-
Maschinenfabrik
Vertrauen Sie auf mehr als 65 Jahre Erfahrung von HESSE+CO!
Trust in more than 65 years of experience of HESSE+CO!
ABKANTWERKZEUGE
www.hesse-maschinen.com
PRESS BRAKE TOOLS
System Promecam-Amada, Rolleri und Wila!Abkantwerkzeuge und
Scherenmesser
nach Ihrer Zeichnung!Messerschleifen und
Werkzeugnacharbeiten!System Promecam-Amada, Rolleri und Wila!
Press brake tools and sharing bladesaccording to your
drawings!
Regrind shear blades and tool touch up works!
-
2 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
INHALTTABLE OF CONTENTS
Laserschutzvorrichtung laser safety device
3Sicherheitsüberprüfungen safety inspections 3Oberwerkzeugsystem
ROLLERI upper tool system ROLLERI 4Abkantfolien urethane brake die
fi lm 5Abkantwerkzeuge WILA press brake tools WILA 6Preis- und
Lieferbedingungen price and delivery conditions 10Oberwerkzeuge
System Amada-Promecam upper tools system Amada-Promecam
11Unterwerkzeuge System Amada-Promecam lower tools system
Amada-Promecam 31Zudrückwerkzeuge haming tools 50Z-Werkzeuge
(Prägewerkzeuge) Z-tools (embossing tools) 54Oberwerkzeugaufnahmen
upper tool clampings 55Matrizenaufnahmen lower tool clampings
60Biegetabelle bending chart 64Werkzeuge System Hesse tools system
Hesse 65Sonderwerkzeuge special tools 66Nacharbeiten,
Messerschleifen, Service touch up work, regrind shear blades,
service 67
“EAMTM” - europäische Vereinigung der
Werkzeugmaschinenhändler.“EAMTM” - european association of machine
tool merchants.
“FDM” - Fachverband des Maschinen- und Werkzeuggroßhandels
e.V.“FDM” - technical organisation of machines- and tools wholesale
e.V.
Wir sind Mitglied bei:We are member of:
Besuchen Sie unsere Ausstellungshallen! Visit our showrooms!
-
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected] 3
Wir rüsten Ihre Maschine lt. der aktuellen
Ar-beitsmittelschutzverordnung um.Bitte um Ihre Anfrage!
Absicherung ohne Behinderung bei maximaler
ProduktivitätProtection without handicap at maximum
productivity
Wir bieten an:1. Überprüfung aller
Maschinenschutzvorrichtungen2. Überprüfung der
Schließgeschwindigkeiten, Nachlaufwege,
Haltezeiten und Sicherheitsabstände lt. ÖNORMEN EN 294Gerne
erstellen wir ein Angebot für die Sicherheitsüberprüfung an Ihren
Maschinen.
Abkant- und Exzenterpressen unterliegen gesetzlichen
Bestimmungen zum Schutz der ArbeitnehmerInnen und müssen jährlich
überprüft wer-den.
LASERSCHUTZVORRICHTUNG zur NACHRÜSTUNGLASER SAFETY DEVICE to
RETROFIT
SICHERHEITSÜBERPRÜFUNGENSAFETY INSPECTIONS
We retrofi t your machine according to the pre-sent industrial
safety regulation.We kindly ask for your inquiry!
Press brakes and eccentric presses are liable to legal
regelations to pro-tect employees and have to be inspected
annually.
We offer: 1. Inspection of all machine guards2. Inspection of
the closing speeds, overtravel time, overtravel distance,
stop times and safety distances as per ÖNORM EN 294
Ask for an offer for the safety inspection on your machines.
ab / from € 6.200,-nur Materialkoste
n, exkl. Arbeitszeit
only material costs, excl. working
hours
-
4 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
OBERWERKZEUGSYSTEM UPPER TOOL SYSTEM
OBERWERKZEUGSYSTEM
PREISBEISPIEL zur Nachrüstung für Abkantpresse 3.000 mm
mitbestehendem Werkzeugsystem PROMECAM-Amada
ROL1 CLAMP1
15 Stk. Klemmplatten ROL1 CLAMP1 € 212,-/Stk.
Oberwerkzeug DURM97-75-R08 bestehend aus:6 Stk. 415 mm €
268,-/Stk.1 Stk. 805 mm geteilt
SUMME
€ 3.180,-
€ 1.608,-€ 873,-
€ 5.661,- ab Werk Italien zzgl. 20 % Mwst
Wir bitten um Ihre Anfrage!
ROL1 is the innovative quick clamping system for press bra-ke
tooling whose work is completely mechanical, able to increase the
press brake effi ciency and versatility. This system with
appli-cation costs extremely competitive, makes it the best
solution how to improve the older press brake perfomances and
allows a re-duction of the time spent for each operation of change
of tools.ROL1 allows the vertical connection of the tools to the
press bra-ke, thanks to a series of springs loaded push rods that
acts as a an-tif fall safety system as wela s it allows to change
the tools upright.
ROL1 ist ein komplett mechanisch funktionierendes
Schnellspannsy-stem für Abkantwerkzeuge, das die Produktivität und
die Vielseitigkeit der Abkantpressen erhöht. Die äußerst günstigen
Anschaffungskosten ma-chen die Anwendung auch auf älteren Maschinen
rentabel und ermöglicht eine wesentliche Reduzierung der Rüstzeiten
beim Werkzeugwechsel.ROL1 ermöglichen die frontale Spannung der
Werkzeuge auf der Abkantpresse dank einer Reihe von gefederten
Kugeln, die gleichzeitig auch als Anti-Fall-Sicherheitssystem
dienen.
ROL1 kann an allen Abkantpressen mit Zwischen-werkzeugen der
Standardaufnahme Typ Promecam-Amada angewandt werden. Es genügt die
Original-klemmplatten gegen die eigens entwickelten ROL1 CLAMP1
auszutauschen. Diese Klemmplatten in Ver-bindung mit ROL1
ermöglichen dem Bediener den Austausch der Werkzeuge direkt von der
Front der Ab-kantpresse aus, wobei die Werkzeuge auch gleichzeitig
in der richtigen Position in Anschlag gebracht werden.
ROL1 can be installed on all press brakes whose inter-mediate
tool holders are conformable to the Promecam-Amada connection
standard. It is suffi cient to replace the original clamps by the
new ROL1 CLAMP1. Together with ROL1 applied to the tools, the
operator is allowed to change tools upright easily and quickly. At
the same time tools are correctly aligned also in vertical
direction.
-
5Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
Auch bestehende Werkzeuge System Amada-Promecam können mit dem
ROL1 System überarbeitet werden. So-mit lassen sich auch Ihre alte
Werkzeuge auf diese mo-derne Werkzeugwechselsystem adaptieren und
die Ko-sten für neue Werkzeuge können zur Gänze entfallen.
Also existing tools system Amada-Promecam can be adap-ted with
the ROL1 system. Thus also your old tools can fi t this modern tool
changing system and the cost of new tools can be entirely
eliminated.
