Accessories Catalog

TOTAL COVERAGE FOR

In-Building Tunnels & Subways Urban Shadowed Areas Isolated Valleys Rural Areas

GSM CDMA TDMA PCS SMR

ubiquitous voice & data coverage solutions

www.shyamtelecom.com

Shyam Telecom GmbH

Mainaschaffer Str. 113, D-63741 Aschaffenburg, Germany

Tel. +49 6021 45 90 10, Fax: +49 6021 45 90 129

Shyam Telecom Inc.

6 Kilmer Road, Suite D, Edison, NJ 08817, USA

Tel: +1 732 985 1324, Fax: +1 732 907 1023

Shyam Telecom Ltd.

246 Udyog Vihar, Phase IV, Gurgaon, India

Tel: +91 124 4311600, Fax: +91 124 4018116

E-mail : [email protected]

SHYAM is the oldest specialized Indian company for Antenna Electronic, R.F. Communication System. Together with its sister telecom operator companies employees more than 1000 people.

SHYAM is the unique company, which has 30 years of experience in designing, Reception & Distribution of RF signals, 8 Years experience as GSM operator, 7 Years experience as V-Sat operator & 6 Years experience as CDMA operator.

All our system components are technically harmonized to each other, so as to guarantee the best physically possible transmission quality.

Nevertheless, because of the size of our undertaking we are also highly flexible- which is just what the market in today’s rapidly changing times demands. The construction of systems consisting of hundreds of different components, which must all form a functional whole at give time and specific place demands a high degree of mobility and logistic skill

Our company philosophy is faithful to its chosen motto “Quality makes it’s way” what we think, what we do and what we make are all highly professional.

We tailor-made to the whishes and specifications of our customers Outdoor coverage solutions & In Building Systems. We guarantee the systems. Our products have been known and recognized by mobile telecom operators

we make

All Specifications are subject to change without prior noticewww.shyamtelecom.com All Specifications are subject to change without prior notice

TABL

E O

F C

ON

TEN

TS

1www.shyamtelecom.com

SPLITTER / COMBINERS2 Way Splitter [800 – 2500 MHz]3 Way Splitter [800 – 2500 MHz]4 Way Splitter [800 – 2500 Mhz]

345

MULTICASTING MATRIX2 way Multicasting Matrix2 way Multicasting Matrix [ 1700 – 2200 Mhz ]2 way Multicasting Matrix [ 800 – 2500 Mhz ]4 way Multicasting Matrix [ 800 – 2500 Mhz] 4 way Multicasting Matrix [ 800 – 960 Mhz ]4 way Multicasting Matrix [ 1700 – 2200 Mhz ]

[ 800 – 960 Mhz ] 67891011

DIRECTIONAL COUPLERSLow Loss Power Tappers, 800-2500 MHz, 5 dB CouplingLow Loss Power Tappers, 800-2500 MHz, 7 dB CouplingLow Loss Power Tappers, 800-2500 MHz, 10 dB CouplingLow Loss Power Tappers, 806-2500 MHz, 15 dB Coupling

12131415

DIRECTIONAL COUPLERS[For Optical & Frequency Converter Repeaters]Directional Coupler, 806-960 MHz – 20/30/40/50 dBDirectional Coupler, 1710-1990 MHz – 20/30/40/50 dBDirectional Coupler, 1920-2170 MHz – 20/30/40/50 dB

161718

FILTERSBand Pass Filter 890-960 Mhz ( FULL BAND )Band Pass Filter 2nd Operator GSM 896-915 MHzBand Pass Filter 890-915 Mhz

192021

DIPLEXERSDiplexer / Cross Band Coupler [824-960 & 1710-1990]Diplexer GSM+DCSDiplexer GSM+UMTS

222324

TRIPLEXERSTriplexer GSM+DCS and UMTSTriplexer 824-960,1710-1990,2400-2500 26

25

DUMMY LOADS50 Ohms Terminators, Rating 2 W 50 Ohms Terminators, Rating 10 W50 Ohms Terminators, Rating 25 W 50 Ohms Terminators, Rating 50 W50 Ohms Terminators, Rating 100 W

2930313233

PASSIVE MULTI OPERATOR COMBINERSDual Band Passive Multi Operator Combiner [2+2] [824-960,1710-1990]Dual Band Passive Multi Operator Combiner [4+4] [824-960,1710-1990]

2728

All Specifications are subject to change without prior notice

2 W

AY S

PLIT

TER

3

LOW-LOSS POWER SPLITTER (2 Way Splitter)

Product Descriptionhese Wideband Splitters are available for 2 way power splitting or providing two receiver outputs, terminated with N-Type Connectors. T

These splitters allow operation across the range from 800 MHz to 2.5 GHz making them particularly suitable for use in the distribution of multiple mobile operators signal into buildings and tunnels.

Specifications

Type No. 1173 0001 102Frequency Range 800 – 2500 MHz

VSWR 1.3:1 Max

Impedance 50 Ohms

Insertion Loss < 3.5 dB

Termination N - Female

Total Input Power Rating 150 Watts

Dimension (mm) 203.6x50x35 mm/ 9”x2”x2”

Weight (Kgs) 0.230 kg

Size (mm/inch) 215x50x35mm / 9”x2”x2”o oOperating temperature( C/ F)

Operating Humidity 5 – 95%

Applications� Feeder Distribution� Multiple Receiver Outputs� Antenna Arrays� Combining Systems

Network

Material Housing : Aluminum

DC capability �DC transmission between all terminations (suitable for remote power supply systems).

Ø Low LossØ Isolated OutputsØ Low Power CombiningØ Wide Bandwidth

2 WAY SPLITTER


o o o o-35 C to 70 C / -31 F to 158 F

TABL

E O

F C

ON

TEN

TS

2 All Specifications are subject to change without prior noticewww.shyamtelecom.com

INDOOR ANTENNASMulti Band Omni Ceiling Antenna [800 – 2500 MHz]Patch Panel Directional Dual Band Antenna [800 – 2500 MHz]

3940

OUTDOOR ANTENNAS

Outdoor Directional Antenna [ 1710 – 2170 Mhz], 9 dBiOutdoor Dual Band Directional Antenna [ 824 – 2170 Mhz], 7/9 dBi

Outdoor Yagi Antenna [1710 –2170], 10 dBiOutdoor Yagi Antenna [806-960], 12 dBiOutdoor Yagi Dual Band [900-1800], 7/9 dBiQuad Band Yagi Antenna [800-2500], 8.5/ 11 dBiOutdoor Repeater Server Antenna [806-960], 16 dBi

Outdoor Directional Antenna [ 824 – 960 Mhz], 7 dBi 414243

4445464748

ANTENNA INSTALLATION 49-50

APPLICATIONS / ENGINEERING NOTESVSWR Conversion Chart 52

GLOSSARY 53

51PART NO. REFERENCE

ATTENUATOR Att nuator [ 3 dB ]Attenuator [ 6 dB ]Attenuator [ 10 dB ]Attenuator [ 20 dB ]Attenuator [ 30 dB ]

e 3435363738


4 W

AY S

PLIT

TER

3 W

AY S

PLIT

TER

4 All Specifications are subject to change without prior notice 5


Product Descriptionhese Wideband Splitters are available for 4 way power splitting or providing four receiver outputs, terminated with N-Type Connectors. T



Network

Material � : AluminumHousing




Product Descriptionhese Wideband Splitters are available for 3 way power splitting or providing three receiver outputs, terminated with N-Type Connectors. T



Network




Specifications


VSWR 1.3:1 Max

Impedance 50 Ohms




Dimension (mm/inch) 203.6x62.3x43.4mm

Weight (Kgs/lbs) 0.27 kgs

Operating temperature o o( C/ F) o o o o-35 C to 70 C / -31 F to 158 F


Specifications


VSWR 1.3:1 Max

Impedance 50 Ohms

Insertion Loss < 5 dB



Dimension (mm/inch) 203.6x62.3x24.8 mm

Weight (Kgs/lbs) 0.250 kgs o oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F


3 WAY SPLITTER 4 WAY SPLITTER

www.shyamtelecom.comwww.shyamtelecom.com


2 W

AY M

ULT

ICA

STIN

G M

ATR

IX

7

2 WAY MULTICASTING MATRIX

Product Descriptionhe Unit combines up to 2 input ports from a radio base station to 2 output ports in a single distributed antenna system. T

The advantage of this is that minimum hardware needs to be installed and minimum of loss is retained.

Tx/Rx

Specifications


VSWR 1.3:1 Max

Impedance 50 Ohms

Coupling 3.2 + 0.5 dB


Total Power Rating

Isolation

100 Watts

> 20 dB


Weight (Kgs/lbs) 0.270Kgs / 0.6 lbs Approx



Applications� Multiple Receiver Outputs� Antenna Arrays� Combining Systems


2 WAY MULTICASTING MATRIX [1700-2200]


ØLow LossØWide BandwidthØIsolated Outputs ØEasy to Install

(1700 – 2200 Mhz)

IN IN

TRX2 TRX1

TRX1 + TRX2

2 Way2 Way--2 Way Matrix2 Way Matrix

OUTOUT

TRX1 & TRX2


OUTOUT

2 W

AY M

ULT

ICA

STIN

G M

ATR

IX

6 All Specifications are subject to change without prior notice


Product Descriptionhe Unit combines up to 2 Tx input ports from a radio base station to 2 output ports in a single distributed antenna system. T


/Rx

Specifications


VSWR 1.3:1 Max

Impedance 50 Ohms



Total Power Rating

Isolation

100 Watts

> 20 dB


Weight (Kgs/lbs) 0.270Kgs







( 800-960 Mhz )


806-960 Mhz

IN IN

TRX2 TRX1

TRX1 + TRX2


OUTOUT

TRX1 & TRX2


OUTOUT


4 W

AY M

ULT

ICA

STIN

G M

ATR

IX

9




Tx/Rx

Specifications

Type No. 1164 0011 104Frequency Range 800 - 2500 MHz

VSWR 1.3:1 Max

Impedance 50 Ohms



Total Power Rating

Isolation

100 Watts

> 20 dB

Dimension (mm/inch) 150x60x25 mm / 6”x2”x1”

Weight (Kgs/lbs) 0.6Kgs / 1.5 lbs Approxo oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F







(800 – 2500 Mhz)

4 Way x 4 Way Matrix4 Way x 4 Way Matrix

800 800 –– 960 MHz960 MHz

TRX1TRX1 TRX2TRX2 TRX3TRX3 TRX4TRX4

TRX1+2+3+4TRX1+2+3+4 TRX1+2+3+4TRX1+2+3+4TRX1+2+3+4TRX1+2+3+4 TRX1+2+3+4TRX1+2+3+4

OUTOUT

ININ


800 –– 2500 MHz



OUTOUT

ININ

2 W

AY M

ULT

ICA

STIN

G M

ATR

IX



Product Descriptionhe Unit combines up to 2 Tx input ports from a radio base station to 2 output ports in a single distributed antenna system. T


/Rx

Specifications


VSWR 1.3:1 Max

Impedance 50 Ohms



Total Power Rating

Isolation

100 Watts

> 20 dB









( 800-2500 Mhz )


806-960 Mhz

IN IN

TRX2 TRX1

TRX1 + TRX2


OUTOUT

TRX1 & TRX2


OUTOUT

–800 960 MHz


4 W

AY M

ULT

ICA

STIN

G M

ATR

IX

4 W

AY M

ULT

ICA

STIN

G M

ATR

IX





Tx/Rx




Tx/Rx

Specifications


VSWR 1.3:1 Max

Impedance 50 Ohms



Total Power Rating

Isolation

100 Watts

> 20 dB


Weight (Kgs/lbs) 0.6 kgs/ 1.5 lbs Approx






Specifications


VSWR 1.3:1 Max

Impedance 50 Ohms



Total Power Rating

Isolation

100 Watts

> 20 dB


Weight (Kgs/lbs) 0.6Kgs / 1.5 lbs Approxo oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F





4 WAY MULTICASTING MATRIX [800-960] 4 WAY MULTICASTING MATRIX [1700-2200]


(800 – 960 Mhz) (1700 – 2200 Mhz)


––



OUTOUT

ININ




OUTOUT

ININ


800 800 –– 960 MHz960 MHz



OUTOUT

ININ


1700 –– 2200 MHz



OUTOUT

ININ

LOW

-LO

SS P

OW

ER T

APP

ERS


LOW-LOSS POWER TAPPERS ( Directional Couplers)

Product Descriptionirectional Couplers are available to couple Power/Frequency at a pre-set coupling level with a coupling range of 5.0 dB.D

These broadband couplers allow operation across the range from 800 MHz to 2.5 GHz making them particularly suitable for use in the distribution of multiple mobile operators signal into buildings and tunnels.

Applications�Radiating Cable Networks�Combiner Systems�Testing�Distributed Antenna Systems

Material � : Aluminum� Inner conductor : Brass

Housing

DC capability � DC transmission only between input and port O1� O2 is capacitive coupled.

Ø High DirectivityØ Good VSWRØ High PowerØ Broadband

Specifications

Type No. 1173 0001 105Frequency Range 800 – 2 00 5 MHz

VSWR 1.3:1 Max

Impedance 50 Ohms

Tap Loss 1.5 dB4.8 dB + 0.5 dB



Dimension (mm/inch) 156x58x16.5mm


o oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F



01 – 0201 – 03

LOW-LOSS POWER TAPPERS (Directional Couplers)

Product Description wide range of Directional Couplers are available to couple Power/Frequency at a pre-set coupling level with a coupling range of 7dB.A

These broadband couplers allow operation across the range from 800 MHz to 2.5 GHz making them Particularly suitable for use in the distribution of multiple mobile operators signal into buildings and tunnels.

Specifications


VSWR 1.3:1 Max

Impedance 50 Ohms

Tap Loss 01 – 02 0.9 dB

01 – 03 7.0 + 0.5 dB

Termination

Total Input Power Rating

N - Female

150 Watts





Applications� Radiating Cable Networks� Combiner Systems� Testing� Distributed Antenna Systems


Housing

ØHigh DirectivityØGood VSWRØHigh PowerØBroadband

DC capability �DC transmission only between input and port O1. �O2 is capacitive coupled. LOW LOSS POWER TAPPER - 7dB

7dB

13

LOW

-LO

SS P

OW

ER T

APP

ERS

LOW LOSS POWER TAPPER - 5dB

5 dB


Product Description wide range of Directional Couplers are available to couple Power/Frequency at a pre-set coupling level with a coupling range of 15dB.A


Specifications


VSWR 1.3:1 Max

Impedance 50 Ohms

Tap Loss 01 – 02 0.12 dB

01 – 03 15.0 - 0.5 dB

Termination


N - Female

150 Watts







Housing


DC capability DC transmission only between input and port O1. O2 is capacitive coupled. LOW LOSS POWER TAPPER - 15dB

15dB


LOW

-LO

SS P

OW

ER T

APP

ERS


LOW

-LO

SS P

OW

ER T

APP

ERS


Product Description wide range of Directional Couplers are available to couple Power/Frequency at a pre-set coupling level with a coupling range of 10 dB.A



Specifications


VSWR 1.3:1 Max

Impedance 50 Ohms

Tap Loss 01 – 02 0.4 dB

01 – 03 10.0+ 0.5 dB

Termination


N - Female

150 Watts

Dimension (mm/inch) 156x58x16.5 mm


Operating temperature o o( C/ F)




Housing


DC capability DC transmission only between input and port O1. O2 is capacitive coupled. LOW LOSS POWER TAPPER - 10dB

10dB

o o o o-35 C to 70 C / -31 F to 158 F

All Specifications are subject to change without prior notice16 All Specifications are subject to change without prior notice 17

DIR

ECTI

ON

AL

CO

UPL

ER


Product Descriptionhe Unit are available to couple power/frequency at a pre-set coupling level with a coupling range 20 dB to 50 dB.T

These Broad band couplers allow operation across the range from 806 MHz – 960 MHz making them particularly suitable for use in the distribution of multiple mobile operators signal.

DIRECTIONAL COUPLER

Specifications

Type No. 1903 0040 900Frequency Range 80 – 960 6 MHz

VSWR 1.2:1 Max

Impedance 50 Ohms


Termination [Port1–2] 7/16 (M) – 7/16 (F)

Termination [Coupled]

Power Rating

N - Female

200 Watts

Dimension (mm/inch) 90x60x40 mm / 3.5”x2”x1.5”

Weight (Kgs/lbs) 0.4 kgs/ 1 lbs Approx


Couplingo o o o-35 C to 70 C / -31 F to 158 F

20/30/40/50 dB


Applications� Coupler for Fiber optic and Frequency Translating Repeater� In building wireless Networks


ØHigh DirectivityØGood VSWRØHigh PowerØBroad Bandwidth

DC capability DC Transmission only between input and outputPort 03 is capacitive coupled

(20/30/40/50 dB)(806 – 960 MHz)

DIRECTIONAL COUPLER(20/30/40/50 dB)

Product Descriptionhe Unit are available to couple power/frequency at a pre-set coupling level with a coupling range 20 dB to 50 dB.T

These Broad band couplers allow operation across the range from 1710 MHz – 1990 MHz making them particularly suitable for use in the distribution of multiple mobile operators signal.

DIRECTIONAL COUPLER

Specifications


VSWR 1.2:1 Max

Impedance 50 Ohms




Power Rating

N - Female

200 Watts





20/30/40/50 dB




ØHigh DirectivityØGood VSWRØHigh Power rating ØBroad Bandwidth


DIRECTIONAL COUPLER

(20/30/40/50 dB)

(1710 – 1990 Mhz)

(20/30/40/50 dB)

DIR

ECTI

ON

AL

CO

UPL

ER


DIR

ECTI

ON

AL

CO

UPL

ER


Product Descriptionhe Unit are available to couple power/frequency at a pre-set coupling level with a coupling range20 dB to 50 dB.T

DIRECTIONAL COUPLER

Specifications


VSWR 1.2:1 Max

Impedance 50 Ohms




Power Rating

N - Female

200 Watts





20/30/40/50 dB




ØHigh DirectivityØGood VSWRØHigh Power ratingØBroad Bandwidth


(20/30/40/50 dB)

(1920 – 2170 Mhz)

DIRECTIONAL COUPLER(20/30/40/50 dB)

Product DescriptionThis Band – Pass Filter is designed to be used in the Tx & Rx path of GSM 900 MHz BTS.

It is used : sTo reject the strong CDMA signal from CDMA BTS and to pass only 890 – 960 MHz (GSM) signal. So that the Receivers of BTS is not saturated by the CDMA BTS Down Link signal.sTo improve the input selectivity of PGSM 900 BTS receivers sTo increase the isolation between CDMA 800 and PGSM 900 antennas which are mounted closely on the same tower or which use the common antenna for CDMA 800 & GSM 900 MHz BTS co located.

Filter characteristics:Broad pass band range with low insertion loss, high CDMA stop band attenuation, steepened filter curve through additional stop poles.

BAND PASS FILTER

SpecificationsType No. 1903 0921 060Pass Band 890 – 960 MHz


VSWR 1.2:1 Max

Stop Band CDMA BTS Attenuation

889.0 MHz < 30 dB890.0 MHz < 3.5 dB915.0 MHz < 0.6 dB960.0 MHz < 0.4 B

Impedance 50 Ohms

Total Power Rating 200 W

Termination 7/16 DIN Female


Weight (Kgs/lbs) 3 Kgs / 7 lbs Approxo oOperating temperature( C/ F)


Applications� Site Sharing� Interference Removal� Multi Operator Combining

Material � : Aluminum, Silver PlatedHousing

Mounting M5 Screws ProvidedAll Metal Parts are DC Grounded.

o o o o-35 C to 70 C / -31 F to 158 F

BAND PASS FILTER (890 - 960 Mhz)

(890 - 960 Mhz)

BAN

D P

ASS

FIL

TER


BAN

D P

ASS

FIL

TER


BAND PASS FILTER

Product DescriptionThis Band – Pass Filter is designed to be used for 2nd & 3rd Operator of GSM 900 MHz.

It is used : ? To reject the strong CDMA signal from CDMA BTS and to pass only 896 – 915 MHz (GSM Uplink signal). So that the Receivers of BTS is not saturated by the CDMA BTS Down Link signal.? To improve the input selectivity of GSM 900 BTS receivers ? To increase the isolation between CDMA 800 and GSM 900 antennas which are mounted closely on the same tower or which use the common antenna for CDMA 800 & GSM 900 MHz BTS co located.


SpecificationsType No. 1903 0920 015Pass Band 896 – 915 MHz


VSWR 1.2:1 Max


890.0 MHz < 60 dB891.0 MHz < 40 dB896.0 MHz < 1.7 dB900.0 MHz < 0.8 dB915.0 MHz < 0.7 dB

Impedance 50 Ohms


Termination N Female


Weight (Kgs/lbs) 1 Kgs / 2.2 lbs Approxo oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F




Mounting M5 Screws ProvidedAll Metal Parts are DC Grounded. BAND PASS FILTER 896-915 Mhz

(896 - 915 Mhz)Product DescriptionThis Band – Pass Filter is designed to be used for GSM 900 MHz.

It is used :?To reject the strong CDMA signal from CDMA BTS and to pass only 890 – 915 MHz (GSM Uplink signal). So that the Diversity Receiver of BTS is not saturated by the CDMA BTS Down Link signal.?To improve the input selectivity of GSM 900 BTS receivers ?To increase the isolation between CDMA 800 and GSM 900 antennas which are mounted closely on the same tower or which use the common antenna for CDMA 800 & GSM 900 MHz BTS co located.


BAND PASS FILTER

SpecificationsType No. 1903 0920 050 Pass Band 890 – 915 MHz


VSWR 1.2:1 Max


888.0 MHz < 60 dB889.0 MHz < 30 dB890.0 MHz < 4.5 dB891.0 MHz < 1.8 dB915.0 MHz < 0.4 dB

Impedance 50 Ohms


Termination N Female

Dimension (mm/inch) 320x115x83

Weight (Kgs/lbs) 2 Kgs / 4.4 lbs Approxo oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F




Mounting M5 Screws ProvidedAll Metal Parts are DC Grounded.

BAND PASS FILTER 890-915 MHZ

(890-915 Mhz)

BAN

D P

ASS

FIL

TER

All Specifications are subject to change without prior notice www.shyamtelecom.com22 23All Specifications are subject to change without prior notice

Product Descriptionhese Diplexers are compact solution to allow the Co-siting of two different frequency bands on to one common output. Designed using high performance filters, these units provide Texcellent inter band isolation, low insertion loss and good intermodulation performance.

By using this Diplexer, it is possible to reduce the feeder cable requirement by 50% hence reducing rigging and tower rental costs.

DIPLEXER / CROSS BAND COUPLER

Applications� Dual Band Cellular Networks� Common Antenna Sharing� In building Coverage Systems

Material � : Aluminium, Clear ChromatedHousing

Mounting � M5 Screws Provided� All Metal Parts are DC Grounded.

DIP

LEXE

R /

CRO

SS B

AN

D C

OU

PLER

SpecificationsType No. 1903 0909 200CDMA / GSM Band 824 – 960 MHz

DCS / PCS Band 1710 – 1990 MHz

Band Isolation > 80 dB

Insertion Loss < 0.5 dBVSWR 1.3:1 Max

Propagation Delay (µs) < 1

Input / Output Port 2 / 1

Total Power Rating 250 WattsImpedance 50 Ohms

Termination N-FemaleDimension (mm/inch) 243x95x92 mm / 10”x4”x4”

Weight (Kgs/lbs) 1.5 Kgs / 3 lbs Approx



ØHigh IsolationØLow Insertion Loss ØLow Intermodulation

DIPLEXER


DIP

LEXE

R

Product Descriptionhis GSM / DCS Diplexers are compact solution to allow the co-siting of two different frequency bands on to one common output (Antenna). Designed using high performance TBand Pass filters, this model provide excellent inter band isolation, low insertion loss and

good Inter-modulation performance. By using this Diplexer, it is possible to reduce feeder cable requirement by 66% hence reducing rigging and tower rental costs, where applicable.

DIPLEXER


Material � : Aluminium, Black, Clear ChromatedHousing


SpecificationsType No. 1903 0909 000GSM Band 890 – 960 MHz

DCS Band 1710 – 1880 MHz

Band Isolation > 90 dB GSM / DCSInsertion Loss < 0.2 dBVSWR 1.3:1 Max



Total Power Rating 150 Watts

Pass Band Ripple (dB) < 0.1

Impedance 50 Ohms

Termination N-FemaleDimension (mm) 155-L x 95-W x 38-H mm

Weight (Kgs) 1.16 Kgs




DIPLEXER

Product Descriptionhis GSM / DCS / UMTS Triplexers are compact solution to allow the co-siting of three different frequency bands on to one common output (Antenna). Designed using high Tperformance Band Pass filters, this model provide excellent inter band isolation, low

insertion loss and good Inter-modulation performance.By using this Triplexer, it is possible to reduce feeder cable requirement by 66% hence reducing rigging and tower rental costs, where applicable.

TRIPLEXER





DCS Band 1710 – 1880 MHz

Band Isolation > 90 dB GSM / DCS> 60 dB UMTS / DCS

Insertion Loss < 0.4 dBVSWR 1.3:1 Max

UMTS Band 1920 – 2170 MHz





Impedance 50 Ohms

Termination N-Female/ SMA (Female)Dimension (mm) 233x58x61 mm





TRIPLEXER

25All Specifications are subject to change without prior notice www.shyamtelecom.com24 All Specifications are subject to change without prior notice

DIP

LEXE

R


Product Descriptionhis GSM / UMTS Diplexers are compact solution to allow the co-siting of two different frequency bands on to one common output (Antenna). Designed using high performance TBand Pass filters, this model provide excellent inter band isolation, low insertion loss and

good Inter-modulation performance. By using this Diplexer, it is possible to reduce feeder cable requirement by 66% hence reducing rigging and tower rental costs, where applicable.

DIPLEXER





Band Isolation > 90 dB GSM / UMTSInsertion Loss < 0.2dB

VSWR 1.3:1 Max

UMTS Band 1920 – 2170 MHz





Impedance 50 Ohms

Termination N-Female

Dimension (mm) 155-L x 95-W x 38-H mm





DIPLEXER

TRIP

LEXE

R


TRIP

LEXE

R

www.shyamtelecom.com26

TRIPLEXER

Product Descriptionhis CDMA & GSM / DCS & PCS / ISM Triplexers are compact solution to allow the co-siting of three different frequency bands on to one common output (Antenna). Designed using high Tperformance Band Pass filters, this model provide excellent inter band isolation, low

insertion loss and good Inter-modulation performance.By using this Triplexer, it is possible to reduce feeder cable requirement by 66% hence reducing rigging and tower rental costs, where applicable.


Material � : Aluminum, Black, Clear ChromatedHousing

Mounting� M5 Screws Provided� All Metal Parts are DC Grounded.

SpecificationsType No. 1903 0990 000CDMA / GSM Band 824 – 960 MHz

DCS / PCS Band 1710 – 1990 MHz


ISM Band 2400 – 2500 MHz

VSWR 1.3:1 Max

Band Isolation > 90 dB CDMA&GSM / DCS&PCS> 60 dB ISM / DCS&PCS




Impedance 50 Ohms


Termination N-Female


Dimension (mm/inch) 180x70x60mm / 7”x3”x3”




ØHigh IsolationØLow Insertion Loss & Good Return LossØLow Intermodulation

TRIPLEXER

All Specifications are subject to change without prior notice 27

PASSIVE MULTI OPERATOR COMBINER[For Site Sharing & Distributed Antenna System]

PASS

IVE

MU

LTI

OPE

RA

TOR C

OM

BIN

ER

Product Descriptionhe Passive Multi Operator Combiner has been designed to allow 2 BTS inputs in 824-960 MHz & 2 BTS inputs in 1710-1990 MHz, while providing 2 combined output ports for Site TSharing and Distributed Antenna System.

The advantage of this is that minimum hardware needs to be installed and a minimum of loss is retained.

SpecificationsType No. 1227 0422 000Frequency Range 824-960 1710-1990

Technology Supported EGSM,GSM, DCS,PCSCell

Combined Output Ports 2

BTS Input Ports 2 2

VSWR 1.3:1 Max

Insertion Loss 4.0 + 0.5 dB

Impedance 50 Ohms

Termination N-FemaleTotal Power Rating 100 Watts

Isolation > 25 dB

Dimension (mm/inch) 350x275x125 mm / 14”x11”x 5”

Weight (Kgs/lbs) 5 kgs / 10 lbs Approx




(2 + 2)

PASSIVE MULTI OPERATOR COMBINER

BTS 1+2 [824BTS 1+2 [824--960 MHz]960 MHz]

BTS 3+4 [1710BTS 3+4 [1710--1990 MHz]1990 MHz]

Output Port 2Output Port 2

BTSBTS--11

BTSBTS--22

BTSBTS--33

BTSBTS--44

824 824 –– 960 MHz960 MHz

1710 1710 –– 1990 MHz1990 MHz

BTS 1+2 [824BTS 1+2 [824--960 MHz]960 MHz]

BTS 3+4 [1710BTS 3+4 [1710--1990 MHz]1990 MHz]


++

++

Multiple Multiple -- BTSBTS

CombiningCombining

Unit [2+2]Unit [2+2]


Product Descriptionhe Passive Multi Operator Combiner has been designed to allow 4 BTS inputs in 824-960 MHz & 4 BTS inputs in 1710-1990 MHz, while providing 2 combined output ports for Site TSharing and Distributed Antenna System.

The advantage of this is that minimum hardware needs to be installed and a minimum of loss is retained.

PASS

IVE

MU

LTI

OPE

RA

TOR C

OM

BIN

ER

DU

MM

Y L

OA

D

SpecificationsType No. 1227 0844 000Frequency Range 824-960 1710-1990

Technology Supported EGSM,GSM, DCS,PCSCell

Combined Output Ports 2

BTS Input Ports 4 4

VSWR 1.3:1 Max

Insertion Loss 7.0 + 0.5 dB

Impedance 50 Ohms

Termination N-FemaleTotal Power Rating 100 Watts

Isolation > 20 dB

Dimension (mm/inch) 450x 350x150 mm / 18”x14”x6”

Weight (Kgs/lbs) 7 Kgs / 16 lbs Approx



PASSIVE MULTI OPERATOR COMBINER[For Site Sharing & Distributed Antenna System]


(4 + 4)

PASSIVE MULTI OPERATOR COMBINER

BTS 1+2+3+4 [824BTS 1+2+3+4 [824--960 MHz]960 MHz]

BTS 5+6+7+8 [1710BTS 5+6+7+8 [1710--1990 MHz]1990 MHz]


824 824 –– 960 MHz960 MHz

1710 1710 –– 1990 MHz1990 MHz

BTSBTS--11

BTSBTS--22

BTSBTS--33

BTSBTS--44

BTSBTS--55

BTSBTS--66

BTSBTS--77

BTSBTS--88

BTS 1+2+3+4 [824BTS 1+2+3+4 [824--960 MHz]960 MHz]

BTS 5+6+7+8 [1710BTS 5+6+7+8 [1710--1990 MHz]1990 MHz]


++

++

Multiple Multiple -- BTSBTS

CombiningCombining

Unit [4+4]Unit [4+4]

Applications� Transmitter/Combiner Output Termination� Co-axial Line Terminations� Circular Port Terminations

Material � : Aluminium� Finish : Black

Housing

SpecificationsType No. 1156 0002 000Frequency Range 800 – 2500 MHz

Total Power Rating 2 Watts Termination N – Male

Impedance 50 OhmsVSWR 1.2:1 Max

Dimension (mm/inch) 70 x 30 mm / 3”x1.5”

Weight (Kgs/lbs) 0.2 Kgs / 0.5 lbs Approx


o oOperating temperature( C/ F) o o-35 C to 70 C / o o-31 F to 158 F

ØBroad BandwidthØGood VSWR ØUp to 10 W Power Rating

DUMMY LOAD 2 W)

Product Descriptionhese Dummy Loads or Terminating load resistors has been designed to give an economic solution to the growing need for compact, rugged and simple termination suitable for bench T& field use. The Co-axial loads utilize low noise chip resistor. The heat sinks are made of black

finished aluminium for maximum thermal radiation with N-Type Connectors.

DUMMY LOAD (2 W )

3130

DU

MM

Y L

OA

D

www.shyamtelecom.comAll Specifications are subject to change without prior noticeAll Specifications are subject to change without prior noticewww.shyamtelecom.com

DU

MM

Y L

OA

D

hese Dummy Loads or Terminating load resistors has been designed to give an economic solution to the growing need for compact, rugged and simple termination suitable for bench T& field use. The Co-axial loads utilize low noise chip resistor. The heat sinks are made of black




Housing

SpecificationsType No.Frequency Range

Total Power RatingTermination

ImpedanceVSWR

Dimension (mm/inch)

Weight (Kgs/lbs)

Operating Humidity

o oOperating temperature( C/ F)


DUMMY LOAD 10 W)

1156 0011 000800 – 2500 MHz

10 Watts

N – Male

50 Ohms

1.2:1 Max

70 x 30 mm / 3”x2”

0.3 Kgs / 0.6 lbs Approx

5 – 95%

o o-35 C to 70 C / o o-31 F to 158 F

Product Description

DUMMY LOAD (10 W) DUMMY LOAD




VSWR

Total Power Rating

Impedance

Termination

Dimension (mm/inch)

Weight (Kgs/lbs)

Operating Humidity


1156 0025 000800 – 2500 MHz

1.2:1 Max

25 Watts

50 Ohms

N – Male

70 x 101 mm

0.425 Kgs

5 – 95%

o o-35 C to 70 C / o o-31 F to 158 F



Housing


(25 W)

DUMMY LOAD (25 W )

33

DU

MM

Y L

OA

D

www.shyamtelecom.comAll Specifications are subject to change without prior noticeAll Specifications are subject to change without prior notice

DU

MM

Y L

OA

D

www.shyamtelecom.com32

DUMMY LOAD




VSWR

Total Power Rating

Impedance

Termination

Dimension (mm/inch)

Weight (Kgs/lbs)

Operating Humidity




Housing


(50 W)

1156 0051 000800 – 2500 MHz

1.2:1 Max

50 Watts

50 Ohms

N – Male

70 x 125 mm / 2.7”x4.9”


5 – 95%

o o-35 C to 70 C / o o-31 F to 158 F

DUMMY LOAD (50 W)

DUMMY LOAD




VSWR

Total Power Rating

Impedance

Termination

Dimension (mm/inch)

Weight (Kgs/lbs)

Operating Humidity




Housing


(100 W)

1156 0100 000800 – 2500 MHz

1.2:1 Max

50 Watts

50 Ohms

N – Male

70 x 125 mm / 2.7”x4.9”


5 – 95%

o o-35 C to 70 C / o o-31 F to 158 F

DUMMY LOAD (100 W)


ATT

ENU

ATO

R

www.shyamtelecom.com All Specifications are subject to change without prior notice 35

ATT

ENU

ATO

R


Product Description

Applications�Equipment Protection�Transmitter/combiner power level adjustment

These Attenuators has been designed to give an economic solution to the growing need for compact, rugged and simple attenuation suitable for bench & field use. These attenuators use chip resistors for attenuation.The heat sinks are made of black finished aluminium for maximum thermal radiation with N-Typeconnectors.

Ø Broad BandwidthØ Good VSWRØ Up to 100 W Power Rating

Specifications

Type No.

ATTENUATOR (100 W)

(100 W)

Frequency Range

Attenuation

VSWR

Impedance

Termination

Total Power Rating

Dimension (mm/inch)

Weight (Kgs/lbs)

Operating Humidity



Housing

1157 0003 000

DC 2500 MHz

3 dB

1.2:1 Max

50 Ohms

N(M) – N(F)

100 Watts

70 x 160 mm / 2.7”x 6”


5 – 95%

o o o o-35 C to 70 C / -31 F to 158 F

ATTENUATOR (3 dB) ATTENUATOR

Product Description




Specifications

Type No.

ATTENUATOR (100 W)

(100 W)

Frequency Range

Attenuation

VSWR

Impedance

Termination

Total Power Rating

Dimension (mm/inch)

Weight (Kgs/lbs)

Operating Humidity



Housing

1157 0006 000

DC 2500 MHz

6 dB

1.2:1 Max

50 Ohms

N(M) – N(F)

100 Watts

70 x 160 mm / 2.7”x 6”


5 – 95%

o o o o-35 C to 70 C / -31 F to 158 F

(6 dB)

All Specifications are subject to change without prior notice 37

ATT

ENU

ATO

R

www.shyamtelecom.com36 All Specifications are subject to change without prior notice

ATT

ENU

ATO

R


ATTENUATOR

Product Description




Specifications

Type No.

(100 W)

Frequency Range

Attenuation

VSWR

Impedance

Termination

Total Power Rating

Dimension (mm/inch)

Weight (Kgs/lbs)

Operating Humidity


1157 0010 000

DC 2500 MHz

10 dB

1.2:1 Max

50 Ohms

N(M) – N(F)

100 Watts

70 x 160 mm / 2.7”x 6”


5 – 95%

o o o o-35 C to 70 C / -31 F to 158 F


Housing

(10 dB)

ATTENUATOR (100 W)

ATTENUATOR

Product Description


hese Attenuators has been designed to give an economic solution to the growing need for compact, rugged and simple attenuation suitable for bench & field use. These attenuators Tuse chip resistors for attenuation.

The heat sinks are made of black finished aluminium for maximum thermal radiation with N-Typeconnectors.


Specifications

Type No.

(100 W)

Frequency Range

Attenuation

VSWR

Impedance

Termination

Total Power Rating

Dimension (mm/inch)

Weight (Kgs/lbs)

Operating Humidity



Housing

1157 0020 000

DC 2500 MHz

20 dB

1.2:1 Max

50 Ohms

N(M) – N(F)

100 Watts

70 x 160 mm / 2.7”x 6”


5 – 95%

o o o o-35 C to 70 C / -31 F to 158 F

(20 dB)

ATTENUATOR (100 W)

All Specifications are subject to change without prior notice 39www.shyamtelecom.com30 All Specifications are subject to change without prior noticewww.shyamtelecom.com

ATT

ENU

ATO

R

38

ATTENUATOR

Product Description


hese Attenuators has been designed to give an economic solution to the growing need for compact, rugged and simple attenuation suitable for bench & field use. These attenuators Tuse chip resistors for attenuation.

The heat sinks are made of black finished aluminium for maximum thermal radiation with N-Typeconnectors.


Specifications

Type No.

