This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
1.2 PRODUCT SPECIFICATIONS ...............................................................................................................8 1.2.1 Wideband Repeater ............................................................................................................8 1.2.2 Single band with one sub-band .......................................................................................10 1.2.3 Single band with multiple sub-bands ..............................................................................16 1.2.4 Dual bands-- GSM900 and DCS1800 ...........................................................................22 1.2.5 Channel selective repeater..............................................................................................23
7.1 PRODUCTION OVERVIEW................................................................................................................86 7.2 SPECIFICATIONS.............................................................................................................................88
Installation mode Wall installation(normal);Pole installation(optional) Dimension ≤10w : 520×410×234 mm ; 20w :580×410×234 mm
Weight ﹤2w :23kg ;5w :27kg ;﹤10w:30kg RF connectors N Female
Working temperature -25-+55
Power supply 220V±20%,50/60Hz
Active Product Brochure
www.telestone.com 9
GSM1800
Auto protection in case of self-excitation Perfect Electrical Performances Standard modularized design Excellent monitoring functions, inside back-up battery for monitoring 2 hours
at least Sealed casing, application in all-weather and various environment Multi-power supply (AC,DC and solar power)
Type TS-OR03RB-(27~43 ) Operating frequency Uplink:1710-1785MHz;Downlink:1805-1880MHz
Bandwidth 75MHz
Output power 27dBm, 30dBm 33dBm 37dBm 40dBm 43dBmALC range ≥25dB
Dimension ≤10w : 520×410×234 mm ; 20w :580×410×234 mm Weight ﹤2w :23kg ;5w :27kg ;﹤10w:30kg
RF connectors N Female Working
temperature -25-+55
Power supply 220V±20%,50/60Hz
Auto protection in case of self-excitation
Perfect Electrical Performances Standard modularized design Excellent monitoring functions, inside
back-up battery for monitoring 2 hours at least
Sealed casing, application in all-weather and various environment
Multi-power supply (AC, DC and solar power)
Active Product Brochure
www.telestone.com 11
GSM1800
Auto protection in case of self-excitation Perfect Electrical Performances Standard modularized design Excellent monitoring functions, inside back-up battery for monitoring 2 hours
at least Sealed casing, application in all-weather and various environment Multi-power supply (AC,DC and solar power)
Type TS-OR03RB*-27 ~43 Operating frequency Uplink:1710-1785MHz;Downlink:1805-1880MHz
Bandwidth Can be customized
Output power 27dBm 30dBm 33dBm 37dBm 40dBm 43dBm AGC RANGE ≥25dB
Gain 85dB ~ 95dB Gain adjust range ≥30dB;1dB/step
IMD3 ≤-13dBm ≤-45dBc
Waveform factor Uplink ρ>0.960;Down link ρ>0.950
Noise Factor ≤5dB Ripple in band ≤3dB
Time delay ≤5μs Spurious emission 9KHz-1GHz:≤-36dBm/30KHz;1GHz-12.75GHz:≤-30dBm/30MHz
Out band rejection F(edge)±600kHz:≤-40dBc; F(edge)±1MHz:≤-45dBc; F(edge)±5MHz:≤-55dBc
Port impedance 50Ω VSWR ≤1.5 Case IP65
Installation mode Wall installation(normal);Pole installation(optional) Dimension ≤10w : 520×410×234 mm ; 20w :580×410×234 mm
Weight ﹤2w :23kg ;5w :27kg ;﹤10w:30kg RF connectors N Female
Out band rejection F(edge)±400kHz:≤-30dBc; F(edge)±600kHz:≤-40dBc; F(edge)±1MHz: ≤-50dBc;F(edge)±5MHz: ≤-60dBc
Port impedance 50Ω VSWR ≤1.5 Weight 28kg 32kg 35kg
Power consumption 100W 150W 200 W 250W
Dimensions 580×410×234 mm 630×410×234 mm
Case Waterproof Installation mode Wall installation(normal);Pole installation(optional)
RF connectors N Female Monitoring mode Local(RS232);Remote(Wireless modem)
Working temperature -25-+55
Power supply 220V AC
Active Product Brochure
www.telestone.com 26
2. Fiber optic repeater
2.1 Fiber Optic Repeater Overview
As mobile communication technology changes everyday, Telecom markets
become increasingly competitive and customers unceasingly demand higher
quality network service. Facing with market competition and customers’
requirement of network quality, carriers has enlarged network investment in
abundance to improve network quality. To construct repeaters is an efficient
cost-saving means to enlarge network coverage areas and enhance network
quality. According to signal transmission ways, repeaters can be divided into
wireless repeaters, frequency shift repeaters and optical fiber repeaters.
Wireless repeaters and frequency shift repeaters enlarge base station
coverage area by amplifying wireless signal received from air. The biggest
difference between optic fiber repeaters and wireless repeaters is their signal
transmission ways of between base station and repeater. Optic fiber repeaters
transmit signals by optical fiber when wireless repeaters transmit signals by air.
Therefore, optic fiber repeaters have following advantages:
(1)stable work and good coverage effect.
Because optic fiber repeaters transmit signals through optical fibers that are
not affected by geographical environment, weather change or the adjustment
of donor base station coverage range, optic fiber repeaters work stably and
have good coverage effect.
(2)more flexible design and construction.
Based on working principle of wireless repeaters, wireless repeaters require
donor antennas to be installed in the place where can receive signals and the
intensity of received signal is larger than -80dBm. Therefore, wireless
repeaters can only be installed on the edge of base station coverage scope.
They extend coverage areas at the base station coverage direction. At the
same time, in order to prevent self-excitation of repeaters, enough isolation
Active Product Brochure
www.telestone.com 27
between donor antennas and coverage antennas must be guaranteed.
Therefore, the installation location and ways of wireless repeaters are limited.
In addition, directional antennas are usually adopted to transmit signals when
wireless repeaters are used, and the coverage area is small. Contrary to
wireless signals, it is not necessary to consider the installation location and
ways, the self-excitation phenomenon when optic fiber repeaters are used.
Omni directional antennas or directional antennas can be used according to
the coverage requirement.
Product Introduction
Telestone has independently developed variant kinds of fiber optic repeaters
that can meet many sorts of project requirements. This fiber optic repeater
series has two categories: fiber optic repeaters (slave) and fiber optic
repeaters (master). The two categories of repeaters each provide different
model to meet different coverage requirements. Fiber optic repeaters (slave)
include: 0.5W, 1W, 2W,5W,10W and 20W models. Fiber optic repeaters
(master) include: airborne fiber optic repeater and base station coupling fiber
optic repeater.
Product characteristics:
Incorporating advanced overseas technologies, using high-quality
imported components, and taking modular designs.
Small volume, light weight, strong system integration capacity, excellent
repeater network management system.
High heat radiation design, special lock, effectively waterproof and
moisture-proof, anticorrosive qualities, suitable for outdoor use in all
weather conditions.
Adopts designs with full-duplex twin ports, embedded power source,
convenient installment and high reliability.
Having internet access approval from the Chinese Information Industry
Ministry.
Active Product Brochure
www.telestone.com 28
Network Grouping
Telestone optical fiber repeater distribution system includes two connection
ways: point-to-point connection and point-multipoint connection.
Point-multipoint connection is divided into star connection and cascade
connection. The various connection ways is for different types of fiber optic
repeater distribution networks that could be used for providing flexible, reliable
signal coverage solutions in the areas that other indoor or outdoor wireless
repeaters can not cover such as remote villages and towns, mountainous
areas, freeways, airports, disperse buildings and subways.
Point-to-point connection:
Figure1 Star network connection:
Figure 2
Active Product Brochure
www.telestone.com 29
Cascade network connection:
Figure 3
In addition, Fiber optic repeaters (master) include: airborne fiber optic repeater and base station coupler fiber optic repeater. Airborne fiber optic repeater:
Figure4
Active Product Brochure
www.telestone.com 30
Base station coupling fiber optic repeater:
Figure5
Active Product Brochure
www.telestone.com 31
2.2 Product specifications
2.2.1 Fiber Optical Wide Band repeater
CDMA800
Long distance operation over single mode fiber Standard modularized design Excellent monitoring functions, Salve is monitored by master, support remote
monitoring and SNMP protocol One Optic Fiber is used for the transmission of UL and DL signal by using WDM Multi-power supply (AC,DC and solar power)
Master: TS-LTM01 800
Type Slave: TS-OR02LB 27 30 33 37 40 43
Master Operating frequency Uplink:824-849MHz;Downlink:869-894MHz
Monitoring mode Local(RS232);Remote(Wireless modem) (optional) Working
temperature -25-+55
Power supply 220V±20%,50/60Hz
Slave
Active Product Brochure
www.telestone.com 35
DCS1800
Long distance operation over single mode fiber Standard modularized design Excellent monitoring functions, Salve is monitored by master, support remote
monitoring and SNMP protocol One Optic Fiber is used for the transmission of UL and DL signal by using WDM Multi-power supply (AC,DC and solar power)
Master: TS-LTM01 1800
Type Slave: TS-OR03LDS 27 30 33 37 40 43
Master Operating frequency Uplink:1710-1785MHz;Downlink:1805-1880MHz
Monitoring mode Local(RS232);Remote(Wireless modem) Working
temperature -25-+55
Power supply 220V±20%,50/60Hz
Active Product Brochure
www.telestone.com 37
2.2.2 Fiber Optical GSM900 and GSM1800 Dual Band Repeater
GSM900 and GSM1800
Long distance operation over single mode fiber Standard modularized design Excellent monitoring functions, Salve is monitored by master, support remote
monitoring and SNMP protocol One Optic Fiber is used for the transmission of UL and DL signal by using WDM Multi-power supply (AC,DC and solar power)
Master: TS-LTM0103 GSM900 and DCS1800
Type Slave:TS-OR0103LB 27 30 33 37 40 43
Master
Operating frequency Uplink:890-915MHz;Downlink:935-960MHz; Uplink:1710-1785MHz;Downlink:1805-1880MHz
Full-duplex, two ports design, external power Small volume, easy to install ALC technology Low IMDB3 and spurious emissions Bandwidth can be customized
Type TS-MR01RB-10F TS-MR01RB-15F TS-MR01RB-20F TS-MR01RB-27F
frequency Uplink:890-915MHz;Downlink:935-960MHz Output power 10dBm 15dBm 20dBm 27dBm
Full-duplex, two ports design, external power Small volume, easy to install ALC technology Low IMDB3 and spurious emissions Bandwidth can be customized
Type TS-MR02RB-10F TS-MR02RB-15F TS-MR02RB-20F TS-MR02RB-27F
frequency Uplink:824-849MHz;Downlink:869-894MHz Output power 10dBm 15dBm 20dBm 27dBm
Full-duplex, two ports design, external power Small volume, easy to install ALC technology Low IMDB3 and spurious emissions Bandwidth can be customized
Type TS-MR03RB-10F TS-MR03RB-15F TS-MR03RB-20F TS-MR03RB-27F
frequency Uplink:1710- 1785MHz;Downlink:1805- 1880MHz(can be customized) Output power 10dBm 15dBm 20dBm 27dBm
Full-duplex, two ports design, external power Small volume, easy to install ALC technology Low IMDB3 and spurious emissions Bandwidth can be customized
Type TS-MR16RB-10F TS-MR16RB-15F TS-MR16RB-20F TS-MR16RB-27F
frequency Uplink:1850-1910MHz;Downlink:1930-1990MHz Output power 10dBm 15dBm 20dBm 27dBm
Full-duplex, two ports design, external power Small volume, easy to install ALC technology Low IMDB3 and spurious emissions Bandwidth can be customized
Type TS-MR07RB-10F TS-MR07RB-15F TS-MR07RB-17F TS-MR07RB-27F
frequency Uplink:1920-1980MHz;Downlink:2110-2170MHz Output power 10dBm 15dBm 17dBm 27dBm
Full-duplex, two ports design, external power Small volume, easy to install ALC technology Low IMDB3 and spurious emissions Bandwidth can be customized
Type TS-MR01RB2-15F TS-MR01RB2-20F TS-MR01RB2-27F
frequency Uplink:890-915MHz;Downlink:935-960MHz Bandwidth Can be customized Number of sub-bands 2
Output power 15dBm 20dBm 27dBm AGC ≥20dB Gain 65dB 70dB 75dB
Full-duplex, two ports design, external power Small volume, easy to install ALC technology Low IMDB3 and spurious emissions Bandwidth can be customized
Type TS-MR02RB2-15F TS-MR02RB2-20F TS-MR02RB2-27F
frequency Uplink:824-849MHz;Downlink:869-894MHz Bandwidth Can be customized Number of sub-bands 2
Output power 15dBm 20dBm 27dBm AGC ≥20dB Gain 65dB 70dB 75dB
Full-duplex, two ports design, external power Small volume, easy to install ALC technology Low IMDB3 and spurious emissions Bandwidth can be customized
Type TS-MR03RB2-15F TS-MR03RB2-20F TS-MR03RB2-27F
frequency Uplink:1710- 1785MHz;Downlink:1805- 1880MHz Bandwidth Can be customized Number of sub-bands 2
Output power 15dBm 20dBm 27dBm AGC ≥20dB Gain 65dB 70dB 75dB
Full-duplex, two ports design, external power Small volume, easy to install ALC technology Low IMDB3 and spurious emissions Bandwidth can be customized
Type TS-MR16RB2-15F TS-MR16RB2-20F TS-MR16RB2-27F
frequency Uplink:1850-1910MHz;Downlink:1930-1990MHz Bandwidth Can be customized Number of sub-bands 2
Output power 15dBm 20dBm 27dBm AGC ≥20dB Gain 65dB 70dB 75dB
Full-duplex, two ports design, external power Small volume, easy to install ALC technology Low IMDB3 and spurious emissions Bandwidth can be customized
Type TS-MR07RB2-15F TS-MR07RB2-17F TS-MR07RB2-27F
Frequency Uplink:1920-1980MHz;Downlink:2110-2170MHz Bandwidth Can be customized Number of sub-bands 2
Output power 15dBm 17dBm 27dBm AGC ≥20dB Gain 65dB 65dB 75dB
Perfect Electrical Performances Standard modularized design Excellent monitoring functions, inside back-up battery for monitoring 2 hours
at least Sealed casing, application in all-weather and various environment Multi-power supply (AC,DC and solar power)
Base station coupling Frequency shift repeater (Master) Type:TS-OR01~09S 33/M 37/M 40/M
Input Uplink:1438~1463MHz; Downlink: 935~960MHz Operating frequency Output Uplink:890~915 MHz; Downlink:1483~1508MHz Translating frequency 1.5GHz (Can be customized) Operating bandwidth Can be customized Frequency error ±5×10-8
Uplink -17dBm -17dBm -17dBm Output power (per channel) Downlink 33dBm 37dBm 40dBm Number of bands 1 AGC range 25dB Gain 53dB 57dB 60dB Gain adjustment range ≥30dB;1dB/step IMD3 ≤-40dBc Noise Figure ≤5dB (Uplink) Ripple in band ≤3dB Time delay ≤5μs
Out band rejection F(edge)±400kHz:≤-10dBc; F(edge)±600kHz: ≤-20dBc; F(edge)±1MHz :≤-50dBc; F(edge)±5MHz:≤-60dBc
Port impedance 50Ω VSWR ≤1.5
Safety input signal level Uplink : 0dBm; Downlink: 13dBm
Reflecting attenuation at RF port
> 16 dB
Audible noise < 3dB @ maximum output power Propagation delay <6 seconds Power consuming 100W 150W 200W Power supply 220V AC 220V AC 220V AC RF interface N(Female) Monitoring mode Local(RS232);Remote(Wireless modem GSM900)
