A330 ETOPS PARTS LIST This issue of ETOPS PARTS LIST corresponds to A330 CMP Document Revision 23 dated 17 November 2011 (Applicable to all A330 models) - CMP Data Reference: “LR2/EASA : AMC 20-6/CMP” - Reference: AI/EA-O 418/0174/94 Iss 16 Issue date: 17 November 2011
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
A330 ETOPS PARTS LIST
This issue of ETOPS PARTS LIST corresponds to A330 CMP Document Revision 23 dated 17 November 2011 (Applicable to all A330 models)
- CMP Data Reference: “LR2/EASA : AMC 20-6/CMP” - Reference: AI/EA-O 418/0174/94 Iss 16 Issue date: 17 November 2011
i.1
1. Purpose:
To identify parts whose usage is restricted on ETOPS aircraft and to further categorize them into those authorized and not authorized on an aircraft dispatched for ETOPS operation.
2. Contents:
The parts list corresponds to Airbus A330 ETOPS Configuration, Maintenance and Procedures Document (CMP), CMP Data Reference: “LR2/EASA : AMC 20-6/CMP”, and a revision number, for A330 aircraft. The list relates the CMP item name, its associated modification number and service bulletin (SB) number, Airbus and/or vendor, to a parts listing which may or may not be used on an aircraft flying ETOPS. It also traces the history of each part group, through use of pre- and post-modification numbers. The part's list reference number, issue date and corresponding CMP reference are marked on each page. 3. Method used to create the parts list:
The parts list is created after the referenced CMP is issued. The modification number and/or service bulletin number is used as the starting point to identify the old and the new part numbers. Once identified, a part number search is performed using Airbus parts data base, the service bulletin and the modification dossier, to establish the part's family tree. The parts are then classified NOT APPROVED FOR ETOPS or MINIMUM STANDARD APPROVED FOR ETOPS. Those parts NOT APPROVED are all those which are the pre-modification standard or earlier. The parts APPROVED are all those which are the post modification standard or more advanced. An item which is the direct responsibility of a vendor (noted VIPC) or the engine manufacturer may not be listed or if it is listed, may not have a complete family tree due to the unavailability of the information at Airbus. Only part numbers of major components are identified. Support items for this component, i.e. brackets, washers, nuts, etc., are not listed. If an entire configuration was changed a major component in the system change is identified. If no major component exists, no part numbers are identified and the user must assure that the correct page in the IPC (noted by the major modification number) is used. Furthermore revised items in the parts list are written in red.
4. Cautions (list short falls):
The family trees identified are as complete as possible and may give part numbers, especially in the not approved listing, which are obsolete. On the other hand, the list may not state all of the approved ETOPS parts due to an evolution in the product's standard. It is up to each user to customize this list to its operation by using its customized IPC. This list also does not contain compatibility requirements. For instance, if a certain computer invalidates the usage of another computer, the second computer is not listed. It is up to the individual user to make this liaison using IPC codes. Part numbers authorized via accomplishment of a service bulletin, but not available as a spare, may not appear on this list. As long as it can be shown that the component is post-modification standard, the part is authorized; vice-versa, a pre-modification standard is not approved. This list does not identify all amendment numbers or other similar markings which differentiates the application of lower level SBs. This information is identified if it is available and if it is needed to differentiate between an ETOPS and non-ETOPS configuration. If no note is mentioned and a second level of identifications exists, all parts within the parent numerical value are effected. This list does not track changes to higher assembly part numbers.
i.2
5. Liability Statement:
This list is created by Airbus to provide an aide in controlling ETOPS configurations. It may not be full proof! Prior to adopting this list in an ETOPS operation, each company should verify this information against its customized IPC. Any corrections and/or comments to improve the contents of this list should be provided to Airbus' ETOPS department. 6. Users Guide By Column: 6.1 Column 1 - AI Mod No.: *Component/configuration name: states the name of the component or configuration effected;
name close to or identical to that in the CMP
* mod numbers: modification numbers that are called out in the CMP * CMP Eff: : states which aircraft models have this item in their CMP. Note that this item may not
be in a CMP, but may be basic to the aircraft, by default validating the usage of parts in the approved for ETOPS column.
* or: choice of one of the modifications * and: both modifications must be embodied * ------- AND : the modification(s) above and below dotted lines must be incorporated ------- * ------- OR : the modification(s) above or below dotted lines must be incorporated ------- * ( xxxxx ) : extra information to define scope of modification effectivity * Note - "**The configuration(s) prior to this standard is (are) not flagged ("Not approved for
ETOPS ") in the IPC.**":Signals that an entire configuration and not a component was effected and that once the IPC contains ETOPS notes the modification numbers will not be identified as ETOPS or non-ETOPS.
6.2 Column 2 - AI or vendor SB: * Mod xxxxx: relates to the modification number to the service bulletin number * A330-xx-xxxx: Airbus Service Bulletin number. Same SB number appears in the CMP. * vendor name and SB number: listed when available * or: choice of one of the modifications * and: both modifications must be embodied
i.3
* ------- AND : the modification(s) above and below dotted lines must be incorporated ------- * ------- OR : the modification(s) above or below dotted lines must be incorporated ------- * ( xxxxx ) : extra information to define scope of modification effectivity * (... non-priority, no later than DD MM YY): states that all SBs and or modifications listed above this message
must be incorporated on ETOPS aircraft by the day (DD) month (MM) year (YY) given. Until that time, the aircraft can fly ETOPS without this item being embodied. If more than one note like this appears, all text above the first set of parentheses is concerned and all text after the first set of parentheses and above the second set of parentheses is governed by the note in the second parentheses.
* ------- Superseded by : mods/SBs above the top dotted line are superseded by the ------- mods/SBs below the bottom dotted line 6.3 Column 3 - P/Ns NOT ETOPS Approved: * Lists all part numbers of that referenced component/equipment which are not allowed
to be used on aircraft flying ETOPS. * Pre-mod xxxxx / Pre-SB xx-xxxx: provides a reference to part numbers which were
introduced prior to the ETOPS mod or SB, Mod xxxxx / SB xx-xxxx.
.Part numbers listed directly underneath this heading: The part numbers listed directly
underneath this pre-mod or pre-SB heading are the part numbers which have been invalidated for use on ETOPS aircraft due to the fact that Mod xxxxx becomes the minimum configuration standard.
Caution : Higher assemblies part numbers are not listed. * (mod xxxxx): appears after a part number listed underneath the heading "more advanced
standards" and identifies the modification number which introduces this part. * Equipment / component name: this is the equipment or component which is effected. If
more than one component's name is listed underneath a modification number or SB number, then all components are effected by this mod or SB. If the modification number or SB number is situated underneath the component or equipment name, then the mod or SB only effects this immediate equipment.
i.4
* Phrase "If the a/c in question has This phrase appears when an entire configuration has mod xxxxx, then IPC pages not been changed and there is no individual equipment or reflecting this mod are not component effected. The only identification feature is authorized for use.": the design feature itself which is controlled by a modification
standard. * (after DD MM YY): Signals the date which all of the part numbers (entire column) above this date
are not allowed to be used on ETOPS aircraft. Until that time, these part numbers can be installed on ETOPS aircraft. If more than one note like this appears, all text above the first set of parentheses is concerned and all text after the first set of parentheses and above the second set of parentheses is governed by the note in the second parentheses. If this note does not appear in a column, that means the item is priority for ETOPS and all part numbers in the column cannot be mounted on an aircraft flying an ETOPS route.
* -------: separates equipment or modification part numbers * (VIPC): indicates that this part number is found in the vendor IPC and is not a part sold by
Airbus. The part's family tree may be incomplete due to limited information available. The respective vendor should be contacted in case of questions.
* See (Engine manufacturer's name) IPC: indicates that the referenced engine manufacturer is
responsible for this part and that it is found in its documentation. The part's family tree should be obtained from the engine manufacturer, if not given.
* ------- OR : the part number(s) above the dotted line apply to one configuration and ------- the part number(s) below the dotted line apply to another configuration. The
configuration is mentioned in bold at the top each part number group. 6.4 Column 4 - MINIMUM STANDARD P/N ETOPS APPROVED: * Lists the part number of that referenced component/equipment which is the minimum
standard allowed to be used on aircraft flying ETOPS. More advanced standards and the allowed interchangeability are listed in the IPC.
