ABS Quality Evaluations ABS Quality Evaluations, Inc. 1701 City Plaza Drive, Spring, TX 77389, U.S.A. Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation. Validity of this certificate is based on the successful completion of the periodic surveillance audits of the management system defined by the above scope and is contingent upon prompt,written notification to ABS Quality Evaluations, Inc. of significant changes to the management system or components thereof. Copyright 2011-2019 ABS Quality Evaluations, Inc. All rights reserved. This is to certify that the Quality Management System of: High Temp Metals 12500 Foothill Blvd Sylmar, CA 91342 U.S.A. AS9100:2016 (techn. equiv. to EN9100:2018 & JISQ9100:2016) & ISO9001:2015 The Quality Management System is applicable to: Certificate No: 52069 Certification Date: 15 October 2015 Effective Date: 14 October 2018 Expiration Date: 13 October 2021 Revision Date: 30 June 2019 Certification Structure: AS - Single Dominic Townsend, President The Certification has been assessed to and approved in accordance with the rqmts of AS9104/1:2012 by ABS QE, an accredited Aerospace Registration Mgmt. Prog. Certification Body, under the ICOP scheme. THE PROVISION OF WATER JET CUT METAL SHAPES AND DISTRIBUTION OF HIGH TEMPERATURE, CORROSION RESISTANT, SHIELDING, ELECTRONIC, AND CONTROLLED EXPANSION GRADES OF NICKEL AND COBALT ALLOY METALS. Certificate Of Conformance has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by: