EXHAUST 6 335 IMPORTANT INFORMATION RELATING TO EXHAUST PRODUCTS: DISCLAIMER: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, i.e. cam timing, carburetor, etc., and is not caused by defective manufacturing. See the HARDWARE, CHEMICALS & TOOLS section for products that will help prevent or remove blueing. DISCLAIMER: Exhaust systems for OEM non-emission control system equipped motorcycles as well as slip-on mufflers that mount downstream of and which do not inhibit the proper function of emission control systems are considered legal replacement parts by the California Air Resources Board (CARB). CARB does not, however, permit the use of aftermarket exhaust systems that remove or alter OEM emission control devices unless certified by CARB, other than on racing vehicles on closed courses. More California exhaust information is available at www.arb.ca.gov/. DISCLAIMER: Products shown may be designed, manufactured, intended and sold for use on competition vehicles that are operated only on closed course racing circuits unless otherwise noted and use of the same on public roads or lands may be a violation of local, state and/or federal laws. DISCLAIMER: Check your applicable laws and manufacturer’s publication(s) and/or website(s) for manufacturer’s warranty, maintenance, safety, mounting and any regulatory compliance/non-compliance information.
145
Embed
Accessoire Harley-Davidson Piece Moto Custom Pot US Import
Accessoires et Pièces Moto Harley-Davidson Echappement pour Harley Davidson et Moto Custom Accessoires Moto Harley-Davidson Pièces Moto Custom Drag Specialties FatBook 2013 par US Dream Import France
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
EXHAUST 6
335
IMPORTANT INFORMATION RELATING TO EXHAUST PRODUCTS:
DISCLAIMER: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, i.e. cam timing, carburetor, etc., and is not caused by defective manufacturing. See the HARDWARE, CHEMICALS & TOOLS section for products that will help prevent or remove blueing.
DISCLAIMER: Exhaust systems for OEM non-emission control system equipped motorcycles as well as slip-on mufflers that mount downstream of and which do not inhibit the proper function of emission control systems are considered legal replacement parts by the California Air Resources Board (CARB). CARB does not, however, permit the use of aftermarket exhaust systems that remove or alter OEM emission control devices unless certified by CARB, other than on racing vehicles on closed courses. More California exhaust information is available at www.arb.ca.gov/.
DISCLAIMER: Products shown may be designed, manufactured, intended and sold for use on competition vehicles that are operated only on closed course racing circuits unless otherwise noted and use of the same on public roads or lands may be a violation of local, state and/or federal laws.
DISCLAIMER: Check your applicable laws and manufacturer’s publication(s) and/or website(s) for manufacturer’s warranty, maintenance, safety, mounting and any regulatory compliance/non-compliance information.
US Dream Import France (http://www.usdream.fr/)
Zone de texte
Accessoires et Pièces Harley-Davidson Importés par US Dream Import en France Site : http://www.usdream.fr/ Hotline : +33(0)6 60 06 46 59 E-Mail : [email protected]
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
336
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
CHROME
PART # DESCRIPTION SUG. RETAILFOR 12-13 FXS/FLS/FLST MODELS1800-1410 Staggered w/ slash-cut end caps $629.951800-1422 Long w/ straight-cut end caps 703.95FOR 86-11 FXS/FXST/FLST MODELS (EXCEPT 09 FXSTSSE)1800-04471 Staggered 624.951800-04481 Long 699.95FOR 12-13 DYNA MODELS (EXCEPT 12 FLD)1800-1411 Staggered w/ slash-cut end caps 629.951 Pre 07 models will require O
2 sensor port plug kit PART #1861-0464
(sold separately).
PART # DESCRIPTION SUG. RETAILREPLACEMENT/OPTIONAL END CAPS/BAFFLES FOR BIG SHOTS STAGGERED AND LONGSV16917 Slash billet end caps (pr.) $89.95V16919 Straight billet end caps (pr.) 59.95V21869 Quiet Baffle, 2-3 dB quieter (ea.) 29.951861-0477 Repl. standard baffle (ea.) 28.95
1 Pre 07 models will require O2 sensor port plug kit PART #1861-0464
(sold separately).
BIG SHOTS STAGGERED AND LONG•Feature the revolutionary Power Chamber™ design; a unique cross-over system that increases horsepower and torque
•Armed with full-coverage 21/2” heat shields that are essentially blue-proof for long-lasting style
•Like all Vance & Hines systems, these feature a superior fit and an unrivaled finish in either chrome or race-quality black ceramic coat
•New flat plane mounting panel for the 12mm oxygen sensors now featured across the 12-13 Softail/Dyna model lines; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM
•Meticulously finished billet end caps•Removable baffles and all mounting hardware included•Made in the U.S.A.
NOTE: Will not fit models with kickstarts.
1800-1410
1800-1411
1800-1412
1800-1413
1800-1422
V16917 Power Chamber
1861-0477
V21869
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
337
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILCHROME1800-1006 For 08-11 FXCW/C, 09 FXSTSSE models $719.951800-1482 For 12-13 FXS/FLS/FLST models 724.951800-04411 For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) 719.951800-14842 For 12-13 FXDB/FXDF models 724.951800-04422 For 06-11 FXDB/FXDF models 719.951620-0509 Optional left passenger peg relocation
kit for 86-11 Softail models 21.95
PART # DESCRIPTION SUG. RETAILBLACK1800-1483 For 12-13 FXS/FLS/FLST models $824.951800-10171 For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) 819.951800-14852 For 12-13 FXDB/FXDF models 824.951800-10222 For 06-11 FXDB/FXDF models 819.951620-0509 Optional left passenger peg relocation
kit for 86-13 Softail models 21.95
BIG RADIUS 2-INTO-1•Traditionally viewed as the kind of pipe merely designed for performance, Big Radius 2-into-1 breaks the mold, delivering white-knuckle performance with the style that has won over the motorcycle public
•Incorporating blue-proof technology across the entire length of the pipe, Big Radius 2-into-1 will keep its showroom finish whether at the dragstrip or on the boulevard
•Includes mounts for factory O2 sensors as required
•Optional left passenger peg relocation kit for 86-13 Softail models matches left peg to right peg’s position after installation of Big Radius
•Made in the U.S.A.
NOTE: Not for Softail models with Heritage-style saddlebags.
1 Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately).
2 Will also fit FXD/FXDC/FXDL/FXDWG if passenger pegs are removed.
1800-1006
1800-1485
1800-1482
1800-1017
1800-1484
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
338
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR HARLEY-DAVIDSON MODELS, CHROME1800-0994 For 08-11 FXCW/C, 09 FXSTSSE $699.951800-1408 For 12-13 FXS/FLST 704.951800-04461 For 86-11 FXS/FLS/FXST/FLST (except 09 FXSTSSE) 699.951800-1409 For 12-13 Dyna (except 12-13 FLD) 704.951800-0239 For 06-11 Dyna 699.951800-0083 For 91-05 Dyna 679.951800-1215 For 10-13 FLHT, FLTR, FLHX, FLHR 699.951800-1067 For 09 FLHT, FLTR, FLHX, FLHR 699.95
PART # DESCRIPTION SUG. RETAIL
FOR HARLEY-DAVIDSON MODELS, CHROME (CONT)1800-0748 For 07-08 FLHT, FLTR, FLHX, FLHR $699.951800-0955 For 99-06 FLHT, FLHR, FLHX, FLTR 679.951800-12171 For 04-13 XL 599.951620-0510 Optional left passenger peg relocation kit for 99-09 FL 21.95FOR HARLEY-DAVIDSON MODELS, BLACK1800-0995 For 08-11 FXCW/C, 09 FXSTSSE 799.951800-1421 For 12-13 FXS/FLST 804.951800-07461 For 86-11 FXS/FLS/FXST/FLST (except 09 FXSTSSE) 799.95
BIG RADIUS•Big 21/2” full header and muffler heat shield system is virtually blue-proof
•Chrome pipes feature scalloped tips for a unique look (except XL which are slash-cut)
•Black pipes are all slash-cut and feature heat shields coated with a race-quality black ceramic contrasted with a signature chrome badge and tips (except XL)
•Removable baffles and mounting hardware included•New flat plane mounting panel for the 12mm oxygen sensors now featured across the 12-13 Softail/Dyna model lines; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM
•Optional left passenger peg relocation kit for 99-09 FL models (PART #1620-0510) matches left peg to right peg’s position after installation of Big Radius
•Made in the U.S.A.
1800-1067
1800-1408
1800-1421
1800-0746
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
339
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
1800-05841 For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) $554.95
PART # DESCRIPTION SUG. RETAIL
1800-05861 For all 04-13 XL $554.95
Q-SERIES DOUBLE BARREL•A quieter standard, that’s what the Q series is all about, plus they’re loaded with other features
•100% blue-proof technology with 220° head pipe and muffler heat shields
•Proprietary Power Chamber technology for the right horsepower and torque gains all the way through the power band
•Slash-cut ends to finish off the look•Made in the U.S.A.
1 Pre 07 models will require O2 sensor port plug kit PART # 1861-0464 (sold separately).
1800-0956
1800-0584
1800-0586
1800-1218
PART # DESCRIPTION SUG. RETAIL
FOR HARLEY-DAVIDSON MODELS, BLACK (CONT)1800-1420 For 12-13 Dyna (except 12-13 FLD) $804.951800-0956 For 06-11 Dyna 799.951800-1068 For 09 FLHT, FLTR, FLHX, FLHR 799.951800-0957 For 07-08 FLHT, FLTR, FLHX, FLHR 799.951800-12181 For 04-13 XL 679.951620-0510 Optional left passenger peg relocation kit for 99-09 FL 21.95FOR BIG DOG MOTORCYCLES™ RIGHT SIDE DRIVE MODELS, CHROME1800-0592 For 06-10 K9, Mastiff (carb models only) 679.95
1 Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately).
BIG RADIUS (CONT)
1800-1068
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
340
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILCHROME1800-0264 For 06-11 Dyna models $648.951800-07501 For 04-13 XL models 599.951861-0072 Quiet baffle (ea.) 36.95
PART # DESCRIPTION SUG. RETAILBLACK1800-07441 For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) $719.951800-0753 For 06-11 Dyna models 719.951800-07511 For 04-13 XL models 688.951861-0072 Quiet baffle (ea.) 36.95
SIDESHOTS•Feature Vance & Hines’ Power Chamber technology•Massive 220° full-length 21/2” header pipe and muffler heat shield•Twin slash-cut end caps finish off the look•Removable baffles and mounting hardware included•Black systems feature full coverage heat shields coated with a race-quality black ceramic, contrasted with a signature chrome badge and tips
•Made in the U.S.A.
1 Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately).
1800-0744
1800-0751
1800-0753
1800-0264
1861-0072
Power chamber
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
341
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
SHORTSHOTS STAGGERED•A revolution in blue-proof exhaust technology, Vance & Hines delivers the short, fat, straight-pipe look with twin slash-cut ends
•High style and performance combined with unbeatable value•13/4” headpipes with 220° coverage heat shields•New flat plane mounting panel for the 12mm oxygen sensors now featured across the 12-13 Softail/Dyna model lines; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM
•Includes removable baffles, mounting hardware and instructions•Black pipes feature full coverage heat shields coated with a race-quality black ceramic contrasted with a signature chrome badge and end tips•Made in the U.S.A.
1800-0154
1800-0745
1800-0793
1800-1367
1800-1414
1800-1417
1800-0467
1861-0072
PART # DESCRIPTION SUG. RETAILCHROME1800-1414 For 12-13 FXS/FLS/FLST $384.951800-1209 For 08-11 FXCW/C models, 09 FXSTSSE 379.951800-04521 For 86-11 FXS/FXST/FLST models
(except 09 FXSTSSE) 379.951800-1416 For 12-13 Dyna models (except 12-13 FLD) 384.951800-0263 For 06-11 Dyna models 379.951800-0154 For 91-05 Dyna Glide models 359.951800-04671 For 04-13 XL models 379.951800-1367 For 99-03 XL models 379.951861-0072 Quiet Baffle (ea.) 36.95
PART # DESCRIPTION SUG. RETAILBLACK1800-1415 For 12-13 FXS/FLS/FLST $464.951800-07451 For 86-11 FXS/FXST/FLST models
(except 09 FXSTSSE) 459.951800-1417 For 12-13 Dyna models (except 12-13 FLD) 464.951800-0793 For 06-11 Dyna models 459.951800-07521 For 04-13 XL models 459.951861-0072 Quiet Baffle (ea.) 36.951 Pre 07 models will require O
2 sensor port plug kit PART #1861-0464
(sold separately).
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
342
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
V17209 For 86-06 Softail models $328.95V17205 For 91-05 Dyna Glide models (except 03-05 FXDWG) 329.95
PART # DESCRIPTION SUG. RETAIL
V17207 For 87-99 FXR models $328.95V21867 Repl. baffle w/ end cap (ea.) 32.95
SHORTSHOTS ORIGINAL•Share many of the famed Straightshots features, except in a shorty version for a short-piped, hot-rod-bike look
•The 13/4” pipes exit at the end of the frame just in front of the rear wheel
•Full coverage shields; 220° plasma-cut heat shields run all the way back to the meticulously finished end caps
•Include removable baffles and mounting hardware•Made in the U.S.A.
NOTE: Will not fit models with kickstarts.
V17209
V21867
V17205
V17207
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
343
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
1800-12081 For 86-11 FXS/FXST/FLST, 10-11 FLSTSE models (except 09 FXSTSSE) $424.951800-1222 For 06-11 Dyna models 424.951800-12161 For 04-13 XL models 424.951861-0477 Repl. baffle for PART #s 1800-1216, 1800-1222 (ea.) 28.95V21869 Opt. quiet baffle (ea.) 29.951 Pre 07 models will require O
2 sensor port plug kit PART #1861-0464 (sold separately).
STRAIGHTSHOTS•21/4” mufflers are welded to 13/4” head pipes; all are covered by one-piece, large 21/2” full-coverage, full-length chrome header/muffler heat shields that are virtually blue-proof
•Feature the traditional Vance & Hines hot-rod sound•Removable baffles and mounting hardware included•Made in the U.S.A.
NOTE: Will not accept Hot Tips.
V218691800-1216
1800-1208
1800-1222
1861-0477
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
344
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
1801-0258 For 07-13 FXST/C, FLST/C, 08-11 FXCW/C $299.951801-0110 For 00-06 FXST/C, FLST/C 289.951801-0259 For 07-13 FLSTF, FXSTD 299.951801-0260 For 05-13 FLSTN, 08-11 FLSTSB, 12-13 FLS 299.95
STRAIGHTSHOTS SLIP-ONS•Superior performance and style without breaking the bank•Straightshots HS Slip-ons offer the same great look and sound riders have grown to love from Vance & Hines at an unbelievable value•Drenched in Vance & Hines show-quality chrome, massive 21/2” diameter plasma arc-cut, 220° full-coverage muffler heat shields house the Straightshots HS Slip-ons and make them blue-proof for long-lasting style
•Race-inspired performance and traditional hot rod sound set this system apart•Mount to the stock-header pipes with no modifications•Includes removable baffles and all the mounting hardware for a hassle-free, perfect fit every time•Made in the U.S.A.
1801-0258
1801-0259
1801-0260
1801-0111
1801-0088 V21869
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
345
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
V16805 For 91-05 Dyna Glide models (except FXDX/FXDXT) $445.95V16809 For 86-03 XL models (except 883C and 1200C) 445.95
PART # DESCRIPTION SUG. RETAIL
V16811X For 99-03 XL 883C and 1200C models $749.95V21269 Repl. baffle (ea.) 24.95
STRAIGHTSHOTS ORIGINAL•All Straightshots feature full-length, chrome 220° coverage heat shields that are each plasma-arc cut from a full piece of tubing that matches the bodies exactly for a perfect, non-blueing, fat pipe look
•Feature 13/4” headpipes with 21/4” bodies•Customize Straightshots with one of the unique, optional, plasma-arc cut Hot Tips that can be mounted and rotated in two different angles for different looks; or run Straightshots straight
•Hot Tips are available separately and sold in pairs
•Removable baffles provide powerful sound but tone down the bark of normal straight pipes
•Systems include all necessary mounting hardware and instructions for a hassle-free, perfect fit every time
•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
16901 Velocity long-style Hot Tips $49.9516903 Vortex-style Hot Tips 49.95
PART # DESCRIPTION SUG. RETAIL
16905 Viper-style Hot Tips $49.95V16913 Billet-style Hot Tips 112.95
HOT TIPS FOR STRAIGHTSHOTS ORIGINAL SYSTEMS•Interchangeable Hot Tips let you change the look of the bike several different ways in minutes•Each Hot Tip is either custom plasma-arc cut from tubing or machined from billet aluminum for a look that can’t be matched by others•Hot Tips can be mounted and rotated to two different angles to highlight their one-of-a-kind designs•Beautiful chrome finish tops off each Hot Tip•Sold in pairs•Made in the U.S.A.
16901 16903 16905 V16913
V16805
V16811X
V16809
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
346
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
1800-0017 For 86-06 Softail models $579.95
PART # DESCRIPTION SUG. RETAIL
V21869 Optional quiet baffle (ea.) $29.95
LONGSHOTS HS•Large 21/2” full-coverage header and muffler heat shields are virtually blue-proof
•Feature the traditional Vance & Hines hot-rod sound•Scalloped slash-cut ends•Removable baffles and mounting hardware included•Made in the U.S.A.
NOTE: Will not accept Hot Tips.
PART # DESCRIPTION SUG. RETAIL
V17811 For 86-06 Softail models $474.95V17805 For 91-05 Dyna Glide models 474.95
PART # DESCRIPTION SUG. RETAIL
V21269 Repl. baffle (ea.) $24.95
LONGSHOTS ORIGINAL•Feature 13/4” headpipes with 21/4” bodies•Include full-length, 220° coverage heat shields that are plasma-arc cut from a full piece of tubing that matches the bodies exactly for a perfect, non-blueing fat pipe look
•Removable baffles provide powerful sound but tone down the bark of normal straight pipes
•Customize your Longshots with optional plasma-cut Hot Tips that can be mounted and rotated to two different angles
•Hot Tips are available in several styles and are sold separately in pairs•Systems include all necessary mounting hardware and instructions
PART # DESCRIPTION SUG. RETAIL
16901 Velocity long-style Hot Tips $49.9516903 Vortex-style Hot Tips 49.95
PART # DESCRIPTION SUG. RETAIL
16905 Viper-style Hot Tips $49.95V16913 Billet-style Hot Tips 112.95
HOT TIPS FOR LONGSHOTS ORIGINAL SYSTEMS•Interchangeable Hot Tips let you change the look of the bike several different ways in minutes
•Each Hot Tip is either custom plasma-arc cut from tubing or machined from billet aluminum for a look that can’t be matched by others
•Hot Tips can be mounted and rotated to two different angles to highlight their one-of-a-kind designs
•Beautiful chrome finish tops off each Hot Tip•Sold in pairs•Made in the U.S.A.
16901 16903
16905 V16913
V21869
1800-0017
V17805
V17811
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
347
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILCHROME1800-1470 For 12-13 FXS/FLS/FLST $604.951800-12061 For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE)1 599.951800-1207 For 08-11 FXCW/C, 09 FXSTSSE models 599.951800-1493 For 12-13 Dyna models (except 12-13 FLD) 604.951800-1517 For 12-13 FLD 604.951800-1221 For 06-11 Dyna models 599.951800-1210 For 10-13 FLHT, FLHR, FLHX, FLTR models 599.951800-1211 For 09 FLHT, FLHR, FLHX, FLTR models 599.951800-12121 For 99-08 FLHT, FLHR, FLHX, FLTR models 599.95
PART # DESCRIPTION SUG. RETAILBLACK1800-1473 For 12-13 FXS/FLS/FLST $749.951800-14761 For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) 749.951800-1474 For 12-13 Dyna models (except 12-13 FLD) 749.951800-1477 For 06-11 Dyna models 749.951800-1475 For 10-13 FLHT, FLHR, FLHX, FLTR models 749.951800-14781 For 99-08 FLHT, FLHR, FLHX, FLTR models 749.95OPTIONAL COMPONENTS1861-0709 Opt. competition baffle (ea.) 94.951861-0793 Opt. quiet baffle (ea.) 95.95
1 Non-sensor applications will require O2 sensor port plug kit PART #1861-0464 (sold separately).
PRO PIPE•Includes tuned length stepped headers with a highly efficient merge collector that feeds into the stepped 41/2” megaphone design
•Complete with header and collector heat shields, as well as a shield over the first step of the megaphone; also features a CNC-machined chrome plated billet end cap
•New flat plane mounting panel for the 12mm oxygen sensors now featured across the 12-13 Softail/Dyna model lines; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM
•Made in the U.S.A.
NOTE: Not for Softail models with Heritage-style saddlebags.
1861-0709
1861-0793
1800-1473
1800-1517
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
348
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
1800-1554 For 86-13 FXS/FLS/FXST/FLST models $999.951800-1555 For 06-13 Dyna models (except FLD) 999.95
PART # DESCRIPTION SUG. RETAIL
1800-1491 For 09-13 FLHT, FLHR, FLHX, FLTR models $999.95
STAINLESS HI-OUTPUT 2-INTO-1•Engineered for high output engine modifications•Dyno developed and tested to increase volumetric efficiency critical to extracting maximum horsepower from high output engine modifications
•13/4” to 2” tapered headpipes with 21/2” inlet to megaphone and 4” to 41/2” stepped muffler body
•3” to 31/4” baffle with anti-reversion cone•All stainless steel construction with TIG welding and race-inspired brushed stainless “Works” finish
•Contoured laser-cut heat shields•Flat plane 12mm and quick access 18mm oxygen sensor ports for wideband tuning capability
•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
V17523 For 91-05 Dyna models $529.95BAFFLES AND END CAPSV21299 Repl. standard baffle (ea.) 29.95
PART # DESCRIPTION SUG. RETAIL
BAFFLES AND END CAPS (CONT)V21389 Repl. competition baffle (ea.) $40.95V23075 Repl. end cap (ea.) 57.95
PRO-PIPE HS•2-into-1 Pro-Pipe is the system Byron Hines developed when Vance & Hines decided they wanted to make the absolute best-performing pipe on the market for Harley motors
•Meticulous engineering; a hand-made race collector and specifically designed head pipes produce maximum scavenging of spent exhaust gases, then a special baffle system provides just the right sound
•Collector design is blue-proof•Superior fit and chrome finish when compared to other 2-into-1 systems•True full-length 220° wrap heat shields•Removable baffle and all mounting hardware included•Made in the U.S.A.
NOTE: For 03-05 Dyna applications you must use exhaust flanges OEM #65328-83.
PART # DESCRIPTION SUG. RETAIL
1800-12201 For 04-13 XL models $474.951861-0593 Opt. quiet insert (requires baffle mods) (ea.) 21.951 Pre 07 models will require O
2 sensor plug port kit PART #1861-0464 (sold separately).
BLACKOUT 2-INTO-1•Two of the baddest looking models in the Harley Dark Custom line-up are the Sportster Iron and Nightster
•Here is the baddest looking exhaust system to do these Dark Custom darlings justice
•Also compatible with all other Sportster models; system makes the already quick and nimble Sportster a menace to be reckoned with
•Features a durable high temperature matte black ceramic coating with a matching matte black end cap and riveted-on Vance & Hines badge
V17523
V21299Backview of collector
1800-1555
1800-1491
1800-1220
1800-1554
1861-0593
V23075
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
349
POWER SHOTS•Unique dual-staggered, twin-layered slash-cut end tips•Two 21/2” muffler bodies, complete with removable baffles and featuring Vance & Hines signature hot-rod sound; include a single chrome 360° heat shield
•Feature the Power Chamber™ crossover system for increased horsepower and torque
•Require the use of the OEM header pipes and their heat shields
•Made in the U.S.A.
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR 12-13 FLD MODELS1800-1487 Swtichback Duals with Twin Slash Slip-On Mufflers $999.951800-1488 Swtichback Duals with Monster Round Slip-On Mufflers 1,299.95
SWITCHBACK DUALS WITH SLIP-ON MUFFLERS•Designed exclusively for the new Dyna Switchback, Vance & Hines introduces complete exhaust systems that bring the classic look of true duals to the Switchback, paired with either Twin Slash Round or Monster Round slip-on mufflers
•Feature beautifully crafted chrome plated mounting brackets for the mufflers that look great on the Switchback even when riding without the saddlebags
•All Switchback Duals feature full-coverage heat shields over the head pipes•4” Round Twin Slash slip on mufflers are marked by the signature V&H twin slash end treatment and put out a nice aggressive rumble that can be toned down with optional sound inserts PART #1861-0593 (sold separately)
•4” Monster Round slip-on mufflers with CNC-machined billet end caps pulse with the same deep rich tone as Monster Rounds on Touring models•Includes flat plane mounting panel for the 12mm oxygen sensors utilized on the Dyna Switchback, which positions the sensor deeper into the exhaust stream, providing enhanced data feedback to the ECM
WIDOW XR 2-1-2 SYSTEM•There’s no better way to squeeze out the full potential of the XR’s high-output motor than with the Vance & Hines Widow XR
•Employs performance tuned headers with a Power Chamber crossover and twin 31/2” high-flow mufflers•Yields solid power gains and adds a menacing growl that’ll make riders feel like they’re at the grand nationals
•Race-quality black ceramic coat or Limited Edition Stainless Steel version
•Optional quiet baffle lowers sound 2-4 db•Made in the U.S.A.
SOFTAIL DUALS•Give your Softail the nostalgic look of true duals•21/8” 220° full-coverage headpipe heat shields and 21/2” slip-on heat shields make the system virtually blue-proof
•The Slip-ons give the performance and sound you would expect with standard louver core baffles
•Enhance the nostalgic look of a Springer Softail or any other Softail model•Feature matched straight-cut billet tips•New flat plane mounting panel for the 12mm oxygen sensors now featured across the 12-13 Softail/Dyna model lines; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM
•Made in the U.S.A.
NOTE: Pre-07 applications will require O2 sensor port plug kit PART #1861-0464.
350
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
1800-1486 For 12-13 FXS/FLS/FLST models $704.951800-1304 For 97-11 FXS/FXST/FLST models
(except FXCW/FXCWC/FXSTSSE) 699.95
PART # DESCRIPTION SUG. RETAIL
V21869 Quiet baffle (ea.) $29.951802-0012 Opt. Fishtail II end caps (pr.) 169.951802-0011 Opt. slash billet end caps (pr.) 89.95
PART # DESCRIPTION SUG. RETAILFOR 09-12 XR1200 MODELS1800-1129 Black $649.951800-1219 Limited Edition Stainless Steel 1,029.951861-0620 Opt. quiet bafffle (ea,) 32.95
1800-1129
1800-1219
1861-0620
1802-00111802-0012
V21869
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
351
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILCHROME1800-12141 For 10-13 FLHT, FLHR, FLHX, FLTR $709.951800-1131 For 09 FLHT, FLTR, FLHX, FLHR 709.951800-0466 For 07-08 FLHT, FLTR, FLHX, FLHR 709.951800-0155 For 95-06 FLT, FLHT, FLHX, FLTR, FLHR 689.95BLACK1800-1132 For 09 FLHT, FLTR, FLHX, FLHR 847.951800-0747 For 07-08 FLHT, FLTR, FLHX, FLHR 814.95
PART # DESCRIPTION SUG. RETAILCONVERSION MOUNT KIT1861-0573 For 10 FLTRX/FLHX models with factory 2-into-1 exhaust $19.95REPLACEMENT/OPTIONAL END CAPS/BAFFLE1802-0011 Slash billet end caps (pr.) 89.951802-0012 Fishtail II end caps (pr.) 169.95V21869 Optional quiet baffle (ea.) 29.95
1 10 FLTRX/FLHX require conversion mount kit PART #1861-0573.
BIG SHOT DUALS•The ultimate complete system for late-model touring machines•Armed with full-coverage, 220°-wrap, 21/2” heat shields that are essentially blue-proof for long-lasting style•Heat shields surround 13/4” headpipes that flow into 21/8” muffler bodies•True 2-into-2 system eliminates factory crossover and provides a clean, classic dresser look down both sides of the bike•Specially tuned baffles produce the deep Vance & Hines exhaust note with optional quiet baffles also available•Superior fit and an unrivaled finish when compared to other systems•Meticulously finished with straight-cut billet end caps•Optional billet slash-cut end caps or the most unique Fishtail II end caps also available•Removable baffles and all mounting hardware included•Black systems feature full coverage heat shields coated with a race-quality black ceramic contrasted with a signature chrome badge and end tips•Conversion kit includes grommet and mounting rail required to convert 10 FLTRX/FLHX models with factory 2-into-1 exhaust to Big Shot Duals, Dresser Duals or Power Duals
•Made in the U.S.A.
1800-1131
1800-1132
1861-0573
1802-0011
1802-0012
V21869
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
352
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
1800-1492 For 09-13 FLT, FLHT, FLHR, FLHX, FLTR models $1,749.95
STAINLESS HI-OUTPUT DUALS•Engineered for high output engine modifications•Dyno developed and tested to increase volumetric efficiency critical to extracting maximum horsepower from high output engine modifications•Matches tapered headpipes with larger inlet mufflers•13/4” to 2” tapered headpipes with 2” inlet on mufflers and 4” to 41/2” stepped muffler body•3” to 31/4” baffle with anti-reversion cone•All stainless steel construction with TIG welding and race-inspired brushed stainless “Works” finish•Contoured laser-cut heat shields•Flat plane 12mm and quick access 18mm oxygen sensor ports for wideband tuning capability•Made in the U.S.A.
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
353
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILCHROME1802-0260 For 10-13 FLHT, FLHX, FLHR, FLTR models $519.951802-0085 For 09 FLHT, FLHX, FLHR, FLTR models 519.95BLACK1802-0261 For 10-13 FLHT, FLHX, FLHR, FLTR models 599.95
PART # DESCRIPTION SUG. RETAILCONVERSION MOUNT KITS1861-0573 For 10 FLTRX/FLHX models with factory
2-into-1 exhaust $19.951802-0129 For 09-13 H-D FL Trike models 79.95
POWER DUALS•Power Duals is the ticket to style, quality and performance•More than just individual head pipes, Power Duals integrates an exclusive Vance & Hines Power Chamber hidden behind a contoured heat shield that generates more horsepower and torque than stock
•Systems include 220° full-coverage header pipe heat shields•This new right side design eliminates the heat issues on the left side for the passenger, routing hot exhaust gases below the footpeg and protecting vital engine components and side covers from heat damage
•Allows the use of any 09-13 OEM style mufflers•Conversion kit includes grommet and mounting rail required to convert 10 FLTRX/FLHX models with factory 2-into-1 exhaust to Big Shot Duals, Dresser Duals or Power Duals
•Adapter kit extends Power Duals head pipes to allow installation on H-D FL Trike models•Made in the U.S.A.
1802-0129
1802-0260
1802-0260 w/ 1801-0606 mufflers
1802-0261 w/ 1801-0393 mufflers
1861-0573
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
354
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
DRESSER DUALS•Independent 13/4” header pipe system for maximum performance•Include 220° full-length 21/8” heat shields•Allow the use of any 95-13 OEM-style mufflers•Perfect complemeant to the Vance & Hines Slip-on mufflers (sold separately)•Available in chrome or black ceramic finish•Conversion kit includes grommet and mounting rail required to convert 10 FLTRX/FLHX models with factory 2-into-1 exhaust to dual systems
•Adapter kit extends Dresser Dual head pipes to allow installation on H-D FL Trike models•Made in the U.S.A.
