A new dimension in fence design. - thempc.org 14... · Fence posts are of sufficient length to allow for setting into concrete footers. ... “TWINBAR FORTRESS Standard ... • Lightweight

High Security Fence Systems

A new dimensionin fence design.

A new dimensionin fence design.

F E N C E & R A I L I N G S Y S T E M Sb y A t l a n t i s P r o d u c t s , I n c .

02825/AMEBuyLine 132



F E N C E & R A I L I N G S Y S T E M S

Take Grigliato.The mesh patterns areavailable in a considerablerange of sizes and strengths.As for color and configuration,your discretion dictates.

Take Grigliato.The mesh patterns areavailable in a considerablerange of sizes and strengths.As for color and configuration,your discretion dictates.

In fact, great for everything from window guardsand trash enclosures to stairwells and displays.

Why, you can even use Grigliato arounda football stadium.

In fact, great for everything from window guardsand trash enclosures to stairwells and displays.

Why, you can even use Grigliato arounda football stadium.

r

For a catalog of our railing and fencing systems,please call us at1-877-638-2526,

or fax us at 630-627-7912.

For a catalog of our railing and fencing systems,please call us at1-877-638-2526,

or fax us at 630-627-7912.2

GR IGL IATO Fencing System

Metalco product specifications may change at any time without notice due to ongoing improvements.For a complete list of our product line, please visit our web site at www.metalco.tv.


With Twinbar from Metalco, you get a wire meshfencing system that’s more durable and stylishthan chain link. Yet, the cost is very affordable.And Twinbar is backed with a long-term warran-ty. It’s also easier to install, doesn’t rattle andcomes in long-lasting colors.

3

TWINBAR Fencing System

Metalco fence and railing panels are protected by what we believe is the best finish available today. The computer controlled hot-dipgalvanizing and the thermosetting polyester powder finish give the Metalco System the highest possible protection against rust and

corrosion. The advanced polyester powder coating technology is environmentally friendly (no solvents, lead-free) and offers a large color selection.

02825/AMBuyLine 13

Before andBefore andAfterAfter..........

With Twinbar from Metalco, you get a wire meshfencing system that’s more durable and stylishthan chain link. Yet, the cost is very affordable.And Twinbar is backed with a long-term warran-ty. It’s also easier to install, doesn’t rattle andcomes in long-lasting colors.


Fence Style GRIGLIATO The Grigliato System is an affordable modular system, which is practical,durable and sturdy. It provides a wide variety of design solutions, includingretrofit applications. Grigliato is an electro-forged welded steel panel, hot-dipgalvanized in accordance to ASTM 123B, and features our extremely durablepolyester powder finish.Fence posts are of sufficient length to allow for setting into concrete footers.The recommended standard fence post spacing is 78" (2OOOmm) apart;however, drawings will call out special spacing when required. In-groundposts may be set in concrete into a hole 12" (303mm) in diameter for terminalposts and 10" (254mm) in diameter for intermediate posts. Concrete shouldbe 6" (152mm) deeper than posts. Deeper and wider settings may be neces-sary in some locations.Grigliato "A"Characteristics: Widely used for fence and railing designs. Hard to climb rec-tangular mesh.Specify: Electro-forged welded steel panel. Type Metalco® Grigliato "A" byAtlantis Products, Inc., Tel. 877-638-2526. 2 7/16”x 5 3/16” (62x130) mesh,31/32”x 1/8” (25x3) main bar, 3/16” (5) cross rod. Galvanized to ASTM 123and/or polyester powder coated.Grigliato "B"Characteristics: Square mesh style. Very sturdy and hard to climb. Clean lines.Specify:Electro-forged welded steel panel. Type Metalco® Grigliato "B" byAtlantis Products, Inc., Tel. 877-638-2526. 2 7/16”x 2 19/32” (62x65) mesh,31/32”x 1/8” (25x3) main bar, 3/16” (5) cross rod. Galvanized to ASTM 123and/or polyester powder coated.Grigliato "C" Characteristics: Square mesh style. Light in appearance with good “seethrough” capability. Limitation: This model is easy to climb.Specify: Electro-forged welded steel panel. Type Metalco® Grigliato "C" byAtlantis Products, Inc., Tel. 877-638-2526. 3 15/16”x 3 15/16” (62x65) mesh,31/32”x 1/8” (25x3) main bar, 3/16” (5) cross rod. Galvanized to ASTM 123and/or polyester powder coated.Grigliato "D"Characteristics: Rectangular mesh style. Very sturdy and hard to climb. Specify: Electro-forged welded steel panel. Type Metalco® Grigliato "D" byAtlantis Products, Inc., Tel. 877-638-2526. 2 7/16”x 5 3/16” (62x130) mesh,1 3/16”x 5/32” (30x5) main bar, 1/4” (6) cross rod. Galvanized toASTM 123 and/or polyester powder coated.Grigliato "H" Characteristics: See Grigliato “B”Specify: Electro-forged welded steel panel. Type Metalco® Grigliato "H" byAtlantis Products, Inc., Tel. 877-638-2526. 2 3/8”x 2” (62x50) mesh,1”x 1/8” (25x3) main bar, 3/16” (5) cross rod. Galvanized toASTM 123 and/or polyester powder coated.Grigliato "J"Characteristics: Square mesh style. Light in appearance with good “seethrough” capability. Limitation: This model is easy to climb.Specify: Electro-forged welded steel panel. Type Metalco® Grigliato "J" byAtlantis Products, Inc., Tel. 877-638-2526. 4 7/8”x 5 3/16” (125x130) mesh,31/32”x 1/8” (25x3) main bar, 3/16” (5) cross rod. Galvanized to ASTM 123and/or polyester powder coated.Grigliato "K" Characteristics: See Grigliato “B”Specify: Electro-forged welded steel panel. Type Metalco® Grigliato "Kby Atlantis Products, Inc., Tel. 877-638-2526. 1 21/32”x 5 3/16” (40X130) mesh,31/32”x 1/8” (25x3) main bar, 3/16” (5) cross rod. Galvanized to ASTM 123and/or polyester powder coated.Grigliato "L" Characteristics: See Grigliato “B”Specify: Electro-forged welded steel panel. Type Metalco® Grigliato "L"by Atlantis Products, Inc., Tel. 877-638-2526. 1 21/32”x 1 3/4” (40x45) mesh,31/32”x 1/8” (25x3) main bar, 3/16” (5) cross rod. Galvanized to ASTM 123and/or polyester powder coated.The installed system can be designed to be capable of withstanding1) a concentrated load of 200 lbs. applied at any point in any direction 2) auniform load of 50 lbs. per linear ft. applied horizontally and concur-rently with uniform load 100 lbs. per linear ft. appliedvertically downward. The infill area of the guardrail system is capable ofwithstanding a horizontal concentrated load of200 lbs. applied to 1 sq.ft. at any point in the system.