Active Product Brochure
www.telestone.com 66
Wireless Frequency shift repeater (Master) Type:TS-OR01~09SR 33/MR 37/MR 40/MR
Input Uplink:1438~1463MHz; Downlink: 935~960MHz Operating frequency Output Uplink:890~915 MHz; Downlink:1483~1508MHz Translating frequency 1.5GHz (Can be customized) Operating bandwidth Can be customized Frequency error ±5×10-8
Uplink 27dBm 30dBm 33dBm Output power (per channel) Downlink 33dBm 37dBm 40dBm Number of Bands 1 AGC range 25dB Gain 83dB 87dB 90dB Gain adjustment range ≥30dB;1dB/step IMD3 ≤-40dBc Noise Figure ≤5dB (Uplink) Ripple in band ≤3dB Time delay ≤5μs
Out band rejection F(edge)±400kHz:≤-10dBc; F(edge)±600kHz: ≤-20dBc; F(edge)±1MHz :≤-50dBc; F(edge)±5MHz:≤-60dBc
Port impedance 50Ω VSWR ≤1.5
Safety input signal level Uplink : 0dBm; Downlink: 13dBm
Reflecting attenuation at RF port > 16 dB
Audible noise < 3dB @ maximum output power Propagation delay <6 seconds Weight 20kg 20kg 22kg Power consuming 100W 150W 200W Power supply 220V AC 220V AC 220V AC
Dimensions 580×410×234 mm 580×410×234 mm 630×410×234 mm
Case installation mode Waterproof/Wall installation(normal);Pole installation(optional)
Out band rejection F(edge)±400kHz:≤-10dBc; F(edge)±600kHz: ≤-20dBc; F(edge)±1MHz :≤-50dBc; F(edge)±5MHz:≤-60dBc
Port impedance 50Ω VSWR ≤1.5
Safety input signal level 11dBm
Reflecting attenuation at RF port > 16 dB
Audible noise < 3dB @ maximum output power Propagation delay <6 seconds Weight 20kg 20kg 22kg 22kg Power consumption 100W 150W 200W 250W
Power supply 220V±20%,50/60Hz
220V±20%,50/60Hz
220V±20%,50/60Hz
220V±20%,50/60Hz
Dimensions 220V±20%,50/60Hz 630×410×234 mm
Case installation mode Waterproof/Wall installation(normal) ; Pole installation(optional)
RF interface DIN 7/16 Female Monitoring mode Local(RS232);Remote(Wireless modem GSM900) Working temperature -25-+55
Active Product Brochure
www.telestone.com 68
4.2.2 Channel selective repeater
CDMA800
Perfect Electrical Performances Auto protection in case of self-excitation High selectivity for high adjacent channel rejection Excellent monitoring functions, inside back-up battery for monitoring 2 hours
at least Sealed casing, application in all-weather and various environment Multi-power supply (AC,DC and solar power)
Base station coupling Frequency shift repeater (Master) Type:TS-OR02~02C 33/M 37/M 40/M Operating frequency Uplink:824-849MHz;Downlink:869-894MHz Translating frequency Other channels of CDMA800 (Can be customized) Channel bandwidth 1.25MHz Frequency error ±5×10-8
Uplink -17dBm -17dBm -17dBm Output power (per channel) Downlink 33dBm 37dBm 40dBm Number of channels 2 (up to 4) AGC range 25dB Gain 53dB 57dB 60dB Gain adjustment range ≥30dB;1dB/step IMD3 ≤-40dBc Noise Figure ≤5dB (Uplink) Ripple in band ≤3dB Time delay ≤5μs
Out band rejection F(edge)±400kHz:≤-10dBc; F(edge)±600kHz: ≤-20dBc; F(edge)±1MHz :≤-50dBc; F(edge)±5MHz:≤-60dBc
Port impedance 50Ω VSWR ≤1.5
Safety input signal level Uplink : 0dBm; Downlink: 13dBm
Reflecting attenuation at RF port > 16 dB
Audible noise < 3dB @ maximum output power Propagation delay <6 seconds Weight 20kg 20kg 22kg Power consuming 100W 150W 200W Power supply 220V AC 220V AC 220V AC
Dimensions 580×410×234 mm
580×410×234 mm
630×410×234 mm
Case installation mode Waterproof/Wall installation(normal);Pole installation(optional)
Out band rejection F(edge)±400kHz:≤-10dBc;F(edge)±600kHz:≤-20dBc; F(edge)±1MHz :≤-50dBc; F(edge)±5MHz:≤-60dBc
Port impedance 50Ω VSWR ≤1.5
Safety input signal level 11dBm
Reflecting attenuation at RF port > 16 dB
Audible noise < 3dB @ maximum output power Propagation delay <6 seconds Weight 20kg 20kg 22kg 22kg Power consumption 100W 150W 200W 250W
Power supply 220V AC 220V AC 220V AC 220V AC
Dimensions 580×410×234 mm 630×410×234 mm
Case installation mode Waterproof/Wall installation(normal) ; Pole installation(optional)
RF interface DIN 7/16 Female Monitoring mode Local(RS232);Remote(Wireless modem GSM900)Working temperature -25-+55
Active Product Brochure
www.telestone.com 71
5. Trunk Amplifier
5.1 Overview
Trunk amplifier is mainly used in indoor distribution system to compensate the
cable loss of the signal; it is applicable to high building, airport, metro, tunnel,
hotel, expo center, shopping mall, etc.
Telestone’s trunk amplifier features high power and gain, low noise figure,
spurious emission and intermodulation, and with long service life.
It’s powerful centralized monitor and control system makes the user finding the
faulty part very easily, thereby reduces the cost of management and easy for
maintenance.
Active Product Brochure
www.telestone.com 72
5.2 CDMA800
Efficiently compensate the loss of signal transmitting in trunk cable Low Noise Figure Low ripple in band, make sure the signal stable The VSWR alarm function of downlink output-port, low power alarm function of
downlink input and output Modularization and compact design Perfect monitoring function Excellent MTBF
Model TS-IR02-30 TS-IR02-33 TS-IR02-37
uplink 824-849 824-849 824-849 Frequency range(MHz) downlink 869-894 869-894 869-894
Space between uplink and downlink(MHz) 45 45 45
Maximum gain(dB) 35 35 35
Gain adjustment range(dB) 20 20 20
uplink ≤3 ≤3 ≤3 Noise figure(dB)downlink ≤3 ≤3 ≤3
Ripple in band(dB) ≤1 ≤1 ≤1 Out of band rejection(dB) ≥70 ≥70 ≥70
Connector N type female N type female N type female
Impedance(Ω) 50 50 50 Working Temperature() -25~+55 -25~+55 -25~+55
Humidity 5%~95% 5%~95% 5%~95%
Voltage(V) AC220±20%/
50Hz or DC24/48V
AC220±20%/50Hz or DC24/48V
AC220±20%/50Hz or DC24/48V
Power consumption(W) 80 80 80
Active Product Brochure
www.telestone.com 73
5.3 GSM900
Efficiently compensate the loss of signal transmitting in trunk cable Low Noise Figure Low ripple in band, make sure the signal stable The VSWR alarm function of downlink output-port, low power alarm function of
downlink input and output Modularization and compact design Perfect monitoring function Excellent MTBF
Model TS-IR01-30 TS-IR01-33 TS-IR01-37
uplink 890~915 890~915 890~915 Frequency range(MHz) downlink 935~960 935~960 935~960 Space between uplink and
Ripple in band(dB) ≤1 ≤1 ≤1 Out of band rejection(dB) ≥70 ≥70 ≥70
uplink 0 0 0 Output power(dBm) downlink 33 30 37
VSWR ≤1.4 ≤1.4 ≤1.4
Time delay(μs) <1.5 <1.5 <1.5 9K~1G ≤-36 ≤-36 ≤-36 Spurious
emission(dBm)
1G~12.75G ≤-30 ≤-30 ≤-30
in working band ≤-50dBc ≤-50dBc ≤-50dBc
Intermodulation out of
band rejection
≤-36dBm ≤-36dBm ≤-36dBm
Working temperature -25~+55 -25~+55 -25~+55
Voltage(V) AC220±20%/50Hz or DC24/48V
AC220±20%/50Hz or DC24/48V
AC220±20%/50Hz or DC24/48V
Active Product Brochure
www.telestone.com 74
5.4 GSM1800
Efficiently compensate the loss of signal transmitting in trunk cable Low Noise Figure Low ripple in band, make sure the signal stable The VSWR alarm function of downlink output-port, low power alarm function of
downlink input and output Modularization and compact design Perfect monitoring function Excellent MTBF
Model TS-IR03-30 TS-IR03-33 TS-IR03-37
uplink 1710~1785 1710~1785 1710~1785 Frequency range(MHz) downlink 1805~1880 1805~1880 1805~1880
solutions for 800/900/1800/2100MHz wireless networks provide uplink
amplification, supporting both uplink and downlink channels. With high
performance, low-noise amplifiers built-in, TMA solutions can create network
link balance and improve the receiving sensitivity of base station.
TMA is installed underneath the receiving antenna to improve the UL sensitivity
and amplify the weak signal from the MS. Then the amplified signal is
transmitted to the base station receiver. The output of every carrier is the input
of base station amplifier which is located in the machine room. Then the
signals are combined and transmitted by the duplex antenna.
6.1 Technical Features
Easy installation enabling rapid launch of network
Cost-effective solution to decrease network infrastructure expense
High performance with RF bypass function for high reliability
Support warning function
Lightweight and compact design
6.2 Main Functions
Expand coverage range of base station and increase traffic volume
improve call quality and therefore extend handset battery life
Improve the balance of uplink and downlink gain, and the uplink
connection quality
Increase the base station Signal-to-noise ratio, cut down transmitting
power of handsets
Save cost of investing
Active Product Brochure
www.telestone.com 76
6.3 Technical Specification
CDMA800
CDMA800 Simplex TMA
Advanced filtering technology Perfect out of band control Continuously adjustable power and gain Light weight and small volume Modularization and compact design Automatic bypass protection Lighting protection
CDMA800 TMA Type: TS-ITA02-12 Specifications:
Item Specification Nominal value
working frequency 824—849MHz Gain ≥12dB 1dB continuous variable preset before leaving factory Intermodulation attenuation ≥65dBc
ripple in band ≤1dB noise figure ≤1.8dB VSWR ≤1.4 bypass insertion loss ≤1.5dB
Uplink
spurious emission comply with CDMA800 standard maximum power +20 dBmRx
bypass function automatic bypass when over power or power cut
NMS, alarm function enable to access into base station precaution system to realize intelligent control and automatic alarm
Power supply DC+12V working temperature -40C°~+65C° Humidity 5%~95% package standard comply with IP68 standard Protection lightning protection
Electrical specifications
MTBF 100000h Dimension 270*190*190mm Mechanical
specifications Connector N Female
Active Product Brochure
www.telestone.com 77
CDMA800 Duplex TMA
Advanced filtering technology Perfect out of band control Continuously adjustable power and gain Light weight and small volume Modularization and compact design Automatic bypass protection Lighting protection
CDMA800 TMA Type: TS-ITA02S-12 Specifications:
Frequency range 824-849MHZ, VSWR, max. ≤1.4 Nominal gain 12Db±1 Passband ripple ±0.5dB Noise figure, typical ≤1.8dB Tx-band rejection, relative to gain l l
80 Output 3rd order Intercept Point (IP3)
+25dBm
Insertion loss bypass mode <1.7dB (Better)
Uplink
Supply voltage, fed via the RF bl
12 VDC Frequency range 869-894MHZ Insertion loss, typical 0.5+_0.1 VSWR, max. ≤1.4 Rx-rejection >60dB (Better) Average operating power, max. 53dBm
Downlink
Intermodulation products, max. -140dBc MTBF 50000h Alarm function Two levels automatic by-pass Miscellaneou
s EMC and safety approvals ETS 300 342-3 Weight 7.5Kg Dimensions 270*190*190MM Housing Aluminium Antenna connector (see figure) DIN(F) Receiver connector (see figure) DIN(F) Mounting kit Plate andV-Bracketsin
l i d t lM8
Mechanical Data
Operating temperature range -40 to +60 Weather protection IP 65. Environment
al Data Lightning protection 50kA,IEC 1312-1
Active Product Brochure
www.telestone.com 78
CDMA800 TMA twin
Advanced filtering technology Perfect out of band control Light weight and small volume Modularization and compact design Automatic bypass protection Twin technology offering two TMAs in one
housing
CDMA800 TMA twin Type: TS-ITA02S2-12 Specifications: Number of channels 2
Frequency range 824-849MHZ, VSWR, max. ≤1.4 Nominal gain ≥11dB Passband ripple ±0.5dB Noise figure, typical ≤1.8dB Tx-band rejection, relative to gain l l
80 Output 3rd order Intercept Point (IP3)
+25dBm
Insertion loss bypass mode <1.7dB (Better)
Uplink
Supply voltage, fed via the RF bl
12 VDC Frequency range 869-894MHZ Insertion loss, typical 0.5+_0.1 VSWR, max. ≤1.4 Rx-rejection >60dB (Better) Average operating power, max. 53dBm
Downlink
Intermodulation products, max. -140dBc MTBF 50000h Alarm function Two levels automatic by-pass Miscellaneou
s EMC and safety approvals ETS 300 342-3 Weight 6.5Kg Dimensions 186*300*77MM Colour Grey Housing Aluminium Antenna connector (see figure) DIN(F)
Mechanical Data
Receiver connector (see figure) DIN(F) Operating temperature range -40 to +60 Weather protection IP 65. Environmenta
l Data Lightning protection 50kA,IEC 1312-1
Active Product Brochure
www.telestone.com 79
GSM900
GSM900 Simplex TMA
Advanced filtering technology Perfect out of band control Continuously adjustable power and gain Light weight and small volume Modularization and compact design Automatic bypass protection Lighting protection
GSM900 TMA Type: TS-ITA01-12 Specifications:
Item Specification Nominal value
Working frequency 890—915MHz Gain 12dB-14dB 1dB continuous variable preset before leaving factory
Intermodulation attenuation ≥65dBc
ripple in band ≤1dB noise figure ≤1.8dB VSWR ≤1.4 bypass insertion loss ≤1.5dB
Uplink
spurious emission comply with GSM900 standard maximum power +20 dBmRx
bypass function automatic bypass when over power or power cut
NMS, alarm function enable to access into base station precaution system to realize intelligent control and automatic alarm
power supply DC+12V working temperature -40C°~+65C° Humidity 5%~95% package standard comply with IP65 standard Protection lightning protection
Electrical specifications
MTBF 100000h Dimension 270*190*190mm
Weight 5Kg Mechanical specifications
Connector N Female
Fittings power supply alarm unit
Active Product Brochure
www.telestone.com 80
GSM900 Duplex TMA
Advanced filtering technology Perfect out of band control Continuously adjustable power and gain Light weight and small volume Modularization and compact design Automatic bypass protection Lighting protection
GSM900 TMA Type: TS-ITA01S-12 Specifications:
Frequency range 890-915MHZ, VSWR, max. ≤1.4 Nominal gain ≥12dB Passband ripple ±0.5dB Noise figure, typical ≤1.8dB Tx-band rejection, relative to gain level
80dB
Output 3rd order Intercept Point (IP3)
+25dBm
Insertion loss bypass mode <1.7dB (Better)
Uplink
Supply voltage, fed via the RF bl
12 VDC Frequency range 935-960MHZ Insertion loss, typical 0.5+_0.1 VSWR, max. ≤1.4 Rx-rejection >60dB (Better) Average operating power, max. 53dBm
Downlink
Intermodulation products, max. -140dBc MTBF 50000h Alarm function Two levels automatic by-pass Miscellaneou
s EMC and safety approvals ETS 300 342-3 Weight 7.5Kg Dimensions 270*190*190MM Colour Grey Housing Aluminium Antenna connector (see figure) DIN(F)
Mechanical Data
Receiver connector (see figure) DIN(F) Operating temperature range -40 to +60 Weather protection IP 65. Environmenta
l Data Lightning protection 50kA,IEC 1312-1
Active Product Brochure
www.telestone.com 81
GSM900 TMA twin
Advanced filtering technology Perfect out of band control Light weight and small volume Modularization and compact design Automatic bypass protection Twin technology offering two TMAs in one housing
GSM900 TMA Type: TS-ITA01S2-12 Specifications:
Number of channels 2 Frequency range 890-915MHZ, VSWR, max. ≤1.4 Nominal gain ≥11dB Passband ripple ±0.5dB Noise figure, typical ≤1.8dB Tx-band rejection, relative to
i80
Output 3rd order Intercept Point (IP3)
+25dBm
Insertion loss bypass mode <1.7dB (Better)
Uplink
Supply voltage, fed via the RF bl
12 VDC Frequency range 935-960MHZ Insertion loss, typical 0.5+_0.1 VSWR, max. ≤1.4 Rx-rejection >60dB (Better) Average operating power, max. 53dBm
Downlink
Intermodulation products, max. -140dBc MTBF 50000h Alarm function Two levels automatic by-pass Miscellaneou
s EMC and safety approvals ETS 300 342-3 Weight 7.5Kg Dimensions 270*190*190MM Color Grey Housing Aluminium Antenna connector (see figure) DIN(F) Receiver connector (see figure) DIN(F)
Plate and V-Bracketsin
Mechanical Data
Mounting kit M8
Operating temperature range -40 to +60 Weather protection IP 65. Environmenta
l Data Lightning protection 50kA,IEC 1312-1
Active Product Brochure
www.telestone.com 82
GSM1800
GSM1800 Simplex TMA
