-
DATE: 20040930AUTHOR(S):
Company: CIT/MNDName: A. FLUCSAOther:
APPROVAL AUTHORITY(S):Company: CIT/MNDName: A.
FLORUNCUTOther:
OPERATOR(S):Company:Name:
CUSTOMER COMMENTS:
INTERNAL COMMENTS:Proposal 053BKA80FBR150442
The SNMP collector must be enabled to see the MFS in MRTGMFS.New
sections added: Main Page (Section 4.25.1) , MRTG Index Page
(Section 4.25.2) and DetailedStatistics (Section 4.25.3) .
Proposal 043BKA80FBR155339
Update generic customer documentation
installation3BKA32FBR150805
Not possible to log from an User Terminal to the Master.Proposal
033BKA32FBR152883
Update B9 A1353-RA Network Administration Handbook in case the
OMC G2 backup/restoreis done on a set of tapes.
Proposal 023BKA55CBR139123 - Supervision of CPU, memory and
disks of MFS fromOMC-R
Proposal 01Creation from B8 document.
3BKA32CBR145210 - Change the path for the OSM backup/restore
scripts.
-
Alcatel BSS
A1353-RA Network
Administration Handbook
OMC Document
Procedural Handbook
Release B9
3BK 20903 AAAA PCZZA Ed.13
-
Status RELEASED
Short title A1353-RA Network Administration Handbook
All rights reserved. Passing on and copying of this document,
useand communication of its contents not permitted without
writtenauthorization from Alcatel/Evolium.
BLANK PAGE BREAK
2 / 222 3BK 20903 AAAA PCZZA Ed.13
-
Contents
ContentsPreface . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 17
1.1 Before You Start . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 181.1.1 Access Rights . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 181.1.2 Using the OSM . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 18
1.2 Maintaining the System . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 181.2.1 Disk Space . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 181.2.2 System Resources . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 191.2.3 Preventive Maintenance Task Schedule . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191.2.4
HSI Replacement . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2 Backup and Restore of OMC-R . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 232.1 Introduction . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 24
2.1.1 Types of Backup . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 252.1.2 Type and Rotation of Tapes . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
262.1.3 Backup Process . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
27
2.2 Perform a Full or Incremental Backup . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 282.2.1 Perform a Full Backup from OSM . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 292.2.2
Schedule a Full Backup from OSM . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 302.2.3 Perform an
Incremental Backup from OSM . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 302.2.4 Schedule an Incremental Backup from
OSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
312.2.5 Verify the Amount of Data Stored on Tape after an OMC
Backup . . . . . . . . . . . . 31
2.3 Perform a Restore . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 322.3.1 Prerequisites . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 322.3.2 Restore Procedure . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 33
2.4 Prepare SUN StorEdge 3510FC Array . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
363 Access Rights Management . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 39
3.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 403.2 Password Policy . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 40
3.2.1 Default Password Rules . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
403.2.2 Create New Password Policy . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 433.2.3
Modify a Password Policy . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . 443.2.4 Delete
Password Policy . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 453.2.5 List Password
Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . 453.2.6 Display Global
Password Policy . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 45
3.3 User Management . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 463.3.1 Add Users . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 463.3.2 Reset User Passwords . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 483.3.3 Delete Users . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 493.3.4 List Users . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 493.3.5 Display Current Users . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 503.3.6 Display Login Failures . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 503.3.7 Display Last Logins . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 503.3.8 Change Own Password . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 513.3.9 Assign Password Policy . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
513.3.10 Remove Password Policy . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
513.3.11 Unlock axadmin Account - Wrong Password . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 52
3.4 OMC-R Application Functions . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 533.4.1 BSSUSM Functions . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 533.4.2 MFSUSM Functions . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
553.4.3 RNUSM Functions . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
573.4.4 OAM Functions . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
583.4.5 AS CurrentUSM Functions . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 603.4.6 AS
HistoricalUSM Functions . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 61
3BK 20903 AAAA PCZZA Ed.13 3 / 222
-
Contents
3.4.7 IMT Functions . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 623.4.8 SEC Functions . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 633.4.9 Other Functions . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 63
3.5 OMC-R FADs . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 663.5.1 SYSTEM_ADMINISTRATION_FAD . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
663.5.2 DOC_FAD . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 663.5.3 OWN_MRT_FAD . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
663.5.4 DSMUSM_FAD . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
663.5.5 OSM_FAD . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 663.5.6 TELECOM_ADMINISTRATION_FAD . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . 663.5.7
OAM_ADMINISTRATION_FAD . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . 673.5.8
ASCURUSM_ADMINISTRATION_FAD . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 673.5.9 PERF_ADMINISTRATION_FAD . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 673.5.10 ASHISUSM_ADMINISTRATION_FAD . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 683.5.11
OSM_USER_FAD . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . 683.5.12
SUPERVISION_FAD . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 683.5.13
ASHISUSM_SUPERVISION_FAD . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 693.5.14 RNUSM_SUPERVISION_FAD
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 693.5.15 BSSUSM_SUPERVISION_FAD . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
703.5.16 MFSUSM_SUPERVISION_FAD . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 703.5.17
TRACE_VIEWER_FAD . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . 713.5.18
OAM_SUPERVISION_FAD . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . 713.5.19
RESTRICTED_SUPERVISION_FAD . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 713.5.20
MFSUSM_RESTRICTED_SUPERVISION_FAD . . . . . . . . . . . . . . . . .
. . . . . . . . . . 723.5.21 BSSUSM_RESTRICTED_SUPERVISION_FAD . .
. . . . . . . . . . . . . . . . . . . . . . . . . 723.5.22
CONFIGURATION_FAD . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 733.5.23
ASHISUSM_CONFIGURATION_FAD . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 733.5.24 RNUSM_CONFIGURATION_FAD .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 743.5.25 BSSUSM_CONFIGURATION_FAD . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . 743.5.26
MFSUSM_CONFIGURATION_FAD . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 753.5.27
ASCURUSM_CONFIGURATION_FAD . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 763.5.28 ASCURUSM_READ_ONLY_FAD . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 763.5.29 ASCURUSM_SUPERVISION_FAD . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . 773.5.30
HW_EXT_RED_FAD . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 773.5.31
RNUSM_HW_EXT_RED_FAD . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . 773.5.32
BSSUSM_HW_EXT_RED_FAD . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 783.5.33
SOFTWARE_MANAGEMENT_FAD . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 783.5.34
BSSUSM_SOFTWARE_MANAGEMENT_FAD . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 783.5.35 MFS_BACKUP_FAD . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 783.5.36 PRC_FAD . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 793.5.37 RNUSM_PRC_FAD . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 793.5.38 PRC_RESTRICTED_ACCESS_FAD . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 793.5.39
RNUSM_PRC_RESTRICTED_FAD . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 793.5.40 MLU_FAD . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 803.5.41 RNUSM_MLU_FAD . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 803.5.42 ACCESS_TO_UNIX_FAD . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 803.5.43 XTERM_FAD . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 803.5.44 PERFORMANCE_FAD . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 813.5.45 PERF_VIEWER_FAD . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
813.5.46 RNUSM_PERFORMANCE_FAD . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 813.5.47
MFSUSM_PERFORMANCE_FAD . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 813.5.48 BSSUSM_PERFORMANCE_FAD .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 823.5.49 RESTRICTED_PERFORMANCE_FAD . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 823.5.50
BSSUSM_RESTRICTED_PERFORMANCE_FAD . . . . . . . . . . . . . . . . .
