AB1000-POE SERIES UNMANAGED INDUSTRIAL GIGABIT POE ETHERNET SWITCHES Zum Hagenbach 7 • D-48366 Laer • Fon: +49 (0)2554/9130-00 • Fax: +49 (0)2554/9130-10 • [email protected]www.welotec.com CAT-AB1000-V1 EN ed. 05/16 Welotec GmbH 1 GENERAL DATA AB1000-POE-21SFP-G03 AB1000-POE-42SFP-G06 AB1000-POE-82SFP-G10 Series AB1000 Type Unmanaged Ethernet layer Layer-2 Ports (total) 3 6 10 Copper ports 2 4 8 SFP ports 2 2 2 PoE ports 2 4 8 Connector TX RJ45 IEEE 802.3 10BaseT / CSMA/CD (Ethernet) IEEE 802.3i 10BaseT IEEE 802.3u 100BaseTX/T4/FX (Fast Ethernet) IEEE 802.3ab 1000BaseT(X) (Gigabit Ethernet over UTP) IEEE 802.3z 1000BaseF(X) (Gigabit Ethernet over Fiber) IEEE 802.3af Power over Ethernet (PoE) IEEE 802.3at Power over Ethernet Plus (PoE+) IEEE 802.3x Full Duplex and Flow Control Unmanaged Industrial Gigabit Switches with PoE. Two, four or eight 10/100/1000BaseTX PoE ports and one or two 10/100/1000 Mbps SFP ports are available depending on model. The Switches support the standards IEEE802.3af and IEEE802.3at for PoE and PoE+. The maximum PoE output power is 15.4 W at IEEE 802.3af and 30 W at IEEE 802.3at. The divices are ideally suited for DIN rail mounting.
5
Embed
AB1000-POE SEriES unmAnAgEd induStriAl gigABit POE ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
AB1000-POE SEriES unmAnAgEd induStriAl gigABit POE EthErnEt SwitchES
General Data aB1000-POe-21SFP-G03 aB1000-POe-42SFP-G06 aB1000-POe-82SFP-G10
Series AB1000
Type Unmanaged
Ethernet layer Layer-2
Ports (total) 3 6 10
Copper ports 2 4 8
SFP ports 2 2 2
PoE ports 2 4 8
Connector TX RJ45
IEEE 802.3 10BaseT / CSMA/CD (Ethernet)
IEEE 802.3i 10BaseT
IEEE 802.3u 100BaseTX/T4/FX (Fast Ethernet)
IEEE 802.3ab 1000BaseT(X) (Gigabit Ethernet over UTP)
IEEE 802.3z 1000BaseF(X) (Gigabit Ethernet over Fiber)
IEEE 802.3af Power over Ethernet (PoE)
IEEE 802.3at Power over Ethernet Plus (PoE+)
IEEE 802.3x Full Duplex and Flow Control
Unmanaged Industrial Gigabit Switches with PoE. Two, four or eight 10/100/1000BaseTX PoE ports and one or two 10/100/1000 Mbps SFP ports are available depending on model. The Switches support the standards IEEE802.3af and IEEE802.3at for PoE and PoE+. The maximum PoE output power is 15.4 W at IEEE 802.3af and 30 W at IEEE 802.3at. The divices are ideally suited for DIN rail mounting.
Please confirm the following things before installation:1. If the PoE port meets the power requirement of the connecting devices.2. If the PoE standard requirement and power supply matches with the power receiving device.
(1/2+ 3/6- (End-span) / 4/5+ 7/8- (Mid-span))3. If the output power of the matched power adapter is compatible with the specification in the label of the PoE switch.
Please install the PoE switch according to the following steps:1. Put the PoE switch on the surface of a large and stable table, or professional industrial installation rank mount. 2. Connect Positive, Minus and Earth terminals as indicators on the power adapter.3. Connect the network devices to the PoE switch port though network cable.
Note:1. Please do not put heavy products on the PoE switch, and please ensure good ventilation environment for the oE switch. 2. Please cut off the power first before plugging the power adapter.
Power:Connect the power cable, plug it into power socket, turn on the power, then the switch will automatically initialize, and LED lights status will display as following:1. Except the POE port lights, all the other lights will go through the process of “on-off-on-off”, which means the system
restoration is successful. 2. Power LED remains lit.
Note:If initialization is inconsistent with the above, please check the power.
leD inDicatOr StatuS DeScriPtiOn
PWR / SYSLED green ON Normal
LED green OFF Power OFF
PoE
LED green ON Connected to Powered Device (PD), PoE working properly
LED green Blink Short circuit or current overload
LED green OFF No connected Powered Device (PD) or PoE power OFF
LINK
LED yellow ON Link is OK
LED yellow Blink Link is OK and data is being sent and received
LED yellow OFF Link failure and no data transmission
L/A (SFP)
LED green ON Link is OK
LED green Blink Link is OK and data is being sent and received
LED green OFF Link failure and no data transmission
Note: Please confirm that the all PoE ports of PD devices are complying with IEEE802.3af/at standard.
Power Industrial Terminals: 48 V DC (46 - 57 V DC), More than 50VDC is recommended when used PoE+ output, 110 - 240 V AC, 50/60 Hz power supply
PoE-Port: The PoE ports support PoE function, which can transmit data and power simultaneously if connected matching device. The LED lights on the front panel can show working status of each port.
Ethernet-Ports: Besides PoE ports, other ports are normal self-sensing Ethernet RJ45 ports which support Auto MDI/MDIX, plug and play. The LED lights on the front panel can show working status of each port.