a_burners.pdf

8/11/2019 a_burners.pdf

1/37

INDEX


2/37

LOW CAPACITY

GASOIL BURNERS

AVERAGE CAPACITY

GASOIL BURNERS

INDUSTRIAL

GASOIL BURNERS

LOW NOx

GAS BURNERS

SEMI-PRESSURIZED

GAS BURNERS

PRESSURIZED AVERAGE CAPACITY

& INDUSTRIAL GAS BURNERS

HEAVY OIL BURNERS

DUAL FUEL MIX BURNERS

3

a 3

a 8

a 10

a 14

a 20

a 22

a 28

a 30


3/37

LOW CAPACITY GASOIL BURNERS JOILLOW CAPACITY GASOIL BURNERS JOIL

The light oil burner JOIL becomes a part

and integrates the line dedicated to low

capacities.

Faithful to Joannes care in the safeguard of

the environment, JOIL burners have a com-

bustion head whose particular shapegua-

rantees low emission of CO and NOx.

The reduced dimensions and the optimal

positioning of the components makes the

coupling of JOIL burners to modern heat

generators and maintenance

operations very easy.

This line consists of seven models;

three are equipped with pre-heater

on the combustion head.

Their thermal power is included

between 35,6 and 106,7 kW.

a 3

TECHNICAL DATA JOIL 3 JOIL 3 R JOIL 4 JOIL 4 R JOIL 6 JOIL 6 R JOIL 9

Code 9225005000 9225004000 9225007000 9225006000 9225010000 9225009000 9225017000

Capacity (min - max) kW 16,6 - 35,6 14,2 - 35,6 16,6 - 47,4 14,2 - 47,4 28,5 65,2 28,5 65,2 55,7 - 106,7kcal/h 14.280 - 30.600 12.240 - 30.600 14.280 -40.800 12.240 -40.800 24.480 - 56.100 24.480 - 56.100 47.940 - 61.800

Fuelconsumption (min -max) Kg/h 1,4 - 3,0 1,2 - 3,0 1,2 - 4,0 1,2 - 4,0 2,4 - 5,0 2,4 - 5,5 4,7 - 9,0

Motor W 100 100 100 100 100 100 100

Pre-heater W - 110 - 110 - 110 -

Single-phase power supply V/Hz 230/50 230/50 230/50 230/50 230/50 230/50 230/50

WEIGHTS AND DIMENSIONS JOIL 3 JOIL 3 R JOIL 4 JOIL 4 R JOIL 6 JOIL 6 R JOIL 9

A / B/ C mm 290x260x270 290x260x270 290x260x270 290x260x270 290x260x270 290x260x270 330x260x270

E /F mm 100x180 100x180 100x180 100x180 100x180 100x180 140x180

G mm 90 90 90 90 90 90 100

L mm 105 105 105 105 105 105 105

H / I mm 140/180 140/180 140/180 140/180 140/180 140/180 140/180

Y mm M 8 M 8 M 8 M 8 M 8 M 8 M 8

Packing dimensions mm 325x325 325x325 325x325 325x325 325x325 325x325 325x325x380 x380 x380 x380 x380 x380 x380

Weight Kg 8,5 8,6 8,5 8,6 8,5 8,6 9,0


4/37

LOW CAPACITY GASOIL BURNERS AZ PR

SINGLE STAGE MODELS WITH PRE-HEATING


CONSTRUCTION CHARACTERISTICS

The air shutter automatically closes when the burnerstops and this forbids cold air flow in the boiler. Thismeans energy saving for the user.

A new conception of scroll and conveyor profilesguarantees high pressure values of combustion air;the burner is therefore fit for work on any kind ofheat generator, even with semi-pressurised combu-stion chamber.

Easy and precise adjustment of combustion, thanksto the particular structure of the combustion headand of the deflecting disk, adjustable by a tool evenwhen the burner is working.

This permits to optimise the combustion parametersin the most critical working conditions.

The easy access micrometric screw device permits asteady and precise air adjustment.The high fan prevalence, the air adjustment on thedeflecting disk, the high blending speed permit asafe ignition and a stable burner working.

The conformation of the hydraulic circuit permitsthe immediate and total fuel interception whene-verthe burner stops.The innovating features and the particular structureof the combustion head assure a high combustionefficiency at the start and during the working.

A universal flange permits to install the burner onto

the boiler by only one screw. A self-protected,external multi pin plug allows easy and quick elec-trical connections; the plug disconnection permits tooperate safely on the burner. A locking device posi-tions the fuel flexible pipes in the right seat, preser-ving them from any possible damage.

The external air inlet makes the burner exceptio-nally noiseless even at peak working.

The die cast aluminium body, the combustion headand the stainless steel deflecting disk, the compo-nents quality, the high manufacture standard, the

severe production tests guaranteethe burner high reliability.

EASY ACCESS

the cover is removable to make the burnermaintenance easier;

the component cover can be removed in caseof total overhaul;

a hanging device permits to work easilyon the burner.

Continual research to optimise

combustion performance and bring down

the polluting emissions has brought aboutthe development of the AZ PR range,

a series of single stage burners

with potential ranging between

14.2 and 53.4 kW.

The five AZ PR models

are equipped with fuel pre-heater.

The above graph is the tested performance of the burnersaccording to national and international standards.

The max effective output of the burner is in relationto the heat generators furnacecounterpression.

a 4


5/37

(1) Burner with diesel oil pre-heating device for operationwith low flow rates.

(2) Burners provided with special boiler coupling flange,sliding to make easier the positioning of the fire mouthin the combustion chamber.

(3) Burners with automatic closing of the air gate.

/L : Burner with long intake port.

a 5

TECHNICAL DATA AZ 2.9 PR AZ 2.9 PR/L AZ 3 PR AZ 3 PR/L AZ 4 PR

Code 9211004116 9218004116 9205003116 9215003116 9205004116

Capacity (min - max) kW 14,2 - 35,6 14,2 - 35,6 14,2 - 35,6 14,2 - 35,6 21,3 - 53,4kcal/hx103 12,2 - 30,6 12,2 - 30,6 12,2 - 30,6 12,2 - 30,6 18,3 - 45,9

Fuel conssumption (min - max) kg/h 1,2 - 3,0 1,2 - 3,0 1,2 - 3,0 1,2 - 3,0 1,8 - 4,5Nozzle (min - max) GPH 0,30 - 0,85 0,30 - 0,85 0,30 - 0,85 0,30 - 0,85 0,60 - 1,25

Pressione pompa bar 12 12 12 12 12

Power supply V - Hz 230 - 50 230 - 50 230 - 50 230 - 50 230 - 50monophase monophase monophase monophase monophase

Motor W 100 100 100 100 100

Condenser F 4 4 4 4 4

Ignition transformer kV - mA 8 - 20 8 - 20 8 - 20 8 - 20 8 - 20

Air shutter manual adj. manual adj. manual adj. manual adj. manual adj.completely closed completely closed completely closed completely closed completely closed

WEIGHTS AND DIMENSIONS AZ 2.9 PR AZ 2.9 PR/L AZ 3 PR AZ 3 PR/L AZ 4 PR

A mm 320 370 320 370 448

B mm 90 140 90 140 120

Packing imensions mm 450 x 340 450 x 340 450 x 340 450 x 340 515 X 290x 310 x 310 x 310 x 310 x 370

Weight Kg 11,2 11,5 11,2 11,5 12,5

LOW CAPACITY GASOIL BURNERS AZ PRSINGLE STAGE MODELS WITH PRE-HEATING (1, 2, 3)



6/37


7/37

a 7

LOW CAPACITY GASOIL BURNERS AZ

SINGLE AND TWO STAGES

LOW CAPACITY GASOIL BURNERS AZ

(3) Burners with automatic closing of the air gate. /L : Burner with long intake port.

/2 : Two stages models

(1) Reduced power version.

(2) Burners fitted with special boiler coupling f lange,sliding to make easier the positioning of the fire mouthin the combustion chamber.

