 0542 API Spec 5LQ1 - 0317 API Spec Q1TS - 0123 ISO/TS 29001QR - 0585 ISO 9001:2008

Customer satisfaction is thefoundation of ADPICO's qualitypolicy. Each process from theprocurement of raw materialsthrough production to deliveryof our products is monitoredto insure continuous keydevelopments. Our qualitypolicy standard is continuallychallenged by implementingstringent and precise controlson incoming raw materials,production and verificationprocesses.

In year 2006, our entiremanufacturing process receivedthe internationally recognizedQuality Management Systembased on ISO 9001:2000 andISO/TS 29001 as well as theAPI 5L certification. But then,effective December 2008, ourQuality Management Systemupgraded and re-certified uponcompliance to the requirementsof ISO 9001:2008. At the sametime, our gas pipe products rangeexpanded with spiral arc weldedpipes, COWH based onAPI 5L / ISO 3183.

Our focus from the outest hasalways been quality andproductivity which would givethe most optimal benefits to ourcustomers. The company'srelationship with all its clientsis a partnership. The strongsymbiotic relationships withcustomers express ADPICO'svitality to grow substantially inthe years ahead. These allianceshave been built on trust...trust generated throughunderstanding and cooperation.

ADPICO will develop and deliver products and servicesthat conform to our customers requirements.Our philosophy is quality products.

ADPICO’s factory is one of the largest and mostadvanced pipe mills in the region having beenconstructed on 4 million sqft. of land in theIndustrial City of Abu Dhabi.

(mm) (in) (mm) (kg/m) (mm) (kg/m) (mm) (kg/m)

508 20 5.6 69.38 10.3 126.41 15.9 192.95559 22 5.6 76.42 10.3 139.37 15.9 212.95610 24 6.4 95.26 11.1 163.93 17.5 255.69660 26 6.4 103.15 11.1 177.62 20.6 277.27711 28 6.4 111.20 11.9 205.15 20.6 350.72762 30 6.4 119.25 11.9 220.12 22.2 376.63813 32 6.4 127.30 11.9 235.09 22.2 432.93864 34 6.4 135.35 11.9 250.05 22.2 460.85914 36 7.9 176.52 11.9 264.72 22.2 488.22965 38 7.9 186.46 11.9 279.69 22.2 516.14

1016 40 7.9 196.39 11.9 294.66 22.2 544.061067 42 8.7 227.05 14.3 371.12 22.2 571.981118 44 8.7 237.99 14.3 389.21 22.2 599.901168 46 8.7 248.72 14.3 406.84 22.2 627.271219 48 8.7 259.66 14.3 424.82 22.2 655.191321 52 9.5 307.25 14.3 460.79 22.2 711.031422 56 9.5 330.91 14.3 496.14 22.2 766.321524 60 9.5 354.80 12.7 473.31 22.2 822.161626 64 9.5 378.70 12.7 505.26 22.2 878.001727 68 11.9 503.30 15.9 670.91 22.2 933.301828 72 12.7 568.83 17.5 781.75 23.8 1059.491930 76 12.7 600.46 17.5 825.34 23.8 1118.762032 80 14.3 711.52 19.1 948.09 25.4 1256.832134 84 14.3 747.35 19.1 995.94 25.4 1320.502235 88 14.3 783.17 19.1 1043.80 25.4 1384.142438 96 15.9 949.85 20.6 1228.23 25.4 1511.422642 104 15.9 1029.52 20.6 1331.46 25.4 1638.692845 112 15.9 1109.19 20.6 1434.68 25.4 1765.973048 120 15.9 1188.87 20.6 1537.91 25.4 1893.25

WEIGHT

MINIMUM MIDDLE MAXIMUM

THICKNESS WEIGHT THICKNESS WEIGHT THICKNESSNOMINAL SIZE

Double Submerged Arc Welded PipesProduction Standards > AWWA C200Length Specifications > 6 meters up to 18 metersFinishing Operations > Double submerged spiral arc welded pipes.

