www.asconumatics.eu X021-27-26 00496GB-2008/R01 Availability, design and specifications are subject to change without notice. All rights reserved. Accessory Description Order Code 2005 Regulator repair kit 0.2 to 2 bar 214-221 0.3 to 4 bar 214-222 0.7 to 9 bar 214-223 2012 Regulator repair kit 0.2 to 2 bar 239-1909 0.3 to 4 bar 239-1910 0.7 to 9 bar 239-1911 2035 Regulator repair kit 0.2 to 2 bar 239-2220 0.3 to 4 bar 239-2221 0.7 to 9 bar 239-2222 2005 2012 Elbow kit 239-1217 Retaining clip 131-236 2005 Extension kit 239-1790 2005 2012 2035 Gauge to max. 11 bar 214-215 Gauge to max. 4 bar 214-220 2005 2012 2035 Adapter, port G1/8 239-2048 Retaining clip 131-236 Accessories • Sandwich Pressure Regulators 2005 / 2012 / 2035 Series
21
Embed
Accessories • Sandwich Pressure Regulators - ASCO · DIN rail mounting 2005 2012 239-980 2005 / 2012 / 2035 Series Spare Parts ... LH ports with muffler, w/o DIN rail 0.820 239-1690
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
www.asconumatics.euX021-27-26
0049
6GB
-200
8/R
01A
vaila
bilit
y, d
esig
n an
d sp
ecifi
catio
ns a
re s
ubje
ct to
cha
nge
with
out n
otic
e. A
ll rig
hts
rese
rved
.
Accessory Description Order Code
2005 Regulator repair kit
0.2 to 2 bar 214-221
0.3 to 4 bar 214-222
0.7 to 9 bar 214-223
2012 Regulator repair kit
0.2 to 2 bar 239-1909
0.3 to 4 bar 239-1910
0.7 to 9 bar 239-1911
2035 Regulator repair kit
0.2 to 2 bar 239-2220
0.3 to 4 bar 239-2221
0.7 to 9 bar 239-2222
20052012
Elbow kit 239-1217
Retaining clip 131-236
2005 Extension kit 239-1790
200520122035
Gauge to max. 11 bar 214-215
Gauge to max. 4 bar 214-220
200520122035
Adapter, port G1/8 239-2048
Retaining clip 131-236
Accessories • Sandwich Pressure Regulators
2005 / 2012 / 2035 Series
Spare Parts • Sandwich Components
Sandwich speed controls for valves and regulators are equipped with an integral plug-in system. Sandwich speed con-trols provide a variable restriction in ports 3 and 5 in order to control the cylinders’ extend and retract speed. To facilitate easy adjustment both screws are on the same side of the speed control.
Note: Sandwich speed controls can only be used with single sandwich pressure regulators.
Single Solenoid PilotActuated, 5-port., 2-pos. Valve
Single SandwichPressure Regulator
Sandwich Speed ControlPlug-in System
Stud Manifold Block
Sandwich Speed Control
Accessory Description Order code
Sandwich speed control
2005 239-15972005
ISO15407-2 245-122
2012 239-12602012
ISO15407-2 239-2521
2035 239-2223
Shut-off sandwich plate
- Only apply with internal pilot air.- Regulator and sandwich speed control must be
mounted in the lowest position.- If used with regulator, only use with ES or ED
regulator.- Regulated pressure > 1.8 bar.
2005 239-1596
2012 239-1585
Sandwich pressure block
- Used to supply a separate pressure to a single valve station without needing blocking disks.
XE32145X
1
X 5 4 1 2 3 XE
2005 239-21882005
ISO15407-2 245-164
2012 239-14362012
ISO15407-2 245-141
2035 239-2228
Sandwich exhaust block
- Used to isolate the exhaust of a single valve station from the manifold.
- Allows faster exhaust response by re-routing.- Exhaust externally to the manifold.
32145X
5 3
XE32145X
XE2005 239-21892005
ISO15407-2 245-163
2012 239-15562012
ISO15407-2 245-140
2035 239-2230
2005 / 2012 / 2035 Series
www.asconumatics.eu X021-27-27
0049
6GB
-201
1/R
01A
vaila
bilit
y, d
esig
n an
d sp
ecifi
catio
ns a
re s
ubje
ct to
cha
nge
with
out n
otic
e. A
ll rig
hts
rese
rved
.