(100 W)

Frequency Range

Attenuation

VSWR

Impedance

Termination

Total Power Rating

Dimension (mm/inch)

Weight (Kgs/lbs)

Operating Humidity



Housing

1157 0030 000

DC 2500 Mhz

30 dB

1.2:1 Max

50 Ohms

N(M) – N(F)

100 Watts

70 x 160 mm / 2.7”x 6”


5 – 95%

o o o o-35 C to 70 C / -31 F to 158 F

(30 dB)

ATTENUATOR (100 W)

Material � Radiator : Low Loss Circuit Board� Base : Aluminium� Radome : ABS� Colour : White

Multi Band Omni Ceiling Antenna [ Cable ]

Mounting� Three holes in the base plate, enable mounting on the ceiling (Three screws are supplied).� For N- Connector 35mm dia hole in the ceiling is required.

SpecificationsType No. 1171 2000 000Frequency Range 800 – 960 / 1710 – 2500

2 dBi / 4 dBiGain

1710 – 2500 / 4 dBi

VSWR 806 – 2500 MHz : < 1.4Impedance 50 Ohms

Power Rating 100 Watts

Polarization Vertical

Termination 9 inch Cable (N-Female)

Horizontal Beamwidth o360

Vertical Beamwidth o90

Weight (Kgs / lbs) 0.210 Kgs

Dimension H x D (mm/inch) 166x146.2 mm / 4”x8”

ØWide Bandwidth OperationØOmni Directional Radiation Pattern ØEasy to Install

Ceiling mounted omni antennas for CDMA 800, GSM 900, DCS, PCS, UMTS and WiFi bands are now available especially for micro-cell and In-building applications. This antenna can be operated in all frequency ranges simultaneously & needs no additional ground plane.

MULTI BAND OMNI CEILING ANTENNA [Cable Type]

Product Description

MULTI BAND OMNI CEILING ANTENNA

Elevation Pattern

120

90

60

Phi = 90

30

00 10-10-20

[dBi]

30

Phi = 270

60

90

120

150

150

180

(800 – 2500 MHz)

For Installation Please Refer Page 49 - 50

Operating Humidity

Operating o otemperature( C/ F)

5 – 95%

o o-35 C to 70 C / o o-31 F to 158 F

MU

LTI

BAN

D O

MN

I C

EILI

NG

AN

TEN

NA

All Specifications are subject to change without prior notice 41www.shyamtelecom.comAll Specifications are subject to change without prior noticewww.shyamtelecom.com

PATC

H P

AN

EL D

IREC

TIO

NA

L A

NTE

NN

A

40

PATCH PANEL DIRECTIONAL ANTENNA

Material � Radiator : Aluminium� Radome : ABS� Colour : White

Mounting� Mounting Plate : Stainless Steel� Two holes of 6mm diameter in the mounting plate.

ØWide Bandwidth OperationØDirectional Radiation Pattern ØEasy to InstallØAdditional Painting is Possible

Product DescriptionIndoor Directional Antenna

Specifications

Type No. 1171 0400 000Frequency Range (MHz) 800 – 960 & 1710 – 2500

8 dBi MaxGainVSWR 1.3 : 1 MaxImpedance 50 Ohms



Termination N-Female 9 inch Cable

Horizontal Beamwidth o90Vertical Beamwidth o65

Weight (Kgs / lbs) 0.6 kgs / 1.5 lbs Approx

Packing Size (mm/inch) 310x180x65mm / 12”x7”x2”

Dimension (mm / inch) 220x160x50mm / 9”x6”x2”

for CDMA 800, GSM 900 and GSM 1800 / PCS / UMTS for micro-cell and in-building applications. This antenna can be operated in all frequency ranges simultaneously and needs no additional ground plane.

iDEN,

INDOOR DIRECTIONAL ANTENNA

(800 - 2500 MHz)

Azimuthal Pattern

0

-6

-12

-18

-24

-30

-36

330

300

270

240

210

180

150

120

60

30

90

Elevation Pattern

0

-6

-12

-18

-24

-30

-36

330

300

270

240

210

180

150

120

60

30

90



OUTDOOR DIRECTIONAL ANTENNA

Product Description

Material � Radiator : Brass� Radome : ASA� Colour : Off White

irectional Antenna for GSM, CDMA bands are now available to use as Repeater Outdoor and Indoor Antenna. This antenna can be operated through the frequency range Dsimultaneously and needs no additional ground plane.

Mounting� Adjustable Wall Mounting & Tilting Kit� Material : ASA

Specifications


7 dBi MaxGainVSWRImpedance 50 Ohms



Termination SMA(F)


Weight (Kgs / lbs) 0.5 Kgs / 1 lbs Approx


ØWide Bandwidth OperationØDirectional Radiation Pattern ØEasy to Install


(824 - 960 MHz)

Front to Back Ratio Min 15 dB

0

-6

-12

-18

-24

-30

-36

330

300

270

240

210

180

150

120

60

30

90

Elevation Pattern

Azimuthal Pattern

0

-6

-12

-18

-24

-30

-36

330

300

270

240

210

180

150

120

60

30

90




1.8

OU

TDO

OR D

IREC

TIO

NA

L A

NTE

NN

A

42 All Specifications are subject to change without prior noticewww.shyamtelecom.com All Specifications are subject to change without prior notice

OU

TDO

OR D

IREC

TIO

NA

L A

NTE

NN

A

www.shyamtelecom.com 43


Product Description

Material � Radiator : Brass� Radome : ASA� Colour : Off White

irectional Antenna Outdoor and Indoor Antenna. This antenna can be operated through the frequency range Dsimultaneously and needs no additional ground plane.

for PCS, DCS & UMTS bands are now available to use as Repeater

Mounting� Adjustable Wall Mounting & Tilting Kit� Material : ASA

Specifications


9 dBi MaxGainVSWR 1.5 : 1 MaxImpedance 50 Ohms



Termination SMA(F)



Weight (Kgs/lbs) 0.2 kgs / 0.5 lbs Approx

Front to Back Ratio Min 15 dB

ØWide Bandwidth OperationØDirectional Radiation Pattern ØEasy to Install


( )1710 – 2170 MHz

Elevation Pattern

Azimuthal Pattern

0

-6

-12

-18

-24

-30

-36

330

300

270

240

210

180

150

120

60

30

90

0

-6

-12

-18

-24

-30

-36

330

300

270

240

210

180

150

120

60

30

90




OUTDOOR DUAL BAND DIRECTIONAL ANTENNA

Product Description

Material � Radiator : Low Loss Circuit Board� Radome : ASA� Colour : Off White

irectional Antenna use as Repeater Outdoor and Indoor Antenna. This antenna can be operated through the Dfrequency range simultaneously and needs no additional ground plane.

for GSM/CDMA bands & PCS, DCS, UMTS bands are now available to

Mounting�Adjustable Wall Mounting & Tilting Kit� Material : ASA

Specifications

Type No. 1171 2004 000Frequency Range 824 – 960 & 1710 – 2170 MHz

824 – 960 / 7 dBi Max.

1710 – 2170 / 9dBi Max

1710 – 2170 / 1.5:1 Max

Gain

VSWR 824 – 960 / 1.8:1 Max

Impedance 50 Ohms



Termination SMA(F)


Weight (Kgs / lbs) 0.5 Kgs / 1 lbs Approx


ØDual Band OperationØDirectional Radiation Pattern ØEasy to Install

DUAL BAND DIRECTIONAL ANTENNA

( )824 – 960 & 1710 – 2170 MHz



Elevation Pattern

Azimuthal Pattern

0

-6

-12

-18

-24

-30

-36

330

300

270

240

210

180

150

120

60

30

90

0

-6

-12

-18

-24

-30

-36

330

300

270

240

210

180

150

120

60

30

90

0

-6

-12

-18

-24

-30

-36

330

300

270

240

210

180

150

120

60

30

90

Elevation Pattern

Azimuthal Pattern

0

-6

-12

-18

-24

-30

-36

330

300

270

240

210

180

150

120

60

30

90

900 MHz 1800 MHz


DU

AL

BAN

D D

IREC

TIO

NA

L A

NTE

NN

A

All Specifications are subject to change without prior noticeAll Specifications are subject to change without prior notice www.shyamtelecom.comwww.shyamtelecom.com44 45

Product Description

Material � Aluminium : Mech. Hardware� Colour : Off White� Mounting Clamp : Stainless steel

utdoor Yagi Antenna applications to use as Outdoor Donor Antenna.O for DCS / PCS in 1710 - 2200 are now available for in-building

Mounting�Fixtures for 20-40mm diameter pipe is provided.