* Mod xxxxx / SB xx-xxxx: relates to the modification number or to the service bulletin number
which caused the part number to be changed. .Part numbers listed directly underneath this heading: The part number(s) listed directly
underneath this mod number or SB number is (are) the part number(s) introduced by the mentioned change.
Caution, : Higher assembly part numbers are not listed. * more advanced standards: part numbers introduced after the minimum ETOPS standard and
allowed for used on ETOPS aircraft are found in the IPC; hence the note consult the IPC.
i.5
* Phrase "P/Ns shown on IPC pages reflecting mod xxxxx standard": This phrase appears when an entire configuration has been
changed and there is no individual equipment or component effected. The only identification feature is the design feature itself which is controlled by a modification standard.
* Equipment / component name: this is the equipment or component which is effected. If more than
one component's name is listed underneath a modification number or SB number, then all components are effected by this mod or SB. If the modification number or SB number is situated underneath the component or equipment name, then the mod or SB only effects this immediate equipment.
* -------: separates equipment or modification part numbers * (VIPC): indicates that this part number is found in the vendor IPC and is not a part sold by
Airbus. The part's family tree may be incomplete due to limited information available. The respective vendor should be contacted in case of questions.
* See (Engine manufacturer's name) IPC: indicates that the referenced engine manufacturer is responsible for this part and that it is found in its documentation. The part's family tree should be obtained from the engine manufacturer, if not given.
* ------- OR : the part number(s) above the dotted line apply to one configuration and ------- the part number(s) below the dotted line apply to another configuration. The
configuration is mentioned in bold at the top each part number group.
i.6
LIST OF APPROVED ETOPS AIRCRAFT MODELS (EASA)
Series Engine A330 Model
A330-300
GE
A330-301
A330-302
A330-303
PW
A330-321
A330-322
A330-323
RR
A330-341
A330-342
A330-343
A330-200
GE
A330-201
A330-202
A330-203
PW A330-223
RR A330-243
A330-200F PW A330-223F
RR A330-243F
A330 ETOPS PARTS LIST
Ref: AI/EA-O 418/0174/94 Iss 16 Issue date: 17 November 2011 This issue corresponds to LR2/EASA: AMC 20-6/CMP Rev 23
21.1
ATA 21
AI Mod No. AI or Vendor SB P/Ns NOT ETOPS Approved
THALES Standard T2CD8 Mod 55351: A330-22-3072 A330-22-3050 A330-22-3084
_____ OR Standard T2B8 Mod 55352: A330-22-3073 A330-22-3074
OR HONEYWELL Standard TBD* Mod 57545: N/A * FMS Standard not yet available
Pre-mod 55351: N/A
Pre-mod 55352: N/A
Pre-mod 57545: N/A
Mandatory for ETOPS beyond 180 min. Post-Mod 55351: C13039CA01
Post-Mod 55352: C13039BA01 C13039CA01 C13164GA01
Post-Mod 57545: TBD*
* FMS Standard not yet available
A330 ETOPS PARTS LIST
Ref: AI/EA-O 418/0174/94 Iss 16 Issue date: 17 November 2011 This issue corresponds to LR2/EASA: AMC 20-6/CMP Rev 23
23.1
ATA 23
AI Mod No. AI or vendor SB P/Ns NOT ETOPS Approved
MINIMUM STANDARD P/N
ETOPS APPROVED
SATCOM CMP Eff: - CMP Item: 23-1-0000-001 45451 _____ OR
45452 _____ OR 48447
Mod 45451: None
_____ OR Mod 45452: A330-23-3050 _____ OR Mod 48447: A330-23-3099
Mandatory for ETOPS beyond 180 min. P/Ns shown on IPC pages reflecting mod 45451 standard. P/Ns shown on IPC pages reflecting mod 45452 standard. P/Ns shown on IPC pages reflecting mod 48447 standard.
A330 ETOPS PARTS LIST
Ref: AI/EA-O 418/0174/94 Iss 16 Issue date: 17 November 2011 This issue corresponds to LR2/EASA: AMC 20-6/CMP Rev 23
24.1
ATA 24
AI Mod No. AI or vendor SB P/Ns NOT ETOPS Approved
MINIMUM STANDARD P/N
ETOPS APPROVED
Additional Services on CSMG Power CMP Eff: -301,-321,-322, -341,-342 CMP Item: 24-1-0000-001 41462 and 42783 ** The configuration(s) prior to this standard is (are) not flagged ("Not approved for ETOPS") in the IPC.**
Mod 41462: SB A330-24-3018 and Mod 42783: SB A330-24-3004
Configuration pre-mods 41462 and 42783 are prohibited. Use of IPCs not showing this configuration is prohibited.