Assembly/disassembly of bar:- 2005: 2 mm external hex key- 2012 & 2035: 2.5 mm external hex key2005 - 2012 2035
Accessory Description Order Code
Blank station plate(screw, blank station plate, O-ring, gasket)
Plug for conversion of pilot supply20052012 213-497
2035 213-590
DIN rail mounting 20052012 239-980
2005 / 2012 / 2035 SeriesSpare Parts
Accessory Description Order Code
Interchangeable cartridge fittings
Push-in fitting for ports 1, 3, 5 (10 mm)
2005
134-509Push-in fitting for ports X, XE (6 mm) 134-499Push-in fitting for ports 2, 4 (6 mm) 134-534Push-in fitting for ports 2, 4 (8 mm) 134-501Blocking plug for ports 1, 3, 5 239-1190Blocking plug for ports X, XE 239-1086Blocking plug for ports 2, 4 239-1085Push-in fitting for ports 1, 2, 4 (8 mm)
2012
134-507
Push-in fitting for ports 1, 2, 4 (10 mm) 134-509
Push-in fitting for ports X, XE (4 mm) 134-498
Push-in fitting for ports X, XE (6 mm) 134-499
Push-in fitting for ports 3, 5 (12 mm) 134-511
Push-in fitting for ports 3, 5 (14 mm) 134-513
Blocking plug for ports 1, 2, 4 239-1190
Blocking plug for ports X, XE 239-1086
Blocking plug for ports 3, 5 239-1191
www.asconumatics.euX021-27-28
0049
6GB
-200
8/R
01A
vaila
bilit
y, d
esig
n an
d sp
ecifi
catio
ns a
re s
ubje
ct to
cha
nge
with
out n
otic
e. A
ll rig
hts
rese
rved
.
End plate kit, supply ports on both sides, with thread
End plate kit, supply ports on both sides, with push-in fittings
End plate kits Order Code Weight Port 1 3/5 X/XE 1 3/5 X/XE approx. [kg] Size G 3/8 G 3/8 G 1/8 10 mm 10 mm 6 mm Without muffler, standard mount 0.880 239-1646 239-1654Without muffler, for DIN rail mounting 0.822 239-1645 239-1653With muffler, standard mount 0.805 239-1644 239-1652
With muffler, for DIN rail mounting 0.815 239-1643 239-1651On request: with NPTF thread
2005 Series
End plate kit, supply ports on both sides, with thread
End plate kit, supply ports on both sides, with push-in fittings
End plate kits Order Codewith supply ports Port Weight 1-3/5-X/XE 1-3/5-X/XE Weight 1-3/5-X/XE Weight 1-3/5-X/XEon both ends Size approx.
[kg]ISO228/1-G
3/8-1/2-1/8NPTF
3/8-1/2-1/8approx.
[kg]PUSH-IN8-12-6 mm
approx. [kg]
PUSH-IN10-14-6 mm
Without muffler standard mount 1.215 239-1240 239-1236 1.335 239-1255 1.300 239-1256
Without muffler for DIN rail mounting 1.235 239-1239 239-1235 1.355 239-1253 1.320 239-1254
With muffler, standard mount 1.150 239-1238 239-1234 1.200 239-1251 1.205 239-1252
With muffler, for DIN rail mount 1.170 239-1237 239-1233 1.220 239-1249 1.225 239-1250
2012 Series
Spare Parts • End Plate Kits
2005 / 2012 / 2035 Series
www.asconumatics.eu X021-27-29
0049
6GB
-200
8/R
01A
vaila
bilit
y, d
esig
n an
d sp
ecifi
catio
ns a
re s
ubje
ct to
cha
nge
with
out n
otic
e. A
ll rig
hts
rese
rved
.
End plate kit
End plate kits Order Code Weight Port 1 3/5 X/XE approx. [kg] Size 1/2 1/2 1/8End plates with muffler 2.050 239-2207End plates without muffler 2.050 239-2208LH ports with muffler, RH mounting cover with pilot exhaust 2.050 239-2215LH ports without muffler, RH mounting cover with pilot exhaust 2.050 239-2216On request: with NPTF thread
2035 Series
Spare Parts • End Plate Kits
2005 / 2012 / 2035 Series
2012 Series
www.asconumatics.euX021-27-30
0049
6GB
-200
8/R
01A
vaila
bilit
y, d
esig
n an
d sp
ecifi
catio
ns a
re s
ubje
ct to
cha
nge
with
out n
otic
e. A
ll rig
hts
rese
rved
.