Fence Style TWINBARElectro-forged welded steel fencing that is galvanized and powderpolyester coated. The panels are made of an electro-forged wire mesh.The vertical rods are placed (sandwiched) between two horizontal rods.The rods are electro-forged welded at each crossing. The standard panellength is 8’-3”. The Twinbar panels are available in different mesh sizesand different material strengths. The panels are prefabricated for heightsfrom 2’ to 8’. Heights of more than 8’ are accomplished by combiningpanels with a different or equal height. Special panels for corners withdifferent angles are available on request. The posts are made of squaretubular steel of different sizes depending on the required overall height.The panels are mounted onto the front of the posts with pre-assembledmounting brackets or with a pre-assembled lock bar. All post-panelconnections are utilizing a patented nylon setting to reduce rattlingnoise caused by wind, vibrations or other sources. The mesh size isdesigned according to code. A sphere of 4” cannot pass through theopenings.TWINBAR types available:

“TWINBAR FORTRESS Standard”Mesh size 2”x8” (50x200mm) on centerVertical rods are dia. 1/4” (6mm), 2 Horizontal rods are dia. 5/16”(8mm)Panel Width and Post Spacing 8’-3” (2510mm)Fence Types and Height available.

Panel Height Mesh Size available Post Type4’-0” (1230) 2”x 8” (50x200) 2 3/8” x 1 1/2 ”(60x40)5’-3” (1630) 2”x 8” (50x200) 2 3/8” x 1 1/2 ”(60x40)6’-0” (1830) 2”x 8” (50x200) 2 3/8” x 1 1/2 ”(60x40)7’-3” (2230) 2”x 8” (50x200) 2 3/8” x 1 1/2 ”(60x40)8’-0” (2430) 2”x 8” (50x200) 2 3/8” x 1 1/2 ”(60x40)Custom Heights from 2’-0” up to 20’-0” available

See our website for information about our Screenand Railing Systems: www.metalco.tv or call us at

1-877-638-2526

AAtlantis Ptlantis Prroducts,oducts, IInc.nc.TTel:el: 630-971-9680630-971-9680

877-708-2526877-708-2526FFax:630-971-9860ax:630-971-9860wweb:eb: wwwwww.metalco.metalco.tv.tve-mail:e-mail: info@[email protected]

MR-MANUFACTURERATLANTIS PRODUCTS, INC. offers technical assistance to architects, engineers, contractors, owners and facility managers regarding the design and installation of our products.We have provided many custom solutions for unusual situations. Let our experienced engineers assist you in determiningthe optimum design for your project. Please contact us toll free at 1-877-638-2526 to obtain our services. You also cancontact us by e-mail [email protected] or visit our Web site at www.metalco.tv for additional information.

Printed in the U.S.A.

Specifications

See our catalog or visit our web site for more diagrams.

Grigliato “A” Grigliato “B”

WARRANTY:WARRANTY:15 Y15 Year limitedear limitedwwarrarrantanty againsty againstrust and corrosionrust and corrosionon these products.on these products.See website forSee website fordetailed wdetailed warrarrantantyyinfoinfo..