1802-0129
1802-0205 w/1801-0312 mufflers
1861-0573
1802-0259Left side
1802-0086Left side
1802-0259 w/1801-0312 mufflers
1802-0204 w/1801-0391 mufflers
1802-0087 w/1801-0312 mufflers
PART # DESCRIPTION SUG. RETAILCHROME1802-0258 For 10-13 FLTR, FLHR, FLHT, FLHX models $439.951802-0086 For 09 FLTR, FLHR, FLHT, FLHX models 439.951802-02041 For 95-08 FLT, FLTR, FLHR, FLHT, FLHX models 439.95BLACK1802-0259 For 10-13 FLTR, FLHR, FLHT, FLHX models 519.951802-0087 For 09 FLTR, FLHR, FLHT, FLHX models 519.951802-02051 For 95-08 FLT, FLTR, FLHR, FLHT, FLHX models 479.95
PART # DESCRIPTION SUG. RETAILCONVERSION MOUNT KIT1861-0573 For 10 FLTRX/FLHX models with factory
2-into-1 exhaust $19.951802-0129 For 09-13 H-D FL Trike models 79.95
1 Non sensor applications will require sensor port plug kit PART #1861-0464.
1802-0086 w/1801-0311 mufflers
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
DELUXE SLIP-ON MUFFLERS•Designed exclusively for the Harley-Davidson Tri Glide Ultra Classic and Street Glide Trikes
•Slip-on mufflers yield significant improvements in both performance and ground clearance over the stock slip-on mufflers
•Finished with a classy oval-shaped, stainless steel rolled-end treatment, mufflers are tuned for a deep and mellow exhaust note that’s perfect for listening to the stereo while cruising the interstate
355
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
PART # DESCRIPTION SUG. RETAILOPTIONAL COMPONENTS1861-0593 Opt. quiet insert (requires baffle mods) for
Rounds 4” PART #1801-0382 (ea.) $21.951861-0700 Opt. quiet insert (requires baffle mods) for Ovals
41/2” PART #1801-0391 (ea.) 39.95
TWIN SLASH SLIP-ON MUFFLERS•This series of slip-on mufflers for touring models incorporates THE best of Vance & Hines and redefines performance, looks and price with a distinctive style and unmistakable sound that is only available here
•Rounds offer a large 4-inch diameter muffler body with an all-mechanical straight through louvered baffle
•Ovals are available in either a 41/2” version with an all-mechanical straight-through louvered baffle for generating power gains with an aggressive exhaust note or 51/2” “Monster” version which has won over touring riders across the country with their power gains and perfect sound
•2-into-1 version was designed specifically to work with the new 2-into-1s on 10 Road Glide and Street Glide; features a large 4-inch, stepped to 41/2”, muffler body that uses an all new maintenance-free baffle that also minimizes heat discoloration and provides the perfect blend of sound and power gains
•All feature the new signature Twin Slash end treatment•Sold in pairs unless noted•Made in the U.S.A.
1801-0390
1801-03911801-0392
1801-04001861-0593
1861-0700
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
356
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
EPA COMPLIANT TWIN SLASH SLIP-ON MUFFLERS•Distinguished by its EPA compliance stamping on the topside of the muffler, the EPA Compliant Twin Slash Slip-on mufflers are 50-state compliant when used on stock 96-cubic-inch displacement 09 and later Harley-Davidson Touring models equipped with stock 2-1-2 dual exhaust headers
•Specially developed for compliance with Federal EPA noise regulations
•Feature full-coverage heat shields for blue-proof protection and sport the signature Vance & Hines Twin Slash, 5.5” wide, oval tips
41/2” HI-OUTPUT SLIP-ON MUFFLERS•Designed specifically to address the needs of tuned motors built for high horsepower applications (high compression, large displacement, big cams)
•Every aspect is singularly focused to yield maximum horsepower by improving the volumetric efficiency of heavily modified engines as well as stock
•Race quality black ceramic or chrome•Compatible with Dresser duals, Power Duals and CVO drop skirt bags
•Sold in pairs•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1801-0422 For 09-11 FLHT, FLHX, FLHR and FLTR (except 10 FLHX/FLTRX) $679.95
1801-0399
1801-0606
1801-0607
1861-0606
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
357
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
1801-0393 For 95-13 FLT, FLHT, FLHX, FLHR, FLTR and H-D FL Trike $449.95
4 “ BLACKOUT ROUND SLIP-ON MUFFLERS•For the rider who commands a menacing presence•Coated with a durable high-temperature black ceramic finish, also include matte black CNC-machined end caps and matching Vance & Hines black riveted badges
•For a completely blacked out look, add the Vance & Hines Dresser Duals in black
•Compatible with CVO drop skirt bags•Sold in pairs•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1801-0396 For 95-13 FLHT, FLHX, FLTR, FLHR and H-D FL Trike models $619.95
PART # DESCRIPTION SUG. RETAIL
1801-0298 For 06-13 VRSCD, VRSCDX and VRSCR models $509.95
31/2” WIDOW SLIP-ON MUFFLERS•Treading deeper into the dark, Vance & Hines introduces Widow slip-on mufflers•Slip-on mufflers carry the signature look of the Vance & Hines Black line; race quality black ceramic coating with machined billet end caps and riveted Vance & Hines badge in chrome
•The striking opposition of black and chrome makes a bold statement, enhancing the appeal of a Street Glide or any custom bagger, especially when matched with new Vance & Hines Dresser Duals Black
•Night Rod version bestows some instant street cred with the same bold black and chrome combination to highlight this dark custom•Sold in pairs•Made in the U.S.A.
1801-0298
1801-0396
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
358
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR 95-13 FLT/FLHT/FLHX/FLHR/FLTR MODELS1801-0311 Chrome w/ chrome tips $779.951801-0310 Chrome w/ black tips 759.951801-0312 Black w/ chrome tips 869.95
MONSTER SLIP-ON MUFFLERS•51/2” Monster Ovals crush the old saying that more power requires more noise•The ovalized mufflers give Monster Ovals twice the internal volume of other slip-on mufflers for better flow and more power
•4” Monster Rounds offer the same perfection in and performances as the Monster Ovals•Stereo-friendly, Monster Mufflers yield a deep rich tone that’s perfect for those cross-country tours•Encased in full-coverage one-piece formed heat shields with machined end caps in chrome or black, riders will be proud to show off their pipes wherever the road takes them
•Sold in pairs•Made in the U.S.A.
MONSTER ROUNDSMONSTER OVALS
1801-0310
1801-0311
1801-0312
1801-0395
Oval end caps
Round end caps
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
359
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
3” FISHTAIL SLIP-ON MUFFLERS•The ultimate in Fishtail design features massive non-blueing 21/2” diameter full-length heat shields with 220° of coverage
•Finishing off each muffler are beautifully sculpted Fishtail II tips•Beneath the meticulously polished chrome are 3” muffler bodies with louvered core baffles
•Sold in pairs•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1801-0394 For 95-13 FLT, FLHT, FLHX, FLHR, FLTR and H-D FL Trike models $499.95
PART # DESCRIPTION SUG. RETAIL
V23068 End cap for straight-cut mufflers PART #V16721 (ea.) $99.95V23069 End cap for slash-cut mufflers PART #V16719 (ea.) 87.951861-0603 Opt. quiet insert (requires baffle mods)
for PART #1801-0394 (ea.) 14.95
PART # DESCRIPTION SUG. RETAIL
V21274 Repl. baffle for PART #s V16723, V16721, V16719 (ea.) $17.95V22897 Repl. end cap O-ring (ea.) 7.95
4” CLASSIC TURN DOWN SLIP-ON MUFFLERS•High-volume, chrome slip-ons provide substantial power increases, improved fuel economy and crisper throttle response
•All Classics provide the perfect sound from your Big Twin; not too loud, definitely not too quiet, and the baffles are removable
•Systems include all necessary hardware and mounting instructions for a hassle-free, perfect fit every time
•Optional quiet insert, requires baffle modifications, available separately
•Sold in pairs•Made in the U.S.A.
END CAPS AND BAFFLE FOR DRESSER MUFFLERS
1801-0394
1861-0603 V22897V23068
1861-0570
1861-0571
1801-0401
PART # DESCRIPTION SUG. RETAIL
1801-0182 For 95-13 FLT, FLHT, FLHX, FLTR, FLHR and H-D FL Trike models $389.95
•They don’t just look good, they are designed to perform•Slip-on design for easy installation•Dyno-tuned baffles and all mounting hardware included•Sold in pairs•Made in the U.S.A.
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
360
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILCHROME1801-0384 For 07-13 FXST/FLST, 10-13 FLSTSE, 08-11 FXCW/C
(except FXSTD/FLSTSB/FLSTF/FLSTN) $324.951801-0552 For 11-13 FXS Blackline 325.951801-0386 For 07-13 FLSTF, 07 FXSTD 324.951801-0388 For 07-13 FLSTN, 08-13 FLSTSB 324.95
PART # DESCRIPTION SUG. RETAIL
CHROME (CONT)1801-0404 For 91-13 Dyna (except 10-13 FXDWG and 08-13
FXDF, 12 FLD) $324.951801-0406 For 08-13 FXDF, 10-13 FXDWG 324.951801-0402 For 04-13 XL models 324.95
3” ROUND TWIN SLASH SLIP-ON MUFFLERS•Feature muffler bodies shielded by full-coverage heat shields for a blue-proof look
•Increased performance with a throaty growl•Include standard louvered core baffles•Sold in pairs•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1861-0570 2.5” competition baffle (ea.) $29.95
PART # DESCRIPTION SUG. RETAIL
1861-0571 1.5” quiet baffle (ea.) $29.95
REPL./OPTIONAL BAFFLES
1861-0570
1861-0571
1801-0384
1801-0402
1801-0404
1801-0552
PART # DESCRIPTION SUG. RETAIL
1801-0576 For 12-13 FLD $249.95
TWIN SLASH 2-INTO-1 SLIP-ON MUFFLER•Designed specifically to work with the new 2-into-1 for the 2012 Dyna Switchback
•Chrome slip-on features a large 4” muffler body with Vance & Hines’ signature twin slash end treatment
•Uses an all new maintenance-free baffle that also minimizes heat discoloration
•Twin Slash 2-into-1 slip-on gives you the perfect blend of performance and sound
•Made in the U.S.A.
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
361
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
3” ROUND TWIN SLASH SLIP-ON MUFFLERS (CONT)
PART # DESCRIPTION SUG. RETAILBLACK1801-0385 For 07-13 FXST/FLST, 10-13 FLSTSE, 08-11 FXCW/C
(except FXSTD/FLSTSB/FLSTF/FLSTN) $399.951801-0553 For 11-13 FXS Blackline 399.951801-0387 For 07-13 FLSTF, 07 FXSTD 399.951801-0389 For 07-13 FLSTN, 08-13 FLSTSB 399.95
PART # DESCRIPTION SUG. RETAIL
BLACK (CONT)1801-0405 For 91-13 Dyna (except 10-13 FXDWG and
08-13 FXDF, 12 FLD) $399.951801-0407 For 08-13 FXDF, 10-13 FXDWG 399.951801-0403 For 04-13 XL models 399.95
PART # DESCRIPTION SUG. RETAIL
1861-0570 2.5” competition baffle (ea.) $29.95
PART # DESCRIPTION SUG. RETAIL
1861-0571 1.5” quiet baffle (ea.) $29.95
REPL./OPTIONAL BAFFLES
1861-0570
1861-0571
1801-0385
1801-0403
1801-0405
1801-0553
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
362
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILBRUSHED STAINLESS STEEL1800-1498 For 00-13 FXS/FXST/FLST models
(except 09 FXSTSSE) $784.951800-1502 For 06-13 Dyna Glide models (except FLD) 773.951800-1500 For 04-13 XL models 749.951800-1494 For all 02-13 VRSC V-Rod models
COMPETITION SERIES 2-INTO-1 EXHAUST•Available in brushed stainless steel or black ceramic powder-coated stainless steel to provide significant weight savings over stock
•Stepped headpipes and full merge collector for maximum performance •Tuned length megaphone•Slip fit collector joints with two dual swivel end retention springs •Racepack EGT fittings in both headpipes•Includes O
2 sensor port plugs for non-sensor applications
•Flat plane 12mm and quick access 18mm oxygen sensor ports for wideband tuning capability•Designed and made in the U.S.A.
NOTE: PART #s 1800-1060, 1800-1061, 1800-1062, 1800-1063 are not designed for use with OEM saddlebags.
1800-1494
1800-1495
1800-1496
1800-1497
1800-1498
1800-1499
1861-0605
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
363
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
COMPETITION SERIES SLIP-ON MUFFLERS•Designed specifically to provide the ultimate sound and performance for stock and big engines•21/2” stainless steel performance cores with billet CNC-machined end caps•Race tuned for maximum power and torque with a deep unique tone•Durable, black ceramic powder-coat finish•For use with stock headers or Vance & Hines True Dual Headers•Sold in pairs•Made in the U.S.A.
FOR 09-13 VRSCF V-ROD MUSCLE (CONT)1861-0605 Quiet baffle (ea.) $23.95
COMPETITION SERIES SLIP-ON MUFFLERS•Quality lightweight construction; weighs only 14 pounds
•Durable “Aluminum Oxide” finish, an exact match to the OEM heat shields
•Tuned length provides increased horsepower
•Baffles included•Fuel maps available•Improved ground clearance•Sold in pairs•Designed and made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
V16535 For 00-06 Buell Blast models $229.95
SS2-R SYSTEM•Replaces the entire stock exhaust system•Aluminum SS2-R muffler is lighter than stock and increases performance
•Made in the U.S.A.
1801-0343
1861-0605
1801-0281
1861-0605
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
364
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
RSD SLANT 2-INTO-1 EXHAUST SYSTEMS•All stainless steel construction with carbon fiber end caps available in two finishes•Works Stainless/Carbon features a brushed stainless finish•Carbon Ops version features features a lightweight Gloss Carbon and Satin Black design that is dipped in the Black Ceramic for the toughest possible finish
•All TIG welded with 18mm O2 sensor bungs; O
2 plugs are not included but are available here in the EXHAUST SECTION if needed
•Two step header pipes; 1.75” to 2.0”•Includes heat shields for rear cylinder and collector inlet, also includes exhaust port gaskets•Fiberglass and stainless steel wool baffle materials for high temperature resistance•Muffler body measures; 17” L x 10” W x 6” D•Includes mounting hardware and instructions•Optional “DB Killer” sound insert provides a more toned down exhaust note•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILFOR 04-13 XL MODELS1800-1560 Stainless steel $895.951800-1561 Carbon Ops 995.951861-0830 Opt. DB Killer sound insert 69.95
1800-1560
1800-1561
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
365
We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
RSD TRACKER 2-INTO-1 EXHAUST SYSTEM™•Roland Sands Design has teamed up with Vance & Hines to introduce a stylized, black ceramic 2-into-1 exhaust system•The RSD Tracker 2-into-1 Exhaust System™ fuses RSD styling and design with Vance & Hines racing performance•Beautifully hand-welded 2-into-1 headpipes boast a race-quality, high-temperature black ceramic coating•Carefully detailed and drilled chrome heat shields are minimalist and sleek•A chrome billet drilled exhaust tip with the RSD mark adds the perfect finishing touch
•Manufactured from beginning to end by Vance & Hines in Southern California
NOTE: Not for use on models with saddlebags.
NOTE: Not for use with passenger footpegs.
PART # DESCRIPTION SUG. RETAIL
1800-1019 For 07-08 FLHT, FLTR, FLHX, FLHR models $598.951800-1268 For 95-06 FLT, FLHT, FLTR, FLHX, FLHR models 599.95
RSD TRACKER DUALS•RSD Tracker Duals begin with high-temp, black ceramic-coated headpipes that are contrasted with show-quality, chrome-plated Tracker-style heat shields for the signature RSD Contrast look
•Headpipes are compatible with any 95-08 V&H or H-D slip-on muffler and are also the perfect match for the RSD Tracker Slip-on mufflers
•Made in the U.S.A.
1800-1019
1800-1268 Right side
1800-1268 Left side
1800-0667
1800-0998
PART # DESCRIPTION SUG. RETAIL
1800-06671 For 07-11 FXS/FXST/FLST models (except 08-11 FLSTB w/ OEM air cleaner, 09 FXSTSSE) $779.95
1800-09981 For 04-13 XL models 779.951 Pre 07 models will require O
2 sensor port plug kit PART #1861-0464
(sold separately).
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
366
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PYTHON® THROWBACKS•13/4” dual-wall headpipes flow into 21/8” muffler bodies to create an aggressive throaty sound
•System arrives completely wrapped and ready to ride with gray exhaust wrap and stainless steel zip ties pre-installed
•Feature 21/2” straight-cut billet end accents that showcase the Python logo
•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1800-14811 For 12-13 FXS/FLS/FLST $804.951800-13111 For 97-11 FXST/FLST (except 09 FXSTSSE) 799.951 Pre 07 models will require O
2 sensor port plug kit PART #1861-0464
(sold separately).
FISHTAIL DUALS•True dual system with 15/8” headpipes wrapped in 21/4” heat shields that flow into extra-long 21/8” mufflers under full coverage 21/2” heatshields
•Show-quality chrome finish•Feature classic fishtail tips for a stylish lowrider-style Softail•Made in the U.S.A.
1800-1314
1800-1313
1800-1312
PART # DESCRIPTION SUG. RETAIL
1800-1479 For 12-13 FXS/FLS/FLST $504.951800-13141 For 86-11 FXST/FLST models (except 09 FXSTSSE) 499.951800-1480 For 12-13 Dyna models (except 12-13 FLD) 504.951800-1313 For 06-11 Dyna models (except 12-13 FLD) 499.951800-13121 For 04-13 XL models 499.95V21869 Opt. quiet baffle (ea.) 29.951 Pre 07 models will require O
2 sensor port plug kit PART #1861-0464
(sold separately).
1800-1311 Left side
1800-1311 Right side
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
367
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
1800-1471 For 12-13 FXS/FLS/FLST models $518.951800-0469 For 86-11 FXS/FXST/FLST models
1800-0241 For 06-11 Dyna models $535.95DS-210449 For 91-05 Dyna models 499.951861-0477 Repl. baffle (ea.) 28.95V21869 Quiet baffle (ea.) 29.95
PART # DESCRIPTION SUG. RETAIL
1861-0355 Repl. front heat shield for PART #1800-0241 $149.951861-0356 Repl. rear heat shield for PART #1800-0241 128.951861-0323 Repl. front heat shield for
PART #1800-0469 and DS-210448 164.951861-0324 Repl. rear heat shield for
PART #1800-0469 and DS-210448 169.95
PART # DESCRIPTION SUG. RETAIL
7808-4001 Repl. front heat shield for PART #DS-210449 $159.957808-4002 Repl. rear heat shield for PART #DS-210449 137.951861-0477 Repl. baffle (ea.) 28.95V21869 Quiet baffle (ea.) 29.95
STAGGERED DUALS EXHAUST SYSTEMS•Developed and tested to increase performance throughout the entire rpm range
•Headpipes are 13/4” and flow into 21/4” muffler bodies•Hidden crossover system improves scavenging for more horsepower and better sound
•Come complete with full-coverage, full-length heat shields for a virtually blue-proof appearance
•With heat shields installed, pipes have a burly 21/2” look•Replacement front and rear heat shields available; sold separately•Feature an embossed Python logo on rear pipe and removable baffles•All required mounting hardware and instructions are included•Made in the U.S.A.
NOTE: Pre 07 FXST/FLST models will require O2 sensor port plug kit
PART #1861-0464 (sold separately).
REPLACEMENT HEAT SHIELDS/BAFFLES
1800-0469
1800-0241
DS-210449
7808-4002
7808-4001
Hidden crossover
Embossed logo
V218691681-0477
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
368
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
2-INTO-1 EXHAUST SYSTEMS•Hefty 21/8” 220° full-coverage headpipe heat shields•One-piece collector heat shield•Beautiful 31/2” muffler with custom scalloped, slash-cut end tip
•Removable baffle and mounting hardware included•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1800-04931 For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) $485.951800-0274 For 06-11 Dyna models 485.951800-04941 For 04-13 XL models 485.951861-0494 Repl. baffle for PART #s 1800-0493/1800-0274/1800-0019 42.95
PART # DESCRIPTION SUG. RETAIL
1861-0665 Repl. baffle for PART #s 1800-0494/1800-0089 $44.951 Pre 07 models will require O
2 sensor port plug kit PART #1861-0464
(sold separately).
1861-0494
1861-0665
1800-0493
1800-0494
1800-0274
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
369
TRUE DUAL HEADERS•Complete a touring model exhaust system with True Duals
•Whether the bike already has a set of Python® mufflers or is still running stock, True Duals will dramatically increase power and cut down the heat the stock crossover system generates on the right side
•21/2” 220° full-coverage heat shields make this a blue-proof system•13/4” headpipes give the sound and performance you want•PART #1802-0257 accepts 09-13 OEM-style mufflers, PART #1800-0742 accepts 95-13 OEM-style mufflers
•Conversion kit is required to mount systems on 10 FLHX/FLTRX with factory 2-into-1 exhaust systems
•Adapter kit will extend True Dual headers for use on FL Trike models•Made in the U.S.A.
NOTE: See new Python website, www.pythonperformance.com, for more details on the complete Python exhaust line.
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
VENOM RADIUS•Distinctive curves that are unforgettable•100% blue-proof with one-piece 21/2” 220° coverage heat shields with slash-cut ends for added style
•Louvered core baffles deliver the big Python® sound; all at an incredible Python® value
•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILCHROME1800-07401 For 86-11 FXS/FXST/FLST models $599.951800-1202 For 06-11 Dyna models 599.95BLACK1800-12341 For 86-11 FXS/FXST/FLST models 674.951 Pre 07 FXST/FLST models will require O
2 sensor port plug kit
PART #1861-0464 (sold separately).
PART # DESCRIPTION SUG. RETAIL
1802-0257 For 10-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models $429.951800-0742 For 07-08 FLHT, FLHR, FLHX and FLTR models 399.951861-0573 Conversion kit for 10 FLHX/FLTRX models models with factory 2-into-1 exhaust 19.951802-0129 Adapter kit for 09-13 H-D FL Trike models 79.95
1800-0742 w/ 1801-0410 mufflers
1802-0257
1800-0742
1802-0129
1800-0740
1800-1234
1800-1202
1802-0257 w/1801-0409 mufflers
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
370
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR MODELS1801-0582 Straight cut, chrome $514.951801-0583 Straight cut, black 528.95
PART # DESCRIPTION SUG. RETAIL
FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR MODELS (CONT)1801-0584 Angle cut, chrome $547.951801-0585 Angle cut, black 557.95
4” SLIP-ON MUFFLERS WITH BILLET TIPS•Large 4” diameter chrome muffler bodies•Innovative baffle technology features 2” baffles that provide free flowing exhaust•Baffles provide quiet idle and mellow cruising tones but more aggressive sound on demand, all with improved performance you can really feel•Custom machined billet exhaust tips are available in chrome or black finishes; both feature Python logo laser engraved for a unique and distinctive look
•Angle Cut billet tips feature 30° angled radius ends that can be rotated on the mufflers bodies for rider’s preference of Slash-Up, or Slash-Down •Made in the U.S.A.
1801-0582
1801-0583
Billet tip w/ engraved logo
1801-0584
1801-0585
Angle cut tip can be rotated
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
371
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE MODELS (EXCEPT 10 FLHX/FLTRX)1801-0377 Oval w/ chrome end tips $594.951801-0376 Round w/ chrome end tips 494.951801-0437 Round w/ black end tips 531.95OPTIONAL BAFFLES1861-0568 2.5” competition baffle for PART #s 1801-0376, 1801-0377 (ea.) 29.951861-0569 1.5” quiet baffle for PART #s 1801-0376, 1801-0377 (ea.) 29.95
PREDATOR 31/2” SLIP-ON MUFFLERS•The latest top-shelf offering in the Python exhaust line•Feature 281/2” overall length chrome bodies•Includes billet end tips with machined channels for a look of understated style
•Aggressive exhaust note attests to the marked gains you’ll feel in torque and horsepower
•Available in oval or round•Matched with Python True Dual Headers, Predator Slip-on Mufflers make the ultimate true dual system
•Sold in pairs•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1801-0375 For 95-13 FLT, FLHT, FLHX, FLTR, FLHR and H-D FL Trike models (except 10 FLHX/FLTRX) (pr.) $364.95
1861-0566 Opt. 2.5” competition baffle for PART #1801-0375 (ea.) 29.951861-0567 Opt. 1.5” quiet baffle for PART #1801-0375 (ea.) 29.95
VIPER 31/2” SLIP-ON MUFFLERS•Striking in both performance and value, Viper Slip-on Mufflers pack loads of torque and horsepower into a gorgeous slash-cut chrome muffler
•Round muffler design produces a deep and menacing growl that will truly do justice for your big-inch twin
•Matched with Python True Dual Headers, Viper Slip-on Mufflers make for a stunning true dual system
•Made in the U.S.A.
CNC billet tip
1801-0377
1801-0437
1801-0375
1801-0376
1861-0568
1861-0567
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
372
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
1801-0522 For 09-13 FLHT, FLHX, FLHR, FLTR and H-D FL Trike models (except 10 FLHX/FLTRX) $499.951801-05251 For 95-08 FLT, FLHT, FLHX, FLHR, FLTR models 499.95V21869 Optional quiet baffle (ea.) 29.951 Requires the use of Python True Duals or Vance and Hines Dresser Duals to ensure proper alignment and fitment.
FISHTAIL 21/2” SLIP-ON MUFFLERS•Feature 21/8” muffler bodies wrapped in 21/2” chrome heatshields which match the OEM headpipe heatshields
•Show-quality finish and style•Come standard with louvered core baffles or optional quiet baffles, sold separately
•Match perfectly with Python True Dual headers or Vance & Hines Dresser Dual Headers for an ultimate system
PART # DESCRIPTION SUG. RETAILOPTIONAL/REPLACEMENT BAFFLES1861-0566 Optional 2.5” competition baffle
for PART #s 1801-0409/1801-0410 (ea.) $29.951861-0567 Optional 1.5” quiet baffle for
PART #s 1801-0409/1801-0410 (ea.) 29.951861-0495 Repl. baffle for PART #s DS-202344/1801-0183 (ea.) 57.95
PYTHON® 31/2” SLASH-CUT SLIP-ON MUFFLERS•High-velocity shielded muffler cores offer protection from heat discoloration while producing outstanding performance gains
•Feature the Python logo on the top of each muffler•Slash-cut ends for a great appearance; baffles are removable
•Include instructions and all mounting hardware•Sold in pairs•Made in the U.S.A.
1801-0410
1861-0495
1801-0409
1801-0522
V21869
1861-0567
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
373
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
1801-0523 For 95-13 FLT, FLHT, FLHX, FLTR, FLHR and H-D FL Trike models (except 10 FLHX/FLTRX) $547.95
BLACK MAMBA 3” SLIP-ON MUFFLERS•21/2” muffler bodies are clad in 3” black ceramic heat shields and are finished with chromed billet tips and laser-cut Python custom name badges with heavy-gauge rivets
•Black Mambas produce a nice deep rumble sound with optional competition and quiet baffles available separately
1801-0381 For 08-13 FXDF, 10-13 FXDWG models 299.951801-0383 For 04-13 XL models 299.95
1861-0570
1861-0571
1861-0570
1861-0571
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
374
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
21/2” SLASH-CUT SLIP-ON MUFFLERS•Get the famous Python look and performance while still using the stock header pipes
•Non-removable high-performance baffles•Brilliant chrome or black ceramic finish; all feature an embossed Python logo on each muffler•Come complete with all necessary mounting brackets and instructions•Sold in pairs•Made in the U.S.A.
NOTE: Black headpipe heat shields are not included with black mufflers.
DS-202343
1801-0254
1801-0255
1801-0256
PART # DESCRIPTION SUG. RETAIL
CHROME1801-0255 For 07-13 FLSTF models $249.951801-0254 For 07-10 FXST/B/C, 07-13 FLSTC, 10-12 FLSTSE and 08-11 FXCW/C models 249.951801-0256 For 12-13 FLS, 05-13 FLSTN, 08-11 FLSTSB models 249.95DS-202343 For 00-06 FXST, FLSTC models 229.95
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
375
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
BLACk1801-0469 For 07-10 FXST/B/C, 07-13 FLSTC, 10-12 FLSTSE and 08-11 FXCW/C models $314.951801-0470 For 91-13 Dyna Glide models (except 08-13 FXDF, 10-13 FXDWG, 12-13 FLD) 314.951801-0471 For 04-13 XL models 314.95
1801-00871801-0257
1801-0469
1801-0470
1801-0471
21/2” SLASH-CUT SLIP-ON MUFFLERS (CONT)
PART # DESCRIPTION SUG. RETAIL
CHROME (CONT)1801-0257 For 91-13 Dyna Glide models (except 08-13 FXDF, 10-13 FXDWG, 12-13 FLD) $249.951801-0087 For 04-13 XL models 249.95
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
376
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
3” SLIP-ON MUFFLERS•Chrome-plated mufflers•Features steel baffles that are wrapped with a special insulating blanket for less “crackle” in the exhaust tone•Available in slash-cut, slash-out or slash-down styles•Sold in pairs•Made in the U.S.A.
1801-0178
1801-0177
1801-0179
1801-0127
1801-0180
1801-0128
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
377
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
FOR 09 FLHT, FLHX, FLHR, FLTR MODELS (CONT)1802-0106 Black $574.95
“DOUBLE BACK™” TRUE DUAL HEADER SYSTEMS•These are right off of Brian Klock’s “WFB” Discovery bike•Feature 13/4” front and rear header pipes with 21/4”, 220°-wrap heat shields•Accept 95-13 stock or aftermarket slip-on FLHT mufflers; check air cleaner clearance before installation•Headers include O
2 sensor ports and are available with chrome or a mean black ceramic finish
•Made in the U.S.A.
NOTE: Headers will fit 10-13 models when used with 0
2 sensor bung adapter kits
PART #s 1861-0608 or 1861-0594 (sold separately)
PART # DESCRIPTION SUG. RETAILFOR 95-13 FLT/FLHT/FLHX/FLHR/FLTR MODELS (EXCEPT 10 FLHX/FLTRX)1801-0327 Chrome w/ chrome end caps $599.951801-0328 Chrome w/ black end caps 605.951801-0326 Black w/ chrome end caps 643.951801-0325 Black w/ black end caps 647.95
PLATINUM SERIES REVOLVER™ SLIP-ON MUFFLERS•These 4” Slip-on Mufflers have a contoured slash-cut end which is adjustable to eight different positions (every 45 degrees)
•Consistent with the Klock Werks exhaust and muffler line, these slip-on mufflers are not just another muffler adapted for use on touring/baggers – they are designed specifically for touring bikes and road use
•The mufflers have a deep throaty rumble when profiling around town or under acceleration, but diminishes to a low hum under steady cruising – great for long trips
•Proprietary baffle setup has been rigorously sound- and performance-tested
•The baffle extends to the front of the muffler body and actually clamps to the head pipe along with the body
•Design allows exhaust gases to enter directly into the baffle and eliminates the hot spot discoloration that generally occurs mid-muffler or where the baffle traditionally starts inside of the muffler body
•Provide long-lasting style without sacrificing performance•Sold in pairs•Made in the U.S.A.
Slash down Slash out
Slash 45˚ down/outSlash up w/extensions
1801-0327
Chrome w/ chrome end cap Chrome w/black end cap
Black w/ chrome end cap Black w/ black end cap
1802-0105
1802-0106
1802-0105 Right side
1802-0105 Left side
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
379
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR 95-13 FLT, FLHT, FLHX, FLHR, FLTR MODELS (EXCEPT 10 FLHX/FLTRX)1801-0349 Straight-cut, standard $369.951801-0411 Straight-cut, short 369.951801-0350 Forward slash, standard 369.95
PART # DESCRIPTION SUG. RETAIL
FOR 95-13 FLT, FLHT, FLHX, FLHR, FLTR MODELS (EXCEPT 10 FLHX/FLTRX) (CONT)1801-0412 Forward slash, short $369.951801-0351 Back slash, standard 369.951801-0413 Back slash, short 369.95
SUPER SAVER 4” SLIP-ON MUFFLERS•Great value and style in big, 4” slip-on mufflers with rolled-edge ends in three different designs and two lengths•Standard versions measure approximately 30” L; short versions are 2” shorter at approximately 28” L•All steel construction with flawless chrome finish•Feature 2” spiral-louvered fiberglass-wrapped baffles that are removable and repackable•Throaty rumble at idle and under acceleration; decreases to a low hum under steady cruising•Sold in pairs•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILSTANDARD END CAPS (EA.)1860-0250 Chrome $68.951860-0252 Black 73.951860-0254 Polished 58.95
PART # DESCRIPTION SUG. RETAILFOR 95-13 FLT/FLHT/FLHX/FLHR/FLTR MODELS (EXCEPT 10 FLHX/FLTRX)1801-0313 Chrome 4” $387.951801-0315 Black 4” 419.95
WFB™ 4” PERFORMANCE SLIP-ON MUFFLERS•Dyno-tested and road-proven, WFB Performance Mufflers are available in both chrome and black versions
•Loaded with the same non-discoloring baffle technology as Revolver™ mufflers, with a similar sound range and a style all their own•Your choice of billet aluminum end caps (must be purchased separately) to customize your mufflers
•Made in the U.S.A.
Chrome w/ polished end cap
Chrome w/ black end cap
Black w/ black end cap
Black w/ polished end cap
Chrome Black Polished
1801-0313 Shown w/ 1860-0250 (sold separately)
1801-0315 Shown w/ 1860-0254 (sold separately)
1801-0349
1801-03501801-0351
1801-0411 1801-04121801-0413
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
380
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR 86-13 FXS/FXST/FLS/FLST (EXCEPT 09 FXSTSSE)1800-1157 FireFlight, black $599.951800-1153 FireFlight, chrome 569.951800-1158 FireSweep, black 599.951800-1154 FireSweep, chrome 569.951800-1156 FireStorm, black 599.951800-1152 FireStorm, chrome 569.95
PART # DESCRIPTION SUG. RETAILFOR 06-13 FXD, FXDWG W/ MID OR FORWARD CONTROLS (EXCEPT FLD)1800-1162 FireFlight, chrome $569.951800-1167 FireSweep, black 599.951800-1163 FireSweep, chrome 569.95FOR 04-13 XL W/ FORWARD CONTROLS1800-1175 FireSweep, black 599.951800-1171 FireSweep, chrome 569.95
FIREPOWER SERIES EXHAUST•Feature 16-gauge steel construction throughout•13/4” headpipes with 21/2” muffler bodies•Includes mounting bracket and hardware•Heat shields and baffles included (not removable on FireSweep style)
•Available with chrome or black finish•Made in the U.S.A.
NOTE: O2 sensor plugs are included for
pre-07 FXST/FLST applications.
1800-1154
1800-1156
1800-1157
1800-1175
1800-1153
1800-1152
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
381
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR 07-13 FXST, FXSTB, FXSTC, FLSTC, 08-12 FXCW, FXCWC1801-0433 Slashcut $299.951801-0434 Slash-down 299.951801-0436 Straight-cut w/ grooved, polished billet end caps 349.951801-0499 Straight-cut w/ grooved, black billet end caps 359.951801-0631 Straight-cut w/ fluted, black billet end caps 359.951801-0632 Slashcut w/ black slashcut end caps 359.95
PART # DESCRIPTION SUG. RETAILFOR 07-13 FLSTN, 08-11 FLSTSB1801-0482 Slashcut $299.951801-0483 Slash-down 299.951801-0480 Straight-cut w/ grooved, polished billet end caps 349.951801-0481 Straight-cut w/ grooved, black billet end caps 359.951801-0633 Straight-cut w/ fluted, black billet end caps 359.951801-0634 Straight-cut w/ black slashcut end caps 359.95
3” FIREPOWER SERIES SLIP-ON MUFFLERS•Slip-on mufflers feature 16-gauge steel construction with polished chrome finish or black finish•Improves power and performance •2” baffles•Sold in pairs•Optional/replacement end caps (sold ea.) available separately•Made in the U.S.A.
1801-0631
1801-0632
1801-0433 1801-0434
1801-0481
1801-0482
1801-0483
1801-0499
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
3” FIREPOWER SERIES SLIP-ON MUFFLERS continued on next page
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
382
1861-0757
PART # DESCRIPTION SUG. RETAILOPTIONAL/REPLACEMENT END CAPS FOR STRAIGHTCUT MUFFLERS1861-0756 Polished billet end cap grooved (ea.) $59.951861-0757 Black billet end cap grooved (ea.) 59.951860-0623 Black billet end cap w/ contrasting flutes (ea.) 69.95
PART # DESCRIPTION SUG. RETAIL
OPTIONAL/REPLACEMENT END CAPS FOR STRAIGHTCUT MUFFLERS (CONT)1860-0624 Black billet end caps w/ contrasting flutes (pr.) $129.951860-0625 Black slashcut end cap (ea.) 69.951860-0626 Black slashcut end caps (pr.) 129.95
1801-0636
1801-0635
1860-0623 1860-0625
1861-0756
1801-0477
1801-0478 1801-0479
3” FIREPOWER SERIES SLIP-ON MUFFLERS (CONT)
PART # DESCRIPTION SUG. RETAILFOR 04-13 XL1801-0478 Slashcut $299.951801-0479 Slash-down 299.951801-0476 Straight-cut w/ grooved, polished billet end caps 349.951801-0477 Straight-cut w/ grooved, black billet end caps 359.951801-0635 Straight-cut w/ black fluted billet end caps 359.951801-0636 Straight-cut w/ black slashcut end caps 359.95
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
383
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PRO-STREET SYSTEMS•Feature 16-gauge steel construction throughout•13/4” headpipes step to 2”, then flow into 21/2” muffler bodies for increased flow and improved performance
•Designed to increase low-end torque and produce a deep, throaty exhaust note
•Includes mounting bracket and hardware•Heat shield sold separately unless noted•Available with chrome or temp black finish•Made in the U.S.A.
NOTE: Baffles for turn-out systems are welded in place; all others are removable.
FOR 86-03 XL W/ FORWARD CONTROLS (CONT)1800-0647 Slash-cut; chrome $489.951861-0394 Opt. chrome heat shields 119.95FOR 86-03 XL W/ MID CONTROLS1800-1011 Straight-cut; chrome 489.951800-0841 Slash-cut; chrome 489.951861-0456 Opt. chrome heat shields 109.95REPLACEMENT END CAP/BAFFLES (EA.)1860-0627 Black billet aluminum end cap for PART # 1800-
1504, 1800-1505 49.951860-0512 Baffle for PART #s 1800-0647, 1800-0840, 1800-0841,
1800-1011 79.951860-0514 Baffle for PART #s 1800-0645, 1800-0821, 1800-1504,
1800-1508, 1800-1509, 1800-1506, 1800-1505, 79.95
1800-1084
1800-1011
1800-0665
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
385
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
RADIAL SWEEPERS•Performance stepped headers with radial rear section•Fabricated from 16-gauge double-wall steel•Direct bolt-on design for easy installation•Available with show-chrome or temp black finish•Made in the U.S.A.
NOTE: Will not fit with passenger footpegs.
PART # DESCRIPTION SUG. RETAILFOR 04-13 XL1800-13101 Black w/ chrome heat shield w/ holes $699.95FOR 07-13 XL1800-0652 Chrome 499.951800-0847 Black 529.95FOR 04-06 XL1800-0676 Chrome 499.951800-1252 Black 529.95FOR 86-03 XL1800-0651 Chrome 499.951800-1253 Black 529.951800-1309 Black w/ chrome heat shield w/ holes 699.95
PART # DESCRIPTION SUG. RETAIL
FOR 86-13 XL1861-0597 Chrome $179.951861-0599 Chrome w/ holes 189.951861-0598 Black 199.951861-0600 Black w/ holes 209.95REPLACEMENT BAFFLES1860-0513 Repl. baffles for all exhaust systems (pr.) 49.95
1 Includes oxygen sensor ports and plugs for non-sensor applications.
1800-0847
1800-0652
1800-1310
1860-05131861-0598
1861-0599
1861-0600
1861-0597
EXHAUST SYSTEMS HEAT SHIELDS (2-PC.)
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
386
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILSLIP-ON MUFFLERS (PR.)1801-0450 4” megaphone w/ billet end cap and standard
21/4” baffles $499.951801-0452 3” slash-cut w/ standard 2” baffles 399.95
PART # DESCRIPTION SUG. RETAIL
SLIP-ON MUFFLERS (PR.) (CONT)1801-0453 3” slant-cut w/ standard 2” baffles $399.951801-0451 3” fishtail w/ standard 2” baffles (non-removable) 419.951861-0759 Repl. baffles for PART #s 1801-0452, 1801-0453 129.95
PART # DESCRIPTION SUG. RETAILTRUE DUAL HEADER PIPES1800-1201 For 99-13 FXST/FLST $549.95
HUTCH SPECIAL TRUE DUAL HEAD PIPES AND SLIP-ON MUFFLERS•16-gauge steel construction with highly polished chrome finish
•Front cylinder pipe routed to left side•Rear cylinder pipe is routed to right side•Full-coverage heat shields included•Require Bassani Softail mufflers (sold separately)
•Headpipes include heatshields and muffler mounting brackets•All hardware mounting brackets included with headpipes•Made in the U.S.A.
NOTE: Header pipes and mufflers listed will not interchange with OEM components.
1800-1201Left side w/ fishtail muffler
1800-1201 Right side w/ fishtail muffler
1801-0452
1801-0451
1801-0453
POWER CURVE TRUE-DUAL CROSSOVER HEADER PIPES FOR SOFTAILS•True-Dual crossover header systems perform as good as they look•Offer improved low-end torque, appearance and an unmistakable exhaust tone
•Fabricated from 16-gauge steel, finished in show-quality chrome and supplied with custom-fit heat shields
•Crossover system will only accept Bassani’s Softail slip-on mufflers (sold separately), featuring 16-gauge steel construction, removable flow-through baffles and show-chrome finish
•All hardware and mounting brackets included with headpipes•Made in the U.S.A.
NOTE: Header pipes and mufflers listed will not interchange with OEM components.
PART # DESCRIPTION SUG. RETAILCROSSOVER HEADER PIPES1800-0639 For 07-13 FXST/FLST $489.951800-0638 For 89-06 FXST/FLST
(except 95 Heritage) 489.95
PART # DESCRIPTION SUG. RETAILSLIP-ON MUFFLERS (PR.)1801-0450 4” megaphone w/billet end cap and standard 21/4” baffles $499.951801-0452 3” slash-cut w/ standard 2” baffles 399.951801-0453 3” slant-cut w/ standard 2” baffles 399.951801-0451 3” fishtail w/ standard 2” baffles (non-removable) 419.951861-0759 Repl. baffles for PART #s 1801-0452, 1801-0453 129.95
1800-0638 Right 1800-0638 Left1801-0450
1801-0451
1801-0452
1801-0453
1801-0450
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
387
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR 95-13 FLHT, FLHR, FLHX, FLTR1800-1358 W/ megaphone muffler, chrome $859.951800-1359 W/ megaphone muffler, black 879.951800-1360 W/ straight muffler, chrome 859.951800-1361 W/ straight muffler, black 879.95
B4 EXHAUST SYSTEMS•Feature 2-into-1 equal-length headers•Stepped 13/4” to 17/8” headpipes•Utilizes an advanced inner collector for maximum performance•Recommended for engines with up to 120 hp•Available with megaphone or straight muffler•Made in the U.S.A.
1800-1358
1800-1359
1800-1360
1800-1361
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
388
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR 86-13 FXS, FXST, FLS, FLST1800-1512 Chrome short megaphone w/ black billet end cap
and contrasting machined flutes $699.951800-1513 Black short megaphone w/ black billet end cap
and contrasting machined flutes 729.95FOR 91-13 FXD, FXDWG W/ MID OR FORWARD CONTROL (EXCEPT FLD)1800-1305 Chrome short megaphone w/ black billet end cap
and contrasting machined flutes 679.95
PART # DESCRIPTION SUG. RETAILFOR 91-13 FXD, FXDWG W/ MID OR FORWARD CONTROL (EXCEPT FLD) (CONT)1800-1306 Black short megaphone w/ black billet end cap
and contrasting machined flutes $699.95FOR 95-13 FLHT, FLHR, FLHX, FLTR1800-1282 Chrome 879.951800-1283 Black 899.95
ROAD RAGE II MEGA POWER SYSTEMS•Designed specifically to address the needs of tuned motors built for high horsepower applications•Features 2-into-1 equal-length 13/4”-17/8” stepped headpipes•Tapered megaphone-style muffler body with 4” polished or black billet end cap with contrasting machined flutes•Include full-coverage heat shields•Oxygen sensor ports and plugs (12mm and 18mm)•Include removable baffle•Optional Pseudo left-side megaphone mufflers available for Bagger models for that twin muffler look; include matching non-functioning (no baffle) muffler with black billet end cap and contrasting flutes
1800-1512
1800-1305
1800-1283
1800-1513
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
389
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR 04-13 XL W/ MID OR FORWARD CONTROLS1800-15561 Chrome, short meg w/ chrome heat shields $699.951800-15571 Black, short meg w/ black heat shields 729.95FOR 07-13 V-ROD MODELS (EXCEPT VRSCF) (STEPPED 13/4” TO 17/8” TO 2”)1800-1317 Chrome, long meg w/ heat shields 699.951800-1318 Black, long meg w/ heat shields 739.95OPTIONAL PSEUDO LEFT-SIDE MEGAPHONE MUFFLERS1801-0548 For 09-13 FLHT, FLHR, FLHX, FLTR
(PART #1800-1282), chrome 349.95
PART # DESCRIPTION SUG. RETAILOPTIONAL PSEUDO LEFT-SIDE MEGAPHONE MUFFLERS (CONT)1801-0544 For 95-08 FLHT, FLHR, FLHX, FLTR
(PART #1800-1282), chrome $349.951801-0549 For 09-13 FLHT, FLHR, FLHX, FLTR
(PART #1800-1283), black 359.951801-0545 For 95-08 FLHT, FLHR, FLHX, FLTR (PART #1800-1283), black 359.95REPLACEMENT BAFFLES1861-0764 For PART #s 1800-1282, 1800-1283 79.951 Use on XL models with 11” or longer shocks only
ROAD RAGE II MEGA POWER SYSTEMS (CONT)
1800-1318
1801-0549
1801-0544
1800-1556
1800-1557
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
ROAD RAGE II B1 POWER SYSTEMS•Designed specifically to address the needs of tuned motors built for high horsepower applications
•Uses a unique extended inner collector maximizing performance•Features 2-into-1 equal-length stepped headpipes; systems for Dyna, Softail and Sportster feature 1-step headers, 13/4” to 17/8”; systems for V-Rod and FL models feature 2-step headers, 13/4” to 17/8” to 2”
•4” straight-style performance muffler body with 21/2” x 161/2” baffle and billet end cap with contrasting machined flutes•Include full-coverage heat shields•Oxygen sensor port plugs also included for non-sensor applications•Optional Pseudo left-side megaphone mufflers available for Bagger models for that twin muffler look, and reducer bushings also included for required applications
•Made in the U.S.A.
390
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR 86-13 FXS, FXST, FLS, FLST1800-1510 Chrome w/ black billet end cap w/ machined contrasting flutes and chrome heat shields $699.951800-1511 Black w/ black billet end caps w/ machined contrasting flutes and black heat shields 729.95FOR 95-13 FLHT, FLHR, FLHX, FLTR1800-1284 Chrome w/ black billet end caps w/ contrasting flutes 879.951800-1285 Black w/ black billet end caps w/ contrasting flutes 899.95FOR 91-13 FXD, FXDWG W/ MID OR FORWARD CONTROL (EXCEPT FLD)1800-13022 Chrome w/ black billet end cap, machined flutes and chrome heat shields 679.951800-13032 Black w/ black billet end cap, machined flutes and black heat shields 699.95
1800-1284
1800-1285
1800-1510
1800-1511
1800-1558
1800-1559
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
391
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR 86-13 XL1800-15582 Chrome w/ black billet end cap w/ machined contrasting flutes and chrome heat shields $699.951800-15592 Black w/ black billet end caps w/ machined contrasting flutes and black heat shields 729.95FOR 09-12 XR 1200/1200X1800-1366 Black w/ black billet end caps w/ machined contrasting flutes 649.95FOR 07-13 VRSCAW, VRSCDX, VRSCX, 09-13 VRSCF1800-13151 Chrome w/ black billet end cap w/ machined contrasting and chrome heat shields 699.951800-13161 Black w/ black billet end cap w/ machined contrasting and black heat shields 739.95FOR 02-05 VRSCA/B1800-1319 Chrome w/ black billet end cap w/ machined contrasting flutes and chrome heat shields 699.951800-1320 Black w/ black billet end cap w/ machined contrasting flutes and black heat shields 739.95OPTIONAL PSEUDO LEFT-SIDE MUFFLER1801-0550 For 09-13 FLHT, FLHR, FLHX, FLTR (PART #1800-1284), chrome 349.951801-0546 For 95-08 FLHT, FLHR, FLHX, FLTR (PART #1800-1284), chrome 349.951801-0551 For 09-13 FLHT, FLHR, FLHX, FLTR (PART #1800-1285), black 359.951801-0547 For 95-08 FLHT, FLHR, FLHX, FLTR (PART #1800-1285), black 359.95REPLACEMENT BAFFLE (EA.)1861-0763 For PART #s 1800-1284, 1800-1285 79.95OPTIONAL HEAT SHIELD1861-0758 For 09-12 XR 1200/1200X (PART #1800-1366), black 199.95
1 Will not fit VRSCF models with passenger pegs.2 Use on XL models with 11” or longer shocks only.
1800-1302
1800-1366
1800-1303
1800-1315
ROAD RAGE II B1 POWER SYSTEMS (CONT)
1801-0550
1800-1320
1801-0547
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
392
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR 08-11 FXCW/C, 09 FXSTSSE W/ FORWARD CONTROLS1800-1089 Chrome, short meg w/ heat shields $649.951800-1090 Black, short meg w/ heat shields 679.95FOR 86-13 FXS/FXST/FLS/FLST (EXCEPT 09 FXSTSSE)1800-11511 Chrome, long meg w/ heat shields 649.951800-12991 Chrome, short meg w/ heat shields 649.951800-11551 Black, long meg w/ heat shields 679.951800-13001 Black, short meg w/ heat shields 679.95FOR 12-13 FLD1800-1418 Chrome w/ heat shields and black billet end cap w/
machined contrasting flutes 699.951800-1419 Black w/ heat shields and black billet end cap w/
machined contrasting flutes 749.95FOR 06-13 FXD/FXDWG W/ FORWARD OR MID CONTROLS1800-1160 Chrome, long w/ heat shields 649.951800-1280 Chrome, short upswept meg w/ heat shields 649.951800-1307 Chrome, short upswept meg w/ heat shields
(not stepped, 13/4” only) 729.951800-1164 Black, long w/ heat shields 679.951800-1281 Black, short upswept meg w/ heat shields 679.95
PART # DESCRIPTION SUG. RETAIL
FOR 06-13 FXD/FXDWG W/ FORWARD OR MID CONTROLS (CONT)1800-1308 Black, short upswept meg w/ heat shields
(not stepped, 13/4” only) $759.95FOR 91-05 FXD/FXDWG W/ FORWARD OR MID CONTROLS1800-1278 Chrome, short upswept meg w/ heat shields 679.951800-1307 Chrome, short upswept meg w/ heat shields
(not stepped, 13/4” only) 729.951800-1279 Black, short upswept meg w/ heat shields 699.951800-1308 Black, short upswept meg w/ heat shields
w/ heat shields 859.951800-12382 Black, long w/ heat shields 949.95FOR 07-09 FLHT, FLHR, FLHX, FLTR1800-0656 Chrome, long meg w/ silver ceramic headpipes 659.951800-0658 Black, long meg 699.95FOR 89-06 FLT, FLHT, FLHR, FLHX, FLTR1800-0655 Chrome, long meg w/ silver ceramic headpipes 659.951800-0657 Black, long meg 699.95
ROAD RAGE 2-INTO-1 SYSTEMS•Stepped headers merge into a true reverse-cone megaphone muffler•13/4” headpipe steps up to 17/8” into the collector to increase flow and improve performance
•4” muffler body with polished billet end cap (except where noted)•Removable spiral-core louvered baffle included•Include mounting hardware•Available in long (24”) and short (12”) muffler lengths with chrome or black finish
•Heat shields included where noted•Made in the U.S.A.
1800-0657
1800-1151
1800-1238
1800-1307
1800-1418
1800-1419
1800-1164
1800-1281
1800-1280
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
393
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR 04-13 XL W/ MID OR FORWARD CONTROLS1800-11683 Chrome, long meg w/ heat shields $649.951800-1272 Chrome, short upswept meg w/ heat shields 649.951800-11723 Black, long meg w/ heat shields 679.951800-1273 Black, short upswept meg w/ heat shields 699.95FOR 86-03 XL W/ MID OR FORWARD CONTROLS1800-12483 Chrome, long meg w/ heat shields 649.951800-1270 Chrome, short upswept meg w/ heat shields 649.951800-12493 Black, long meg w/ heat shields 679.951800-1271 Black, short upswept meg w/ heat shields 679.95FOR 02-05 VRSCA/B W/ FORWARD CONTROLS1800-1251 Chrome, long meg w/ heat shields 699.95
PART # DESCRIPTION SUG. RETAIL
FOR 02-05 VRSCA/B W/ FORWARD CONTROLS (CONT)1800-1274 Chrome, short meg w/ heat shields $679.951800-1254 Black, long meg w/ heat shields 739.951800-1275 Black, short meg w/ heat shields 739.95FOR 07-13 V-ROD MODELS (EXCEPT VRSCF)1800-1149 Chrome, long meg w/ heat shields 679.951800-1276 Chrome, short meg w/ heat shields 679.951800-1277 Black short meg w/ heat shields 739.951800-1298 Black, long meg w/ heat shields
(stepped three times: 13/4” to 17/8” to 2”) 739.95
1800-1168
1800-1172
1800-1249
1800-1251
ROAD RAGE 2-INTO-1 SYSTEMS (CONT)
ROAD RAGE 2-INTO-1 SYSTEMS continued on next page
1800-12771800-1276
1800-11491800-1254
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
394
PART # DESCRIPTION SUG. RETAILOPTIONAL PSEUDO LEFT-SIDE MUFFLER1801-0591 For 95-08 FLHT, FLHR, FLHX, FLTR
(1800-0655, 1800-0656); chrome $349.951801-0593 For 09-13 FLHT, FLHR, FLHX, FLTR
(1800-0656, 1800-1237); chrome 349.951801-0592 For 95-08 FLHT, FLHR, FLHX, FLTR
(1800-0658, 1800-0657); black 349.951801-0594 For 09-13 FLHT, FLHR, FLHX, FLTR
(1800-1238, 1800-0658); black 349.95BAFFLES, HEAT SHIELDS AND END CAPS1860-0543 21/2” i.d. performance baffle for PART #s 1800-0660,
1800-0650, 1800-1013, 1800-1287, 1861-0381 79.951861-0762 21/2” i.d. performance baffle for PART #s 1800-1149, 1800-1298 79.951860-0541 2”1/2” i.d. quiet baffle for PART #s 1800-0655,
1800-0657, 1800-0656, 1800-0658, 1800-1237, 1800-1238 79.951861-0761 21/4” i.d. baffle for PART #s 1800-1151, 1800-1155,
1800-1160, 1800-1164, 1800-1172, 1800-1248, 1800-1248 79.951861-0389 2” i.d. quiet baffle for PART #s 1800-0655, 1800-0656,
1800-0658, 1800-0659, 1800-0660 79.951860-0518 2” i.d. quiet baffle for PART #s 1800-0659, 1800-0660,
1860-0519 2” i.d. standard baffle for PART #s 1800-0663, 1800-0664, 1800-0831, 1800-0832, 1800-0826, 1800-1286 79.95
1861-0387 Opt. chrome heat shields for PART #s 1800-0655, 1800-0656, 1800-0657, 1800-0658 249.95
1861-0512 Opt. black heat shields for PART #s 1800-0655, 1800-0656, 1800-0657, 1800-0658 279.95
1861-0392 Opt. chrome heat shields for PART #s 1800-0660, 1800-0832 179.95
PART # DESCRIPTION SUG. RETAIL
BAFFLES, HEAT SHIELDS AND END CAPS (CONT)1861-0455 Opt. chrome heat shields for PART #1800-0839 $179.951861-0609 Opt. chrome heat shields for PART #s
1800-0831, 1800-0832 179.951861-0610 Opt. black heat shields for PART #s 1800-0831, 1800-0832 199.951861-0624 Opt. black heat shields for PART #s 1800-1092, 1800-1287 199.951860-0494 Opt. polished billet end cap w/ 1” lip for long
mufflers PART #s 1800-0650, 1800-0655, 1800-0656, 1800-0659, 1800-0660, 1800-0825, 1800-1013, 1800-1087 (for chrome or black ceramic) (ea.) 69.95
1860-0495 Opt. black powder-coated end cap w/ 1” lip for long mufflers PART #s 1800-0650, 1800-0655, 1800-0656, 1800-0659, 1800-0660, 1800-0825, 1800-1013, 1800-1087 (for chrome or black ceramic) (ea.) 69.95
1860-0496 Opt. polished billet end cap w/ 1/2” lip for short mufflers PART #s 1800-0663, 1800-0826, 1800-0831, 1800-0832, 1800-1089 (for chrome or black ceramic) (ea.) 69.95
1860-0497 Opt. black powder-coated end cap w/ 1/2” lip for short mufflers PART #s 1800-0663, 1800-0826, 1800-0831, 1800-0832, 1800-1089 (for chrome or black ceramic) (ea.) 69.95
1860-0532 Opt. black powder-coated end cap w/ contrasting machined flutes for PART #s 1800-0655, 1800-0656, 1800-0659, 1800-0660, 1800-1010, 1800-1087, 1800-1151, 1800-1160, 1800-1164, 1800-1168, 1800-1172, 1800-1248, 1800-1249, 1801-0184, 1801-0185, 1802-0119, 1810-2002, 1810-2003, 1861-0381 69.95
1 Includes O2 sensor bung plugs for pre-07 models.
2 Included new-style 12mm and 18mm O2 sensor ports.3 Use on XL models with 11” or longer shocks only
1861-0610
1861-0609
1861-0455
1861-0392
1860-04971860-04961860-04951860-0494
ROAD RAGE 2-INTO-1 SYSTEMS (CONT)
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
1861-0387
1861-0512
1801-0592
1801-0593
1801-0594
1801-0591
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
395
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILWITH MEGAPHONE-STYLE MUFFLER1800-1288 Chrome w/ chrome end caps $999.951800-1301 Chrome w/ black powder-coat end caps 999.951800-1362 Black w/ polished end cap 1,099.951800-1363 Black w/ black end caps
and contrasting flutes 1,099.95
PART # DESCRIPTION SUG. RETAILWITH B1-STYLE MUFFLER1800-1364 Chrome w/ black end caps
and contrasting flutes $994.951800-1365 Black w/ black end caps
+P BAGGER STEPPED TRUE-DUALS SYSTEMS WITH POWER CURVE•Features equal length 13/4” into 17/8” step headpipes with 4” straight muffler style•Include 12mm and 18mm oxygen sensor ports and plugs•Include full coverage headpipe heat shields•Produce a distinctive “stereo-friendly sound”•B1 style muffler utilizes advanced inner collector for maximum performance•Made in the U.S.A.
NOTE: 10 FLHX/FLTRX models will require PART #1861-0573 to properly mount.
FOR 95-13 FLT, FLHT, FLHR, FLHX, FLTR
1800-1288
1800-1301
1800-1362 1800-1363
1800-1364 1800-1365
1860-0542
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
396
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
1802-01252 For 09-13 FLHT, FLHR, FLHX, FLTR; chrome $499.951802-02492 For 09-13 FLHT, FLHR, FLHX, FLTR; black 549.951800-06541 For 07-08 FLHT, FLHR, FLHX, FLTR; chrome 469.951800-06531 For L85-06 FLT, FLHT, FLHR FLHX, FLTR; chrome 469.951 Reuse two existing heat shields.2 Includes 12mm and 18mm sensor ports and plugs.
POWER CURVE TRUE-DUAL CROSSOVER HEADER PIPES•True Dual crossover header pipes perform as good as they look•Features proper port angle and patented matched-length rear headpipe design that produces even performance from each cylinder
•Offers improved low-end torque and appearance•Fabricated from 16-gauge steel, finished in chrome or black and supplied with three custom-fit heat shields
•Can be used with Bassani mufflers or most 09-12 OEM-style aftermarket mufflers (mufflers sold separately)
•Includes 12mm and 18mm sensor ports and plugs•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILFOR 09-13 FLT, FLHT, FLHR, FLTR, FLHX1802-01321 Chrome $489.951802-02481 Black 549.951 Includes 12mm and 18mm sensor ports and plugs.
BAGGER TRUE DUAL HEADPIPES•True dual headpipes with heat shields•Right-side pipe follows same clean lines as frame•Show-chrome or black finish•Can be used with Bassani mufflers or most 95-13 OEM-style aftermarket mufflers•Mounting instructions and hardware included•Made in the U.S.A.
1800-0653 Right
1800-0653 Left
1802-0125 w/ 1801-0184 Megaphone mufflers
1802-0125 Rear head pipe
1802-0249 w/ 1801-0579 mufflers
1802-0132 w/ 1801-0505 mufflers
1802-0248 Leftw/ 1801-0333 mufflers
1802-0248 Rightw/ 1801-0333 mufflers
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
397
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE MODELS1801-0542 Chrome $419.951801-0543 Black 439.95FOR 12-13 FLD1801-05771 Chrome w/ black billet end cap
w/ contrasting flutes 299.95OPTIONAL BILLET END CAPS (PR.)1860-0622 Black billet end cap w/ contrasting flutes 129.951861-0746 Black tapered w/ contrasting flutes 129.951861-0747 Black straight w/ contrasting flutes 129.95
PART # DESCRIPTION SUG. RETAIL
OPTIONAL BILLET END CAPS (PR.) (CONT)1861-0748 Brightly polished slash cut $129.951861-0749 Black slash cut 129.951861-0750 Brightly polished tapered w/ flutes 129.95REPLACEMENT BILLET END CAPS (EA.)1861-0751 Black tapered w/ contrasting flutes 69.951861-0752 Black straight w/ contrasting flutes 69.951861-0753 Brightly polished slash cut 69.951861-0754 Black slash cut 69.951861-0755 Brightly polished tapered w/ flutes 69.95
1 Single muffler.
4” SLIP-ON QUICK CHANGE SERIES MUFFLERS•Mufflers feature 16-gauge steel construction
•Straight can-style muffler bodies to be used with choice of optional billet end caps (sold separately)
•Distinctive aggressive exhaust sound
•Improve power and performance•Slash cut end caps can be rotated for different looks
•Sold in pairs (unless noted)•Made in the U.S.A.
1801-0542w/1861-0747
1801-0543w/1861-0747
1801-0577
1861-0746
1861-07471861-0748
1861-0749
1861-0755
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
398
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
WITH 2” STANDARD BAFFLES
1801-0506 Slant cut, chrome $489.95
1801-0504 Scalloped slash-cut, chrome 499.95
1801-0500 Straight cut, chrome 469.95
1801-0502 Slant down, chrome 489.95
1801-0508 Scallop slant-cut, chrome 499.95
1801-0510 Inverted billet insert, chrome 519.95
WITH 21/4” STANDARD BAFFLES
1801-0184 Megaphone, chrome w/ billet end cap 519.95
1801-0514 Megaphone, chrome w/ black billet end caps and contrasting flutes 549.95
PART # DESCRIPTION SUG. RETAIL
WITH 21/2” PERFORMANCE BAFFLES
1801-0185 Megaphone, chrome w/ billet end cap $519.95
1801-0333 Megaphone, black w/ billet end cap 549.95
1801-0515 Megaphone, chrome w/ black billet end caps and contrasting flutes 549.95
1801-0579 Megaphone, black w/ black billet end caps and contrasting flutes 549.95
1801-0507 Slant cut, chrome 489.95
1801-0505 Scalloped slash-cut, chrome 499.95
1801-0501 Straight cut, chrome 469.95
1801-0503 Slant down, chrome 489.95
1801-0509 Scallop slant-cut, chrome 499.95
1801-0511 Inverted billet insert, chrome 499.95
4” SLIP-ON MUFFLERS•4” diameter slip-on mufflers feature 16-gauge steel construction, removable flow-through baffles and show-chrome or black finish•Bolt to stock locations with supplied hardware•Sold in pairs•Made in the U.S.A.
