QS SeeTouch Build-To-Order Configuration Guide Page 1 of 7 Revised: 1/15/2015 TABLE OF CONTENTS ADDITIONAL BUILD-TO-ORDER COLORS - NOVA TPLATES...................................................................................... 2 BUILD-TO-ORDER COLOR MODEL NAMES....................................................................................................................... 2 BUILD-TO-ORDER BUTTON CONFIGURATIONS ............................................................................................................... 3 BUILD-TO-ORDER BUTTON CONFIGURATION MODEL NAMES ..................................................................................... 3 SEETOUCH FACEPLATE KIT STYLE AND COLOR AVAILABILITY ................................................................................. 4 CPN3500 - 2 GANG NOVA TFACEPLATES WITH CUSTOM BUTTON OPENINGS ..................................................... 6 NT-5081-4973-FB-WH-CPN3500 ........................................................................................................................................................ 6 NT-5081-C71-FB-SN-CPN3500 ........................................................................................................................................................... 6 COLOR/FINISH .................................................................................................................................................................................... 6 CPN6156 – SEETOUCH MOUNTED HORIZONTALLY FOR USE IN ITALY....................................................................... 6 Button layout to be found at end of the document
8
Embed
ADDITIONAL BUILD-TO-ORDER COLORS - NOVA T PLATES 2 … seeTouch build to order - 2015 01 … · Page 2 of 7 Revised: 1/15/2015 ADDITIONAL BUILD-TO-ORDER COLORS - NOVA T PLATES Standard
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
QS SeeTouch Build-To-Order Configuration Guide
Page 1 of 7 Revised: 1/15/2015
TABLE OF CONTENTS
ADDITIONAL BUILD-TO-ORDER COLORS - NOVA T PLATES ...................................................................................... 2
BUILD-TO-ORDER COLOR MODEL NAMES ....................................................................................................................... 2
CPN6156 – SEETOUCH MOUNTED HORIZONTALLY FOR USE IN ITALY ....................................................................... 6
Button layout to be found at end of the document
QS SeeTouch Build-To-Order Configuration Guide
Page 2 of 7 Revised: 1/15/2015
ADDITIONAL BUILD-TO-ORDER COLORS - NOVA T PLATES
Standard button configurations ONLY!
Lead Time: 1 Week (2 Weeks for quantities greater than 50 pieces) Pricing: use “cust-seeTouchBTN” as model name. The line mark will be the model number built below.
SeeTouch faceplates, and inserts can be painted in any color that the customer desires. SeeTouch buttons, however cannot be painted. With the addition of SeeTouch in Satin Colors, several new standard button colors are available. In standard products, some of these colors are only available with the Claro / Satin Color style faceplates, and not with the NOVA T (square corners, beveled edges) faceplates. As a Build-To-Order CPN, we can offer the following additional colors with painted NOVA T faceplates, inserts, and adapters, and molded buttons. This provides the customer with several additional color choices in the NOVA T style, while still using engraveable, backlit buttons.
Color Suffix CPN Light Almond LA CPN5026 Taupe TP CPN5026 Biscuit BI CPN5026 Eggshell ES CPN5026 Snow SW CPN5026
BUILD-TO-ORDER COLOR MODEL NAMES Any Standard QSWS2B or QSWS2R SeeTouch faceplate/button kit can be built to order in the colors listed above. The model names are exactly the same as the standard product model name, with the following exceptions:
Change the color code to the CPN color suffix (above). Add the CPN to the end of the model name.
NOTES: With Nova T plates, it is possible to paint faceplates, inserts, and adapters in other colors, while using contrasting,
standard color buttons. A new CPN request for any other combinations should be submitted to Custom Controls Engineering for any mixed combinations.
Glossy plates can NOT be painted.
QS SeeTouch Build-To-Order Configuration Guide
Page 3 of 7 Revised: 1/15/2015
BUILD-TO-ORDER BUTTON CONFIGURATIONS
SeeTouch faceplate kits can be built to order in virtually any combination of buttons suit a specific application.