ABKANTFOLIENURETHANE BRAKE DIE FILM
S[mm]
X[mm]
Mengeamount
Preisprice
Gewichtweight
0,4 1021 - 5 m € 19,- / m
0,06 kg/m6 - 29 m € 18,- / m30 m € 12,- / m
0,55 1001 - 5 m € 21,- / m
0,05 kg/m6 - 29 m € 20,- / m30 m € 15,- / m
0,8 1021 - 5 m € 24,- / m
0,11 kg/m6 - 29 m € 23,- / m30 m € 18,- / m
Zur Vermeidung deutlicher Abdrücke auf Ihren Biegeprodukten.To
avoid plain impressions on your bended products.
ab Lager Wr. Neudorf zzgl. 20 % Mwst
-
6 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
ABKANTWERKZEUGEPRESS BRAKE TOOLS
BIU-035 LängelengthPreisprice
.../6 200 mm € 353,-
.../3 200 mmget./sect. € 353,-
.../1 515 mm € 457,-
.../2 550 mmget./sect. € 906,-Gewicht / weight 34 kg/mMax. Bel.
/ max. load 60 ton/m
OZU-014 LängelengthPreisprice
.../6 200 mm € 224,-
.../3 200 mmget./sect. € 224,-
.../1 515 mm € 298,-
.../2 550 mmget./sect. € 438,-Gewicht / weight 17 kg/mMax. Bel.
/ max. load 100 ton/m
BIU-023 LängelengthPreisprice
.../6 200 mm € 348,-
.../3 200 mmget./sect. € 348,-
.../1 515 mm € 453,-
.../2 550 mmget./sect. € 917,-Gewicht / weight 38 kg/mMax. Bel.
/ max. load 65 ton/m
BIU-031 LängelengthPreisprice
.../6 200 mm € 363,-
.../3 200 mmget./sect. € 363,-
.../1 515 mm € 479,-
.../2 550 mmget./sect. € 946,-Gewicht / weight 29 kg/mMax. Bel.
/ max. load 60 ton/m
OZU-035 LängelengthPreisprice
.../6 200 mm € 261,-
.../3 200 mmget./sect. € 261,-
.../1 515 mm € 345,-
.../2 550 mmget./sect. € 486,-Gewicht / weight 29 kg/mMax. Bel.
/ max. load 100 ton/m
OZU-051 LängelengthPreisprice
.../6 200 mm € 203,-
.../3 200 mmget./sect. € 203,-
.../1 515 mm € 267,-
.../2 550 mmget./sect. € 408,-Gewicht / weight 9,5 kg/mMax. Bel.
/ max. load 40 ton/m
Die Vorteile von New Standard Tooling:• Schneller und einfacher
Werkzeugwechsel• Unübertroffen in Schnelligkeit und Präzision• New
Standard Premium und
New Standard Pro Werkzeuge könnenim selben Klemmsystem verwendet
werden
• Besonders genau, sicher und fl exibel• Konstruktion gemäß der
hohen Wila-Normen• Besonders lange Lebensdauer
Auszug aus dem Lieferprogramm (wir bitten um Ihre
Anfrage):Extract of the delivery program (we kindly ask for your
inquiry):
The advantages of New Standard Tooling:• Quick and easy tool
exchange• Unsurpassed in speed and precision• New Standard Premium
and
New Standard Pro tools can be usedin the same clamping
system
• Exceptionally precise, safe and fl exible• Construction
according to the high
Wila standards• Exceptionally long life span
Safety-Click®Das Wesentliche bei New Standard Oberwerkzeugen ist
der patentierte Sicherheitsmecha-nismus Safety-Click, der zugleich
Bestandteil des Oberwerkzeugs ist. Dieser ermöglicht den vertikalen
Wechsel von Werkzeugsegmenten durch einfaches vertikales Ein- und
Ausklicken aus der Klemmung Safety-Click ermöglicht auch den
automatischen Werkzeugwechsel durch einen Roboter.Safety-Click®The
essence of the New Standard top tools is the patented safety
mechanism Safety-Click®, which is part of the top tool. This
enables the vertical changeover of tool segments by simply clicking
them in and out of the holder vertically. Safety-Click® also makes
it possible to automa-tically change the tools with a robot
ab Werk Holland zzgl. 20 % Mwst
-
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected] 7
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
DeutschlandPRICES excl. 20 % VAT, excl. packaging expenses, ex
works Germany
Art.-Nr. Teillängen / section length kg €1.08.100 1.000: 500,
500 50,0 / m 1.329,001.08.110 1.050: HL(100), 20, 25, 30, 35, 40,
200, 500, HR(100) 50,0 / m 1.535,001.08.120 3.050: HL(100), 20, 25,
30, 35, 40, 200, 5x500, HR(100) 50,0 / m 3.428,00HL...Horn links /
tool extension left HR...Horn rechts / tool extension right
Lieferzeit auf Anfragetime of delivery on request
-
8 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
Art.-Nr. Teillängen / section length kg €1.08.130 1.000: 500,
500 60,0 / m 1.304,001.08.140 1.050: HL(100), 20, 25, 30, 35, 40,
200, 500, HR(100) 60,0 / m 1.512,001.08.150 3.050: HL(100), 20, 25,
30, 35, 40, 200, 5x500, HR(100) 60,0 / m 3.373,00HL...Horn links /
tool extension left HR...Horn rechts / tool extension right
Lieferzeit auf Anfragetime of delivery on request
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
DeutschlandPRICES excl. 20 % VAT, excl. packaging expenses, ex
works Germany
-
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected] 9
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
DeutschlandPRICES excl. 20 % VAT, excl. packaging expenses, ex
works Germany
Art.-Nr. Teillängen / section length kg €1.08.160 1.000: 500,
500 72,0 / m 1.543,001.08.170 1.050: HL(100), 20, 25, 30, 35, 40,
200, 500, HR(100) 72,0 / m 1.751,001.08.180 3.050: HL(100), 20, 25,
30, 35, 40, 200, 5x500, HR(100) 72,0 / m 3.924,00HL...Horn links /
tool extension left HR...Horn rechts / tool extension right
Lieferzeit auf Anfragetime of delivery on request
-
10 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
PREIS- UND LIEFERBEDINGUNGEN für Produkte ab Seite 11PRICE AND
DELIVERY CONDITIONS for products from page 11
Die Preise sind NETTOPREISE und verstehen sich ab Werk Italien
bzw. Deutschland
zzgl. Versand- und Verpackungsspesenzzgl. gesetzlicher Mwst.
Alle bisher gültigen Preise und Rabatte verlieren mit diesem
Preiskatalog Ihre Gültigkeit!
Gültig ab 1. März 2013
The prices are NET PRICES ex work Italy and Germany
respectively
plus forwarding and packagingplus legal VAT
All up to now valid prices and discounts lose their validity
with this price catalogue!
Valid from 1st March 2013
Es gelten ausschließlich die “Allgemeinen Lieferbedingungen des
Fachverbandes der Maschinen- und Stahlbauin-dustrie Österreichs” in
der jeweils gültigen Fassung! Die Ware bleibt bis zur vollständigen
Bezahlung unser unein-
geschränktes Eigentum! Gerichtsstand ist Wien!Only the “general
terms of delivery of the austrian machinery- and steelworking
industry” in each case are valid. We only
sell under proprietary rights - until full payment the
consignment stays in our unrestricted property. Venue is
Vienna!Technische Änderungen, Preisänderungen und Druckfehler
vorbehalten.
Technical changes, price changes and printerrors reserved.
VERSAND- UND VERPACKUNSSPESENFORWARDING AND PACKAGING COSTS
Beispiel / example:1 x 1010/A/88° 415 mm 6,0 kg3 x 1010/A/88°
835 mm 11,0 kg
Gesamtgewicht / total weight = 1x5,5 kg + 3x11,0 kg = 38,5
kgzzgl. 1 % des Werkzeuggewichts für die Verpackung = 38,9
kgentspricht / equals € 50,00 Transportkosten / forwarding
costszzgl. / plus € 18,00 Verpackungsspesen / packaging
Versandkosten innerhalb Österreichs /forwarding charges inside
Austria
Gewicht bis / weight up to
Preis /price
Gewicht bis / weight up to
Preis /price
5 kg € 30,00 125 kg € 120,00
20 kg € 40,00 150 kg € 140,00
40 kg € 50,00 175 kg € 160,00
50 kg € 60,00 200 kg € 180,00
60 kg € 70,00 225 kg € 190,00
70 kg € 80,00 250 kg € 210,00
80 kg € 90,00 275 kg € 230,00
90 kg € 100,00 300 kg € 240,00
100 kg € 110,00 über 300 kg auf Anfrage / on request
Versand und Verpackungsspesen für Werkzeuge auf den Seiten 11
bis 63:forwarding and packaging costs for tools on the pages 11 up
to 63:
Verpackungsspesen / packaging € 18,00
Gewicht der Verpackung 1 % des Werkzeuggewichtsweight of
packaging 1 % of tool weight
Die Lieferzeit beträgt, sofern nicht anders angege-ben, ca. 1
Woche ab Ihrer Auftragserteilung.The time of delivery is about 1
week from placing order unless otherwise indicated.
Versand und Verpackungsspesen für alle anderen Werkzeuge auf
Anfrage.forwarding and packaging costs for all other tools on
request.
Versandkosten außerhalb Österreichs auf Anfrage.forwarding
charges outside Austria on request.
SICHERHEITSHINWEIS: Die in diesem Katalog angeführten
Abkantwerkzeuge dürfen ausschließlich entspre-chend den gültigen
Sicherheitsbestimmungen im Land des Anwenders eingesetzt werden.
Abkantwerkzeuge dürfen nur in Maschinen eingesetzt werden, die
Schutzvorrichtungen aufweisen, die den Körper oder Körperteile vor
Quet-schungen und Scherungen zu jedem Zeitpunkt wirksam schützen.
Die Verantwortung dafür liegt beim Anwender, der sicher stellen
muss, dass alle notwendigen Sicherheitssysteme an der Maschine
angebaut und funktionstüchtig sind.SAFETY WARNING: The press brake
tools shown in this catalogue should be used in strict compliance
with all European safety standards. Press brake tools may be used
only in machines which are equiped with safety systems to protect
effectively the body or body parts from crushing and shearing at
any time. It is the users responsibility to make certain that point
of operation protection is effective and that all applicable safety
requirements are met.
-
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected] 11
1010/A/88°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 5,5 75,00L=835 mm 11,0 133,00L=835 mm geteilt/sectioned
11,0 247,00
1010/A/88°/0,8/105
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 8,5 129,00L=835 mm 17,0 228,00L=835 mm
geteilt/sectioned 17,0 380,00
OBERWERKZEUGE SYSTEM AMADA-PROMECAMUPPER TOOLS SYSTEM
AMADA-PROMECAM
-
12 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
1010/A/75°/08
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 5,5 104,00L=835 mm 11,0 186,00L=835 mm
geteilt/sectioned 11,0 285,00
Standardlängen: 835 mm, 415 mm, 835 mm geteiltstandard length:
835 mm, 415 mm, 835 mm sectioned
1010/A/85°/0,8
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 5,5 79,00L=835 mm 11,0 142,00L=835 mm geteilt/sectioned
11,0 258,00
1010/A/85°/0,8/105
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 8,5 129,00L=835 mm 17,0 228,00L=835 mm
geteilt/sectioned 17,0 380,00
-
13
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
1010/88°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 5,5 75,00L=835 mm 11,0 133,00L=835 mm geteilt/sectioned
11,0 247,00
1010/A/90°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 5,5 75,00L=835 mm 11,0 133,00L=835 mm geteilt/sectioned
11,0 247,00
1010/A/75°/0,8/105
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 8,5 144,00L=835 mm 17,0 272,00L=835 mm
geteilt/sectioned 17,0 388,00
-
14 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
1011/45°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 5,0 76,00L=835 mm 10,0 136,00L=835 mm geteilt/sectioned
10,0 253,00
Abkantwerkzeuge in bester Qualität: induktionsgehärtet,
Arbeitsflächen geschliffenMaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) auf AnfragePress brake
tools in best quality: induction hardened, grinded on the working
surfacesmaterial: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) on request
Material: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) auf AnfrageAbkantwerkzeuge in bester
Qualität: induktionsgehärtet, Arbeitsflächen geschliffenMaterial:
CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60
HRC) auf AnfragePress brake tools in best quality: induction
hardened, grinded on the working surfacesmaterial: CK 50 (50-52
HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on
requestPress brake tools in best quality: induction hardened,
grinded on the working surfacesmaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on request
1011/A/45°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 5,0 84,00L=835 mm 10,0 153,00L=835 mm geteilt/sectioned
10,0 269,00
1010/90°/0,8
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 5,5 75,00L=835 mm 11,0 133,00L=835 mm geteilt/sectioned
11,0 247,00
-
15
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
3864/35°/1
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 4,0 91,00L=835 mm 8,0 148,00L=835 mm geteilt/sectioned
8,0 247,00
1012/A/35°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 6,0 97,00L=835 mm 12,0 177,00L=835 mm geteilt/sectioned
12,0 295,00
1012/35°/1
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 6,0 89,00L=835 mm 12,0 161,00L=835 mm geteilt/sectioned
12,0 279,00
-
16 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
1014/A/75°/0,8
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 10,0 199,00L=835 mm 20,0 372,00L=835 mm
geteilt/sectioned 20,0 539,00
Standardlängen: 835 mm, 415 mm, 835 mm geteiltstandard length:
835 mm, 415 mm, 835 mm sectioned
1013
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 7,0 123,00L=835 mm 14,0 226,00L=835 mm
geteilt/sectioned 14,0 353,00
1014/88°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 10,5 153,00L=835 mm 21,0 283,00L=835 mm
geteilt/sectioned 21,0 428,00
-
17
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
1014/88°/0,8/6
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 9,5 164,00L=835 mm 19,0 288,00L=835 mm
geteilt/sectioned 19,0 429,00
1014/A/88°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 10,0 158,00L=835 mm 20,0 292,00L=835 mm
geteilt/sectioned 20,0 430,00
1014/A/88°/0,8/6
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 9,5 178,00L=835 mm 19,0 312,00L=835 mm
geteilt/sectioned 19,0 460,00
-
18 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
1015/A/88°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 11,5 164,00L=835 mm 23,0 305,00L=835 mm
geteilt/sectioned 23,0 457,00
1015/88°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 11,5 162,00L=835 mm 23,0 300,00L=835 mm
geteilt/sectioned 23,0 448,00
1014/90°/0,8
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 10,5 153,00L=835 mm 21,0 283,00L=835 mm
geteilt/sectioned 21,0 428,00
Abkantwerkzeuge in bester Qualität: induktionsgehärtet,
Arbeitsflächen geschliffenMaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) auf AnfragePress brake
tools in best quality: induction hardened, grinded on the working
surfacesmaterial: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) on request
Material: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) auf AnfrageAbkantwerkzeuge in bester
Qualität: induktionsgehärtet, Arbeitsflächen geschliffenMaterial:
CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60
HRC) auf AnfragePress brake tools in best quality: induction
hardened, grinded on the working surfacesmaterial: CK 50 (50-52
HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on
requestPress brake tools in best quality: induction hardened,
grinded on the working surfacesmaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on request
-
19
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
1017/26°/0,8
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 7,5 120,00L=835 mm 15,0 226,00L=835 mm
geteilt/sectioned 15,0 350,00
1015/90°/1
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 11,5 162,00L=835 mm 23,0 300,00L=835 mm
geteilt/sectioned 23,0 448,00
1016/α/0,6
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 8,0 162,00L=835 mm 16,0 302,00L=835 mm
geteilt/sectioned 16,0 456,00
-
20 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
Standardlängen: 835 mm, 415 mm, 835 mm geteiltstandard length:
835 mm, 415 mm, 835 mm sectioned
1017/35°/0,8
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 6,5 116,00L=835 mm 13,0 199,00
1018/60°/0,8
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 4,5 85,00L=835 mm 9,0 153,00L=835 mm geteilt/sectioned
9,0 251,00
1017/A/30°/0,8/W
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 8,0 446,00L=835 mm 16,0 811,00L=835 mm
geteilt/sectioned 16,0 1008,00
-
21
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
1020/A/88°/0,2
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 12,5 302,00L=835 mm 25,0 583,00L=835 mm
geteilt/sectioned 25,0 726,00
1019/A/88°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 6,0 129,00L=835 mm 12,0 235,00L=835 mm
geteilt/sectioned 12,0 356,00
1020/A/75°/0,8
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 12,5 318,00L=835 mm 25,0 613,00L=835 mm
geteilt/sectioned 25,0 781,00
-
22 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
1022/A/75°/0,8
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 4,5 131,00L=835 mm 9,0 240,00L=835 mm geteilt/sectioned
9,0 347,00
1022/A/88°/0,2
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 4,5 110,00L=835 mm 9,0 204,00L=835 mm geteilt/sectioned
9,0 329,00
1021/A/30°/0,8
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 7,5 117,00L=835 mm 15,0 217,00L=835 mm
geteilt/sectioned 15,0 342,00
Abkantwerkzeuge in bester Qualität: induktionsgehärtet,
Arbeitsflächen geschliffenMaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) auf AnfragePress brake
tools in best quality: induction hardened, grinded on the working
surfacesmaterial: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) on request
Material: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) auf AnfrageAbkantwerkzeuge in bester
Qualität: induktionsgehärtet, Arbeitsflächen geschliffenMaterial:
CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60
HRC) auf AnfragePress brake tools in best quality: induction
hardened, grinded on the working surfacesmaterial: CK 50 (50-52
HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on
requestPress brake tools in best quality: induction hardened,
grinded on the working surfacesmaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on request
-
23
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
1024/A/88°/0,2
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 5,5 139,00L=835 mm 11,0 241,00L=835 mm
geteilt/sectioned 11,0 366,00
1023/A/88°/0,2
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 4,5 110,00L=835 mm 9,0 204,00L=835 mm geteilt/sectioned
9,0 329,00
1023/A/90°/0,2
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 4,5 110,00L=835 mm 9,0 204,00L=835 mm geteilt/sectioned
9,0 329,00
-
24 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
Standardlängen: 835 mm, 415 mm, 835 mm geteiltstandard length:
835 mm, 415 mm, 835 mm sectioned
1026/α/0,2
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 5,0 117,00L=835 mm 10,0 188,00L=835 mm
geteilt/sectioned 10,0 331,00
1027/A/30°/0,8
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 7,0 117,00L=835 mm 14,0 217,00L=835 mm
geteilt/sectioned 14,0 342,00
1025/A/88°/0,2
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 5,0 117,00L=835 mm 10,0 188,00L=835 mm
geteilt/sectioned 10,0 331,00
-
25
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
1030/A/88°/0,8
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 20,0 597,00L=835 mm 40,0 1.138,00L=835 mm
geteilt/sectioned 40,0 1.356,00
1028/A/88°/0,8
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 19,0 513,00L=835 mm 38,0 972,00L=835 mm
geteilt/sectioned 38,0 1.232,00
1029/A/85°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 12,0 247,00L=835 mm 24,0 459,00L=835 mm
geteilt/sectioned 24,0 627,00
-
26 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
INDUKTIONSGEHÄRTET
1031/A/60°/0,8
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 7,5 276,00L=835 mm 15,0 517,00L=835 mm
geteilt/sectioned 15,0 789,00
1033/A/28°/0,6
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 8,5 284,00L=835 mm 17,0 526,00L=835 mm
geteilt/sectioned 17,0 743,00
1032/A/88°/0,8
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 12,5 437,00L=835 mm 25,0 790,00L=835 mm
geteilt/sectioned 25,0 1.003,00
Abkantwerkzeuge in bester Qualität: induktionsgehärtet,
Arbeitsflächen geschliffenMaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) auf AnfragePress brake
tools in best quality: induction hardened, grinded on the working
surfacesmaterial: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) on request
Material: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) auf AnfrageAbkantwerkzeuge in bester
Qualität: induktionsgehärtet, Arbeitsflächen geschliffenMaterial:
CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60
HRC) auf AnfragePress brake tools in best quality: induction
hardened, grinded on the working surfacesmaterial: CK 50 (50-52
HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on
requestPress brake tools in best quality: induction hardened,
grinded on the working surfacesmaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on request
-
27
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
1034/A/85°/2
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 19,0 643,00L=835 mm 38,0 1.230,00L=835 mm
geteilt/sectioned 38,0 1.538,00
1035/A/85°/1,25
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 30,0 923,00L=835 mm 60,0 1.790,00L=835 mm
geteilt/sectioned 60,0 2.265,00
1036/A/60°/0,8