Transmission of liquids, air or non-aggressive gas, structural, industrial and pile works.

nominal (in) (mm) (kg/m)

1/4 0.540 2.24 0.6403/8 0.675 2.31 0.8481/2 0.840 2.77 1.2653/4 1.050 2.87 1.6811 1.315 3.38 2.500

1 1/4 1.660 3.56 3.3781 1/2 1.900 3.68 4.047

2.11 3.0212.77 3.9283.18 4.4793.58 5.0153.91 5.4464.37 6.0264.78 6.5472.11 3.6902.77 4.7913.18 5.4613.58 6.1313.96 6.7414.37 7.3954.78 8.0352.11 4.5092.77 5.8783.18 6.7113.58 7.5293.96 8.3034.37 9.1074.78 9.9105.49 11.2792.11 5.1782.77 6.7413.18 7.7083.58 8.6603.96 9.5384.37 10.4764.78 11.3985.74 13.5716.35 14.9102.11 5.8333.18 8.7053.58 9.7763.96 10.7734.37 11.8444.78 12.9015.16 13.8685.56 14.9106.02 16.0706.35 16.9047.14 18.8537.92 20.7878.56 22.320

WEIGHTSIZE (in) BASIC O.D. THICKNESS

4 1/2 4.500

2 3/8 2.375

2 7/8 2.875

3 1/2 3.500

4 4.000

API Line PipesProduction Standards > ISO 3183 / API 5L Gr A, B, X 42, X46, X 52, X 60, X 65 (PSL 1) ASTM A53 Gr A, BHeat Treatment > 2 inch up to 8 inch: weld seam annealedFinishing Operations > Plain End - Square cut or bevelled

On-shore & off-shore pipelines for transmission of oil, natural gas and petrochemicals.

5L-0542

nominal (in) (mm) (kg/m)

2.11 7.2323.18 10.8183.96 13.4224.78 16.0705.56 18.6156.55 21.7697.14 23.6157.92 26.0558.74 28.5559.53 30.9502.11 8.6302.77 11.2943.18 12.9313.58 14.5383.96 16.0564.37 17.6634.78 19.2555.16 20.7435.56 22.3206.35 25.3567.11 28.2577.92 31.3378.74 34.3739.53 37.2743.18 16.9043.96 21.0114.78 25.2365.16 27.2015.56 29.2846.35 33.3017.04 36.7837.92 41.2628.18 42.5278.74 45.3109.53 49.208

6 5/8 6.625

SIZE (in) BASIC O.D. THICKNESS WEIGHT

5 9/16 5.563

8 5/8 8.625

nominal (mm) (in) (mm) (lb/ft) (kg/m)

1/4 13.7 0.088 2.24 40 0.42 0.623/8 17.1 0.091 2.31 40 0.56 0.831/2 21.3 0.109 2.77 40 0.85 1.263/4 26.7 0.113 2.87 40 1.14 1.70