THIS DRAWING IN DESIGN AND DETAIL IS THE SOLE PROPERTY OF METALCO

(ATLANTIS PRODUCTS, INC. ) AND MAY NOT BE USED FOR ANY PURPOSE

WHATSOEVER OTHER THAN FOR OUR MANUFACTURING FACILITY AND

INSTALLATION OF OUR PRODUCTS. THIS DOCUMENT OR ANY PART

THEREOF MAY NOT BE REPRODUCED IN ANY MANNER WHATSOEVER AND

SHALL BE RETURNED TO US UPON REQUEST.

ALL RIGHTS RESERVED.

Hole Size: 1/2" Round on 11/16" Staggered Ctrs

Style: Round Perforation

Open Area: 48%

MemberMetals ServiceCenter Institute

®

www.mcnichols.com • 1-800-237-3820McNICHOLS CO.

05 75 00McNICHOLS® Perforated Metal - Round

Perforated Metal - Round

General Specifications

©2006 McNICHOLS CO. All rights reserved.

0609

Photo not to exact scale.

MemberMetals ServiceCenter Institute

Member

Member

Meta l

s Service Center Institute

®

Meta l


®

Member

Meta l


®

www.mcnichols.com • 1-800-237-3820McNICHOLS CO.

05 75 00McNICHOLS Decorative Perforated Metal

Perforated Metal

• Aesthetic appeal

• Accurate opening sizes

• Many hole size choices

• Good strength to

weight ratio

• Versatile in application

• Choice of hole shape

• Variety of design styles

• Lightweight metal options

• Unique design

• Functionality

• Ventilation properties:

air, light, fluid & sound

• Choice of gauges

• Variety of materials

• Unique pattern designs

• Many pattern choices

• Popularity

• Sunshades/screens

• Architectural panels

• Lighting

• Decorative accents

• Facades

• Exhibits

• Grilles, screens, vents

• Acoustical panels

• Furniture

• Partitions

• Infill panels

• Sign panels

• Store fixtures

• Column covers

• Fencing and gates

• Ceiling panels

• Panels for cabinets

• Sculpture/art media

Consider application or end use:Physical requirements(strength, open area, environ-ment, etc.).

Consider design properties:Appearance, functionality, flexi-bility, ventilation properties (air,light, fluid and sound passage),style, uniqueness, etc.

Specify: McNICHOLS®Quality Perforated MetalPattern or Description. Seeindividual spec sheets orwebsite for identification.

Material type: Varies by patternchoice. See individual specsheets or website.

Thickness: Specify gauge orthickness in inches.

Hole size, shape and arrangement:Hole opening size, shape andstraight or staggered row, ifapplicable.

Size: Available 3' x 8' or 10',4' x 8' or 10' or other sizes.

Hole Centers: Center to centermeasurement between twoadjacent holes.

Quantity: Number of sheets orcut to size pieces required.

Blank Margins: Standard orspecial requirement.

Flatness: Requirements, if any.

End Pattern: Finished or unfin-ished.

How To Specify

Applications

Features & Benefits

An Architectural Design Consultant is ready to help you selectsuitable products for your application. To view additionalMMccNNIICCHHOOLLSS Products, be sure to visit www.mcnichols.com.

0609

511 521Product Line

INDUSTRY LEADING COMMERCIAL & INDUSTRIAL SOLUTIONS

Aluminum Door Systems

An Attractive Solution for Maximum Visual Access and Light Infiltration

GENERAL FEATURES AND BENEFITS

Durable Construction for Years of Reliable Operation

• 13/4"(45mm)thick,corrosion-resistant6063-T6aluminum sectionswithgalvanizedfixturesandhingespromotes durabilityandtrouble-freeoperation• 1/4"(6mm)diameterthrough-rodsonallstilesandrails enhancesstrengthandsturdiness• Top-qualitymaterials,excellentfieldserviceandoptional maintenanceprogramcontributetoextendeddoorlife, lowmaintenancecostsandmaximumproductivity

A Variety of Standard Features and Options

• Doorsupto26'11"(8204mm)wideand 20'1"(6121mm)high• GlazingchoicesincludeDSBglass,plexiglass,tempered glass,clearLexan®,multi-wallpolycarbonateandwireglass• Standardclearanodizedfinishforlow-maintenanceand corrosion-resistance• Optionalfinishesincludebronzeanodizationoravariety ofstandardpowdercoatpaintcolors• Manualpullropeoperationwithoptionalchainhoistor electricmotoroperator

Information is subject to change. Please call your local Overhead Door distributor for special applications or if your application is not listed.