. . . . . . . . 833.5.51 COMMAND_MODE_FAD . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
833.5.52 COMMAND_MODE_FAD_A . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 833.5.53
INHIBIT_OAD_CONTROL_FAD . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 84
4 / 222 3BK 20903 AAAA PCZZA Ed.13
-
Contents
3.5.54 INHIBIT_FAD_CONTROL FAD . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 843.5.55
RNUSM_INHIBIT_FAD_CONTROL_FAD . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 863.5.56 UFM_FAD . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 863.5.57 RNO_TB_FAD . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 863.5.58 OAM_INHIBIT_FAD_CONTROL_FAD
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 873.5.59 ASHISUSM_INHIBIT_FAD_CONTROL_FAD . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 883.5.60
MFSUSM_INHIBIT_FAD_CONTROL_FAD . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 893.5.61 BSSUSM_RI_FAD . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 903.5.62 BSSUSM_INHIBIT_FAD_CONTROL_FAD . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 913.5.63
ASCURUSM_INHIBIT_FAD_CONTROL_FAD . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 923.5.64 MULTI_OMC3_FAD . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 933.5.65 UFM_ADMINISTRATION_FAD . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
933.5.66 NPA_ADMINISTRATION_FAD . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 933.5.67
DCN_ADMINISTRATION_FAD . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . 943.5.68
AS_ADMINISTRATION_FAD . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 943.5.69
PROCESS_MANAGEMENT_FAD . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 943.5.70
USER_AND_PLATFORM_MANAGEMENT_FAD . . . . . . . . . . . . . . . . .
. . . . . . . . . 943.5.71 READ_ONLY_FAD . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 953.5.72 RNUSM_READ_ONLY_FAD . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
953.5.73 BSSUSM_READ_ONLY_FAD . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . 953.5.74
MFSUSM_READ_ONLY_FAD . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . 963.5.75
REMOTE_INVENTORY_FAD . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 963.5.76 ENSUSM_RI_FAD .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 963.5.77 FULL_MRT_FAD . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 963.5.78 Global_Log_Viewer . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 973.5.79 MFSSNMP_SUPERVISION_FAD . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 973.5.80 OAM_MRTG_FAD . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 973.5.81 MFSUSM_NAVIGATE_MRTG_FAD . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . 973.5.82
IMT_CONF_GPU_FAD . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . 973.5.83
IMT_CONF_MFS_FAD . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . 983.5.84
IMT_ADMIN_FAD . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . 983.5.85
IMT_PLATFORM_FAD . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 983.5.86
IMT_GPU_CONF_FAD . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . 983.5.87
IMT_MFS_CONF_FAD . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . 983.5.88
IMT_MFS_ADMIN_FAD . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . 993.5.89
IMT_CONF_READ_FAD . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 993.5.90
IMT_READ_CONF_FAD . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 993.5.91
IMT_MFS_PLATFORM_FAD . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 993.5.92 ACO_MNG_FAD . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 993.5.93 ACO_NTC_FAD . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 100
3.6 Operator Management . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 1013.6.1 Operators window . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 1013.6.2 Edit window . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 101
3.7 Terminal Management . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 1023.7.1 Create Terminal window . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 1023.7.2 Profiles window . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 102
3.8 Operator Profile Management . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 1033.8.1 Display All Available Operator Profiles . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1043.8.2 Create Operator Profiles . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1043.8.3 Delete Operator Profiles . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1053.8.4 Display Operator Profiles . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1053.8.5 Modify an Operator Profiles . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1063.8.6
Assign Operator Profiles . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . 1073.8.7
Unassign Operator Profiles . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 107
3.9 Terminal Profile Management . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 1083.9.1 Display All Available Terminal Profiles . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1083.9.2 Create Terminal Profiles . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
108
3BK 20903 AAAA PCZZA Ed.13 5 / 222
-
Contents
3.9.3 Delete Terminal Profiles . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1093.9.4 Display Terminal Profiles . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1093.9.5 Modify a Terminal Profile . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1093.9.6 Attach/Detach Terminal Profiles . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
3.10 OAD Management . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 1113.10.1 Create OADs . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 1113.10.2 Delete OADs . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 1123.10.3 Display OADs . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 1123.10.4 Modify Access Rights to OADs . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 112
3.11 FAD Management . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 1133.11.1 Create FAD . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 1133.11.2 Delete FAD . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 1133.11.3 Display FAD . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 1133.11.4 Modify FAD . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 114
3.12 Restore Default FADs and Profiles . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 1143.13 FTP Users . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 1153.14 Change FTP User Password . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 1173.15 Non-OMC-R Users
Customization . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 1173.16 Activate MPM
on OMC-R . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
4 Day-To-Day Administration Tasks . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 1194.1 Hardware Inventory . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 120
4.1.1 Display Workstations . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1204.1.2 From the Hardware Inventory Option . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . 1204.1.3 From the
Workstation Management Option . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 120
4.2 Software Inventory . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 1214.2.1 Display Software Applications . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 1214.2.2 Display Third Party Information . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1224.2.3 Display Patches . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1224.2.4 Display Changed Files . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1234.2.5 Display Binary Signatures . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
4.3 Failure Management . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 1244.3.1 Capture Failure Data . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 1244.3.2 Display Failure Data . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 1244.3.3 Capture Failure Data . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 1254.3.4 Display Failure Data . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1254.3.5 Lock/Unlock Failure Data Files . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1264.3.6
Delete Failure Data Files . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . 1264.3.7
Archive Failure Data . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1274.3.8
Display Archived Failure Data . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . 1274.3.9 Delete
Archived Failure Data . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . 127
4.4 Monitor System . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 1284.4.1 Disk Usage . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 1284.4.2 Internet Protocol Monitoring . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 129
4.5 Start the System . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 1304.6 Start OMC-R Application . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 130
4.6.1 From a UNIX Terminal . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1304.6.2 From OSM . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 130
4.7 Stop OMC-R Application . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 1314.7.1 Whole OMC-R . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 1314.7.2 Shutdown USMs . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 131
4.8 Stop the System . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 1324.9 Start Application Process from DSM . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 1324.10 Stop Application Process from DSM . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 1324.11 Process and Platform Monitoring . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 1334.12 Device Management . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . 134
4.12.1 Add Workstations . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1344.12.2 Remove Workstations . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
135
6 / 222 3BK 20903 AAAA PCZZA Ed.13
-
Contents
4.12.3 Add X Stations . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 1364.12.4 Remove X Stations . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1384.12.5 Add Printers . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 1394.12.6 Remove Printers . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 1394.12.7 Define Station Default Printer . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1404.12.8 Define User Default Printer . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1404.12.9 Documentation Server Management . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 1414.12.10 LDAP Hosts
Cleanup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . 141
4.13 Configuration Parameter Inventory . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 1424.14 Scheduling . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 1434.15 Clean Up . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1444.16
Broadcast Messages . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 1464.17 Set Date and Time . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 1464.18 Run Multiple OMC-Rs from One HMI
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 147
4.18.1 Prerequisites . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 1474.18.2 Set UNIX Parameters on One OMC-R . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 1474.18.3
Connection Procedure . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . 1484.18.4
Creating a Shortcut . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
4.19 Logs Management . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 1504.19.1 View Logs . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 1504.19.2 Logs Merge on Demand . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 152
4.20 Change NMC . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 1534.20.1 Find NMC Parameters . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 1534.20.2 Stop q3im Applications . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 1534.20.3 Undeclare Current NMC . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1544.20.4 Declare New NMC . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
155
4.21 List NMC and OMC Network Id . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 1554.22 Alarm Sublist and Filter Management . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 156
4.22.1 Alarm Sublists . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 1564.22.2 Alarm Sublist Filters . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1574.22.3 Pre-Defined Aging Schemes . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . 1604.22.4
Change Default Alarm Sublist . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 1614.22.5 Retrieve
Original Default Alarm Sublist . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 1614.22.6 Change Default for
Existing Users . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 1624.22.7 Retrieve Original Default for
Existing Users . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 1624.22.8 Add Alarm Sublist Filters . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
163
4.23 Navigate in a New Mozilla Window . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 1634.24 Secure External Workstation and User . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 164
4.24.1 Add Secure External Workstation . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . 1644.24.2
Secure External Workstation Inventory . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 1644.24.3 Delete Secure
External Workstation . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 165
4.25 A1353-RA MRTG View . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 1664.25.1 Main Page . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 1664.25.2 MRTG Index Page . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 1684.25.3 Detailed Statistics . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 173
4.26 Increase the Trace Level . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 1754.27 Hardware Inventory . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 1764.28 Security Impact on the
A1353-RA Remote Installation . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 176
4.28.1 AUTOMOUNT Service . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1774.28.2
BOOTPARAMD Service . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . 178
4.29 Network Information Summary . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 1785 Modify IP Addresses . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 181
5.1 Impact and Duration . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 1825.1.1 Impact on Service . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 1825.1.2 Duration of IP Address Modification . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
182
5.2 Modify the IP Address for the Entire Network . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1835.2.1 Global Procedure . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
183
3BK 20903 AAAA PCZZA Ed.13 7 / 222
-
Contents
5.2.2 Modify the IP Address of the HMI . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . 1835.2.3 Modify
the IP Address of an X Station . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 1835.2.4 Modify the IP Address of
the Master and Agent . . . . . . . . . . . . . . . . . . . . . . .
