A KYOCERA GROUP COMPANY ELCO 2mm Hard Metric Connectors For CompactPCI ® Applications
A KYOCERA GROUP COMPANY
ELCO2mm Hard Metric ConnectorsFor CompactPCI® Applications
ELCOELCO
THE ELCO ADVANTAGE• Modular connector system with 2.0mm grid for
CompactPCI backplane and daughter cards.• High density, high speed impedance matched connector
system.• 5 signal rows plus two shield rows for optimum per-
formance.• 12 standard contacts provide 3 level sequential mating
for either front or rear “Hot Swapping” applications.• Elco’s original VariPinTM compliant press-fit technology
provides reliable solderless terminations.• Full custom pin layout services.
APPROVAL SPECIFICATIONSElco Multi-Line Module connector system meets the require-ments of IEC 1076-4-101.
PICMG®
The Multi-Line Module connector system meets the require-ments of the CompactPCI specification as defined by thePCI Industrial Computer Manufacturers Group.
TELCORDIA (FORMERLY BELLCORE)Elco Multi-Line Module Connectors are designed to meet therequirements of Telcordia Technologies (formerly BellCore),GR-1217-Core.
ISO9001Elco Multi-Line Module Connectors are manufactured in afully approved ISO9001 facility.
UL E53664Approved by Underwriters Laboratories. File No. E53664
Introduction
Elco Multi-Line Module Connectors are 2.0mm “Hard-Metric” connectors and accessories which are in compliancewith IEC 1076-4-101. This spec has been selected as theCompactPCI bus architecture by the PCI IndustrialComputer Manufacturers Group (PICMG). Elco Multi-Line
Module Connectors have been specifically designed as P1-5/J1-5 connectors for CompactPCI bus applications andP0/J0 in the VME64 Extension format. Elco also offers fullcustom connector services to meet the specific needs ofgiven markets and systems.
Elco Connectors is an executive member of the PCI Industrial Computer ManufacturersGroup, (PICMG), a consortium of Industrial Computer Product vendors with the mission ofdesigning specifications for PCI-based systems and boards to be used in industrial andtelecommunications applications. For more information on PICMG visit their website at www.picmg.org
Executive Member
1ELCOELCO
Contents
Multi-Line Module Series Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
Sequential Mating and Contact Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
J1/J4 Type A Right Angle Female for Daughter Cards Series 8071 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
J2/J5 Type B Right Angle Female for Daughter Cards Series 8071 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
J3 Type B Right Angle Female for Daughter Cards Series 8071 (P0 of VME64 Extension) . . . . . . . . . . . . . . . . . 12
J4 Type A Right Angle Female with Split Shield(Computer Telephony) Series 8071. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Type B Right Angle Female for Daughter Cards Series 8071 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Type C Right Angle Female for Daughter Cards Series 8071 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
P1/P4 Type A Vertical Male Feed-To for Backplanes Series 8071 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
P2/P5 Type B Vertical Male Feed-To for Backplanes Series 8071 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
P1 Type A Vertical Male Feed-To for Backplanes(Hot Swap) Series 8071 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
P3 Type B Vertical Male Feed-To for Backplanes Series 8071 (J0 of VME64 Extension). . . . . . . . . . . . . . . . . . . 19
P4 Type A Vertical Male Feed-To for Backplanes(Computer Telephony) Series 8071. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Type B Vertical Male Feed-To for Backplanes Series 8071 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Type C Vertical Male Feed-To for Backplanes Series 8071 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Type B Vertical Male Feed-Thru Series 8071 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
P2/P5 Type B Vertical Male Feed-Thru for Backplanes Series 8071 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-25
P3 Type B Vertical Male Feed-Thru for Backplanes Series 8071 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-27
P4 Type A Vertical Male Feed-Thru for Backplanes Series 8071 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
P5 Type B Vertical Male Feed-Thru for Backplanes(Computer Telephony) Series 8071. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Style M DIN Power Connector Series 8483/8485. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Type L Vertical Male Plug Feed-To for Backplanes Series 8074 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Type M Vertical Male Feed-To for Backplanes Series 8075. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Application and Installation Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Coding Keys: Type A Male (Backplane)Type A Receptacle (Daughter Card) Series 8071 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Type A Right Angle Male for Daughter Cards Series 8072 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Type B Right Angle Male for Daughter Cards Series 8072 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
RP4 Shroud, Type A & C for Backplanes Series 8071 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
RP2, 3, 5 Shroud, Type B for Backplanes Series 8071. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Power Pack Connectors Series 2525 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