End plate kit, supply ports on left side, with thread
End plate kit, supply ports on left side, with push-in fittings
End plate kits Order CodePort Weight 1-3/5-X/XE 1-3/5-X/XE Weight 1-3/5-X/XE Weight 1-3/5-X/XESize approx.
Series05 = 2005 Series12 = 2012 Series35 = 2035 SeriesI5* = 2005 Series ISO 15407-2 18mmI6* = 2012 Series ISO 15407-2 26mmR5*(1)= 2005 Series ISO 15407-2 18mmR6*(1)= 2012 Series ISO 15407-2 26mm
*see the symbols table bellow to verify compatibility with spool valves functions
(1) rubber packed spool
05 1 ES 1 00 J 0 000 00
Spare Parts • Sandwich Pressure RegulatorsSandwich Pressure Regulator Model Number
Pressure Range1 = 0.7 to 9 bar3 = 0.2 to 2 bar4 = 0.5 to 4 bar
Options000 = Standard12H = Without gauge16N = Jumper on 14 end 16P = Jumper on 12 end
16W = Top facing gauge* (2005 series)
61Y = Extended gauge* (2005 series)63D = 16W + 61Y* (2005 series)* see note belowFurther options on request
Wiring OptionJ = Plug-in receptacle
Mounting 2005 2012-3500 = Regulator unit only X X
Port Type of BasesO = Without base
Port Size of Base 2005 2012 2035
1 = Valve w/o manifold X
2 = Valve w/o manifold X
3 = Valve w/o manifold X
Regulator TypeES = Single pressure to port 1ED = Dual pressure to ports 3 and 5
EC = Dual pressure with non-relieving checks (2012 and 2035 series)
EQ = Dual pressure with relieving checks (2012 and 2035 series)
EE = Dual pressure to ports 4 and 2ET = Two-pressure selector
Ribbon cable option must be used for manifold assemblies that exceed 16 solenoids.
(7th and 8th digit of valve order code) (please refer to explanations on page X021-27-34)
Note (2005 series):Regulator gauges must be offset on alternating sta-tions to prevent interference (see photo)• Odd numbered stations will use either standard (no
option) or top facing (“16W” option) gauges.• Even numbered stations will use either extended
standard (“61Y” option) or extended top facing (“63D” option) gauges.
Series05 = 2005 Series12 = 2012 Series35 = 2035 SeriesI5 = 2005 Series ISO 15407-2 18mmI6 = 2012 Series ISO 15407-2 26mm
Symbols
14
122
4
14513
12
24
14513
12
1412
14513
12
24
Single pressure from a single supply
Dual pressure from a single supply
Non-relieving: taps downstream pressure if
upstream is exhausted
14513
12
24
145
5
4 2
31
13
12
24
14513
12
1412
122
4
14
Relieving:exhausts pressure in cylinder
if upstream pressure is exhausted
External outlet regulator used with jumper plate for single or
dual pressure
Two-pressure selector used for multi-pressure applications
ES ED EC(2012-2035)
ETEEEQ(2012-2035)
www.asconumatics.eu X021-27-33
0049
6GB
-200
9/R
01A
vaila
bilit
y, d
esig
n an
d sp
ecifi
catio
ns a
re s
ubje
ct to
cha
nge
with
out n
otic
e. A
ll rig
hts
rese
rved
.
Spare Parts • Manifold Assembly Kits “Z-Boards”™“Z-Boards”™ 2005 Series includes 4 different “Z-Boards”™ for driving up to 32 solenoids of single and double solenoid actuated valves.Ribbon cable feature must be used for manifold assemblies that exceed 16 solenoids.In order to allow the full capacity of 32 solenoids, the assembly must be configured so that an even number of solenoids is utilised prior to the station using the ribbon cable feature.
Note: The 16th and 17th solenoid cannot be on the same valve.(See valve model number selection for 7th and 8th digit for valve with 17th solenoid).
