Product Overview
BPG Enclosures• GRP enclosure in standard (Grey)
or Carbon loaded (black anti-static)
• IP66/67 to IEC/EN 60529• DTS01 (Shell/ERA deluge test)• Ambient temp range:
– -65 to +130°C (Hazardous)– -70 to +130°C (Non-Hazardous)
• Holes can be drilled on any side including rear face
• High impact strength: IK09 (10 Joules)
• Fire rated• Various accessories available:
– Mounting feet– Security screws
BPGA Range
• Pre-assembled GRP range (BPG6 & BPG8 sizes)• Complete with terminals and entries (2 x Side A & C)• Dual labelled ATEX & IECEx
SX Enclosures• 316L Stainless Steel • IP66/67 to IEC/EN 60529• DTS01 (Shell/ERA deluge test)• Ambient temp range:
– -50 to +175°C (Hazardous)– -60 to +200°C (Non-Hazardous)
• High impact strength: IK10 (20 Joules)• Holes can be drilled on any side
including rear face• Custom sizes available
– Ex certified up to 2m x 2m x 2m• Windows can be added to enclosure
door• ATEX certified Ex de sockets can be
fitted to enclosure• Fire rated
Fire Rated Enclosures – SX & BPGIEC331 Fire Test• 750°C for 3 hours followed by visual inspection• Then 5kV insulation resistance test
BS6387 Fire Test - 3 separate tests1. Fire alone: Category C
• Flame at 950°C for 3 hours, cables powered2. Fire with Water: Category W
• Flame at 650°C for 15 minutes then flame and water spray for 15 minutes
3. Fire with Mechanical shock: Category Z• Flame at 950°C with mechanical shock applied at 15s
intervals for 15minutes
• Note: All fire rated enclosures must be fitted with ceramic terminals
ZAG Enclosures• Marine grade Aluminium• Can be painted to customer
specification• IP66/67 to IEC/EN 60529• Holes can be fitted to any side
including rear face• Available as Apparatus and
Component certified enclosures• Large number of terminal types
to choose from• Use Power dissipation method for
calculating terminal population
SSD Enclosure• Stainless Steel Ex d Enclosure• Used for containing transformers,
circuit breakers, motor controls, PLC’s etc
• ATEX & IECEx IIB or IIB+H2 certified• Ambient range -20°C to +55°C• Can be fitted with pushbuttons,
selector switches & windows• Custom sizes available:
– Almost any size dictated by surface area: from 560cm² to 18000cm²
• Maximum voltage 660V ac 120V dc
Nautilus IP68• Stainless Steel 316 Ex e Enclosures• Terminal boxes only - based on the
same permitted terminal lists as the SX, BPG and ZAG range
• ATEX & IECEx Ex e, Ex ia or Ex ib certified
• Certified IP68 to EN60529• 100m for 5 days • 50m for 14 days
• T5 rated with an ambient temperature range of -50ºC to +55ºC
• Hinged cover with handle and lifting eye straps fitted as standard
• Optional mild steel or stainless steel mounting plates available
High Voltage Enclosures• Ex certified HV range based
on SX enclosure• From 3.3kV up to 45kV and
3.2kA• Suitable for -50°C• Typical applications:
– Umbilical connection– Down hole pumps– Water injection pumps– Fire suppression systems– Temporary power supply
connections
HVJB 125• A unique solution for the
termination of offshore umbilical cables or onshore distribution systems.
• The power conductor compartment houses the HV cables. A separate control compartment is used for terminating fibre optic or control cables.
• Ex e or Ex e op is
• Other ratings same as HVJB series
Hazardous & Marine Lighting
• Zone 1, Zone 2 and Safe Area luminaires for harsh environments
• LED, Fluorescent and HID lamp options• Designed for simple installation and low
maintenance• Low Glare (patent pending) LED technology• Dark sky asymmetric floodlight design reduces
light pollution and glare
Nimbus• Panel luminaire supplied
with satellite power supply• Zone 1, Zone 2 & Safe Area• ATEX & IECEx compliant• Extremely thin profile
>12mm• Significant weight and
energy saving over traditional recessed fluorescent
• Excellent uniformity and colour rendering
• Dimmable option
Gamma LG• Zone 2, 21 & 22 • ATEX & IECEx compliant• Utilises patent pending light
guide technology for low glare solution
• Designed for lower mounting heights where visual discomfort glare is an issue
• Marine grade stainless steel construction
• Built in junction box for simple installation
APC Photocell• A zone 1 & 2 photocell for
the control of luminaires• On-load switching up to 10
& 16Amps.• Can be used as combined
photocell/junction box• Zone1, 2 and 22 areas • ATEX and IEC Ex certified• Ambient temperature
range: -40°C to +55°C• Ingress protection IP66/67
to IEC 529
Control Station Range
• PCS (Polycarbonate) – ATEX Compliant• ABCS (GRP) & SXCS (Stainless Steel) – ATEX &
IECEx Compliant• IP66 to IEC/EN 60529• Range of sizes and operator options available:
– Pushbuttons, e-stops, indicator lamps, illuminated pushbuttons, selector switches & ammeters
Wide Range Available
• Non-armored single compression cable gland Ex d / Ex e
• SWA/Braid type double compression cable gland Ex d / Ex e
• Adaptors, Reducers & Stopping plugs for NPT or Metric thread types
• Accessories – locknuts, washers, earth tags, shrouds• All products manufactured in nickel plated brass• Stainless steel option available