ACW2012

. ACF.CW.LA1.S01.1

LEMBAGA PEPERIKSAAN KEMENTERIAN PELAJARAN MALAYSIA

ASSESSMENT CHECKLIST FORM

LEARNING AREA: INFORMATION AND COMMUNICATION TECHNOLOGY AND SOCIETY

Name of Candidate

IC No

Index No

Construct : S01 Computer Security Measures

Aspect : LA1.S01.1 Apply Correct Security Procedures Using Antivirus

Instrument : Demonstration

Assessment : 1 / 2 / 3

No

.

Criterion

Max

imu

m M

ark Evidence

(to be filled by candidate if necessary)

Mark Obtained Remarks by

assessorH1 H2 H3

1. Choose antivirus software to be used.

Write the name of the antivirus software.

1

1

H1

H2

H3

2. Start the antivirus software and select area to be scanned.

State the area selected.

1

1

H1

H2

H3

3. Scan the selected area.

Copy scan summary.

1

1

H1

H2

H3

4. Choose and apply any or all of the following when virus is detected – delete/remove, clean/heal, quarantine/move to vault.

State action taken.

1

1

H1

H2

H3

8 Total Mark

Actual Mark

Date

Candidate’s Signature

------------------------------

Assessor’s Signature

----------------------------------

Name :

1

TOC.CW.LA1.S01.1

TABLE OF CONSTRUCT


Aspect : LA1.S01.1 Apply Correct Security Procedures Using Antivirus


MARK CRITERIA EVIDENCE NOTE

2

1. Choose antivirus software to be used.

Write the name of the antivirus software.

Completed ACF.CW.LA1.S01.1.

Use any antivirus software available e.g. Kaspersky, McAfee Virus Scan, Norton Antivirus, Trend Micro PC-Cillin, Dr Solomon, AVG, etc.

Scan area can be specific folder, floppy disk, or flash memory.

Candidate can print screen the scan summary.

If no virus is detected, criterion four is considered done. Write “No action taken”.

Values:

Confident

Responsible

2

2. Start the antivirus software and select area to be scanned.

State the area selected.

23. Scan the selected

area.

Copy scan summary.

2

4. Choose and apply any or all of the following when virus is detected – delete/remove, clean/heal, quarantine/move to vault.

State action taken

8 TOTAL MARK

2

ACF.CW.LA1.S01.2




Name of Candidate

IC No

Index No


Aspect : LA1.S01.2 Apply Correct Security Procedures Using Anti-Spyware



No

.

Criterion

Ma

xim

um

M

ark

Evidence



assessorH1 H2 H3

1. Choose anti-spyware software to be used.

Write the name of the anti-spyware software.

1

1

H1

H2

H3

2. Start the anti-spyware application and choose a scan mode.

State the scan mode selected.

1

1

H1

H2

H3

3. Copy the scan summary. 2 H1

H2

H3

4. Choose and apply any of the following when spyware is detected - remove/quarantine the identified object(s).

State the action taken.

1

1

H1

H2

H3

8 Total Mark

Actual Mark

Date


------------------------------


----------------------------------

Name :

3

TOC.CW.LA1.S01.2

TABLE OF CONSTRUCT


Aspect : LA1.S01.2 Apply Correct Security Procedures Using Anti-Spyware



2

1. Choose anti-spyware software to be used.

Write the name of the anti-spyware software.

Completed ACF.CW.LA1.S01.2

Suggested anti-spyware software: Lavasoft Ad-Aware SE Personal.

Print screen can be used to display scan summary.

If no spyware is detected, criterion four is considered done. Write “No action taken”.

Values: Confident

Responsible

2

2. Start the anti-spyware software and choose a scan mode.

State the scan mode selected.

23. Scan the selected area.

Copy scan summary.

2

4. Choose and apply any of the following when spyware is detected - remove/quarantine the identified object(s).

State the action taken.

8 TOTAL MARK

4

ACF.CW.LA1.S02.1




Name of Candidate

IC No

Index No

Construct : S02 Impact of ICT on Society

Aspect : LA1.S02.1 Locate and present information on impact of ICT on society

Instrument : Verbal Presentation


No

.