Pane

l thi

ckne

ss

Max

. wid

th

Max

. hei

ght

Rails

St

anda

rd m

ater

ial

Rails

St

anda

rd fi

nish

Cent

er st

ile w

idth

s

End

stile

wid

ths

Top

rail

widt

hs In

t erm

ediat

e ra

ilpa

ir wi

dths

Botto

m ra

il wi

dths

SE

RIE

S

GENERAL SPECIFICATIONSAluminum

Sectional 511 1 3/4” 16’2” 16’1” 6063–T6 204R–1 clear 21/32” 2 3/4” 2 3/8”, 3 3/4” 1 3/8” 2 3/8”,3 3/4”,4 1/2” (45 mm) (4928 mm) (4902 mm) aluminum anodized (17 mm) (70 mm) (60 mm, 95 mm) (40 mm ) (60 mm/95 mm/114 mm)

Sectional 521 1 3/4” 26’11” 20’1” 6063–T6 204R–1 clear 2 11/16” 3 5/16” 2 3/8”, 3 3/4” 3 11/16” 3 3/4”,4 1/2” (45 mm) (8204 mm) (6121 mm) aluminum anodized (68 mm) (85 mm) (60 mm, 95 mm) (94 mm) (95 mm/114 mm)

1/8”

(3 m

m) D

SB

1/

8” (3

mm

) or 1

/4”

(6 m

m)

pl

exig

lasss

1/8”

(3 m

m) o

r 1/4

” (6

mm

)

tem

pere

d

1/

8” (3

mm

) or 1

/4”

(6m

m)

cle

ar L

exan

®

1/4”

(6 m

m) w

ire g

lass

1/2”

( 12m

m) i

nsul

ated

glas

s

Elec

tric

oper

ator

Botto

m se

nsin

g ed

ge

Chain

hoi

st

3” tr

ack

Brac

ket m

ount

ing

High

-cycle

sprin

gs

Posi-

Tens

ion

drum

s

Pass

doo

r

Exha

ust p

orts

Bron

ze a

nodi

zatio

n

Powd

er c

oat p

aint f

inish

SE

RIE

S

AVAILABLE OPTIONS

c c c c c c c c c c c c c c c c

c c c c c c c c c c c c c c c c c

511

521

Sectional

Sectional

1-800-887-DOOR

Selection of Overhead Door products automatically includes the unequaled expertise and experience of

Overhead Door Red Ribbon Distributors. Nationwide coverage by our over 400 Red Ribbon Distributors is

unique in our industry–providing a single source for design and application consulting, installation, service and

ongoing maintenance. Turnkey services to maximize the lasting value of your product choice. Your Overhead

Door distributor is also your only source for a full line of commercial and industrial door and operator systems

specifically designed for integrated applications. For over four generations, our Red

Ribbon Distributors have been committed to providing commercial and industrial door

solutions. Combined with Overhead Door product design and manufacturing superiority,

our distributors are a proud part of the Overhead Door family, sharing our name, our

Ribbon logo and our commitment to industry leading innovation and excellence.

THE TURNKEY SOURCE FOR COMMERCIAL AND INDUSTRIAL SOLUTIONS AND SERVICE

1

AluminumDoor Systems

Overhead Door Corporation’s aluminum sectional doors offer an attractive solution for commercial

and industrial applications where visual access, light infiltration and aesthetics are key design

considerations. Offered with a variety of stile widths, glazing materials, track styles, and finish

options—andinsizesupto26'11"(8204mm)wideand20'1"(6121mm)high—thesedoorsfeature

1 3/4"(45 mm) sections and 1/4 " (6 mm) diameter through-rods for strength and stability. A clear-

anodized204R-1standardfinishaffordscorrosionresistance,andbronzeanodizationandaspectrum

of powder coat paint finishes are additionally available. Ideal for service stations, fire stations,

professionalfacilitiesandretailenvironments,oursectionalaluminumdoorsarepractical,durableand

handsomelystyled—andengineeredforlonglife,lowmaintenanceandenduringbeauty.

Installation and Service provided by Overhead Door Company of Southwestern Idaho Series 521 Clear Anodized

2OVERHEAD DOOR CORPORATION

Sectional Aluminum Doors

The 511 Series doors are designed in sizes up to 16’2” wide and 16’1” high (4928 mm and 4902 mm). Featuring a narrow center stile width of 21/32” (17 mm), these doors are sleek, attractive and permit maximum visibil-ity. An array of glazing choices, top-and bot-tom-rail widths, finishes and special options customizes the 511 Series to satisfy nearly any project requirement.

Standard Features At a Glance

Panelthickness 13/4"(45mm)Maximumstandardwidth 16'2"(6147mm)Maximumstandardheight 16'1"(4902mm)Material 6063-T6 aluminumStandardfinish 204R-1 clearanodizedCenterstilewidth 21/32"(17mm)Endstilewidth 23/4"(70mm)Toprailwidth 23/8"(60mm) or33/4"(95mm)Topintermediaterailwidth 3/4"(19mm)Bottomintermediaterailwidth 5⁄8"(16mm)Bottomrailwidth 23/8"(60mm)or 33/4"(95mm)or 41/2"(114mm)Weatherseals Bottom,flexible PVCStandardsprings 10,000cycleTrack 2"(51mm)Mounting AngleOperation ManualpullropeHingesandfixtures GalvanizedsteelLock Galvanized, interior-mounted singleunit