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 12,0 364,00L=835 mm 24,0 670,00L=835 mm
geteilt/sectioned 24,0 980,00
-
28 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
1037/A/60°/2
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 12,0 364,00L=835 mm 24,0 670,00L=835 mm
geteilt/sectioned 24,0 980,00
1038/A/26°/0,8
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 11,0 364,00L=835 mm 22,0 670,00L=835 mm
geteilt/sectioned 22,0 980,00
1039/A/26°/1,5
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 11,0 364,00L=835 mm 22,0 670,00L=835 mm
geteilt/sectioned 22,0 980,00
Standardlängen: 835 mm, 415 mm, 835 mm geteiltstandard length:
835 mm, 415 mm, 835 mm sectioned
-
29
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
4003
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 8,0 318,00L=835 mm 16,0 568,00
4004
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 13,0 421,00L=835 mm 26,0 774,00
4005
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 5,0 67,00L=830 mm 10,0 107,00
-
30 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
4002
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 1,5 93,00L=835 mm 3,0 154,00
Standardteilungstandard sectioning
4009/R
Radius 7,5 10,0 12,5 15,0 17,5L=415 mmGewicht / weight [kg] 0,8
1,0 1,7 2,5 2,8Preis / price [€] 69,00 60,00 52,00 64,00 61,00
L=835 mmGewicht / weight [kg] 1,6 2,0 3,4 5,0 5,6Preis / price
[€] 119,00 93,00 98,00 102,00 116,00
Radius 20,0 25,0 30,0 40,0 50,0L=415 mm Gewicht / weight [kg]
3,2 5,0 7,0 11,0 15,0Preis / price [€] 73,00 81,00 90,00 146,00
256,00
L=835 mmGewicht / weight [kg] 6,4 10,0 14,0 22,0 30,0Preis /
price [€] 118,00 134,00 153,00 260,00 452,00
Abkantwerkzeuge in bester Qualität: induktionsgehärtet,
Arbeitsflächen geschliffenMaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) auf AnfragePress brake
tools in best quality: induction hardened, grinded on the working
surfacesmaterial: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) on request
Material: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) auf AnfrageAbkantwerkzeuge in bester
Qualität: induktionsgehärtet, Arbeitsflächen geschliffenMaterial:
CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60
HRC) auf AnfragePress brake tools in best quality: induction
hardened, grinded on the working surfacesmaterial: CK 50 (50-52
HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on
requestPress brake tools in best quality: induction hardened,
grinded on the working surfacesmaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on request
-
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected] 31
2008
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 10,0 117,00L=835 mm 20,0 197,00L=835 mm
geteilt/sectioned 20,0 341,00
UNTERWERKZEUGE SYSTEM AMADA-PROMECAMLOWER TOOLS SYSTEM
AMADA-PROMECAM
2009
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 8,5 143,00L=835 mm 17,0 259,00L=835 mm
geteilt/sectioned 17 ,0 384,00
2009/85°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 8,5 143,00L=835 mm 17,0 259,00L=835 mm
geteilt/sectioned 17 ,0 384,00
-
32 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
2011/A/18/30°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 11,0 117,00L=835 mm 22,0 214,00
Standardlängen: 835 mm, 415 mm, 835 mm geteiltstandard length:
835 mm, 415 mm, 835 mm sectioned
2009/SPEC
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 10,5 199,00L=835 mm 21,0 371,00L=835 mm
geteilt/sectioned 21,0 496,00
2009/60°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 9,0 190,00L=835 mm 18,0 346,00L=835 mm
geteilt/sectioned 18 ,0 472,00
-
33
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
2011/32/85°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 10,5 102,00L=835 mm 21,0 178,00
2011/A/32/45°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 11,0 125,00L=835 mm 22,0 234,00
2011/40/45°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 14,0 240,00L=835 mm 28,0 437,00
-
34 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
2011/50/85°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 10,5 102,00L=835 mm 21,0 178,00
2011/40/85°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 10,5 102,00L=835 mm 21,0 178,00
2011/50/45°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 14,0 380,00L=835 mm 28,0 680,00
Abkantwerkzeuge in bester Qualität: induktionsgehärtet,
Arbeitsflächen geschliffenMaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) auf AnfragePress brake
tools in best quality: induction hardened, grinded on the working
surfacesmaterial: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) on request
Material: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) auf AnfrageAbkantwerkzeuge in bester
Qualität: induktionsgehärtet, Arbeitsflächen geschliffenMaterial:
CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60
HRC) auf AnfragePress brake tools in best quality: induction
hardened, grinded on the working surfacesmaterial: CK 50 (50-52
HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on
requestPress brake tools in best quality: induction hardened,
grinded on the working surfacesmaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on request
-
35
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
2011/A/63/85°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 15,0 183,00L=835 mm 30,0 320,00
2011/63/60°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 17,0 299,00L=835 mm 34,0 556,00
2011/80/45°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 45,0 684,00L=835 mm 90,0 1.187,00
-
36 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
Standardlängen: 835 mm, 415 mm, 835 mm geteiltstandard length:
835 mm, 415 mm, 835 mm sectioned
2011/80/85°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 17,5 239,00L=835 mm 35,0 410,00
2011/100/85°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 25,0 295,00L=835 mm 50,0 502,00
2011/80/60°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 17,5 602,00L=835 mm 35,0 1.150,00
-
37
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
2012/A/90°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 4,0 99,00L=835 mm 8,0 179,00
2011/125/80°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 33,0 376,00L=835 mm 60,0 725,00
2012/90°/88°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 4,5 67,00L=835 mm 9,0 125,00
-
38 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
2012/60°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 4,5 72,00L=835 mm 9,0 133,00
2013/90°/88°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 4,5 67,00L=835 mm 9,0 125,00
2012/35°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 5,0 78,00L=835 mm 10,0 143,00
Abkantwerkzeuge in bester Qualität: induktionsgehärtet,
Arbeitsflächen geschliffenMaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) auf AnfragePress brake
tools in best quality: induction hardened, grinded on the working
surfacesmaterial: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) on request
Material: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) auf AnfrageAbkantwerkzeuge in bester