P/Ns shown on IPC pages reflecting mod 41462 standard. P/Ns shown on IPC pages reflecting mod 42783 standard.
Mod 43285: A330-24-3008/ Sundstrand SB 115EGS01I-24-1
Pre-mod 43285: 755017
Mod 43285: 755017A more advanced stds: Consult IPC
A330 ETOPS PARTS LIST
Ref: AI/EA-O 418/0174/94 Iss 16 Issue date: 17 November 2011 This issue corresponds to LR2/EASA: AMC 20-6/CMP Rev 23
26.1
ATA 26
AI Mod No. AI or vendor SB P/Ns NOT ETOPS Approved
MINIMUM STANDARD P/N
ETOPS APPROVED
155 min Cargo Fire Extinguishing System (Bottles)-Walter Kiddie CMP Eff: -301, -302, -303, -321,-322 -323, -341,-342,-343, -201, -202, -203, -223, -243 BASIC !! Configuration acceptable for ETOPS operations not exceeding 140 min diversion time !!
Mod BASIC: none
Pre-mod BASIC: not applicable
Mod BASIC: Bottle 1: 472931-2 (2140 cu. inch bottle) Bottle 2: 472930-2 (800 cu. inch bottle) 472930-1 (800 cu. inch bottle) (minimum standard P/N for bottle 2, ETOPS approved for diversion time up to 140 mins)
more advanced stds: Consult IPC
260 min Cargo Fire Extinguishing System (Bottles)-Walter Kiddie CMP Eff: -301, -302, -303, -321,-322, -323, -341, -342, -343 -201, -202, -203, -223, -243 -223F, -243F
40314 or 45435 (for A330-200) * Option to 40487* !! Modification mandatory if operating ETOPS up to and beyond 180 min ; Configuration acceptable for ETOPS operations not exceeding 245 min diversion time !!
Mod 40314 or Mod 45435 (for A330-200) none
Pre-mod 40314: Or Pre-mod 45435 (for A330-200): Bottle 1: none Bottle 2 : 472930-2 (800 cu. inch bottle) 472930-1 (800 cu. inch bottle) (NOT ETOPS approved for diversion time > 140 mins)
Mod 40314: or Mod 45435 (for A330-200) Bottle 1: 472931-2 (2140 cu. inch bottle) Bottle 2: 472625-1 (1600 cu. inch bottle) more advanced stds: Consult IPC
A330 ETOPS PARTS LIST
Ref: AI/EA-O 418/0174/94 Iss 16 Issue date: 17 November 2011 This issue corresponds to LR2/EASA: AMC 20-6/CMP Rev 23
26.2
ATA 26
AI Mod No. AI or vendor SB P/Ns NOT ETOPS Approved
Mod 42148: A330-26-3003/ Sextant Avionique SB RAI 2810-26-001
Pre-mod 42148: RAI2810M0202 RAI2810M0101
Mod 42148: RAI2810M0303 more advanced stds: Consult IPC
260 min HTL Fire Extinguishing System (Bottles) CMP Eff: -301, -302, -303, -321,-322, -323, -341,-342, -343, -201, -202, -203,-223,-243, -223F, -243F
40487 (and 45435 for A330-200 only) 200093 (A330-200F only) * Option to 40314* !! Modification mandatory if operating ETOPS up to and beyond 180 min ; Configuration acceptable for ETOPS operations not exceeding 245 min diversion time !!
