Bottle / Blow Moulding Adherend ADMER ® PP-type Grades PREFACE ADMER ® PP type grades are designed for multi-layer films, bottles or sheets composed of poly- propylene (PP) and EVOH or PA. These grades are based on PP. As a result of our advanced anhydride grafting technology, these grades create superb adhesion to EVOH and PA, while maintaining an excellent processability and a thermal stability equivalent to that of common PP. CHARACTERISTICS Homopolymer-PP based grades: QB510E: Standard grade for Bottle, Sheet and Blown Film. QB520E: Advanced grade for Bottle and Sheet. QF300E: Standard grade for Cast Film with PA. Copolymer-PP based grade QF551E: Advanced grade for Film. ADMER ® GRADE LINE-UP IN EUROPE – PP TYPE Sheet Blown Film Cast Film EVOH PA QB510E QB520E QB510E QB520E QB510E QF551E QF551E QB510E QB510E QB510E QF300E
4
Embed
ADMER PP-type Grades - Группа компаний ...utsrus.com/media/admer-pp.pdf · ADMER ® PP-type Grades PREFACE ADMER ... All ADMER ® grades conform to FDA 21CFR, §175.105
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Bottle /Blow MouldingAdherend
ADMER® PP-type Grades
PREFACE
ADMER® PP type grades are designed for multi-layer films, bottles or sheets composed of poly-propylene (PP) and EVOH or PA.These grades are based on PP. As a result of our advanced anhydride grafting technology, thesegrades create superb adhesion to EVOH and PA, while maintaining an excellent processability anda thermal stability equivalent to that of common PP.
CHARACTERISTICS
Homopolymer-PP based grades:QB510E: Standard grade for Bottle, Sheet and Blown Film.QB520E: Advanced grade for Bottle and Sheet.QF300E: Standard grade for Cast Film with PA.
Copolymer-PP based gradeQF551E: Advanced grade for Film.
ADMER® GRADE LINE-UP IN EUROPE – PP TYPE
Sheet Blown Film Cast Film
EVOH
PA
QB510EQB520E
QB510EQB520E
QB510EQF551E
QF551E
QB510E QB510E QB510E QF300E
PHYSICAL PROPERTIES AND ADHESION PERFORMANCE
*1) T-Peel method: Speed=300mm/minExperimental conditions are followed, although the real production conditions should be optimized by customer's line.
*2) Processing Temperature: PA=250 °C, ADMER=230 °C, PP=230 °C. Die land length = 45mm. Blow up ratio=3,5.Bottle Shape = 400 ml cylindrical bottle
*3) Processing Temperature: PA=250 °C, ADMER & PP=240 °C, Die=260 °C, Die lip Distance = 0,5 mm*4) Processing Temperature: EVOH=210 °C, ADMER=200 °C, PP=220 °C. Die land length=45mm. Blow up ratio=3.5,
Bottle Shape=400 ml cylindrical bottle.*5) Processing Temperature: EVOH=210 °C, ADMER=230 °C, PP=230 °C. DIE=210 °C. Die lip distance=0,5 mm
1) EC: Monomers and additives are listed as authorized monomers/additives in the EUplastics directive 2002/72/EC and/or its amendment 2004/1/EC, 2004/19/EC, 2005/79/EC,2007/19/EC and 2008/39/EC. Status: 06th March 2008It is the responsibility of end-users to check by appropriate migration test on the final materialor articles the suitability for contact with different food types and various end-use conditions.
2) USA: All ADMER® grades conform to FDA 21CFR, §175.105 (Adhesives) for indirect foodcontact. Some grades are also suitable for direct food contact. Status: 1st April 2007
Please contact your sales representatives for further details.
FOOD STATUS
GRADE SELECTIONAdhesionPe
rform
ance
Low
High
1 2 3 4 5 6 7
MFR at 230 °C (g/10min)
Homo-PP based
Copolymer-PP basedQF551 E
QF300 E
QB510E
QB520E
Mitsui Chemicals Europe GmbHOststraße 10 · 40211 Duesseldorf · Germany
The information and numerical results are for information only and are given in good faith. In view of numerous factors of which we areunaware and which are beyond our control regarding the use of our products, we cannot guarantee that this information covers all possibleaspects of the subject. Moreover, we cannot accept any responsibility with regard to patents for applications and processes described.