Criterion

Ma

xim

um

M

ark

Evidence



assessorH1 H2 H3

1. Locate information from more than one source.

Write the number of sources referred.

1

H1

H2

H3

2. Present the information in 5 to 10 slides.

Write the number of slides used.

1

1

H1

H2

H3

3. Presentation includes:

a. Topic

b. Content

c. Conclusion

d. Sources of reference

Submit a soft copy OR hard copy of the presentation.

1

2

1

1

Candidate present in class

4. Display cooperation.

a. Write the names of group members.

b. Verbal verification from group members or assessor’s observation.

1

1

H1

H2

H3

10 Total Mark

Actual Mark

Date


------------------------------


----------------------------------

5

Name:

6

TOC.CW.LA1.AS02.1

TABLE OF CONSTRUCT

Construct : S02 Impact of ICT on Society

Aspect : LA1.S02.1 Locate and present information on impact of ICT on society

Instrument : Verbal Presentation


1

1. Locate information from more than one source. Write the number of sources referred.





Values: Confident

Responsible

2

2. Present the information in 5 to 10 slides.Write the number of slides used.

5

3. Presentation includes:a. Topicb. Contentc. Conclusiond. Sources of

reference

Submit a soft copy or hard copy of the presentation.

2

4. Display cooperation.a. Write the names

of group members.

b. Verbal verification from group members OR assessor’s observation.

10 TOTAL MARK

7

ACF.CW.LA2.S03.1



LEARNING AREA : COMPUTER SYSTEM

Name of Candidate

IC No

Index No

Construct : S03 PC Assembling

Aspect : LA2.S03.1 Assemble the components of a PC



No

.

Criterion

Ma

xim

um

M

ark

Evidence (to be filled by candidate if

necessary)


assessorH1 H2 H3

1. Fix the processor correctly.Write processor specification.

11

H1

H2

H3

2. Fix the RAM correctly.Write RAM capacity.

11

H1

H2

H3

3. Install the power supply unit correctly.Write power (w) and voltage (V) of unit.

1

1

H1

H2

H3

4. Install the hard disk correctly.Write hard disk capacity.

11

H1

H2

H3

5. Install the floppy drive AND/OR optical drive correctly.Write drive(s) installed.

1

1

H1

H2

H3

6. Boot up of the computer successfully.

1

Candidate demonstrate7. Check BIOS setup :a. hard disk detectedb. floppy drive AND/OR

optical drive detected

11

13 Total Mark

Actual Mark

Date


------------------------------


---------------------------------- Name:

8

TOC.CW.LA2.S03.1

TABLE OF CONSTRUCT

Construct : S03 PC Assembling

Aspect : LA2.S03.1 Assemble the components of a PC



21. Fix the processor

correctly.Write processor specification.


CAUTION: Assessor must make sure that the processor is properly fixed by the candidate to avoid permanent damage to it.

Installation of floppy drive OR optical drive is required if and only if they come with the PC.

Candidates must connect all necessary cables.

Values: Accurate Confident Responsible

22. Fix the RAM

correctly.Write RAM capacity.

2

3. Install the power supply unit correctly.Write power (W) and voltage (V) of unit.

24. Install the hard disk

correctly. Write hard disk capacity.

2

5. Install the floppy drive AND/OR optical drive correctly.Write drive(s) installed.

16. Boot up the computer

successfully.

2

7. Check BIOS setup.a. Hard disk

detectedb. Floppy drive

AND/OR optical drive detected

13 TOTAL MARK

TOC.CW.LA2.SO4.1

9

ACF.CW.LA2.S04.1




Name of Candidate

IC No

Index No

Construct : S04 Software Installation

Aspect : LA2.S04.1 Install operating system, application software and utility program



No

.

Criterion

Ma

xim

um

M

ark


necessary)

Mark ObtainedRemarks by

assessorH1 H1 H1

1. Install an operating system.

Write the name of the operating system installed.

2

1

H1

H2

H3

2. Install application software.

Write the name of the application software installed.

2

1

H1

H2

H3

3. Install a utility program.

Write the name of the utility program installed.

2

1

H1

H2

H3

9 Total Mark

Actual Mark

Date


------------------------------


----------------------------------

Name :

10

TOC.CW.LA2.SO4.1TABLE OF CONSTRUCT

Construct : S04 Software Installation

Aspect : LA2.S04.1 Install operating system, application software and utility program



3

1. Install an operating system.Write the name of the operating system installed.





Values: Confident

Responsible

3

2. Install application software.Write the name of the application software installed.

3

3. Install a utility program.Write the name of the utility program installed.

9 TOTAL MARK

11

ACF.CW.LA2.S05.1




Name of Candidate

IC No

Index No

Construct : S05 Current and Future Development of Open Source Software and Latest Development in ICT

Aspect : LA2.S05.1 Explain the latest open source software available and the latest development in ICT

Instrument : Written Assignment


No

.

Criterion

Ma

xim

um

Ma

rk Evidence(to be filled by

candidate if necessary)


assessorH1 H2 H3

1. Explain the latest open source OSa. Meaningb. TWO examples

22

Refer to submitted written assignment

2. Explain the latest open source application software

a. Meaning b. TWO examples

22

3. Explain the latest development in ICTa. ONE hardwareb. ONE software

22

4. Explain pervasive computinga. Meaning b. TWO examples

22

5. Follow required written assignment format

a. content formatb. document format

11

6. Display cooperation.a. Write the names of group

members.b. Verbal verification from group

members or assessor’s observation.

1

1

H1

H2

H3

20 Total Mark

Actual Mark

Date


------------------------------


----------------------------------

12

TOC.CW.LA2.S05.1

TABLE OF CONSTRUCT


Aspect :LA2.S05.1

Explain the latest open source software available and the latest development in ICT



41. Explain the latest open

source OSa. Meaningb. TWO examples

Written Assignment

Candidate works in groups of 2 to 4 to conduct study AND/OR for discussion.

Written assignment MUST be done individually.

Refer to WAF.CW.LA2.S05.1.

Suggested duration:2 to 4 weeks

Values: Appreciate Cooperate Confident

4

2. Explain the latest open source application software

a. Meaning b. TWO examples

4

3. Explain the latest development in ICT

a. ONE hardwareb. ONE software

44. Explain pervasive

computinga. Meaning b. TWO examples

2

5. Follow required written assignment format:a. content formatb. document format

2



b. Verbal verification from group members or assessor’s observation.

20 TOTAL MARK

13

WAF.CW.LA2.S05.1WRITTEN ASSIGNMENT FORMAT

LEARNING AREA: COMPUTER SYSTEM


Aspect :LA2.S05.1

Explain the latest open source software available and the latest development in ICT


Instruction:

Work in groups of two to four to find information and discuss on the latest open source software available and the latest development in ICT. Complete this written assignment individually.

You are given two to four weeks to complete this assignment.

Content Format

1.0 Introduction

(meaning of open source software, hardware, software, etc)

2.0 The Latest Open Source Operating System (OS)

2.1 Meaning of open source OS

2.2 Examples of open source OS

(explain two examples)

3.0 The Latest Open Source Application Software

3.1 Meaning of open source application software

3.2 Examples of open source application software


4.0 The Latest Development in ICT

4.1 Hardware

(state specification OR special features of ONE hardware and compare it to previous model(s))

4.2 Software

(state year/date of release, special features of ONE software and compare it to previous version(s))

5.0 Pervasive Computing

5.1 Meaning of pervasive computing

5.2 Examples of pervasive computing


6.0 Conclusion

Reference

(give at least two sources of reference)

Document Format cover page

o Candidate’s detailso Title: The latest Open Source Software Available and the Latest Development in ICT

page margin - top, bottom, left, and right: 1”, paper size - A4 line spacing - 1.5 lines typeface - Times New Roman, font size- - 12 pts (content), and14 pts for title/heading number of pages - 3 to 10

14

ACF.CW.LA3.S06.1



LEARNING AREA : COMPUTER NETWORKS AND COMMUNICATIONS

Name of Candidate

IC No

Index No

Construct : S06 Network Facilities Setup

Aspect : LA3.S06.1 Crimp and Test UTP Cables



No

.

