Acrylic varnish - mathyspaints.eu · Solvent based acrylic varnish. RECOMMENDED USE Protection of non-ferrous metals; renovation of transparent skylights (except for polycarbonate).

VERNAC GLOSS

Acrylic varnish

WWW.MATHYSPAINTS.EU

Alkaliresistant

Excellent flexibility

High weather resistance

Transparent

Completely colourless

VERNAC GLOSSDESCRIPTIONSolvent based acrylic varnish.

RECOMMENDED USEProtection of non-ferrous metals; renovation of transparent skylights (except forpolycarbonate). Do not apply Vernac Gloss as floor varnish or on places that are subject tomechanical pressure.

TECHNICAL DATADensity (g/cm³): 0,96 - 0,98Gloss Level: GlossGloss level at 60º: Glossy: > 90%Solids Content in weight: 47 - 49 %Solids content in volume: 40 - 43 %

DRY TIMES BY 20º C/RV 50%Touch dry: 1 hourDry to handle: 1,5 hoursDry to recoat: 4 hoursFully cured: 1 day

RECOMMENDED WET FILM THICKNESS100 µm

RECOMMENDED DRY FILM THICKNESS42 µm

THEORETICAL CONSUMPTION10 - 15 m²/l per coat

PRACTICAL CONSUMPTIONPractical coverage depends on many factors such as porosity and roughness of the substrateand material losses during application.

SURFACE PREPARATIONThe substrates must be completely dry and clean. On metals, it is necessary to remove oldvarnish layers (with Rapid Super, for instance) and oxidation traces (with a polish, forinstance). Clean afterwards with a cloth soaked in Thinner 22.

DIRECTIONS FOR USETo ensure homogeneity, coating materials should be thoroughly stirred prior to use.

APPLICATION CONDITIONSMinimum temperature 5°C, maximum temperature 35°C and maximum relative humidity80%.No condensation during drying time. Low temperatures and/or high relative humidity willextend the drying time. The temperature of the substrate should be 3°C above dew point.

APPLICATION & THINNING: BRUSHAll types.

APPLICATION & THINNING: ROLLERMohair paint roller or short haired roller.

CLEANING OF EQUIPMENT / SPILLSThinner 22.

REMARKS2 - 3 coats for outside works.

SAFETY DATAVOC level: 499 g/lVOC readymix: 499 g/lVOC category: A/iVOC limit: 500 g/lRemarks regarding safety:

Consult Safety Data Sheet and Safety Informationprinted on the can.

SHELF LIFE5 years from date of production in unopened cans, if stored in dry, well ventilated areas, notin direct sunlight at temperatures between 5° and 35°C.

Available colours & pack sizes: Please refer to the respective product page on www.rust-oleum.eu for an overview of actual available colours and pack sizes.

Disclaimer: The information contained herein is to the best of our knowledge true and accurate and is given in good faith but without warranty. The user will be deemed to have satisfied him/herself independentlyas to the suitability of our products for his/her own particular purpose. In no event shall Rust-Oleum Europe be liable for consequential or incidental damages. Products must be stored, handled, and applied underconditions complying with Rust-Oleum Europe recommendations detailed within the latest copy of the product data sheet. It is the users responsibility to ensure that they have the current copy. Latest copies of theproduct data sheet is available for free and downloadable from www.rust-oleum.eu or upon a request to our Customer Services department. Rust-Oleum Europe reserves the right to change the properties of its’products without prior notification.

Rust-Oleum Netherlands B.V.Zilverenberg 165234 GM 's-HertogenboschThe NetherlandsT : +31 (0) 165 593 636F : +31 (0) 165 593 [email protected]

Tor Coatings Ltd (Rust-Oleum Industrial)Shadon Way, Portobello Ind. EstateBirtley, Chester-le-StreetDH3 2RE United KingdomT : +44 (0)1914 113 146F : +44 (0)1914 113 [email protected]

Rust-Oleum France S.A.S.38, av. du Gros Chêne95322 HerblayFranceT : +33(0) 130 40 00 44F : +33(0) 130 40 99 [email protected]

N.V. Martin Mathys S.A.Kolenbergstraat 233545 ZelemBelgiumT : +32 (0) 13 460 200F : +32 (0) 13 460 [email protected]

Date issued: 20/08/2020

WWW.MATHYSPAINTS.EU