Qualität: induktionsgehärtet, Arbeitsflächen geschliffenMaterial:
CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60
HRC) auf AnfragePress brake tools in best quality: induction
hardened, grinded on the working surfacesmaterial: CK 50 (50-52
HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on
requestPress brake tools in best quality: induction hardened,
grinded on the working surfacesmaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on request
-
39
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
2013/35°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 5,0 78,00L=835 mm 10,0 143,00
2013/60°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 4,5 72,00L=835 mm 9,0 133,00
2013/A/90°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 4,0 99,00L=835 mm 8,0 179,00
-
40 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
Standardlängen: 835 mm, 415 mm, 835 mm geteiltstandard length:
835 mm, 415 mm, 835 mm sectioned
2014/A/88°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 4,0 99,00L=835 mm 8,0 179,00
2014/88°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 4,5 67,00L=835 mm 9,0 125,00
2014/60°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 5,5 78,00L=835 mm 11,0 143,00
-
41
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
2015/60°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 5,5 78,00L=835 mm 11,0 143,00
2015/88°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 4,5 67,00L=835 mm 9,0 125,00
2015/A/88°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 4,0 99,00L=835 mm 8,0 179,00
-
42 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
2017/α
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 10,0 153,00L=835 mm 20,0 265,00L=835 mm
geteilt/sectioned 20,0 391,00
2016/α
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 10,0 153,00L=835 mm 20,0 265,00L=835 mm
geteilt/sectioned 20,0 391,00
2030/30°
Gewicht / weight [kg]
Preis / price [€]
H = 80 mmL=415 mm 6,5 - 10,0 154,00L=835 mm 13,0 - 20,0
292,00L=835 mm geteilt/sectioned 13,0 - 20,0 409,00
H = 120 mmL=415 mm 8,5 - 16,0 244,00L=835 mm 17,0 - 32,0
462,00L=835 mm geteilt/sectioned 17,0 - 32,0 599,00
Abkantwerkzeuge in bester Qualität: induktionsgehärtet,
Arbeitsflächen geschliffenMaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) auf AnfragePress brake
tools in best quality: induction hardened, grinded on the working
surfacesmaterial: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) on request
Material: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) auf AnfrageAbkantwerkzeuge in bester
Qualität: induktionsgehärtet, Arbeitsflächen geschliffenMaterial:
CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60
HRC) auf AnfragePress brake tools in best quality: induction
hardened, grinded on the working surfacesmaterial: CK 50 (50-52
HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on
requestPress brake tools in best quality: induction hardened,
grinded on the working surfacesmaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on request
-
43
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
2035/35°
Gewicht / weight [kg]
Preis / price [€]
H = 80 mmL=415 mm 6,5 / 8,0 146,00L=835 mm 13,0 / 16,0
265,00L=835 mm geteilt/sectioned 13,0 / 16,0 383,00
H = 120 mmL=415 mm 8,5 / 11,0 234,00L=835 mm 17,0 / 22,0
440,00L=835 mm geteilt/sectioned 17,0 / 22,0 577,00
2045/45°
Gewicht / weight [kg]
Preis / price [€]
H = 80 mmL=415 mm 7,5 - 10,0 154,00L=835 mm 15,0 - 20,0
292,00L=835 mm geteilt/sectioned 15,0 - 20,0 409,00
H = 120 mmL=415 mm 9,0 - 15,0 244,00L=835 mm 18,0 - 30,0
462,00L=835 mm geteilt/sectioned 18,0 - 30,0 599,00
2060/60°
Gewicht / weight [kg]
Preis / price [€]
H = 80 mmL=415 mm 7,5 - 10,0 154,00L=835 mm 15,0 - 20,0
292,00L=835 mm geteilt/sectioned 15,0 - 20,0 409,00
H = 120 mmL=415 mm 9,0 - 15,0 244,00L=835 mm 18,0 - 30,0
462,00L=835 mm geteilt/sectioned 18,0 - 30,0 599,00
-
44 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
Standardlängen: 835 mm, 415 mm, 835 mm geteiltstandard length:
835 mm, 415 mm, 835 mm sectioned
2090/90°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 7,0 - 7,5 126,00L=835 mm 14,0 - 15,0 232,00L=835 mm
geteilt/sectioned 14,0 - 15,0 360,00
2130/A/30°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 3,0 - 6,0 176,00L=835 mm 6,0 - 12,0 329,00L=835 mm
geteilt/sectioned 6,0 - 12,0 450,00
2088/88°
Gewicht / weight [kg]
Preis / price [€]
H = 80 mmL=415 mm 7,0 - 10,0 148,00L=835 mm 14,0 - 20,0
265,00L=835 mm geteilt/sectioned 14,0 - 20,0 414,00
H = 120 mmL=415 mm 8,5 - 15,0 215,00L=835 mm 17,0 - 30,0
403,00L=835 mm geteilt/sectioned 17,0 - 30,0 545,00
-
45
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
2019/A/α
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 4,7 134,00L=835 mm 9,5 250,00L=835 mm geteilt/sectioned
9,5 366,00
2188/A/88°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 3,0 - 4,0 145,00L=835 mm 6,0 - 8,0 260,00L=835 mm
geteilt/sectioned 6,0 - 8,0 376,00
2190/A/90°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 3,0 - 3,5 145,00L=835 mm 6,0 - 7,0 260,00L=835 mm
geteilt/sectioned 6,0 - 7,0 376,00
-
46 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
2021/A/α
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 5,2 134,00L=835 mm 10,5 250,00L=835 mm
geteilt/sectioned 10,5 366,00
2020/A/α
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 5,0 134,00L=835 mm 10,0 250,00L=835 mm
geteilt/sectioned 10,0 366,00
2022/A/88°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 5,2 134,00L=835 mm 10,5 250,00L=835 mm
geteilt/sectioned 10,5 366,00
Abkantwerkzeuge in bester Qualität: induktionsgehärtet,
Arbeitsflächen geschliffenMaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) auf AnfragePress brake
tools in best quality: induction hardened, grinded on the working
surfacesmaterial: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) on request
Material: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) auf AnfrageAbkantwerkzeuge in bester
Qualität: induktionsgehärtet, Arbeitsflächen geschliffenMaterial:
CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60
HRC) auf AnfragePress brake tools in best quality: induction
hardened, grinded on the working surfacesmaterial: CK 50 (50-52
HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on
requestPress brake tools in best quality: induction hardened,
grinded on the working surfacesmaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on request
-
47
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
2025/A/30°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 6,5 163,00L=835 mm 13,0 307,00L=835 mm
geteilt/sectioned 13,0 423,00
2023/A/88°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 6,0 134,00L=835 mm 12,0 250,00L=835 mm
geteilt/sectioned 12,0 366,00
2024/A/88°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 6,0 134,00L=835 mm 12,0 250,00L=835 mm
geteilt/sectioned 12,0 366,00
-
48 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
2026/A/30°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 6,5 163,00L=835 mm 13,0 307,00L=835 mm
geteilt/sectioned 13,0 423,00
