CUSTOMER SA TISFACTIO N EXCELLENC E OPERATIONAL Q & I 20 11 ICONIA tab A500 Diagnostic Tool SOP Release date : Apr. 14, 2011
Nov 11, 2014
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
ICONIA tab A500
Diagnostic Tool SOP
Release date : Apr. 14, 2011
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Preparation
Diagnostic tool - A500 Diagnostic Tool.zip
USB Driver of A500 for PC
USB cable
Micro SD card
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Tool installation
1. Install USB driver in PC/NB.2. Connect A500 device to PC/NB via USB cable3. Enable “USB debugging” in A500 (Settings Applications USB
debugging)
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Tool installation
4. Unzip file “A500 Diagnostic Tool.zip”. There are four files in the folder.
5. Run “Install_A500_DiagTool.bat”.
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Tool installation
6. The Apps in A500, it should have an application “ACTP”. It’s the diagnostic tool.
7. Please launch it to start the testing.
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Main Menu
In diagnostic tool, it can test Touch Panel, Display, Buttons, Speaker, MIC, Camera, SD and Vibrator functions. Select the function you want to test then tap “OK” to start.
Step 1 – Select the item
Step 2 – Tap “OK” to start testing
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Test item – 1.multituch1 (Touch Panel)
User your finger touch the yellow area as below screen and draw it alongthe square. The result is pass if you fill all yellow area then it backs to main menu.
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Test item – 2.TouchLinearity (Touch Panel)
User your finger touch the yellow area as below screen and draw it alongthe “X”. The result is pass if you fill all yellow area then it backs to main menu.
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Test item – 3.RGB (Display)
Continue to tap screen then display changes. Use this test item to verity any abnormal lines or dead pixels on LCD screen.
Finish
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Test item – 4.HWKeys Test (Keys)
Press volume up, volume down and lock keys to verify if all keys work. Color changes to green means key function works.
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Test item – 5.Back Camera
Take device rear side face to an object. Tap “Photograph” icon to test picture taking.
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Test item – 6.Speaker
Loud tone sounds in left speaker then switch to right speaker.
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Test item – 7.Front MIC
Tap screen start the test. When “Recording” screen appears, voice to device front side. Then check the voice if recorded when switching to “Playing” screen.
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Test item – 8.Rear MIC
Tap screen start the test. When “Recording” screen appears, voice to Device rear side. Then check the voice if recorded when switching to “Playing” screen.
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Test item – 9.Front Camera
Take device front side face to an object. Tap “Photograph” icon to test picture taking.
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Test item – 10.SD Card (SD read/write test)
Insert a micro SD card to device. Start the SD read and write test. It switches to success screen if pass the test.
System requests to insert a micro SD if you forget to insert a card.
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Test item – 11.Vibrator
It starts vibrating for two seconds then switches to success screen if pass the test.
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Un-installation procedure
It MUST uninstall diagnostic tool once the testing is done. DO NOTdisclose this tool out of service center.
Step 1Into “Running services” (Settings Applications Running services).
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Un-installation procedure
Step 2In “Running services”, select “All” and find the application “ACTP”.
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Un-installation procedure
Step 3In ACTP application, select “Uninstall” to remove the tool.
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Un-installation procedure
Step 4Select “OK” start to uninstall.
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Un-installation procedure
Step 5“Uninstall finished” message pop-up when the process is complete.
CUSTOM
ERSATISFACTION
EXCELLENCE OPERATIONAL
Q&
I20 11
Un-installation procedure
Step 6Final check if diagnostic tool “ACTP” has been removed in Apps.