SINGLE STAGE MODELS TWO STAGES MODELS

AZ2.9 AZ2.9/L AZ3 AZ3/L AZ 4 AZ 8 AZ 10 AZ 14 AZ 14/LP AZ 20 AZ 20/L AZ 7/2 AZ 14/2 AZ 14/2 LP AZ 20/2 AZ 20/2 L

TECHNICAL DATA (3) (2-3) (2-3) (2-3) (2-3) (2-3) (2) (2-3) (2-3) (2-3) (2-3) (1-2-3) (1-2-3) (1-2-3) (1-2-3) (1-2-3)

Code 9211005116 9218005116 9205005116 9215005116 9205006116 9205012116 9205019116 9205022116 9215022116 9205030116 9215030116 9211014126 9205022126 9215022126 9205030126 9215030126

Capacity (min - max) kW 1 6,6-35 ,6 1 6,6-35 ,6 2 1,3-35 ,6 2 1,3-35 ,6 2 1,3-53 ,4 3 5,6-10 0,8 5 9,3-12 4,5 8 3,0-17 5,5 8 3,0-17 5,5 1 28 ,0 -2 49 ,0 1 28 ,0 -2 49 ,0 4 7,4-86 ,6 8 3,0-17 5,5 8 3,0-17 5,5 1 18 ,6 -2 37,3 1 18,6-23 7,3kcal/hx103 1 4,3-30 ,6 1 4,3-30 ,6 1 8,3-30 ,6 1 8,3-30 ,6 1 8,3-45 ,9 30 ,6 -8 6,7 5 1,0-10 7,1 7 1,4-15 0,9 7 1,4-15 0,9 1 10 ,1 -2 14 ,2 1 10 ,1 -2 14 ,2 4 0,8-74 ,5 7 1,4-15 0,9 7 1,4-15 0,9 1 02 ,0 -2 04,0 1 02,0-20 4,0

Fuel consumption (mi n - max) kg/h 1,4 -3,0 1,4 -3,0 1, 8 - 3,0 1, 8 - 3,0 1, 8 - 4,5 3,0 - 8,5 5, 0 - 10, 5 7, 0 - 14,8 7, 0 - 14,8 10, 8 - 21, 0 10,8 - 21,0 4,0 - 7,3 7,0 - 14,8 7, 0 - 14, 8 10,0 - 20, 0 10,0 - 20,0

Nozzle (min - max) GPH 0,4- 0,75 0,4- 0,75 0,5- 0,75 0,5- 0,75 0,5- 1,1 0,75- 2,0 1,25- 2,5 1,75 - 3,5 1,75- 3,5 2,5- 5,0 2,5 - 5,0 0,85- 1,5 1,75 - 3,0 1,75 - 3,0 2,25 - 4,0 2,25 - 4,0

Pump pressure bar 12 12 12 12 12 12 12 12 12 12 12 10-18 10-18 10-18 10-18 10-18

Power supply V - Hz 230 - 50 230 - 50 230 - 50 230 - 50 230 - 50 230 - 50 230 - 50 230 - 50 230 - 50 230 - 50 230 - 50 230 - 50 230 - 50 230 - 50 230 - 50 230 - 50monoph. monoph. monoph. monoph. monoph. monoph. monoph. monoph. monoph. monoph. monoph. monoph. monoph. monoph. monoph. monoph.

Motor W 100 100 100 100 100 100 100 185 185 185 185 100 185 185 185 185

Condenser F 4 4 4 4 4 4 4 5 5 5 5 4 5 5 5 5

Ignition transformer kV - mA 8 - 20 8 - 20 8 - 20 8 - 20 8 - 20 8 - 20 8 - 20 10 - 30 10 - 30 10 - 30 10 - 30 10 - 20 10 - 30 10 - 30 10 - 30 10 - 30

Air shuttle man ual ad j. man ua l ad j. man ua l ad j. man ua l ad j. man ua l ad j. man ua l ad j. man ua l ad j. man ua l ad j. man ua l ad j. man ua l adj . man ua l ad j. adj us tmen t adj us tmen t adj us tmen t adj us tmen t adj us tmen tcompletely completely completely completely completely completely completely completely completely completely by by by by by

closed closed closed closed closed closed closed closed closed closed servomotor servomotor servomotor servomotor servomotor


WEIGHTS AND DIMENSIONS AZ2.9 AZ2.9/L AZ3 AZ3/L AZ 4 AZ 8 AZ 10 AZ 14 AZ 14/LP AZ 20 AZ 20/L AZ 7/2 AZ 14/2 AZ 14/2 LP AZ 20/2 AZ 20/2 L

A / B mm 320 - 250 370 - 250 323 - 294 393 - 294 448 - 210 465 - 230 483 - 230 525 - 275 685 - 275 535 - 275 700 - 275 410 - 280 525 - 275 685 - 275 535 - 275 700 - 275

C mm 215 215 218,5 218,5 265 285 285 340 340 340 340 247 340 340 340 340

D / E mm 230 - 90 230 - 140 236 - 87 236 - 157 328 - 120 345 - 120 358 - 125 400 - 125 400 - 285 400 - 135 400 - 300 270 - 140 400 - 125 400 - 285 400 - 135 400 - 300

F / G mm 160 - 80 160 - 80 167,5 - 80 167,5 - 80 212 - 80 232 - 89 232 - 114 274 - 114 274 - 114 274 - 114 274 - 114 195 - 90 274 - 114 274 - 114 274 - 114 274 - 114

H mm 135-160 135-160 85-140 85-140 85-140 90-140 110-150 110-150 110-150 110-150 110-150 140-180 110-150 110-150 110-150 110-150

L mm 85 85 85 85 85 95 120 120 120 120 120 95 120 120 120 120

N mm -- -- 160 160 160 160 180 180 180 180 180 -- 180 180 180 180

Packing dimensions mm 450x340 450x340 450x355 450x355 515x294 555x290 555x290 640x345 760x360 350x650 360x760 440x310 640x345 760x360 760x360 760x360x 310 x 310 x 270 x 270 x 370 x 370 x 370 x 400 x 440 x 420 x 440 x 290 x 400 x 440 x 440 x 440

Weight Kg 11,0 11,3 10,0 10,0 12,0 13,0 13,5 14,5 17,0 14,5 19,0 13,5 16,0 18,5 17,0 19,0


8/37

a 8

AVERAGE CAPACITY GASOIL BURNERS



The range of medium-capacity

oil burners includes two single-stage

models and four two-stage models,with power output ranging

from 118.6 to 776.3 kW.


Die cast aluminium body.

Patented device to increase the static pressureof the fan (only for models G50 and G70 OIL).

Combustion air intake provided with sound insula-tion to achieve a maximum comfort noise level, 72dB (A), according to the power class of the burners.

Sliding flange to get the maximum adaptability onany kind of heat generator.

Easy maintenance thanks to the possibility to pullout the whole the combustion head from the back

side without disconnecting the burner from theheat generator or from the fuel feed pipeline.

Easy survey of the fan thanks to the rear access.

Internal electric connections provided with fastcouplings to make the eventual replacement offaulty components easy.

In compliance with the EEC standards such as:Regulations concerning the Low Tension (EEC 73/23);Regulations concerning the ElectromagneticCompatibily (EEC 89/336); Regulations concerning

the Machines (EEC89/392).




9/37

a 9




G 35 OIL, G 35/2 OIL


TECHNICAL DATA G 22 OIL G 35 OIL G 22/2 OIL G 35/2 OIL G 40/2 OIL G 50/2 OIL G 70/2 OIL

Code 9211031116 9264040110 9211031126 9264040120 9264045120 9264050120 9264070120

Capacity (min -max) kW 136,4 - 260,9 190,0 - 356,0 118,6 - 272,7 142,0 - 356,0 267,0 - 474,0 177,0 - 585,0 196,7 - 776,3kcal/h x103 117,3 - 224,4 163,0 - 306,0 101,9 - 234,6 122,4 - 306,0 229,0 - 408,0 152,3 - 503,2 169,1 - 667,6

Fuel consumption (min-max) 1 stadio kg/h 11,5 - 22 16,0 - 30,0 10,0 - 12,5 12,0 - 17,0 22,5 - 25,0 15,0 - 29,0 16,5 - 40,5( 2 stadio kg/h -- -- 2,0 - 10,5 2,0 - 13,0 4,0 - 15,0 6,5 - 20,0 10,5 - 24,5

Power supply V - Hz 230 - 50 230 - 50 230 - 50 230 - 50 230/400 - 50 230/400 - 50 230/400 - 50monophasic monophasic monophasic monophasic triphasic triphasic triphasic