2028/A/75°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 6,0 151,00L=835 mm 12,0 283,00L=835 mm
geteilt/sectioned 12,0 400,00
2027/A/75°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 6,0 151,00L=835 mm 12,0 283,00L=835 mm
geteilt/sectioned 12,0 400,00
Standardlängen: 835 mm, 415 mm, 835 mm geteiltstandard length:
835 mm, 415 mm, 835 mm sectioned
-
49
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
2030/A/75°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 6,5 151,00L=835 mm 13,0 283,00L=835 mm
geteilt/sectioned 13,0 400,00
2029/A/75°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 6,2 151,00L=835 mm 12,5 283,00L=835 mm
geteilt/sectioned 12,5 400,00
Standardteilungstandard sectioning
-
50 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
3000
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 14,0 240,00L=835 mm 28,0 440,00L=835 mm
geteilt/sectioned 28,0 594,00
1033/A/28°/0,6
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 8,5 284,00L=835 mm 17,0 526,00L=835 mm
geteilt/sectioned 17,0 743,00
ZUDRÜCKWERKZEUGE EINFACHHAMMING TOOLS SIMPLE
INDUKTIONSGEHÄRTET
INDUKTIONSGEHÄRTET
INDUKTIONSGEHÄRTET
-
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected] 51
3001/12/26°
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 21,0 440,00L=835 mm 42,0 760,00
3001/35°/A
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 16,0 360,00L=835 mm 32,0 620,00
ZUDRÜCKWERKZEUGE MIT FEDERÖFFNUNGHAMMING TOOLS WITH SPRING
OPENING
3001/35°/B
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 16,0 360,00L=835 mm 32,0 620,00
-
52 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
PNEUMATIKEINHEITPNEUMATIC KIT
Gewicht / weight [kg] Preis / price [€]3,5 230
3001/8/30°/PN
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 16,5 847,00L=835 mm 33,0 1.095,00
3001
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 20,0 - 21,0 388,00L=835 mm 40,0 - 42,0 698,00
Standardlängen: 835 mm, 415 mm, 835 mm geteiltstandard length:
835 mm, 415 mm, 835 mm sectioned
ZUDRÜCKWERKZEUGE PNEUMATISCHHAMMING TOOLS PNEUMATIC
-
53
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
3001/PN
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 20,0 - 21,0 924,00L=835 mm 40,0 - 42,0 1.170,00
3001/12/26°/PN
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 21,0 990,00L=835 mm 42,0 1.300,00
3001/8/35°/PN
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 16,5 847,00L=835 mm 33,0 1.095,00
-
54 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
3007
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 5,0 441,00L=835 mm 10,0 702,00
3006
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 18,0 838,00L=835 mm 36,0 1.467,00
Z-WERKZEUGE (PRÄGEWERKZEUGE)Z-TOOLS (EMBOSSING TOOLS)
-
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected] 55
INT. 1/STD
Gewicht / weight [kg] Preis / price [€]3,3 61,00
INT. 1/SECURITY/TALL
Gewicht / weight [kg] Preis / price [€]5,5 101,00
OBERWERKZEUGAUFNAHMENUPPER TOOL CLAMPINGS
Preise ohne Klemmplatten - siehe Seite 59prices without clamps -
look page 59
INT. 1/SECURITY
Gewicht / weight [kg] Preis / price [€]3,5 72,00
-
56 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
INT. 1/SEC/120
Gewicht / weight [kg] Preis / price [€]6,5 110,00
INT. AM
Gewicht / weight [kg] Preis / price [€]6,5 134,00
Preise ohne Klemmplatten - siehe Seite 59prices without clamps -
look page 59
INT. 2
Gewicht / weight [kg] Preis / price [€]5,0 146,00
Standardlängen: 835 mm, 415 mm, 835 mm geteiltstandard length:
835 mm, 415 mm, 835 mm sectioned
-
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected] 57
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
INT. 3
Gewicht / weight [kg] Preis / price [€]5,0 131,00
INT. 4
Gewicht / weight [kg] Preis / price [€]5,0 123,00
INT. 5
Gewicht / weight [kg] Preis / price [€]5,0 123,00
Preise ohne Klemmplatten - siehe Seite 59prices without clamps -
look page 59
-
58 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
INT. 6
Gewicht / weight [kg] Preis / price [€]5,0 140,00
HYDRAULISCHE KLEMMPLATTEHYDRAULIC CLAMP
Gewicht / weight [kg] Preis / price [€]1,5 315,00
HYDRAULIKAGGREGATHYDRAULIC UNIT
auf Anfrageon request 2.630,00
SCHRAUBE MIT FEDERfür Klemmplatten
SCREW WITH SPRINGfor clamping plate
Gewicht / weight [kg] Preis / price [€]0,3 6,00
Preise ohne Klemmplatten - siehe Seite 59prices without clamps -
look page 59
Abkantwerkzeuge in bester Qualität: induktionsgehärtet,
Arbeitsflächen geschliffenMaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) auf AnfragePress brake
tools in best quality: induction hardened, grinded on the working
surfacesmaterial: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) on request
Material: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) auf AnfrageAbkantwerkzeuge in bester
Qualität: induktionsgehärtet, Arbeitsflächen geschliffenMaterial:
CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60
HRC) auf AnfragePress brake tools in best quality: induction
hardened, grinded on the working surfacesmaterial: CK 50 (50-52
HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on
requestPress brake tools in best quality: induction hardened,
grinded on the working surfacesmaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on request
-
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected] 59
SCHNELL-SICHERHEITSKLEMMPLATTEQUICK RELEASE SECURITY CLAMP
6002/CL/QR
Gewicht / weight [kg] Preis / price [€]0,7 24,00
SCHNELL-SICHERHEITSKLEMMPLATTEmit Kunststoffeinlage für geteilte
Werkzeuge
QUICK RELEASE SECURITY CLAMPwith rubber blocking for segmented
tools
6004/CL/S+R
Gewicht / weight [kg] Preis / price [€]0,7 31,00
SICHERHEITSKLEMMPLATTESECURITY CLAMP
6001/CL/STD/S
Gewicht / weight [kg] Preis / price [€]0,4 17,00
STANDARD KLEMMPLATTESTANDARD CLAMP
6000/CL/STD
Gewicht / weight [kg] Preis / price [€]0,3 11,00
SICHERHEITSKLEMMPLATTEmit Kunststoffeinlage für geteilte
Werkzeuge
SECURITY CLAMPwith rubber blocking for segmented tools
6001/CL/STD/S/R
Gewicht / weight [kg] Preis / price [€]0,4 25,00
KLEMMPLATTENCLAMPS
-
60 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
4008
Gewicht / weight [kg]
Preis / price [€]
L=412 mm 9,0 121,00L=830 mm 18,0 202,00
4006
Gewicht / weight [kg]
Preis / price [€]
L=412 mm 4,5 63,00L=830 mm 9,0 100,00
4006/A
L=412 mm 5,0 72,00L=830 mm 10,0 116,00
MATRIZENAUFNAHMENLOWER TOOL CLAMPINGS
4007
Gewicht / weight [kg]
Preis / price [€]
L=412 mm 7,5 76,00L=830 mm 14,0 123,00
4007/A
L=412 mm 6,5 82,00L=830 mm 13,0 138,00
-
61
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
4015
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 7,0 142,00L=835 mm 14,0 260,00
4018
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 14,0 157,00L=835 mm 28,0 264,00
4017
Gewicht / weight [kg]
Preis / price [€]
H = 31 mmL=415 mm 8,0 161,00L=835 mm 16,0 320,00H = 61,5 mmL=415
mm 10,5 172,00L=835 mm 21,0 353,00
-
62 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
4011
Gewicht / weight [kg]
Preis / price [€]
L=415 mm 4,0 96,00L=835 mm 8,0 164,00
4016
Gewicht / weight [kg]
Preis / price [€]
L=1.050 mm 17,0 260,00
4010
Gewicht / weight [kg]