Advanced filtering technology Perfect out of band control Continuously adjustable power and gain Light weight and small volume Modularization and compact design Automatic bypass protection Lighting protection
GSM1800 TMA Type: TS-ITA03-12 Specifications:
Item Specification Nominal value
working frequency 1710—1785MHz Gain 12dB-14dB
1dB continuous variable preset before leaving factory
Intermodulation attenuation ≥65dBc
ripple in band ≤1dB Noise figure ≤1.8dB
VSWR ≤1.4 bypass insertion loss ≤1.5dB
Uplink
spurious emission comply withGSM1800 standard maximum power +20 dBmRx
bypass function automatic bypass when over power or power cut
NMS, alarm function enable to access into base station
precaution system to realize intelligent control and automatic alarm
power supply DC+12V working temperature -40C°~+65C°
Humidity 5%~95% package standard comply with IP65 standard
Protection lightning protection
Electrical
specifications
MTBF 100000h dimension
270*190*190mm
Weight 5Kg Mechanical
specifications
Connector N Female
Fittings power supply alarm unit
Active Product Brochure
www.telestone.com 83
GSM1800 Duplex TMA
Advanced filtering technology Perfect out of band control Continuously adjustable power and gain Light weight and small volume Modularization and compact design Automatic bypass protection Lighting protection
GSM1800 TMA Type: TS-ITA03S-12 Specifications:
Frequency range 1710-1785MHz VSWR, max. ≤1.4 Nominal gain ≥12dB Passband ripple ±0.5dB Noise figure, typical ≤1.8dB Tx-band rejection, relative to gain l l
80 Output 3rd order Intercept Point (IP3)
+25dBm
Insertion loss bypass mode <1.7dB (Better)
Uplink
Supply voltage, fed via the RF bl
12 VDC Frequency range 1805-1880MHZ Insertion loss, typical 0.5+_0.1 VSWR, max. ≤1.4 Rx-rejection >60dB (Better) Average operating power, max. 53dBm
Downlink
Intermodulation products, max. -140dBc MTBF 50000h Alarm function Two levels automatic by-pass Miscellaneou
s EMC and safety approvals ETS 300 342-3 Weight 7.5Kg Dimensions 270*190*190MM Colour Grey Housing Aluminium Antenna connector (see figure) DIN(F)
Mechanical Data
Receiver connector (see figure) DIN(F) Operating temperature range -40 to +60 Weather protection IP 65. Environmenta
l Data Lightning protection 50kA,IEC 1312-1
Active Product Brochure
www.telestone.com 84
6.5 Accessories
Current Injector
Frequency Range The same as that of TMA Return Loss >18 dB Insertion Loss 0.3 dB Average operating power 200W DC current. Max 1.0A
Electrical Data
Intermodulation Products 140dBC Size W * H *D 39*39*107 mm Weight 0.45KG Color silver plating Housing zinc alloy RF-Connectors DIN 7/16 Female on BS
and Male on Antenna side
Mechanical Data
DC Power Supply Connector SMB male Temperature range -40 to +70 Environmental
Data MTBF >100000 Hours Safety EN 609 50 ETL Environmental IEC 1312-1 Approvals &
Tests EMC ETS 300 342-3
Current Injector Power Distribution unit
Active Product Brochure
www.telestone.com 85
Power Distribution unit
Input Voltage -44 V to + 52 V Input Current, max 1A No of TMA output ports 2 Output Voltage +12V (6 outlets) Output Current Max 375 mA / port Output Protection Automatic short circuit
potection, auto recovery Alarm Functionality low current/high current open circuit/short circuit
Electrical Data
Sum alarm output port Relay normallyopen and normally closed
Size W * H *D 319*45*135(mm) Weight 1055g Housing Aluminium Input Voltage connector 3 pole connector Output Connector SMA Alarm output connector 2 pole connector Output Voltage Indicator Green when ok Output port current indicator, one
tGreen when ok
Temperature range -40 - +70 MTBF 100000Hours
Mechanical Data
Humidity 5~95% Safety EN 609 50 ETL Environmental IEC-1312-1
NEMA4(Retlif verified) Approvals & Tests
EMC ETS 300 342-3
Active Product Brochure
www.telestone.com 86
7. Tower Mounted Booster
7.1 Production overview
Dedicated to the radio signal coverage of GSM Network, there is always
obvious contradiction between coverage and capacity. On the one hand,
network has superfluous system capacity but low coverage range makes rural
open areas, where deploy single carrier and high antenna BS, cost more
investment for operators, On the other hand, high antenna brings on high radio
signal feeder transmitting loss and output power waste. If operator would
enlarge the coverage range of BS and BS implements multi-carriers
applications, the application of TMB will reduce the unnecessary cost of BS
investments.
For the coverage extension system of GSM BS, we provide Tower Mounted
Booster (TMB) for GSM system which can improve the downlink output power
and uplink receiving sensitivity. TMB is one of best serial coverage extension
product for digital cell system. It has full duplex linear power amplifier in uplink,
comprised of uplink LNA (low noise amplifier) which increases the gain of
uplink signal and makes base station getting higher receiving sensitivity; and in
downlink high gain power amplifier which amplify the downlink signal then
transmit the signal to antenna through RF feeder cable, which will enlarge the
BS coverage range at same time.
TMB will enlarge the coverage range by 2-4 times. Product characteristics:
Uplink and downlink gain continuous tunable
High reliability, stability, automatic level control
Low noise figure
Feed mode power supply, convenience installation
Automatic bypass protection, power supply abnormity bypass, over signal
level bypass and alarm.
Forward & Backward power protection and over temperature protection.