5 Position Module Input/Output Cable Series 8073 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
CompactPCI Custom Design Worksheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42-43
2 ELCOELCO
TYPE B RIGHT ANGLE FEMALE (SERIES 8071)
• With or Without Shield• 125 Signal Contacts• Length 49.9mm• Daughter Card Applications• See page 14
J1/J4 TYPE A RIGHT ANGLE FEMALE(SERIES 8071)
• With or Without Shield• 110 Signal Contacts• Length 49.9mm• Pre-alignment and Polarizing Guide• Daughter Card Applications• See page 10
Elco Multi-Line Module Series Overview
J2/J5 TYPE B RIGHT ANGLE FEMALE(SERIES 8071)
• With or Without Shield• 110 Signal Contacts• Length 43.9mm• Daughter Card Applications• See page 11
J3 TYPE B RIGHT ANGLE FEMALE(P0 OF VME64 EXTENSION)(SERIES 8071)
• With or Without Shield• 95 Signal Contacts• Length 37.9mm• Daughter Card Applications• See page 12
J4 TYPE A RIGHT ANGLE FEMALEWITH SPLIT SHIELD (COMPUTER TELEPHONY) (SERIES 8071)
• 90 Signal Contacts• Length 49.9mm• Pre-Alignment and Polarizing Guide• Daughter Card Applications• See page 13
3ELCOELCO
Elco Multi-Line Module Series Overview
P1/P4 TYPE A VERTICAL MALE FEED-TO(SERIES 8071)
• 110 Signal Contacts• 44 Ground Contacts• Length 49.9mm• Pre-alignment and Polarizing Guide• Backplane Applications• See page 16
P2/P5 TYPE B VERTICAL MALE FEED-TO(SERIES 8071)
• 110 Signal Contacts• 44 Ground Contacts• Length 43.9mm• Backplane Applications• See page 17
P1 TYPE A VERTICAL MALE FEED-TO(HOT SWAP) (SERIES 8071)
• 110 Signal Contacts• 44 Ground Contacts• Length 49.9mm• Pre-Alignment and Polarizing Guide• Backplane Applications• See page 18
P3 TYPE B VERTICAL MALE FEED-TO(J0 OF VME64 EXTENSION SPEC)(SERIES 8071)
• 95 Signal Contacts• 38 Ground Contacts• Length 37.9mm• Backplane Applications• See page 19
TYPE C RIGHT ANGLE FEMALE(SERIES 8071)
• With or Without Shield• 55 Signal Contacts• Length 24.95mm• Daughter Card Applications• Pre-alignment Guide Pins• See page 15
4 ELCOELCO
TYPE B VERTICAL MALE FEED-THRU(SERIES 8071)
• 125 Signal Contacts• 50 Ground Contacts• Length 49.9mm• Midplane Applications• See page 23
Elco Multi-Line Module Series Overview
P4 TYPE A VERTICAL MALE FEED-TO(COMPUTER TELEPHONY) (SERIES 8071)
• 84 Signal Contacts• 16 Ground Contacts• Length 49.9mm• Pre-alignment and Polarizing Guide• Backplane Applications• See page 20
TYPE B VERTICAL MALE FEED-TO(SERIES 8071)
• 125 Signal Contacts• 50 Ground Contacts• Length 49.9mm• Backplane Applications• See page 21
TYPE C VERTICAL MALE FEED-TO(SERIES 8071)
• 55 Signal Contacts• 22 Ground Contacts• Length 24.95mm• Backplane Applications• See page 22
P2/P5 TYPE B VERTICAL MALE FEED-THRU(SERIES 8071)
• 110 Signal Contacts• 44 Ground Contacts• Length 43.9mm• Midplane Applications• See page 24
5ELCOELCO
Elco Multi-Line Module Series Overview
P4 TYPE A VERTICAL MALE FEED-THRU(SERIES 8071)
• 110 Signal Contacts• 44 Ground Contacts• Length 49.9mm• Pre-alignment and Polarizing Guide• Midplane Applications• See page 28
P5 TYPE B VERTICAL MALE FEED-THRU(COMPUTER TELEPHONY) (SERIES 8071)
• 110 Signal Contacts• 22 Ground Contacts• Length 43.9mm• Midplane Applications• See page 29
TYPE M EUROCARD POWER CONNECTOR(SERIES 8483/8485)
• 7 Power Contacts• 24 Signal Contacts• Length 95mm• Backplane Applications• See page 30
TYPE L VERTICAL MALE FEED-TO(SERIES 8074)
• 6 Power Contact Cavities• Pre-Alignment and Polarizing Guide• Length 49.9mm• See page 31
P3 TYPE B VERTICAL MALE FEED-THRU(SERIES 8071)
• 95 Signal Contacts• 38 Ground Contacts• Length 37.9mm• Midplane Applications• See page 26
6 ELCOELCO
Elco Multi-Line Module Series Overview
TYPE M VERTICAL MALE FEED-TO (SERIES 8075)
• 3 Power Contact Cavities• 55 Signal Contacts• Pre-Alignment and Polarizing Guide• Length 49.9mm• See page 32
CODING KEYS (SERIES 8071)• 8 Male and Female Coding Keys• For use in Type A Male and Female Connectors• 4 Different Colors for Easy Visual Identification• Easy Snap Installation• See page 34
TYPE B RIGHT ANGLE MALE FOR DAUGHTER CARD (SERIES 8072)
• 95, 110, 125 Signal Contacts• Lengths 37.9 to 49.9mm• Daughter Card Applications• See page 36
TYPE A RIGHT ANGLE MALE FOR DAUGHTER CARD (SERIES 8072)
• 110 Signal Contacts• Length 49.9mm• Pre-Alignment and Polarizing Guide• Daughter Card Applications• See page 35
RP4 SHROUD, TYPE A & C FORBACKPLANES (SERIES 8071)
• 77 & 154 Cavities• Three Different Base Thicknesses• Backplane Applications• See page 37
7ELCOELCO
Elco Multi-Line Module Series Overview
RP2, 3, 5 SHROUD, TYPE B (SERIES 8071)• 133, 154, 175 Cavities• Three Different Base Thicknesses• Backplane Applications• See page 38
POWER PACK CONNECTORS (SERIES 2525)
• High Current Distribution in Backplane Applications• Three Different Base Thicknesses• VARIPIN™ Press-Fit Design• Several Different Connection Versions Available• See page 39
5 POSITION MODULAR INPUT/OUTPUT CABLE(SERIES 8073)
• 5 Signal +2 Ground Positions• 2.0mm Pitch • Modular Design• Snap Together Modules to Increase Number of Circuits• See page 40
8 ELCOELCO
Sequential Mating andContact Length
The Elco Multi-Line Module connector system can provide12 standard contacts in any configuration to provide 3 levelsequential mating and either front or rear mating. 3 levellength is in 1.5mm increments to ensure sequential mating(as first mate, last break) and (last mate, first break).
MIDPLANE AND HORIZONTAL MATINGAPPLICATIONS
• 3 pin lengths in the front or rear allow for sequential mating in midplane applications.
• Rear shrouds are used in conjunction with the long pinlengths K-W (see chart above).
• Three shroud thicknesses allow for a full range of backplane thicknesses from 1.6mm to 6.0mm.
9ELCOELCO
Elco Multi-Line Module Connectors utilize the originalElco VARIPIN™ press-fit technology for reliablesolderless applications.
BOARD SPECIFICATIONSP.C. Board Thickness Drilled Hole Copper Plate Tin Plate Plated Hole
1.4-4.2mm 0.7±0.025 25-50um 4-10um 0.6±0.05
Elco Multi-Line Module ConnectorsFor CompactPCITECHNICAL SPECIFICATIONS
Contact Spacing 2.0mm gridCurrent Rating 1.0A/contactVoltage Rating 250V maximumDielectric Withstanding Voltage 750VAC rms/minute Insulation Resistance 104M Ω minimumContact Resistance 20m Ω maximumInsertion Force n x 0.75 N maximumSeparation Force n x 0.15 N minimum
Operating Temperature -55° to +125°CStorage Temperature -10° to +60°C
MATERIALContact Plug Phosphor Bronze
Receptacle Phosphor BronzeInsulator Plug PBT 30% Glass Filled, UL 94V-0 Rated
Receptacle PBT 30% Glass Filled, UL 94V-0 RatedShroud PBT 30% Glass Filled, UL 94V-0 RatedCode Key Glass Filled Polyester, UL 94V-0 RatedGround Return Shields Phosphor Bronze
FINISH
COMPLIANT PINS
Finish Code Class Mating Cycle Mating Area Other Area Press-fit Area833/515 1 500 Pd/Ni 0.65µm min.
Gold 0.1µm min. Gold 0.05µm Tin/Lead 1.2-2.0um
Nickel under plating 1.2-2.0µm for all Finish Codes
10 ELCOELCO
J1/J4 Type A Right AngleFemale for Daughter CardsSeries 8071
• 110 signal contacts in 5 rows of 25 positions• Center cavity with pre-alignment guides and polarization option
(uses 3 positions)• See page 34 for keying options• Designed for gas tight press-fit installation• Supplied with or without upper ground return shield• Available with bottom pegs for secure P.C. mounting• This connector can be used by itself or in conjunction with Style B
or C connectors• Used in positions J1/J4 of CompactPCI specification (Daughter
Card)
27 8071 110 001 833 = Type A Right Angle Female without top shield, with pegs27 8071 110 002 833 = Type A Right Angle Female without top shield, without pegs27 8071 110 011 833 = Type A Right Angle Female with top shield, with pegs27 8071 110 012 833 = Type A Right Angle Female with top shield, without pegsContact Elco for availability of alternate platings
ab
cd
e1111525
TY
P.
2.0
2X4=
8.0
11.4
7.4
3.53.2
3.0
MAX.0.95
TYP.2.0
2X10=20.0
-0.2 049.9
2X10=20.0
2x24=48.0
a bc d fe12.8
12.2
5
6.0
9Z21XX
(20.9)
abcd
fe
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
2.0±0.1 TYP.
2x10=20.0±0.1
2x14=28.0±0.1
2x24=48.0±0.1
2x12=24.0±0.1
2.0±
0.1
TYP.
HOLE2- 2
.0±0
.1
MA
X.
1.5
HOLES135- 0.6±0.05
2x5=
10.0
±0.1
f
f
11ELCOELCO
J2/J5 Type B Right AngleFemale for Daughter CardsSeries 8071
• 110 signal contacts in 5 rows of 22 positions• Designed for gas tight press-fit installation• Supplied with or without upper ground return shield• Daughter card applications• Fills positions J2 and J5 of the CompactPCI specification• This connector should be used in conjunction with a Type A style
to ensure proper mating alignment
27 8071 110 000 833 = Type B 110 Pin Right Angle Female without upper shield27 8071 110 010 833 = Type B 110 Pin Right Angle Female with upper shieldContact Elco for availability of alternate platings
ab
cd
e122
TY
P.
2.0
2X4=
8.0
11.4
MAX.0.95
TYP.2.0
-0.243.9
42.0
9Z21XX
(20.
9)
TYP.2.0
1.8
3.0 7.
4
2X5=10.01.8
3.2a
bcd
fe
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
2.0±0.1 TYP.
