Access Control | DIN-Rail Power Supply/Chargers Overview Available in 3A or 7A output voltages, Stanley’s DIN Rail power supply/charger products provide the industry leading performance necessary to meet the security and access control hardware requirements of the Stanley PAC platform. DIN-Rail mounting provides consistent, easy and quick installation of the power supply, which is simply snapped into place on the rails in either the DIN4 or DIN6 lockable metal enclosures. With no tools required, installation on a DIN rail takes seconds and reducing installation time. Both units contains a built-in charger, this means that when installed with the appropriate battery(s), the power supply will continue to provide 12V or 24V DC for an extended period in the event of a power outage. The exact duration of the backup period will be dependent on the power consumption of the access control system and the capacity of the battery. Key Features- Output voltage switchable between 12 or 24VDC 7S-PSU3, selectable 12VDC @ 3A or 24VDC @ 1.5A 7S-PSU7, selectable 12VDC @ 7A or 24VDC @ 3.5A Filtered and electronically regulated outputs Fully protected against overload, short circuit and reverse battery Built-in charger for sealed lead acid or gel type batteries Automatic switch over to stand-by battery when AC fails Filtered and electronically regulated outputs Low battery supervision Load shed prevents batteries from deep discharge Thermal overload protection DIN-Rail mount
2
Embed
Access Control DIN-Rail Power Supply/Chargers - … Library/Accessories/Stanley... · Access Control| DIN-Rail Power Supply/Chargers Overview Available in 3A or 7A output voltages,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Access Control | DIN-Rail Power Supply/Chargers
Overview
Available in 3A or 7A output voltages, Stanley’s DIN Rail power supply/charger products provide the industry leading performance necessary to meet the security andaccess control hardware requirements of the Stanley PAC platform.
DIN-Rail mounting provides consistent, easy and quick installation of the power supply, which is simply snapped into place on the rails in either the DIN4 or DIN6lockable metal enclosures. With no tools required, installation on a DIN rail takes seconds and reducing installation time.
Both units contains a built-in charger, this means that when installed with the appropriate battery(s), the power supply will continue to provide 12V or 24V DC for anextended period in the event of a power outage. The exact duration of the backup period will be dependent on the power consumption of the access control systemand the capacity of the battery.
Key Features -
Output voltage switchable between 12 or 24VDC
7S-PSU3, selectable 12VDC @ 3A or 24VDC @ 1.5A
7S-PSU7, selectable 12VDC @ 7A or 24VDC @ 3.5A
Filtered and electronically regulated outputs
Fully protected against overload, short circuit and reverse battery
Built-in charger for sealed lead acid or gel type batteries
Automatic switch over to stand-by battery when AC fails
Filtered and electronically regulated outputs
Low battery supervision
Load shed prevents batteries from deep discharge
Thermal overload protection
DIN-Rail mount
READYKEY™
COMPATIBLE
Visit us at...
FEATURES AND SPECIFICATIONS CHART
Stanley DIN-Rail Power Supplies
Description Power Supply/Charger
Dimensions 6.93 in. x 3.54 in. x 1.77 in.
AC Input 90V - 264VAC
Selectable Output 7S-PSU3 Selectable at 13.8VDC @ 3A or 27.6VDC @ 1.5A7S-PSU7 Selectable at 13.8VDC @ 7A or 27.6VDC @ 3.5A
Multifunction Green StatusLED
Off: No mains power.Flashing: AC power connected, no battery.
Steady: AC and battery connected.
AC Status (MSTAT) Used to determine if AC Power or thebackup battery is being utilized.
Ambient Temperature 122°F
Housing Material/Mounting Steel/DIN-Rail Plate
Approvals UL Listed. CE-mark
Warranty 5-Year Limited Warranty
Ordering InformationStanley PAC Part Number
7S-PSU3 - 12/24VDC 3A DIN-Rail Power Supply7S-PSU7 - 12/24VDC 7A DIN-Rail Power Supply
7S-DIN4X STANLEY 4-WAY DIN-RAIL ENCLOSURE 7S-DIN6X STANLEY 6-WAY DIN-RAIL ENCLOSURE
PAC512IP TWO-DOOR CONTROLLER IN ENCLOSUREWITH A PRE-WIRED 3A 12/24 POWER SUPPLY
Stanley’s DIN-Rail solutions enable you to mix and match various combinations of DINrail-mounted modules — Two-Door Controllers, Access and Alarm Servers, Input andOutput Controllers and power supplies to meet a building’s security needs.
The 3A PSU is also available pre-wired and mounted in a lockable metal enclosure, withboth PAC 512 and iPAC-series Two-Door Controllers.