. . . 1845.2.5 Modify the IP Address of the BSC Evolution . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 1895.2.6 Modify
the IP Address of the MFS Stations . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 1905.2.7 Modify the IP Address of the
Cisco Router . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 1935.2.8 Modify the IP Address of the NPA Server . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . 1935.2.9
Modify the IP Address of the NPA Client . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 193
5.3 Modify the IP Address for One Machine . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1955.3.1 Modify the IP Address of an X Station . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 1955.3.2 Modify
the IP Address of the HMI . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 1965.3.3 Modify the IP Address
of a Network Printer . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 1965.3.4 Modify the IP Address of the Master . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1975.3.5 Modify the IP Address of the Agent . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . 2005.3.6 Modify
the IP Address of the BSC Evolution . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 2015.3.7 Modify the IP Address of the
MFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 2025.3.8 Modify the IP Address of the Cisco Router .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2025.3.9 Modify the IP Address of the NPA Server . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 2035.3.10 Modify the
IP Address of the NPA Client . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 203
6 Administrative Tasks for MPM . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 2056.1 Configure Printer . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 2066.2 Display Visu-log . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2076.3
Manage ASCII (OBSYNT) Output . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2076.4 Start/Stop MPM . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 208
6.4.1 Starting MPM . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2086.4.2 Stopping MPM . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
208
7 Backup/Restore MFS Configuration Data . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 2097.1 Introduction . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 2107.2 Backup MFS Data . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . 211
7.2.1 Who Can Perform a Backup . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . 2117.2.2
O&M and Telecom Impact . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . 2117.2.3 Size
of Backup Files . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 2117.2.4 Duration
of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 211
7.3 Backup Procedure . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 2117.3.1 Backup to Local Disk on MFS Control
Station . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2117.3.2 Upload to OMC-R . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
212
7.4 Restore MFS Data . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 2137.4.1 Who Can Perform a Restore of the
Configuration Files . . . . . . . . . . . . . . . . . . . .
2137.4.2 O&M Impact . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 2137.4.3 Telecom Impact . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 2137.4.4 Duration of Operation . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
213
7.5 Restore Procedure . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 2147.5.1 Download from OMC-R . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 2147.5.2 Restore MFS Data . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 215
8 Upgrade Documentation . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 2178.1 Introduction . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . 2188.2 Upgrade of
Customer Documentation CD-ROM . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 218
8.2.1 Prerequisites . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 2188.2.2 Different Cases . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 218
8.3 Launch Documentation Tool . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 2208.4 Troubleshooting . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 220
8.4.1 No Error Message . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2208.4.2 Correcting Monitor Color Problems . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . 221
8 / 222 3BK 20903 AAAA PCZZA Ed.13
-
Figures
FiguresFigure 1: Installation, Backup and Restore Process . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 24Figure 2: Type and Rotation of Tapes . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . 26Figure 3:
Backup of Modified Files . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 27Figure 4: Application Manager Icon . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . 148Figure 5: Example
Create Action Window . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
149Figure 6: A1353-RA MRTG Main View . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 166Figure 7: A1353-RA MRTG MFS View . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 167Figure 8: Detailed
Statistics MFS View . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 173Figure 9: Detailed Statistics A9130 BSC Evolution View . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 174
3BK 20903 AAAA PCZZA Ed.13 9 / 222
-
Tables
TablesTable 1: Preventive Maintenance Task Schedule . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 20Table 2: Types of Backup . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
25Table 3: Password Composition Rules Description . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 41Table 4: FTP server directory organization for
omc3ftp , rno , pmuser and laser . . . . . . . . . . . . . . . . .
. . . 116Table 5: FTP server directory organization for metrica . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 116Table 6: Default account settings for non-OMC-R
users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 117Table 7: Password policy for non-OMC-R
users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 117Table 8: DSMUSM
Features Description . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 133
10 / 222 3BK 20903 AAAA PCZZA Ed.13
-
Preface
PrefacePurpose The Administration Guide describes how to perform
day-to-day administration
of the A1353-RA including:
Backup/restore
Access rights
Miscellaneous administration tasks
MPM administration.
Whats New In Edition 13Modification done in Network Information
Summary (Section 4.29) section toverify the presence of MFS
Evolution RI files.Modification done in Perform Restore (Section
2.3.2.1) section to verify thelogical drive status for SE 3510.
In Edition 12Creation of section HSI Replacement (Section
1.2.4).Modification done in A9130 MFS Evolution (Section 5.2.6.2)
and Modify the IPAddress of the MFS (Section 5.3.7) for the double
switchover of the stations.Modification done in Modify the IP
Address of the BSC Evolution (Section 5.2.5),Update Master IP
Address in the BSC Evolution (Section 5.2.4.1) and Modifythe IP
Address of the BSC Evolution (Section 5.3.6) by explain better the
tasks.A new section was added, Activate MPM on OMC-R (Section 3.16)
.Modification done in Perform a Full Backup from OSM (Section
2.2.1) , bycorrecting the path for backup log.
Modification done in Default Password Rules (Section 3.2.1) and
Reset UserPasswords (Section 3.3.2) for Password policy
section.Modification done in Modify the IP Address of the Master
and Agent (Section5.2.4) , Modify the IP Address of the HMI
(Section 5.2.2) , Modify the IPAddress of the NPA Server (Section
5.2.8) , Modify the IP Address ofthe Master (Section 5.3.4) ,
Modify the IP Address of the Agent (Section
3BK 20903 AAAA PCZZA Ed.13 11 / 222
-
Preface
5.3.5) , Modify the IP Address of the HMI (Section 5.3.2.2) ,
Modify the IPAddress of the NPA Server (Section 5.3.9) section by
adding informationregarding the netmask and defaultrouter.