0.133 3.38 40 1.68 2.500.179 4.55 80 2.18 3.24

1 1/4 42.2 0.140 3.56 40 2.28 3.391 1/2 48.3 0.145 3.68 40 2.72 4.05

0.154 3.91 40 3.66 5.450.218 5.54 80 5.03 7.480.203 5.16 40 5.80 8.630.276 7.01 80 7.67 11.410.125 3.18 - 4.52 6.730.156 3.96 - 5.57 8.290.188 4.78 - 6.67 9.920.216 5.49 40 7.59 11.290.250 6.35 - 8.69 12.930.125 3.18 - 5.18 7.710.156 3.96 - 6.41 9.540.226 5.74 40 9.12 13.570.125 3.18 - 5.85 8.700.156 3.96 - 7.24 10.770.188 4.78 - 8.68 12.920.219 5.56 - 10.02 14.910.237 6.02 40 10.80 16.070.250 6.35 - 11.36 16.900.281 7.14 - 12.68 18.870.312 7.92 - 13.97 20.790.337 8.56 80 15.00 22.320.156 3.96 - 9.01 13.410.188 4.78 - 10.81 16.090.219 5.56 - 12.51 18.610.258 6.55 40 14.63 21.770.281 7.14 - 15.87 23.610.312 7.92 - 17.51 26.050.344 8.74 - 19.20 28.570.375 9.53 80 20.79 30.940.188 4.78 - 12.95 19.270.219 5.56 - 14.99 22.310.250 6.35 - 17.04 25.360.280 7.11 40 18.99 28.260.312 7.92 - 21.05 31.320.344 8.74 - 23.11 34.390.375 9.53 - 25.05 37.270.188 4.78 - 16.98 25.270.203 5.16 - 18.29 27.220.219 5.56 - 19.68 29.280.250 6.35 20 22.39 33.320.277 7.04 30 24.40 36.310.312 7.92 - 27.72 41.250.322 8.18 40 28.60 42.560.344 8.74 - 30.47 45.340.375 9.53 - 33.06 49.19

SIZE (in) BASIC O.D.

1 33.4

THICKNESS SCHEDULE

114.3

2 60.3

2 1/2 73.0

3 1/2 101.6

WEIGHT

8 219.1

5 141.3

6 168.3

3 88.9

4

ASTM A53:2007 (available in schedule 10 to 80)

Production Standards > ASTM A53, ASTM A123, ISO 1461

Transmission of liquids, air or non-aggressive gas, scaffolding and construction.

0.70 0.80 0.90 1.00 1.10 1.20 1.50 1.80 2.00 2.50 3.00 4.00 5.00 6.00

(inch) (mm)

1/8 10.2 0.161 0.181 0.202 0.222 0.241 0.260 0.315

1/4 13.5 0.220 0.250 0.279 0.308 0.411 0.364 0.443 0.519

3/8 17.2 0.281 0.319 0.357 0.394 0.431 0.467 0.573 0.675 0.740 0.894

1/2 21.3 0.357 0.406 0.455 0.503 0.551 0.598 0.736 0.870 0.957 1.160 1.350

3/4 26.9 0.453 0.515 0.578 0.639 0.700 0.761 0.940 1.115 1.229 1.509 1.760

1 33.7 0.570 0.650 0.729 0.807 0.886 0.963 1.190 1.415 1.560 1.925 2.250 2.900

1 1/4 42.4 0.813 0.912 1.010 1.105 1.200 1.520 1.800 2.000 2.460 2.920 3.790

1 1/2 48.3 0.931 1.040 1.150 1.265 1.380 1.730 2.060 2.280 2.820 3.350 4.370 5.340

2 60.3 1.450 1.595 1.740 2.180 2.600 2.880 3.570 4.240 5.560 6.820

2 1/2 76.1 2.030 2.215 2.760 3.300 3.660 4.550 5.420 7.120 8.780 10.390

3 88.9 2.380 2.598 3.240 3.870 4.300 5.340 6.370 8.400 10.360 12.290

4 114.3 4.990 5.540 6.900 8.240 10.890 13.490 16.030

5 139.7 8.460 10.120 13.390 16.620 19.800

6 165.1 12.240 16.220 20.150 24.030

7 193.7 14.120 18.720 23.280 27.790

8 219.1 16.000 21.230 26.42 31.550

BASIC O.D.

THICKNESS (mm)

WEIGHT (kg/m)

Round Tubes

Industrial TubesProduction Standards > BS EN 39, DIN EN 10219-2, DIN 2395, DIN 1615 - DIN 2458, DIN 17120, DIN 59411 ASTM A252, ASTM A513, ASTM A500 Gr A, B, CSteel Qualities > S23S, S27S, S35S, ST12-03/DC01, ST37-2, SAE C1010, SAE C1022

Construction, industrial, automotive and furniture.