Options

•Glazingoptions*:1 ⁄8"(3mm)DSB;1 ⁄8"(3mm) or1⁄4"(6mm)plexiglass;1⁄8"(3mm)or1⁄4"(6mm) tempered;1⁄8"(3mm)or1⁄4"(6mm)clearLexan®;3 ⁄8" (10mm)and1 ⁄4"(6mm)multi-wallpolycarbonate; 1 ⁄4"(6mm)wireglass;1⁄2"(12mm)insulatedglass•Electricoperatororchainhoist•Bottomsensingedge•3"track•Bracketmounting(notavailableonfullvertical doortracks)•Higher-cyclespringsin25k,50k,75k,100kcycles•Exhaustports

*Contact your local Overhead Door Corporation Red Ribbon Distributor for special glazing requirements. Verify 1/4” (6 mm) glass applications with factory

The Color Palette for Sectional Aluminum Door Products 197powdercoatfinishesareavailablefromyourOverheadDoordistributor.

197 Standard Powder Coat Finishes

Panel Schedule Section Schedule

Door Width Numberof Panels Door Height Number

of Sections

to 8’11”(2718 mm)

2to 8’6”(2591 mm)

4

9’0” to 11’11”(2743 mm to 3632 mm)

38’7” to 10’1”(2616 mm to 3073 mm)

5

12’0” to 14’11”(3658 mm to 4547 mm)

410’2” to 12’1”(3099 mm to 3683 mm)

6

15’0” to 16’2”(4572 mm to 4928 mm)

512’2” to 14’1”(3708 mm to 4293 mm)

7

14’2” to 16’1”(4318 mm to 4902 mm)

8

SERIES 511

3


Installation and Service provided by Overhead Door Company of Hartford Series 511 Clear Anodized


Sectional Aluminum Doors

The 521 Series is a sectional aluminum door appropriate for environments where maxi-mum light infiltration and/or visual access is required. Designed to fit openings up to 26’11” (8204 mm) wide and 20’1” (6121 mm) high, the 521 Series features a wide, 2 11/16” (68 mm) center stile, a 2 3/8” (60 mm) or 3 3/4” (95 mm) top rail, and 3 3/4” (95 mm) or 4 1/2” (114 mm) bottom rail. Like the 511 Series, the 521 Series is available with a variety of glazing choices, finishes and special options.

Standard Features At a Glance

Sectionthickness 13/4"(45mm)Maximumstandardwidth 26'11"(8204mm)Maximumstandardheight 20'1"(6121mm)Material 6063-T6 aluminumStandardfinish 204R-1clear anodized(painted whiteatnocharge)Centerstilewidth 211/16"(68mm)Endstilewidth 35/16"(85mm)Toprailwidth 23/8"(60mm)or 33/4"(95mm)Topintermediaterailwidth 21/8"(54mm)Bottomintermediaterailwidth 119/32"(40mm)Bottomrailwidth 33/4"(95mm)or 41/2"(114mm)Weatherseals Bottom,flexible PVCStandardsprings 10,000cycleTrack 2"(51mm)Mounting AngleOperation ManualpullropeHingesandfixtures GalvanizedsteelLock Galvanized, interior-mounted singleunit

Options

•Glazingoptions*:1 ⁄8"(3mm)DSB;1 ⁄8"(3mm)or 1 ⁄4"(6mm)plexiglass;1 ⁄8"(3mm)or1 ⁄4"(6mm) tempered;1 ⁄8"(3mm)or1 ⁄4"(6mm)clearLexan®; 3 ⁄8"(10mm)and1 ⁄4"(6mm)multi-wallpolycarbonate;1 ⁄4"(6mm)wireglass;1/2"(12mm)insulatedglass•Electricoperatororchainhoist•Bottomsensingedge•3"track•Bracketmounting(notavailableonfullvertical doortracks)•Higher-cyclespringsin25k,50k,75k,100kcycles•Exhaustports•Four-sectionpassdoor

*Contact your local Overhead Door Corporation Red Ribbon Distributor for special glazing requirements. Verify 1/4” (6 mm) glass applications with factory

The Color Palette for Sectional Aluminum Door Products 197powdercoatfinishesareavailablefromyourOverheadDoordistributor.

197 Standard Powder Coat Finishes

Panel Schedule Section Schedule

Door Width Number of Panels

Door Height Number of Sections

to 8’2” (to 2489 mm)

2 to 8’6” (to 2591 mm)

4

8’3” to 12’2” (2515 mm to 3708 mm)

3 8’7” to 10’1” (2616 mm to 3073 mm)

5

12’3” to 16’2” (3734 mm to 4953 mm)

4 10’2” to 12’1” (3099 mm to 3683 mm)

6

16’3” to 19’2” (4978 mm to 5842 mm)

5 12’2 to 14’1” (3708 mm to 4293 mm)

7

19’3” to 20’11” (5867 mm to 6375 mm)

6* 14’2” to 16’1” (4318 mm to 4902 mm)

8

21’0” to 23’11” (6401 mm to 7290 mm)

8* 16’2” to 18’1” (4928 mm to 5512 mm)

9

24’0” to 26’11” (7315 mm to 8204 mm)

10* 18’2” to 20’1” (5537 mm to 6121 mm)

10

*Special construction. Consult your local Overhead Door Red Ribbon Distributor for additional information.