1801-0184
1801-0500
1801-0502
1801-0506
1801-0508
1801-0510
1801-0514
FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR, FLHX MODELS
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
399
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
4” SLIP-ON MUFFLERS (CONT)
1801-0333
1801-0516
1801-0517
1801-0578
1801-0579
1860-0494
1860-0495
1860-0542
PART # DESCRIPTION SUG. RETAIL
FOR 10 FLHX, FLTRX MODELS
1801-0421 Megaphone, black w/ billet end cap (ea.) $299.95
FOR 12-13 FLD
1801-0578 Megaphone, chrome w/ black billet end caps 299.95
PART # DESCRIPTION SUG. RETAIL
FOR 09-13 VRSCF MODELS
1801-0516 Straight cut, black w/ black billet end caps and contrasting flutes $579.95
1801-0517 Straight cut, chrome w/ black billet end caps and contrasting flutes 550.95
1860-0543
1801-04211801-0505
PART # DESCRIPTION SUG. RETAILREPLACEMENT BAFFLES AND END CAPS1860-0515 Repl. 2” standard baffles for PART #s 1801-0186, 1801-0188, 1801-0265 $129.951860-0603 Repl. 2” standard baffles for PART #s 1801-0500, 1801-0502, 1801-0504, 1801-0506, 1801-0508, 1801-0510 129.951860-0517 Repl. 21/4” standard baffles for PART #s 1801-0184, 1801-0332 129.951861-0765 Repl. 21/2” replacement baffles for PART #s 1801-0501, 1801-0503, 1801-0505, 1801-0507, 1801-0509, 1801-0511 129.951860-0542 Repl. 21/2” performance baffles for PART #s 1801-0185 129.951860-0543 2” I.d. baffle for PART # 1801-0421 (ea.) 79.951860-0541 21/2” I.d. baffle for PART # 1801-0421 (ea.) 79.951860-0494 Repl. polished billet end cap w/ 1” lip for long megaphone mufflers PART #s 1801-0184, 1801-0185, 1801-0332, 1801-0333 (ea.) 69.951802-0222 Repl. polished billet inverted end cap for PART #s 1801-0510, 1801-0511 (ea.) 99.951860-0495 Opt. black powder-coated end cap w/ 1” lip for long megaphone mufflers PART #s 1801-0184, 1801-0185, 1801-0332, 1801-0333 (ea.) 69.95
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
400
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE MODELS1861-0760 2” i.d. baffles for PART #s 1801-0353, 1801-0354,
1801-0355 (pr.) $129.95
31/2” SLIP-ON MUFFLERS•Slip-on mufflers feature 16-gauge steel construction
•13/4” inlet fits stock and most aftermarket headpipes
•Removable baffles•Include mounting hardware and instructions•Sold in pairs•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1801-0305 For 95-13 FLT, FLHT, FLHX, FLHR, FLTR $489.95
CLASSIC FISHTAIL SLIP-ON MUFFLERS•Huge 31/2” inch body with a built-in baffle•Fit stock and most aftermarket head pipes•16-gauge steel construction with a show-chrome finish
•Inlet to the fishtail has been increased to 21/4” and the fishtail outlet is wider to increase exhaust flow and improve power
•Sound is deep and throaty but the classic fishtail is clearly audible
•Sold in pairs•Made in the U.S.A.
1801-0353
1801-0355
1801-0354
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
401
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
1800-12691 For 10-13 FLHT, FLHR, FLTR, FLHX, FLTRX $1,295.951800-11212 For L85-09 FLHT, FLHR, FLTR, FLT, FLHX 1,296.951860-0542 Repl. 21/2” performance baffles (pr.) 129.951 10 FLHX, FLTRX will require PART #1861-0573 to properly mount.2 O
2 sensor port plugs included for non-sensor applications.
COVINGTONS HOT ROD TRUE-DUALS CROSSOVER SYSTEMS•Temp black 13/4” head pipes•Full-coverage chrome heat shields with signature Covingtons-style holes that reveal the black pipes underneath
•Chrome 4” megaphone-style mufflers with Covingtons black inlay billet end caps •Include removable baffles•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILFOR 86-11 FXST/FLST, 91-11 DYNA AND 87-94 FXR1800-1122 Black $899.951800-1123 Chrome 899.95
COVINGTONS HOT ROD 2-INTO-1 SYSTEMS•Inspired by Jerry Covington’s days in the hot rod era
•Megaphone collector with turn-out end and removable baffle
•Full-coverage heat shields with Covington-style holes•O
2 sensor port plugs included for pre-07 models
•Made in the U.S.A.
1800-1122
1800-1123
1860-0542
1800-1121Right side
1800-1121Left side
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
402
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
TRU POWER HIGH-PERFORMANCE TRUE DUAL HEADERS AND MUFFLERS•The ultimate true dual performance exhaust system•Integrated five-step header design is dyno-perfected for maximum horsepower and torque gains
•Mufflers are fully and properly tuned, no other slip-on muffler compares•Mufflers include CNC-machined billet “Stealth” tips in chrome or gloss black ceramic finish; tips will not discolor
•Tips can be rotated 180° to show or hide the laser-engraved LA Choppers logo•Stealth end caps feature gloss black ceramic coat finish•Headpipes only work with listed slip-on mufflers; mufflers will not fit OEM headpipes•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILTRU POWER TRUE DUAL HEADERS1802-0210 For 10-13 FLHT, FLHR, FLTR models $609.951802-0209 For 09 FLHT, FLHX, FLHR, FLTR models 609.951802-0208 For 07-08 FLHT, FLHX, FLHR, FLTR models 609.951802-0207 For 95-06 FLT, FLHT, FLHX, FLHT, FLTR
TRU POWER TRUE DUAL EXHAUST HEADERS•Header pipes are dyno-designed to maximize torque and performance•21/8” diameter heat shields maximize style and the look•Provide balance and symmetry, giving your bike a tight, tough look•Beautiful triple chrome-plated hand-polished finish•For maximum performance gains use with our Tru Power slip-on mufflers (sold separately) or with any 95-13 OEM-style mufflers
•Stainless steel mounting hardware and installation instructions included
•Made in the U.S.A.1802-0090
PART # DESCRIPTION SUG. RETAILFOR 3.5” MUFFLERS (EA.)1860-0549 Gloss black ceramic $74.951860-0550 Chrome 74.95
PART # DESCRIPTION SUG. RETAILFOR 4” MUFFLERS (EA.)1860-0551 Gloss black ceramic $89.951860-0552 Chrome 89.95
OPTIONAL/REPLACEMENT LAC-STYLE END CAPS
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
403
TRU POWER 31/2” SLIP-ON MUFFLERS continued on next page
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
TRU POWER SLIP-ON MUFFLERS•Dyno perfected to optimize torque and performance•Sleek, no-weld design•Race-proven technology; perforated core baffles provide awesome sound and great acceleration•Beautiful hand-polished triple-plated chrome finish or new vibrant black ceramic coat that will take the heat without discoloring
•Chrome mufflers include CNC-machined billet “Stealth” tips in chrome or shiny black ceramic finish•Black ceramic coat mufflers include CNC-machined billet chrome “Stealth” tips or matching black ceramic coat finish tips
•Tips can be rotated 180° to show or hide the laser-engraved LA Choppers logo•Optional/replacement baffles available separately•Mufflers sold in pairs•Made in the U.S.A.
FOR 95-13 FLT/FLHT/FLHX/FLHR/FLTR MODELS
PART # DESCRIPTION SUG. RETAIL3.5” CHROME MUFFLERS1801-0554 W/ gloss black exhaust tips $429.951801-0555 W/ chrome exhaust tips 429.953.5” BLACK CERAMIC COAT MUFFLERS1801-0612 W/ chrome exhaust tips 509.951801-0613 W/ vibrant black ceramic coat exhaust tips 509.954” CHROME MUFFLERS1801-0556 W/ gloss black exhaust tips 449.951801-0557 W/ chrome exhaust tips 449.95
PART # DESCRIPTION SUG. RETAIL4” BLACK CERAMIC COAT MUFFLERS1801-0614 W/ chrome exhaust tips $519.951801-0615 W/ vibrant black ceramic coat exhaust tips 519.95OPTIONAL/REPLACEMENT BAFFLES FOR 3.5” MUFFLERS1860-0555 Standard baffle (ea.) 99.951860-0556 Quiet baffle (ea.) 112.95OPTIONAL/REPLACEMENT BAFFLES FOR 4” MUFFLERS (EA.)1860-0557 Standard baffle 99.951860-0558 Quiet baffle 112.95
1860-0556
1860-0557
1801-0615
1801-0614
1860-0549
1860-0552
PART # DESCRIPTION SUG. RETAILCHROME MUFFLERS W/ CHROME EXHAUST TIPS1801-0558 For 07-13 FLSTF models $399.951801-0560 For 05-13 FLSTN, 08-11 FLSTSB models 399.951801-0562 For 07-10 FXST/B/C, 07-13 FLSTC and
FXDF, 10-12 FXDWG) $399.951801-0572 For 08-13 FXDF, 10-13 FXDWG models 399.951801-0570 For 04-13 XL 399.95
TRU POWER 31/2” SLIP-ON MUFFLERS•Dyno perfected to optimize torque and performance•Work with stock or aftermarket exhaust headers that accept the stock mufflers
•Sleek, no-weld design•Race-proven technology; perforated core baffles provide awesome sound and great acceleration
•Beautiful hand-polished triple-plated chrome finish•Include CNC-machined billet “Stealth” tips in chrome or shiny black ceramic finish; tips will not discolor
•Tips can be rotated 180° to show or hide the laser-engraved LA Choppers logo
•Mounting hardware and instructions included•Optional/replacement baffles sold separately•Mufflers sold in pairs•Made in the U.S.A.
1801-0554 1801-0557
1801-0558
1801-0572
PART # DESCRIPTION SUG. RETAILFOR 3.5” MUFFLERS (EA.)1860-0549 Gloss black ceramic $74.951860-0550 Chrome 74.95
PART # DESCRIPTION SUG. RETAILFOR 4” MUFFLERS (EA.)1860-0551 Gloss black ceramic $89.951860-0552 Chrome 89.95
OPTIONAL/REPLACEMENT LAC STYLE END CAPS
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
404
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
TRU POWER 31/2” SLIP-ON MUFFLERS (CONT)
1860-05491860-0550
1801-0563
1801-0571
1860-0553
1860-0554
PART # DESCRIPTION SUG. RETAILFOR 86-13 SOFTAIL MODELS1800-0719 187 Lazer tip cut exhaust $519.951800-0720 187 Straight-cut tip exhaust 499.95FOR CUSTOM APPLICATIONS1800-01961 187R exhaust w/ slash-cut tips for right-side
drive custom applications 439.951 Do not include heat shields or O
2 sensor mounts.
CUSTOM EXHAUST•Custom chopper pipes•187R exhaust feature a stepped header design (13/4” steps out to 21/4”)•187 Laser and Straight-cut exhaust feature a stepped design (13/4” steps out to 2”) and 2.25” dia. heat shields
•Beautiful hand-polished chrome finish•Adds horsepower and allows cooler running•Mounting kit included; features a billet chrome transmission plate and necessary mounting hardware
•187 Straight-cut exhaust systems can use optional custom exhaust tips for 2.15” I.D exhaust pipes (sold separately)
•Include heat shields, baffles and mounts for O2 sensors unless noted
•Sold in pairs•Made in the U.S.A.
1800-0719 1800-0720
1800-0196
PART # DESCRIPTION SUG. RETAILCHROME MUFFLERS W/ GLOSS BLACK CERAMIC EXHAUST TIPS1801-0559 For 07-13 FLSTF models $399.951801-0561 For 05-13 FLSTN, 08-11 FLSTSB models 399.951801-0563 For 07-10 FXST/B/C, 07-13 FLSTC and
08-11 FXCW/C models 399.951801-0575 For 91-13 Dyna Glide (except FLD,
FXDF, 10-13 FXDWG) 399.951801-0573 For 08-13 FXDF, 10-13 FXDWG models 399.951801-0571 For 04-13 XL 399.95OPTIONAL/REPLACEMENT BAFFLES (EA.)1860-0553 Standard baffle 99.951860-0554 Quiet baffle 112.95OPTIONAL/REPLACEMENT LAC-STYLE END CAPS (EA.)1860-0549 Gloss black ceramic 74.951860-0550 Chrome 74.95
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
405
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
FOR 06-13 FXS/FXST/FLS/FLST, 06-13 FLHT/FLHX/FLHR/FLTR MODELS (CONT)1800-1326 Black $799.95
OPEN LINE 2-INTO-1 SYSTEMS•Unmatched European craftsmanship, outstanding performance, design, and of course the unmistakable deep resonant sound of Akrapovic all come together in these 2-into-1 systems
•Highest quality materials are used throughout, including Austenitic (“surgical grade”) stainless steel along with show-quality chrome plating or Silicone-based black powder coating
•Systems feature Akrapovic’s in-house designed and tested, high-performance insert design for incredible power and famous sound – not old-school baffling
•Systems include three-piece header, muffler body, heat shields, O2 sensor bung adapters and plugs, mounting hardware and complete installation instructions
PART # DESCRIPTION SUG. RETAIL
1861-0744 For 2-into-2 systems $46.95
PART # DESCRIPTION SUG. RETAIL
1861-0745 For 2-into-1 systems $34.95
OPTIONAL NOISE REDUCTION INSERTS•Optional insert enables you to adjust the noise level yourself•Available for 2-into-2 and 2-into-1 Akropovic systems only•Sold each
1800-1325
1800-1326
Performance insert
1861-0744
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
406
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR 06-13 FXD/FXDWG MODELS1800-1327 Chrome $799.95
PART # DESCRIPTION SUG. RETAILFOR 06-13 XL MODELS W/ MID CONTROLS1800-13281 Chrome $749.951800-13291 Black 749.951 Not for use with passenger footpegs.
OPEN LINE 2-INTO-2 SYSTEMS•Unmatched European craftsmanship, outstanding performance, design, and of course the unmistakable deep resonant sound of Akrapovic all come together here in these 2-into-2 systems
•Highest quality materials are used throughout, including Austenitic (“surgical grade”) stainless steel along with show-quality chrome plating or Silicone-based black powder coating
•Systems feature Akrapovic’s in-house designed and tested, high-performance silencer insert design for incredible power and famous sound – not old-school baffling
•Systems include removable silencer inserts, heat shields and complete installation instructions
PART # DESCRIPTION SUG. RETAIL
1861-0744 For 2-into-2 systems $46.95
PART # DESCRIPTION SUG. RETAIL
1861-0745 For 2-into-1 systems $34.95
OPTIONAL NOISE REDUCTION INSERTS•Optional insert enables you to adjust the noise level yourself•Available for 2-into-2 and 2-into-1 Akropovic systems only•Sold each
1861-0744
Silencer insert
1800-1327
1800-1329
1800-1328
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
407
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
SLIP-ON MUFFLERS•Just like the full systems, these are loaded with an exceptional array of Akropovic features•Unmatched European craftsmanship, outstanding performance, design, and of course the unmistakable deep resonant sound of Akrapovic; here with an Optional Sound Valve System that can even be adjusted on-the-fly
•Highest quality materials are used throughout, including Austenitic (“surgical grade”) stainless steel along with show-quality chrome plating and Silicone-based black powder coating as listed
•Optional Sound Valve Systems are available separately•Dresser muffler bodies with end cap measure 20” L (29” overall length with subheader pipe installed) and are 41/2” W x 31/2” T at polygonal exit that tapers to 31/2” round inlet end
•Includes mufflers, subheaders with heat shields, clamps and complete installation instructions•Sold in pairs
1801-05281801-0529
1801-0530
1801-0531
1801-0534
1801-0535
SLIP-ON MUFFLERS continued on next page
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
408
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
SLIP-ON MUFFLERS (CONT)
1801-0532
1801-0533
PART # DESCRIPTION SUG. RETAIL
1861-0733 For mufflers PART #s 1801-0528, 1801-0529 $449.951861-0734 For mufflers PART #1801-0530 449.951861-0735 For mufflers PART #1801-0531 449.951861-0736 For mufflers PART #s 1801-0532, 1801-0533 449.951861-0737 For mufflers PART #1801-0534 449.951861-0738 For mufflers PART #1801-0535 449.95
OPTIONAL SOUND VALVE SYSTEMS FOR SLIP-ON MUFFLERS•The perfect complement to Akropovic’s Slip-On Muffler line allows riders to easily adjust for the sound level they want without ever leaving the bike, or getting their hands dirty
•World Class design and function uses investment cast stainless steel housings and high-temperature graphite bearings throughout
•Valve systems are cable-actuated through a hand control that is mounted on-bike where owner can reach it
•At every setting there is still the unmistakable, deeply resonant sound of Akrapovic•Sold in pairs
PART # DESCRIPTION SUG. RETAIL
1861-0740 For mufflers PART #s 1801-0530, 1801-0531, 1801-0532, 1801-0533 $304.95
CATALYTIC CONVERTERS FOR AKRAPOVIC MUFFLERS•Honeycomb metal structure which incorporates precious metals (palladium, rhodium and platinum) into its surface•Metals convert the poisonous carbon monoxide and unburned hydrocarbons found in exhaust gases into non-toxic carbon dioxide and water vapor
•Sold in pairs
NOTE: Designed specifically for mufflers listed.
1861-0733
Internal view
1861-0733
PART # DESCRIPTION SUG. RETAILFOR 06-13 XL MODELS1801-0532 Chrome $1,049.951801-0533 Black 1,049.95
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
409
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
1800-1515 For 12-13 Softail/Dyna models $1,387.951800-1514 For 07-11 Softail models, 06-11 Dyna models 1,387.95
PHANTOM II EXHAUST SYSTEMS•Brand New Paul Yaffe-inspired design•Curvy 2:1 custom stylized pipe features 2” primary pipes flowing into a 3.5” collector•Black ceramic-coated with four-piece chrome heatshields•Rebuildable/removable baffle gives a great throaty roar•Passenger-friendly design•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1800-1289 For 10-13 FLHT/FLHR/FLHX/FLTR $1,388.95
PART # DESCRIPTION SUG. RETAIL1800-12471 For L85-09 FLT/FLHT/FLHR/FLTR/FLHX $1,388.951 O
2 sensor port plugs included for non-sensor applications.
BAFFLED PHANTOM PIPE EXHAUST SYSTEMS BY PAUL YAFFE•Same wild 2:1 Phantom pipe by cutting-edge designer Paul Yaffe with a neighborhood-friendly baffle
•2” primary pipes with a 3.5” collector body•Four-piece chrome stylized heat shields•Includes Domino billet end cap•Systems are SAE J2825 compliant•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILFOR 07-11 FXST/FLST MODELS (LSD)1800-0533 Silver ceramic $1,120.951800-0534 Black ceramic 1,120.95FOR 86-06 FXST/FLST MODELS (LSD)1800-0075 Silver ceramic 1,120.951800-0167 Black ceramic 1,120.95
PART # DESCRIPTION SUG. RETAILFOR CUSTOM SOFTAIL APPLICATIONS (RSD)1800-02311 Black ceramic $1,120.951800-02321 Silver ceramic 1,120.951 Includes two O
2 sensor ports with plugs.
PHANTOM PIPE EXHAUST SYSTEMS BY PAUL YAFFE•Wild 2:1 pipe by cutting-edge designer Paul Yaffe
•2” primary pipes with a 31/2” collector body•Four-piece chrome stylized heat shields•PYO signature claw tip end cut (unless noted)•Available in left side drive (LSD) or right side drive (RSD)
•Made in the U.S.A.
1800-1515
1800-1289
1800-0231
1800-0232
1800-0533
1800-0167
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
410
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
FOR 91-05 DYNA GLIDE MODELS (CONT)1800-0237 Black ceramic $986.95FOR 04-13 XL1800-0768 Chrome-plated 955.951800-0769 Black ceramic 986.951800-0770 Silver ceramic 1,007.95OPTIONAL COMPONENTS1860-0061 Repl. baffles for all X-Pipes (pr.) 87.951802-0039 Ridged end caps 143.95
THREE-SHIELD X PIPES BY PAUL YAFFE•The latest exhaust offering from world-class pipe builder Paul Yaffe and the SuperTrapp Road Legends series
•Dramatically styled 2” shotgun drag pipes are available in triple-chrome-plated, black ceramic or silver ceramic finish
•Comes complete with baffles, three chrome heat shields, end caps and mounting hardware•Made in the U.S.A.
NOTE: O2 sensor port plugs are included for 86-06 Softail and 04-06 XL applications.
PART # DESCRIPTION SUG. RETAILFOR 07-11 FXS/FXST MODELS1800-1147 Chrome $924.951800-1148 Black ceramic 945.95
PART # DESCRIPTION SUG. RETAILFOR 90-06 FXST MODELS13871451 Chrome $924.951800-0008 Black ceramic 945.95
2” CRACK PIPES BY PAUL YAFFE•Paul Yaffe designed these drag pipes for SuperTrapp’s Road Legends Series
•2” pipes with a straight-through design; no baffles (includes mounting hardware)
•Available in triple chrome-plated or black ceramic finish•Three-piece spot heat shields: two on the rear pipe, one on the front pipe
•Custom designed heat shields have decorative cutouts•Made in the U.S.A.
13871451
1800-0008
1800-0799
1802-0039
1800-0768
1800-0537
1860-0061
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
411
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
BLACK MEAN MOTHERS™ DRAG PIPES•True 21/2” stepped-performance pipes that post impressive performance gains on stock or built engines•A host of features: pre-installed, easy-to-remove baffles, sturdy and simple bracket system with fewer hardware pieces and pre-installed heat shields with OEM fasteners to replace just the heat shield if necessary
•Standard end caps included•Made in the U.S.A.
NOTE: O2 sensor plugs included for non-sensor applications.
PART # DESCRIPTION SUG. RETAILFOR 86-11 FXS/FXST/FLST1800-0962 Shorty $740.951800-0965 Standard 740.95
PART # DESCRIPTION SUG. RETAIL
FOR 86-11 FXS/FXST/FLST (CONT)1800-0961 Long $740.951800-0964 Staggered 740.95
PART # DESCRIPTION SUG. RETAILFOR 04-13 XL1800-0963 Staggered $924.95
MEAN MOTHERS™ DRAG PIPES•SuperTrapp’s Mean Mothers are now meaner and more powerful•True 21/2” stepped-performance pipes that post impressive performance gains on stock or built engines
•A host of features: pre-installed, easy-to-remove baffles, sturdy and simple bracket system with fewer hardware pieces and pre-installed heat shields with OEM fasteners
•OEM fasteners on heat shields can be “broken” to replace just the heat shield if necessary
•Standard end caps included•Choose from optional slash-cut and turnout end caps; both are infinitely adjustable
•Made in the U.S.A.
NOTE: O2 sensor plugs included for 86-06 Softail
and 04-06 XL applications.
PART # DESCRIPTION SUG. RETAILFOR 86-11 FXS/FXST/FLST1800-0538 Shorty $740.951800-0539 Standard 740.951800-0540 Long 812.951800-0541 Staggered 740.95FOR 06-11 DYNA GLIDE1800-1146 Staggered 740.95FOR 91-05 DYNA GLIDE1800-0006 Standard 740.95
PART # DESCRIPTION SUG. RETAIL
FOR 91-05 DYNA GLIDE (CONT)1800-0005 Staggered $740.95FOR 07-08 FLHT/FLHX/FLHR/FLTR1800-0542 Standard 852.95FOR 86-06 FLT/FLHT/FLH/FLHR/FLTR1800-0004 Long 852.95FOR 04-13 XL1800-0765 Staggered 740.95
PART # DESCRIPTION SUG. RETAILREPLACEMENT COMPONENTS1802-0000 Repl. standard
end cap (ea.) $43.951802-0001 Optional turndown/
turnout end cap (ea.) 43.951802-0002 Optional slashdown/
slashout end cap (ea.) 43.95
1800-0961
1800-0962
1800-0963
1800-0965
1802-0000 1802-0001 1802-0002
1800-1146
1800-0538 w/ optional end caps
1800-0004
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
412
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
2-INTO-2 STAGGERED INTERNAL DISC EXHAUST SYSTEM•Features SuperTrapp tunable 3” internal disc mufflers with chrome taper slash end caps
•Durable steel construction with brilliant chrome-plating•Includes 18 3” discs per muffler body, mounting hardware and heat shields
•End cap is interchangeable with any 3” SuperTrapp end cap•Uses OEM heat shields and mounting bracket•Made in the U.S.A.
NOTE: Will fit 95-06 models if mounting bracket DS-209930 or DS-209931 is used.
2-INTO-2 FAT DUALS SYSTEM•Designed like a pair of battleship deck guns that look great and sound even better
•1.75” primary headpipes with 2.5” heat shields•3.5” chrome muffler bodies with removable grooved chrome billet end caps
•Weigh 10% less than stock and include O2 sensor port plugs for pre-07 applications
•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1800-1049 For 86-94 FXST/FLST $822.95
PART # DESCRIPTION SUG. RETAIL
1800-1083 For 86-11 FXS/FXST/FLST $986.95
MEAN MOTHERS™ SIDE SWIPES•Side-swept look accentuates the lines of bike and angle of frame
•13 lb. lighter than stock exhaust system•13/4” stainless steel headpipes•21/4” muffler bodies with removable baffles•One-piece heat shields•Includes standard chrome end caps•Made in the U.S.A.
FOR 08-11 FXCW/C, 09 FXSTSSE (CONT)1800-1081 Black ceramic $719.95
1800-1081
1800-1082
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
413
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
2‑INTO‑1 SUPERMEG SYSTEMS•Increase horsepower while getting a glorious throaty exhaust note out of your exhaust
•Straight‑through core design provides free‑flowing exhaust for crisp throttle response
•Triple chrome plating or black ceramic finish•Integrated three‑piece heat shield that provides full coverage•Includes 20 4” discs, mounting bracket and hardware•Made in the U.S.A.
NOTE: Not recommended for use on FXST/ FLST models with Springer‑style saddlebags.
PART # DESCRIPTION SUG. RETAILFOR 12‑13 FXS/FXST/FLS/FLST MODELS1800‑1372 Chrome $771.951800‑1373 Black ceramic 802.95FOR 86‑11 FXS/FXST/FLST MODELS1800‑0543 Chrome 771.951800‑0544 Black ceramic 822.95FOR 90‑06 FXST/FLST MODELS1800‑0078 Chrome 771.951800‑0551 Black ceramic 822.95FOR 12‑13 DYNA GLIDE MODELS (EXCEPT FLD)1800‑1374 Chrome 771.951800‑1375 Black ceramic 802.95
PART # DESCRIPTION SUG. RETAILFOR 06‑11 DYNA GLIDE MODELS1800‑0547 Chrome $771.951800‑0548 Black ceramic 822.95FOR 91‑05 DYNA GLIDE MODELS1800‑0078 Chrome 771.951800‑0551 Black ceramic 822.95FOR 10‑13 FLHT/FLHR/FLTR MODELS1800‑1255 Chrome 843.951800‑1256 Black ceramic 894.95FOR 09 FLHT/FLHR/FLTR/FLHX MODELS1800‑1052 Chrome 843.951800‑1053 Black ceramic 894.95
PART # DESCRIPTION SUG. RETAILFOR 07‑08 FLHT/FLHR/FLTR/FLHX MODELS1800‑0545 Chrome $843.951800‑0546 Black ceramic 894.95FOR 85‑06 FLHT/FLT/FLHR/FLHX/FLTR MODELS1800‑0076 Chrome 843.951800‑0550 Black ceramic 894.95FOR 04‑13 XL MODELS1800‑0766 Chrome 771.951800‑0767 Black ceramic 822.95BAFFLE REPACKING KIT1860‑0437 Fits all 2‑into‑1
Supermeg systems 28.95
2‑INTO‑1 LOW ROLLER EXHAUST SYSTEM•Chrome‑plated construction•Sleek, rolling‑wave style•Weighs 25% less than stock•Designed to increase exhaust flow and provide a deep Harley rumble•13/4” headpipes flow into 21/2” collector, then onto a 31/2” curved muffler body
•Durable, pillow‑pack pacing offers superior silencing and durability•Includes chrome billet end cap, three‑piece heat shield set and O
2
sensor port plugs for pre‑07 applications•Can be customized with optional end caps (sold separately)•Made in the U.S.A.
PART # DESCRIPTIONSUG.
RETAILEXHAUST SYSTEM1800‑0958 For 86‑11 FXS/FXST models $924.95STEEL END CAPS (ea.)1802‑0014 Slash end cap 99.951802‑0118 Slash end cap, black 76.95108‑8021 Fishtail end cap 99.95108‑7257 Tapered end cap 54.951802‑0117 Tapered end cap, black (ea.) 76.95108‑8022 Turnout/ turndown end cap 99.95
PART # DESCRIPTIONSUG.
RETAIL
STEEL END CAPS (ea.) (CONT)1802‑0116 Rolled, black (ea.) $76.95BILLET END CAPS (ea.)1802‑0015 Fluted end cap 99.951802‑0016 Tapered end cap 99.951802‑0017 Grooved end cap 99.951802‑0018 Java Jug end cap 99.95PAUL YAFFE END CAPS (ea.)1802‑0098 Holy Moly, black billet (ea.) 139.95
PART # DESCRIPTIONSUG.
RETAIL
PAUL YAFFE END CAPS (ea.) (CONT)1802‑0099 Holy Moly, chrome billet (ea.) $139.951802‑0035 Afterburner end
cap, black billet 176.951802‑0036 Afterburner end cap,
chrome billet 176.951802‑0037 Big Poppa end cap,
chrome steel 121.951802‑0038 Claw end cap, chrome steel 121.95
1802‑0014
1802‑0118
1802‑0016
108‑8021
1802‑0015
108‑7257
1802‑0098 1802‑0099
1802‑0116
1802‑0018
1802‑0117
1802‑0017
108‑8022
1802‑0035
1802‑0037
1802‑00361802‑0038
1800‑0958
1800‑1052
1800‑1256
1800‑0078
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
414
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
FATSHOTS EXHAUST•2‑into‑2 system gives you a crisp throttle response and increased performance
•Massive 2” diameter headpipes with high‑volume, disc‑tunable 4” SuperTrapp mufflers
•Expertly finished in show‑quality chrome will definitely set a bike apart from the crowd
•Includes 12 4” discs per muffler body and all required mounting hardware
•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1800‑12231 For 86‑11 FXS/FXST/ FLST shotgun style $1,017.951800‑0249 For custom applications w/ 300/ 330mm wide tire
(right side drive upswept shotgun‑style) 1,110.951 O
2 sensor plugs included for non‑sensor applications.
2‑INTO‑1 SILENT SERIES EXHAUST•Return your bike to near stock sound levels without returning to stock performance
•Available in both tunable Megaphone and non‑tunable straight body designs
•2:1 head pipe designs for maximum performance•2.5” collector provides maximum flow even on big‑bore motors•Three‑piece full‑coverage heat shields prevent blueing•Rebuildable core and packing•Includes 14 4” discs and mounting hardware•Made in the U.S.A.
NOTE: Not recommended for use with Springer‑style saddlebags.
2 sensor plugs included for non‑sensor applications.
