American Lumber Standard Committee, Incorporated® T.F. Brodie, Chairman 7470 New Technology Way, Suite F L.N. Belden, Vice Chairman Frederick, Maryland 21703 J.A. Brochu, Treasurer Telephone: 301.972.1700 D.E. Kretschmann, President Fax: 301.540.8004 E-Mail: [email protected]ACCREDITED AGENCIES FOR SUPERVISORY AND LOT INSPECTION OF WOOD PACKAGING MATERIAL July 2020 (this list supersedes all previous lists) Agencies accredited by the Board of Review of the American Lumber Standard Committee, Incorporated and typical quality marks. Interpreting a Quality Mark a. Trademark – the identifying symbol, logo, or name of the accredited agency b. Facility Identification – product manufacturer name, brand or assigned facility number c. Heat Treated mark (note - in cases where dielectric heating is used to meet requirements a mark will denote DH instead of HT) d. Country Code – the two letter ISO country abbreviation e. Approved International symbol for compliant wood packaging material f. Indication for use as dunnage (may be abbreviated or spelled out fully)
9
Embed
ACCREDITED AGENCIES FOR SUPERVISORY AND LOT …alsc.org/uploaded/WPM_facsimile July 2020.pdf · 2020. 7. 17. · Green Bay, WI 54301 920 -412 7056 Fax: 920 .227 6316 ... Renewable
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
American Lumber Standard Committee, Incorporated®
T.F. Brodie, Chairman 7470 New Technology Way, Suite F L.N. Belden, Vice Chairman Frederick, Maryland 21703 J.A. Brochu, Treasurer Telephone: 301.972.1700 D.E. Kretschmann, President Fax: 301.540.8004
ACCREDITED AGENCIES FOR SUPERVISORY AND LOT INSPECTION
OF WOOD PACKAGING MATERIAL July 2020
(this list supersedes all previous lists)
Agencies accredited by the Board of Review of the American Lumber Standard
Committee, Incorporated and typical quality marks.
Interpreting a Quality Mark
a. Trademark – the identifying symbol, logo, or name of the accredited agency
b. Facility Identification – product manufacturer name, brand or assigned facility number c. Heat Treated mark (note - in cases where dielectric heating is used to meet requirements a
mark will denote DH instead of HT) d. Country Code – the two letter ISO country abbreviation
e. Approved International symbol for compliant wood packaging material
f. Indication for use as dunnage (may be abbreviated or spelled out fully)
Addendum With the revision of the International Plant Protection Convention’s Regulation of Wood Packaging Material in International Trade (ISPM-15) in April 2009, the quality marks above superseded the following quality marks. The April 2009 ISPM-15 revision requires the placement of additional information, such as the agency trademarks, to be outside the borders of the IPPC mark. While the accredited agency quality marks have been amended to comply with ISPM-15, wood packaging material will continue to be found with the marks shown below.
Carolina Inspection Services, Inc. Carolina Inspection Services, Inc. Continental Inspection Agency, LLC
Conway & Robison, LLC Lee Inspection & Consulting Services, Inc.
Missouri Forest Products Association
Missouri Forest Products Association Missouri Forest Products Association Northeastern Lumber Manufacturers Association
Northeastern Lumber Manufacturers Association
Pacific Lumber Inspection Bureau Pacific Lumber Inspection Bureau