2.0±
0.1
TYP.
MA
X.
1.5
2X (N/5-1) = A±0.1
HOLES132- 0.6±0.05
2 x
5=10
.0±0
.1
f
12 ELCOELCO
J3 Type B Right Angle Femalefor Daughter CardsSeries 8071
• 95 signal contacts in 5 rows of 19 positions• Designed for gas tight press-fit installation• Supplied with or without a upper ground return shield• Daughter card applications• This connector should be used in conjunction with a Type A style
to ensure proper mating alignment• This connector fills position J3 of the CompactPCI specification• This connector also fills position P0 of the VME64 extension
specification
27 8071 095 000 833 = Type B 95 Pin Right Angle Female without upper shield27 8071 095 010 833 = Type B 95 Pin Right Angle Female with upper shieldContact Elco for availability of alternate platings
ab
cd
e119
TY
P.
2.0
2X4=
8.0
11.4
MAX.0.95
TYP.2.0
-0.237.9
36.0
9Z21XX
(20.
9)
abcd
fe
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
2.0±0.1 TYP.
2.0±
0.1
TYP.
MA
X.
1.5
2X (N/5-1) = A±0.1
HOLES114- 0.6±0.05
2 x
5=10
.0±0
.1
f
TYP.2.0
1.8
3.0 7.
4
2X5=10.01.8
3.2
13ELCOELCO
• 90 signal contacts in 5 rows of 25 positions• Center cavity with pre-alignment guides and polarization option
(uses 3 positions)• See page 34 for keying options• Designed for gas tight press-fit installation• Supplied with upper ground return shield• Available with bottom mounted pegs for secure P.C. mounting• This connector can be used by itself or in conjunction with Style B
or C connectors• Daughter card applications• Used in position J4 of the CompactPCI Computer Telephony
specification
27 8071 090 501 833 = Type A Right Angle Female with upper shield, with peg27 8071 090 502 833 = Type A Right Angle Female with upper shield, without pegContact Elco for availability of alternate platings
J4 Type A Right Angle Femalewith Split Shield (Computer Telephony)Series 8071
ab
cd
e1111525
TY
P.
2.0
2X4=
8.0
11.4
MAX.0.95
TYP.2.0
2X10=20.0
-0.2 049.9
2X10=20.0
2X24=48
8N21XX
(20.
9)
TYP.2.0
1.8
3.0
3.5
3.2
2X5=10.0
7.6
12.2
5
abcd
fe
2.0±0.1 TYP.
2X10-20.0±0.1
2X14-28.0±0.1
2X24=48.0±0.1
2X12-24.0±0.1
2.0±
0.1
TYP.
HOLE2- 2
.0±0
.1
MA
X.
1.5
HOLES-0.05 099- 0.6
2X5=
10.0
±0.1
2X7=14.0±0.1
f
f
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
14 ELCOELCO14 ELCOELCO
Type B Right Angle Femalefor Daughter Cards Series 8071
• 125 signal contacts in 5 rows of 25 positions• Designed for gas tight press-fit installation• Supplied with or without upper ground return shield• Daughter card applications• This connector should be used in conjunction with a Type A style
to ensure proper mating alignment
27 8071 125 000 833 = Type B 125 Pin Right Angle Receptacle without upper shield27 8071 125 010 833 = Type B 125 Pin Right Angle Receptacle with upper shieldContact Elco for availability of alternate platings
ab
cd
e125
TY
P.
2.0
2X4=
8.0
11.4
MAX.0.95
TYP.2.0
-0.249.9
48.0
9Z21XX
(20.
9)
TYP.2.0
1.8
3.0 7.
4
2X5=10.01.8
3.2a
bcd
fe
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
2.0±0.1 TYP.
2.0±
0.1
TYP.
MA
X.
1.5
48.0 ±0.1
HOLES150- 0.6±0.05
2 x
5=10
.0±0
.1
f
15ELCOELCO
Type C Right Angle Femalefor Daughter Cards Series 8071
• 55 signal contacts in 5 rows of 11 positions• Designed for gas tight press-fit installation• Supplied with or without upper ground return shield• Available with bottom pegs for secure P.C. board mounting• Daughter card applications• This connector is designed for end positions only
27 8071 055 001 833 = Type C 55 Pin Right Angle Female without upper shield, with peg27 8071 055 002 833 = Type C 55 Pin Right Angle Female without upper shield, without peg27 8071 055 011 833 = Type C 55 Pin Right Angle Female with upper shield, with peg27 8071 055 012 833 = Type C 55 Pin Right Angle Female with upper shield, without pegContact Elco for availability of alternate platings
ab
cd
e111
55
PE
LC
O 8
07
1
TY
P.
2.0
2X4=
8.0
11.4
MAX.0.95
TYP.2.0
2X10=20.0
-0.2 024.95
9Z21XX(2
0.9)
abcd
fe
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
2.0±0.1 TYP.
2X10-20.0±0.1
2.0±
0.1
TYP.
HOLE2- 2
.0±0.1
HOLES66- 0.6±0.05
3.0±0.1MA
X.