0.70 0.80 0.90 1.00 1.10 1.20 1.50 1.80 2.00 2.50 3.00 4.00 5.00 6.00 7.00 8.00

1 1/2 x 1 0.734 0.823 0.912 1.020 1.090 1.350 1.610 1.780 2.190 2.5902 x 1 1.150 1.240 1.380 1.720 2.050 2.270 2.800 3.330 4.340

2 x 1 1/2 1.380 1.460 1.650 2.050 2.450 2.710 3.360 3.990 5.230 6.4103 x 1 1.680 1.820 2.270 2.710 3.010 3.730 4.440 5.820 7.150

3 x 1 1/2 2.530 3.030 3.350 4.160 4.960 6.510 8.0103 x 2 2.906 3.473 3.849 4.410 4.781 5.150 5.7004 x 2 4.140 4.590 5.700 6.810 8.980 11.100 13.1704 x 3 4.717 5.231 6.508 7.772 10.265 12.708 14.2105 x 2 5.231 6.508 7.772 10.265 12.708 14.2105 x 3 6.160 7.680 9.170 12.140 15.050 17.0206 x 2 6.160 7.680 9.170 12.140 15.050 17.9106 x 3 8.540 10.210 13.520 16.770 19.9806 x 4 9.220 11.030 14.610 15.140 21.6108 x 4 14.120 18.720 23.280 27.790

20 x 10 0.316 0.359 0.401 0.444 0.440 0.527 0.647 0.763 0.83930 x 20 0.615 0.690 0.764 0.780 0.912 1.120 1.340 1.480 1.810 2.14040 x 20 0.734 0.823 0.912 0.960 1.090 1.350 1.610 1.780 2.190 2.590 3.35050 x 30 1.210 1.300 1.440 1.830 2.180 2.410 2.990 3.550 4.63060 x 30 1.380 1.470 1.650 2.050 2.450 2.710 3.360 3.990 5.23080 x 40 2.750 3.290 3.650 4.530 5.400 7.100 8.750

100 x 40 3.230 3.870 4.290 5.330 6.360 8.390 10.860 12.280100 x 50 3.580 4.140 4.590 5.700 6.810 8.980 11.100 13.170120 x 60 5.520 6.870 8.210 10.900 13.440 15.990150 x 75 10.364 13.724 17.038 20.304 23.524115 x 110 10.364 13.724 17.038 20.304 23.524170 x 100 12.479 15.544 20.563 24.534 28.459 32.336200 x 150 21.557 26.829 32.054 37.232 42.363

A x B (inch)

A x B (mm)

DIMENSION

THICKNESS (mm)

WEIGHT (kg/m)

0.70 0.80 0.90 1.00 1.10 1.20 1.50 1.80 2.00 2.50 3.00 4.00 5.00 6.00 7.00 8.00

1 x 1 0.540 0.615 0.690 0.764 0.800 0.912 1.120 1.340 1.480 1.810 2.1401 1/4 x 1 1/4 0.780 0.868 0.962 1.020 1.150 1.420 1.700 1.870 2.310 2.7301 1/2 x 1 1/2 1.040 1.150 1.240 1.380 1.720 2.050 2.270 2.800 3.330 4.430

2 x 2 1.520 1.680 1.820 2.270 2.710 3.010 3.730 4.440 5.820 6.8202 1/2 x 2 1/2 2.900 3.470 3.850 4.780 5.700 7.500 8.750

3 x 3 3.460 4.140 4.590 5.700 6.810 8.980 10.360 12.2803 1/2 x 3 1/2 4.980 5.520 6.870 8.210 10.900 12.708 15.101

4 x 4 6.160 7.680 9.170 12.140 15.050 17.0205 x 5 9.650 11.450 15.300 19.000 21.6706 x 6 14.060 18.650 23.190 27.6808 x 8 0.170 0.194 0.219 0.243 0.267 0.287