Lead Times: Painted Finishes : 2 Weeks Metal Finishes: 4 Weeks
Paint Pricing: use “cust-seeTouchBTN” as model name. The line mark will be the model number built below. Metal Pricing: Contact Customer service.
These CPN's are to be used ONLY for SeeTouch faceplate kits. Please order the custom faceplate kit, and order an
appropriate standard base unit separately. They are available in all standard NOVA T colors and metal finishes (listed in the style and availability table below). Do NOT use Commercial Systems "Standard Engraving Codes" when ordering custom configurations. Add a "-E" or
"-NST" to the model name and submit an engraving detail sheet onto the network as normal. If you don't see the configuration you need, please submit a new CPN request form to the Custom Controls Group.
Please remember to include all of the necessary information:
Which buttons are needed? Be specific: Buttons 1-3 and Button 7 (Always count from the top) Do you need the IR window? (position 6 ONLY)
NOTE: NOT ALL FACEPLATE KITS ARE APPROPRIATE FOR ALL CONTROLS. For Example: Note: Shade button kits in standalone can’t be change. If you are ordering a configuration with an IR window, check to be sure that the base unit has an IR sensor.
BUILD-TO-ORDER BUTTON CONFIGURATION MODEL NAMES
QSWS2B - 3 C I - WH - E - CPNXXXX
QSWS2R, QSWS2B, RKA, RKD
(1-7) This is the number of button openings on the faceplate. Note: Raise/Lower buttons count as 1 opening, because they only take up 1 opening.
C Stands for "Custom"
COLOR See tables below for a listing of colors available in each style.
E QSWS2R kits NST QSWS2R Kits <blank> - Unengraved Note: Do NOT use standard engraving codes for Commercial Systems SeeTouch (E01, EGN, etc), for CPN faceplate kits.
I or N (Insert or No-Insert for QSWS2R kits)
See Drawings on following pages to find the CPN that matches the requested configuration.
QS SeeTouch Build-To-Order Configuration Guide
Page 4 of 7 Revised: 1/15/2015
SEETOUCH FACEPLATE KIT STYLE AND COLOR AVAILABILITY
No-Insert Style QSWS2R faceplate kit. NOVA T Plate. NOVA T Plastic and metal finishes. Includes NOVA T style faceplate and adapter. Can be ganged FB with other controls by ordering a CUSTOM multi-gang faceplate separately. Submit a CPN request form for multigang plates (3 gangs and up) with custom No-Insert configurations. Custom 2 gang faceplates use CPN3500.
Molded Plastic Finishes
Matte Finish NOVA T colors* White (WH) Beige (BE) Ivory (IV) Taupe (TP) Gray (GR) Brown (BR) Black (BL) (See below for Glossy and Satin Color finishes*) Metal Finishes Satin Brass (QSWS2B) Bright Brass (BB) Bright Chrome (BC) Antique Brass (QB) Antique Bronze (QZ) Satin Chrome (SC) Satin Nickel (SN) Bright Nickel (BN) Clear Anodized Aluminum (CLA) Black Anodized Aluminum (BLA) Brass Anodized Aluminum (BRA) NOTE: Eggshell, Biscuit, Light Almond, Almond, and Snow are available with T plates using painted plates/insert. A different CPN is required for these. See Custom Color section elsewhere in this manual.
Insert Style QSWS2R faceplate kit NOVA T Plate. NOVA T Plastic and metal finishes. Fits into a standard R3 faceplate opening. Includes single gang NOVA T style R3 faceplate and adapter. Can be ganged FB with other controls by ordering a Multigang faceplate separately. Order an R3 opening for Custom SeeTouch Insert-Style faceplate kits.
CONTINUED ON NEXT PAGE.