Mod 40487 (and Mod 45435 for A330-200 only): or Mod 200093 (and Mod 45435 for A330-200F only): none
Pre-mod 40487: (and Pre-mod 45435 for A330-200 only): or Pre-mod 200093: (and Pre-mod 45435 for A330-200F only): none; new standard
Mod 40487 (and Mod 45435 for A330-200 only):
Bottle 1: 34900008-1 (2170 cu. inch bottle)
Bottle 2: 35200003-1 (1600 cu. inch bottle)
more advanced stds: Consult IPC Mod 200093 (and Mod 45435 for A330-200F only):
Bottle 1: 34900008-2 (2170 cu. inch bottle)
Bottle 2: 35200003-2 (1600 cu. inch bottle)
more advanced stds: Consult IPC
A330 ETOPS PARTS LIST
Ref: AI/EA-O 418/0174/94 Iss 16 Issue date: 17 November 2011 This issue corresponds to LR2/EASA: AMC 20-6/CMP Rev 23
27.1
ATA 27
AI Mod No. AI or vendor SB P/Ns NOT ETOPS Approved
Mod 42707: 341400M02 more advanced stds: Consult IPC
FCSC2 (Provide second electrical power supply) CMP Eff: -301,-321,-322, -341,-342 CMP Item: 27-1-0000-002 44047 **The configuration(s) prior to this standard is (are) not flagged ("Not approved for ETOPS") in the IPC.**
Mod 44047: A330-27-3039
If the a/c in question has mod 44047, then IPC pages not reflecting this mod are not authorized for use.
P/Ns shown on IPC pages reflecting mod 44047 standard.
Mod 44441: B492AAM0408 more advanced stds: Consult IPC
A330 ETOPS PARTS LIST
Ref: AI/EA-O 418/0174/94 Iss 16 Issue date: 17 November 2011 This issue corresponds to LR2/EASA: AMC 20-6/CMP Rev 23
28.1
ATA 28
AI Mod No. AI or vendor SB P/Ns NOT ETOPS Approved
MINIMUM STANDARD P/N
ETOPS APPROVED
Fuel Air Separator and Drain Valve CMP Eff: -301,-321,-322, -341,-342 CMP Item: 28-1-0000-001 42890
Mod 42890: A330-28-3014
Drain Valve : Pre-mod 42890: none - new part introduced via mod 42890 Air Separator : Pre-mod 42890: F2827001100600 F2827001100000
Drain Valve : Mod 42890: 4127360 more advanced stds: Consult IPC Air Separator : Mod 42890: F2827001101000 more advanced stds: Consult IPC
Fuel Air Separator Drainage and Access Hatch CMP Eff: -301,-321,-322, -341,-342
CMP Item: 28-1-0000-002 42921 or 43169 **The configuration(s) prior to this standard is (are) not flagged ("Not approved for ETOPS") in the IPC.**
Mod 42921 Or Mod 43169 A330-53-3016
Access Hatch: If the a/c in question has mod 42921 or 43169, then IPC pages not reflecting this mod are not authorized for use.
Access Hatch: P/Ns shown on IPC pages reflecting mod 42921 or 43169 standards.
A330 ETOPS PARTS LIST
Ref: AI/EA-O 418/0174/94 Iss 16 Issue date: 17 November 2011 This issue corresponds to LR2/EASA: AMC 20-6/CMP Rev 23
28.2
ATA 28
AI Mod No. AI or vendor SB P/Ns NOT ETOPS Approved
MINIMUM STANDARD P/N
ETOPS APPROVED
Fuel Tank Transfer Valves Electrical Wiring to CSM/G Power CMP Eff: -301,-321,-322, -341,-342 CMP Item: 28-1-0000-003 42636 **The configuration(s) prior to this standard is (are) not flagged ("Not approved for ETOPS") in the IPC.**
Mod 42636: A330-28-3011
If the a/c in question has mod 42636, then IPC pages not reflecting this mod are not authorized for use.
P/Ns shown on IPC pages reflecting mod 42636 standard.
If the a/c in question has mod 41871, then IPC pages not reflecting this mod are not authorized for use.
P/Ns shown on IPC pages reflecting mod 41871 standard.
Collector Cell Water Scavenge System CMP Eff: -301,-321,-322, -341,-342 CMP Item: 28-1-0000-005 42708 **The configuration(s) prior to this standard is (are) not flagged ("Not approved for ETOPS") in the IPC.**
Mod 42708: A330-28-3009
If the a/c in question has mod 42708, then IPC pages not reflecting this mod are not authorized for use.
P/Ns shown on IPC pages reflecting mod 42708 standard.