Criterion

Ma

xim

um

M

ark

Evidence (to be filled by



assessorH1 H2 H3

1 Crimp a Straight Cable

1. Skin off the cable jacket.

2. Untwist and straighten each wire.

3. Arrange the wires according to the 568B wiring schematic order for both ends.

4. Cut and insert the wires into a RJ45 connector.

5. Crimp the cable using a crimping tool.

2

Candidate demonstrate

2. Check the straight cable is crimped successfully using a cable tester.

2

3. Crimp a Crossed Cablea. Skin off the cable jacket.b. Untwist and straighten each wire.c. Arrange the wires according to the

568A wiring schematic order for one end AND 568B wiring schematic order for the other end.

d. Cut and insert the wires into a RJ45 connector.

e. Crimp the cable using a crimping tool.

2

4. Check the crossed cable is crimped successfully using a cable tester.

2

8 Total Mark

Actual Mark

Date


------------------------------


Name :

15

TOC.CW.LA3.S06.1

TABLE OF CONSTRUCT


Aspect : LA3.S06.1 Crimp and Test UTP Cables



2

1. Crimp a Straight Cable Skin off the cable jacket. Untwist and straighten each

wire. Arrange the wires according to

the 568B wiring schematic order for both ends.

Cut and insert the wires into a RJ45 connector.

Crimp the cable using a crimping tool.

(assessment done on final product)

Crimped straight and

crossed cables.

At least 1 meter of UTP cable is recommended.

Candidate may refer to the wiring schematic manual in the Learning Module.

The cables must be labelled and kept in a safe place

Values: Precise Confident Abide

22. Check the straight cable is

crimped successfully using a cable tester.

2

3. Crimp a Crossed Cable Skin off the cable jacket. Untwist and straighten each

wire. Arrange the wires according to

the 568A wiring schematic order for one end AND 568B wiring schematic order for the other end.

Cut and insert the wires into a RJ45 connector.

Crimp the cable using crimping tool.

(assessment done on final product)

24 Check the crossed cable is

crimped successfully using a cable tester.

8 TOTAL MARK

16

ACF.CW.LA3.S06.2




Name of Candidate

IC No

Index No


Aspect : LA3.S06.2 Configure and Test Network Connection



No

.

Criterion

Ma

xim

um

M

ark Evidence (to be filled by


Assessor tick () if completed Remarks by

assessorH1 H2 H3

1. Set an IP address.

Write the IP address.

1

1

H1

H2

H3

2. Set a subnet mask.

Write the subnet mask.

1

1

H1

H2

H3

3. Choose another computer to test the configuration.

Write the IP address of the computer.

1

H1

H2

H3

4. Ping the other computer.

Copy the ping result.

1

2

H1

H2

H3

8 Total Mark

Actual Mark

Date


------------------------------


----------------------------------

Name :

17

TOC.CW.LA3.S06.2

TABLE OF CONSTRUCTConstruct : S06 Network Facilities Setup

Aspect : LA3.S06.2 Configure and Test Network Connection



21. Set an IP Address.

Write the IP address.


IP Address and Subnet Mask given by the assessor.

Values: accurate confident responsible abide

22. Set a Subnet Mask.

Write the subnet mask.

1

3. Choose another computer to test the configuration.Write the IP address of the computer.

34. Ping the other

computer.Copy the ping result.

8 TOTAL MARK

18

ACF.CW.LA3.S07.1




Name of Candidate

IC No

Index No

Construct : S07 Current and Future Development in Networks and Communications

Aspect : LA3.S07.1 Describe the Latest Development in Networks and Communications.



No

.