1.5
2X5=
10.0
±0.1
TYP.2.0
3.0
3.5
3.2
7.4
1.8 2X5=10.0
011
TYP.2.0
3.0
3.2
7.4
1.8 2X5=10.0
012
f
f
16 ELCOELCO
• 110 signal contacts and 44 ground shield contacts in 5+2 rows of 25 positions
• Center cavity with polarization option (uses 3 positions)• See page 34 for keying options• Designed for gas tight press-fit installations• Twelve different contact styles are available for customizing
connector to exact specifications• Used in positions P1 and P4 of the CompactPCI specification• For custom contact configurations complete the form on page 42
17 8071 154 001 833 = P1 110 signal contacts and 44 ground contacts, Short Tail, Std cPCIContact Elco for availability of alternate platings
9Z21XX
25 1
f
e
dcba
z
1 25
16
10
15 11
-0.2 049.9
MAX.0.95
TY
P.
2.0
2X6=
12.0
TYP.2.0
2X10=20.02X10=20.0
2X24=48.0abcdef
z
25 1
2
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 23333 3333 333 33 3 3 33 3 333
3
32
222
32222
32222
32222
32222
32222
32222
32222
32222
32222
32232
32122
32222
32222
32222
32222
32222
32222
32222
32222
32222
32222
1115
CONTACT LAYOUT(CONNECTOR MATING SIDE SHOWN)
P.C
.B.
AR
EA
CO
NTA
CTAR
EA
CO
NTA
CT
AR
EA
CO
NTA
CT
0+0.
211
.3 0+0.
28.
3(3
.5)
(3.5
)
31
(3.5
)
2
0+0.
29.
8
13.4
5
15.4
3.0
4.5
za
f
edcb
1 25 1115
2.0±.1 TYP.
2.0±
0.1
TYP.
2x6-
12.0
±0.1
154- 0.6±0.5
2.0
±0.1
2x24=48.0±0.1
2x14=28.0±0.1
2x12=24.0±0.1
2X10=20.0±0.1
f
f
CONTACT DETAIL
P1/P4 Type A Vertical Male Feed-Tofor BackplanesSeries 8071
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
17ELCOELCO
9Z21XX
XX 11
122fed
cb
az
43.9
0.95 Max.
2.0 Typ.
42.0
2.0
Typ
.
2X6=
12.0
(COMPONENT SIDE SHOWN)RECOMMENDED P.C. BOARD LAYOUT
CONTACT LAYOUT(CONNECTOR SIDE SHOWN)
aZ
e
f
dcb
122
2.0 ±0.1 TYP.
42.0 ±0.1
154-ø0.6 ±0.05
2 x
6 =
12.0
±0.
1
2.0
±0.1
TYP
P.C
.B.
1 2 3
AR
EA
CO
NTA
CT
-0+0.
28.
3
abcdef
z
22 1
22222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
3333333333333333333333
3333333333333333333333
abcdef
z
22 1
1
11111111111111111111113333333333333333333333
3333333333333333333333
111
1111
1111
1111
1111
1111
1111
1111
1111
1111
1111
1111
1111
1111
1111
1111
1111
1111
1111
1111
1111
1111
AR
EA
CO
NTA
CT
0+0.
211
.3
0+0.
29.
8
(3.5
)
(3.5
)
AR
EA
CO
NTA
CT
(3.5
)
000
503
13.4
5
15.4
3.0
P2/P5 Type B Vertical Male Feed-Tofor BackplanesSeries 8071
• 110 signal contacts and 44 ground shield contacts in 5+2 rows of 22 positions
• Designed for gas tight press-fit installation• Used in position P2 and P5 of the CompactPCI specification• Twelve different contact styles are available for customizing
connector to exact specifications• For custom contact configurations complete the form on page 42
17 8071 154 000 833 = P2/P5 110 signal contacts and 44 ground contacts, Short Tail Std L2,3 cPCI17 8071 154 503 833 = P2/P5 110 signal contacts and 44 ground contacts, Short Tail Std L1,3 cPCIContact Elco for availability of alternate platings
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
18 ELCOELCO
P1 Type A Vertical Male Feed-Tofor Backplanes (Hot Swap)Series 8071
• 110 signal contacts and 44 ground shield contacts in 5+2 rows of 25 positions
• Center cavity with polarizing option (uses 3 positions)• See page 34 for keying options• Used in position P1 of the CompactPCI Hot Swap specification• Designed for gas tight press-fit installation• Twelve different contact styles are available for customizing
connector to exact specifications• For custom contact configurations complete the form on page 42
17 8071 154 508 833 = P1 110 signal contacts and 44 ground contacts, Short Tail, Hot SwapContact Elco for availability of alternate platings
9Z21XX
13.4
5
15.4
3.0
4.5
25 1
f
e
dcba
z
1 251
6
10
15 11
-0.2 049.9
MAX.0.95
TY
P.
2.0
2X6=
12.0
TYP.2.0
2X10=20.02X10=20.0
2X24=48.0
CONTACT DETAIL
P.C
.B.
AR
EA
CO
NTA
CTAR
EA
CO
NTA
CT
AR
EA
CO
NTA
CT
0+0.
211
.3
8.3
(3.5
)
(3.5
)
31
(3.5
)
2
9.8
abcdef
z
25 1
2
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 23333 3333 333 33 3 3 33 3 333
3
32
222
32222
32232
32322
32232
32222
32222
32322
32222
32322
32222
32122
32322
32222
32321
32222
32322
32232
32322
32232
32322
32222
1115
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
za
f
edcb
1 25 1115
2.0±0.1 TYP.