2‑INTO‑1 MEGAPHONE SYSTEMS•Patented SuperTrapp tunable disc technology•Adjust sound levels and powerband by adding or removing 4” external discs•Includes 12 4” discs, rebuildable core and packing•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILFOR 91‑98 DYNA GLIDE825‑71358 Satin, high exit $658.95
V‑5 2‑INTO‑1 SLIP‑ON 3/4 EXHAUST SYSTEM•The ultimate pipe for your V‑Rod•SuperTrapp’s external disc technology is incorporated into the company’s first 5” pipe for motorcycles
•Provides a significant horsepower increase and deep throaty exhaust note; mounts to the stock headpipe
•Weighs a whopping 21 lb. less than the stock system and tips the scales at a mere 12 lb.
•Tunable disc system gives the rider the flexibility to set up the pipe for a specific type of riding (includes 12 5” discs)
•By adding discs, exhaust sound and top‑end power increase; by removing discs, low‑end torque increases and exhaust note decreases
•Features triple‑chrome‑plated mid pipe, heat shield and canister, stainless steel core and polished billet aluminum end cap•Uses OEM headpipes•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1801‑0295 For 07‑08 VRSCX/AW/ AWA $976.95
PART # DESCRIPTION SUG. RETAIL
1800‑0272 For 02‑06 VRSCA/B/SE models $976.95
1800‑0578
1800‑0577
1800‑0249
1800‑1223
825‑71358 4MSS‑708834MSS‑70884
1800‑0272
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
415
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
2-INTO-2 TRUE DUAL HEADPIPES•Design adds a unique style•Include 2.25” chrome heat shields•Fit SuperTrapp SE series, Kerker FatShots slip-ons, SuperTrapp/Kerker Stouts or other 95-13 style mufflers
•Hardware included•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILCHROME HEAT SHIELDS1802-0126 For 10-13 FLHT/FLHR/FLHX/FLTR $513.951802-0097 For 09 FLHT/FLHR/FLHX/FLTR 513.951802-00961 For 86-08 FLT/FLHT/FLHR/FLHX/FLTR 462.95
PART # DESCRIPTION SUG. RETAILBLACK HEAT SHIELDS1802-0256 For 10-13 FLHT/FLHR/FLHX/FLTR $513.951802-0255 For 09 FLHT/FLHR/FLHX/FLTR 513.951802-02541 For 86-08 FLT/FLHT/FLHR/FLHX/FLTR 462.951 O
2 bung plugs included for non-sensor applications.
XR-STYLE SYSTEM•Built of 304 series stainless steel (pipes turn a beautiful gold finish after being run)
•13/4” headpipes exit into true reverse-cone megaphone mufflers•21/2” straight-through repackable cores (12 discs per pipe)•O
2 sensor plugs included for non-sensor applications
•Awesome sound and performance•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1800-0771 For 04-13 XL $924.9581570883 For 86-03 XL (except 883C, 1200C) 924.95
2-INTO-2 MEGAPHONE SYSTEM•Increase horsepower while getting a glorious throaty exhaust note•Satin-finished stainless steel•Include mounting bracket, 24 4” discs and hardware•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1800-1111 For 09-12 XR1200/1200X $1,048.95
2-INTO-1 INTERNAL DISC EXHAUST SYSTEM•Features SuperTrapp tunable 3” internal disc muffler with fishtail end cap
•Durable steel construction with brilliant chrome plating•Includes O
2 sensor ports
•System includes 12 4” discs, mounting hardware and heat shields•End cap is interchangeable with any 3” SuperTrapp end cap•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1800-0552 For 07-11 FXS/FXST/FLST $955.95
2-INTO-2 CROSSOVER EXHAUST SYSTEM•Features SuperTrapp tunable 3” internal disc mufflers with fishtail end caps
•Durable steel construction with brilliant chrome plating•System includes 24 3” discs, mounting hardware and heat shields•End caps are interchangeable with any 3” SuperTrapp end cap•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
62878082 For 97-06 FLST/FXST $1,706.95
1802-0096
1802-01261802-0126
1802-0096
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
416
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
MEAN MOTHERS™ SLIP‑ON MUFFLERS•Same throaty drag pipe sound as the original Mean Mothers™
•21/4” stainless steel muffler bodies with black billet end caps
•23/4” chrome replaceable heatshields are pre‑installed•33% weight savings and hp gain over stock mufflers•Sold in pairs•Made in the U.S.A.
PART # DESCRIPTIONSUG.
RETAIL
1801‑0435 For 09‑13 FLHT/ FLHR/ FLHX/ FLTR and H‑D FL Trike models w/ dual exhaust $534.95
STOUT SLIP‑ON MUFFLERS•Massive 4” non‑tunable chrome or black ceramic bodies
•Streamlined, internal tapered, billet aluminum end caps with recessed fasteners are preinstalled
•Newly‑designed inlets flow better into OEM headpipe as well as SuperTrapp True Dual Headpipes
•Provide a heavy, broad spread power curve with horsepower and torque gains over stock mufflers
•Minimally (2 dB) louder than stock•Sold in pairs•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILFOR 10‑13 FLHT/ FLHR/ FLHX/ FLTR (EXCEPT 10 FLHX/ FLTRX)1801‑0518 Chrome $699.951801‑0587 Black 709.95
PART # DESCRIPTION SUG. RETAILFOR 95‑09 FLT/ FLHT/ FLHR/ FLHX/ FLTR1801‑0519 Chrome $699.951801‑0586 Black 709.95
FATSHOTS SLIP‑ON MUFFLERS•4” diameter adds a massive look•Patented SuperTrapp tunable disc technology allows you to adjust sound levels and powerband by adding or removing 4” external discs (24 included)
•Black ceramic or chrome‑plated•Sold in pairs•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILFOR 06‑13 VRSCD/ VRSCR1800‑0572 Black ceramic $616.951800‑0571 Chrome 637.95
SUPER ELITE 31/2” SLIP‑ON MUFFLERS•Race‑proven mechanical baffle for more horsepower and torque at less than 3 dB over a stock exhaust system
•Internal heat shields completely eliminate body blueing•Expertly finished and chrome‑plated•Personalize the look with 12 different styles of end caps•End caps must be purchased separately•Made in the U.S.A.
PART # DESCRIPTIONSUG.
RETAILSLIP‑ON MUFFLERS1801‑0424 For 10 FLHX/ FLTRX (ea.) $277.951801‑0373 For 10‑13 FLHT/ FLHX/ FLHR/ FLTR
(except 10 FLHX) (pr.) 421.951801‑0104 For 95‑09 FLHT/ FLHX/ FLHR/ FLTR (pr.) 421.951801‑0105 For 97‑03 FLSTS, 05‑07 FLSTSC (pr.) 421.95 PART # DESCRIPTION SUG. RETAILBILLET END CAPS (EA.)1802‑0015 Fluted $99.951802‑0016 Tapered 99.951802‑0017 Grooved 99.951802‑0018 Java Jug 99.95STEEL END CAPS (EA.)1802‑0014 Slash 99.951802‑0118 Slash, black 76.95
PART # DESCRIPTION SUG. RETAIL
STEEL END CAPS (EA.) (CONT)108‑8021 Fishtail $99.95108‑8022 Turnout/turndown 99.95108‑7257 Tapered 54.951802‑0117 Tapered, black 76.951802‑0116 Rolled, black 76.95YAFFE END CAPS (EA.)1802‑0098 Holy Moly, black billet 139.95
PART # DESCRIPTION SUG. RETAIL
YAFFE END CAPS (EA.) (CONT)1802‑0099 Holy Moly, chrome billet $139.951802‑0035 Afterburner, black billet 176.951802‑0036 Afterburner, chrome billet 176.951802‑0037 Big Poppa, chrome billet 121.951802‑0038 Claw, chrome billet 121.95
1800‑0572
1801‑0341
1801‑0104
1801‑0424
1802‑00351802‑0036 1802‑0037 1802‑0038
1802‑00981802‑0099
1802‑01161802‑0117
1802‑0118
108‑7257108‑8021 108‑8022
1801‑0105
1802‑0015 1802‑0016
1802‑00141802‑0017 1802‑0018
1801‑0586
1801‑0519
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
417
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
STAINLESS STEEL IDS SLIP-ON•A durable, high-performance slip-on designed specifically for Buell
•Offset saddle bracket mount system developed with data from H-D life cycle testing
•Internal disc design (includes 15 4” discs) means full adjustability and no soot deposits
•Bolts directly to stock Z bracket; beautiful brushed finish•Made in the U.S.A.
UNIVERSAL 4” MEGAPHONE MUFFLER•4” polished stainless steel muffler measures 191/8” long with a 2” inlet
•U.S. Forest Service approved spark arrestor design
•Available in 17” or 19” lengths•Adjust sound levels and powerband by adding or removing 4” or 5” external discs (not included)
•Sold each•Made in the U.S.A.
TAPERED CHROME SLIP-ON MUFFLERS•SuperTrapp’s internal-disc chrome slip-ons let you tune your exhaust for sound and back pressure at a very affordable price
•Use with OEM headpipes to create a staggered dual system with SuperTrapp performance, sound and looks
•Includes 12 3” inch discs per muffler•End caps are interchangeable with any 3” SuperTrapp end cap (except fishtails)
SLIP-ON FISHTAIL MUFFLERS•Mufflers feature tunable 3” internal discs (12 discs in each muffler)•Beautiful triple nickel chrome-plated finish•End caps are interchangeable with any 3” SuperTrapp end cap•Repackable fiberglass baffle•Sold in pairs•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
628-78056 For 97-03 FLSTS, 05-07 FLSTSC $719.95
CHROME MEGAPHONE MUFFLERS•The epitome of style and performance in a tunable system that lets you determine tone and torque
•Available in straight or slash-cut styles•Include 12 4” discs per muffler•Sold in pairs •Made in the U.S.A.
SLIP-ON MUFFLERS•3” chrome slip-on mufflers in tapered, fishtail or turnout styles•End caps are interchangeable with any 3” cap•Each muffler includes 12 internal discs•Made in the U.S.A.
5” REPLACEMENT DISCS•Fit V5 2-into-1 system•Made in the U.S.A.
PART # DESCRIPTIONSUG.
RETAIL
4M3046PS Open end cap (racing only) (ea.) $28.954M3046 Aluminum end cap (ea.) 31.954M3046S Std. end cap (ea.) 24.954AM2120 Exhaust shield (ea.) 25.954AM6506 4” discs (6-pk.) 26.95404‑6512 4” discs (12-pk.) 47.954M7206 Std. repl. screws, holds up to 20 discs (6-pk.) 18.954M7306 Racing screws, holds up to 34 discs (15 minimum) (6-pk.) 40.95400‑8208 Repl. core megaphone, 2-1 127.95
4” ACCESSORIES AND REPLACEMENT PARTS•Made in the U.S.A.PART # DESCRIPTION SUG. RETAIL
328‑93750 Repl. end cap, fishtail (ea.) $155.953MSD‑2535 Repl. end cap, slash cut (ea.) 87.953MSD‑2035 Repl. end cap, tapered (ea.) 76.95308‑3635 Repl. end cap, large turndown/ turnout (ea.) 132.951860‑0249 Repl. baffle for 2-into-1 and Touring mufflers 102.95300‑8173 Repl. core for 13/4” staggered duals 121.95304‑7203 Bolt pack kit (3 long bolts/3 short bolts) 12.95304‑3034 Repl. internal open end cap (3 bolt) 12.953AM6506 Diffuser disc, 6-pk. 26.95304‑6512 Diffuser disc, 12-pk. 47.95
3” ACCESSORIES AND REPLACEMENT PARTS•Made in the U.S.A.
TRAPPCAPS•The perfect way to cap any 4” external disc silencer•6061 billet aluminum, hand polished to a mirror finish•Run open for the ultimate in top-end power and sound; run closed for improved low-end torque and quieter operation
•Sold each•Made in the U.S.A. PART # DESCRIPTION
SUG. RETAIL
1812‑0162 For 3” dia. SuperTrapp external disc mufflers $45.951812‑0150 For 4” dia. SuperTrapp external disc mufflers 52.951812‑0194 Vortex style for 4” dia. SuperTrapp external disc mufflers 52.95
EXHAUST END CAP•Polished end cap for SuperTrapp mufflers•PART #s 1812-0150 and 1812-0162 allow you to open up your exhaust for straight-through flow by simply turning a screw
•Vortex design creates unique spiraling back pressure, altering sound and performance
•Slight power gains when used on modified motors•Made in the U.S.A.•Sold each
5046506
4M3046PS
4M3046 4M3046S
4AM2120
4AM6506
4M7206 4M7306
328‑93750 3MSD‑2535 3MSD‑2035
304‑3034
308‑3635300‑8173
3AM6506
402‑1000402‑1020
1812‑0162
PART # DESCRIPTION SUG. RETAIL
402‑1000 Star billet $155.95402‑1020 Slotted wheel 155.95
1812‑0194
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
419
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
2-INTO-1 CHROME SLASH-CUT SYSTEMSWITH STRAIGHT-THROUGH CORE•Impressive horsepower increase•Unique three-piece heat shield for full coverage•System for Softail-style frames with wide tires requires offset engine placement
•Made in the U.S.A.
NOTE: Modification of mounting brackets may be required.
PART # DESCRIPTION SUG. RETAIL
12871470 230mm system for Softail-style frames w/ wide tires $699.95
SUPERMEG 2-INTO-1 SYSTEMS•Increase horsepower with this popular 2-into-1 system•Deep, rumbling sound that’s sure to please•Design features a straight-through rebuildable core so exhaust can flow freely through system for quick acceleration
•Triple chrome-plated or black ceramic finish•Integrated full-coverage heat shield•Includes mounting bracket and hardware•Made in the U.S.A.
NOTE: Not recommended for Softail models with Springer-style saddlebags.
PART # DESCRIPTION SUG. RETAILFOR 12-13 FXST/FLST1800-1368 Chrome $699.951800-1369 Black ceramic 771.95FOR 07-11 FXST/FLST1800-0554 Chrome 699.951800-0555 Black ceramic 771.95FOR 90-06 FXST/FLST, 91-05 DYNA GLIDE1800-0082 Chrome 699.951800-0562 Black ceramic 771.95FOR 12-13 DYNA GLIDE (EXCEPT FLD)1800-1370 Chrome 699.951800-1371 Black ceramic 797.95FOR 06-11 DYNA GLIDE1800-0558 Chrome 699.951800-0559 Black ceramic 771.95
PART # DESCRIPTION SUG. RETAILFOR 10-13 FLHT/FLHR/FLTR/FLHX1800-1257 Chrome $792.951800-1258 Black ceramic 852.95FOR 09 FLHT/FLHR/FLTR/FLHX1800-1054 Chrome 792.951800-1055 Black ceramic 852.95FOR 07-08 FLHT/FLHR/FLTR/FLHX1800-0556 Chrome 792.951800-0557 Black ceramic 852.95FOR 85-06 FLT/FLHT/FLHX/FLHR/FLTR1800-0080 Chrome 792.95FOR 07-13 XL1800-0763 Chrome 699.951800-0764 Black ceramic 771.95
1800-1054
1800-1258
1800-0554
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
420
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
31/2” SLIP‑ON MUFFLERS•K3 baffle core designed for maximum exhaust flow and an attention‑grabbing exhaust note•Mufflers do not include end caps (except PART #1801‑0015, which includes Java Jugs end caps)•Optional end caps let you change your look without changing pipes•End caps sold separately•Sold in pairs (unless noted)•Made in the U.S.A.
2‑INTO‑1 SPORTSTER SYSTEMS•Lighter‑than‑ stock construction
•Deep signature exhaust tone•High‑flow 2” diameter baffle for increased performance
•Available with brushed aluminum or carbon fiber canisters
•Longer‑lasting “Pillow Pack” packing•Rebuildable core and packing•Polished stainless steel turndown end caps with rolled edge•Made in the U.S.A.
EXHAUST SYSTEMS•Available in 2‑into‑1 or 2‑into‑2 Fishtail crossover design, both with a brightly‑polished chrome finish
•K3 baffle core designed for maximum exhaust flow and an attention‑grabbing exhaust note
•Optional end caps let you change your look without changing pipes; choose from classic Fishtail, Tapered or Turndown that can be mounted in three positions
•System includes full heat shield set and all necessary mounting hardware
•End caps sold separately•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1801‑0423 For 10 FLHX/FLTRX (ea.) $277.951801‑0374 For 10‑13 FLHT/FLHX/FLHR/FLTR and H‑D FL Trike
(except 10 FLHX) 421.9512878020 For 95‑09 FLT/FLHT/FLHX/FLHR/FLTR 421.95
PART # DESCRIPTION SUG. RETAIL
1801‑0015 For 95‑09 FLT/FLHT/FLHX/FLHR/FLTR (include Java Jug end caps) $524.95
12878010 For L85‑94 FLT/FLHT 421.9512878030 For 97‑03, 05‑07 FLSTS/C 421.95
1800‑0553 2‑into‑1 system for 07‑11 FLST/FXST/FXS $781.9512878065 2‑into‑1 system for 90‑06 FLST/FXST 904.9512878083 2‑into‑2 system for 97‑06 FLST/FXST 1,450.9512878082 2‑into‑2 system for 86‑96 FLST/FXST 1,450.95100‑78571 Mikuni P.A.T. performance baffle for
PART #S 12878082 and 12878065 143.951 Not recommended for use with fuel‑injected models.
STOUT SLIP‑ON MUFFLERS•Massive 4” non‑tunable chrome or black ceramic bodies•Streamlined, internal tapered, billet aluminum end caps with recessed fasteners are preinstalled•Newly‑designed inlets flow better into OEM headpipe as well as SuperTrapp True Dual Headpipes•Provide a bold, strong power curve from mid‑range on up with a significant horsepower and torque gain over stock mufflers
•Classic deep and heavy Kerker rumble is 5 dB over stock•Sold in pairs•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILFOR 10‑13 FLHT/FLHR/FLHX/FLTR (EXCEPT 10 FLHX/FLTRX)1801‑0521 Chrome $689.951801‑0589 Black ceramic 709.95
PART # DESCRIPTION SUG. RETAILFOR 95‑09 FLT/FLHT/FLHR/FLHX/FLTR1801‑0520 Chrome $689.951801‑0588 Black ceramic 709.95
1801‑0423 w/ optional end cap 1802‑0035 1801‑0015
12878030
1801‑0589
1801‑0521
1801‑0521
12878065
12878082
1800‑0581
1800‑0582
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
421
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
END CAPS FOR KERKER 31/2” MUFFLERS•Fits complete systems and slip-on mufflers
•Sold each•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILSTEEL END CAPS108-8021 Fishtail end cap $99.95108-8022 Turnout/Turndown end cap 99.95108-7257 Tapered end cap 54.951802-0117 Tapered end cap, black 76.951802-0014 Slash end cap 99.951802-0118 Slash end cap, black 76.951802-0116 Rolled, black 76.95
PART # DESCRIPTION SUG. RETAILBILLET END CAPS1802-0015 Fluted end cap $99.951802-0016 Tapered end cap 99.951802-0017 Grooved end cap 99.951802-0018 Java Jug end cap 99.95YAFFE END CAPS1802-0035 Afterburner, black billet 176.951802-0036 Afterburner, chrome billet 176.951802-0037 Big Poppa, chrome billet 121.951802-0038 Claw, chrome billet 121.95
1802-0035
1802-0036
1802-0037 1802-0038
1802-0116
1802-0117
1802-0014
1802-0118
1802-0015
108-7257
1802-0016
108-8021
1802-0017
108-8022
1802-0018
K SERIES SLIP-ON MUFFLERS•13 lb. lighter than stock•Deep signature exhaust tone•High-flow 2” diameter baffle for optimum performance•Expertly-finished brushed aluminum impact extruded canisters
•Rebuildable core and packing•Sold in pairs•Made in the U.S.A.
MIKUNI P.A.T. CORE SLIP-ON MUFFLERS•Mikuni’s Joe Minton designed these hot slip-on mufflers that provide maximum performance when used with the Mikuni P.A.T. System
•Muffler contains a special straight-through core for the least-restrictive exhaust flow that produces more power and a blood-churning sound
•Core is wrapped with Silent Sport™ packing for superior sound and greater durability than ordinary fiberglass
•Mufflers do not include end caps; end caps are available separately
•Sold in pairs•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1801-0176 For 06-13 VRSCD/VRSCR $513.95
PART # DESCRIPTION SUG. RETAILCORE SLIP-ON MUFFLERS12878045 For 95-13 FLHR, FLTR, FLHT, FLT, FLHX $421.9512878035 For 97-03 FLSTS, 05-07 FLSTSC 452.95BAFFLES100-7857 Mikuni P.A.T. performance baffle 143.95
12878035
12878045 100-7857
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
422
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
2 INTO 2 DUAL HEADER SYSTEMS•Reduces heat transmission to the rider and passenger by routing the exhaust under the frame instead of under the seat
•Lighter system that offers more flow and makes more top-end power than the factory system
•Front pipe crosses over to the left side and is securely mounted to the transmission oil pan
•Crossover pipe is formed from the 17/8 tubing for increased ground clearance and no cross-sectional area loss
•Hidden inter-connect for maximum top-end horsepower, improved low-end torque and sound dampening•Headers systems are available in a high-gloss chrome finish and full-coverage heat shields are finished in black Jet-Hot® high-performance coating with chrome-plated headers
•PART #s 1802-0121 and 1802-0252 include two 18mm O2 sensor ports, plugs and all mounting hardware
•PART #s 1802-0122 and 1802-0253 include two 18mm sensor ports with plugs and two 12mm sensor ports with plugs•Header systems accept any 95-13 OEM-style dresser mufflers (sold separately)•O
2 sensor ports and plugs, gaskets and all mounting hardware included
•Use any Khrome Werks™ or other bagger muffler set•Made in the U.S.A.
4” HP-PLUS® TOURING AND PERFORMANCE SLANT DOWN MUFFLERS•Constructed from one-piece 16-gauge steel tubing muffler shell with interchangeable baffle inserts•Deep, mellow exhaust tone with horsepower and torque gains over stock mufflers•Steel baffle core is first machine wrapped with stainless steel wool, followed by a high-temperature fiberglass blanket for acoustic longevity assurance
•Performance version is designed to enhance top-end power while retaining good low-end torque•Touring version trades minimal top-end output for mile after mile of rumbling exhaust tone•Uses factory mounting hardware and clamps•Available in highly polished duplex nickel chrome or a high-temperature, Jet-Hot® black ceramic coating•Sold in pairs•Made in the U.S.A.
1801-0628 1801-0630
PART # DESCRIPTION SUG. RETAILFOR 95-13 FLHT/FLHR/FLTR/FLHX1801-0628 Chrome (touring) $549.951801-0629 Chrome (performance) 549.951801-0630 Jet-Hot® black (performance) 649.95
PART # DESCRIPTION SUG. RETAILFOR 09-13 FLHT/FLHX/FLTR/FLHR1802-0122 Chrome headers $525.951802-0253 Headers w/ black shields 624.95
PART # DESCRIPTION SUG. RETAILFOR 95-08 FLHT/FLHX/FLTR/FLHR1802-0121 Chrome headers $525.951802-0252 Headers w/ black shields 624.95
1802-0252
1802-0121
1802-0121 w/ 1801-0414 mufflers
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
423
3.50” HP-PLUS® TOURING MUFFLERS•Chrome mufflers increase horsepower and torque with a distinctive deep, throaty, but quieter sound•All new HP-Plus® patented dual-chamber absorptive baffles – large, short front absorptive chamber mutes deceleration popping•Long, rear absorptive chamber features HP-Plus resonator – both chambers are wrapped with a laminated muffler packing consisting of a thin layer of stainless steel under an ultra-high-temperature basalt wool
•Stainless steel packing ensures long life for the high-frequency absorptive basalt wool•Dual-layer packing covers the complete length of the baffle to minimize body discoloration and to absorb the annoying higher frequencies•Low-speed torque is improved over our 3.00” mufflers; overall decibel level is reduced while still retaining high-quality, deep Khrome Werks signature sound
•Fit models equipped with OEM crossover or aftermarket “True Duals” systems•Utilize factory mounting hardware and clamps•Sold in pairs•Made in the U.S.A.•U.S. patent 5,173,576
NOTE: ECM unit may need to be recalibrated if used with free-flowing air cleaners and/or modified engines. Muffler shells may discolor if ECM units are not calibrated correctly.
NOTE: These mufflers are designed for use on closed-course competition motorcycles only and do not conform to U.S. EPA noise emission standards.
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE MODELS1801-0414 Slash down $459.951801-0415 Slash up 459.951801-0416 Tapered 459.95
1801-0414
1801-0415
1801-0416
HP-PLUS® TOURING LITE MUFFLERS•3” and 3.5” diameter Touring Lite line of mufflers has been completely redesigned, retaining the great performance and quality sound•New features include 16-gauge one-piece shells, upgraded baffle design, bolt and nut baffle installation, and upgraded acoustical wrap materials
•One-piece chrome or Jet-Hot® black coated shell eliminates possibility of leaks and transition screws loosening or stripping•Redesigned baffle is machine-wrapped with a laminated muffler packing consisting of a thin layer of stainless steel under high- temperature basalt wool installed with 1/4”-20 bolts and nuts – an improvement over the #10 screws
•Stainless steel packing ensures long life for high-frequency absorptive basalt wool•Dual-layer packing covers the complete length of the baffle, minimizing muffler body discoloration and absorbing the annoying higher frequencies
•Fit models equipped with OEM crossover or aftermarket “True Duals” systems•Utilize factory mounting hardware and clamps•Sold in pairs•Made in the U.S.A.
1801-0438
1801-0419
1801-0418
1801-0598
PART # DESCRIPTION SUG. RETAILCHROME 3” MUFFLERS1801-0417 Slash down $349.951801-0418 Slash down w/ ribs 379.951801-0419 Tapered 349.95
PART # DESCRIPTION SUG. RETAILCHROME 3.5” MUFFLERS1801-0438 Slash up $399.951801-0439 Slash down 399.95
PART # DESCRIPTION SUG. RETAILJET-HOT® BLACK 3.5” MUFFLER1801-0598 Slash down $499.95
FOR 95-13 FLT/FLHT/FLHX/FLTR/FLHR AND H-D FL TRIKE MODELS (EXCEPT 10 FLTRX/FLHX)
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
3” HP-PLUS® SLIP-ON MUFFLERS•Patented steel construction baffle now features more high-temperature fiberglass packing, provides significant gains in horsepower and torque and exhibits a distinctive, throaty sound
•Use all factory mounting hardware•OEM heat shields may be retained•Sold in pairs•Made in the U.S.A.•U.S. patent 5,173,576
NOTE: ECM units on fuel-injected models need to be recalibrated if used with free-flowing air cleaners and/or modified engines. Muffler shells may discolor if ECM units are not calibrated correctly.
NOTE: These mufflers are designed for use on closed-course competition motorcycles only and do not conform to U.S. EPA noise emission standards.
424
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
1801-0146
1801-0147
1801-0153
1801-0524
1801-0621
1801-0145
1801-0624
SOUND REDUCTION KIT•Easy, bolt-in sound reduction for 3” HP-Plus® mufflers•Takes off 4dB at idle and improves low-end torque – minimal loss of top-end horsepower•The machined discs with tapered bosses fit into each end of the patented resonator near the exit end of the mufflers and are retained by the supplied bolts and nuts
•This kit is designed to use with three-ball style resonators that are 6.50” long•Will also fit most other mufflers (four-ball style resonators) if 1/4”-20 x 11.00” threaded rods are substituted for the supplied bolts•Installation requires removal of the mufflers•Kit includes machined discs and two 7.50” 1/4”-20 bolts and two prevailing torque nuts
1 Will fit 91-94 models if mounting bracket DS-209936 is used.
PART # DESCRIPTION SUG. RETAILFOR 07-13 FLSTN, 08-11 FLSTSB1801-0621 Slash down $369.95FOR 08-13 FXDF, 10-13 FXDWG1801-0627 Slash down 369.95
PART # DESCRIPTION SUG. RETAILFOR 06-13 FXD (EXCEPT 10-13 FXDWG, FXDF, FLD)1801-06261 Slash down $359.95FOR 95-05 FXD1801-06241 Slash cut 369.95
PART # DESCRIPTION SUG. RETAILFOR 04-13 XL MODELS (WITH CROSSOVER CONNECTION)1801-0625 Slash down $379.95
1 Will fit 91-94 models if mounting bracket DS-209936 is used.
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
425
CALIBER TRUE DUAL CROSSOVER AND CROSSUNDER EXHAUST SYSTEMS•High-performance True Dual systems with Samson’s Quad Chrome or Sinister black ceramic finish
•Offers performance boosts in horsepower and torque while improving fuel efficiency
•True Dual crossover or crossunder, four-step headers run from 13/4” at the port, steps to 17/8”, then 2” and finish in 4” muffler bodies
•Headers are covered by 21/4” full-coverage chrome heat shields that flow smoothly into the muffler
•Mufflers are finished with a chrome billet end cap and feature removable Varitech baffles; PART #1800-1350 features Decibel Killer baffles that deliver a rich tone without all the “noise”
•Optional high-performance baffles available separately for increased flow; for use with 4” mufflers only•Dual O
2 sensor ports accept OEM and aftermarket closed-loop fuel management systems
•Mounting hardware included•Made in the U.S.A.
NOTE: L85-06 applications may require the separate purchase of O2 sensor port plugs; see page 476.
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
and 35” chrome mufflers 899.951861-0552 Optional high-performance baffle; 21/2” i.d. (ea.) 138.951 Features Decibel Killer baffles.
1800-1349
1800-1350
1800-1351
1800-1354
1800-1355
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
426
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILCHROME1800-1434 For 12-13 FXS, FLS, FLST $599.951800-1338 For 86-11 FXS, FXST, FLST 599.951800-1342 For 10-13 FLHT, FLHX, FLHR 599.951800-1340 For 95-08 FLHT, FLHX, FLTR, FLHR 599.95
PART # DESCRIPTION SUG. RETAIL
CHROME (CONT)1800-1436 For 12-13 FXDB/FXDC/FXDWG/FXDF $599.951800-1518 For 12-13 FLD 599.951800-1344 For 06-11 FXD 599.951800-1346 For 04-13 XL 599.95
CALIBER POWERFLOW III 2-INTO-1 EXHAUST SYSTEMS•The third generation of the horsepower-inducing Powerflow series is the most powerful yet
•Powerflow III 4” 2-into-1 collector with 13/4” head pipes•Power Chamber condenses and intensifies exhaust flow to produce 20% or more horsepower and torque•Full-coverage removable heat shields with Samson’s Quad Chrome or Sinister black ceramic coating•O2 sensor ports accept OEM and aftermarket sensors•Burly 4” muffler features removable baffle and chrome end cap•Made in the U.S.A.
1800-1338
1800-1340
1800-1342
1800-1344
1800-1346
1800-1518
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
427
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILBLACK1800-1435 For 12-13 FXS, FLS, FLST $599.951800-1339 For 86-11 FXS, FXST, FLST 599.951800-1343 For 10-13 FLHT, FLHX, FLHR 599.951800-1341 For 95-08 FLHT, FLHX, FLTR, FLHR 599.95
PART # DESCRIPTION SUG. RETAIL
BLACK (CONT)1800-1437 For 12-13 FXDB/FXDC/FXDWG/FXDF $599.951800-1519 For 12-13 FLD 599.951800-1345 For 06-11 FXD 599.951800-1347 For 04-13 XL 599.95
TRUE DUALS FOR SOFTAIL•”Quad” chrome finish offers a lustrous, long-lasting shine•Offers increased horsepower and torque while improving gas mileage•21/4”, 220° full-coverage heat shields flow smoothly into non-baffled Longtail mufflers
•Completely assembled and ready to install•Made in the U.S.A.