QS SeeTouch Build-To-Order Configuration Guide
Page 5 of 7 Revised: 1/15/2015
RKD Button kit Claro / Diva Satin Colors only. No Faceplate included. G
Snow (SW) Eggshell (ES) Biscuit (BI) Taupe (TP) Midnight (MN) Limestone (LS)* Gray buttons Stone (ST)* Gray buttons Desert Stone (DS)* Taupe buttons Ochre (OC)* Ivory buttons Blue Mist (BT)* White buttons Terracotta (TC)* Taupe buttons Hot (HT)* Taupe buttons
Blue Stone (BG)* Gray Buttons
Cobalt (CB)* Gray Buttons
Green Briar (GB)* Gray Buttons
Merlot (MR)* Taupe Buttons
Sienna (SI)* Brown Buttons
Gold Stone (GS)* Ivory Buttons
Mocha Stone (MS)* Taupe Buttons
Palladium (PD)* Gray Buttons
Plum (PL)* Taupe Buttons
Turquoise (TQ)* Gray Buttons
GL
OS
SY
White (WH) Black (BL)
Almond (AL) Ivory (IV)
Gray (GR) Brown (BR)
Light Almond (LA)
SA
TIN
CO
LO
RS
Snow (SW) Eggshell (ES) Biscuit (BI) Taupe (TP) Midnight (MN) Limestone (LS)* Gray buttons Stone (ST)* Gray buttons Desert Stone (DS)* Taupe buttons Ochre (OC)* Ivory buttons Blue Mist (BT)* White buttons Terracotta (TC)* Taupe buttons Hot (HT)* Taupe buttons Blue Stone (BG)* Gray Buttons Cobalt (CB)* Gray Buttons Green Briar (GB)* Gray Buttons Merlot (MR)* Taupe Buttons Sienna (SI)* Brown Buttons Gold Stone (GS)* Ivory Buttons Mocha Stone (MS)* Taupe Buttons Palladium (PD)* Gray Buttons Plum (PL)* Taupe Buttons Turquoise (TQ)* Gray Buttons
*Buttons do NOT Match Consult Homeworks SeeTouch Ordering
Guide PN: 367-571 for pictures and additional information
*Buttons do NOT Match faceplate/insert Consult Homeworks SeeTouch Ordering
Guide PN: 367-571 for pictures and additional information
QS SeeTouch Build-To-Order Configuration Guide
Page 6 of 7 Revised: 1/15/2015
CPN3500 - 2 GANG NOVA T FACEPLATES WITH CUSTOM BUTTON OPENINGS Used to gang two custom button configurations or a custom and a standard button configuration under a 2 gang faceplate
Lead Times: Painted Finishes : 2 Weeks Metal Finishes: 4 Weeks Pricing: Contact Customer Service
NOTE: This CPN is for a 2 gang faceplate with custom button openings. The faceplate does NOT come with buttons. The customer must order the single gang faceplate kits separately. NOVA T FACEPLATES WITH CUSTOM BUTTON OPENINGS MODEL NAME
NT - XXXX - XXXX - FB - WH - E - CPN3500
XXXX = 4-digit CPN number of the custom opening in the left gang.
C(XX) = standard opening Must have 1 custom CPN # in the faceplate model.
Any T opening from the Faceplate Manual can be used if a standard opening is required.
FB = fins broken NFB = no fins broken
COLOR/FINISH Faceplates are available in any standard Matte painted color or any standard metal finish
Use a –E in the model name if engraving is required on faceplate. Leave this field blank if engraving is not required
Example of a model name for a 2 gang fins broken faceplate with a custom opening for CPN5081 on the left and a custom opening for CPN4973 on the right: NT-5081-4973-FB-WH-CPN3500 Example of a model name for a 2 gang fins broken faceplate with a custom opening for CPN5081 on the left and a standard 5BRL (C71) opening on the right: NT-5081-C71-FB-SN-CPN3500
QS SeeTouch Build-To-Order Configuration Guide
Page 7 of 7 Revised: 1/15/2015
CPN6156 – SEETOUCH MOUNTED HORIZONTALLY FOR USE IN ITALY This CPN is used to order any SeeTouch product for use in Italy (with the exception of bulk units). The units will be exactly the same as a standard SeeTouch unit with the following custom modifications:
1. The engraving will be vertical, down the buttons. 2. The raise and lower buttons are different from standard units. The arrows are rotated so that they point up
and down in the rotated position, rather than left and right.
Any standard SeeTouch unit, button kit, or replacement faceplate kit may be ordered with this CPN. Simply add “-CPN6156” to the end