2.0±
0.1
TYP.
2X6-
12.0
±0.1
154- f0.6±0.05
Å0.
1
f2.
0
2X24=48.0±0.1
2X14=28.0±0.1
2X12=24.0±0.1
2X10=20.0±0.1
0+0.
2
0+0.
2
CONTACT LAYOUT(CONNECTOR MATING SIDE SHOWN)
19ELCOELCO
P3 Type B Vertical Male Feed-Tofor BackplanesSeries 8071
• 95 signal contacts and 38 ground shield contacts in 5+2 rows of 19 positions
• Designed for gas tight press-fit installation• This connector fills position P3 of the CompactPCI specification• Twelve different contact styles are available for customizing
connector to exact specifications• For custom contact configurations complete the form on page 43• This connector also fills position J0 of the VME64 Extension
Specification
17 8071 133 000 833 = P3 95 signal contacts and 38 ground contacts, Short Tail, L2,3 cPCI17 8071 133 503 833 = P3 95 signal contacts and 38 ground contacts, Short Tail, L1,3 cPCIContact Elco for availability of alternate platings
8N21XX
abcdef
z
19 1
22222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
3333333333333333333
3333333333333333333
abcdef
z
19 1
1
11111111111111111113333333333333333333
3333333333333333333
111
1111
1111
1111
1111
1111
1111
1111
1111
1111
1111
1111
1111
1111
1111
1111
1111
1111
1111
P.C
.B. A
RE
AC
ON
TAC
T
-0+0.
28.
3
CONTACT DETAIL
AR
EA
CO
NTA
CT
AR
EA
CO
NTA
CT
0+0.
211
.3
0+0.
29.
8(3
.5)
(3.5
)
(3.5
)
1 2 3
XX 11
1fed
cb
az
37.9
36.0
0.95 Max.
2.0 Typ.
2.0
Typ
.
2X6=
12.0
(COMPONENT SIDE SHOWN)RECOMMENDED P.C. BOARD LAYOUT
(CONNECTOR MATING SIDE SHOWN)CONTACT LAYOUT
aZ
e
f
dcb
1
2.0 ±0.1 TYP.
2 x
6 =
12.0
±0.
1
2.0
±0.1
TYP
000
503
19
13.4
5
15.4
3.0
133-f0.6±0.05
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
20 ELCOELCO
P4 Type A Vertical Male Feed-To for Backplanes (Computer Telephony)Series 8071
• 84 signal contacts and 16 ground shield contacts in 5 rows of 25positions selectively loaded
• Center cavity with polarization option (uses 3 positions)• See page 34 for keying options• Designed for gas tight press-fit installation• Fills position P4 of the CompactPCI Computer Telephony specifi-
cation• This connector has a bottom mounted peg to help secure the
connector to the printed circuit board
17 8071 100 511 833 = P4 Type A 84 signal contacts and 16 ground contacts, Short Tail (Computer Telephony)Contact Elco for availability of alternate platings
8N21XX
13.4
5
15.4
4.5
3.0
1 25 15 11
25 1
f
e
dcb
az
16
10
-0.2 049.9
MAX.0.95
TY
P.
2.0
TYP.2.0
2X5=
10.0
2X10=20.0 2X10=20.0
2X24=48.0
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
a
f
edc
b
1 25 1115
2.0±0.1 TYP.
2.0±
0.1
TYP.100-f0.6±0.05
f2.
0±0.
1
2X24=48.0±0.1
2X14=28.0±0.1
2X12=24.0±0.1
2X10=20.0±0.1
2X5=
10.0
±0.1
2X7=14.0±0.1
CONTACT DETAIL
P.C
.B.
AR
EA
CO
NTA
CTAR
EA
CO
NTA
CT
AR
EA
CO
NTA
CT
0+0.
211
.3 0+0.
28.
3(3
.5)
(3.5
)
31
(3.5
)
2
0 0+0.
2+
0.2
9.8
9.8
(CONNECTOR MATING SIDE SHOWN) CONTACTS LAYOUT
abcdef
z
25 1
2
2 2 2 2 2 2 2 2 2 2 2 3 2 3 2 2 2
3
2222
32222
32222
32212
32222
33222
2332322
32322
32322
32322
32322
32322
32322
32322
32322
33222
1115
21ELCOELCOELCOELCO
Type B Vertical Male Feed-To for BackplanesSeries 8071
• 125 signal contacts and 50 ground shield contacts in 5+2 rows of 25 positions
• Designed for gas tight press-fit installation• Twelve different contact styles are available for customizing
connector to exact specifications• For custom contact configurations complete the form on page 43
17 8071 175 000 833 = 125 signal contacts and 50 ground contacts, Short Tail L2,3 cPCI17 8071 175 503 833 = 125 signal contacts and 50 ground contacts, Short Tail L1,3 cPCIContact Elco for availability of alternate platings
9Z21XX
XX 1
125fed
cb
az
49.9
0.95max.
PITCH 2.0
48.0
PIT
CH
2.0
2X4=
8.0
25
175-ø0.6
2.0
±0.1
Typ
.
2.0 ±0.1 Typ.
48.0 ±0.1
±0.05
2 X
6 =
12.