Modification done in Modify the IP Address of the Master and
Agent(Section 5.2.4) and Modify the IP Address of the Master
(Section 5.3.4)for formattedHtml file update, NSAP configuration
and SEC online helpregarding the change of ip address of the
Master.
Adding in Backup/Restore section Introduction (Section 2.1) the
LEGATOdocument .
Modification done in Manage ASCII (OBSYNT) Output (Section 6.3)
sectionby adding the MFS directory.
A new section was added, Activate MPM on OMC-R (Section 3.16)
.Modification done in Perform Restore (Section 2.3.2.1) section to
verify thelogical drive status for SE 3510.Modification done in
Prepare SUN StorEdge 3510FC Array (Section 2.4)section. Detailing
the procedure.
In Edition 11Network info summary easily available at OMC-R. New
chapter introducedNetwork Information Summary (Section 4.29) .Add
the Introduction (Section 2.1) .Introduction of the Create Terminal
window (Section 3.7.1) .Arrange in right order the subchapters from
Modify the IP Address of the MFSStations (Section 5.2.6) .The
documentation upgrade from old without Verity to new with Verity
can bedone without to save the license before. Improvement done in
Upgrade ofCustomer Documentation CD-ROM (Section 8.2) .The IDs of
sections Create FAD (Section 3.11.1) and Modify FAD (Section3.11.4)
are modified to correspond to the OMCGseccf package of
theSEC-Help.The password length was increased. Modification done in
Default PasswordRules (Section 3.2.1) .After an MFS IP address
modification, a system backup must be performed.Modification done
in A9130 MFS Evolution (Section 5.2.6.2) .
12 / 222 3BK 20903 AAAA PCZZA Ed.13
-
Preface
In Edition 10The section "Verify the amount of data stored on
tape after an OMC backup"was removed from the document.Restriction
3BKA20FBR159175 removed from Perform a Restore (Section 2.3)To
reduce the restore time, wait only for the root and usr
mirrorsresynchronization. Updates in step (8) and step (12) in (in
section 2.3.2.1)Update Display Changed Files (Section 4.2.4) .
In Edition 09Documentation installation script improvements.
Verity search engine isoptional. Updates in Upgrade Documentation
(Section 8) .Editorial improvements of Display Software
Applications (Section 4.2.1) andDisplay Third Party Information
(Section 4.2.2) sections.New chapter about the amount of data on a
tape, section 2.2.5 Verify theamount of data stored on tape after
an OMC backup:It is strongly recommended to preserve existing
Alcatel FADs. Updates inCreate FAD (Section 3.11.1) step (3) and
Modify FAD (Section 3.11.4) .Update MRTG Index Page (Section
4.25.2) .The following new sections are added:
Operator Management (Section 3.6)Terminal Management (Section
3.7) .
In Edition 08For SUN StorEdge 3510FC Array preparing phase, only
the serial connectionmust be used. Updates in Prepare SUN StorEdge
3510FC Array (Section 2.4)MX-MFS introduction. Impacts in A9135 MFS
(Section 5.2.6.1) , A9130 MFSEvolution (Section 5.2.6.2) , Update
Master/Agent IP Address in the MFS(Section 5.2.4.2) , Modify MFS IP
Address in OMC-R (Section 5.2.6.3) andStart MFS Supervision
(Section 5.2.6.4)A9130 BSC Evolution was added in MRTG. The
following sections wereupdated
A1353-RA MRTG View (Section 4.25)MFS MRTG Index Page (Section
4.25.2.1)A9130 BSC Evolution MRTG Index Page (Section
4.25.2.2)Detailed Statistics (Section 4.25.3)
The following new sections are added:
Operator Management (Section 3.6)Terminal Management (Section
3.7) .
3BK 20903 AAAA PCZZA Ed.13 13 / 222
-
Preface
In Edition 07MF-improved_restore_OMC.sh.V490
andMF-improved_restore_OMC.sh.E4500 are now integrated in
scriptMF-improved_restore_OMC.sh , so they were removed from (in
section2.3.2.1) .AUTOMOUNT and BOOTPARAMD services impact on remote
A1353-RAinstallation is described in Security Impact on the
A1353-RA RemoteInstallation (Section 4.28)Only one LUN on all
channels must be used. Updates in Prepare SUNStorEdge 3510FC Array
(Section 2.4) , step (5)Update Restore MFS Data (Section 7.5.2)
with a re-synchronisation of the MFS.
In Edition 06Synchronization check introduced in step (12) in
(in section 2.3.2.1) .Array to host connection mode must be set on
"Loop only". Updates in PrepareSUN StorEdge 3510FC Array (Section
2.4) paragraph.Sun Fire V490 station introduction:
A new section was added: Prepare SUN StorEdge 3510FC Array
(Section2.4)(in section 2.3.2.1) was updated.
Modification of the "Evolium" word in GSM documentation.
In Edition 05Names of the traces are changed in Increase the
Trace Level (Section 4.26)
In Edition 04(in section 2.3.2.1) was improved by:
copying MF-improved_restore_OMC.sh.V490 script for the
restoreoperation
copying extra files in case of StorEdge Array 3510 attached to
the machine.
In Edition 03Restriction introduction in Perform a Restore
(Section 2.3)xhost + command is modified for security reasons,
in:
Run Multiple OMC-Rs from One HMI (Section 4.18)Connection
Procedure (Section 4.18.3)Creating a Shortcut (Section 4.18.4)
.
14 / 222 3BK 20903 AAAA PCZZA Ed.13
-
Preface
In Edition 02Command that verifies the state of the tapes is
inserted in Perform a Full orIncremental Backup (Section
2.2)Security improvement:
rlogin command must be replaced with the ssh command. Updates
inRemove X Stations (Section 4.12.4)New section for non-OMC users
(Non-OMC-R Users Customization(Section 3.15) )
Updates regarding the unlock of users account (Reset User
Passwords(Section 3.3.2) )Cosmetic updates in FTP Users (Section
3.13) .LDAP server is case insensitive. Updates in Add Users
(Section 3.3.1) .In the Add Workstations (Section 4.12.1) section,
add a note regarding acheck of /etc/hosts .Recommendation regarding
Operator Profile added in Operator ProfileManagement (Section 3.8)
.metrica FTP user introduction in FTP Users (Section 3.13)When
setting the color depth, the resolution is given: Correcting
Monitor ColorProblems (Section 8.4.2) .Update Modify the IP Address
of the Master and Agent (Section 5.2.4) .Introduction of new OMC-R
Application Functions (Section 3.4) and OMC-RFADs (Section 3.5) and
Terminal Profile Management (Section 3.9) .Remove Basic and QOS
Alerters from Administrative Tasks for MPM (Section6) .It is
possible to Restore Default FADs and Profiles (Section 3.12)
.Update paragraph Upgrade Documentation (Section 8) .New paragraph:
Hardware Inventory (Section 4.27) .In troduction of SEC7 and FAD
editor in Access Rights Management (Section3) .Introduction of LDAP
in Modify IP Addresses (Section 5) .
In Edition 01Creation of the document from B8 release.Creation
of:
Main Page (Section 4.25.1)MRTG Index Page (Section
4.25.2)Detailed Statistics (Section 4.25.3)A1353-RA MRTG View
(Section 4.25) .