SERIES 521

5


Installation and Service: Overhead Door Company of Twin Falls Series 521 Dark Bronze Anodized

SERIES 521


2” (51 mm) Track [15” (381 mm) Radius]

Door Height Centerline of Shaft Minimum Headroom

Thru 12’0” (3658 mm) O.H. + L.C. + 5 5/8” (143 mm) L.C.+ 8 3/4” (222 mm)Thru 16’0” (4877 mm) O.H. + L.C. + 5 5/8” (143 mm) L.C.+ 11 1/4” (286 mm)3” (76 mm) Track [15” (381 mm) Radius]

Thru 22’0” (6706 mm) O.H. + L.C. + 6 5/8” (168 mm) L.C.+ 11 1/2” (292 mm)Thru 32’0” (9754 mm) O.H. + L.C. + 6 5/8” (168 mm) L.C.+ 12 1/4” (311 mm)

Lift Clearance TrackStandard

Track Detail

Any of the following track configurations can be selected for 511 and 521 Aluminum door models.O.H.=Opening Height L.C.=Lift Clearance D.H.=Door Height

Standard Lift Track

Low Headroom TrackSprings to Front

Low Headroom TrackSprings to Rear

Full Vertical Track



Thru 12’0” (3658 mm) O.H. + 11 5/8” (295 mm) 14 1/4” (362 mm)Thru 16’0” (4877 mm) O.H. + 12 5/8” (321 mm) 20 1/2” (521 mm)3” (76 mm) Track [15” (381 mm) Radius]

Thru 18’0” (5486 mm) O.H. + 14 5/8” (372 mm) 18” (457 mm)Thru 32’0” (9754 mm) O.H. + 16 7/8” (429 mm) 21 1/2” (546 mm)



Thru 12’0” (3658 mm) D.H. + 8” (203 mm) 11 3/4” (299 mm)Thru 16’0” (4877 mm) D.H. + 8” (203 mm) 12 1/2” (318 mm)3” (76 mm) Track [15” (381 mm) Radius]

Thru 12’0” (3658 mm) D.H. + 9” (229 mm) 13” (330 mm)Thru 32’0” (5486 mm) D.H. + 9” (229 mm) 13 3/4” (349 mm)



Thru 11’0” (3353 mm) O.H. + O.H. + 3/8” (10 mm) O.H. + 10 1/4” (260 mm)Thru 16’0” (4877 mm) O.H. + O.H. + 3/8” (10 mm) O.H. + 10 1/4” (260 mm)3” (76 mm) Track [15” (381 mm) Radius]

Thru 18’0” (5486 mm) O.H. + O.H. + 3/8” (10 mm) O.H. + 10 1/4” (260 mm)

2” (51 mm) Track [15” (381 mm) Radius]Door Height Centerline of Shaft Minimum Headroom

Thru 12’0” (3658 mm) O.H. + 2” (51 mm) 7 1/2” (191 mm)Thru 16’0” (4866 mm) O.H. 2” (51 mm) 8” (203 mm)3” (76 mm) Track [15” (381 mm) Radius]

Thru 18’0” (5486 mm) O.H. 6 3/4” (171 mm) 9 3/4” (248 mm)

7


Framing and pad details for common installation of Aluminum doors in steel, wood, concrete and masonry jambs are provided here. If you require additional information or have special project requirements, refer to the Overhead Door Architectural Design Manual, (www.OverheadDoor.com/ADM/base.html) or consult with the Overhead Door Applications Engineering Group or your local Overhead Door distributor.

2" (51 mm) Track

3” (76 mm)* Track

Steel Jambs

2” (51 mm) Track

3” (76 mm)* Track

Wood Jambs

2” (51 mm) Track

3” (76 mm)* Track

Concrete/Masonry Jambs

Minimum Required Sideroom

Track Type 2” Track (51 mm) 3” Track (76 mm)*

Standard Lift 4 1/2” (114 mm) 6 1/2” (165 mm)

Low Headroom 9” (229 mm) 10” (254 mm)

Lift Clearance 4 1/2” (114 mm) 6 1/2” (165 mm)

Full Vertical 4 1/2” (114 mm) 6 1/2” (165 mm)













* 3" (76 mm) track not available with 598 Series.