10 x 10 0.214 0.244 0.275 0.306 0.336 0.36212 x 12 0.258 0.295 0.331 0.368 0.405 0.437 0.54615 x 15 0.316 0.359 0.401 0.440 0.440 0.527 0.647 0.763 0.83919 x 19 0.411 0.470 0.529 0.588 0.646 0.700 0.875 1.046 1.15920 x 20 0.419 0.477 0.535 0.592 0.610 0.704 0.869 1.030 1.130 1.380 1.63025 x 25 0.540 0.615 0.690 0.764 0.780 0.912 1.120 1.340 1.480 1.810 2.14030 x 30 0.734 0.823 0.912 0.960 1.090 1.350 1.610 1.780 2.190 2.59040 x 40 1.090 1.210 1.300 1.440 1.830 2.180 2.410 2.990 3.550 4.63050 x 50 1.520 1.650 1.820 2.270 2.710 3.010 3.730 4.440 5.820 7.15060 x 60 1.990 2.216 2.750 3.290 3.650 4.530 5.400 7.100 8.75070 x 70 2.340 2.590 3.230 3.870 4.290 5.330 6.360 8.390 10.360 12.28075 x 75 4.590 5.700 6.810 8.980 11.100 13.17080 x 80 3.710 4.450 4.930 6.130 7.320 9.670 11.960 14.21090 x 90 5.520 6.870 8.210 10.900 13.440 15.990

100 x 100 6.160 7.680 9.170 12.140 15.050 17.910120 x 120 9.240 11.050 14.640 18.180 21.670125 x 125 9.650 11.550 15.300 19.000 22.650127 x 127 9.650 11.450 15.300 19.000 21.670135 x 135 10.580 12.650 16.770 20.830 24.850 29.624 33.856175 x 175 21.557 26.829 32.054 37.232 42.363

DIMENSION

A x A (inch)

A x A (mm)

THICKNESS (mm)

WEIGHT (kg/m)

Square Tubes

Rectangular Tubes

Hollow Structural SectionsProduction Standards > BS EN 39, DIN EN 10219-2, DIN 2395, DIN 1615 - DIN 2458, DIN 17120, DIN 59411 ASTM A252, ASTM A513, ASTM A500 Gr A, B, CSteel Qualities > S23S, S27S, S35S, ST12-03/DC01, ST37-2, SAE C1010, SAE C1022

Construction, industrial, automotive and furniture.

(mm) (in) (mm) (mm) (kg/m) plain end

LIGHT

8 1/4 13.5 1.8 0.51510 3/8 17.2 1.8 0.67015 1/2 21.3 2.0 0.94720 3/4 26.9 2.3 1.38025 1 33.7 2.6 1.98032 1 1/4 42.4 2.6 2.54040 1 1/2 48.3 2.9 3.23050 2 60.3 2.9 4.08065 2 1/2 76.1 3.2 5.71080 3 88.9 3.2 6.720100 4 114.3 3.6 9.750

MEDIUM

8 1/4 13.5 2.3 0.64110 3/8 17.2 2.3 0.83915 1/2 21.3 2.6 1.21020 3/4 26.9 2.6 1.56025 1 33.7 3.2 2.41032 1 1/4 42.4 3.2 3.10040 1 1/2 48.3 3.2 3.56050 2 60.3 3.6 5.03065 2 1/2 76.1 3.6 6.42080 3 88.9 4.0 8.360100 4 114.3 4.5 12.200125 5 139.7 5.0 16.600150 6 165.1 5.0 19.800

HEAVY

8 1/4 13.5 2.9 0.76510 3/8 17.2 2.9 1.02015 1/2 21.3 3.2 1.44020 3/4 26.9 3.2 1.87025 1 33.7 4.0 2.93032 1 1/4 42.4 4.0 3.79040 1 1/2 48.3 4.0 4.37050 2 60.3 4.5 6.19065 2 1/2 76.1 4.5 7.93080 3 88.9 5.0 10.300100 4 114.3 5.4 14.500125 5 139.7 5.4 17.900150 6 165.1 5.4 21.300

Note: In addition to above series, three types of L, L1 and L2 are also within the range of ADPICO products.

