7/27/2019 ace-202
1/14
ACE-202/2002/2002EPhase 3.1
7/27/2019 ace-202
2/14
master.ppt Slide 2
ACE-202 / 2002 / 2002EPhase 3.1
3 Separate Routers
Inverse ATM ARP (RFC 2225)
In-Band Management via the LAN Module
Multiple IMA groups and UNI mode on Slot #1
Cross Connect between ports of Dual STM-1/OC-3C
Dual STM-1/OC-3C in Slot #1 (as well as other
slots)
Dual-port LAN bridge module for ACE-2002E
Single port CES module
New
Features
NewModules
7/27/2019 ace-202
3/14
master.ppt Slide 3
ACE in RouterMode
3 Routers
100 BaseFX (Fiber)
Router
Customers
Premises
CO/POP
CustomersPremises
Customers
Premises
100 BaseFX (Fiber)
100 BaseFX (Fiber)
ATM
Remote Site
Router
Router
Remote Site
Remote Site
Remote Site
Remote Site
Remote Site
7/27/2019 ace-202
4/14
master.ppt Slide 4
Inverse ATM ARP (RFC 2225)
Benefits Automatically learn IP addresses of remote devices
Routing can be done per IP (rather than per network
address)
Features Create several VCCs on the same IP interface
Available on multiple Routers
Up to 127 interfaces (LIS or Router Interfaces) per
Router
Unlimited number of VCCs assigned to each LIS
Inverse ATM ARP support per VCC
Static definitions support for VC inside a LIS on a per
VC Basis
7/27/2019 ace-202
5/14
master.ppt Slide 5
Inverse ATM ARP (RFC 2225)
1.1.1.0
2.2.2.0
1.1.1.1
1.1.1.2
2.2.2.1
2.2.2.2
Logical IP Subnetworks (LIS)
LAN VCs
ACE
ATM
7/27/2019 ace-202
6/14
master.ppt Slide 6
In-band Management via LAN
Benefit
Use the user LAN port for both, user traffic and
management traffic (for managing the ACE)
Feature
Each LAN port can be manageable from the LAN side
along with routing/bridging of user traffic
Notes
One management connection is available per bridge
The feature is available on both Router and Bridge
mode
Can be used in VLAN environment
7/27/2019 ace-202
7/14master.ppt Slide 7
In-band Management via LAN
NMS
ManagementTraffic
ACESwitch
Switch
Switch
ATM
Users LAN
LAN Port
UserTraffic
ATM Port
LAN
Switch
7/27/2019 ace-202
8/14master.ppt Slide 8
In-band Management via LAN
NMS
ACE
ATM
ACE
ACE
ACE
ACE
ACE
ManagementTraffic on Bridged PDU
7/27/2019 ace-202
9/14master.ppt Slide 9
Dual LAN Module
Separate bridge per port, no local switching
Bridging functionality same as on single-port LAN
Constrains
Router mode is currently not available
In case of installing a Dual LAN instead of Single LAN card the
configuration is deleted
Available on ACE-2002E only!
7/27/2019 ace-202
10/14master.ppt Slide 10
Switch Switch
Switch
ACE-2002E
ATM
LAN
Switch
100 BaseFX (Fiber)
Customers
Premises
CO/POP
LAN Concentration using Dual LANModule
7/27/2019 ace-202
11/14master.ppt Slide 11
ATM Enhancements
Multiple IMA groups and UNI mode on Slot #1
Support for Dual STM-1 in Slot 1 (in previous versions
it was only supported in slots 2, 3 and 4)
Cross-Connect between ports of Dual STM-1
All of these enhancements are available on ACE-
2002 and ACE-2002E only!
7/27/2019 ace-202
12/14master.ppt Slide 12
Cellular Backhauling using DualSTM-1 in Slot #1
ACE-2002E
Cost effective solution for aggregating up to 20 E1/T1 ports
Port granularity of 4E1/T1s
Scalable daisy chaining
Flexible IMA/UNI per port
Multi-featured
Traffic Management
Performance Monitoring
In-band/Out of Band management
ACE-2002E
STM-1/OC3, E3/T3, IMA
4, 8, 16 or
20 E1/T1ATM
Network
ACE-2002E
BTS/Node B
BTS/Node B
7/27/2019 ace-202
13/14master.ppt Slide 13
Additional Features
CRC Protection
Alarm Events
Display the number of active LB/CC connections
OAM configuration added to VC group menu LB Failure Alarm
Bandwidth Management
7/27/2019 ace-202
14/14master ppt Slide 14
Bandwidth Management
Input and Output rate configuration for:
STM-4
Dual STM-1
New LAN (single and dual)
Enable/Disable Traffic in modules with fixedInput/Output rate.
Total bandwidth calculation and over allocation
notification for both input and output rates.
Bandwidth over-allocation is not configurable