Criterion

Ma

xim

um

M

ark

Evidence (to be filled by candidate

if necessary)


AssessorH1 H2 H3

1. Describe Mobile Computinga. definitionb. specification, services, and

frequencies

26

Refer to submitted written assignment

2. Describe Internet Technology and Services

a. VoIPb. BLOG

22

3. Describe types of network. a. PAN b. VPNc. WLANd. WIMAX

2222

4. Follow required written assignment format

a. content formatb. document format

11

5. Display cooperation.a. Write the names of group members.b. Verbal verification from group

members or assessor’s observation

11

H1

H2

H3

24 Total Mark

Actual Mark

Date


------------------------------


----------------------------------

19

TOC.CW.LA3.S07.1

TABLE OF CONSTRUCTConstruct : S07 Current and Future Development in Networks and Communications.

Aspect : LA3.S07.1 Describe the Latest Development in Networks and Communications



8

1. Describe Mobile Computing

a. definition

b. specifications, services, frequencies

Written Assignment

Candidates work in groups of 2 to 4 to conduct the study and for discussion.

Written assignment must be done individually.Suggested duration:2 to 4 weeks

Refer to Written Assignment Format in WAF.CW.LA3.S07.1

Values: cooperate responsible

abide

4

2. Describe Internet Technology and Services a. VoIPb. BLOG

8

3. Describe types of network a. PAN, b. VPN, c. WLAN, d. WIMAX

2

4. Follow required written assignment format:a. content formatb. document format

2



b. Verbal verification from group members or assessor’s observation

24 TOTAL MARK

WAF.CW.LA3.S07.1

20

WRITTEN ASSIGNMENT FORMAT


Construct : S07 Current and Future Development in Networks and Communications

Aspect : LA3.S07.1 Describe the Latest Development in Networks and Communications


Instruction:

Work in groups of two to four to find information and discuss on the latest development in Networks and Communications. Complete this written assignment individually.

You are given two to four weeks to complete this assignment.

Content format

1.0 Introduction

(Computer Networks and Communications)

2.0 Mobile Computing

2.1 Definition

2.2 Specification, services, and frequencies of Mobile Computing

(based on one product e.g. PDA, 3G mobile phone)

3.0 Internet Technology and Services

3.1 VoIP

3.2 BLOG

4.0 Types of network.

4.1 PAN

4.2 VPN

4.3 WLAN

4.4 WIMAX

5.0 Conclusion

(Computer Networks and Communications)

Reference

(give at least two sources of reference)

Document Format (use Word Processor)

cover page

o Candidate’s details

o Title: The Latest Development in Networks and Communications

page margin - top, bottom, left, and right: 1”, paper size - A4

line spacing: 1.5 lines

typeface - Times New Roman, font size - 12 pts (content), 14 pts for title/heading

number of pages - 3 to 10

21

ACF.CW.LA4.S08.1



LEARNING AREA : MULTIMEDIA

Name of Candidate

IC No

Index No

Construct : S08 Multimedia Development

Aspect : LA4.S08.1 Apply All The Phases Of Multimedia Production To Produce An Interactive Educational Multimedia Project

Instrument : Project


No

.

Criterion

Ma

xim

um

M

ark


if necessary)


AssessorH1 H2 H3

1. Analysis Phase

Write the

a. project title

b. objective(s)

c. target audience

1

1

1

Refer to RF.CW.LA4.S08.1

2. Design Phase

Sketch storyboard. 2

3. Implementation Phase

Develop a multimedia project based on the storyboard using an authoring tool.

Write the name of the authoring tool used.

1

4. Testing Phase

Test the developed multimedia product.

Complete the checklist. 2

22

No

.Criterion

Ma

xim

um

M

ark


if necessary)


AssessorH1 H2 H3

5. Evaluation Phase

Ask assessor to evaluate the developed multimedia product.

a. Content

match the project objective(s)

b. Interface

user friendly

interactive

c. Navigation

flow of the slides

all buttons functioning

d. Multimedia Elements

Text

Graphic

Audio

Video

Animation

1

2

2

2


6. Publishing Phase

Submit a softcopy of the multimedia product.

Write the storage medium used and name of the main file or folder.