Probes: Mod 42242: 120QT: 20130-0218 121QT: 20130-0111 122QT: 20130-0113 123QT: 20130-0112 124QT: 20130-0113 more advanced stds (all probes): Consult IPC
A330 ETOPS PARTS LIST
Ref: AI/EA-O 418/0174/94 Iss 16 Issue date: 17 November 2011 This issue corresponds to LR2/EASA: AMC 20-6/CMP Rev 23
28.4
ATA 28
AI Mod No. AI or vendor SB P/Ns NOT ETOPS Approved
MINIMUM STANDARD P/N
ETOPS APPROVED
Fuel Temperature Sensor and Densitometer Relocation CMP Eff: -301,-321,-322, -341,-342 CMP Item: 28-1-0000-08 42278 and 42787
Mods 42278 and 42787: A330-28-3003
Sensor and Densitometer Relocation: Pre-mod 42278: If the a/c in question has mod 42278, then IPC pages not reflecting this mod are not authorized for use. ------- Harness: Pre-mod 42787: 50150-0506 50150-0406 50150-0306 50150-0206 50150-0106
Sensor and Densitometer Relocation: Mod 42278: P/Ns shown on IPC pages reflecting mod 42278 standard. ------- Harness: Mod 42787: 50150-0606 more advanced stds: Consult IPC
FCMC (Fuel Control and Monitoring Computer) CMP Eff: -301,-321,-322, -341,-342
44575 CMP Item: 28-1-0000-016 (compliance with CMP item 28-1-0000-020 i.e. incorporation of FCMC STD-9) (MOD 47930) supersedes the requirement of CMP item 28-1-0000-016)
Mod 43035 : A330-28-3016 or Mod 43122 : A330-28-3017
Pre-mods 43035 and 43122 : B97H38-602 B97H38-601
Mod 43035 : B97H63-602
Mod 43122 : B97H38-603 more advanced stds : Consult IPC
Fuel System Fault Indication CMP Eff: -301,-321,-322, -341,-342 CMP Item: 28-1-0000-013 43227 ** The configuration(s) prior to this standard is (are) not flagged ("Not Approved for ETOPS") in the IPC**
Mod 43227: A330-33-3005
Pre-mod 43227: If the a/c in question has mod 43227, then IPC pages not reflecting this mod are not authorized for use.
Mod 43227: P/Ns shown on IPC pages reflecting mod 43227 standard more advanced stds: Consult IPC
Mod 47930: B494AAM0614 B494AAM0615 more advanced stds: Consult IPC
A330 ETOPS PARTS LIST
Ref: AI/EA-O 418/0174/94 Iss 16 Issue date: 17 November 2011 This issue corresponds to LR2/EASA: AMC 20-6/CMP Rev 23
28.8
ATA 28
AI Mod No. AI or vendor SB P/Ns NOT ETOPS Approved
MINIMUM STANDARD P/N
ETOPS APPROVED
“Fuel FU/FOB discrepancy” crew alert
CMP Eff : All
CMP Item : 28-1-0000-020 49800 _____ AND
FWC (Flight Warning Computer)
47420
or
49193
(incorporation of FWC std K5 or above supersedes the requirement of CMP item 31-1-0000-001)
_____ AND
FCMC (Fuel Control and Monitoring Computer) Std 14
47930
(incorporation of FCMC std –14 supersedes the requirements of CMP items 28-1-0000-010, 28-1-0000-016 and 28-1-0000-19)
Mod 49800: A330-28-3080 _____ AND
FWC: Mod 47420: A330-31-3042 / Aerospatiale SB LA2E0-31-016 or Mod 49193 _____ AND
FCMC: Mod 47930: A330-28-3067 / SEXTANT SB B494AAM-28-015
Pre-mod 49800: no dedicated P/N information neither for FCMC without FU/FOB discrepancy alert, nor for FCMC P/N with PIN programming for alert de-activation (Mod 49801)
Mod 49800: no dedicated P/N information: FCMC P/N is not changed by PIN programming for activation of FU/FOB discrepancy alert
FWC: Mod 47420: LA2E0060BK50000 more advanced stds: LA2E0060BK60000 LA2E20101K70000 standard K8: P/N’s LA2E20101K800000 & LA2E0060BK800000 further advanced standards: Consult IPC
FCMC: Mod 47930: B494AAM0614 B494AAM0615 more advanced stds: Consult IPC
A330 ETOPS PARTS LIST
Ref: AI/EA-O 418/0174/94 Iss 16 Issue date: 17 November 2011 This issue corresponds to LR2/EASA: AMC 20-6/CMP Rev 23
29.1
ATA 29
AI Mod No. AI or vendor SB P/Ns NOT ETOPS Approved
MINIMUM STANDARD P/N
ETOPS APPROVED
Wire Locked Plugs on Manifolds CMP Eff: -301,-321,-322, -341,-342,-202 CMP Item: 29-1-0000-001 42036 ** The part numbers herewith are not flagged in the IPC due to their use in more than one location on the a/c.**
Mod 42036: A330-29-3003 Note: SB applicable only for A330 MSNs 030 and 037. All other A330's have MSN 42036 as part of their basic delivery configuration.