Framing & Pad Detail


Electric Operators

Operator Control Options

•Push-button,keyorcombinationstations;surface-orflush-mountedforinteriorand/orexteriorlocations•Vehicledetectors,keycardreader,photocellanddoortimercontrols•Treadleorpullswitchstations•Telephoneentryandcodedkeyboardstations•Universalprogrammabledoortimer•Radiocontrolsystems(24VACor120VAC)•Explosionanddustignition-proofsystems

Electric Operator Selection Guide

Hor

sep

ower

/N

ewto

ns

Max

. hei

ght o

f doo

r

Max

. wei

ght o

f doo

r

Supe

r Bel

t™/P

olyb

elt

Wor

m g

ear

Adj

usta

ble

clut

ch

Tota

lly e

nclo

sed

Con

tinou

s du

ty

Expl

osio

n pr

oof

Mou

ntin

g ty

pe

RHX® 1/2 HP, 3/4 HP1 HP, 3 HP

24’(7315 mm)

3696 lbs(1676 kg) • • • • T, S, C

RSX® 1/2 HP, 3/4 HP1 HP

24’(7315 mm)

1620(735 kg) • • • • T, S, C

RMX® 1/2 HP 14’(4267 mm)

620(281 kg) • T, S

RDX® 650 N,1300 N

33’(10,057 mm)

900(509 kg) • S

Mounting Options: T=Trolley S=Side mount C= Center mount

Safety Recommendations

OverheadDoorCorporationstronglyrecommendstheuseofaprimarysafetydeviceasdefinedbyUL3252010.Aprimarysafetydevicecanbeapprovedmonitoredphoto-eyesoranapprovedmonitoredsensingedge.Ifaprimarysafetydeviceisnotinstalled,aconstantcontactcontrolswitchmustbeusedtoclosethedoor.ContactOverheadDoorformoreinformation.

Overhead Door Corporation offers thebroadest line of electric operators to suit new construction and retrofit applications, as well as unusual or special requirements.

Manufactured by Overhead Door Corporation to meet the exacting performance requirements of Overhead Door’s upward-acting doors, our ribbon branded operators afford precise control of door action for years of trouble-free operation.

In order to improve safety and enhance doorand motor life, industry quality assurance guidelines recommend the choice of a single manufacturer for both door and operator applications. Overhead Door Corporation is one of the only national manufacturers to offer a full line of commercial and industrial doors and operators specifically designed for integral applications.

Operator Models

Model RMX®

ModelRMX®isournewest,mostadvancedmedium-dutyoperator.Itisdesignedforquickerinstallationandhassle-freeoperationandoperatesdoorsupto14'(4267mm)inheightand620pounds(282kg).Itisavailableasatrolley-typeorside-mountedunit.

Model RSX®

ModelRSX®isastandarddutycommercialoperatordesignedtooperatedoorsupto24'(7315mm)inheightand1620pounds(735kg).ItoffersuniquefeatureslikeLimitLock®,SuperBelt™&16digitmenusetup.

Model RHX®

ModelRHX®isaheavydutycommercialoperatordesignedtooperatedoorsupto24'(7315mm)inheightand3696pounds(1676kg).Availableaseitheratrolley,sidemountorcentermount.

S

Model RDX®

TheRDX®isdesignedforlimitedspaceapplicationsandisavailableinbothmediumandstandarddutymotoroptionsdesignedtooperatedoorsupto40'(12,192mm)inheightand900pounds(409kg).ItoffersuniquefeatureslikealightweightDCmotor,automaticlimitsettingandsensitiveobstructiondetection.

9

Minimum Headroom Requirements

RMX®

Track Requirements +4 1/2” (114 mm)

RSX®

Track Requirements +5” (127 mm)

RHX®



5 3/4"TYPICAL MIN.SIDE ROOM

5 1/2"

4 3/16"

7 5/16"

12 13/16"

3 5/8"

Mounting Details

Trolley-type(Drawbar)operatorsfeatureapowerunitmountedbetween,aboveandtotherearofthehorizontaltracks.Thedrawbardriveprovidespositivecontrolofthedooratalltimes,makingthisoperatorthepreferredchoicewheneverpossible.Maximumdoorwidthis20'perdrawbar.Doorwidthover20'requiresdualdrawbarinstallation.AvailableonModelsRMX®,RSX®andRHX®.

Trolley-type (Drawbar)RMX®, RSX®,RHX®

Side-mounted(Jackshaft)RMX®,RSX®,andRHX®operatorsfeatureapowerunitmountedontheinsidefrontwallandconnectedtothecrossheadshaft,withanadjustablecouplingordrivechainandsprockets.Side-mounted(jackshaft)RDX®operatorsfeatureapowerunitmounteddirectlytothecrossheadershaft,andsecuredtothedoortrack.