Preis / price [€]
L=835 mm 1,5 63,00L=835 mm 3,0 100,00
Abkantwerkzeuge in bester Qualität: induktionsgehärtet,
Arbeitsflächen geschliffenMaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) auf AnfragePress brake
tools in best quality: induction hardened, grinded on the working
surfacesmaterial: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) on request
Material: CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 -
(42CrMo4) - (53-60 HRC) auf AnfrageAbkantwerkzeuge in bester
Qualität: induktionsgehärtet, Arbeitsflächen geschliffenMaterial:
CK 50 (50-52 HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60
HRC) auf AnfragePress brake tools in best quality: induction
hardened, grinded on the working surfacesmaterial: CK 50 (50-52
HRC) UNI EN 100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on
requestPress brake tools in best quality: induction hardened,
grinded on the working surfacesmaterial: CK 50 (50-52 HRC) UNI EN
100083/1 - ISO 683 - (42CrMo4) - (53-60 HRC) on request
-
63
PREISE exkl. 20 % Mwst, exkl. Verpackungsspesen, ab Werk
ItalienPRICES excl. 20 % VAT, excl. packaging expenses, ex works
Italy
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
4014/A
Gewicht / weight [kg]
Preis / price [€]
L=1.000 mm auf Anfrage / on request 2.279,00
4014
Gewicht / weight [kg]
Preis / price [€]
L=1.000 mm auf Anfrage / on request 2.297,00
System WILA Typ A
Gewicht / weight [kg]
Preis / price [€]
L=1.000 mm 17,0 350,00
-
64 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
BIEGETABELLEBENDING CHART
ton
V = Matrizenöffnung / die opening [mm]R = Radius / radius [mm]B
= Restschenkellänge / rest leg length [mm]S = Blechdicke / sheet
metal thickness [mm]F = benötigte Biegekraft / needed bending force
[ton/m]
-
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected] 65
Maschine/ machine 86° 60° 45° 30°
Zudrück-werkzeug
/ ham-ming tool
Matrizenblock / die block
2050 mm x 35 ton € 1.350,00 € 1.150,00 € 1.150,00 € 1.210,00 €
1.150,00 € 1.470,002550 mm x 60 ton € 2.180,00 € 1.850,00 €
1.850,00 € 1.960,00 € 1.850,00 € 2.130,002550 mm x 80 ton €
2.180,00 € 1.850,00 € 1.850,00 € 1.960,00 € 1.850,00 € 2.130,003050
mm x 80 ton € 2.560,00 € 2.170,00 € 2.170,00 € 2.300,00 € 2.170,00
€ 2.570,003050 mm x 120 ton € 2.780,00 € 2.270,00 € 2.270,00 €
2.400,00 € 2.270,00 € 3.070,003050 mm x 160 ton € 2.770,00 €
2.350,00 € 2.350,00 € 2.490,00 € 2.350,00 € 3.400,003550 mm x 160
ton € 3.160,00 € 2.690,00 € 2.690,00 € 2.850,00 € 2.690,00 €
3.950,003700 mm x 160 ton € 3.350,00 € 2.850,00 € 2.850,00 €
3.020,00 € 2.850,00 € 4.170,004050 mm x 160 ton € 3.610,00 €
3.060,00 € 3.060,00 € 3.250,00 € 3.060,00 € 4.480,003050 mm x 200
ton € 2.870,00 € 2.440,00 € 2.440,00 € 2.580,00 € 2.440,00 €
3.750,003550 mm x 200 ton € 3.330,00 € 2.830,00 € 2.830,00 €
3.000,00 € 2.830,00 € 4.330,003700 mm x 200 ton € 3.520,00 €
3.000,00 € 3.000,00 € 3.170,00 € 3.000,00 € 4.570,004050 mm x 200
ton € 3.770,00 € 3.210,00 € 3.210,00 € 3.400,00 € 3.210,00 €
4.920,003050 mm x 300 ton € 3.010,00 € 2.560,00 € 2.560,00 €
2.720,00 € 2.560,00 € 4.610,004050 mm x 300 ton € 3.940,00 €
3.350,00 € 3.350,00 € 3.540,00 € 3.350,00 € 5.810,004050 mm x 400
ton € 4.560,00 € 3.870,00 € 3.870,00 € 4.100,00 € 3.870,00 €
6.360,006050 mm x 300 ton € 6.050,00 € 5.150,00 € 5.150,00 €
5.450,00 € 5.150,00 € 8.650,003050 mm x 400 ton € 6.870,00 €
5.840,00 € 5.840,00 € 6.180,00 € 5.840,00 € 9.420,00Gewicht auf
Anfrage / weight on request Preise ab Werk Deutschland / prices ex
works Germany
Material: 1.2312, vergütet auf 1000-1200 N/mm²Ausführung:
gefräst, geschlichtetAufpreis für geschliffene Ausführung: + 10
%härten auf Wunsch gegen Aufpreismaterial: 1.2312, quenched and
tempered to 1000 up to 1200 N/mm²style: milled, planedextra charge
for grounded style: + 10 %hardening optional at extra costAufpreis
für Teilung: € 39,50 pro Teilungextra charge for sectioning: €
39,50 per sectioningStandardteilung für 3 m Werkzeug: 35 / 40 / 45
/ 50 / 55 / 60 / 70 / 100 / 200 / 400 / 800 / Reststückstandard
sectioning for 3 m tool: 35 / 40 / 45 / 50 / 55 / 60 / 70 / 100 /
200 / 400 / 800 / rest piecejede beliebige Teilung erhältlich /
each sectioning available
STANDARD ABKANTWERKZEUGE SYSTEM HESSESTANDARD PRESS BRAKE TOOLS
SYSTEM HESSE
RICHTPREISE (Gerne erstellen wir ein Angebot nach Ihren
Angaben/Zeichnung):GUIDING PRICES (We‘re glad to make an offer
according to your specifi cations/drawing):
-
66 Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected]
SONDERWERKZEUGESPECIAL TOOLS
Wir fertigen Abkantwerkzeuge nach Ihren Zeichnungen in höchster
Qualität und Präzision.Senden Sie uns einfach Ihre
Werkzeugzeichnung und wir erstellen Ihnen ein unverbindliches und
kostenloses Angebot.
We manufacture press brake tools according to your drawings in
highest quality and precision.Please send us your tool sketches and
we provide you an free non-binding offer.
-
Tel. +43/2236/638 70-0, Fax +43/2236/636 62, offi
[email protected] 67
NACHARBEITENTOUCH UP WORKS
MESSERSCHLEIFENREGRIND SHEAR BLADES
KUNDENDIENSTCUSTOMER SERVICE
Wir arbeiten Ihre Abkantwerkzeuge bis zu einer Länge von 6 m in
einer Aufspannung äußerst präzise nach oder ändern diese gemäß
Ihren Wünschen um.We most accurate rework your press brake tools up
to a length of 6 m in one single clamping or alter them according
to your wishes.
€ 105,00 pro Arbeitsstunde€ 105,00 each working hour
Wir schleifen Ihre Scherenmesser nach!We regrind your shearing
blades!
€ 270,00 - € 310,00pro Doppelmeterje nach Aufwand€ 270,00 - €
310,00each double meteraccording to effort
event. Schartenreparatur nach Aufwandpossible notch repair
accor-ding to effort
Unser Kundendienst führt neben Inbetriebnahmen und Einschulungen
auch Instandsetzungen und Servicearbeiten an Eigen- sowie an
Fremdprodukten durch.Wir beschäftigen 7 Servicetechniker, die in
der Lage sind mechanische, hydraulische,elektrische und
elektronische Probleme zu lösen.Vertrauen Sie auf mehr als 60 Jahre
Erfahrung von HESSE+CO.
Our customer service carry out installations, trainings, repair
and service works at our ownproducts as well as on external
products.We currently employ 7 service engineers which are able to
solve mechanical, hydraulic,electric and electronic problems.Trust
in more than 60 years of experience of HESSE+CO.
Wir fertigen auch NEUE MESSER für Sie an!We also manufacture NEW
BLADES for you!
-
ww
w.h
esse
-mas
chin
en.c
om
Eine Übersicht über unser Lieferprogramm sowie eine täglich
aktualisierte Liste aller lagernden Neu- und Gebrauchtmaschinen
können Sie unserer Homepage entnehmen.
Bitte fragen Sie auch Maschinen an, die Sie nicht in unserer
Liste fi nden!On our Homepage you can view our delivery program as
well as a daily updated list of all new and used machines which are
on stock.
Please also request machines which are not listed!
Ihr HESSE+CO TeamYours HESSE+CO team
HESSE+CO Maschinenfabrik GmbHIndustriezentrum NÖ-SüdStrasse 4
Objekt 82351 Wiener NeudorfAUSTRIA
Tel.: +43/2236/638 70-0Fax: +43/2236/636 62
offi [email protected]
www.blechpower.com
NEU- UND GEBRAUCHTMASCHINENNEW AND USED MACHINES