0 ±0
.1
abcdef
z25 1
222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
(CONNECTOR SIDE SHOWN)CONTACT LAYOUT
za
f
edcb
1
abcdef
z3 3 3 33 3 3 33 3 33 3333 3333 3 3 3
3
3
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
25 1
11 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
11 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 111 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 111 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 111 1 1 1 1 1 1 1 1 1 1
3
3
1
1111 1 1 1 1 1 1 1 1 1 1 1 1
3 3 3 33 3 3 33 3 33 3333 3333 3 3 3
3
3
3 3 3 3 3 3 3 3 3 3 3
22222
3
3 3 3 3 3 3 3 3 3 3 3 3 3
13.4
5
15.4
3.0
CONTACT DETAIL
P.C
.B.
AR
EA
CO
NTA
CTA
RE
AC
ON
TAC
T
0+0.
29.
8 0+0.
28.
3(3
.5)
(3.5
)
AR
EA
CO
NTA
CT
0+0.
211
.3(3
.5)
000
503
1 2 3
22 ELCOELCO
Type C Vertical Male Feed-Tofor BackplanesSeries 8071
• 55 signal contacts and 22 ground shield contacts in 5+2 rows of11 positions
• Designed for gas tight press-fit installation• This connector is designed for end positions only• Twelve different contact styles are available for customizing con-
nector to exact specifications• For custom contact configurations complete the form on page 43
17 8071 077 509 833 = 55 signal contacts and 22 ground contacts, Short Tail, L1,317 8071 077 512 833 = 55 signal contacts and 22 ground contacts, Short Tail, L2,3Contact Elco for availability of alternate platings
9Z21XX
13.4
5
15.4
4.5
3.0
1
fe
dcba
zz
1
10
11
77P
ELC
O 8
071
MAX.0.95
2X10=20.0
TYP.2.0
-0.2 024.95
TY
P.
2.0
2X6=
12.0
z
f
dcb
1
a
e
11
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
2.0±0.1 TYP.
77-f0.6±0.05
f2.
0±0.
1
2X10=20.0±0.1
2X10+3=23.0±0.1
2.0±
0.1
TYP.
2X6=
12.0
±0.1
(CONNECTOR MATING SIDE SHOWN) CONTACT LAYOUT
abcdef
z
1
311111111111111
3
111
3
111
3
111
3
111
3
111
3
111
3
111
3
111
3
111
3
111
11
1 1 1 1 1 1 1 1 1 1 13 3 3 3 3 3 3 3 3 3 3
(CONNECTOR MATING SIDE SHOWN) CONTACT LAYOUT
abcdef
z
1
322222222222222
3
222
3
222
3
222
3
222
3
222
3
222
3
222
3
222
3
222
3
222
11
2 2 2 2 2 2 2 2 2 2 23 3 3 3 3 3 3 3 3 3 3
P.C
.B.
AR
EA
CO
NTA
CT
(3.5
) 0+
0.2
8.3
CONTACT DETAIL
509
512A
RE
AC
ON
TAC
T
AR
EA
CO
NTA
CT
0+0.
211
.3(3
.5)
3
(3.5
)
1
0+0.
29.
8
2
23ELCOELCO 23ELCOELCO
• 125 signal contacts and 50 ground shield contacts in 5+2 rows of25 positions
• Designed for gas tight press-fit installation• Twelve different contact styles for customizing connector to exact
specifications• For custom contact configurations complete the form on page 43
17 8071 175 003 515 = 125 signal contacts and 50 ground contacts, Long Tail L2,3 cPCI17 8071 175 015 515 = 125 signal contacts and 50 ground contacts, Long Tail L1,3 cPCIContact Elco for availability of alternate platings
Type B Vertical Male Feed-Thrufor BackplanesSeries 8071
9Z21XX
13.4
5
15.4
3.0
XX 1
125
f
e
dcba
z
MAX.0.95
49.9
TY
P.
2.0
2X6=
12.0
48.0
TYP.2.0
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
(CONNECTOR SIDE SHOWN)CONTACT LAYOUT
za
f
edcb
125
2.0 ±0.1 Typ.
2.0
±0.1
Typ
.
2 x
6 =
12.
0 ±0
.1
2X (N/7-1) = A ±0.1
±0.05175-ø0.6
AR
EA
CO
NTA
CT
AR
EA
CO
NTA
CT
PR
ES
S F
IT A
RE
A
AR
EA
CO
NTA
CT
PR
ES
S F
IT A
RE
A
AR
EA
CO
NTA
CT
0+0.
211
.3(1
6.0)
0+0.
29.
8(1
4.5)
abcdef
zT T T TT T T TT T TT TTTT TTTT T T T
T
T
T T T T T T T T T T T T T T T T T T T T T T T
P
25 003003
015015
1
P
P
PP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
13.4
5
15.4
3.0
P.C
.B.
AR
EA
CO
NT
AC
TA
RE
AC
ON
TA
CT
PR
ES
S F
IT A
RE
A
(16.