Specifications


10 dBi Max.GainVSWR 1.5 : 1 Max

Impedance 50 Ohms



Termination 0.6 Mtr Cable with N(F) Connector



ØNarrow BeamwidthØMinimum VSWR PerformanceØEasy to Install ØOutdoor Donor Applications

OUTDOOR YAGI ANTENNA




Wind Survival Rating 200 Km/H



(1800/10)

Elevation Pattern

Azimuthal Pattern

0

20

40

60

80

100

120

140

160

180

200

220

240

260

280

300

320

340 0

-10

-20

-30

-40

0

20

40

60

80

100

120

140

160

180

200

220

240

260

280

300

320

340 0

-10

-20

-30

-40

(1710 – 2170 MHz)


OU

TDO

OR Y

AG

I A

NTE

NN

A

OUTDOOR YAGI ANTENNA (900/12)

Product Description


utdoor Yagi Antenna applications to use as Outdoor Donor Antenna.O for CDMA / GSM in 806 - 960 are now available for in-building

Mounting�Fixtures for 20-40mm diameter pipe is provided.


Specifications

Type No. 1171 0002 090

Frequency Range 806 – 960 MHz

12 dBi Max.Gain

VSWR 1.5 : 1 Max

Impedance 50 Ohms





Dimension (mm/inch) 1050x210x20 mm/ 41”x8”x1”







Elevation Pattern

Azimuthal Pattern

0

20

40

60

80

100

120

140

160

180

200

220

240

260

280

300

320

340 0

-10

-20

-30

-40

0

20

40

60

80

100

120

140

160

180

200

220

240

260

280

300

320

340 0

-10

-20

-30

-40

(806 – 960 MHz)

OU

TDO

OR Y

AG

I A

NTE

NN

A

All Specifications are subject to change without prior noticeAll Specifications are subject to change without prior notice www.shyamtelecom.comwww.shyamtelecom.com

QU

AD

BA

ND

YA

GI

AN

TEN

NA

OU

TDO

OR Y

AG

I A

NTE

NN

A

46 47


Product Descriptionutdoor Dual Band Yagi Antenna building applications to use as Outdoor Donor Antenna.O for GSM 900 & DCS 1800 are now available for in-

Mounting� Fixtures for 20-40mm diameter pipe is provided.



OUTDOOR YAGI ANTENNA [DUAL BAND]

Specifications

Type No. 1171 2003 000

Frequency Range 890 – 960 / 1710 – 1880 MHz

890 – 960 / 7 dBi Max.Gain1710 – 1880 / 9dBi Max.

VSWR 2.0 : 1 Max

Impedance 50 Ohms





Dimension (mm/inch) 1050x210x20 mm/ 41”x8”x1”






OUTDOOR YAGI ANTENNA DUAL BAND

Elevation Pattern

Azimuthal Pattern

0

20

40

60

80

100

120

140

160

180

200

220

240

260

280

300

320

340 0

-10

-20

-30

-40

0

20

40

60

80

100

120

140

160

180

200

220

240

260

280

300

320

340 0

-10

-20

-30

-40

(900 & 1800 MHz)

Product Descriptionutdoor Quad Band Yagi Antenna available for in-building applications to use as Outdoor Donor Antenna.O for IDEN/ GSM/ DCS /PCS/ UMTS & Wifi band is now

Mounting� Fixtures for 20-40mm diameter pipe is provided.


Material � Radiating Element : Aluminium� Aluminium : Mech. Hardware� Colour : Off White� Mounting Clamp : Stainless steel

QUAD BAND YAGI ANTENNA

Specifications

Type No. 1171 2009 000


8.5 dBi / 11dBi Max.Gain

VSWR <1.5

Impedance 50 Ohms



Termination N(Female)


Dimension (mm/inch) 480 x 330 x 90mm





oOperating temperature( C ) o o-35 C to 70 C

QUAD BAND YAGI ANTENNA

(800 & 2500 MHz)

All Specifications are subject to change without prior notice www.shyamtelecom.comAll Specifications are subject to change without prior noticewww.shyamtelecom.com48 49

OUTDOOR REPEATER SERVER ANTENNA

Product Description

Material s s Radome : ASA UV Resistants Colour : Light Grey

Radiator : Aluminium

utdoor Directional Antennas consistent & repeatable RF performance. O

These antennas can be used as Outdoor Repeater server antennas for Cellular Networks.

feature advanced array design techniques; assuring

Mountings Mechanically Tiltable, Aluminium

ØHigh Front to Back RatioØMinimum VSWR PerformanceØExcellent Upper Side Lobe SuppressionØOutdoor Repeater Server ApplicationsØAll Metals Parts are DC Grounded

Specifications

Type No. 1171 1000 000


16 dBi Max.Gain

VSWR 1.5 : 1 Max

Impedance 50 Ohms



Termination N Connector(F)




Front to Back Ratio 40 dB

Weight (Kgs/lbs) 5.5 kgs / 12 lbs Approx




OUTDOOR REPEATER SERVER ANTENNA

Elevation Pattern

Azimuthal Pattern

0

-8

-16

-24

-32

-40

0

330

300

270

240

210

180

150

120

60

30

90

0

-8

-16

-24

-32

-40

0

330

300

270

240

210

180

150

120

60

30

90

(806 – 960 Mhz)


OU

TDO

OR R

EPEA

TER S

ERV

ER A

NTE

NN

A

Yagi Antenna

U - Bolt

Repeater Server Antenna

Mechanical Down tilt Kit

Nut

Yagi Antenna

Bolt Nut

Repeater Server Antenna

Bolt

Patch Panel Antenna

Elevation Tilting KitPole Mounting Kit

Installation-Pole Mountable Antennas

Installation-Pole Mountable Antennas

Installation-Pole / Wall Mountable Antennas Multi Band Omni Ceiling Antenna

AN

TEN

NA

IN

STA

LLA

TIO

N

All Specifications are subject to change without prior noticeAll Specifications are subject to change without prior notice www.shyamtelecom.comwww.shyamtelecom.com 5150

AN

TEN

NA

IN

STA

LLA

TIO

N

AN

TEN

NA

IN

STA

LLA

TIO

N

Mounting & Tilting Kit

Directional Patch Antenna 900

Plastic plug

Self thread screws


Mounting & Tilting Kit

Plastic plug

Self thread screws



Installation-Wall Mountable Antennas

Installation-Wall Mountable Antennas

PART NO REFERENCE

DIPLEXERSDiplexer [824-960 & 1710-1990]Diplexer [890-960 MHZ,1710 - 1880]Diplexer [880-960 MHZ,1920- 2170 Mhz ]

1903 0909 2001903 0909 0001903 0909 000

TRIPLEXERSTriplexer824-960,1710-1990,2400-2500Triplexer 880-960 MHZ,1710 - 1880 or1920 - 2170 Mhz ]

1903 0990 000

1903 9100 000

SPLITTER / COMBINERS2 Way Splitter [800 – 2500 Mhz] 1173 0001 102

3 Way Splitter [ – 2500 Mhz]800 1173 0001 103

4 Way Splitter [ – 2500 Mhz]800 1173 0001 104

COMBINERSCombiner 2 + 2 1227 0422 000

Combiner 4 + 4 1227 0844 000

MULTICASTING MATRIX2 way multicasting matrix 900 1164 0000 102

4 way multicasting matrix (800 - 2500) 1164 0011 104

2 way multicasting matrix 1800 1164 0001 102

2 way multicasting matrix (800 - 2500) 1164 0011 102



DIRECTIONAL COUPLERS

Low Loss Power Tappers, 800-2500 MHz, 7 dB Coupling

1173 000 1071


1173 0001 105


1173 0001 110


1173 0001 115

FILTERSBand Pass Filter 890-960 Mhz 1903 0921 060

Band Pass Filter 2nd Operator GSM 896-915 Mhz

1903 0920 015

Band Pass Filter 890-915 Mhz 1903 0920 050

DIRECTIONAL COUPLERS[For Optical & Frequency Converter Repeaters]

