Adjusting The Upper Auger - J&M Manufacturing · 2020. 8. 28. · UPPER AUGER J&M Manufacturing 419-375-2376 284 Railroad St. 2 Extend the auger into the unload position. Engage the

ADJUSTING THE UPPER AUGER

J&M Manufacturing419-375-2376

284 Railroad St.

2

Extend the auger into the unload position. Engage the upper auger into the lower auger by rotating the driveline.

Extend The Auger Parts Description

3

1.25” Hex Nut 1.25” Hex Nut

4 Hole Flange Bearing

Pipe SpacerHeadpan

Parts Description

4

1/8”-3/16”

Untighten the 1-1/4” Hex Nut at least an 1/4”.

Tighten the 1-1/4” Hex Nut until it is tight against the 4 hole fl ange bearing.

Tighten the 1-1/4” Hex Nut until there is a 1/8” to 3/16” gap inbetween the 4 hole fl ange bearing and the headpan.

1

2 3

Adjustment