Improvement of Backup and Restore of OMC-R (Section 2) to use a
set oftapes for full backup/restore.Update with the right path for
OSM improved restore script in Perform aRestore (Section 2.3) .
Audience The handbook is intended for Network
administrators.
3BK 20903 AAAA PCZZA Ed.13 15 / 222
-
Preface
Assumed Knowledge You must have a basic understanding of the
following:
Alcatel operations and maintenance concepts
Telecommunications engineering
UNIX concepts.
16 / 222 3BK 20903 AAAA PCZZA Ed.13
-
1 Introduction
1 Introduction
Read this section before you start the procedures.
3BK 20903 AAAA PCZZA Ed.13 17 / 222
-
1 Introduction
1.1 Before You Start
1.1.1 Access RightsYou must have the administrator profile named
axadmin_special_profileassigned to you for access to the OMC-R.
1.1.2 Using the OSMOn the OSM, a number of options are
available.These are represented by a click button and the option
name.
If the click button is orange and its associated feature name is
underlinedyou can click on either the button or the name. If you
click on the button, youare offered more choices than if you click
on the name (for example, you areasked to decide which workstation
you want information for).If the button is gray, the name is
underlined and you must click on thename to proceed.
If the name is not underlined, the button is orange and you must
clickon the button to proceed.
You can click on [ Back ] , [ Forward ] or [ Exit ] at the top
of each screen.Click on [ Back ] to go to whichever screen you were
looking at last.Click on [ Forward ] after you have used the [Back]
button. It takes you towhere you started from, moving forward a
screen at a time.
Click on [ Exit ] to close the OSM.
Note: For a distributed A1353-RA system (that is, where more
than one workstationcan be used as the main workstation), any
change to the system made by anAdministrator applies to all
stations.
1.2 Maintaining the SystemRoutine maintenance helps prevent or
reduce the number of system failures.During normal operation
sufficient resources are available to the OMC-R,particularly those
of:
Disk space
System resources.
1.2.1 Disk SpaceAlthough sufficient resources are available when
the application is initiallystarted, normal operation of the OMC-R
gradually uses up the available diskspace. It is therefore
necessary to perform some system maintenance regularlyto preserve
sufficient disk space for correct operation (see Table 1 ).
18 / 222 3BK 20903 AAAA PCZZA Ed.13
-
1 Introduction
1.2.2 System ResourcesEach action requested by an operator
results in the dynamic creation of a UNIXprocess. The process is
automatically killed when the action ends. However, ifthe action
cannot be executed or ends abnormally, the processes are not
killed.In this case the system resources used by those processes
are not release.The decrease in available resources reduces the
processing capacity of theOMC-R. This can cause other problems
which in crease the number ofunrealized processes, and so on.
System can hang, crash or be slow to respond. If system
resources are notreleased or a process continues to grow, then
eventually all system resourcesare used up. Perform the preventive
maintenance tasks listed in Table 1 atthe appropriate time.
1.2.3 Preventive Maintenance Task ScheduleThe following table
lists the preventive maintenance tasks and the scheduledtime
periods.
How Often Routine Task Where If there is a problem
Weekly Shutdown USM sectionof Stop OMC-RApplication
(Section4.7)
In UNIX, MasterIf OSM, any machine
-
Every three months Stop the System (Section4.8) and then Start
theSystem (Section 4.5)
In UNIX, MasterIf OSM, any machine
-
After installation,upgrade, massivenetwork change, or
whenIncremental Backup uptakes just as long as aFull Backup
Full Backup, see Performa Full or IncrementalBackup (Section
2.2)
If UNIX, MasterIf OSM, any machine
System will attemptto resynch disks andreturn to stable
state.Analyze log file andsolve problem.
Depends on systemactivity. Daily if lots ofnetwork change.
Weeklyor monthly if little or nonetwork change.
Incremental Backup,see Perform a Full orIncremental
Backup(Section 2.2)
If UNIX, on MasterIf OSM, any machine
Analyze log file and solveproblem.
In case of system fault Failure Management,see Failure
Management(Section 4.3)
OSM Warning! These files cantake up to 500 Mbytes ofdisk
space.
Daily Monitor the System DiskUsage, see MonitorSystem (Section
4.4)
OSM -
3BK 20903 AAAA PCZZA Ed.13 19 / 222
-
1 Introduction
How Often Routine Task Where If there is a problem
Daily Process and PlatformMonitoring, see Processand Platform
Monitoring(Section 4.11)
OSM -
After installation andwhen change scheduling
Scheduling, seeScheduling (Section4.14)
OSM Check crontab.
Daily (automatic usingcrontab) and manual iffile system is full
or filesare no longer needed.
Automatic or manualClean-up of files, seeClean Up (Section
4.15)
OSM Check crontab to see ifscheduled.
Before performingbackup or systemshutdown
Broadcast Messages,see BroadcastMessages (Section4.16)
OSM Check who is logged onand try to contact them(e.g. by phone,
e-mail,etc.).
In case of problem. View User Logs, seeView Logs
(Section4.19.1)
OSM -
After every Software orHardware modification
Backup MFS, seeBackup MFS Data(Section 7.2)
OMC-R using remoteTerminal
Check IP connection andthat MFS is running.
When power on ofmachines and startingOMC-R application
fromUNIX.
Start the System,see Start the System(Section 4.5)
Master Host, all othermachines.
-
When starting orre-starting OMC-Rapplication using DSM
Start OMC-RApplication, see StartOMC-R Application(Section
4.6)
DSM -
When only stopping theOMC-R application orUSMs
Stop OMC-R Application,see Stop OMC-RApplication
(Section4.7)
OSM -
When stopping OMC-Rapplication and power offof machines
Stop the System, seeStop the System (Section4.8)
OSM and each machine -
Table 1: Preventive Maintenance Task Schedule
1.2.4 HSI Replacement1. In case of HSI network board failure, if
the old board is X1155A AND there is
not a similar one available, the new generic board X1355A must
be used.
20 / 222 3BK 20903 AAAA PCZZA Ed.13
-
1 Introduction
2. In this case call Alcatel support, because the new drivers
are installedusing the "A1353-RA Software Replacement with Hardware
Change,Same Number of Agents" procedure.
3BK 20903 AAAA PCZZA Ed.13 21 / 222
-
1 Introduction
22 / 222 3BK 20903 AAAA PCZZA Ed.13
-
2 Backup and Restore of OMC-R
2 Backup and Restore of OMC-R
This section describes how to perform full and incremental
backups, as wellas a system restore.
3BK 20903 AAAA PCZZA Ed.13 23 / 222
-
2 Backup and Restore of OMC-R
2.1 IntroductionRegular backups ensure that data loss is
minimized in the case of hardware orsoftware failure such as a disk
crash. Backing up allows a restore of the OMC-R.When an OMC-R is
installed, a timestamp is made. Full backups back up allthe files
more recent than this timestamp. Incremental Backups back up all
thefiles more recent than the full backup, see the following
figure.
CD 1
CD 2 T1 /etc/TIMESTAMP_INSTALL
CD 3
OptionalSoftware
CD DOC
Full T2 Relevant files younger than T1Backup
Incremental T3 Relevant files younger than T2Backup 1.1
Incremental T4 Relevant files younger than T2Backup 1.2
System Restore
Full T6 All restored files get the actual date/time.Restore 1.0
This allows Backup 2.0 to know to back them up.
Incremental T7 All restored files get the actual
date/timeRestore 1.2 This allows Backup 2.0 to know to back them
up.
Full T8 Relevant files younger than T5 are backed upBackup
2.0
Incremental T9 Relevant files younger than T8 are backed
upBackup 2.1
System Installation
Time
Time
System Failure,go to System Restore
Figure 1: Installation, Backup and Restore Process
The Backup/Restore procedure can also be performed by LEGATO
software,refer to document LEGATO User Guide .
24 / 222 3BK 20903 AAAA PCZZA Ed.13
-
2 Backup and Restore of OMC-R
2.1.1 Types of BackupThe following table describes the types of
backups and the frequency in whichthey must be performed.
Type Description Recommended Frequency
Full Backup Saves all files. After installation, upgrade,
massivenetwork change, or when Incrementalbackup takes just as long
as a Fullbackup.
Incremental Backup Saves files that have been modified sincethe
last full backup.
Depends on system activity. Dailyif there are many network
changes.Weekly or monthly if little or nonetwork change.
Table 2: Types of Backup
2.1.1.1 In Case of FailureIf the backup fails to complete, the
script returns the disks and system to aconsistent state. Check for
error messages. Solve the problem and retrythe backup.
2.1.1.2 What is Backed Up/Restored ?Only the Master and Agent
hosts are backed up and restored.
2.1.1.3 OSMBackups are performed in OSM. Scheduled
full/incremental backups are addedto the crontab of axadmin from
OSM.
3BK 20903 AAAA PCZZA Ed.13 25 / 222
-
2 Backup and Restore of OMC-R
2.1.2 Type and Rotation of TapesEach backup, full or
incremental, uses one tape. Use 160 meter extra-longtapes. Never
put more than one backup on a tape. As an absolute minimum,two sets
of tapes are recommended in case of trouble with one of the sets.
Forsecurity reasons, three sets of tapes would increase security
significantly.For example, having two sets of tapes allows rotation
of tapes (see thefollowing figure). The tapes for Full Backup 1 can
be reused for Full Backup3. Tapes used for Incremental Backup 1.1
can be reused for IncrementalBackup 1.3 and so on.
123456
123456
123456
12
12
12
12
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
Set 1 Set 2 Set 3
Full Backup 1 Full Backup 2 Full Backup 3
IncrementalBackup 1.1
IncrementalBackup 1.2
IncrementalBackup 1.3
IncrementalBackup 1.4
IncrementalBackup 2.1
IncrementalBackup 2.2
IncrementalBackup 2.3
IncrementalBackup 2.4
IncrementalBackup 3.1
IncrementalBackup 3.2
IncrementalBackup 3.3
IncrementalBackup 3.4
.
.
.
.
.
.
.
.
.
Figure 2: Type and Rotation of Tapes
26 / 222 3BK 20903 AAAA PCZZA Ed.13
-
2 Backup and Restore of OMC-R
2.1.3 Backup ProcessIn the following figure, Full Backup 1.0
saves the files. Incremental Backup 1.1saves the files modified
since Full Backup 1.0. Incremental Backup 1.2 and 1.3also save all
the files since Full Backup 1.0. Full Backup 2.0 saves all the
files.TIMESTAMP_INSTALL
Full Backup 1.0
Incremental Backup 1.1
Incremental Backup 1.2
Incremental Backup 1.3
Full Backup 2.0
Back
s up
file
s wi
thtim
esta
mps
you
nger
than
Figure 3: Backup of Modified Files
2.1.3.1 Full BackupRegardless of hardware, the Full Backup
process works in the same way.The backup script performs the
following:1. The MPM application is stopped and the Database access
is suspended, in
order to keep all the OMC-R data consistent. UNIX continues to
operate.2. Mirrored disks are detached. For Veritas Filesystems, a
"snapshot" is
taken of the file systems.3. The database is released and MPM is
restarted. The OMC-R is operational.4. The OMC-R restarts. In a
mirrored disk system, the OMC-R only runs on one
disk set during the backup time, while the other detached set is
backed up.5. The OMC-R data is loaded onto tape.6. The mirror disks
are re-attached and the disks that were used for the backup
are updated with the changes that occurred on the active disk
during thebackup. The snapshots are destroyed.
7. The backup completes.
2.1.3.2 Incremental BackupAn incremental backup procedure is
similar to a full backup.
3BK 20903 AAAA PCZZA Ed.13 27 / 222
-
2 Backup and Restore of OMC-R
2.2 Perform a Full or Incremental BackupBefore you backup, you
must have:
Administrator access to the A1353-RA
Access to the tape drive(s) of Master and AgentAn unused tape
for every server that requires backup (see Type andRotation of
Tapes (Section 2.1.2) ).
Note: It is necessary to have a tape for each machine in an
Xlarge configurationwhere there is a Master-Agent relationship.
The following prerequisites apply:Before you backup, verify that
the tapes on which the backup is performed,function correctly:
mt -f sta
where is the tape device on which the backup was made (by
default/dev/rmt/0cn ).To check the state of the metadevices, from a
console type the command:
metastat
Wait for the end of the verification of each disk before
continuing. Replaceany disks whose state is not Okay .
28 / 222 3BK 20903 AAAA PCZZA Ed.13
-
2 Backup and Restore of OMC-R
2.2.1 Perform a Full Backup from OSMNote: There is an outage of
2 minutes during the backup.
When inserting a tape, be sure that it is positioned at the
beginning (it isrewinded).If the data of the Master can not be
stored on one tape, a set of tapes must beused. When the tape is
full, a window will ask for the next tape.
Procedure To perform a full backup from OSM:1. Log in as an
administrator.2. Put a new tape(s) into the tape drive(s) of the
Master and each Agent
(in case of Xlarge configuration).3. From the OSM Administration
Facilities Main Menu, select Administration
-> Backup/Restore -> Backup now .4. Enter the device path
in the Device field or keep the default device path
(/dev/rmt/0cn ) that is proposed. In case of XLarge
configuration the samedevice path is used on all the machines
(Master and each Agent).
5. Click on [ Apply ] to start the backup.If the tape is full
(on Master), a pop-up window is displayed with themessage: The tape
is full. Please insert next tape and justafter press OK button.
Remove the tape from the drive. Insert a new tape and click on [
OK ]button from the pop-up window.
6. The system carries out the backup steps and sends an e-mail
to the userwho started the backup when the backup is complete.If
the sent message contains the text:
Backup completedthe backup is complete. If the message contains
the text:
Backup completed: warningthe backup is incomplete. Check the
resulting UNIX logs in:/alcatel/var/maintenance/log/to diagnose the
problem. As well as being stored on the system, this log isalso
saved on the tape.If the message contains the text:
FailureThe backup failed. Check the resulting UNIX logs
in/alcatel/var/maintenance/log/to diagnose the problem. As well as
being stored on the system, this log isalso saved on the tape.
7. After the backup is complete, store the tape in a safe place
so it is availablefor the restore in case of a system crash.
3BK 20903 AAAA PCZZA Ed.13 29 / 222
-
2 Backup and Restore of OMC-R
2.2.2 Schedule a Full Backup from OSMNote: There is an outage of
2 minutes during the backup.
If the data of the Master can not be stored on one tape, a set
of tapes must beused. When the tape is full, a window will ask for
the next tape.