CALIBER POWERFLOW III 2-INTO-1 EXHAUST SYSTEMS (CONT)
1800-1339
1800-1341
1800-1343
1800-13451800-1347
1800-1519
1800-0693 1800-0694
1800-1194
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
428
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILTRUE DUAL CROSSOVER HEADER PIPES ONLY FOR 12-13 FXS/FLS/FLST1802-0220 Chrome $599.951802-0221 Black 599.95TRUE DUAL CROSSOVER HEADER PIPES ONLY FOR 07-11 FXS/FXST/FLST1800-1191 Chrome 599.951802-0203 Black 599.95TRUE DUAL CROSSOVER HEADER PIPES ONLY FOR 95-06 FXST/FLST1800-1192 Chrome 599.9521/4” CHROME MUFFLERS FOR TRUE DUAL CROSSOVER HEADER SYSTEMS ONLY1801-0367 36” Longtail mufflers w/ baffles 399.95
PART # DESCRIPTION SUG. RETAIL
21/4” CHROME MUFFLERS FOR TRUE DUAL CROSSOVER HEADER SYSTEMS ONLY (CONT)1801-0368 36” Mini Cholo Longtail mufflers w/o baffles $399.951801-0369 33” Mini Cholo Longtail mufflers w/ baffles 399.951801-0370 33” Longtail mufflers w/o baffles (4” dia.) 399.951801-0371 28” rolled-edge straight-cut mufflers w/ baffles 399.951801-0600 30” round muffler w/ removable baffles and billet
end caps (4” dia.) 599.95
21/4” BLACK MUFFLERS FOR FXST, FLST TRUE DUAL CROSSOVER SYSTEMS ONLY1801-0599 30” round muffler w/ removable baffles
and billet end caps (4” dia.) 599.95
TRUE DUAL CROSSOVER HEADERS AND MUFFLERS FOR SOFTAILS•13/4” True Dual crossover headers with 21/4” full-coverage heat shields•Finished with Samson’s exclusive Quad Chrome or Sinister black ceramic coating•Clean “seamless” transition between headers and mufflers•Muffler brackets and shift rod included•Headers and mufflers sold separately; mufflers are available with or without integrated baffles•Made in the U.S.A.
NOTE: Header pipes and mufflers listed will not interchange with OEM components.
1800-1191
1801-0367
1801-0370
1801-0371
1801-05991801-0600
1802-0203
1802-0220 Left
1802-0220 Right
1802-0221
PART # DESCRIPTION SUG. RETAILCROSSOVER HEADER PIPES ONLY1800-0529 For 07-11 FXST and FLST models $599.951800-0188 For 95-06 FXST and FLST models 599.95
DUAL EXHAUST CROSSOVER SYSTEMS•”True Dual” header pipes are chrome plated and heli-arc welded for strength•Improved mounting for more ground clearance•Header pipes include 2” full-coverage heat shields, mounting brackets and clamps•Header systems and mufflers sold separately•Made in the U.S.A.
NOTE: On models with saddlebags, always check clearance before running engine.
NOTE: Header pipes and mufflers listed will not interchange with OEM components.
DS-200133
1800-0188 Left w/ fishtail mufflers
DS-200139
1800-0188 Right w/ fishtail mufflers
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
429
TRUE DUALS FOR FXS/FXST/FLS/FLST continued on next page.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
TRUE DUALS FOR FXS/FXST/FLS/FLST•Features a full-diameter rear pipe for optimal flow and performance•Headpipes are covered with 220° heat shield to mask any discoloration; weigh less and sound better than double-wall pipes with the same shielding results
•21/4” muffler bodies with integrated, non-removable, fuel-injection-friendly baffles•Great traditional fishtail looks from the people who know fishtails or the sleek, unique longtails which are 2” longer on the bottom of the tail•Mounting brackets and hardware included•Made in the U.S.A.
NOTE: Muffler bodies are measured from the bottom of the fishtail to the beginning of the muffler body, excluding the inlet.
1800-1193
1800-1356
1800-1357
1800-14481800-1449
1800-1450 1800-1451
1800-1452
1800-1455
Longtail Fishtail
1 Shift rod included.
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
430
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
431
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR 12-13 FXS/FLS/FLST1800-1456 Chrome $899.951800-1454 Black 899.95FOR 95-11 FXS/FXST/FLST1800-10661 Black 899.95
PART # DESCRIPTION SUG. RETAILOPTIONAL BAFFLES1861-0552 21/2” i.d. (ea.) $138.95
TRUE DUAL CROSSOVER EXHAUST SYSTEMS W/ REMOVABLE BAFFLES•High-performance True Dual system delivers better performance and reduces heat from the rear cylinder by using a free-flowing rear headpipe to keep the engine running cooler
•Available with Quad Chrome finish or Sinister black ceramic coating•13/4” headers with 21/4” full-coverage heat shields•Burly 4” mufflers with removable 2” baffles and chrome end caps•Optional high-performance baffles available separately•Includes all mounting hardware•Made in the U.S.A.
TRUE DUAL CROSSUNDER EXHAUST SYSTEMS FOR DRESSERS•True Dual 13/4” crossunder headers with 21/4” full-coverage heat shields
•Designed to produce 20% or more horsepower and torque with a full, rich sound
•Quad Chrome finish delivers optimal adhesion and corrosion protection•Backlash mufflers have removable baffles; Longtails have non-removable baffles•Made in the U.S.A.
1800-1066
1800-1454
1800-1456
1800-1353 Left side
1800-1353 Right side
1800-1352
1800-1348
1861-05521 95-06 models will require O2 sensor port plugs; sold separately.
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
432
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
TRUE DUAL CROSSOVER SYSTEMS WITH REMOVABLE LONGTAIL TIPS FOR DRESSERS•True Dual crossover systems with 13/4” headpipes and 21/4” full-coverage heat shields•Show-quality Quad Chrome finish•21/4” dia. mufflers feature 13/4” x 10” removable baffles and removable Longtail tips•Designed to deliver 20% or more horsepower and torque gains•Systems include O
TRUE DUAL CROSSUNDER SYSTEMS WITH REMOVABLE LONGTAIL TIPS FOR DRESSERS•True Dual crossunder systems with 13/4” headpipes and 21/4” full-coverage heat shields•Show-quality Quad Chrome finish•21/4” dia. mufflers feature 13/4” x 10” removable baffles and removable Longtail tips•Designed to deliver 20% or more horsepower and torque gains•Systems include O
2 sensor ports that accept OEM or aftermarket O
2 sensors
•Made in the U.S.A.
1800-1540
1800-1541
1800-1542
1800-1543
1800-1539
1800-1538
1800-1537
1800-1536
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
433
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
Longtails mufflers w/ baffles 899.951 FLHX and FLTRX models require custom spacing for left passenger footpeg.2 Optional baffle: PART #DS-202154.
TRUE DUAL CROSSOVER SYSTEMS FOR DRESSERS•True Dual 13/4” crossover headers with full-coverage heat shields•Designed to produce up to 20% more horsepower, huge torque and a powerful sound•Show-quality Quad Chrome finish delivers optimal adhesion and corrosion protection•Mufflers are available with or without integrated, non-removable baffles•Made in the U.S.A.
1800-1259
1800-1260
1800-1261
1800-1262
1800-1266
1800-1532
1800-1533
1800-1534
1800-1535
1800-0393
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
434
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
LEGEND SERIES EXHAUST SYSTEMS•Legendary style and function that could only come from Samson•Boost horsepower and torque by up to 20% while also improving fuel efficiency•Stepped headpipes run from 13/4” to 21/4” improving the exhaust flow•Available with either show-quality Quad Chrome finish or Sinister high-temp black ceramic coating; Sinister black retains heat inside the pipe to maximize power while the outer surface remains cooler than chrome pipes
•21/2” full coverage heat shields•Removable baffles ensure tuning requirements of today’s fuel-injected motors while emitting a deep, guttural tone
•O2 sensor ports accept OEM and aftermarket sensors
•Made in the U.S.A.
NOTE: 86-06 FXST, FLST and 04-06 XL applications will require the separate purchase of O
TRUE DUAL CROSSOVER AND CROSSUNDER HEADER PIPES•High-performance “True Dual” header systems with Quad Chrome finish or Sinister black ceramic coating
•Allows exhaust gases to flow more efficiently, reduces heat on the right side and improves airflow cooling the rear cylinder
•09-13 systems feature 21/4” full-coverage, 220° heat shields on both pipes; L85-08 systems feature 2” full-coverage heat shields
•Heli-arc welded for strength•All required mounting brackets and clamps supplied•Headers will accept Silver Bullet™ mufflers or any 95-13 OEM-style muffler•Mufflers must be purchased separately•Made in the U.S.A.
3” SILVER BULLET™ MUFFLERS
TRUE DUAL HEADER PIPES ONLY
1802-0104
1802-0127
1802-0128
1802-0202
DS-202004DS-202013 DS-202160
DS-202162 DS-202163
DS-202164
DS-202208
1800-0187
1800-0530
DS-202248
DS-202179DS-202167
DS-202154
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
437
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR ALL 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKEDS-202301 Oval $499.95DS-202273 Oval slant-cut 499.95DS-202308 Straight-cut 499.95
ROLLED THUNDER™ MUFFLERS•Rolled edge mufflers give a refined, finished appearance to your Dresser
•Power Chamber design with free-flowing, nonremovable baffles
•Overall length is 28”•Made in the U.S.A.; sold in pairs
FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE (CONT)1801-0468 33” x 21/4”Longtail slip-ons (no baffles) $399.95DS-202167 33” x 17/8” Fishtail slip-ons (no baffles) 349.951801-04661 33” x 17/8” Longtail slip-ons (no baffles) 399.951801-04671 36” x 17/8” Longtail slip-ons (no baffles) 399.95DS-2021791 30” x 17/8” Drag pipe slip-ons 299.95DS-202154 11/2” x 10” baffle (ea.) 39.951 Use baffle DS-202154.
3” SILVER BULLET™ MUFFLERS FOR DRESSERS•3” diameter one-piece mufflers feature Power Chamber design with free-flowing, nonremovable baffles with PowerBar technology and high-quality chrome plating
•Bolt to the stock locations with supplied hardware
•Sold in pairs•Made in the U.S.A.
1801-04661801-0467
1801-0468
DS-202160DS-202162
DS-202163
DS-202164 DS-202167
DS-202179
DS-202208 DS-202248
1801-0103
DS-202308DS-202301 DS-202273
DS-202301
DS-202154
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
1801-0537
438
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
13/4” AND 2” “M” PIPES FOR DYNA GLIDE•Chrome-plated single-piece design•All pipes have 21/2” muffler bodies and come with baffles•13/4” pipes accept OEM heat shields; 2” pipes include heat shield•O2 sensor bung plugs included for non-sensor applications•Made in the U.S.A.
NOTE: Mounts to OEM bracket on 95-11 models. 91-94 models must use mounting bracket PART #DS-209936 or 1860-0391.
2” “M” PIPES FOR FLT•Traditional-style chrome staggered pipes feature 21/2” muffler bodies with all-steel muffler cores and heat shields
•Rear pipe is a slip-fit that attaches to the OEM hanger bracket under the saddlebag
•One-piece front pipe includes mounting hardware•Feature a stepped header design for increased performance when used on big-inch motors
•O2 sensor bung plugs included for non-sensor applications•Made in the U.S.A.
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
440
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR 90-06 FLSTF, FXSTD AND 93-96 FLSTN1800-0068 Slash-out, 13/4” $275.95
SHOTGUN-STYLE “M” PIPES FOR FXST/FLST•Highly-chromed finish•All pipes have 21/2” muffler bodies and come with baffles•Accept OEM heat shields unless noted•Made in the U.S.A.
FOR 84-94, 99-00 FXR MODELS (CONT)PHD-223-SS Slash-out, 2” $287.95DS-203083 Heat shields for 84-94, 99-00 13/4” “M” pipes 67.95
13/4” AND 2” “M” PIPES FOR FXR•One-piece design with top-quality chrome finish•All pipes have 21/2” muffler bodies and come with baffles•2” pipes feature a stepped header design for increased performance when used on big-inch motors•Mount to the OEM bracket and must be used with factory clamps or PART #DS-209970•Made in the U.S.A.
13/4” AND 2” “M” PIPES FOR FXST/FLST•Traditional-style, highly-chromed muffler pipes are crafted from one continuous piece of 16-gauge tubing•All pipes have 21/2” muffler bodies and include baffles•2” pipes feature a stepped header design for increased performance when used on big-inch motors•13/4” pipes accept OEM or Cycle Shack heat shields and 2” pipes accept Cycle Shack heat shields only•All necessary gaskets and mounting bracket included•Made in the U.S.A.
FOR 07-11 FXST/B/C, FLSTC MODELS
1800-0593
1800-0594 1800-0595
1800-0597 1800-05981800-0596
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
441
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR 00-06 FXST/C/S/B, FLST/C (INCLUDES MOUNT BRACKET)1800-0059 Slash-out, 13/4” $316.951800-0060 Tapered, 13/4” 316.951800-0062 Slash-out, 2” 353.95
PART # DESCRIPTION SUG. RETAILHEAT SHIELDS FOR 13/4” AND 2” M-PIPESHS-14X Front, for 13/4” pipes (23”) $77.95HS-15X Rear, for 13/4” pipes (231/2”) 79.95
PART # DESCRIPTION SUG. RETAIL
HEAT SHIELDS FOR 13/4” AND 2” M-PIPES (CONT)1861-0049 Front, for 13/4” pipes (14”) $50.951861-0050 Rear, for 13/4” pipes (18”) 52.95
PART # DESCRIPTION SUG. RETAIL
HEAT SHIELDS FOR 13/4” AND 2” M-PIPES (CONT)1861-0052 Front, for 2” pipes (23”) $68.951861-0053 Rear, for 2” pipes (231/2”) 67.95
13/4” AND 2” “M” PIPES FOR FXST/FLST (CONT)
FOR 84-99 FXST; 86-99 FLST EXCEPT FLSTS; 85 FXE AND FXSB; AND 85-86 FXWG (MOUNTS TO OEM BRACKET)
1800-0059
1800-0060
1800-0062
PHD-114-TA PHD-114-SSA
HS-14X
HS-15X
1861-0049
1861-00501861-0052
1861-0053
HEAT SHIELDS FOR CYCLE SHACK SOFTAIL M-PIPES
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
442
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILBRAKE STOP AND HEAT SHIELDS FOR 86-03 MODELSBP-1 Brake stop (86-87 only) $6.95HS-16 Front heat shield for 13/4” pipes 59.95HS-17 Rear heat shield for 13/4” pipes 59.95HS-216 Front heat shield for 2” pipes 66.95HS-217 Rear heat shield for 2” pipes 66.95
13/4” AND 2” “M” PIPES FOR XL•Chrome one-piece design, with 21/2” muffler bodies•2” pipes have a stepped header design for added performance•13/4” pipes for 04-13 models use OEM heat shields•86-03 models will require separate purchase of heat shields•O
2 sensor bung plugs included for 04-06 applications
•Made in the U.S.A.
1800-0603
HS-16HS-17
BP-1
PHD-116-SSA
PHD-116-T0A PHD-216-TA
PHD-116-TA
1800-0604
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
443
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
13/4” AND 2” DRAG PIPES FOR FXCW/FXST/FLST•High-quality chrome finish•2” pipes feature a stepped header design for increased performance when used on big-inch motors
•Come with mounting bracket unless noted•13/4” pipes accept OEM or Cycle Shack heat shields (unless noted); 2” pipes accept Cycle Shack heat shields only
•Optional baffles sold separately•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILSILENCER INSERTS / HEAT SHIELDS1524 Silencer insert, 13/4” (EA.) $16.951526 Silencer insert, 2” (EA.) 16.95HS-14X Front heat shield, 13/4” pipes (23”) 77.95HS-15X Rear heat shield, 13/4” pipes (231/2”) 79.951861-0049 Front heat shield, 13/4” pipes (14”) 50.951861-0050 Rear heat shield, 13/4” pipes (18”) 52.951861-0052 Front heat shield, 2” pipes (23”) 68.951861-0053 Rear heat shield, 2” pipes (231/2”) 67.951 Pipes will fit FLSTF and 93-96 FLSTN models if muffler bracket PART #s
DS-209930, DS-209931 or OEM #65459-84A is purchased.
HS-15X HS-14X
1861-0049
1861-0050
1861-00521861-0053
1800-0600 1800-0602
1800-0063 1800-0065 PHD-101-A
PHD-101SA
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
444
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
13/4” AND 2” DRAG PIPES FOR DYNA GLIDE•Chrome one-piece design•Specifically designed to mount easily onto Dyna Glide models•2” pipes feature a stepped header design for increased performance when used on big-inch motors
•13/4” pipes accept OEM heat shields; 2” pipes include heat shields•Include O
2 sensor bung plugs for non-sensor applications
•Silencer inserts sold separately•Made in the U.S.A.
NOTE: Mounts to OEM bracket on 95-11 models. 91-94 models must use mount bracket 1860-0391 or DS-209936.
13/4” AND 2” SHOTGUN DRAG PIPES FOR FXST/FLST•Chrome shotgun pipes measure 40” long•2” pipes feature a stepped header design for increased flow when used on big-inch motors
•Front pipe mounts to OEM bracket•Heat shields and baffles sold separately•Made in the U.S.A.
NOTE: Will not work with saddlebags.
PART # DESCRIPTION SUG. RETAIL
PHD-101-GA Slash-out, 13/4” $190.95PHD-201-GA Slash-out, 2” 220.95HS-14X Front heat shield, 13/4” (23”) 77.951861-0049 Front heat shield, 13/4” (14”) 50.95
PART # DESCRIPTION SUG. RETAILFOR 91-11 DYNA GLIDE (EXCEPT 10-11 FXDWG, 08-11 FXDF)1800-0247 Slash-out, 13/4” $220.951800-1124 Slash-out, 2” 385.951800-1128 Straight-cut, 13/4” 220.951524 Silencer insert for PART #PHD-149C, 13/4” (ea.) 16.951526 Silencer insert for PART #PHD-249, 2” (ea.) 16.95
13/4” SHOTGUN DRAG PIPES FOR FXST/FLST•One-piece design with a chrome finish•Accept OEM heat shields•Optional baffles sold separately•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILFOR 90-06 FLSTF, 93-96 FLSTN AND 00-06 FXSTD1800-0066 Slash-out, 13/4” $211.951524 Silencer insert, 13/4” (ea.) 16.95
1800-0247
1800-1124
1800-1128
FOR 84-99 FXST; 86-99 FLST (EXCEPT FLSTF, FLSTN AND FLSTS)
1861-00491861-0047
1800-0066
PHD-101-GA PHD-201-GA
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
445
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
13/4” AND 2” DRAG PIPES FOR FLT•Straight-through chrome pipe set includes channel mounts and hardware for mounting to factory brackets
•Pipes measure 40”•Include O
2 sensors and plugs
for non-sensor applications•2” pipes include heat shields•Optional baffles sold separately•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILFOR 85-13 FLT/FLHT/FLHX/FLHS/FLHR AND FLTR MODELS1800-0673 Slash-out, 13/4” $275.951800-0674 Slash-out, 2” 376.95
PART # DESCRIPTION SUG. RETAIL
FOR 85-13 FLT/FLHT/FLHX/FLHS/FLHR AND FLTR MODELS (CONT)1524 Silencer insert, 13/4”, (ea.) $16.951526 Silencer insert, 2”, (ea.) 16.95
13/4” AND 2” DRAG PIPES FOR FXR•Chrome channel-mount pipes attach to factory hanger bracket•OEM midway clamps, or PART #DS-209970, must also be used•2” pipes have a stepped header design•Made in the U.S.A.
13/4” AND 2” DRAG PIPES FOR XL•40” chrome pipes mount to OEM mounting bracket•2” pipes feature a stepped header design for increased performance when used on big-inch motors
•Fit all models including 883C and 1200C•86-87 XL models require brake stop BP-1 (must be ordered separately)•04-13 models use OEM heat shields on 13/4” pipes; 2” pipes include heat shields•04-13 pipes include O
2 sensor bung plugs for 04-06 applications
•Heat shields for other models and baffles for all models are available separately•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILBAFFLES AND HEAT SHIELDS1524 Silencer insert 13/4”, (ea.) $16.951526 Silencer insert 2”, (ea.) 16.95BP-1 Brake stop, 86-87 6.95HS-16 Front heat shield for 13/4” pipes, 86-03 59.95HS-17 Rear heat shield for 13/4” pipes, 86-03 59.95HS-216 Front heat shield for 2” pipes, 86-03 66.95HS-217 Rear heat shield for 2” pipes, 86-03 66.95
1800-06731800-0674
PHD-102-SA
1800-1235
PHD-202-A
PHD-102-A
PHD-100
HS-16 HS-17
HS-216HS-217
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
446
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
13/4” AND 2” STEPPED HEADER SYSTEMSAND MUFFLERS WITH CATALYSTS•Increase flow and performance•Headers include O
2 bungs for both 12mm and 18mm sensors
•Heat shields and mounting hardware included•Mufflers feature internal catalysts; sold in pairs•2” headers must be used with performance mufflers listed; will not accept other mufflers
•Headpipes and mufflers are sold separately•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL31/2” MUFFLERS FOR 13/4” HEADER SYSTEM1801-0440 Slash-down $656.951801-0441 Slash-out 656.951801-0442 Straight-cut Bazooka Tube™ 656.951801-0443 Slash-up 656.95
PART # DESCRIPTION SUG. RETAIL31/2” MUFFLERS FOR 2” HEADER SYSTEM1801-0444 Slash-down $675.951801-0445 Slash-out 675.951801-0446 Straight-cut Bazooka Tube™ 675.951801-0447 Slash-up 675.95
PART # DESCRIPTION SUG. RETAILHEADRER SYSTEM1802-0123 13/4” $516.951802-0124 2” 523.95
1801-0123 w/ 1801-0440 mufflers
1801-0124 w/ 1801-0445 mufflers
1801-0442
1801-0443FOR 09-13 FLHT/FLHR/FLHX/FLTR MODELS
1802-0123
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
447
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
HEADPIPES FOR TOURING MODELS•Feature individual chrome 13/4” header pipes that eliminate the Y-pipe off the rear cylinder•Increase the exhaust flow for better performance•Include heat shields, brackets, clamps and hardware•Accept any 95-13 OEM-style mufflers (sold separately)•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1802-0013 95-06 FLT/FLHT/FLHX/FLTR and FLHR models $528.95
4” MUFFLERS FOR DRESSERS•Chrome finish•Designed for easy installation to OEM brackets•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILFOR 95-13 FLT/FLHT/FLHX/FLTR AND FLHR MODELS (PR.)1801-0302 Slash-down $413.951801-0304 Straight-cut Bazooka Tube™ 413.951801-0610 Tapered w/ gloss black end caps 634.951801-0611 3-ring w/gloss black end caps 639.95
1802-0219 For 09-13 FLHT/FLHR/FLTR/FLHX models $399.95
2-1-2 HEADER•Replacement non-catalyst header for 09-13 Dresser models with 2-1-2 OEM-style catalyst header and dual mufflers
•Chrome-plated, mild-steel construction•Increases exhaust flow and provides less heat to riders leg•Reuses OEM heat shields and cross-under pipe•Includes both large (18mm) and small (12mm) O
2 bungs
•Made in the U.S.A.
1861-0601
1801-0302 1801-0304 1801-0610
1801-06111801-0426 1801-0428
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
448
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
3” MUFFLERS FOR DRESSERS•Available with all-steel performance baffles or baffles with a woven stainless steel sound blanket
•Baffles with woven stainless steel sound blanket help prevent hot spots and discoloration – take the “crackle” out of exhaust for a more mellow tone (recommended for fuel-injected models)
•Easy installation to OEM brackets•Sold in pairs (unless noted)•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILWITH ALL-STEEL PERFORMANCE BAFFLES1801-0060 Slash-out $268.951801-0061 Slash-down 268.951801-0062 Straight-cut Bazooka Tube™ 268.951801-0063 Slash-up 268.951801-0608 Tapered w/ gloss black end caps 434.951801-0609 3-ring w/ gloss black end caps 439.95BAFFLES WITH WOVEN STAINLESS STEEL SOUND BLANKET1801-0067 Slash-out 298.951801-0068 Slash-down 298.951801-0069 Straight-cut Bazooka Tube™ 298.951801-0070 Slash-up 298.95 PART # DESCRIPTION SUG. RETAIL
FOR 95-13 FLT/FLHT/FLHX/FLTR/FLHR AND H-D FL TRIKE MODELS
1801-0067 1801-0068
1801-0070
1801-0069
1801-0061
1801-0062 1801-0063
1801-0060
1801-0608 1801-0609
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
449
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
TWO-PIECE TURNOUT MUFFLERS FOR DRESSERS•Top-quality, chrome replacement, 29” long two-piece mufflers•Include steel core baffles•Mounting brackets are welded on, eliminating the need for additional clamps
•Sold in pairs•Made in the U.S.A.
4” OVAL MUFFLERS•Simply installs onto the stock OEM head pipes
•Feature great sound with increased performance
•Chrome finish•Hardware/mounting brackets included as needed
•Mufflers sold in pairs•Optional chrome heat shields help prevent burns and protect muffler bodies
•Front and rear heat shields sold separately•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1801-0065 For 95-13 FLT/FLHT/FLHX/FLTR and FLHR models $427.95
PART # FITS MODEL SUG. RETAIL
1801-0282 For 08-13 FXDF, 10-13 FXDWG $330.95
CHROME 3” MUFFLERS•Chrome mufflers are available in two different styles
•All-steel performance baffles•Sold in pairs•Made in the U.S.A.
21/2” SLIP-ON REPLACEMENT MUFFLERS•Mufflers feature all-steel cores that won’t burn out•Show-quality chrome will last for years•Mufflers use stock mounts•Sold in pairs•Made in the U.S.A.
1801-0077
1801-0078
1801-0210
1801-0212
1801-0213
SLIP-ON REPLACEMENT MUFFLERS continued on next page.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
4” SLIP-ON REPLACEMENT MUFFLER•Muffler features an all-steel core that won’t burn out
•Show-quality chrome finish will last for years•Muffler uses stock mounts•Made in the U.S.A.PART # DESCRIPTION SUG. RETAILFOR 12-13 FLD1801-0580 Slash-out $199.951801-0581 Slash-down 199.95
1801-0580
1801-0581
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
450
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
13/4” UPSWEEP DRAG PIPES FOR EVOLUTION SOFTAILS•Three different styles of chrome drag pipes to choose from•Include mounting brackets and hardware•Will fit with aftermarket kick start kits•Made in the U.S.A.
NOTE: Additional mounting clamps may be required to mount exhaust systems. Mounting clamps are sold separately.
13/4” UPSWEEP DRAG PIPES AND HEADPIPES FOR TWIN CAM SOFTAILS•Drag pipes available in an unbaffled Fishtail style•Includes hanger brackets and heat shields•Headpipes can be used with a variety of universal mufflers and extensions; sold separately
•Chrome finish•Made in the U.S.A.
NOTE: Additional mounting clamps may be required to mount headpipes. Mounting clamps are sold separately.
FOR 86‑03 XL (CONT)1800‑0908 40” Slash‑cut drag pipes $344.95
13/4” DRAG PIPES FOR EVOLUTION SPORTSTER•Chrome drag pipes for rubber‑mounted Evolution Sportsters•Mount to OEM bracket with included mounting hardware kit•Reuses OEM heat shields•Measures 40” L•Made in the U.S.A.
13/4” DRAG PIPES AND HEADPIPES FOR L85‑06 TOURING MODELS•Pipes feature a bright chrome finish•40” drag pipes include mounting hardware and slider channel for easier mounting
•All pipes include heat shields•Headpipes can be used with a variety of universal mufflers and extensions; sold separately
•Made in the U.S.A.
NOTE: Additional mounting clamps may be required to mount exhaust systems and headpipes. Mounting clamps are sold separately.
PART # DESCRIPTION SUG. RETAILFOR L85‑06 FLT, FLHT, FLHX, FLHR, FLHS AND FLTR MODELS1800‑0925 40” Slash‑cut drag pipes for L85‑06 models $344.951802‑00651 Dual headpipe set for 99‑06 models 689.951802‑00641 Dual headpipe set for 95‑98 models 689.95
PART # DESCRIPTION SUG. RETAILFOR L85‑06 FLT, FLHT, FLHX, FLHR, FLHS AND FLTR MODELS (CONT)1802‑00801 Dual headpipe set for L85‑94 models $689.951802‑0059 2‑into‑1 headpipes only for L85‑94 models 485.951 Includes crossover mounting bracket.
1800‑0925 1802‑0065 Mufflers not included
1802‑0059
1802‑0080
1800‑0909
1800‑0908
1800‑0936
1800‑1024
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
454
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
MUFFLERS•3” chrome, one‑piece 29” L mufflers with welded‑on mounting brackets need no additional clamps•All‑steel baffle construction•Sold individually•Made in the U.S.A.
FISHTAIL MUFFLERS•21/2” chrome mufflers slip over any 13/4” diameter headpipe•Measure 30” long•Baffles are not removable•Sold each•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILFOR 84 FLT/ FLHT1801‑0292 Left side $146.95
PART # DESCRIPTION SUG. RETAIL
FOR 84 FLT/ FLHT (CONT)1801‑0293 Right side $146.95
BELL TIP MUFFLERS•Real ‘60s chopper‑style look•Available in two lengths with a 13/4” i.d. inlet•Universal 3” slider mount on back side of muffler•Sold each•Made in the U.S.A.
PART # DESCRIPTIONSUG.
RETAIL
0410‑2610 Short, 20” long $148.95
PART # DESCRIPTIONSUG.
RETAIL
0410‑2611 Long, 22” long $154.95
FISHTAIL EXTENSION•17/8” chrome straight‑thru Fishtail tail pipe extension•Does not require additional brackets to install•Measures 29” L•Sold each•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1801‑0294 For L85‑94 FLT/ FLHT models $134.95
BUILD YOUR OWN PIPE (“BYOP”) 13/4” EXHAUST PIPE KIT•Everything you need to fabricate a 13/4”‑diameter custom exhaust system
•Kit includes two 24” straight pipes, two 15” 30° bend pipes, two 15” 45° bend pipes, two 15” 75° bend pipes, two 30” 160° bend pipes, two 3” sliders, six 15/8” o.d. sleeves and two 12” straight sections with two sleeves for ports; mounting brackets and flanges sold separately
•Made in the U.S.A.
PART # DESCRIPTIONSUG.
RETAIL
1802‑0108 For Twin Cam, Evolution Big Twin and Sportster engines $230.95
13/4” DRAG PIPES FOR XL WITH RIGID FRAMES•Chrome drag pipes fit all 86‑03 XL motors mounted in rigid frames
•Include slider channels and mounting brackets•Made in the U.S.A.
NOTE: Additional mounting clamps may be required to mount exhaust systems. Mounting clamps are sold separately.
We recommend installing an Fi2000 POWRPRO TUNER with any exhaust change on fuel-injected models. See Fi2000 pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILWITH CHROME HEATSHIELDS1802-0114 For 10-13 FLHT/FLHR models $459.951802-0109 For 09 FLHT/FLHR/FLHX/FLTR models 459.95WITH BLACK HEATSHIELDS1802-0115 For 10-13 FLHT/FLHR models 539.951802-0113 For 09 FLHT/FLHR/FLHX/FLTR models 539.95
POWERPORT HEADPIPES•Dual headpipes taken to a whole new level•PowerPort crossover provides power boost across entire rpm range•Dual pipe styling with 2-into-1 performance•2.5” heat shields•Quick, simple installation•Accepts OEM mufflers or any 95-13 OEM style mufflers•Made in the U.S.A.
NOTE: Mufflers not included; must be purchased separately.
PART # DESCRIPTION SUG. RETAIL
1800-0635 For 07-08 FLHT, FLTR, FLHR models $409.951800-0634 For 95-06 FLT, FLHT, FLTR, FLHR models 409.95
TRUE DUALS HEADER SYSTEM•Systems feature individual 13/4” headpipes for increased exhaust flow•2.5” one-piece heat shields provide proportionality and seamless, unbroken flow to traditionally styled V-Twins
•Accepts Cobra slip-on mufflers or any 95-13 OEM-style mufflers
NOTE: Mufflers not included; must be purchased separately.