Ref: AI/EA-O 418/0174/94 Iss 16 Issue date: 17 November 2011 This issue corresponds to LR2/EASA: AMC 20-6/CMP Rev 23
30.1
ATA 30
AI Mod No. AI or vendor SB P/Ns NOT ETOPS Approved
MINIMUM STANDARD P/N
ETOPS APPROVED
Modified Circuitry: Wing Anti-Icing Operation CMP Eff: -301,-321,-322, -341,-342 CMP Item: 30-1-0000-001 42288 **The configuration(s) prior to this standard is (are) not flagged ("Not approved for ETOPS") in the IPC.**
Mod 42288: A330-30-3003
If the a/c in question has mod 42288, then IPC pages not reflecting this mod are not authorized for use.
P/Ns shown on IPC pages reflecting mod 42288 standard.
(compliance with CMP item 28-1-0000-020 i.e. incorporation of FWC std K5 or above (CMP Eff: all) supersedes the requirement of CMP item 31-1-0000-003)
Mod 43578: none
Pre-mod 43578: Not applicable Mod 43578: LA2E00609920000 (see CMP item 28-1-0000-20) more advanced stds: LA2E00609K10000 LA2E006091K0000 LA2E0060AK30000 LA2E0060A3K0000 LA2E0060AK40000 (see CMP item 28-1-0000-20)
std K5 or above LA2E0060BK50000 LA2E0060BK60000 LA2E20101K70000 standard K8: P/N’s LA2E20101K800000 & LA2E0060BK800000 further advanced stds: Consult IPC
Push button (P/B) Dimming Electrical Configuration CMP Eff: -301,-321,-322, -341,-342,-202,-203 CMP Item: 31-1-0000-004 42664 **The configuration(s) prior to this standard is (are) not flagged ("Not approved for ETOPS") in the IPC.**
Mod 42664: none
If the a/c in question has mod 42664, then IPC pages not reflecting this mod are not authorized for use.
P/Ns shown on IPC pages reflecting mod 42664 standard.
A330 ETOPS PARTS LIST
Ref: AI/EA-O 418/0174/94 Iss 16 Issue date: 17 November 2011 This issue corresponds to LR2/EASA: AMC 20-6/CMP Rev 23
34.1
ATA 34
AI Mod No. AI or vendor SB P/Ns NOT ETOPS Approved
Mod 43198: 6763D050000 more advanced stds: Consult IPC
A330 ETOPS PARTS LIST
Ref: AI/EA-O 418/0174/94 Iss 16 Issue date: 17 November 2011 This issue corresponds to LR2/EASA: AMC 20-6/CMP Rev 23
36.2
ATA 36
AI Mod No. AI or vendor SB P/Ns NOT ETOPS Approved
MINIMUM STANDARD P/N
ETOPS APPROVED
Pressure Transducer
CMP Eff : All Applicability: - ETOPS beyond 180 min: to be incorporated no later than 31/12/2013 - ETOPS up to 180 min: recommended CMP Item: 36-1-0000-005
202028
Mod 202028: none
Pre-mod 202028: ZRA380-00 (not approved only for ETOPS beyond 180 min after 31/12/2013)
Mod 202028: ZRA691-00 ZRA380-00 (until 31/12/2013 for ETOPS beyond 180 min only)
more advanced stds: Consult IPC
A330 ETOPS PARTS LIST
Ref: AI/EA-O 418/0174/94 Iss 16 Issue date: 17 November 2011 This issue corresponds to LR2/EASA: AMC 20-6/CMP Rev 23
49.1
ATA 49
AI Mod No. AI or vendor SB P/Ns NOT ETOPS Approved
MINIMUM STANDARD P/N
ETOPS APPROVED