Side Mount Type (Jackshaft)RMX®, RSX®, RDX®, RHX®

Center-mounted(Jackshaft)operatorsfea-tureapowerunitonthefrontwallabovethedooropening.Noadditionalbackroomisrequired.AvailableonmodelsRSX®andRHX®

Center Mount Type/Jackshaft RSX®, RHX®

Depth Requirements - “A” Dimension (Backroom)

RMX®

Door Height +4’ 0” (1219 mm)

RSX®


RHX®


“A” Dimension - Minimum (Sideroom)

2” Track (51 mm) 3” Track (76 mm)*

RMX®

18 1/2” (470 mm) 19 1/2” (495 mm)

RSX®

21” (533 mm) 22” (559 mm)

RHX®

21” (533 mm) 22” (559 mm)

RDX®

5 3/4” (146 mm) 5 3/4” (146 mm)

5 3/4"TYPICAL MIN.SIDE ROOM

5 1/2"

4 3/16"

7 5/16"

12 13/16"

3 5/8"

Mounting Details

Trolley-type(Drawbar)operatorsfeatureapowerunitmountedbetween,aboveandtotherearofthehorizontaltracks.Thedrawbardriveprovidespositivecontrolofthedooratalltimes,makingthisoperatorthepreferredchoicewheneverpossible.Maximumdoorwidthis20'perdrawbar.Doorwidthover20'requiresdualdrawbarinstallation.AvailableonModelsRMX®,RSX®andRHX®.

Trolley-type (Drawbar)RMX®, RSX®,RHX®

Side-mounted(Jackshaft)RMX®,RSX®,andRHX®operatorsfeatureapowerunitmountedontheinsidefrontwallandconnectedtothecrossheadshaft,withanadjustablecouplingordrivechainandsprockets.Side-mounted(jackshaft)RDX®operatorsfeatureapowerunitmounteddirectlytothecrossheadershaft,andsecuredtothedoortrack.

Side Mount Type (Jackshaft)RMX®, RSX®, RDX®, RHX®

Center-mounted(Jackshaft)operatorsfea-tureapowerunitonthefrontwallabovethedooropening.Noadditionalbackroomisrequired.AvailableonmodelsRSX®andRHX®

Center Mount Type/Jackshaft RSX®, RHX®

Minimum Headroom Requirements

RSX®


RHX®

Track Requirements +23 5/8” (600 mm)


The Original, lnnovative Choice for Unequalled Quality and Service

Overhead Door Corporation pioneered the upward-acting door industry, inventing the first upward-acting door in 1921 and the first electric door operator in 1926. Today, we continue to be the industry leader through the strength of our product innovation, superior craftsmanship and outstanding customer support, underscoring a legacy of quality, expertise and integrity. That’s why design and construction professionals specify Overhead Door Corporation products more often than any other brand.

The Overhead Door Red Ribbon is a mark of quality that also reflects the pride we take in the people who support our products. Our family of over 400 Ribbon Distributors across the country not only share our name and logo, but also our commitment to excellence. Your Ribbon Distributor will work with you in a consultative role to ensure that product selections achieve your design and application requirements — in addition to offering expert installation, professional field service and ongoing maintenance. From project design and manufacturing to installation and service, the Overhead Door Red Ribbon is your guarantee of genuine quality and turnkey service excellence.

Together with our Red Ribbon Distributors, we offer comprehensive technical information and resource materials to support your project, including:• Architectural Design Manual – a comprehensive guide to selecting, specifying and detailing all commercial and industrial

Overhead Door products can be found at www.OverheadDoor.com/ADM/base.html• Operation & Maintenance Manual – detailed product information, customized for your project, to ensure reliable, long-life door

system operation• Custom application and technical assistance through ordering plants’ customer service and technical services respectively• Visit our Architect’s Corner at www.OverheadDoor.com

Today, Overhead Door Corporation – along with our Horton Automatics division, for automated pedestrian entrances – is recognized as the leading, single-source manufacturer of integrated door and operator systems for commercial, industrial and residential applications. With multiple manufacturing locations throughout the United States, a state-of-the-art TREQ (Testing, Reliability, Engineering, and Quality) Center for design and engineering, and a national network of authorized Red Ribbon Distributors, our capabilities are leading-edge and our field service and technical support second to none. Built best and backed best, Overhead Door is the industry’s leading choice for quality that shows and lasts.

To talk with the Overhead Door distributor nearest you, call 1-800-929-DOOR.

Overhead Door Corporation

2501 S. State Hwy. 121 Bus., Suite 200Lewisville, Texas 750671-800-929-DOORwww.OverheadDoor.com

The Overhead Door Corporation family of quality commercial and industrial products includes:

A part of Sanwa Holdings Corporation

INDUSTRY LEADING COMMERCIAL & INDUSTRIAL SOLUTIONS

©2012 Overhead Door Corporation. Overhead Door, Thermacore, RHX, RSX, RapidSlat and the Ribbon logo are registered trademarks of Overhead Door Corporation. All other trademarks are property of their rightful owners. Consistent with our policy of continuing product improvement, we reserve the right to change product specifications without notice or obligation. C900-069 2M 7/12 JAR

Advanced Rolling Steel Door RapidSlat®

Thermacore® Sectional Doors Rolling & Side FoldingSecurity Grilles & Closures

Rolling Service Doors Commercial Operators

A new dimension in fence design. - thempc.org 14... · Fence posts are of sufficient length to allow for setting into concrete footers. ... “TWINBAR FORTRESS Standard ... • Lightweight

Documents