Water, fog, shocking resistance
Active Product Brochure
www.telestone.com 87
Lighting protection
System Structure
Duplexer
Duplexer
RX TX
TRX
TMB
Antenna
+24Vpower supply
TX BS
Active Product Brochure
www.telestone.com 88
7.2 Specifications
CDMA800 TMB
Adjustable uplink and downlink gains can meet different coverage requirements
High reliability and stability with adjustable power Low noise figure Feed mode power supply, easy and convenient to
install Automatic bypass protection Dustproof, waterproof and shockproof design
CDMA800 TMB
Type: TS-ITA02B-12/46
Specifications: Pass band Rx (Uplink) 824-849MHz Pass band Tx (Downlink) 869-894MHz
Bandwidth Tx and Rx 45MHz Input & Output Impedance 50
Noise Figure typical mid band <2.0. dB
Uplink output power ≥10dBm
Downlink output power 45±2 dBm
Rx Gain 12±2 dB
Tx Gain 12±2 dB
Ripple in band < 3 dB (P-P)
Bypass insertion loss <2.0.dB VSWR, all ports ≤1.5
Gain adjustment range 7±1 dB
DC supply voltage DC+24V DC Power Supply (standard) -48v Body Temperature Range -40 - +55 Environmental Rating IP-65 RF Connectors N female
Adjustable uplink and downlink gains can meet different coverage requirements
High reliability and stability with adjustable power Low noise figure Feed mode power supply, easy and convenient to install Automatic bypass protection Dustproof, waterproof and shockproof design
GSM900 TMB
Type: TS-ITA01B-12/46
Specifications: Pass band Rx (Uplink) 890-915MHz Pass band Tx (Downlink) 935-960MHz
Bandwidth Tx and Rx 45MHz Input & Output Impedance 50
Noise Figure typical mid band <2.0. dB
Uplink output power ≥10dBm
Downlink output power 45±2 dBm
Rx Gain 12±2 dB
Tx Gain 12±2 dB
Ripple in band < 3 dB (P-P)
Bypass insertion loss <2.0.dB VSWR, all ports ≤1.5
Gain adjustment range 7±1 dB
DC supply voltage DC+24V DC Power Supply (standard) -48v Body Temperature Range -40 - +55 Environmental Rating IP-65 RF Connectors N female
Adjustable uplink and downlink gains can meet different coverage requirements
High reliability and stability with adjustable power Low noise figure Feed mode power supply, easy and convenient to install Automatic bypass protection Dustproof, waterproof and shockproof design
GSM1800 TMB
Type: TS-ITA03B-12
Specifications: Pass band Rx (Uplink) 1710-1785MHz Pass band Tx (Downlink) 1805-1880MHz
Bandwidth Tx and Rx 95MHz Input & Output Impedance 50
Noise Figure typical mid band <2.0. dB
Uplink output power ≥10dBm
Downlink output power 45±2 dBm
Rx Gain 12±2 dB
Tx Gain 16±2 dB
Ripple in band < 3 dB (P-P)
Bypass insertion loss <2.0.dB VSWR, all ports ≤1.5
Gain adjustment range 7±1 dB
DC supply voltage DC+24V DC Power Supply (standard) -48v Body Temperature Range -40 - +55 Environmental Rating IP-65 RF Connectors N female
Automatically bypass protection and remote alarm function
Power indication with high or low out-put power indication
Modularization , miniaturization design, easy installation and maintenance
Separately amplify ,easy extension, no limit to the carrier number
Advanced filtering technology ,perfect out of band rejection
High power,high stability, power and gain continuous tunable
With local and remote monitoring function,monitor control running status
at any time
Active Product Brochure
www.telestone.com 93
Base Station Power Amplifier
Active Product Brochure
www.telestone.com 94
8.3 Technical Specifications
CDMA 800(100W)
AGC technology, auto protection in case of self-excitation Easy installation and maintenance High efficiency and reliability Alarm indication port, directly access base station back-up alarm port Remote monitoring system (optional)
Item specification nominal value
working frequency 869—894MHz
number of carrier 1(can upgrade to 4)
output power(max) 50 dBm
maximum gain 12dB
frequency error ≤0.01ppm
RMS phase error ≤1°
ripple in band ≤1dB
VSWR ≤1.3
bypass insertion loss ≤1.5dB intermodulation
attenuation ≥70dBc
Specifications
Spurious emission Comply with CDMA standard
maximum power 20W/ch
bypass function automatic bypass when over power or power cut
NMS, alarm function
enable to access into base station precaution system to realize intelligent control and
automatic alarm
power supply AC200V DC-48V
working temperature -25C°~+55C°
Humidity 5%~95%
Package standard comply with IP65 standard
Protection lightning protection
Electrical specifications
MTBF 50000h dimension
1060x560x650mm
Weight 150Kg Mechanical
specifications Connector 7/16DIN
Fittings four jumper
Active Product Brochure
www.telestone.com 95
GSM900 (100W)
AGC technology, auto protection in case of self-excitation Easy installation and maintenance High efficiency and reliability Alarm indication port, directly access base station back-up alarm port Remote monitoring system (optional)
Item Specification nominal value
working frequency 935—960MHz
number of carrier 1(can upgrade to 4)
output power(max) 50 dBm
maximum gain 12dB
Frequency error ≤0.01ppm
RMS phase error ≤1°
ripple in band ≤1dB
VSWR ≤1.3
bypass insertion loss ≤1.5dB intermodulation
attenuation ≥70dBc
Specification
spurious emission comply with GSM standard
maximum power 20W/ch
bypass function automatic bypass when over power or power cut
NMS, alarm function
enable to access into base station precaution system to realize
intelligent control and automatic alarm
power supply AC200V DC-48V
working temperature -25C°~ +55C°
Humidity 5%~95%
package standard comply with IP65 standard
Protection lightning protection
Electrical specifications
MTBF 50000h Dimension
1060x560x650mm
Weight 150Kg Mechanical
specifications Connector 7/16DIN
Fittings four jumper
Active Product Brochure
www.telestone.com 96
GSM900, GSM800 (200W)
AGC technology, auto protection in case of self-excitation Easy installation and maintenance High efficiency and reliability High Power for larger coverage Alarm indication port, directly access base station back-up alarm port Remote monitoring system (optional)
TS-OBTO1-53 Frequency Range: Uplink: 890~915MHz ;824~849MHz;
Downlink: 935~960MHz;869~894MHz Power gain Min: 12dB ; typical:13dB ; max: 14dB Number of Carrier Frequency:
MBTF >50 thousand hours Note: when the input power is higher than 50W, the base station amplifier will over loaded and be damaged. The optimal input power is the one that makes the output power up to the rating power.