Motor (2.800 rev./min) W 250 370 250 370 550 1.100 1.500

Condenser F 8 14 8 14 -- -- --

Total capacity absorbed W 600 850 650 900 950 1.500 1.900

Ignition transformer kW - mA 10 - 20 12 - 35 10 - 20 12 - 35 12 - 35 -- 12 - 35

Air shutter manual adj. manual adj. adjustment adjustment adjustment adjustment adjustmentcompletely closed completely closed by servomotor by servomotor by servomotor by servomotor by servomotor


WEIGHTS AND DIMENSIONS G 22 OIL G 35 OIL G 22/2 OIL G 35/2 OIL G 40/2 OIL G 50/2 OIL G 70/2 OIL

A - B mm 576 - 360 790 - 420 676 - 360 790 - 420 703 (803) - 540 1.040 - 420 1.080 - 420

C mm 356 423 356 423 392 490 490

D - E mm 320 - 256 460 - 330 320 - 356 460 - 330 540 - 163 (328) 655 - 385 695 - 385

F / G mm 275 - 120 350 - 135 275 - 120 350 - 135 395 - 140 392 - 140 392 - 170

H mm 170 - 225 120 - 160 170 - 225 120 - 160 150 120 - 160 160 - 200

L mm 135 150 135 150 160 150 180

N mm -- 200 -- 200 200 200 230

X inch 1/4 - 3/8 3/8 1/4 - 3/8 3/8 3/8 3/8 3/8

Packing dimensions mm 760 x 440 x 400 500 x 520 x 970 760 x 440 x 400 500 x 520 x 970 500 x 700 x 1.200 500 x 700 x 1.200 500 x 700 x 1.200

Weight kg 20,0 26,5 20,0 27,0 55,0 55,0 59,0


10/37

a 10

AVERAGE AND HIGH CAPACITY GASOIL BURNERS

THREE STAGES MODELS


TECHNICAL DATA

Fixed combustion head with mobile minimumadjustment ring, with stainless steel nozzle and steelflame disk.

High pressure mechanical pulverising of the fuel bymeans of nozzles on a fixed pipe section.

Possibility to inspect combustion head.Photoresistance flame presence control.

Diagnostics controlled by equipment fitted withrelease button.

Automatic adjustment of comburent air flow by

automatic closing shutter electrically servo-control-led and tuning by hand with micrometric screw

Three-phase electric motor with 230/400 V - 50Hzpower supply, power from 750 to 1100 W

Terminal board for electric supply and burner ther-mostat and to control the second and third functio-ning stages Shockproof electric panel.

Self-suction fuel pump with pressure regulator andfuel on-off valve.

Centrifugal fan for high performances. Fuel pumpfilter.

Electrical protection class: IP44.

The JNS LO 600 and 1000 burners are in conformitywith: Low Voltage Directive 73/23/EEC-2006/95/EC Electromagnetic Compatibility Directive89/336/EEC-2004/108/EC.

ACCESSORIES SUPPLIED

Flanges Kit to fasten burner to boiler, complete withinsulating seal, flexible tubes, nozzles.



The new air-blown diesel burners

of the JNS LO line have three-stage

functioning and are available

with two thermal powers,

105-546 and 192-924 kW respectively.


11/37

a 11


THREE STAGES MODELS


TECHNICAL DATA JNS LO 600 JNS LO 1000

Code ............ ............

Capacity (min - max) kW 105,0 - 546,0 192,0 - 924,0

kcal/h x103 ...... ......

Fuel consumption (1) (min-max) kg/h 8,8 - 15,9 16,1 - 77,6

Power supply V - Hz 230/400 - 50 230/400 - 50triphasic triphasic

Motor W 750 1.100

Ignition transformer kW - mA 15- 48 15 - 48

Weight (only body) kg 32,0 32,5

(1) Fuel max viscosity : 1,5 E = 6 cST = 41 sec. RI.


12/37

a 12

INDUSTRIAL GASOIL BURNERS

TWO STAGES AND PROGRESSIVES MODULATED TWO STAGES


These burners have been designed to be fitted

to high-output boilers with pressurized

or negative pressure combustion chamber.

They are very high performance burners which respond

to the high standard operating requirements

and reliability expected by Joannes customers.

All models in the range conform to

the European regulations in force

and are equipped with long, adjustable

draught tube and stainless steel

heat-resistant combustion head terminal

ACCESSORIES SUPPLIED

2 flexible tubes, nozzles, nozzle wrenches, multiple plugsfor electrical wiring, boiler insulating seals, user and main-

tenance handbooks.


Stabilized ventilation with a fan flow-rate/pressure curvethat guarantees a reserve of pressure especially usefulduring peak start-up and where there is highback-pressure in the combustion chamber.

Structure and precision of the mixing head providing auniform air distribution and high combustion efficiencywith reduced CO and NOx emissions.

Combustion head can be adjusted, by means of 2 knobs,even when burner is on.

Universal-holed sliding flange for easy on-boiler installa-tion, cleaning and maintenance.

Tough control panel cabinet for protection of electricalcomponents.




13/37

a 13


TWO STAGES AND PROGRESSIVES MODULATED TWO STAGES


(2) The modulating operation is obtained byfitting the burners with suitable accessories,listed in details at the end of this chapter.

TWO STAGES MODELS PROGRESSIVES MODULATED TWO STAGES MODELS (2)

TECHNICAL DATA GPN 70/2 GPN 120/2 GPN 160/2 GPN 190/2 GPN 260/2 GPN 310/2 GPN 120/M GPN 160/M GPN 190/M GPN 260/M GPN 310/M

Code 9269070120 9269110120 9269150120 9269180120 9269250120 9269300120 9269110200 9269150200 9269180200 9269250200 9269300200

Capacity (min - max) kW 237,2 - 890,0 415,1 - 1 .364,0 711,6 - 1 .779,0 711,6 - 2 .135,0 949,0 - 2 .965,0 1.186,0 - 3 .558,0 533,7 - 1 .304,6 711,6 - 1 .779,0 711,6- 2 .134,8 1.067,4 - 2 .965,0 1.423,2 - 3 .558,0

kcal/h x103 204 ,0- 765,4 357,0 - 1 .173,0 612,0 - 1 .530,0 612,0 - 1 .836,0 816,0 - 2 .550,0 1.020,0 - 3 .060,0 459,0 - 1 .122,0 612,0 - 1 .530,0 612,0 - 1 .836,0 918 ,0- 2 .550,0 1.224 ,0- 3 .060,0

Fuel consumption (1) (min-max) kg/h 20 - 75 35 - 115 60 - 150 60 - 180 80 - 250 100 - 300 45 - 110 60 - 150 60 - 180 90 - 250 120 - 300

Power supply V - Hz 230/400 - 50 230/400 - 50 230/400 - 50 230/400 - 50 230/400 - 50 230/400 - 50 230/400 - 50 230/400 - 50 230/400 - 50 230/400 - 50 230/400 - 50triphasic triphasic triphasic triphasic triphasic triphasic triphasic triphasic triphasic triphasic triphasic

Motor (2800 rev./min) W 740 1.500 2.500 4.800 7.500 7.500 1.850 3.000 4.800 7.500 7.500

Total capacity absorbed W 1.650 2.350 3.350 5.800 8.500 8.500 2.560 3.900 5.800 8.500 8.500

Ignition transformer kW - mA 10 - 30 10 - 30 10 - 30 13 - 35 13 - 35 13 - 35 10 - 30 10 - 30 13 - 35 13 - 35 13 - 35

(1) Fuel max viscosity: 1,5 E = 6 cST = 41 sec. RI

TWO STAGES MODELS PROGRESSIVES MODULATED TWO STAGES MODELS (2)

WEIGHTS AND DIMENSIONS GPN 70/2 GPN 120/2 GPN 160/2 GPN 190/2 GPN 260/2 GPN 310/2 GPN 120/M GPN 160/M GPN 190/M GPN 260/M GPN 310/M

A mm 1.230 1.270 1.350 1.640 1.700 1.700 1.270 1.400 1.640 1.700 1.700

B mm 520 595 650 870 860 860 620 670 870 860 860

C mm 465 465 465 700 700 700 535 535 700 700 700

E mm 150 - 410 200 - 440 200 - 440 200 - 520 250 - 600 250 - 600 200 - 440 200 - 440 200 - 520 250 - 600 250 - 600

G mm 170 195 220 246 304 316 195 220 246 304 316

L mm 180 210 235 260 320 320 210 235 260 320 320

H mm 225 - 280 283 318 332 380 - 440 380 - 440 283 318 332 380 - 440 380 - 440

Y M 14 M 14 M 14 M 16 M 16 M 16 M 14 M 14 M 16 M 16 M 16

Packing dimensions mm 1.400 x 1.400 x 1.400 x 1.700 x 1,700 x 1.700 x 1.400 x 1.400 x 1.700 x 1,700 x 1.700 x700 x 540 710 x 560 710 x 560 920 x 900 920 x 900 920 x 900 710 x 560 710 x 560 920 x 900 920 x 900 920 x 900

Weight kg 71,0 76,0 85,0 200,0 295,0 330,0 84,0 93,0 200,0 295,0 330,0


14/37

a 14

LOW CAPACITY GAS BURNERS WITH LOW NOx

SINGLE STAGE MODELS COMPLETE WITH CE GAS TRAIN


The JM LN series single stage gas burners

have been designed for application

on high performance pressurised boilers

and are available in 9 models

with thermal power between 41 and 190 kW.