1

16 Total Mark

Actual Mark

Date


------------------------------


----------------------------------

Name :

23

TOC.CW.LA4.S08.1TABLE OF CONSTRUCT

Construct : S08 Multimedia Development

Aspect : LA4.S08.1 Apply All The Phases Of Multimedia Production To Produce An Interactive Educational Multimedia Project.

Instrument : Project


3

1. Analysis PhaseWrite the project title, objective and target audience.

Completed RF.CW.LA4.S08.1

and a soft copy of the product.

The multimedia product must be interactive, educational and include all five multimedia elements.

Choose any topic from any subjects taught in school: ICT Bahasa Malaysia Bahasa Inggeris Mathematics Science, etc

Authoring Tools: Tool book Presentation s/w Web editor

Values: Creative Integrity

Responsible

22. Design Phase

Sketch storyboard.

1

3. Implementation PhaseDevelop a multimedia project based on the storyboard using an authoring tool.Write the name of the authoring tool used.

2

4. Testing PhaseTest the developed multimedia product.Complete the checklist.

7

5. Evaluation PhaseAsk assessor to evaluate the developed multimedia product.e. Content

match the project objective(s)

f. Interface user friendly interactive

g. Navigation all links/buttons

functioning correctly

h. Multimedia Elements text graphic audio video

c. animation

24

1

6. Publishing Phase Submit a softcopy of the multimedia product.Write the storage medium used and name of the main file or folder.

16 TOTAL MARK

25

ACF.CW.LA4.S09.1



LEARNING AREA : MULTIMEDIA

Name of Candidate

IC No

Index No

Construct : S09 Current And Future Development Of Multimedia

Aspect : LA4.S09.1 Gather Examples Of Immersive Multimedia In Education, Business Or Entertainment.

Instrument : Scrapbook


No

.

Criterion

Ma

xim

um

M

ark


if necessary)

Mark Obtained Remarks by AssessorH1 H1 H1

1 Front cover includes

topic

name of candidate

1

1

Refer to submitted scrapbook

2 Scrapbook contains at least SIX pages excluding front and back covers.

State number of pages.

1

1

H1

H2

H3

3 Collections are relevant to the topic chosen.

2

Refer to submitted scrapbook4 State source and/or date in the

scrapbook.2

5Submit RF.CW.LA4.S09.1

2 Refer to RF.CW.LA4.S09.1

10 Total Mark

Actual Mark

Date


------------------------------


----------------------------------

Name :

26

TOC.CW.LA4.S09.1

TABLE OF CONSTRUCT

Construct : S09 Current and Future Development of Multimedia

Aspect : LA4.S09.1 Gather Examples of Immersive Multimedia In Education, Business or Entertainment

Instrument : Scrapbook


21. Front cover includes

a. topic

b. name of candidate


AND

Scrapbook

Candidate compiles articles, pictures, drawings from different types of sources such as newspapers, magazines, Internet, etc into a scrapbook based on any of the following:

Immersive Multimedia in Education

Immersive Multimedia in Business

Immersive Multimedia in Entertainment

Scrapbook must be done individually.

Values:

creative

responsible

appreciate

22. Scrapbook contains at

least SIX pages excluding front and back covers.

23. Collections are relevant

to the topic chosen.

24. State source and/or

date in the scrapbook.

25. Submit

RF.CW.LA4.S09.1

10 TOTAL MARK

27

ACF.CW.LA5.S10.1



LEARNING AREA : PROGRAMMING

Name of Candidate

IC No

Index No

Construct : S10 Program Development

Aspect : LA5.S10.1 Apply Program Development Phases To Develop A Problem-Solving Program

Type of Instrument : Practical Session


No

.

Criterion

Ma

xim

um

M

ark


necessary)


AssessorH1 H2 H3

1 Problem Analysis

a. Write the problem statement.

b. List all required input items.

c. Write the expected output.

d. Write the formula to be used.

1

1

1

1


2 Program Design

a. Write the pseudocode.

OR

Draw the flowchart.

b. Sketch the user interface design for input.

c. Sketch the user interface design for output.

2

2

2

3 Coding

Develop a program based on (1) and (2).

Write the name of the project file.

