Adjustable beam angle LED bar DATASHEET EFFI-FLEX Version 2.4.2020 Last update: February 25, 2020 Mini Parc du Verger – Bâtiment E 1 Rue de Terre Neuve 91940 LES ULIS, FRANCE Tel: +33 9 72 38 17 80 Fax: +33 9 72 11 21 69 Email: [email protected]Page 1 / 7 Very intense and uniform illuminated area Full range of colors: from UV to IR, white, multi and hyperspectral Long lifetime and minimal maintenance Standard connections and fasteners Flexibility: 4 adjustable illumination angles & 3 different projection windows Electronics Connectors M12 – 4 Pins Power supply 24V DC Illumination mode Continuous or strobe mode Power consumption Depends on the amount of LEDs (page 6) Electronic mode Auto-Strobe or continuous Optics Wavelength Single (from UV to IR) wavelength / White / Multispectral / Hyperspectral Mechanics Weight 60g + 60g per LED Width x height x length 51mm x 49mm x length depends on the amount of LEDs Fastener One T-slot on the back for 8mm T-nut (M6 recommended), and one slot on the side for M6 hex nut Material Device body: Aluminum alloy & ABS; Window: PMMA Environment Working temperature 0°C to 50°C IP code IP50 (option IP67→ Refer to EFFI-FLEX-CPT and IP69K→ Refer to EFFI-FLEX-IP69K) Applications Quality control Pick and place Strobe version available
7
Embed
Adjustable beam angle LED bar Version 2.42020/02/04 · Last update: Adjustable beam angle LED bar DATASHEET EFFI-FLEX Version 2.4.2020 February 25, 2020 Mini Parc du Verger – Bâtiment
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Adjustable beam angle LED bar
DATASHEET EFFI-FLEX Version 2.4.2020 Last update: February 25, 2020
To handle the optical components, wearing gloves is strongly recommended.
To clean the optical components:
> Use compressed air duster if there is dust.
> To remove marks on the lens or the window, just a drop or two wiped of non-alcohol-based lens cleaning fluid in a gentle circular motion with a cleaning tissue. Always apply the fluid to a tissue rather than the lens itself.
P0 (Without lens) P1 P2 P3
P3 P2 P1
Lens
LED
Optical considerations
How to change the lens positions of the EFFI-FLEX
How to handle & to clean optical components?
Illuminance vs the working distance
Adjustable beam angle LED bar
DATASHEET EFFI-FLEX Version 2.4.2020 Last update: February 25, 2020
The EFFI-Flex is available in Vis-NIR broadband hyperspectral version with a single, continuous spectrum LED source, that provides a relatively flat spectrum between 400nm and 900nm.
Spectrum of the hyperspectral LED « Visible-NIR »
The EFFI-Flex-HSI-XX-400900V1-… is only available with ELS-500 electronics version. Please contact Effilux for additional information.
Linescan configuration
NB: Configuration 2 requires an additional thermal management system
Profile
Option: Hyperspectral version
Edge effect Transverse profile
Adjustable beam angle LED bar
DATASHEET EFFI-FLEX Version 2.4.2020 Last update: February 25, 2020