Manifold Assemblies
Manifold assemblies Order Code*with bottom ports Weight Side portsin G 1/4 or NPTF approx. [kg] G 1/4 NPTF 1/4 G 3/8 NPTF 3/8 8 mm push-in 10 mm push-inWith single “Z-Board”™ 0.290 206-1256 206-1272 206-1255 206-1271 206-1257 206-1258
With double “Z-Board”™ 0.290 206-1264 206-1280 206-1263 206-1279 206-1265 206-1266With single “Z-Board”™ and ribbon cable 0.312 206-1260 206-1276 206-1259 206-1275 206-1261 206-1262With double “Z-Board”™ and ribbon cable 0.310 206-1268 206-1284 206-1267 206-1283 206-1269 206-1270* Manifold assemblies with adapter to ISO 15407-2, see following page.
Manifold assemblies Weight Order Code* with bottom ports Side portsin G 1/8“ or 1/4“ approx. [kg] G 1/8 NPTF 1/8 6 mm push-in 8 mm push-in With single “Z-Board”™ 0.255 206-1371 206-1373 206-1387 206-1363** With double “Z-Board”™ 0.253 206-1372 206-1374 206-1388 206-1364**With single “Z-Board”™ and ribbon cable 0.275 206-1375 206-1377 206-1389 206-1379**With double “Z-Board”™ and ribbon cable 0.273 206-1376 206-1378 206-1390 206-1380*** Manifold assemblies with adapter to ISO 15407-2, see following page.** Bottom ports G 1/4“
Manifold assemblieswith side ports with bottom ports
BOrder Code G 1/2“ G 3/8“
Order CodeNPTF 1/2“NPTF 3/8“
Order CodeG 3/8“G 3/8“
Order CodeNPTF 3/8“NPTF 3/8“
Weightapprox.
[kg]
With single “Z-Board”™ 206-1610 206-1608 206-1611 206-1609 0.640
With double “Z-Board”™ 206-1614 206-1612 206-1615 206-1613 0.645
With single “Z-Board”™ and ribbon cable 206-1622 206-1620 206-1623 206-1621 0.690
With double “Z-Board”™ and ribbon cable 206-1618 206-1616 206-1619 206-1617 0.695
2005 Series
2005 / 2012 / 2035 Series
2012 Series
2035 Series
www.asconumatics.euX021-27-34
0049
6GB
-200
8/R
01A
vaila
bilit
y, d
esig
n an
d sp
ecifi
catio
ns a
re s
ubje
ct to
cha
nge
with
out n
otic
e. A
ll rig
hts
rese
rved
.
2005 / 2012 / 2035 Series
www.asconumatics.eu X021-27-35
Manifold Assembly Kits to ISO 15407-2
Spare Parts • Manifold Assembly Kits to ISO 15407-2
Manifold Assembly Kits - Size 18 mm ISO 15407-2Side ports 1/8 NPTF G 1/8 1/4 Push-in 6mm Push-in 5/16 (8mm) Push-in
Bottom ports 1/8 NPTF G 1/8 1/4 NPTF G 1/8 G 1/8
Single “Z-Board”™ 206-1719 206-1717 206-1723 206-1725 206-1721
Description Weight Order approx. [kg] Mid-station supply & exhaust block with threaded side ports in G 1/8* 0.205 239-1789 Mid-station supply & exhaust block with side push-in fittings 0.240 239-1788* On request: Threaded ports in NPTF 1/8
• Add additional supply and exhaust capacity to large manifold assemblies• Add different pressure to manifold section with use of blocking disks• Same size as standard manifold block with blank station plate
Description Weight Order approx. [kg] CodeMid-station supply & exhaust block with threaded side ports in G 3/8 0.290 239-1331
Mid-station supply & exhaust block with threaded side ports in NPTF 3/8 0.290 239-1330Mid-station supply & exhaust block with side push-in fittings 10 mm 239-1333
Description Weight Order approx. [kg] CodeMid-station supply & exhaust block 0.770 239-2225On request: Threaded ports in NPTF
2005 Series
2012 Series
2035 Series
Manifold Assemblies with Aux. 24 VDC Power Connection
2005 Series Description Weight Order approx. [kg] CodeManifold assembly with single “Z-Board”™, side ports with 8 mm push-in fittings 0.255 206-1430Manifold assembly with double “Z-Board”™, side ports with 8 mm push-in fittings 0.255 206-1462
2012 Series Description Weight Order approx. [kg] CodeManifold assembly with single “Z-Board”™, side ports with 10 mm push-in fittings 0.290 206-1428Manifold assembly with double “Z-Board”™, side ports with 10 mm push-in fittings 0.290 206-1429
0049
6GB
-200
8/R
02²
Ava
ilabi
lity,
des
ign
and
spec
ifica
tions
are
sub
ject
to c
hang
e w
ithou
t not
ice.