APU GTCP 331-350-C CMP Eff: All CMP item: 49-1-2003-001 Dash 3: 42406 ---- OR ---- Dash 4: 43440
Mod 42406: Allied Signal SBs GTCP 331-49-6842 and 3881000-49-6844 ---- OR ---- Mod 43440: Allied Signal SB GTCP 331-49-7073
Pre-mod 42406: 3800454-2 3800454-1
Pre-mod 43440: 3800454-3
Pre-mod 47312: 3800454-4
Pre-mod 50179: 3800454-5
APU standards: 3800454-4A (see CMP item 49-1-2003-17)
3800454-6 (see CMP item 49-1-2003-17)
Further advanced stds: Consult IPC
ECB Aircraft Wiring, Lightning Protection CMP Eff: All CMP item: 49-1-2003-004 42186 or 42272 **The configuration(s) prior to this standard is (are) not flagged ("Not approved for ETOPS") in the IPC.**
Mod 42186 or Mod 42272: none
If the a/c in question has mod 42186 or 42272, then IPC pages not reflecting this mod are not authorized for use. (Modification in the aircraft type definition.)
P/Ns shown on IPC pages reflecting mod 42186 or 42272 standard.
A330 ETOPS PARTS LIST
Ref: AI/EA-O 418/0174/94 Iss 16 Issue date: 17 November 2011 This issue corresponds to LR2/EASA: AMC 20-6/CMP Rev 23
49.2
ATA 49
AI Mod No. AI or vendor SB P/Ns NOT ETOPS Approved
MINIMUM STANDARD P/N
ETOPS APPROVED
FCU/Lube Pump Assembly CMP Eff: All
CMP item: 49-1-2003-014
43730
or
Wiring Harness (De-Oil Solenoid connector)
None
SB 49-4012 SB 49-3008 ---- OR ---- GTCP 331-49-7094
Mod: none Allied Signal SB 3804007-49-7123 or GTCP 331-49-7127
Mod 46768: Allied Signal
SB GTCP 3804007-49-7429 or Allied Signal SB GTCP 331-49-7430
Pre-SB 49-7123 or 49-7127: 3804007-4 3804007-5 3804007-6 3804007-7 Post-SB 49-7123 or 49-7127: 3804007-8
Pre-mod 46768: 3804007-10 3804007-9 3804007-8
Mod 46768: 3804007-11
more advanced stds: Consult IPC
A330 ETOPS PARTS LIST
Ref: AI/EA-O 418/0174/94 Iss 16 Issue date: 17 November 2011 This issue corresponds to LR2/EASA: AMC 20-6/CMP Rev 23
49.4
ATA 49
AI Mod No. AI or vendor SB P/Ns NOT ETOPS Approved
MINIMUM STANDARD P/N
ETOPS APPROVED
ECB CMP Eff: All Dash-9 or VECB dash –010100 CMP item: 49-1-2003-013
(priority, to be incorporated prior to ETOPS)
43765 or 45332
Dash-10 or VECB dash –210101 CMP item: 49-1-2003-016
46255 or 47454
(Mod 46255 or Mod 47454 supersedes Mod 43765 and Mod 45332)
Dash-11 or VECB dash-210102 CMP item: 49-1-2003-018
50295 or 50245
(Mod 50295 or Mod 50245 supersedes Mod 46255 and Mod 47454)
Mod 43765: GTCP SB 331-49-7087 Rev. 1 or Mod 45332: A330-49-3018/GTCP SB 331-49-7368 Mod 46255: A330-49-3019 / GTCP SB 331-49-7420 or Allied Signal BGT SB 304486-49-7423 or Mod 47454: A330-49-3021 / GTCP SB 331-49-7549 or Allied Signal BGT SB 3888394-49-7548 Mod 50295: A330-49-3023 / Honeywell SB 304486-49-7705 or Honeywell SB GTCP331-49-7706 or Mod 50245: A330-49-3024 / Honeywell SB 304486-49-7701 or Honeywell SB GTCP331-49-7702