Procedure To schedule a full backup:1. Log in as an
administrator.2. Put a new tape(s) into the tape drive(s) of the
Master and each Agent
(in case of Xlarge configuration).3. From the OSM Administration
Facilities Main Menu, select Administration
-> Backup/Restore -> Schedule Backup .4. Enter the device
path in the Device field or keep the default device path
(/dev/rmt/0cn ) that is proposed. In case of XLarge
configuration the samedevice path is used on all the machines
(Master and each Agent).
5. Enter the time the backup is to be performed in the Hour
field.6. Enter the day the backup is to be performed in the Day
field.7. Enter the month the backup is to be performed in the Month
field.
The system carries out the backup at the defined time and sends
an e-mailto the user who started the backup when the backup is
complete.
8. Click on [ OK ] to accept the scheduling.9. The backup will
start at the given time.
If the tape is full, a pop-up window is displayed with the
message: Thetape is full. Please insert next tape and just after
pressOK button.
Remove the tape from the drive. Insert a new tape and click on [
OK ]button from the pop-up window.
10. Store the tape in a safe place so it is available for the
restore in case of asystem crash.
2.2.3 Perform an Incremental Backup from OSMProcedure To perform
an incremental backup from OSM:
1. Log in as an administrator.2. Put a new tape(s) into the tape
drive(s) of the Master and each Agent
(in case of Xlarge configuration).3. From the OSM Administration
Facilities Main Menu, select Administration
-> Backup/Restore -> Incremental Backup now .4. Enter the
device path in the Device field or keep the default device path
(/dev/rmt/0cn ) that is proposed. In case of XLarge
configuration the samedevice path is used on all the machines
(Master and each Agent).
5. Click on [ Apply ] .The system carries out the backup
steps.
6. Store the tape in a safe place so it is available for the
restore in case of asystem crash.
30 / 222 3BK 20903 AAAA PCZZA Ed.13
-
2 Backup and Restore of OMC-R
2.2.4 Schedule an Incremental Backup from OSMProcedure To
schedule an incremental backup from OSM:
1. Log in as an administrator.2. Put a new tape(s) into the tape
drive(s).3. From the OSM Administration Facilities Main Menu,
select Administration
-> Backup/Restore -> Schedule Incremental Backup .4. Enter
the device path in the Device field or keep the default device
path
(/dev/rmt/0cn ) that is proposed. In case of XLarge
configuration the samedevice path is used on all the machines
(Master and each Agent).
5. Enter the time the backup is to be performed in the Hour
field.6. Enter the date the backup is to be performed in the Day
field.7. Enter the month the backup is to be performed in the Month
field.8. Click on [ OK ] to accept the scheduling.
The system carries out the backup steps at the defined time and
sends ane-mail to the user who started the backup when the backup
is complete.
9. Store the tape in a safe place so it is available for the
restore in case of asystem crash.
2.2.5 Verify the Amount of Data Stored on Tape after an OMC
BackupThe amount of data stored on a tape after an OMC backup can
be verifiedfrom Master .From OSM Administration Facilities:1. Log
in as an administrator.2. Insert the tape (if not already inserted)
in the tape drive of the Master .3. Select Administration ->
Backup/Restore -> Get Tape Usage4. In the Device field, the path
to the default tape drive is typed. If the tape
drive is different from the default one, type the path to that
device.5. Press the [ Get usage ] button.6. When the green Finish
notification appears, the Blocks and Size text
fields represents the final values.
3BK 20903 AAAA PCZZA Ed.13 31 / 222
-
2 Backup and Restore of OMC-R
2.3 Perform a RestoreImportant Before you perform a restore,
take note of the following:
B9 CD1 and CD3 must be availableRestores are always done
off-line
Resynchronization of the system can be necessary to
ensuresynchronization between the time of the last backup and the
time of thesystem failure.This is not part of the restore
procedure.
2.3.1 PrerequisitesBefore you restore, you must be in Multi User
Mode . You must also have:
B9 A1353-RA CD1 and CD3 corresponding with the installed
softwareversion.
The restore script: MF-improved_restore.sh (contained on CD3)The
most recent full backup tape and the most recent
correspondingincremental backup tapes.
You must restore the full backup tape(s) first and then the most
recentincremental backup tape(s). Otherwise, if you install in the
reverse order,nothing prevents the full backup information from
overwriting the incrementalbackup, and you have an inconsistent
file system.
System Administrator (root) access rights to the A1353 -
RAAdministrator access rights to the A1353-RA
Note: In the case of an XLarge Configuration, it is necessary to
perform the restoreprocedure on each individual machine (Master and
Agent) to be restored.When inserting a tape, be sure that it is
positioned at the beginning (it isrewinded).If the full backup was
performed using a set of tapes (on the same machine),start with the
first tape.
32 / 222 3BK 20903 AAAA PCZZA Ed.13
-
2 Backup and Restore of OMC-R
2.3.2 Restore Procedure
2.3.2.1 Perform RestoreTo perform a restore:1. In case of SF
V490 with 3510FC Array, perform first Prepare SUN StorEdge
3510FC Array (Section 2.4) .2. Install B9 CD1 . Contact Alcatel
personnel to do this.3. After B9 CD1 installation, the following
menu is displayed:
1) Insert CD2 and continue with installation
2) Exit to shell in order to get/install the licenses
3) Resume system initialisation
Type [ 3 ] .4. Wait until the system comes up and log in as root
user.5. If a StorEdge Array 3510 is attached to the machine,
perform the following
steps:
Insert CD1, if not already inserted, and type:cd
/cdrom/cdrom0/s0/.install_configcp -pr S77_3510.cd2.*
/etc/rc2.d/chmod 0755 /etc/rc2.d/S77_3510.cd2.*
To save time, perform step (7) now.Check if the RAID
initialization is done as root :# scclisccli> sh ld
Verify if the Status is Good and only after that reboot the
machine:init 6
Wait until the system comes up and log in as root user.6. For
E4500 systems only , you must reboot the station, if it is not
automatically done:init 6
Log in as root user.7. Insert B9 CD3 and copy the restore
scripts:
cd /var/tmpcp /cdrom/cdrom0/MF-improved_restore_OMC.sh .cp
/cdrom/cdrom0/MF-improved_restore_OMC.pl .cp
/cdrom/cdrom0/x_message_restore .cp /cdrom/cdrom0/INDSplmod_*.gz
.gzip -cd INDSplmod_*.gz | cpio -icdumDpkgadd -d .
Install the package INDSplmod_ .
3BK 20903 AAAA PCZZA Ed.13 33 / 222
-
2 Backup and Restore of OMC-R
8. Search the corresponding device for the root and usr
partition:df /usr / | awk {print $1 " " $2}/usr (/dev/md/dsk/di/
(/dev/md/dsk/dk
where di is the /usr corresponding device and dk is the root (/
)corresponding device.Check the usr and root mirrors status:
# metastat di dk | grep -i syncWait for the end of the root and
usr mirrors resynchronization beforecontinuing. In case of disks
failure, replace any disks whose state is not ok.
9. To start the restore, load the first tape of the full backup
and enter thefollowing command:
/var/tmp/MF-improved_restore_OMC.pl -dev:-skipcheck
Where is the tape device on which the backup was made (bydefault
/dev/rmt/0cn ).
10. If a set of tapes was used for the backup (on Master), all
the tapes mustbe restored.When the restore of a tape is finished, a
pop-up window is displayed:This tape is restored. Please insert
next tape and push ENTERin the restore window. Just after push OK
button. Performthe following:
Push the eject (unload) button of the tape drive and replace the
tape.Insert the next tape, open a new terminal and type:
mt -f staCheck that the tape was loaded.
