www.twrs.com Toll Free: 800.621.2777 Email: [email protected]TANK PRESSURE INLET PRESSURE BLAST PRESSURE ACCUSTRIP SYSTEM HOSE ASSEMBLIES, 11SX PARTS MODEL DESCRIPTION PART NO. BLAST HOSE Complete blast hose assemblies include base blast hose with nozzle holder and coupling, water line and ASSEMBLIES deadman control lines with deadman valve pre-assembled. Will connect to any SX model Accustrip System. 11SX 5/8" blast hose assemblies have ¾" nozzle holder threads and are recommended for use with #3 and #4 size nozzles. Blast hose assembly 5/8" x 25'. For model 11SX with standard pneumatic controls. 12SX or 13SX 1" blast hose assemblies have 50mm nozzle holder threads and are recommended for use with #6 and #8 size nozzles. 1¼" blast hose assemblies have 50mm nozzle holder threads and are recommended for use with #8 and #10 nozzles. 12SX Blast hose assembly 1" x 25'. Standard pneumatic controls. 12SX or 13SX Blast hose assembly 1" x 50'. Standard pneumatic controls. Blast hose assembly 1¼" x 50'. Standard pneumatic controls. EXTENSION Complete extension blast hose assemblies include base blast hose with couplings, water line and deadman BLAST HOSE control lines pre-assembled. Will connect to any SX model Accustrip System and any SX type blast hose ASSEMBLIES assembly. Blast hose extension assemblies fit between the blast hose assembly (harness) and the SX model Accustrip System, to extend the reach of the nozzle from the Accustrip System ® (blast pot). 12SX or 13SX Extension blast hose assembly 1" x 25'. Standard pneumatic controls. Extension blast hose assembly 1" x 50'. Standard pneumatic controls. Extension blast hose assembly 1¼" x 50'. Standard pneumatic controls. 8710-22117 8710-70125 8710-70100 8710-70101 8710-80126 8710-90028 8710-90023 Axxiom Manufacturing Co., Inc. • 800-231-2085 • fax 888-600-3300 • www.AxxiomMfg.com 8710-40007A: Pressure gauge, 0-160 psi 8710-17024: Wheel 11SX 8710-22104: Axle spacer 11SX 8710-98695: Axle 11SX 8710-22110: Ball valve 3/8" 4244-502-02: Branch tee ¼" FNPT x ¼" flare 4203-502-02: Fitting ¼" MNPT x ¼" flare 90 o 8710-92302: Drain cock 1/8" 8710-95331: Inlet air valve/choke valve 11SX 7019-511: Nut ½" -13 nylon insert 4102-006: Hose 1" red (per foot) (left to right) 7030-001: Label tag inlet pressure 7030-002: Label tag tank pressure 7030-003: Label tag blast pressure 4214-108-01: Hose coupling 1½" FNPT 4209-105: Crowfoot, 2-lug, ¾" 2302-205-50: Air filter 11SX 8710-98660: Blast pressure regulator 11SX 8710-98661: Moisture eliminator 11SX 11SX Parts, 1.0 cu. ft. Vessel with ¾" Piping
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
BLAST HOSE Complete blast hose assemblies include base blast hose with nozzle holder and coupling, water line andASSEMBLIES deadman control lines with deadman valve pre-assembled. Will connect to any SX model Accustrip System.
11SX 5/8" blast hose assemblies have ¾" nozzle holder threads and are recommended for use with #3 and #4size nozzles.
Blast hose assembly 5/8" x 25'. For model 11SX with standard pneumatic controls.
12SX or 13SX 1" blast hose assemblies have 50mm nozzle holder threads and are recommended for use with #6 and #8 size nozzles. 1¼" blast hose assemblies have 50mm nozzle holder threads and are recommendedfor use with #8 and #10 nozzles.
12SX Blast hose assembly 1" x 25'. Standard pneumatic controls.
12SX or 13SX Blast hose assembly 1" x 50'. Standard pneumatic controls.
Blast hose assembly 1¼" x 50'. Standard pneumatic controls.
EXTENSION Complete extension blast hose assemblies include base blast hose with couplings, water line and deadmanBLAST HOSE control lines pre-assembled. Will connect to any SX model Accustrip System and any SX type blast hoseASSEMBLIES assembly. Blast hose extension assemblies fit between the blast hose assembly (harness) and the SX model
Accustrip System, to extend the reach of the nozzle from the Accustrip System® (blast pot).
12SX or 13SX Extension blast hose assembly 1" x 25'. Standard pneumatic controls.
Extension blast hose assembly 1" x 50'. Standard pneumatic controls.
Extension blast hose assembly 1¼" x 50'. Standard pneumatic controls.