NOMINAL SIZE BASIC O.D. THICKNESS WEIGHT

BS EN 10255

ERW Gas & Water PipesProduction Standards > Production Norms; BS EN 10255 / BS 1387 (Light, Medium, Heavy) ASTM A53, DIN 2440, DIN 2441Heat Treatment > 2 inch up to 8 inch: weld seam annealedFinishing Operations > Plain End - Square cut or bevelled

Transmission of liquids, air and non-aggressive gas.

nominal (mm) (mm) (kg/m)

3/8 17.2 2.35 0.8901/2 21.3 2.65 1.2703/4 26.9 2.65 1.6501 33.7 3.25 2.550

1 1/4 42.4 3.25 3.2701 1/2 48.3 3.25 3.770

2 60.3 3.65 5.3302 1/2 76.1 3.65 6.800

3 88.9 4.05 8.8504 114.3 4.50 12.800

SIZE (in) BASIC O.D. THICKNESS WEIGHT

nominal (mm) (mm) schedule (kg/m) (psi) (kg/cm²) (psi) (kg/cm²)

3/8 17.1 2.31 40 0.878 700 50 700 501/2 21.3 2.77 40 1.320 700 50 700 50

2.87 40 1.760 700 50 700 503.91 80 2.270 850 61 850 613.38 40 2.610 700 50 700 504.55 80 3.350 850 61 850 61

1 1/4 42.2 3.56 40 3.520 1200 84 1300 911 1/2 48.3 3.68 40 4.210 1200 84 1300 91

3.91 40 5.670 2300 162 2500 1765.54 80 7.710 2500 176 2500 1765.16 40 8.920 2500 176 2500 1767.01 80 11.700 2500 176 2500 1763.18 - 7.100 1290 91 1500 1063.96 - 8.670 1600 113 1870 1324.78 - 10.300 1930 136 2260 1595.49 40 11.670 2220 156 2500 1766.35 - 13.310 2500 176 2500 176

3 1/2 101.6 5.74 40 13.570 2030 143 2370 1673.18 - 9.410 1000 70 1170 823.96 - 11.480 1250 88 1460 1034.78 - 13.610 1500 106 1750 1235.56 - 15.610 1750 123 2040 1446.02 40 16.770 1900 134 2210 1566.35 - 17.600 2000 141 2330 1647.14 - 19.570 2250 158 2620 1857.92 - 21.480 2500 176 2800 1978.56 80 23.020 2700 190 2800 197

5 141.3 6.55 40 23.080 1670 117 1950 1376 168.3 7.11 40 29.960 1520 107 1780 1258 219.1 8.18 40 45.100 1340 94 1570 110

GRADE A GRADE BWEIGHT

3 88.9

4 114.3

2 60.3

2 1/2 73.0

3/4 26.7

1 33.4

SIZE (in) BASIC O.D. THICKNESS

According to ASTM A53

According to DIN 2440/2444, EN 10240

ERW Galvanized Steel PipesProduction Standards > ASTM A53, ASTM A123, ISO 1461 EN 10240, BS EN 10255 / BS 1387 (Light, Medium, Heavy) BS 729, DIN 2440/2444

Transmission of liquids, air or non-aggressive gas, scaffolding and construction.

Notes

HEAD OFFICEALMAS TOWER, LEVEL 44D

JUMEIRAH LAKE TOWERSP.O. BOX 62361, DUBAI, U.A.E.

TEL (971) 4 440 98 89FAX (971) 4 440 98 90

FACTORYINDUSTRIAL CITY OF ABU DHABI

P.O. BOX 72911, ABU DHABI, U.A.E.TEL (971) 2 550 04 60FAX (971) 2 550 04 70

WWW.ADPICO.COM