The very low NOx emissions

(class 3, 80 mg/kWh) are obtained

by means of a special combustion head.

They have very compact overall dimensions and low noise

pressure, and can operate with methane gas or LPG

The combustion head is adjustable, equipped with a gas

ramp complete with stabiliser, double valve and filter.

The combustion air regulator is located inside the burner

( models JM 4 LN and JM 7 LN) or externally (models JM 13

LN, JM 21 LN and JM 30 LN).

Combustion is optimised by the uniform air distribution.

All the JM LN burners have an air shutter that closes byforce of gravity at stoppage and a stabilised ventilation

system.

Installation and maintenance operations are facilitated by

the user-friendly arrangement of components and mobile

flanges with universal drillings (sliding for models JM 13

LN and JM 21 LN).

Upon request there are accessories kits and valve seal con-

trol kits available.




15/37

a 15


SINGLE STAGE MODELS COMPLETE WITH CE GAS TRAIN


(1) Minimum gas pressure to obtain maximumburner power. (2) Maximum operating pressure of gas valves.

(*) Specific quotes for versions with standard nozzles.(**) Specific quotes for versions with long nozzles.

TECHNICAL DATA JM 4 LN-10 JM 4 LN-15 JM 7 LN-15 JM 7 LN-20 JM 13 LN-20 JM 21 LN-20 JM 21 LN-25 JM 30 LN-25 JM 30 LN-32

Code 9 383002110 9383003110 9383006110 9383007110 9383012110 9383016110 9383017110 9383021110 9383022110

Capaciiity (min - max) kW 27,0 41,0 27,0 41,0 40,0 65,0 40,0 65,0 75,0 120,0 85,0 150,0 85,0 150,0 93,0 190,0 93,0 190,0

Fuel consumption (min - max) m3/h 2,9 4,3 2,9 4,3 4,2 6,9 4,2 6,9 8,0 12,7 9,0 16,0 9,0 16,0 9,8 20,0 9,8 30,0

Gas system / Gas train connections 1/2 - 1/2 1/2 - 1/2 1/2 - 1/2 3/4 - 3/4 3/4 - 3/4 1/2 - - 3/4 3/4 - 1 1 - 1 1 1/4 - 1 1/4

Min. pressure (1) (natural gas) mbar -- 20 -- 25 15 -- 16 -- 20

Max pressure (2) mbar 360 65 360 65 360 360 360 360 360

Motor (230 V-50 Hz mono) W 75 75 100 100 180 180 180 250 250

WEIGHTAND DIMENSIONS JM 4 LN-10 JM 4 LN-15 JM 7 LN-15 JM 7 LN-20 JM 13 LN-20 JM 21 LN-20 JM 21 LN-25 JM 30 LN-25 JM 30 LN-32

Packing dimensions mm 285 x 260 285 x 260 400 x 300 400 x 300 600 x 370 600 x 370 600 x 370 795 x 490 795 x 490

x 390 x 390 x 515 x 515 x400 x 400 x 400 x 550 x 550Weight Kg 12,5 12,5 14,0 14,0 25,0 25,0 25,0 40,0 40,0


16/37

a 16


TWO STAGES MODELS COMPLETE WITH CE GAS TRAIN


The JM LN/AB two-stage gas burners



and are available in 7 models with

thermal powers between 65 and 190 kW.


(class 3, 80 mg/kWh) are obtained by means

of a special combustion head.


pressure, they operate with methane gas only.




All the JM LN/AB burners are also equipped with an elec-

tric servo-control on the air shutter and a stabilised venti-

lation system.



flanges with universal drillings (sliding for models JM 13

LN/AB and JM 21 LN/AB).






17/37

a 17


TWO STAGES MODELS COMPLETE WITH CE GAS TRAIN


(1) Minimum gas pressure to obtain maximumburner power. (2) Maximum operating pressure of gas valves.

(*) Specific quotes for versions with standard nozzles.(**) Specific quotes for versions with long nozzles.

TECHNICAL DATA JM 7 LN/AB-15 JM 7 LN/AB-20 JM 13 LN/AB-20 JM 21 LN/AB-20 JM 21 LN/AB-25 JM 30 LN/AB-25 JM 30 LN/AB-32

Code 9383006120 9383007120 9383012120 9383016120 9383017120 9383021120 9383022120

Capacity (min - max) kW 21,0 65,0 21,0 65,0 35,0 120,0 40,0 150,0 40,0 150,0 60,0 190,0 60,0 190,0

Fuel consumption (min - max) m3/h 2,2 6,9 2,2 6,9 3,7 12,7 4,2 16,0 4,2 16,0 6,4 20,0 6,4 20,0

Gas system / Gas train connections 1/2 - 1/2 3/4 - 3/4 3/4 - 3/4 1/2 - - 1/2 1 - 1 1 - 1 1 1/4 - 1 1/4

Min. pressure (1) (natural gas) mbar -- 20 20 -- 18 -- 20

Max pressure (2) mbar 65 360 360 360 360 360 360

Motor (230 V-50 Hz mono) W 100 100 180 180 180 250 250

WEIGHTAND DIMENSIONS JM 7 LN/AB-15 JM 7 LN/AB-20 JM 13 LN/AB-20 JM 21 LN/AB-20 JM 21 LN/AB-25 JM 30 LN/AB-25 JM 30 LN/AB-32

Dimensioni imballo mm 400 x 300 400 x 300 600 x 370 600 x 370 600 x 370 795 x 490 795 x 490

x 515 x 515 x400 x 400 x 400 x 550 x 550Peso Kg 14,0 14,0 25,0 25,0 25,0 40,0 40,0


18/37

a 18

LOW AND AVERAGE CAPACITY GAS BURNERS WITH LOW NOx

TWO STAGES MODELS PROGRESSIVES MODULATED COMPLETE WITH CE GAS TRAIN


The progressive two-stage gas burners

of the JM LN/PR series



and are available in 9 models with

thermal powers between 150 and 490 kW.


(class 3, 80 mg/kWh) are obtained

by means of a special combustion head.

Burners of the JM LN/PR series, with the application of the

modulation kit, available upon request, can operate in

continual modulation.


pressure, they operate with methane gas only.



The gas flow rate is regulated by a variable profile cam,

controlled by electric servo-control.


All the JM LN/PR burners are also equipped with an elec-

tric servo-control on the air shutter and a stabilised venti-

lation system.



flanges with universal drillings (sliding for JM 21 LNPR

models).






19/37

a 19

LOW AND AVERAGE CAPACITY GAS BURNERS WITH LOW NOxTWO STAGES MODELS PROGRESSIVES MODULATED COMPLETE WITH CE GAS TRAIN


N.B.: Modulating operation can be obtainedfitting the burner with the specific accessoriesindicated at the end of the chapter.

(1) Minimum gas pressure to obtain maximumburner power.

(2) Maximum operating pressure of gas valves.

WEIGHTAND DIMENSIONS JM 21 LN/PR-25 JM 35.1 LN/PR-25 JM 35.1 LN/PR-32 JM 42 LN/PR-25 JM 42 LN/PR-32 JM 49 LN/PR-32 JM 49 LN/PR-40

Packing dimensions mm 600 x 370 795 x 490 795 x 490 795 x 490 795 x 490 1030 x 530 1030 x 530x 400 x 550 x 550 x 550 x 550 x 590 x 590

Weight Kg 25,0 42,0 42,0 45,0 45,0 57,0 57,0

TECHNICAL DATA JM 21 LN/PR-25 JM 35.1 LN/PR-25 JM 35.1 LN/PR-32 JM 42 LN/PR-25 JM 42 LN/PR-32 JM 49 LN/PR-32 JM 49 LN/PR-40

Code 9383017130 9382026130 9382027130 9382032130 9382033130 9383039130 9383040130

Capacity (min - max) kW 40,0 150,0 65,0 260,0 65,0 260,0 90,0 350,0 90,0 350,0 132,0 490,0 132,0 490,0

Fuel consumption (min - max) m3/h 4,2 16,0 6,88 27,5 6,88 27,5 9,5 37,0 9,5 37,0 14,0 52,0 14,0 52,0

Gas system / Gas train connections 1 - 1 1 - 1 1 1/4 - 1 1/4 1 - 1 1 1/4 - 1 1/4 1 1/4 - 1 1/4 1 1/2 - 1 1/2

Min. pressure (1) (natoral gas) mbar 16 -- 20 -- 18 -- 23

Max pressure (2) mbar 360 360 360 360 360 360 360

Motor (230 V-50 Hz mono) W 180 370 370 450 450 620 620


20/37


21/37

a 21

/L : Burner with long intake port. For further detailsconcerning the intake port length (when not specified),please call our head office.

/2 : Burner with 2 stages.

(1) Values referred to natural gas at 15C temperatureand 1013 mbar pressure.

(2) Burners fitted with special boiler coupling f lange, slidingto make easier the positioning of the fire mouthin the combustion chamber.

SEMI-PRESSURIZED GAS BURNERSSINGLE AND TWO STAGES MODELS

SEMI-PRESSURIZED GAS BURNERS


JM 3 GAS JM 6 GAS JM 9 GAS JM 12 GAS JM 12/L GAS JM 16 GAS JM 18 GAS JM 18/LP GAS JM 9/2 GAS JM 16/2 GAS JM 18/2L GASTECHNICAL DATA (2) (2) (2) (2) (2) (2) (2)

Burner code 9311006110 9311011110 9311015110 9305022110 9315022110 9305025110 9305030110 9315030110 9311015120 9305025120 9315030120

Gas train code 08011390 08011390 08011410 9025105000 9025105000 08024650 9025106000 9025106000 08011420 08012240 9025090000

Capacity (min - max) kW 11,9 - 37,7 27,0 - 66,6 43,0 -89,5 49,8 - 120,0 49,8 - 120,0 80,0 - 160,0 99,0 - 169,0 99,0 - 169,0 43,0 - 89,5 55,0 - 153,0 99,0 - 169,0kcal/h x103 10,2 - 32,4 23,2 - 57,2 37,0 - 77,0 42,8 - 103,2 42,8 - 103,2 68,8 - 137,6 85,1 - 145,3 85,1 - 145,3 37,0 - 77,0 47,3 - 131,58 85,1 - 145,3

Fuel consumption (1) (min-max) m3/h 1,26 - 3,99 2,86 - 7,05 4,55 - 9,47 5,27 - 12,7 5,25 - 12,7 8,46 - 16,9 10,4 - 17,9 10,4 - 17,9 4,55 - 9,47 5,8 - 16,2 10,4 - 17,9

Motor W 100 100 100 100 100 110 185 185 100 110 185

Condenser (450 V) F 4 4 4 4 4 -- 6,3 6,3 4 - 6,3

Air shutter manual adj. manual adj. manual adj. manual adj. manual adj. manual adj. manual adj. manual adj. motorized manual adj. motorizedcompletely closed completely closed

Power supply: 230 V monophasic 50 Hz; Ignition transformer: 8 kW, 20 mA.


WEIGHT AND DIMENSIONS JM 3 GAS JM 6 GAS JM 9 GAS JM 12 GAS JM 12/L GAS JM 1 6 GAS JM 18 GAS JM 18/LP GAS JM 9/2 GAS JM 16/2 GAS JM 18/2L GAS

A - B mm 320 - 250 342 - 280 417 - 280 483 - 230 633 - 230 480 - 310 525 - 275 675 - 275 417 - 280 480- 310 675 - 275

C - D mm 410 - 215 410 - 247 445 - 247 525 - 285 525 - 285 465 - 282 575 - 340 575 - 340 515 - 247 535 - 282 700 - 340

E - F mm 230 - 90 252 - 90 277 - 140 358 - 150 358 - 275 -- 400 - 150 400 - 275 277 - 140 -- 400 - 275

G mm 80 80 90 114 114 108 114 114 90 108 114

H mm 160 195 195 232 232 215 274 274 195 215 274

I mm -- -- -- 90 90 -- 110 110 -- -- 110

L mm 145 145 195 330 330 210 355 355 195 215 240

M mm 135160 135160 135160 110150 110150 150200 110150 110150 135160 150200 110150

N mm -- -- -- 180 180 166 180 180 -- -- 180

P mm 85 85 95 120 120 115 120 120 95 115 120

R inch 1/2 1/2 1/2 1 1 3/4 1 1 1/2 3/4 1

Packing dimesnsions mm 450 x 450 x 450 x 555 x 690 x 530 x 640 x 760 x 450 x 530 x 760 x340 x 310 340 x 310 340 x 310 290 x 370 310 x 390 380 x 380 345 x 400 360 x 440 340 x 310 380 x 380 360 x 440

Weight kg 11,5 12,5 13,7 13,7 13,5 21,0 15,5 17,5 14,0 22,0 18,0


22/37


23/37

a 23

PRESSURIZED AVERAGE CAPACITY GAS BURNERSSINGLE STAGE, TWO STAGES AND PROGRESSIVES TWO STAGES MODELS

PRESSURIZED AVERAGE CAPACITY GAS BURNERS

(1) Values referred to gas at 15C temperatureand 1013 bar pressure.

(2) Values referred to the minimum size.

(3) The modulating operation may be obtained by fittingthe burners with suitable accessories, listed in details atthe end of this chapter.

(*) Hole to be madein the boiler plate

(*) Hole to be madein the boiler plate

LPG operation system:For the burners Model G 50/2, G 50/M, G 70/2, G 70/M where LPGfiring is required, the gas distributor baffle ring has to be chan-ged. For the burners Model G 26, G 26/2, G 26/M, when LPG firingis required, the combustion head has to be changed. The burnersModel G 35, G 35/2, G 35/M need no change in case of LPG opera-tion.

SINGLE STAGE MODELS TWO STAGES MODELS PROGRESSIVES TWO STAGES MODELS (3)

TECHNICAL DATA G 26 GAS G 35 GAS G 26/2 GAS G 35/2 GAS G 50/2 GAS G 70/2 GAS G 26/M GAS G 35/M GAS G 50/M GAS G 70/M GAS

Burner code 9311031110 9364040110 9311031120 9364040120 9364050120 9364070120 9311031200 9364040200 9364050200 9364070200

Gas train code 08011440 9025098000 08011450 9025099000 9025100000 9025102000 08015470 9025171000 9025101000 9025103000

Capacity (min -max) kW 129,0 - 245,0 188,0 -320,0 90,0 - 231,0 115,0 -390,0 145,0 - 582,0 210,0 - 740,0 90,0 - 231,0 115,0 - 390,0 145,0 - 582,0 210,0 - 740,0kcal/h x103 111,0 - 2 10,7 161,0 - 275,0 77,4 - 198,6 98,9 - 335,4 124,6 - 500,5 180,6 - 636,4 77,4 - 198,6 98,9 - 3 35,4 124,6 - 500,5 180,6 - 636,4

Fuel consumption (1) (min - max) m3/h 13,65 - 25,92 19,9 - 33,9 9,5 - 24,4 12,2 - 41,3 15,34 - 61,59 22,2 - 78,3 9,5 - 24,4 12,2 - 41,3 15,34 - 61,59 22,2 - 78,3

Power supply V - Hz 230 - 50 230 - 50 230 - 50 230 - 50 230/400 - 50 230/400 - 50 230 - 50 230 - 50 230/400 - 50 230/400 - 50monophasic monophasic monophasic monophasic threephasic threephasic monophasic monophasic threephasic threephasic

Motor W 230 370 230 370 1.100 1.500 230 370 1.100 1.500

Condenser (450 V) F 8 14 8 14 -- -- 8 14 -- --

Ignition transformer kW - mA 10 - 20 12 - 35 10 - 20 12 - 35 12 - 35 12 - 35 10 - 20 12 - 35 12 - 35 12 - 35

Flame control ionizzazione ionizzazione ionizzazione ionizzazione ionizzazione ionizzazione ionizzazione ionizzazione ionizzazione ionizzazione

Air shutter manual adj. manual adj. motorized motorized motorized motorized motorized motorized motorized motorized

SINGLE STAGE MODELS TWO STAGES MODELS PROGRESSIVES TWO STAGES MODELS (3)

WEIGHT AND DIMENSIONS G 26 GAS G 35 GAS G 26/2 GAS G 35/2 GAS G 50/2 GAS G 70/2 GAS G 26/M GAS G 35/M GAS G 50/M GAS G 70/M GAS

C mm 650 740 650 835 960 1.100 650 740 840 1.020

L mm 240 260 240 260 350410 380510 240 290 350 600

R inch 1 1 1/4 1 1/4 1 1/4 1 1/2 2 1 1/4 1 1/4 1 1/2 2

Burner connection inch 1 1 1/4 1 1 1/4 1 1/2 2 1 1/4 1 1/4 1 1/2 2

Packing dimensions mm 450 x 500 x 450 x 500 x 500 x 500 x 450 x 500 x 500 x 500 x840 x 510 540 x 960 840 x 510 540 x 960 700 x 1.200 700 x 1.200 840 x 510 540 x 960 700 x 1.200 700 x 1.200

Weight kg 32,0 40,0 33,0 41,0 57,0 61,0 33,0 42,0 57,0 61,0


24/37

a 24

INDUSTRIAL GAS BURNERS

TWO STAGES PROGRESSIVES MODULATED MODELS



JNS G 600 and JNS G 1000 are progressive two-stage air-

blown gas burners with reduced starting flow rate.

Methane gas functioning. Provided for power modulation

operation with the specific kit module.

Gas ramp with 2 class A solenoid valves (slow opening

adjustment solenoid valve and fast safety solenoid valve),

stabiliser, air minimum pressure switch, gas minimum

pressure switch and gas filter. Combustion head with mini-

mum adjustment ring and examinable, compact, comple-

te with stainless steel nozzle and steel baffle plate. Air-gas

mixture to combustion head optimised by automatic com-

burent air flow adjustment through automatic electrically

servo-controlled closing shutter and gas flow rate regula-

tion. Ionisation probe for flame presence control.

Possibility to connect a remote release button in terminal

board.

Three-phase 230/400 V - 50Hz electric motor, power 750 to1100 W. Terminal board for electric power supply and bur-

ner thermostat and to control second stage operation

Centrifugal fan for high performances. Shockproof elec-

tric panel. Special devices for facilitated maintenance.

Flange to fasten burner to boiler is pressed on shell.

Supply includes: gasket and screws.

The JNS G 600 and JNS G 1000 burners

are in conformity with:

Low Voltage Directive 73/23/EEC-2006/95/EC

Electromagnetic Compatibility Directive

89/336/EEC-2004/108/EC. Gas Appliances Directive 90/396/EEC



The new air-blown diesel burners of the JNS G line

feature modulating progressive two-stage functioning

with two thermal powers,

of 80-547 and 152-979 kW respectively.


25/37


26/37


27/37

a 27

The modulating operation may be obtained by fitting the burners withsuitable accessories, listed in details at the end of this chapter.

Dimensions with EC ramp for natural gas functioning.

L Hole to be made in the boiler plate.

For information about operation with LPG, please callour Technical Service Dept.

WARNING:These burners may also be delivered in the two-stage version.For details, please call our Sales Dept.


TWO STAGES PROGRESSIVES MODULATED MODELS


TECHNICAL DATA GAS MPN 95/M GASMPN 150/M GASMPN 220/M GASMPN 320/M GASMPN 440/M

Burner code Natural gas 9369095200 9369140200 9369210200 9369310200 9369430200G.L.P. 9369095240 9369140240 9369210240 9369310240 9369430240

Gas train code 08015450 08013330 08013340 08015430 08015430

Capacity (min -max) kW 330,0 - 900,0 530,0 - 1.200,0 860,0 - 1.900,0 1.000,0 - 2.900,0 1.100,0 - 4.200,0kcal/h x103 283,8 - 774,0 155,8 - 1.032,0 739,6 - 1.634,0 846,0 - 2.494,0 946,0 - 3.612,0

Fuel consumption (min - max) m3/h 34,9 - 95,2 56,0 - 127,0 91,0 - 201,0 116,4 - 307,0 116,4 - 444,4

Motor (2800 rev./min) W 1.100 1.800 2.200 5.500 9.200

Total capacity absorbed (230/400 V) A 6,5 - 5,0 9,5 - 6,5 11,0 - 7,5 20,0 - 11,0 32,0 - 19,0

Ignition transformer kW - mA 2 x 5 - 30 2 x 5 - 30 2 x 5 - 30 2 x 6,5 - 35 2 x 6,5 - 35

Power supply: 230 - 400 V Threephasic 50 Hz; Gas category: 11 2H 3+.

WEIGHT AND DIMENSIONS GAS MPN 95/M GASMPN 150/M GASMPN 220/M GASMPN 320/M GASMPN 440/M

A - B mm 1.390 - 775 1.390 - 775 1.450 - 875 1.710 - 920 1.760 - 920

C mm 470 470 470 700 700

E mm 200 460 200 460 200 460 250 550 250 600

G mm 197 197 228 256 303

L mm 210 210 240 270 320

H mm -283 283 318 332 380 440

X mm DN 65 DN 80 DN 100 DN 100 DN 100

Packing dimensions mm 1.500 x 1.000 x 650 1.500 x 1.000 x 650 1.500 x 1.000 x 650 1.760 x 1.000 x 980 1.920 x 1.000 x 1.000

Weight kg 124,0 124,0 130,0 173,0 238,0


28/37


29/37

a 29

HEAVY OIL BURNERS

TWO STAGES MODELS FOR DE-SULPHURIZED HEAVY OIL

HEAVY OIL BURNERS

TECHNICAL DATA NPZ 35/2 NPZ 55/2 NPZ 85/2 NPZ 110/2 NPZ 140/2

Burner code 9169030170 9169050170 9169075170 9169100170 9169130170

Capacity (min -max) kW 202,0 - 364,0 216,5 - 638,0 330,4 - 980,0 421,6 - 1.253,0 514,0 - 1.596,0kcal/h x103 176,4 - 313,6 186,2 - 548,68 284,2 - 842,8 362,6 - 1.078,0 445,04 - 1.372,0

Fuel consumption (min - max) kg/h 18,0 - 32,0 19,0 - 56,0 29,0 - 86,0 37,0 - 111,0 45,1 - 140,0

Power supply V - Hz 230/400 - 50 230/400 - 50 230/400 - 50 230/400 - 50 230/400 - 50trifase trifase trifase trifase trifase

Motor W 370 740 1.500 1.500 1.800

Total capacity absorbed kW 3,2 5,6 8,0 9,8 12,2

Pre-heater kW 2,4 3,7 6,0 7,8 9,8

Weight kg 60,0 96,0 96,0 100,0 105,0

Max fuel viscosity (50C) : 12 15 E.


30/37

a 30


LOW, AVERAGE AND HIGH CAPACITY MODELS


Model MIX G 13, semi-pressurised with automatic sin-

gle-stage operation (80.7 - 163.7 kW) is appropriate

for heat generators that require relatively low poten-

tiality.

The cover in acoustic insulation material, considerably

reduces the noise of the burner.

The pressurised burners MIX G 50/2 (170-543 kW), MIX

G 70/2 (3213-705 kW), MIX GP 75/2 (315-864 kW), MIXGP 120/2 (474-1350 kW) and MIX GP 180/2L (598-1993

kW) with automatic two-stage operation, are desi-

gned for high potential pressurised heat generators;

the two-stage operation excellently meets the diffe-

rent heat requirements.