1

1

4 Testing and Debugging

a. Write down the data used for each input item listed in 1(b).

b. Write down output based on 4(a).

c. Compile the program.

Write down name of executable file.

2

2

2

28

No

.Criterion

Ma

xim

um

M

ark


necessary)


AssessorH1 H2 H3

5 Documentation

Submit report and soft copy of program.

2 Refer to RF.CW.LA5.S10.1

20 Total Mark

Actual Mark

Date


------------------------------


----------------------------------

Name :

29

TOC.CW.LA5.S10.1

TABLE OF CONSTRUCT

Construct : S10 Program Development

Aspect : LA5.S10.1 Apply Program Development Phases To Develop A Problem-Solving Program

Instrument : Practical Session


4

1. Problem Analysis a. Write the problem

statement.b. List all the required

input itemsc. Write the expected

output.d. Write the formula to be

used.


ANDSubmitted program.

Duration of practical session: 2 periods

Choose any of the suggested projects (refer to APPENDIX B) or propose a new project.

Submit executable file

and/or project file and

form(s).

During evaluation, assessor runs the candidate’s program to validate the output in 4(b) using the data in 4(a).

Values:1. Accurate2. Confident3. Responsible4. Abide

6

2. Program Designa. Write the pseudocode.

ORDraw the flowchart.

b. Sketch the user interface design for input.

c. Sketch the user interface design for output.

2

3. CodingDevelop a program based on (1) and (2).Write the name of the project file.

6

4. Testing and Debugginga. State the test data used

for each input item listed in 1(b).

b. Write the output based on 4(a)

c. Compile the program. Write down the name of the executable file.

2 5. DocumentationSubmit report and soft

20 TOTAL MARK

30

ACF.CW.LA5.S11.1



LEARNING AREA : PROGRAMMING

Name of Candidate

IC No

Index No

Construct : S11 Current And Future Development Of The Latest Programming Languages

Aspect : LA5.S11.1 Find Out The Latest Programming Languages

Instrument : Report


No

.

Criterion

Ma

xim

um

M

ark


necessary)

Mark Obtained Remarks by assessorH1 H2 H3

1. Identify and name the two latest programming languages

2


2. Identify and state

a. the developer

b. when it was developed

c. purpose (why it was introduced) / application

d. platform

e. approach (structured/object-oriented/etc)

f. translator used

2

2

2

2

2

2

3. State the source of reference 2

16 Total Mark

Actual Mark

Date


------------------------------


----------------------------------

Name :

31


Construct : S11 Current And Future Development Of The Latest Programming Languages

Aspect : LA5.S11.1 Find Out The Latest Programming Languages

Instrument : Report


21. Identify and name the two

latest programming languages


Report must be done individually.Suggested duration:

2 weeksValues:

Cooperate

Appreciate

12

2. Identify and state

a. the developer

b. when it was developed

c. purpose (why it was introduced)/application

d. platform

e. approach (structured/object-oriented/etc)

f. translator used

2 3. State the source of reference.

16 TOTAL MARK

32

ACF.CW.LA6.S12.1



LEARNING AREA : INFORMATION SYSTEM

Name of Candidate

IC No

Index No

Construct : S12 Database Development

Aspect : LA6.S12.1 Develop A Database Project

Type of Instrument : Practical Session


No

.

Criterion

Ma

xim

um

M

ark


necessary)


assessorH1 H2 H3

1. State the project title and the objective(s) of the project.

2


AND soft copy of the database project

2. Create all the required tables.

a. Name each table.

b. State the field names for each table.

c. State the primary key(s).

d. Relate the tables.

Draw a line to show the relationship.

2

2

2

2

3. Create a form for each table. 2

4. Enter data into the tables. 2

5. Create a query from two tables. 2

6. Create a report based on the query created.

2

7. Submit the report form and a softcopy of the developed database project.

2

20 Total Mark

Actual Mark

Date


------------------------------


----------------------------------

33

TOC.CW.LA6.S12 1

TABLE OF CONSTRUCT

Construct : S12 Database Development

Aspect : LA6.S12.1 Develop A Database Project

Instrument : Practical Session


21. State the project

title and the objective(s) of the project.


