Adapt Software 050311

8/10/2019 Adapt Software 050311

1/18

ADAPT-Builder / Floor Pro

Florian AalamiPresident, ADAPT Corporation


2/18

ADAPT Offers Wide Range of Solutionsfor Design of Post Tensioned Structures

ABI: for design of prestressed and/or post tensioned concrete bridges

PT: for 2D equivalent frame method analysis of floor systems and beams

Builder: 3D modeling and analysis platform for concrete structures

Floor Pro: 3D FEM Design of concrete floor systemsMAT: 3D FEM Design of foundations systems

SOG: 3D FEM Design of post tensioned slabs on expansive soils

FELT: Utility for calculation of tendon losses and elongations


3/18

ADAPTFloor Pro is Best Used To:

Design complex floor systems

Optimize efficiency and performance of complete slab system

c en y pro uce g vo ume pro ec s

Implement BIM design workflow

Investigate existing structures


4/18

Unlike other 2D plate software for floors, ADAPTFloor

Pro is based on a true 3D FEM analysis model that leads to more reliable results


5/18


6/18

A Better Way to Design Slabs forProjects Modeled in ETAB

as y extract mo e n o from ETABS to ADAPT:

Geometry Gravity Loads Lateral Loads


7/18

Layout tendons as they will beconstructed or use schematictendon profiles using effective force

Automated tendonayou anoptimization options


8/18


9/18

Force along tendon is clearly shown during modeling


10/18

All reinforcement bars in ADAPTFloor Pro are intelligent,

,

program calculated or as base, user defined to SAVE your design


11/18

Model all as built reinforcement and post tensioning to

to develop strengthening or re use designs

Reinforcement modeled in slab


12/18

Cracked deflection calculation based on actual

spos t on o re n orcement an not mu t p er


13/18

Option to design for specific crack width

Reporting of crack width

Longterm deflections considering load history


14/18

Design results can be c ec e or eac

support line


15/18

Automated P/T Shop DrawingGeneration

en on a r

Heights Shown in Plan

Tendon Chair Heights Shown at Every 3 Along Beam Elevation


16/18

Tendon Quantities and ElongationReports Readily Available

Easily extract tendon, rebar and concrete quantities from your design model

Tendon elon ation re orts prepare information needed for installation


17/18

ADAPTFloor Pro automatically calculates and reports the

Factors considered include: Post or re stressin Cracking Contribution of any load case in x,y,z direction

Mode 1: 4.20 Hz Mode 1: 4.30 Hz Mode 1: 4.48 Hz


18/18

building modeling, analysis and design capabilities with integrated post tensioning!

Gone will be the days of running separate slab and eneral buildin desi n software

All vertical shortening, lateral and post

.

Adapt Software 050311

Documents