PART # DESCRIPTION SUG. RETAILWITH CHROME HEATSHIELDS1800-1230 For 10-13 FLHT/FLHR models $649.951800-1176 For all 09 FLHT/FLHR/FLHX/FLTR models 649.95
PART # DESCRIPTION SUG. RETAILWITH BLACK HEAT SHIELDS1800-1231 For 10-13 FLHT/FLHR models $749.951800-1229 For all 09 FLHT/FLHR/FLHX/FLTR models 749.95
SPEEDSTER DUALS•Great sound that’s enhanced by the proprietary PowerPort crossover
•PowerPort crossover also provides power boost across entire rpm range
•Traditional dual pipe styling with 2-into-1 performance
•2.5” heat shields•Straight-cut, chromed billet tip finishes off the pipes
•Quick, easy installation•Made in the U.S.A.
1802-0109
1802-0113
Powerport
1800-12291800-1176
1800-0634
Powerport
Left side
Right side
1800-0635
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
456
We recommend installing an Fi2000 PowrPro TUnEr with any exhaust change on fuel-injected models. See Fi2000 pages in Section 7.
SEE PAGE 335 For IMPorTAnT InForMATIon rEGArDInG CErTAIn wArrAnTY AnD EXHAUST rEGULATorY CoMPLIAnCE InForMATIon.
PArT # DESCrIPTIon SUG. rETAIL
CHroME
1801-0359 For 00-06 FLSTF/FXSTD models $309.95
1801-0360 For 07-13 FLSTF/FXSTD models 309.95
1801-0361 For 07-13 FLSTN/FLSTSB models 309.95
1801-0362 For 07-13 FXST/B/C, FLSTC, FXCW/C models 309.95
1801-0491 For 08-13 FXDF, 10-13 FXDWG models 359.95
1801-0492 For 95-13 FLHT/FLHR/FLHX/FLTR and H-D FL Trike models 399.95
1801-0493 For 04-13 XL models 359.95
1801-0643 For 12-13 XL1200V models 359.95
3” SLIP-on MUFFLErS•3” chromed or black muffler bodies for great sound•Radially slashed, chromed billet tips can be rotated to three positions•Includes OEM-style cross-over on models that came stock with one for enhanced performance
•Comes with 2” constant velocity baffles that use bonded e-class sleeve with stainless mesh
•Fits stock headpipes•Easy installation using stock mounting brackets•Made in the U.S.A.
1801-0359
1801-0363
3” Cut-away
1801-0361
1801-0642
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
457
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
CENTER-PRO SLIP-ON MUFFLER•Industry first, center-port exhaust with superior performance•Unique 2-into-1 design•Both mufflers join at the rear beneath the fender for center port exhaust location
•Slips on as a single unit to the stock head pipes (or Cobra PowerPort Dual head pipes)
•Not designed to fit on motorcycles using extended bags•Single, polished and chromed steel exhaust tip finished with a perfectly rolled edge
•Constant velocity baffles are not removable•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1801-0641 For 95-13 FLT/FLHT/FLHR/FLHX/FLTR $599.95
POWR-FLO 41/2” SLIP-ON MUFFLERS•4.5 inch body tapers to 4-inch round at the front•4.5-inch machined aluminum, thin-line tip•3-inch core for superior performance•Acoustical engineering developments allow an incredibly deep sound because of intense, class-leading resonance absorption and prevention
•Uses proprietary materials with specific acoustical dampening and thermal insulation properties
•The frequency and location of the perforation patterns in the cores creates significant sound scattering in the mid frequencies, which helps to enhance the low frequency tones
•Made in the U.S.A.
TRI-FLO SLIP-ON MUFFLERS•Tri-oval-shaped muffler rear seamlessly transforms into 4-inch round front
•5-inch wide, 4-inch tall thin-line aluminum tip •3-inch core for superior performance•Acoustical engineering developments allow an incredibly deep sound because of intense, class-leading resonance absorption and prevention
•Uses proprietary materials with specific acoustical dampening and thermal insulation properties
•The frequency and location of the perforation patterns in the cores creates significant sound scattering in the mid frequencies, which helps to enhance the low frequency tones
•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1801-0637 For 95-13 FLT/FLHT/FLHR/FLHX/FLTR, chrome $599.95
PART # DESCRIPTION SUG. RETAIL
1801-0638 For 95-13 FLT/FLHT/FLHR/FLHX/FLTR, black $649.95
1801-0637
We recommend installing an Fi2000 POWRPRO TUNER with any exhaust change on fuel-injected models. See Fi2000 pages in Section 7.
1801-0639
PART # DESCRIPTION SUG. RETAIL
1801-0639 For 95-13 FLT/FLHT/FLHR/FLHX/FLTR, chrome $599.95
PART # DESCRIPTION SUG. RETAIL
1801-0640 For 95-13 FLT/FLHT/FLHR/FLHX/FLTR, black $649.95
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
458
We recommend installing an Fi2000 POWRPRO TUNER with any exhaust change on fuel-injected models. See Fi2000 pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
4” SLIP-ON MUFFLERS•Increase horsepower and torque with a deeper, more aggressive exhaust note•Welded from mild steel then bathed in a four-step chrome-plating process•4” muffler body uses a cooling chamber with proprietary technology to prevent blueing•Available in several styles: straight cut features billet tips•All necessary mounting hardware and instructions included, ensuring problem-free installation•Made in the U.S.A.
Billet end tip1801-0099 1801-0590
PART # DESCRIPTION SUG. RETAIL
CHROME
1801-0358 For 95-13 FLHT/FLHR/FLHX/FLTR models $539.95
1801-0455 For 10 FLHX/FLTRX models 269.95
PART # DESCRIPTION SUG. RETAIL
BLACK
1801-0408 For 95-13 FLHT/FLHR/FLHX/FLTR models $639.95
TRI-OVAL SLIP-ON MUFFLERS•Incredible deep resonance that passes existing sound guidelines
•Tri-Oval design with full-size, billet V-tip with dual exhaust ports•Round front seamlessly morphs to tri-oval shape at the rear•Nearly 5.5” wide and 3.5” high at the rear•Increased performance gains over stock mufflers•Also available with black body and chromed tip•Mufflers end at the rear of the bags•Simple installation; mounts to stock headpipes or to Cobra PowerPort headpipes
•Made in the U.S.A.
1801-0358
1801-0497
BLV6201SD
BLV6201UC
PART # DESCRIPTION SUG. RETAILFOR 95-13 FLT/FLHT/FLHR/FLHX/FLTR MODELS1801-0497 Scallop cut $499.95BLV6201SD Slash Down 419.95BLV6201UC Upper Cut 419.951801-0099 Straight Cut w/ billet tip 485.95
PART # DESCRIPTION SUG. RETAILFOR 12-13 FLD1801-0590 Slash Down $249.95FOR 10 FLHX/FLTRX MODELS1801-0454 Straight Cut w/ billet tip 249.95
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
1800-0087
1800-1225
TRI-PRO 2-INTO-1 EXHAUST•2-into-1 exhaust system delivers increased low- and mid-range performance gains over the stock system
•Features a unique tri-oval muffler design, with a full-size, aluminum V-tip with dual exhaust ports
•Available in chrome or black with a chromed aluminum V-tip•Heat shields mount to head pipes; heat shields cover collector area•Made in the U.S.A.
459
We recommend installing an Fi2000 POWRPRO TUNER with any exhaust change on fuel-injected models. See Fi2000 pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILSLASH-DOWN1800-1397 For all 12-13 FXST/FLST models, chrome heat shields $629.951800-1398 For all 12-13 FXST/FLST models, black heat shields 679.951800-0413 For all 07-11 FXST/FLST models, chrome heat shields 629.951800-1226 For all 07-11 FXST/FLST models, black heat shields 679.951800-0087 For all 86-06 FXST/FLST models, chrome heat shields 609.951800-0761 For all 08-11 FXCW/C models, chrome heat shields 629.951800-1399 For all 12-13 Dyna models (except FLD), chrome heat shields 629.951800-1400 For all 12-13 Dyna models (except FLD), black heat shields 679.95
PART # DESCRIPTION SUG. RETAIL
SLASH-DOWN (CONT)1800-0808 For all 06-11 Dyna models, chrome heat shields $629.951800-1227 For all 06-11 Dyna models, black heat shields 679.951800-0088 For all 91-05 Dyna models, chrome heat shields 609.951800-1402 For all 07-13 XL models, chrome heat shields 629.951800-0414 For all 07-13 XL models, chrome heat shields 629.951800-1403 For all 07-13 XL models, black heat shields 679.951800-1401 For all 04-06 XL models, chrome heat shields 609.95
PART # DESCRIPTION SUG. RETAILSWEPT1800-0973 For 07-11 FXST/FLST models, chrome heat shields 689.951800-1224 For 07-11 FXST/FLST models, black heat shields 789.951800-0972 For 86-06 FXST/FLST models, chrome heat shields 689.951800-0974 For 08-11 FXCW/C models, chrome heat shields 699.951800-1225 For 08-11 FXCW/C models, black heat shields 789.95
for 86-11 FXST/FLST models $29.951861-0535 Optional footpeg relocation bracket
for 08-11 FXCW/C models 29.95
SPEEDSTER EXHAUSTS (WITH POWERPORT)•PowerPort crossover makes for a significant power increase from just off idle to redline, which leads to a deep and aggressive exhaust tone
•PowerPort increases power and overall performance by providing superior scavenging of exhaust gases over most standard exhaust systems; similar to what you might expect from a 2-into-1 system
•Large 2.5”, 222°, full-length heat shields fit from the exhaust ports to the billet tips for a seamless look and no blueing
•Show-chrome or black finished heat shields with beautifully machined chrome billet end caps for a truly custom finish
•Available in slash-down, swept, short, long and xtra long styles•Includes mounting hardware and removable baffles for simple installation
•Power with social responsibility•Made in the U.S.A.
NOTE: The Swept exhaust requires the removal of the right-side passenger footpeg; optional relocation bracket curves up from under the pipe to relocate the peg in the proper position.
We recommend installing an Fi2000 POWRPRO TUNER with any exhaust change on fuel-injected models. See Fi2000 pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILSHORT SWEPT1800-1489 For all 10-13 Dresser models, chrome heat shields $699.951800-1490 For all 10-13 Dresser models, black heat shields 799.951800-1381 For all 12-13 FXST/FLST models, chrome heat shields 699.951800-1382 For all 12-13 FXST/FLST models, black heat shields 799.951800-1379 For all 07-11 FXST/FLST models, chrome heat shields 699.951800-1380 For all 07-11 FXST/FLST models, black heat shields 799.95
PART # DESCRIPTION SUG. RETAIL
SHORT SWEPT (CONT)1800-1378 For all 86-06 FXST/FLST models, chrome heat shields $699.951800-1468 For all 12-13 Dyna models (except FLD), chrome heat shields 699.951800-1469 For all 12-13 Dyna models (except FLD), black heat shields 799.951800-1466 For all 06-11 Dyna models, chrome heat shields 699.951800-1467 For all 06-11 Dyna models, black heat shields 799.95
1800-1489
PART # DESCRIPTION SUG. RETAILSHORTS1800-0759 For all 08-11 FXCW/C models, chrome heat shields $599.951800-0025 For all 86-06 FXST/FLST models, chrome heat shields 599.951800-0806 For all 06-11 Dyna models, chrome heat shields 599.951800-0026 For all 91-05 Dyna models, chrome heat shields 599.951800-1392 For all 07-12 XL models, chrome heat shields 599.951800-1391 For all 04-06 XL models, chrome heat shields 599.951800-0210 For all 04-06 XL models, chrome heat shields 599.95
PART # DESCRIPTION SUG. RETAILLONGS1800-1404 For all 12-13 FXST/FLST models, chrome heat shields $629.951800-0415 For all 07-11 FXST/FLST models, chrome heat shields 629.951800-0027 For all 86-06 FXST/FLST models, chrome heat shields 609.951800-0809 For all 06-11 Dyna models, chrome heat shields 629.951800-0028 For all 91-05 Dyna models, chrome heat shields 609.95
PART # DESCRIPTION SUG. RETAILXTRA LONGS1800-0416 For all 07-08 Dresser models, chrome heat shields $629.951800-0195 For all 95-06 Dresser models, chrome heat shields 609.95
1800-0806
Billet tip
1800-0027
1800-0195
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
461
We recommend installing an Fi2000 POWRPRO TUNER with any exhaust change on fuel-injected models. See Fi2000 pages in Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
1800-0411 For all 07-11 FXST/FLST models $519.951800-0760 For all 08-11 FXCW/C models 519.951800-0199 For all 86-06 FXST/FLST models 499.951800-0807 For all 06-11 Dyna models 519.95
PART # DESCRIPTION SUG. RETAIL
1800-0198 For all 91-05 Dyna models $499.951800-1396 For all 07-13 XL models 519.951800-0412 For all 07-13 XL models 519.951800-1395 For all 04-06 XL models 499.95
DRAGSTERS•Perfect update to traditional drag pipes; maintains clean, pure drag-pipe appearance
•Full-length, 2.5” heat shields with a 222° wraparound for a non-blueing appearance
•Capped with machined and chromed billet tips
•Removable performance cores•Feature power with social responsibility•Made in the U.S.A.
Billet end tip
1800-0199
1800-0807
1800-1396
PART # DESCRIPTION SUG. RETAIL
BLV6800 For 86-06 FXST/FLST $419.95
21/4” HOT ROD EXHAUST SYSTEM•13/4” headpipes flow into 21/4” muffler bodies•Full-length 215° wraparound heat shields match the diameter of muffler bodies
•Headpipes, mufflers and heat shields are triple chrome-plated•Removable baffles accessed by backing out a single screw•All necessary mounting hardware and instructions included, ensuring problem-free installation
•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1800-1383 For all 12-13 FXST/FLST models, chrome $589.951800-0408 For all 07-11 FXST/FLST models, chrome 589.951800-0204 For all 86-06 FXST/FLST models, chrome 569.951800-1384 For all 12-13 Dyna models (except FLD), chrome 589.951800-0805 For all 06-11 Dyna models, chrome 589.951800-0203 For all 91-05 Dyna models, chrome 569.951800-0757 For all 07-08 Dresser models, chrome 599.951800-0756 For all 95-06 Dresser models, chrome 579.951800-1321 For all 04-06 XL models, chrome 569.95
POWERPRO HP 2-INTO-1 EXHAUST•New design with a sleek cylindrical muffler body in addition to the megaphone style of the original PowerPro
•Lustrously chromed 3.5” muffler body with a delicately machined chromed billet tip
•Full-length chrome or black collector heat shield coverage
•Internal cooling technology for non-blueing muffler body
•Double-insulated body•Removable baffles•Made in the U.S.A.
1800-0204
1800-1322
31/2” DELUXE SLASH CUT EXHAUST•13/4” headpipes flow into 31/2” muffler bodies•Mufflers feature radial slash cut•Full-length 215° wraparound heat shields run from exhaust port to muffler body
•Headpipes, mufflers and heat shields are triple chrome-plated•Removable baffles accessed by backing out a single screw•All necessary mounting hardware and instructions included, ensuring problem- free installation
•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
BLV6500 For 86-06 FXST/FLST $419.95
PART # DESCRIPTION SUG. RETAIL
1800-1322 For all 04-06 XL models, black heat shields $669.951800-1323 For all 07-13 XL models, chrome 589.951800-1324 For all 07-13 XL models, black heat shields 689.95
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
PART # DESCRIPTION SUG. RETAIL4” MUFFLERS, CHROME (PR.)1801-0616 With slash down end caps $549.951801-0618 Without end caps 524.954” MUFFLERS, JET-HOT® BLACK CERAMIC (PR.)1801-0617 With slash down end caps 649.951801-0619 Without end caps 649.95
PART # DESCRIPTION SUG. RETAILOPTIONAL 4” END CAPS (PR.)1861-0812 Chrome straight $124.951861-0813 Black straight 124.951861-0814 Chrome sculpted 124.951861-0815 Black sculpted 124.95
SPO® OVAL SLIP-ON MUFFLERS•Newly restyled S&S SPO® mufflers•Same great performance as S&S performance oval slip-ons, but feature sculpted alloy end-caps with chrome or black finish•Muffler features double-walled construction, dual-layer wrapping and quality chrome or Jet-Hot® ceramic finish
•Sold in pairs•Made in the U.S.A.
462
PART # DESCRIPTION SUG. RETAILFOR 09-13 FLHT, FLHR, FLHX, FLTR MODELS1802-01311 Chrome $524.951802-02511 Black ceramic 624.95
PART # DESCRIPTION SUG. RETAILFOR 95-08 FLT, FLHT, FLHR, FLHX, FLTR MODELS1802-01302 Chrome $524.951802-02502 Black ceramic 624.951 Has 12mm and 18mm sensor ports and plugs.2 Has 18mm sensor ports and plugs.
1802-0131
1802-0251
1801-0472
1801-0473
1801-0595
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
4” RACE TOUR MUFFLERS•Produces exceptional mid-range to high end torque and horsepower
•Loud aggressive sound with Race Tour Baffle
•Fits all stock and aftermarket headers
•4” diameter is the same as stock mufflers
•Right muffler has special clearance for axle nut•Available with slash-down end caps or without end caps (opt. end caps must be ordered separately) in either chrome or Jet-Hot® black ceramic finish
•Mounting hardware and instructions included for installation of the end cap
•Made in the U.S.A.
FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE MODELS (EXCEPT 10 FLHX/FLTRX)
1801-0616
1801-0619Shown with1861-0812 end caps
1861-0813
1861-0814
POWER TRUE DUALS HEADERS•Independent dual look with “under the bike” cross-over•Hidden crossover passage between front and rear pipes for maximum performance•Full black ceramic heat shield with 220° coverage•Available in chrome or Jet-Hot® ceramic finish•Compatible with 95-13 style slip-on Dresser mufflers•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILFOR 95-13 FLT, FLHT, FLHR, FLHX AND FLTR MODELS1801-0472 Chrome w/ chrome end-cap $779.951801-0595 Jet-Hot® ceramic
w/ chrome end-cap 899.95
PART # DESCRIPTION SUG. RETAIL
FOR 95-13 FLT, FLHT, FLHR, FLHX AND FLTR MODELS (CONT)1801-0473 Chrome w/ high-temp black
Xylan® end-cap $779.95
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
463
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILPOWER-TOUR1801-0461 Slash-back, chrome $398.951801-0462 Slash-down, chrome 398.951801-0596 Slash-down, black ceramic 500.00
PART # DESCRIPTION SUG. RETAIL
POWER-TOUR (CONT)1801-0464 Chrome w/ black Teflon™ billet end caps $547.951801-0597 Black ceramic w/ chrome billet end caps 629.95
31/2” POWER-TOUR MUFFLERS•31/2” diameter mufflers with black ceramic finish•Great sound and increased performance•Work with stock or modified engines•Available in Power-Tour performance style•Sold in pairs•Made in the U.S.A.
FOR 95-13 FLT, FLHT, FLHR, FLHX, FLTR AND H-D FL TRIKE MODELS WITH DUAL EXHAUST
3” SLIP-ON PERFORMANCE MUFFLERS•Increase your performance on a stock or modified motor•Finished in show-quality chrome, and are compatible with stock headpipes, mounting brackets, hardware and heat shields
•Available in slash-cut or tapered design•Slash-cut baffles are removable, tapered are not removable•Made in the U.S.A.
1801-0233
0410-60011801-0140
1801-0017
1801-0536
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
464
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
CUSTOM EXHAUST SYSTEMS•Mandrel bent from .065” tube, then chromed to a show finish•Heat shields are included (unless noted)•All pipes (except 131’s) come with dual O
2 sensor ports and plugs
•103’s are triple stepped from 13/4” to 21/4” to 21/2”•131’s are triple stepped into a soft bend on a 2.5” mandrel bent thick-walled pipe•Phat’s pipes are stepped from 13/4” to 21/4”; available with heat shields•D-2’s are triple stepped ending with a 2.5” slash cut; available with chrome heat shields or black ceramic heat shields with holes that allow the chrome pipes to show through
•D-3’s are triple stepped ending with 2.5” slash cut•Works with both left and right side drive bikes; also works on Big Dog motorcycles•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILFOR 86-11 FXST/FLST AND MOST CUSTOM RIGID MODELS1800-0999 103’s $821.951800-1295 Phat’s w/ heat shields 849.95
PART # DESCRIPTION SUG. RETAIL
FOR 86-11 FXST/FLST AND MOST CUSTOM RIGID MODELS (CONT)1800-1150 D-2’s w/ chrome heat shields $899.951800-1296 D-2’s w/ black heat shields 899.951800-1159 D-3’s 849.95
1800-0999
1800-1159
1800-1295
1800-1296
224 MUFFLERS•Give your V-Twin the look and sound of true American muscle
•21/4” diameter bodies•Four fiber glass wrapped removable baffles unleash the growl and rumble that will bring your bike to life
•Customize your pipes with optional Family Jewel billet tips (sold separately)
•Easily installs to your stock head pipes•Sold in pairs•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1801-0494 For 95-13 FLT/FLHT/FLHR/FLTR and H-D FL Trike $499.95
BELL-END MEGAPHONE MUFFLERS•Retro styling brings back the glory days of choppers•13/4” inlet; reducer allows additional fitment to 15/8” and 11/2”•Removable baffle•Available in standard or upswept styles•Sold each
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
RT-ONE EXHAUST SYSTEM•Complete exhaust system includes a large-diameter headpipe exiting into a lightweight aluminum muffler
•Big power increase and huge weight savings•Straight-through perforated core offers maximum flow•Made in the U.S.A.
NOTE: Jardine RT-One exhaust systems and slip-ons feature a high-flow large-diameter perforated core for maximum performance. Sound levels are racetrack-oriented. Jardine recommends the use of a QMI (Quiet Module Insert) (sold separately) to civilize and control the exhaust tone to reasonable levels for street use.
PART # DESCRIPTION SUG. RETAILFOR 00-09 BUELL BLAST1800-0029 RT-One system $345.951860-0008 Quiet Module Insert 39.95
RT-FIVE SLIP-ON MUFFLERS•Available with aluminum or carbon fiber canisters•Free-flowing race baffle•Precision fit with fixed mounting points•Carbon fiber end cap•Dyno-tested for maximum horsepower gain•Include stainless steel mid-pipes•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILFOR 08-09 BUELL 1125R1801-0299 Aluminum canister, carbon fiber end cap $537.951801-0300 Carbon fiber canister, carbon fiber end cap 644.95
RT-ONE SLIP-ONS•Boost power over a wide rpm band•Free-flowing race-style baffle•Dyno-tested for smooth power delivery and superior performance
•Available with polished aluminum or carbon fiber canisters
•Quiet Module Insert (QMI) sold separately•Made in the U.S.A.
NOTE: Jardine RT-One exhaust systems and slip-ons feature a high-flow large-diameter perforated core for maximum performance. Sound levels are racetrack-oriented. Jardine recommends the use of a QMI (Quiet Module Insert) to civilize and control the exhaust tone to reasonable levels for street use.
GP1 SLIP-ON MUFFLER•Stylish, affordable and lightweight•Muffler features a black powder-coated canister•Features a laser-etched GP1 logo•Installation is a breeze, requiring at the most a couple of wrenches and a screwdriver
FOR 03-08 XB9R, 04-09 XB12R/XB12S, 05-09 XB9SX, 08-09 XB12X (EXCEPT INTERNATIONAL MODELS) (CONT)1860-0007 Quiet Module Insert $39.95
PART # DESCRIPTION SUG. RETAIL
1801-0261 For 02-08 XB9R, 05-09 XB9SX, 04-09 XB12R/S, 07-09 XB12X (except International models) $428.95
1800-0029
1801-0299
1801-0004
1860-0007
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
466
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
1800-1297 For 09-12 XR1200/1200X, titanium $1,999.951800-1232 For 09 BUELL 1125R/CR/RR, stainless steel 1,699.95
APEX EXHAUST SYSTEMS•Aggressive sound and look for closed course use only
•Saves significant weight over stock system; improves even more the power-to-weight ratio
•Complete system allows simple access to clutch and other areas under race conditions without dropping the engine out
•Available in titanium or stainless steel•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1801-0357 For 09-12 XR1200/1200X; carbon $899.951801-0465 For 09 1125R/CR/RR; titanium 549.95
APEX SLIP-ON MUFFLERS•Carbon fiber or titanium slip-ons complement “racer look” of machines
•Integrated fit to coordinate with body lines and maintain centralized mass design of motorcycle
•Unique and distinctive sound due to overall diamond shape and outlet; quiet insert also included
•Considerable weight savings over stock translates into more power•Improved ground clearance•Slip-on design provides easy installation•Made in the U.S.A.
NOTE: PART #1801-0357 may require simple re-adjustment of stock header heat shields.
PART # DESCRIPTION SUG. RETAIL
1812-0169 Xtreme Slash $59.951812-0170 Scalloped 59.951812-0171 Mini Scalloped 49.95
FAMILY JEWEL EXHAUST TIPS•Each tip can be rotated into almost limitless positions, and are sold individually so you can mix and match them to create a unique look for your motorcycle
•Tips are adaptable to almost any straight-cut, 21/4” exhaust tube, such as those offered by Baron, LA Chopper, Samson, D&D, Cobra, BUB and Hardkrome
•All tips come with a seamless mounting system for that smooth look•Made in the U.S.A.
1812-0170
1812-0169
1812-0171
1800-1297
1801-0465
1801-0357
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
467
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
ELITE EXHAUST END CAPS•CNC machined billet aluminum construction •Available in chrome and Contrast Cut™•Contrast Cut™ starts with a polished end cap that has been black anodized, then re-cut to open up the design•Available in four designs and six applications •Sold each•Made in the U.S.A.
Sweep Contrast Cut™
Sweep Contrast Cut™
Clean Cut Contrast Cut™
Sweep Chrome
Clean Cut Chrome
Slash Contrast Cut™ Slash Chrome
Tech 10 Contrast Cut™ Tech 10
Chrome
PART # DESCRIPTION SUG. RETAILFOR 31/2” RINEHART EXHAUST1802-0216 Reverse cut, chrome $309.951802-0215 Reverse cut, black 309.951802-0218 Cross cut, chrome 309.951802-0217 Cross cut, black 309.95
PART # DESCRIPTION SUG. RETAILFOR 4” RINEHART EXHAUST1802-0212 Reverse cut, chrome $309.951802-0211 Reverse cut, black 309.951802-0214 Cross cut, chrome 309.951802-0213 Cross cut, black 309.95
EXHAUST TIPS FOR RINEHART EXHAUST•CNC-machined from 6061 T-6 billet aluminum•Designed to match Eddie Trotta Reverse Cut Fork Sliders•Available in two styles for 31/2” and 4” Rinehart exhaust in either chrome or black anodized finishes
•Sold in pairs•Made in the U.S.A.
1802-02141802-0213
1802-0212
1802-0211
Merc Black Ops
Merc Contrast Cut™
Merc Chrome
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
468
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR BASSANI 4” MEGAPHONE DRESSER MUFFLERS1802-0091 Black diamond edge $339.95FOR 95-08 RINEHART “TRUE DUAL” DRESSER MUFFLERS1802-0092 Black diamond edge 339.95
PART # DESCRIPTION SUG. RETAILFOR RINEHART 4” DIAMETER MUFFLERS1802-0199 Gloss black powder coated $359.951802-0200 Chrome 359.951802-0201 Black diamond edge 499.95
EXHAUST TIPS•CNC-machined billet aluminum construction
•Sold in pairs•Made in the U.S.A.
1802-0091 1802-0200 1802-0201
PART # DESCRIPTION SUG. RETAIL
DS-202049 Exhaust tip $99.95
FISHTAIL EXHAUST TIP•Chromed steel exhaust tip for all 13/4” o.d. exhaust pipes
SLIP-ON MUFFLER SLEEVES•Customize the look of your exhaust•Muffler sleeves are laser-cut steel construction•Install on mufflers for custom look or to hide scratches, scrapes, discoloration and rust
•Durable black powdercoat finish•Sold in pairs•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILFOR ALL MODELS WITH 8-PIN TAIL LIGHT PLUG1802-0262 31/2” chrome $299.951802-0263 31/2” ceramic black 299.951802-0264 4” chrome 299.951802-0265 4” ceramic black 299.95FOR 11-13 FLHX/FLTRX WITH MOLEX CONNECTOR1802-0266 31/2” chrome 299.951802-0267 31/2” ceramic black 299.951802-0268 4” chrome 299.951802-0269 4” ceramic black 299.95
AFTERBURNER EXHAUST TIPS•Afterburners are replacement lighted muffler tips with a three function red, run & brake, and amber turn signal function
•Comes complete with plug-in wire harness•These lights have been heat tested to 450 degrees•Available for most 31/2” & 4” mufflers•Available in chrome or ceramic black•Patent pending•Sold in pairs
NOTE: The 31/2” mufflers require an inside diameter of 3.660”
NOTE: The 4” mufflers require an inside diameter of 3.8650”
1861-0795
1861-0799 1861-0803
1802-0262
1861-0769
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
469
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
1861-0102 Flaming skull heat shields $79.95
FLAMING SKULL HEAT SHIELDS•Measure 10” in length•Chrome-plated finish•Universal fit for 2” – 21/4” exhaust pipes
•Sold in pairs; clamps included
•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAILFOR 21/4” PIPES1861-0731 Satin black $23.951861-0732 Chrome 23.95FOR 13/4” PIPES1861-0782 Chrome 23.951861-0783 Satin black 23.95
SKULL HEAT SHIELDS•Available in chrome or satin black•9” long; includes two mounting clamps•Available for 21/4” and 13/4” outside diameter pipes•Sold each
UNIVERSAL HEAT SHIELDS•Chrome universal heat shields available for 13/4”, 2” or 21/4” pipes
•Include mounting clamps•Sold each•Made in the U.S.A.
DS-203071DS-203072
DS-203073
990165
1861-0731
1861-0732
Before After
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
MUFFLER ADAPTER•Fits between the stock collector headpipe on 2010 FLHX/FLTRX with stock OEM 2-into-1 systems and the muffler
•Allows the use of most 95-13 bagger mufflers with standard 13/4” inlet to be used with 2-in-1 H-D headpipe
•Includes the swedged pipe, heat shield and mounting hardware•Heavy-duty 16-gauge steel; pipe is chrome and heatshield is polished and chrome plated
•Made in the U.S.A.
HEAT SHIELDS•Chrome heat shields with no cutouts designed to fit Cycle Shack exhaust systems noted
•Easily installed with supplied hose clamps•Sold each•Made in the U.S.A.