All
right
s re
serv
ed.
2005 Series
2012 Series
2035 Series
Plug for conversion of pilot supply20052012 213-497
2035 213-590
2005 / 2012 / 2035 Series
Spare Parts • Conversion of Pilot Air Supply
www.asconumatics.eu X021-27-37
0049
6GB
-200
8/R
01A
vaila
bilit
y, d
esig
n an
d sp
ecifi
catio
ns a
re s
ubje
ct to
cha
nge
with
out n
otic
e. A
ll rig
hts
rese
rved
.
Conversion of Pilot Air Supply
Manifolds can easily be converted from internal to external pilot supply.
When converting from internal to external pilot supply, please ensure that the manifold is not pressurised, as pressure is applied to the end plate covers.
For external pilot supply plug here.
Left end plate only!
For internal pilot supply plug here.
Left end plate only!
For external pilot supplyplug here.
For internal pilot supplyplug here.
In both end plates!
For internal pilot supply plug here.
In both end plates!
For internal pilot supplyplug here.
Left end plate only!
For external pilot supplyplug here.Left end plate only!
C A
B
-
Spare Parts • Adaptor Plate Kits
2012 Series
Adaptor Plate Kits
Description A B C Weight Order approx. [kg] CodeTransition plate for 2012 left of 2005 133.0 56.0 26.0 0.400 239-1965Transition plate for 2012 ISO 15407-2 26mm left of 2005 ISO 10407-2 18mm 133.0 56.0 26.0 0.400 245-156Transition plate for 2012 ISO 15407-2 26mm left of ISO 5599/2 size 2 195.0 65.0 24.8 0.400 245-187C
Dimensions [mm]
The kit includes the adapter plate, transfer board, gasket, screws and studs. Individual end plates for the 2005 and 2012 are not incuded. This adaptor allows the transition from the 2012 to the 2005 series.
Adaptor Plate Kit with Standard End Plates(“STD“ Option)Description Order Code2005 with 3/8 G-tap to 2012 with 3/8 and 1/2 G-tap
239-2068
2005 with 10 mm push-in to 2012 with 10 and 14 mm push-in
239-2076
Adaptor Plate Kit with Standard End Plates and Muffler(“MUF“ Option)Description Order Code2005 with 3/8 G-tap to 2012 with 3/8 and 1/2 G-tap
239-2069
2005 with 10 mm push-in to 2012 with 10 and 14 mm push-in
239-2077
Adaptor Plate Kit with Standard End Plates and DIN rail mount(“DRM“ Option)Description Order Code2005 with 3/8 G-tap to 2012 with 3/8 and 1/2 G-tap
239-2070
2005 with 10 mm push-in to 2012 with 10 and 14 mm push-in
239-2078
Adaptor Plate Kit with Standard End Plates, muffler and DIN rail mount (“DWM“ Option)Description Order Code2005 with 3/8 G-tap to 2012 with 3/8 and 1/2 G-tap
239-2071
2005 with 10 mm push-in to 2012 with 10 and 14 mm push-in
239-2079
www.asconumatics.euX021-27-38
0049
6GB
-200
9/R
01A
vaila
bilit
y, d
esig
n an
d sp
ecifi
catio
ns a
re s
ubje
ct to
cha
nge
with
out n
otic
e. A
ll rig
hts
rese
rved
.
A
Spare Parts • Transition Plate Kits
Transition Plate Kits
Adapter plate kit
The kit includes the adapter plate, transfer board, gasket, screws and studs. Individual end plates for the 2005 and 2012 are not incuded. This adaptor allows the transition from the 2035 to the 2012 series.