These models are equipped with separate fuel pump

motor ( MIX GP 75, MIX GP 120, MIX GP 180).

All the burners of the MIX series have an aluminium

die-cast screw conveyor and a high performance and

prevalence fan.

All burners are supplied with use and maintenance

handbook.

Derived from models working with oil and gas of thedifferent application ranges, these burners of our mix line,

can use alternatively both fuels covering a wide

capacity range (from 80,7 to 1993 kW).

They were planned and built following

the appreciated Joannes philosophy,

that puts reliability, high security,

easy installation and maintenance first.




31/37

a 31

DUAL FUEL MIX BURNERSLOW, AVERAGE AND HIGH CAPACITY MODELS


(1) Burners provided with special boiler coupling flange,sliding to make easier the positioning of the fire mouthin the combustion chamber.

L : Long mouth; /2 : two stages.

L: Foro da praticare sulla piastra caldaia.

WEIGHT AND DIMENSIONS MIX G 13 (1) MIX G 13/LP (1) MIX G 50/2 (1) MIX G 70/2 (1) MIX GP 75/2 MIX GP 75/2L MIX GP 120/2 MIX GP 120/2L MIX GP 180/2L

A mm 530 680 1.070 1.110 935 1.190 950 1.205 1.355

B -C mm 275 - 340 275 - 340 420 - 490 420 - 490 690 - 525 690 - 525 760 - 525 760 - 525 760 - 525D - E mm 400 - 130 400 - 280 655 - 415 695 - 415 725 - 210 725 - 465 725 - 225 725 - 480 865 - 490

F - G mm 275 - 114 275 - 114 392 - 170 392 - 170 380 - 185 380 - 185 380 - 230 380 - 230 380 - 320

H mm 110 150 110 150 160 200 160 200 200 200 200 200 300

L - N mm 120 - 180 120 - 180 180 - 230 180 - 230 205 - 290 205 - 290 235 - 290 235 - 290 335 - 370

P mm 600 600 1.050 1.050 725 725 735 735 760

R mm 220 220 410 510 285 285 325 325 340

X M8 M8 M10 M10 M14 M14 M14 M14 M14

Packing dimensions mm 640 x 760 x 500 x 500 x 1.500 x 1.500 x 1.500 x 1.500 x 1.780 x345 x 400 360 x 440 700 x 1.200 700 x 1.200 1.300 x 850 1.300 x 850 1.300 x 850 1.300 x 850 940 x 720

Weight kg 16,0 18,0 57,0 61,0 125,0 130,0 130,0 135,0 160,0

TECHNICAL DATA MIX G 13 (1) MIX G 13/LP (1) MIX G 50/2 (1) MIX G 70/2 (1) MIX GP 75/2 MIX GP 75/2L MIX GP 120/2 MIX GP 120/2L MIX GP 180/2L

Burner code 9452022110 9462022110 9464050120 9464070120 9473085120 9483085120 9473114120 9483114120 9483126120

Gas train code 9025089000 9025089000 9025100000 9025104000 9025082000 9025082000 9025120000 9025120000 9025180000

Capacity (min -max) kW 80,7 - 163,7 80,7 - 163,7 170,2 - 543,1 213,0 - 705,0 315,0 - 864,0 315,0 - 864,0 474,4 - 1.350,0 474,4 - 1.350,0 598,0 - 1.993,0

Fuel consumption g gasoil kg/h 6,8 - 13,8 6,8 - 13,8 14,3 - 45,8 18,0 - 59,4 25,5/36 - 16/36 25,5/36 - 16/36 40/55 - 27/55 40/55 - 27/55 50/84 - 25/84(min-max) gas m3/h 8,54 - 17,32 8,54 - 17,32 18,0 - 57,5 22,5 - 74,6 33,33 - 91,43 33,33 - 91,43 50,2 - 142,86 50,2 - 142,86 63,28 - 210,9

Nozzle (GPH) 1st stage (min - max) 1,75 - 3,50 1,75 - 3,50 3,5 - 2,0 4,5 - 2,0 5,5 - 8,0 5,5 - 8,0 9,0 - 12,0 9,0 - 12,0 11,0 - 18,02st stage (min - max) -- -- 6,0 - 7,0 7,0 - 7,0 3,5 - 8,0 3,5 - 8,0 6,0 - 12,0 6,0 - 12,0 5,5 - 18,0

Pump pressure bar 12 12 12 12 14 - 15 14 - 15 14 - 15 14 - 15 14 - 15

Power supply V - Hz 230 - 50 230 - 50 230/400 - 50 230/400 - 50 230/400 - 50 230/400 - 50 230/400 - 50 230/400 - 50 230/400 - 50monophasic monophasic threephasic threephasic threephasic threephasic threephasic threephasic threephasic

Motor W 185 185 1.100 1.500 2.200 2.200 3.000 3.000 4.800

Condenser F 6,3 6,3 -- -- -- -- -- -- --

Ignition transformer kW - mA 10 - 30 10 - 30 12 - 35 12 - 30 11 - 30 11 - 30 11 - 30 11 - 30 11 - 30

Flexible oik pipe inch 1/4 1/4 Int.- Ret. 3/8 Int.- Ret. 3/8 Int.1/2- Ret. 3/8 Int.1/2- Ret. 3/8 Int.- Ret. 1/2 Int.- Ret. 1/2 Int.- Ret. 1/2Lenght. mm 800 800 -- -- -- -- -- -- --

Air shutter manual adj. manual adj. Adjustment Adjustment Adjustment Adjustment Adjustment Adjustment Adjustmentwi thout closing wi thout closing by servomotor by servomotor by servomotor by servomotor by servomotor by servomotor by servomotor


32/37


33/37

BURNERS ACCESSORY

STANDARD TWO-STAGES GAS TRAIN

BURNERS ACCESSORY

TECHNICAL CHARACTERISTICS:

Electrical main supply / fequency: 230 V (-15% +10%) / 50-60 HzRoom temperature: -15C +70COperate time: 100%

Protection rate: IP 54Class A Group 2 (DIN EN 161)

GAS TRAIN COMPOSED BY:

1. Minimum gas pressure switch2. Two-stages operation valve

BURNER-GAS TRAIN MATCH

GAS HEAT OUTPUT GAS TRAIN MINIMUM PRESSURE WORKINGBURNER CONNECTION (min-max) GAS TRAIN DIMENSION NAT. GAS L.P.G. PRESSURE KIT L.P.G.MODEL kW CODE mbar mbar mbar CODE

JM 18/2 GAS 3/4 99,0 - 169,0 9025032000 3/4 10,0 8,0 20 - 30 --

G 26/2 GAS 1 129,0 - 245,0 08018750 1 12,0 20,0 20 - 30 - 200 - 360 08.02538.0

G 35/2 GAS 1 115,0 - 390,0 9025034000 1 18,0 -- 20 --

3/4 115,0 - 390,0 9025150000 3/4 28,0 7,0 30 - 100 --

G 50/2 GAS 1 1/2 145,0 - 582,0 9025035000 1 1/2 11,0 -- 20 --

3/4 145,0 - 582,09025150000

3/4 55,0 20,0 30 - 100 08.02539.0G 70/2 GAS 2 210,0 - 740,0 9025036000 2 12,0 -- 20 --

1 1/2 210,0 - 740,0 9025151000 1 1/2 17,0 15,0 30 - 100 08.02528.0

3/4 210,0 - 740,0 9025251000 3/4 89,0 -- 200 - 360 --

MIX G 50/2 1 1/2 170,2 - 543,1 9025035000 1 1/2 11,0 -- 20 --

MIX G 70/2 2 213,0 - 705,0 9025036000 2 12,0 -- 20 --

MIX GP 75/2 2 315,0 - 864,0 9025052000 2 8,0 -- 20 --

MIX GP 120/2 DN50 474,4 - 1350,0 9025055000 DN50 15,0 -- 20 --

MIX GP 180/2 DN80 598,0 - 1993,0 9025057000 DN80 9,0 -- 20 --

a 33


34/37

BURNERS ACCESSORY

CE SINGLE STAGE GAS TRAIN MULTIBLOK

BURNERS ACCESSORY


GAS HEAT OUTPUT GAS TRAIN MINIMUM PRESSURE WORKINGBURNER CONNECTION (min-max) GAS TRAIN DIMENSION NAT. GAS L.P.G. PRESSURE KIT L.P.G.