Directional Coupler, 800-2500 MHz – 20/30/40/50 dB

1903 0040 900

Directional Coupler, 1710-1990MHz – 20/30/40/50 dB

1913 0040 900

Directional Coupler, 1920-2170MHz – 20/30/40/50 dB

1943 0030 900

INDOOR ANTENNAS

Multi Band Omni Ceiling [806-2.5G] Cable

1171 2000 000

Patch Panel directional Dual Band Antenna (800 - 2500 MHz)

1171 0400 000

OUTDOOR ANTENNASOutdoor Directional Antenna 900, 7dBi 1171 0500 900

Outdoor Antenna 1800, 9 dBiDirectional 1171 0200 900

Outdoor DB Antenna Directional 1171 2004 000

Outdoor Yagi Antenna Dual Band 1171 2003 000

Outdoor Yagi Antenna 900 1171 0002 090

Outdoor Repeater Server Antenna, 16dBi 1171 1000 000

Quad Band Yagi Antenna 8.5/ 11 dBi 1171 2009 000

Outdoor Yagi Antenna 1800 1171 0003 000

DUMMY LOADSDummy Load 2 W 1156 0002 000

Dummy Load 10 W 1156 0011 000

Dummy Load 25 W 1156 0025 000

Dummy Load 50 W

Dummy Load 100 W

1156 0051 000

1156 0100 000

ATTENUATORAttenuator 3 dB 1157 0003 000Attenuator 6 dB 1157 0006 000Attenuator 10 dB 1157 0010 000Attenuator 20 dB 1157 0020 000Attenuator 30 dB 1157 0030 000

PART

NO

REF

EREN

CE

52 www.shyamtelecom.com All Specifications are subject to change without prior notice All Specifications are subject to change without prior notice 53www.shyamtelecom.com

VSWR CONVERSION CHARTVSWR VSWRReturn

LossReturnLoss

ReflectionCoefficient

ReflectionCoefficient

TransmittedPower Ratio

TransmittedPower Ratio

1.00 1.011.021.031.041.051.061.071.081.091.101.111.121.131.141.151.161.171.181.191.201.211.221.231.241.251.261.271.281.291.301.311.321.331.341.351.361.371.381.391.401.411.421.431.441.451.461.471.481.491.50

1.55 1.601.651.701.751.801.851.901.952.002.052.102.152.202.252.302.352.402.452.502.552.602.652.702.752.802.852.902.953.003.053.103.153.203.253.303.353.403.453.503.553.603.653.703.753.803.853.903.954.004.05

0046.0640.0936.6134.1532.2630.7129.4228.3027.3226.4425.6624.9424.2923.6923.1322.6122.1221.6621.2320.8320.4420.0819.7319.4019.0818.7818.4918.2217.9517.6917.4517.2116.9816.7516.5416.3316.1315.9415.7515.5615.3815.2115.0414.8814.7214.5614.4114.2614.1213.98

13.3212.7412.2111.7311.2910.8810.5110.169.849.549.269.008.758.528.308.097.897.717.537.367.207.046.906.766.626.496.376.256.136.025.915.815.715.625.525.435.355.265.185.115.034.964.884.814.754.684.624.564.504.444.38

0.00000.00500.00990.01480.01960.02440.02910.03380.03850.04310.04760.05210.05660.06100.06540.06980.07410.07830.08260.08680.09090.09500.09910.10310.10710.11110.11500.11890.12280.12660.13040.13420.13790.14160.14530.14890.15250.15610.15970.16320.16670.17010.17360.17700.18030.18370.18700.19030.19350.19680.2000

0.21570.23080.24530.25930.27270.28570.29820.31030.32200.33330.34430.35480.36510.37500.38460.39390.40300.41180.42030.42860.43660.44440.45210.45950.46670.47370.48050.48720.49370.50000.50620.51220.51810.52380.52940.53490.54020.54550.55060.55560.56040.56520.56990.57450.57890.58330.58760.59180.59600.60000.6040

1.000000.999980.999900.999780.999620.999410.999150.998860.998520.998150.997730.997280.996800.996280.995720.995130.994510.993860.993180.992470.991740.990970.990180.989360.988520.987650.986760.985850.984920.983960.982990.981990.980980.979940.978890.977820.976730.975630.974510.973370.972220.971060.969880.968690.967480.966260.965030.963790.962540.961270.96000

0.953480.946750.939840.932780.925620.918370.911050.903690.896290.888890.881480.874090.866720.859380.852070.844810.837600.830450.823380.816330.809360.802470.795650.788900.782220.775620.769100.762660.756290.750000.743790.737660.731600.725620.719720.713900.708150.702480.696880.691360.685910.680530.675220.669990.664820.659720.654690.649730.644830.640000.63523

GLO

SSA

RY

VSW

R C

ON

VER

SIO

N C

HA

RT

GLOSSARYAntennaA passive component which converts wired electrical energy to wireless radio waves and directs them through the air in some pattern.

EIRPEffective Isotropic Radiated Power

FBRFront to back Ratio, The difference (in dB) between power radiated in the boresight of the antenna to that radiated 180 degree behind boresight.

GainIn a given direction, the ratio of radiation intensity in that direction to the net power accepted by the antenna from the connected transmitter.

GSMGlobal System for Mobile Communications; the digital transmission technique widely adopted in Europe and supported in North America for PCS, GSM uses 900 MHz and 1800 MHz in Europe. In North America, GSM uses the 1900 Mhz.

ImpedanceA unit of measure , expressed in Ohms, of the total opposition (resistance, capacitance and inductance) offered to the flow of an alternating current.

IsotropicA hypothetical antenna having equal radiation intensity in all direction.

PolarizationIn a given direction, the polarization of a plane wave incident from the given direction which results in maximum available power at the antenna terminals.

SARSpecific Absorption Rate: the amount of radiation absorbed by the human body (SAR for the entire body) or by the head (local SAR).

VSWRVoltage Standing Wave Ratio, A comparison of power accepted to the power reflected back from the system, generally with respect to a 50 Ohms line impedance. A VSWR of 1.0 is 100% of power accepted by the antenna, a VSWR of 1.5 is 97%, a VSWR of 2.o is 89%.

WavelengthThe ratio of the velocity of the wave to the frequency of the current causing the wave.

WiFiShort for wireless fidelity and is meant to be used generically hen referring of any type of 802.11b, 802.11a, dual band, etc. The term is promulgated by the WiFi Alliance.

Antenna Array An antenna comprising a number of radiating elements, which are arranged and excited to obtain directional radiation pattern.

Axial Ratio A measure of circularity of polarization, related to a Cross polar antenna’s XPD.

Bandwidth The range of frequencies within which the performance of the antenna, with respect to some characteristic, conforms to a specified standard.

Beamwidth The acceptance angle of an antenna, usually measured between half power(3dB) points.

BPF Band Pass Filter

CDMA Code Division Multiple Access, is one of several digital wireless transmission methods in which signals are encoded using a pseudo random sequence that corresponds to a different communication channel.

DBi A ratio of decibels to an isotropic antenna that is commonly used to measure antenna gain.

DBmdB Power relative to one milliwatt

DipoleA type of low gain antenna consisting of two elements

Directional Antenna An antenna having the property of radiating or receiving electromagnetic waves more effectively in some directions than others.

DB Decibels; A means of expressing voltage, power, gain, loss or frequency in logarithmic form against a reference, Typical reference includes volts, watts or Hz.

dB = 10 log (x/y)

Accessories Catalog

Documents

db shyam

db directional coupler

db attenuator

db coupling

dbi outdoor yagi antenna

gsm operator

operator gsm

dbi quad band yagi antenna