470
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
1802-0119 Muffler adapter $50.95
PART # DESCRIPTION SUG. RETAILFITS MHD138 AND MHD338 SERIES MUFFLERS ON 00-06 FLSTF/FXSTDHS-37 Front muffler inlet heat shield $57.95HS-38 Rear muffler inlet heat shield 72.95 PART # DESCRIPTION SUG. RETAILFITS CYCLE SHACK 13/4” AND 2” M-PIPES AND DRAG PIPES ON 84-06 FXST/FLST MODELS (EXC. FLSTS)HS-14X Front heat shield, 13/4” pipes (23”) $77.95HS-15X Rear heat shield, 13/4” pipes (231/2”) 79.951861-0049 Front heat shield, 13/4” pipes (14”) 50.951861-0050 Rear heat shield, 13/4” pipes (18”) 52.951861-0052 Front heat shield, 2” pipes 68.951861-0053 Rear heat shield, 2” pipes 67.95
PART # DESCRIPTION SUG. RETAILFITS PHD-102 AND 116 SERIES EXHAUST ON 86-03 XLHS-16 13/4” front heat shield $59.95HS-17 13/4” rear heat shield 59.95FITS PHD-202 AND 216 SERIES EXHAUST ON 86-03 XLHS-216 2” front heat shield 66.95HS-217 2” rear heat shield 66.95
HP-PLUS® DRAG PIPE BAFFLES•Dampen sound without impeding flow-through performance
•All steel construction; baffles feature patented HP-Plus® design•Install easily on 13/4” or 2”, 16- or 18-gauge drag pipes•Baffles held by 1/4”-20 screws and locking nuts•Sold in pairs or each•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
V22897 Repl. end-cap O-ring (ea.) $7.95
REPLACEMENT END CAP O-RING FOR 2-INTO-1 CLASSIC SYSTEMS V22897
1861-0049
1861-0050
1861-0052
1861-0053
HS-15X
HS-14X
HS-17HS-16
HS-216
HS-37 HS-38
HS-217
1861-0046 1861-0048
DS-202011
OPTIONAL COMPONENTS FOR PRO PIPE HI-OUTPUT•Optional quiet insert or heat shields are available as listed
•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1861-0606 Opt. quiet insert (requires baffle mods) (ea.) $28.951861-0613 Opt. heat shields for PART #1800-1213, 1800-1018 (set) 169.95
PART # DESCRIPTION SUG. RETAIL
1861-0616 Opt. heat shields for PART #1800-1016 (set) $169.951861-0617 Opt. heat shields for PART #1800-1021 (set) 169.95
1861-0606
1861-0616 1861-0617
V22533PART # DESCRIPTION SUG. RETAIL
V22533 Allen cap screw kit $1.951860-0547 Dog Bone nut plate 9.95
REPLACEMENT COMPONENTS•For use with Vance & Hines’ exhaust systems
1860-0547
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
471
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
BAFFLES FOR H-D SCREAMIN’ EAGLE™•High-quality steel performance baffles for 07-08 H-D Screamin’ Eagle™ mufflers
•Improves the power and sound of your bike•Sold in pairs•Made in the U.S.A.
NOTE: Not for use with 08 California catalyst equipped mufflers.
1861-0467 Fits OEM #64985-07A, 65467-05 2” x 261/4” 57.95
1861-0468 Fits OEM #80492-07, 80493-07, 80503-07 17/8” x 157/8” 39.95
1861-0469 Fits OEM#80490-07, 80491-07, 80498-07, 80499-07 2” x 263/8” 46.95
1861-0623 Fits OEM #80674-08 17/8” x 221/4” 41.95
1861-0467
1861-0465
1861-0468
1861-0466
1861-0469
SILENCER INSERTS•Available in two sizes to fit either 13/4” or 2” pipe•Sold each•Made in the U.S.A.PART # DESCRIPTION SUG. RETAIL
1526 Silencer insert for all 2” drag pipes (except Python®) (ea.) $16.95
1524 Silencer insert for all 13/4” drag pipes (ea.) 16.95
SS-1S Silencer for 13/4” slash-cut M-Pipes (ea.) 23.95
DS-209091 XP performance silencer for 21/2” slash style mufflers 23.95
UNIVERSAL BAFFLES•Ideal for replacing rusted-out exhaust baffles
•Work great for custom fabrication as well•1.0”, 1.5”, 1.625”, 1.75” and 2.0” o.d. tubing is 22-gauge stainless steel
•All have 1/8” diameter holes, 3/16” staggered centers, 33 holes per square inch and 40% open area
•2.5” and 3.0” o.d. tubing is 16-gauge stainless steel; perforated sheet is 20-gauge stainless steel
•Sold each•Made in the U.S.A.
1524
1526
DS-209091
SS-1S
PART # DESCRIPTION SUG. RETAIL
24” LONG BAFFLES
1860-0237 1.0” dia. $21.95
1860-0611 1.25” dia. 20.95
1860-0238 1.5” dia. 21.95
1860-0614 1.625” dia. 23.95
1860-0461 1.75” dia. 24.95
1860-0239 2.0” dia. 26.95
1860-0240 2.5” dia. 39.95
1860-0617 3.0” dia. 43.95
48” LONG BAFFLES
1860-0241 1.0” dia. 39.95
1860-0613 1.25” dia. 38.95
1860-0242 1.5” dia. 39.95
1860-0616 1.625” dia. 44.95
1860-0462 1.75” dia. 47.95
1860-0243 2.0” dia. 49.95
1860-0244 2.5” dia. 79.95
1860-0619 3.0” dia. 84.95
PERFORATED SHEET
1860-0245 6” x 10” 19.95
PART # DESCRIPTION SUG. RETAIL
24” LONG BAFFLES
1860-0463 1.0” dia. $32.95
1860-0612 1.25” dia. 34.95
1860-0464 1.5” dia. 32.95
1860-0615 1.625” dia. 36.95
1860-0465 1.75” dia. 36.95
1860-0466 2.0” dia. 36.95
1860-0467 2.5” dia. 49.95
1860-0618 3.0” dia. 57.95
MUFFLER PACKING ONLY
1860-0468 10” x 12” sheet 6.95
24” Baffles
1860-0245
EXHAUST PART #
REPL. BAFFLE PART #
REDUCED DB BAFFLE PART #
31/2” SLIP-ONS
1801-0366 1861-0575 1801-0578
1801-0359 1861-0576 1861-0579
1801-0360 1861-0576 1861-0579
1801-0361 1861-0576 1861-0579
EXHAUST PART #
REPL. BAFFLE PART #
REDUCED DB BAFFLE PART #
31/2” SLIP-ONS (CONT)
1801-0362 1861-0576 1861-0579
1801-0363 1861-0576 1861-0579
1801-0364 1861-0576 1861-0579
1801-0365 1861-0577 1861-0580
PART # DESCRIPTION SUG. RETAIL
1861-0403 Repl. baffle 17/8” x 103/4” $29.95
1861-0404 Quiet Core baffle repl. 85/8” for 15” bodies 34.95
1861-0405 Repl. baffle 17/8” x 141/2” 29.95
1861-0406 Quiet Core baffle repl. 123/8” for 191/2” bodies 34.95
1861-0407 Repl. baffle 17/8” x 19” 29.95
1861-0408 Quiet Core baffle 163/4” for 24” bodies 34.95
1861-0575 Repl. baffle 2” x 15” 34.95
1861-0576 Repl. baffle 2” x 161/2” 34.95
1861-0577 Repl. baffle 2” x 231/2” 34.95
1861-0578 Reduced dB baffle 13/4” x 151/2” 34.95
1861-0579 Reduced dB baffle 13/4” x 17” 34.95
1861-0580 Reduced dB baffle 13/4” x 24” 34.95
BAFFLES•Replacement 10” baffles for Samson exhaust systems•Sold each•Made in the U.S.A.
NOTE: May not fit other styles of exhaust systems because of various wall thicknesses used.
EXHAUST PART #
REPL. BAFFLE PART #
QUIET CORE BAFFLE PART #
DRAGSTERS
1800-0199 1861-0405 -
1800-0411 1861-0405 -
1800-0198 1861-0405 -
1800-0807 1861-0405 -
1800-0200 1861-0405 -
1800-0412 1861-0405 -
SPEEDSTER XTRA LONGS
1800-0195 - 1861-0408
1800-0416 - 1861-0408
SPEEDSTER LONGS
1800-0027 1861-0407 1861-0408
1800-0415 1861-0407 1861-0408
1800-0028 1861-0407 1861-0408
1800-0809 1861-0407 1861-0408
EXHAUST PART #
REPL. BAFFLE PART #
QUIET CORE BAFFLE PART #
SPEEDSTER SHORTS
1800-0025 1861-0403 1861-0404
1800-0409 1861-0403 1861-0404
1800-0026 1861-0403 1861-0404
1800-0806 1861-0403 1861-0404
1800-0210 1861-0405 1861-0406
1800-0410 1861-0405 1861-0406
SPEEDSTER SLASH-DOWNS
1800-0087 1861-0403 1861-0404
1800-0413 1861-0403 1861-0404
1800-0088 1861-0403 1861-0404
1800-0808 1861-0403 1861-0404
1800-0212 1861-0403 1861-0404
1800-0414 1861-0403 1861-0404
1800-0761 1861-0405 1861-0406
REPLACEMENT/OPTIONAL BAFFLES•Available in standard replacement or Quiet Core (reduced dB cores)•Sold each
PART # DESCRIPTION SUG. RETAIL
DS-202154 13/4” o.d. x 11/2” i.d. for 17/8” pipes $39.95
DS-202169 17/8” o.d. x 13/4” i.d. for 2” pipes 39.95
DS-200030 21/8” o.d. x 13/4” i.d. for 21/4” pipes 39.95
DS-202187 15/8” o.d. x 11/2” i.d. for 13/4” pipes 39.95
DS-200029 21/8” o.d. x 2” i.d. for 21/4” pipes 39.95
DS-200492 23/8” o.d. x 13/4” i.d. for Samson Cannons, Long Cannons and Long Slashers for 02-06 V-Rod 39.95
DS-210630 21/8” o.d. x 13/4” i.d. x 37/8” baffle (ea.) for original Samson Big Guns 34.95
DS-210631 21/8” o.d. x 2” i.d. x 4” baffle (ea.) for original Samson Big Guns 34.95
DS-210631
DS-210630
DS-202154
DS-202169
DS-200030
DS-202187
DS-200029
BAFFLES ONLY
PRICE LIST
1860-0463
1860-0468
BAFFLE W/ PACKING
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
472
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
TORQUE CONES II•Machined from stainless steel•Feature a better venturi effect than the stamped versions•Offer correct back pressure for more horsepower•Fit most stock and aftermarket 13/4” exhaust systems•Sold in pairs•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
DS-200203 Torque Cones II $99.95
TORQUE CONES•High-temperature stainless steel cones have fully radiused edges for improved engine response, especially low-end torque
•Generate correct levels of backpressure for increased horsepower
•Fit most stock and aftermarket exhaust systems; fit 13/4”-2” i.d. exhaust pipes
•New Vortex design increases back pressure, improving torque and horsepower
•Smooths out the power curve for more consistent performance•Made in the U.S.A.
MIDWAY DRAG PIPE MOUNT CLAMPS•Heavy-gauge steel construction•Sold each
PART # DESCRIPTION SUG. RETAIL
DS-203014 13/4”, Dyna Glide only $11.95DS-203017 13/4”, FXR only 10.95DS-203016 2”, Dyna Glide only 10.95DS-203015 2”, FXR only 10.95
MIDWAY EXHAUST MOUNTING KIT•Relocates rear midway support clamp off rear pipe bend for improved mounting and appearance
•Chrome kit includes two 13/4” pipe clamps (one each for the rear and the front) and one mounting hanger bracket
•Fits Drag Specialties and other exhaust pipes
PART # DESCRIPTION SUG. RETAIL
DS-209970 For rubber-mount 84-94, 99 FXR and 91-05 Dyna Glide $16.95
PIPE HANGER•Used to mount 17/8” diameter pipe extensions that have no brackets
•Chrome finish•Sold each•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1860-0234 For L85-12 FLT/FLHT models $42.95
UNIVERSAL HEAVY-DUTY EXHAUST CLAMPS•Heavy-gauge flat steel clamps attach exhaust pipes to any frame-mounted bracket
•Include nuts and bolts; available in chrome
•Sold each•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
DS-203049 13/4” body clamp $19.95DS-203050 17/8” body clamp 19.95DS-203047 13/4” end clamp 19.95DS-203048 17/8” end clamp 19.95DS-203045 13/4” center clamp 19.95DS-203046 17/8” center clamp 19.95
STAINLESS STEEL EXHAUST CLAMPS•Barrel and band design provide for superior clamping pressure•Low profile hex head adjusting bolt•Holds up to the repeated heating and cooling of the exhaust system•Available in 10 sizes•Sold individually•Made in the U.S.A. PART # DESCRIPTION
STAINLESS STEEL T-BOLT CLAMPS•Keep it all together and clean with these heavy-gauge stainless steel clamps, the best in the business
•Stainless steel construction resists heat and rust•Sold each•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
OC-1 Offset bracket $6.95
EXHAUST OFFSET BRACKET•Chrome universal offset mounting bracket for exhaust pipes, mufflers, etc.
•Sold individually•Made in the U.S.A.
PART # DESCRIPTION SIZE SUG. RETAIL
DS-203060 Hanger 3” L $6.95DS-203070 Hanger 43/4” L 6.95DS-203080 L-bend hanger 1” x 33/4” 6.95
EXHAUST HANGER BRACKETS•Chromed 1/8” thick steel exhaust hangers•Available in assorted lengths and configurations•Sold individually
PART # DESCRIPTION SUG. RETAILFOR ALL 84-94, 99-00 FXR MODELSDS-200155 Front bracket; repl. OEM #65670-82B $16.95DS-200156 Rear bracket with spacer;
repl. OEM #s 65675-87 and 65802-90 17.95
CHROME FXR EXHAUST MOUNTING BRACKETS•Replacement chromed steel exhaust brackets•Available for front and rear applications; may also be used on other models
•Will work for custom frame applications and 90-92 FXD models•Rear bracket includes spacer (for 90-94 models only)
PART # DESCRIPTION SUG. RETAILFOR 84-94 FXST AND FLST (EXCEPT FLSTF AND FLSTN), 84-86 FXWG AND 85 FXSBDS-209931 Black; repl. OEM #65459-84A $73.95FOR 87-94 FXRDS-209927 Chrome; repl. OEM #65674-87 46.95FOR 95-13 DYNA GLIDE MODELSDS-209936 Chrome; repl. OEM #65674-95 43.951860-0391 Black 36.95FOR 91-94 DYNA GLIDE MODELSDS-209935 Black; repl. OEM #65674-90A 36.95
REPLACEMENT MUFFLER SUPPORTS•1” o.d. steel tubing available in black powder-coat or highly polished chrome
•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1861-0808 For 85-13 FLT/FLHT/FLHR/FLHX and FLTR models; repl. OEM #65724-85 $6.95
1861-0811 For 95-13 FLT/FLHT/FLHR/FLTR/FLHX w/ 4” round mufflers $39.95
MUFFLER BRACKET COVERS•Cover the welded muffler mounting brackets beneath the saddlebags with smooth chrome
•Stamped steel construction with a chrome finish•Sold in pairs
1861-0679
DS-203060 DS-203070
DS-203080
DS-209927
DS-209931
DS-209935
DS-209936
DS-200155DS-200156
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
EXHAUST FLANGE KIT•Kit includes two chrome flanges with retaining clips•Retaining rings can be purchased separately
PIPE ACCESSORIES•Made in the U.S.A.
EXHAUST STUDS•Sold in pack of six•Made in the U.S.A.
EXHAUST PORT FASTENER KIT•Never worry about re-tightening exhaust stud nuts again
•Kit’s lock nuts fasten onto OEM exhaust studs without damaging studs or flange
•No special tools needed for installation or removal•No thread locker required•Made in the U.S.A.
EXHAUST PORT STUDS AND NUTS•Kit includes four zinc-plated studs and four chrome-plated flanged nuts; replaces OEM #16715-83
•Made in the U.S.A.
MUFFLER PACKING•Heavy-duty 1,200°F muffler packing•11” x 16” x 1” thick•Can be split in half to allow for double use•Made in the U.S.A.
EXHAUST HEAT WRAP KITS•Fiberglass cloth for extreme heat insulation (2,000°)•Perfect for wrapping pipes or mufflers•Keeps the heat inside•Comes in 1” or 2” wide x 25’ rolls•Includes four 14” ball bearing and barb locking stainless steel ties; replacement ties sold separately (PART #1861-0670)
•Available in black or tan•Made in the U.S.A.
FIBERGLASS PACKING•Available in several sizes as listed
HEADER WRAP KIT•Kit features laser-cut Vance & Hines wrap clamps, black header wrap tape and locking stainless steel ties
•Black, fiberglass composite wrap tape helps lock in the heat and reduces the radiant heat a realistic 50%
•Kit includes 25’ roll of black wrap tape, 2 Vance & Hines Wrap Clamps and 6 locking stainless steel ties, enough to wrap two motorcycle headers thoroughly
•Made in the U.S.A.
IMPORTANT NOTICE: Use of this Vance & Hines Header Wrap Kit (PART #1861-0622) may void all warranties of the exhaust system that this Kit is applied to. Header Wrap functions to insulate heat generated by exhaust gases flowing through the head pipe, thereby raising the head pipe temperature beyond its intended operating temperature. Using heat wrap may compromise the integrity of the head pipe material, and may ultimately lead to cracks in the head pipe and will not be covered under warranty. Use of header wrap on an exhaust system is a modification to, and not a normal use of, an exhaust system. This notice is intended to inform the buyer to consider this possibility before using this product.
UNIVERSAL CORE REPACK KITS•High-grade fiberglass matting•Kit PART #1860-0198 includes 9” x 16” fiberglass matting; enough material to repack two baffle cores
•Kit PART #1860-0510 includes two 141/2” x 121/2” x 1/2” thick fiberglass mats and two 14” x 81/2” weaved thin mats
•Made in the U.S.A.
474
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAILFOR 84-13 BIG TWINS AND 86-13 XLDS-203097 Exhaust flange kit;
BP-1 Brake pedal stop for 86-E87 XL $6.95BK-74 12” mounting straps for Harley 74” w/ mtg. studs
(not for use w/ adjustable channel-mount pipes) (pr.) 19.95TB-2 Two-piece T-bolt set 5.95TB-4 Four-piece T-bolt set 11.95
PART # DESCRIPTION SUG. RETAIL
DS-197019 For all 84-13 Big Twin and 86-13 XL models; repl. OEM #16715-83 $9.95
PART # DESCRIPTION SUG. RETAIL
1860-0388 For 84-99 Evolution Big Twin models $12.95
PART # DESCRIPTION SUG. RETAIL
2401-0126 For 84-13 Big Twin, 86-13 XL $13.95
PART # DESCRIPTION SUG. RETAIL
1861-0696 Muffler packing $14.95
PART # DESCRIPTION SUG. RETAIL
1861-0666 1” tan $31.951861-0667 1” black 31.95
PART # DESCRIPTION SUG. RETAIL
1861-0668 2” tan $44.951861-0669 2” black 44.95
PART # DESCRIPTION SUG. RETAIL
V16106 Fiberglass repacking kit, 20” x 121/2” x 3/8” $14.95V16107 Fiberglass repacking kit, 12” x 9” x 3/8” 14.95V16108 Fiberglass repacking kit, 13” x 91/2” x 3/8” 14.95
PART # DESCRIPTION SUG. RETAIL
1861-0622 Black exhaust wrap kit $69.95
PART # DESCRIPTION SUG. RETAIL
1860-0198 Repack kit (9” x 16”) $32.951860-0510 Repack kit (141/2” x 121/2” and 14” x 81/2”) 30.95
V16106
V16107
DS-203097
BK-74BP-1
TB-2
1861-0666
1861-0667
1861-0668
1861-0669
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
TOURING
COVERS,SECURITY
& GENERAL
475
HIGH-TEMPERATURE EXHAUST WRAP KITS•Wraps will increase power and reduce radiated exhaust heat
•Kits includes 25’ L, 2” W or 50’ L, 1” W top-quality high-temperature wrap and four stainless-steel tie wraps for that finishing touch
•Wraps can withstand up to 2,000°•Available in black or tan•Replacement 4-pack exhaust wrap clamps are also available
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
PART # DESCRIPTION SUG. RETAIL
NATURAL
1861-0542 1” x 50’ w/ silver tie wraps $49.95
1861-0540 2” x 25’ w/ silver tie wraps 39.95
1861-0544 2” x 50’ 53.95
1861-0546 2” x 100’ 96.95
BLACK
1861-0818 1” x 50’ w/ black tie wraps 56.95
1861-0817 2” x 25’ w/ black tie wraps 46.95
1861-0541 1” x 50’ w/ silver tie wraps 57.95
1861-0539 2” x 25’ w/ silver tie wraps 45.95
1861-0543 2” x 50’ 61.95
1861-0545 2” x 100’ 112.95
PART # DESCRIPTION SUG. RETAIL
METALLIC
1861-0771 1” x 50’ w/ silver tie wraps $69.95
1861-0772 2” x 25’ w/ silver tie wraps 55.95
1861-0773 2” x 50’ 78.95
1861-0774 2” x 100’ 149.95
SILVER
1861-0778 1” x 50’ w/ silver tie wraps 71.95
1861-0775 2” x 25’ w/ silver tie wraps 68.95
1861-0776 2” x 50’ 92.95
1861-0777 2” x 100’ 182.95
EXHAUST PIPE WRAP•For maximum fuel burn or cosmetic upgrade•Withstands direct heat up to 2000°F•Available in several widths and lengths; 1” x 50’ and 2” x 25’ sizes include four silver or black tie wraps as listed
•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1861-0828 Exhaust wrap, 1” x 50’ $54.95
1861-0829 Exhaust wrap, 2” x 25’ 54.95
1861-0816 Mat, 12” x 24” 39.95
MATRIX HEAT SHIELD™ EXHAUST WRAPS•1” and 2” W rolls offer better heat resistance and a custom look you will not find with any other exhaust wrap
•Made from crushed volcanic rock; 25% stronger than a typical fiberglass wrap
•Weather and chemical resistant•Kit includes four stainless steel tie straps and detailed instructions
•The Matrix Heat Shield Mat is a unique self-adhesive heat shield with a carbon-fiber finish
PART # DESCRIPTIONSUG.
RETAIL
1861-0318 Black 2” x 25’ $62.95
1861-0729 Black 1” x 50’ 64.95
1861-0319 Tan 2” x 25’ 54.95
PART # DESCRIPTIONSUG.
RETAIL
1861-0730 Tan 1” x 50’ $59.95
1861-0320 Exhaust wrap clamps 19.95
PART # DESCRIPTION SUG. RETAIL
1861-0671 8” $9.95
PART # DESCRIPTION SUG. RETAIL
1861-0670 14” $11.95
STAINLESS STEEL CABLE TIES•Great for high-temperature areas•Ball bearing and barb fastening assembly
•Locks tightly and will not slip•Secure any place an extra strength tie is needed
•Comes in 8” or 14” lengths•Sold in pack of five•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1861-0672 1.25”-2.25” diameter $13.95
1861-0673 2.25”-3.25” diameter 13.95
STAINLESS STEEL WORM CLAMPS•Features a narrow design with a low profile head
•Secures exhaust heat wraps or can be used any place extra clamping is needed in extreme temps or conditions
•Comes in two sizes•Sold in packs of four•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
8 INCH, SILVER
1861-0547 4-pk. $7.95
1861-0549 50-pk. 1.95 (ea.)
14 INCH, SILVER
1861-0548 4-pk. 8.95
1861-0550 50-pk. 1.95 (ea.)
PART # DESCRIPTION SUG. RETAIL
8 INCH, BLACK
1861-0819 4-pk. $7.95
1861-0820 50-pk. 1.95 (ea.)
14 INCH, BLACK
1861-0821 4-pk. 8.95
1861-0822 50-pk. 2.95 (ea.)
PART # DESCRIPTION SUG. RETAIL
8 INCH, BLACK (LADDER STYLE)
1861-0823 4-pk. $10.95
1861-0824 50-pk. 2.95 (ea.)
14 INCH, BLACK (LADDER STYLE)
1861-0825 4-pk. 13.95
1861-0826 50-pk. 2.95 (ea.)
STAINLESS STEEL TIE WRAPS•For securing exhaust pipe wrap and cosmetic upgrades•Anti-slip ball bearing locking device•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1861-0451 For all OEM 18mm O2 sensors $69.95
O2 SENSOR COVERS•Chrome O
2 sensor covers
offer a unique, custom look•Designed to cover the plain 18mm OEM sensors
•Install easily with included hardware•Sold in pairs•Made in the U.S.A.
1861-0672 1861-0673
1861-0817
1861-0818
1861-0670
1861-0671
1861-0819 1861-0823
1861-0816
1861-0828
1861-0829
1861-0318
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
All part numbers in BLUE are new for 2013.
SECTION 6WINDSHIELDS
& FAIRINGS
HANDLEBARS,CONTROLS& MIRRORS
CABLES
BRAKES
TANKS & OIL FILTERS
DASHES & GAUGES
FRAMES, SUSPENSION & FENDERS
FOOTRESTS & LICENSE
PLATE FRAMES
WHEELS & AXLES
HARDWARE, CHEMICALS
& TOOLS
COVERS,SECURITY
& GENERAL
ELECTRICAL
LIGHTING
FUEL/AIR SYSTEMS
ENGINE
TRANSMISSION & DRIVELINE
GASKETS & SEALS
AUDIO & COMMUNICATION
LUGGAGE
SEATS & SISSY BARS
EXHAUST
TOURING
476
We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.
SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION.
O2 SENSOR BUNG, PLUG AND WASHER•Available as a kit or individually•Weld‑in O2 sensor bung allows installation of O2 sensors in most exhaust systems; 18mm x 1.5
•O2 sensor bung plug works with 18mm O2 sensor bungs; 18mm x 1.5•Aluminum bung plug washer fits any 18mm O2 sensor bung plug
PART # DESCRIPTION SUG. RETAIL
1861‑0728 O2 sensor bung, plug and washer kit $18.95
1861‑0523 Weld‑in O2 sensor bung 9.95
1861‑0522 O2 sensor bung plug 8.95
1860‑0545 Aluminum washer for O2 sensor plug 2.45
WELD‑ON EGT BUNG•Allows installation of exhaust gas temperature meter
•Sold each
PART # DESCRIPTION SUG. RETAIL
1861‑0525 EGT bushing $21.95
O2 SENSOR PORT PLUG KIT•Plugs SuperTrapp O2 sensor ports when using exhaust on earlier H‑D models that don’t require an O2 sensor
•Kit includes two 18 x 1.5mm plugs•Made in the U.S.A.O2 SENSOR
PORT PLUG KIT•Kit allows select pre‑closed‑loop H‑D models to run newer style exhaust systems equipped with O2 sensor ports
•Includes two zinc‑plated, plugs with sealing washers•Simply screw into nonessential sensor ports
PART # DESCRIPTION PRICE
1860‑0144 For all SuperTrapp exhaust w/ O2 sensor ports $32.95
PART # DESCRIPTION SUG. RETAIL
1861‑0464 Sensor port plug kit, 18mm x 1.5 $16.95
1861‑0607 Sensor port plug kit, 12mm x 1.25 16.95
WELD NUT FOR EXHAUST SENSOR AND HEX SOCKET PLUG•18 x 1.5mm weld nut for mounting wide‑band sensor on exhaust pipe
•18 x 1.5mm hex socket plug mates with 18 x 1.5mm weld nut; allows removing oxygen sensor
O2 SENSOR HARNESS EXTENSION AND BUNG ADAPTER•Now you can use 09 Dresser exhaust pipes on 10‑13 Dresser models
•Reduce the 18mm O2 bungs on 09 models to 12mm O2 bungs found on 10‑13 models
•Uses Namz simple Plug‑N‑Play wiring harness technology; no cutting or splicing required
•Made in the U.S.A.
PART # DESCRIPTION SUG, RETAIL
7806‑1563 18x1.5mm weld nut $5.95
7806‑1564 18x1.5mm hex socket plug 5.95
1861‑0831 18 x 1.5 mm stainless steel weld nut 8.95
1861‑0833 18 x 1.5mm stainless steel hex socket plug 8.95
1861‑0832 12 x 1.25mm hex socket plug 5.95
PART # DESCRIPTION SUG. RETAIL
1861‑0608 O2 extension harness $31.95
O2 SENSOR HARNESS EXTENSION AND BUNG ADAPTER•Allows the use of exhaust systems with 18mm O2 sensor bungs to be used with late model bikes with 12mm O2 sensors
•Reduces the 18mm O2 bungs to 12mm O2 bungs found on select 10‑13 models
•Wiring harness comes pre‑assembled with connector pins
•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1861‑0789 O2 extension harness $24.95
O2 SENSOR HARNESS EXTENSION•6” extension harness•Reduces the 18mm O2 bungs on 09 models to 12mm O2 bungs on 10‑13 models
•No cutting or splicing required•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1861‑0827 6” O2 extension harness $24.95
O2 PORT BUSHING ADAPTER•Threaded outer and inner adapters reduce O2 sensor port from 18mm to 12mm allowing riders to use our exhaust pipes on select newer‑model motorcycles
•Sold in pairs•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1861‑0784 O2 port bushing adaptors $11.95
O2 WELD‑IN SENSOR BUNGS•Used to install O2 sensors in exhaust systems•Weld‑in style•Available in 12 x 1.25mm or 18 x 1.5mm styles•Available in a standard straight style, or machined at a 45° angle•Sold in pairs•Made in the U.S.A.
PART # DESCRIPTIONSUG.
RETAIL
STRAIGHT
1861‑0560 18mm x 1.5 $14.95
1861‑0561 12mm x 1.25 14.95
PART # DESCRIPTIONSUG.
RETAIL
45° ANGLE
1861‑0694 18mm x 1.5 $24.95
1861‑0695 12mm x 1.25 24.95
O2 SENSOR PORT PLUGS•Allow non‑sensor HD models to run newer‑style exhaust systems equipped with O2 sensor ports
•Simply scew it into non‑essential sensor ports•Sold in pairs•Made in the U.S.A.
PART # DESCRIPTIONSUG.
RETAIL
1861‑0790 18mm x 1.5 $11.95
PART # DESCRIPTIONSUG.
RETAIL
1861‑0791 12mm x 1.25 $11.95
1861‑0790
7806‑15637806‑1564
1861‑0728
1861‑0464 1861‑0607
1861‑05601861‑0694
02 SENSOR BUNG ADAPTER KIT•Reduces 18mm bungs to 12mm for 10‑13model sensors
•Includes extension wire to allow the front sensor to reach the new installation location
•Kit includes two adapters, extension wire, wire connectors and instructions
PART # DESCRIPTION SUG. RETAIL
1861‑0594 O2 sensor bung adapter kit $21.95
O2 SENSOR PLUG•Works with any O2 sensor port fitting
•Two sizes available: 18 x 1.5mm or 12 x 1.25mm•Sold each•Made in the U.S.A.
PART # DESCRIPTION SUG. RETAIL
1861‑0496 18 x 1.5mm $4.95
PART # DESCRIPTION SUG. RETAIL
1861‑0562 12 x 1.25mm $4.95
1861‑0496
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
Commander un accessoire ou une pièce chez US Dream Import
Vous avez vu une pièce ou un accessoire : -1) Notez [Nom du catalogue] [Page du catalogue] [Référence article] et [Nom de l'article (en anglais ou en français)],-2) Envoyez-moi un E-Mail avec ces informations à [email protected] en précisant dans l'objet : "Date + Devis + [Référence article] + [Nom de l'article (en anglais ou en français)] et éventuellement votre numéro de téléphone de contact"
Un E-Mail vous sera adressé sous 24 h avec la disponibilité de l'article, le prix(*) livré chez vous et un lien de paiement direct,Vous n'avez plus qu'à procéder au règlement et la commande de votre accessoire sera effectuée immédiatement,
Et votre Accessoire sera chez vous dans 6 jours !
(*) Le prix du devis peut être inférieur au prix que vous avez vu,Exemple : votre accessoire est vendu 157,99 USD sur un eBook et est disponible à 103,99 USD sur un autre FlipBook de US Dream Import - Le devisenvoyé sera toujours au meilleur prix disponible !
(*) Par un procédé de croisement des références disponibles,Pour information les prix indiqués sur les catalogues US sont toujours HT et compte tenu des frais de transport par avion, pour 103,99 USD sur un catalogue US vous payerez environ le même montant HT, soit 105,00 Euros (HT) + TVA (20%) + Tarif poste en France,
US Dream Import spécialiste importation de pièces et accessoires
Accessoires et Pièces Harley-Davidson Importés par US Dream Import en France Site : http://www.usdream.fr/ Hotline : +33(0)6 60 06 46 59 E-Mail : [email protected]
US Dream Import France (http://www.usdream.fr/)
accessoire_us_paypal
US Dream Import France (http://www.usdream.fr/)
Zone de texte
NOUVEAU : Special Up Date 2013 FatBook Drag Specialties Harley-Davidson CLIQUEZ ICI Pièces et Accessoires dédié Harley-Davidson Importés par US Dream Import en France