In the terminal window where the restore script was started
press[ ENTER ] .In the pop-up window push the [ OK ] button.
11. The system will reboot when the restore is finished.12.
Search the corresponding device for the root and usr partition:
df /usr / | awk {print $1 " " $2}/usr (/dev/md/dsk/di/
(/dev/md/dsk/dk
where di is the /usr corresponding device and dk is the root (/
)corresponding device.Check the usr and root mirrors status:
# metastat di dk | grep -i syncWait for the end of the root and
usr mirrors resynchronization beforecontinuing.
13. Load the tape of the last incremental backup. If you do not
have anincremental backup, go to Step (16) .
14. Enter the following command as root to restore the
incremental backup:
/alcatel/omc3/backup/script/MF-improved_restore_OMC.sh-dev:
Where is the tape device on which the backup was made (bydefault
/dev/rmt/0cn ).
34 / 222 3BK 20903 AAAA PCZZA Ed.13
-
2 Backup and Restore of OMC-R
15. The system will reboot when the restore is finished.The
system is fully restored.
16. From a console, log in as root user.17. Delete the UNIX lock
files in the following directory:
cd /alcatel/var/share/ntermrm .omc3_session_[hostname]*
18. Reboot each HMI, after all backup data is restored:init
6
2.3.2.2 Restart the OMC-RWhen the restore is finished (Master
and each Agent in case of Xlarge),restart the OMC-R:1. Log in as
axadmin on the Master Host.2. Start the OMC-R process by entering
the following command from a
Terminal window:sudo /alcatel/omc3/osm/script/MF-start
If the system does not start, contact Alcatel support.3. Once
the system is restarted, resynchronize all workstations. From
the
A1353-RA Icon Box, select OSM Administration Facilities Main
Menu-> Configuration -> Workstation Management ->
ResynchronizeWorkstation .This displays a dialog box.
4. Select all the displayed check boxes and click on [ Apply ]
.This resynchronizes all workstations.
5. Perform the task Discover BSS on each BSC (using BSSUSM).6.
From the RNUSM, check adjacency inconsistencies:
General -> Query Ajacencies InconsistenciesIf the check
result is not OK, contact Alcatel support.
3BK 20903 AAAA PCZZA Ed.13 35 / 222
-
2 Backup and Restore of OMC-R
2.4 Prepare SUN StorEdge 3510FC ArrayIn case of using SF V490
with Sun StorEdge 3510FC Array, before startingCD1 installation the
following preparation is needed.A serial connection to the 3510FC
Array must be used . For this you need aserial cable and a machine
with a serial port. The machine can be a PC withWindows or a
station with Solaris.1. Connect the serial port COM1 of the first
controller to the serial port of
your station.Set up the serial connection to the Sun StorEdge
3510FC Array:
from Solaris :# tip -38400 /dev/term/aconnected
Press [ Control ] + [ L ] simultaneously. Press [ ESC ] for all
the receivednotification messages.From the terminal connection menu
select: Terminal (VT100) Mode .
from Windows :Create a new HyperTerminal connection with the
following parameters:
Use: COM1Bits per second: 38400Data bits: 8Parity: noneStop
bits: 1Flow control: Hardware -----> Press Ctrl + L to refresh
window
2. From the < Main Menu > follow the menus: Configuration
parameters ->Host-side Parameters -> Fiber Connection Option
and select Loop only .
The following message appears: Set Fiber Channel
connectionoption?Select NO
The following message appears: Change made to these settingswill
NOT take effect until the controller is RESET. Priorto resetting
the controller, operation may not proceednormally. Do you want to
reset the controller now?Select NO.
3. From the < Main Menu > follow the menus: Configuration
parameters-> Host-side Parameters -> Peripheral Device Type
Parameters ->Peripheral Device Type and select Enclosure
Services Device(Type=0xd)The following message appears: Set
peripheral device type?Select default value (No)
4. From the < Main Menu > select view and edit Host luns
.A list with the host channels is displayed (host channel example:
CHL 0ID 40 Primary Controller).
5. For each host channel perform the following actions.To select
a host channel, press [ Enter ] on it (do not select "Edit
Host-ID").
36 / 222 3BK 20903 AAAA PCZZA Ed.13
-
2 Backup and Restore of OMC-R
If a selection box is displayed, there is no logical drive
mapped on thischannel. Press [ ESC ] to go back to the host
channels list.If a list with mapped LUNs is displayed, there are
logical drives mapped onthis channel.Make sure that there is only
one host channel and this host channelhas only one LUN mapped on
it.All LUNs except this one LUN must be deleted. To delete a LUN,
press[ Enter ] on it and select [ Yes ] from the confirmation box.
Press [ ESC ] togo back to the host channels list.
3BK 20903 AAAA PCZZA Ed.13 37 / 222
-
2 Backup and Restore of OMC-R
6. When the LUN deleting is finished, press [ ESC ] to go back
to the < MainMenu > .Select system Functions , after select
Reset controller and confirmwith [ Yes ] .Wait for the terminal
connection menu.Close the terminal.
38 / 222 3BK 20903 AAAA PCZZA Ed.13
-
3 Access Rights Management
3 Access Rights Management
Access rights management covers:
Password Policy
User Management
OAD Management.
Operator/Terminal Profile Management
FAD Management
FTP Users
3BK 20903 AAAA PCZZA Ed.13 39 / 222
-
3 Access Rights Management
3.1 IntroductionThe access rights management service is provided
to allow the managementof UNIX users. It provides graphical
interfaces which encapsulate the basicUNIX commands relative to
user management. New users can be added, userprofiles can be
modified and users can be deleted. All users are added tothe OMC-R
group.User accounts should only be modified from OSM. Otherwise, if
you change itfrom UNIX you create an inconsistency between OSM and
UNIX.It is possible to associate an object/group of objects to a
FAD/ApplicationFunction(s) inside a profile. For examples a user
may have administration rightson some objects and supervision
rights only, on other objects.
3.2 Password PolicyThe Password Policy is a set of rules used
for checking the users passwords.
3.2.1 Default Password Rules
The administrator has to reset the user password when the user
passwordis locked.
If a user password expires, the message is "login incorrect" (in
CDE). Thesame message is displayed in the CDE window, regardless of
whether theentered password is incorrect, or the password for that
user is expired.
The administrator can have a global view of the user passwords -
lockedor unlocked, by using the /alcatel/omc3/bin/unlockaccount
script(used as root user).
3.2.1.1 CompositionPassword composition rules are customizable.
The following table showsthe default password composition:
Parameter Default Value Description
MIN_LENGTH (*) 6 Minimum password lengthMAX_LENGTH 16 Maximum
password length
NB_LETTERS 1 Minimum number of letters in user password
NB_NUMBERS 1 Minimum number of digits in user password
NB_CAPITALS 1 Minimum number of uppercase characters in
userpassword
NB_SPECIAL_CHARS 1 Minimum number of special characters (see
below) inuser password
MAX_DAYS (*) 90 Number of days before password
expiresWARNING_DAYS (*) 8 Number of days warning before password
expires
40 / 222 3BK 20903 AAAA PCZZA Ed.13
-
3 Access Rights Management
(*) : used from LDAP password policyTable 3: Password
Composition Rules Description
The default special character list
is:$[]{}()*+?^&=-!@%_~,:;.|\/"
3BK 20903 AAAA PCZZA Ed.13 41 / 222