MODEL kW CODE mbar mbar mbar CODE

JM 3 GAS 1/2 11,9 - 37,7 08011390 1/2 12,5 10,5 20 - 30 - 100 --1/2 11,9 - 37,7 08011400 1/2 12,5 -- 200 --1/2 11,9 - 37,7 08011410 1/2 11,0 -- 360 --

JM 6 GAS 1/2 27,0 - 66,0 08011390 1/2 20,0 14,0 20 - 30 - 100 --1/2 27,0 - 66,0 08011400 1/2 24,0 -- 200 --3/4 27,0 - 66,0 08011410 1/2 16,0 -- 360 --

JM 9 GAS 1/2 43,0 - 89,5 08011400 1/2 33,0 19,0 20 - 30 - 100 --3/4 43,0 - 89,5 08011410 1/2 18,0 -- 20 --

JM 12 GAS 1 49,8 - 120,0 9025105000 1 16,0 -- 20 --

1/2 49,8 - 120,0 9025270000 1/2 22,0 11,0 30 - 100 - 200 --JM 16 GAS 3/4 80,0 - 160,0 08024650 1 18,0 -- 20 --

1/2 80,0 - 160,0 08024640 1/2 -- 281,0 30 - 100 - 200 --

JM 18 GAS 1 99,0 - 169,0 9025106000 1 11,0 -- 20 --1/2 99,0 - 169,0 9025272000 1/2 27,0 14,0 30 - 100 - 200 - 360 --

G 26 GAS 1 129,0 - 245,0 08011440 1 20,0 -- 20 --3/4 129,0 - 245,0 08011480 1/2 53,0 -- 200 - 360 --3/4 129,0 - 245,0 08011430 3/4 40,0 28,0 30 - 100 08.02538.0

G 35 GAS 1 1/4 188,0 - 320,0 9025098000 1 1/4 18,0 -- 20 --3/4 188,0 - 320,0 9025168000 3/4 16,0 26,0 30 - 100 - 200 - 360 --

AZ 3 GAS 3/8 13,4 - 35,6 9025071000 3/8 17,0 -- 20 --

AZ 9 GAS 3/4 32,1 - 79,3 9025073100 3/4 20,0 -- 20 --1/2 32,1 - 79,3 9025270000 1/2 23,0 16,0 30 - 100 - 200 - 360 --





1. Gas filter2. Minimum gas pressure switch3. Safety valve4. Pressure stabilizer5. Single stage operation valve

a 34


35/37


36/37


GAS HEAT OUTPUT GAS TRAIN MINIMUM PRESSURE WORKINGBURNER CONNECTION (min-max) GAS TRAIN DIMENSION NAT. GAS L.P.G. PRESSURE KIT L.P.G.MODEL kW CODE mbar mbar mbar CODE

G 26/M GAS 1 1/4 130,0 - 250,0 08015470 1 1/4 15,0 -- 20 --3/4 130,0 - 250,0 08015480 3/4 25,0 30,0 30 - 100 08.02538.03/4 130,0 - 250,0 08015490 3/4 25,0 -- 200 - 360 --

G 35/M GAS 1 1/4 163,0 - 390,0 9025171000 1 1/4 18,0 -- 20 --3/4 163,0 - 390,0 9025167000 3/4 45,0 25,0 30 - 100 --3/4 163,0 - 390,0 9025274000 3/4 45,0 -- 200 - 360 --

G 50/M GAS 1 1/2 145,0 - 582,0 9025101000 1 1/2 20,0 -- 20 --1 1/4 145,0 - 582,0 9025171000 1 1/4 25,0 17,0 30 - 100 08.02529.01 1/4 145,0 - 582,0 9025276000 1 1/4 25,0 -- 200 - 360 --

G 70/M GAS 2 210,0 - 740,0 9025103000 2 18,0 -- 20 --1 1/4 210,0 - 740,0 9025173000 1 1/4 30,0 22,0 30 - 100 08.02528.01 1/4 210,0 - 740,0 9025278000 1 1/4 30,0 -- 200 - 360 --

MPN 95/M DN 65 500,0 - 900,0 08015450 DN 65 20,0 -- 20 --1 1/2 500,0 - 900,0 08013410 1 1/4 49,0 30,0 30 - 100 --

MPN 150/M DN 80 567,0 - 1200,0 08013330 DN 80 16,0 -- 20 --1 1/2 567,0 - 1200,0 08013410 1 1/2 72,0 -- 100 --2 567,0 - 1200,0 08016570 2 30,0 30,0 30 - 100 --

MPN 220/M DN 100 875,0 - 1900,0 08013340 DN 100 18,0 27,0 20 - 30 --2 875,0 - 1900,0 08013350 2 54,0 -- 100 --

MPN 320/M DN 100 940,0 - 2900,0 08015430 DN 100 28,0 -- 30 --

DN 65 940,0 - 2900,008013320

DN 65 67,0 -- 100 --DN 80 940,0 - 2900,0 08017890 DN 80 48,0 22,0 30 - 100 --

MPN 440/M DN 100 2080,0 - 4275,0 08015430 DN 100 29,0 -- 30 --DN 65 2080,0 - 4275,0 08013320 DN 65 99,0 28,0 30 - 100 --





1. Gas filter 2. Minimum gas pressure switch3. Safety valve 4. Pressure stabilizer5. Two stages progressive or modulating operation valve6. Tigjtness control (supplied as standard for o utput >1200 kW)

BURNERS ACCESSORY

CE MODULATING GAS TRAIN MULTIBLOK

BURNERS ACCESSORY

a 36


37/37

BURNERS ACCESSORYSEAL CONTROL KIT, PRESSURE REGULATORS, MODULATION KIT, SECURITY VALVES

BURNERS ACCESSORY

SEAL CONTROL TO MAKEUNI-CIG GAS TRAIN

TO COUPLE WITH STANDARD GAS TRAINCODE MODEL

9025016000 MIX GP 75/2 2

9025017000 MIX GP 120/2 DN 65

9025018000 MIX GP 180/2L DN 100

TO COUPLE WITH CE GAS TRAIN

CODE MODEL VALVE

08013650 AZ 9 GAS multiblok08013650 JM 9 multiblok

08013650 JM 9/2 multiblok

08013650 JM 12 multiblok

08013650 JM18 multiblok

08013650 G 26 GAS multiblok

08013650 G 26/2 GAS multiblok

08013650 G 26/M GAS multiblok

9025110000 G 35 GAS multiblock

9025110000 G 35/2 GAS multiblock

9025110000 G 35/M GAS multiblock





9025111000 G 70/2 GAS main + safety

9025110000 MIX G 50/2 multiblock

9025111000 MIX G 70/2 main + safety

08013650 GAS MPN 95/M multiblock

08013650 GAS MPN 150/M multiblock

SOUND-PROOFINGCODE DESCRIPTION

281840 Sound proofing means for MIX GP 75/2 MIX GP 120/2

PRESSURE REGULATORAND GAS FILTER

TO CONFORM UNI-CIG GAS TRAIN TO CE RULESCODE MODEL

849031 MIX GP 75/2 2

849045 MIX GP 120/2 DN 65

849046 MIX GP 180/2L DN 80

ACCESSORIES FOR MODULATING

BURNERS

GAS BURNERSG 35/M GAS, G50/M GAS, G 70/M GAS

CODE DESCRIPTION

224655 Kit modulator-regulator RWF 32,cover, holding bracket

273152 Field adaptor for temperature probe 0 - 130C

997737 Temperature probe 0 - 130C997690 Field adaptor for pressure probe

997700 Pressure probe 0 - 2 bar



MODULATING GAS AND GASOIL BURNERS

Unit regulation RWF 40 and temperature sonde

CODE DESCRIPTION

08013160 Temperature modulating kit 0 - 130C

08013170 Temperature modulating kit 150 - 450C

Unit regulation RWF 40 and pressure sonde

CODE DESCRIPTION

08013130 Pressure modulating kit 0 - 4 bar

08013140 Pressure modulating kit 0 - 10 bar

08013150 Pressure modulating kit 0 25 bar

a_burners.pdf

Documents