ANDsoft copy of the

database project

Duration of practical session: 2 periods

Choose any of the suggested projects in APPENDIX C or propose a new project.

Draw a line to show the relationship between both tables.

Example:TABLE 1 TABLE 2

Field name

…….

1:M

or

M:N

or

1:1

Field name

…….

Values: accurate confident

responsible

8

2. Create all the required tables. a. Name each table.b. State the field

names for each table.

c. State the primary key(s).

d. Relate the tables.Draw a line to show the relationship.

23. Create a form for

each table.

2 4. Enter data into the tables.

2 5. Create a query from two tables.

26. Create a report

based on the query created.

27. Submit the report

form and a soft copy of the developed database project.

20 TOTAL MARK

34

ACF.CW.LA6.S13.1



LEARNING AREA : INFORMATION SYSTEM

Name of Candidate

IC No

Index No

Construct : S13 Current And Future Developments In Information Systems

Aspect : LA6.S13.1 Find Out Current Developments In Computer Information Systems



No

.

Criterion

Ma

xim

um

M

ark


necessary)


assessorH1 H2 H3

1. Define web-based application. 2


2. Give an example of web-based application.

State the function of the application.

1

1

3. Name a programming language used to develop web-based application.

Name a DBMS used in web-based application.

1

1

4. State an advantage of web-based application compared to non web-based application.

2

5. State a vulnerability of web-based application.

1

6. State source of reference. 1

10 Total Mark

Actual Mark

Date


------------------------------


----------------------------------

Name :

35


Construct : S13 Current And Future Developments In Information Systems

Aspect : LA6.S13.1 Find Out Current Developments In Computer Information Systems.

Instrument : Report


21. Define web-based

application.


Report must be done individually.

Suggested duration: 2 weeks

Values: cooperate responsible

22. Give an example of web-

based application.State the function of the application.

13. Name a programming

language used to develop web-based application.

14. Name a DBMS used in

web-based application.

2/05. State an advantage of

web-based application compared to non web-based application.

16. State a vulnerability of

web-based application.

1 7. State source of reference.

10 TOTAL MARK

ROS

36


INFORMATION AND COMMUNICATION TECHNOLOGY

YEAR ___________

RECORD OF SUBMISSION

Name of Candidate

Identity Card Number

Index Number

Date of Submission/Assessment

Construct CodeAspect Code

SignatureRemarks

Candidate Assessor

ISF.CW

LEMBAGA PEPERIKSAAN

ICT.BSF

37

KEMENTERIAN PELAJARAN MALAYSIA

INDIVIDUAL SCORE FORM

INFORMATION AND COMMUNICATION TECHNOLOGY

YEAR ___________

Name of Candidate

Identity Card Number

Index Number

Code Aspect Mark Remarks

LA1.S01.1 Apply correct security procedures using antivirus

LA1.S01.2 Apply correct security procedures using anti-spy ware

LA1.S02.1 Locate and present information on impact of ICT and society

LA2.S03.1 Assemble the components of a PC correctly

LA2.S04.1 Install operating system, application software and utility programs

LA2.S05.1Explain the latest open source software available and the latest development in ICT

LA3.S06.1 Crimp and test UTP cable

LA3.S06.2 Configure and test network connection

LA3.S07.1 Explain the latest development in networks and communications

LA4.S08.1Apply all the phases of multimedia production to produce an interactive educational multimedia project

LA4.S09.1Gather examples of immersive multimedia in education, business or entertainment

LA5.S10.1Apply program development phases to develop a problem-solving program

LA5.S11.1 Collect information on the latest programming languages

LA6.S12.1 Develop a database project

LA6.S13.1 Find out current developments in computer information systems

TOTAL MARK

VERIFICATION


----------------------------------

Name :

Date :

Internal Verifier’s Signature

----------------------------------

Name :

Date :

External Verifier’s Signature

----------------------------------

Name :

Date :

38

ACW2012

Documents

constructconstruct

h1 h2 h3

input item

user interface

publishing

hard disk

implementation

submitted