0) 0+
0.2
8.3
W
1
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WW
W
W
25
W
TTTTTTTTTTTTTTTTTTTTTTT
T
T
TTTT T T TT T T TT TTT TTTT TTTT z
fedcba
W P T
24 ELCOELCO
P2/P5 Type B Vertical Male Feed-Thru for BackplanesSeries 8071
• 110 signal contacts and 44 ground shield contacts in 5+2 rows of 22 positions
• Designed for gas tight press-fit installation• Fills positions P2 and P5 of the CompactPCI specification• Twelve different contact styles are available for customizing
connector to exact specifications• For custom contact configurations complete the form on page 42
17 8071 154 003 515 = P2/P5 110 signal contacts and 44 ground contacts, Long Tail Std L2,3 cPCI17 8071 154 004 515 = P2/P5 110 signal contacts and 44 ground contacts, Long Tail Std L1,3 cPCI17 8071 154 015 515 = P2/P5 110 signal contacts and 44 ground contacts, Long Tail Std L1,3 cPCIContact Elco for availability of alternate platings
XX 1
122f
e
dcba
z
MAX.0.95
43.9
TY
P.
2.0
2X6=
12.0
42.0
TYP.2.0
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
za
f
edcb
122
2.0±0.1 TYP.
2.0±
0.1
TYP.
2X6=
12.0
±0.1
42.0 ±0.1
154-f0.6±0.05
8N21XX
CONTACT DETAIL
AR
EA
CO
NTA
CT
AR
EA
CO
NTA
CT
PR
ES
S F
IT A
RE
A
AR
EA
CO
NTA
CT
PR
ES
S F
IT A
RE
A
AR
EA
CO
NTA
CT
11.3
(16.
0)
9.8
(14.
5)
AR
EA
CO
NTA
CT
AR
EA
CO
NTA
CT
PR
ES
S F
IT A
RE
A
(16.
0)8.
3P.C
.B.
AR
EA
CO
NTA
CT
PR
ES
S F
IT A
RE
A
AR
EA
CO
NTA
CT
(13.
0) 0+
0.2
8.3
0+0.
2 0+0.
2 0+0.
2
M W P T
25ELCOELCO
Variation Code Side View Pin Loading
003
Long Tail, Std.
L2, 3
P2/P5
004
Long Tail, Std.
L1, 3
P2/P5
015
Long Tail, Std.
L1, 3
P2/P5
P2/P5 Type B Vertical Male Feed-Thru for BackplanesSeries 8071
13.4
5
15.4
3.0 T T T TT T T TT
T T T T T T T T T
22
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP a
bcdef
zTT TTTT TTTT T T T
TT T T T T T T T T T T T
P
1
P
P
PP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
T T T TT T T TT
T T T T T T T T T
22
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM a
bcdef
zTT TTTT TTTT T T T
TT T T T T T T T T T T T
M
1
M
M
MM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM13
.45
15.4
3.0
T T T TT T T TT
T T T T T T T T T
22
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW a
bcdef
zTT TTTT TTTT T T T
TT T T T T T T T T T T T
W
1
W
W
WW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW13
.45
15.4
3.0
26 ELCOELCO
P3 Type B Vertical Male Feed-Thrufor BackplanesSeries 8071
• 95 signal contacts and 38 ground shield contacts in 5+2 rows of19 positions
• Designed for gas tight press-fit installation• Fills position P3 of the CompactPCI specification• Twelve different contact styles are available for customizing con-
nector to exact specifications• For custom contact configurations complete the form on page 43
17 8071 133 003 515 = P3 95 signal contacts and 38 ground contacts, Long Tail Std L2,3 cPCI17 8071 133 004 515 = P3 95 signal contacts and 38 ground contacts, Long Tail Std L1,3 cPCI17 8071 133 015 515 = P3 95 signal contacts and 38 ground contacts, Long Tail Std L1,3 cPCIContact Elco for availability of alternate platings
XX 1
119f
e
dcba
z
MAX.0.95
37.9
TY
P.
2.0
2X6=
12.0
36.0
TYP.2.0
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
za
f
edcb
119
2.0±0.1 TYP.
2.0±
0.1
TYP.
2X6=
12.0
±0.1
36.0±0.1
133-f0.6±0.05
8N21XX
CONTACT DETAIL
AR
EA
CO
NTA
CT
AR
EA
CO
NTA
CT
PR
ES
S F
IT A
RE
A
AR
EA
CO
NTA
CT
PR
ES
S F
IT A
RE
A
AR
EA
CO
NTA
CT
11.3
(16.
0)
9.8
(14.
5)
AR
EA
CO
NTA
CT
AR
EA
CO
NTA
CT
PR
ES
S F
IT A
RE
A
(16.
0)8.
3P.C
.B.
AR
EA
CO
NTA
CT
PR
ES
S F
IT A
RE
A
AR
EA
CO
NTA
CT
(13.
0) 0+
0.2
8.3
0+0.
2 0+0.
2 0+0.
2
M W P T
27ELCOELCO
P3 Type B Vertical Male Feed-Thrufor BackplanesSeries 8071
Variation Code Side View Pin Loading
003
Long Tail, Std.
L2, 3
P3
004
Long Tail, Std.
L1, 3
P3
015
Long Tail, Std.
L1, 3
P3
13.4
5
15.4
3.0 T T T TT T T TT
T T T T T T T T T
19
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP a
bcdef
zTTT TTTT T T T
T T T T T T T T T T
1
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
PPPPP
T T T TT T T TT
T T T T T T T T T
19
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM a
bcdef
zTTT TTTT T T T
T T T T T T T T T T
1
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
13.4
5
15.4
3.0
T T T TT T T TT
T T T T T T T T T
19
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW a
bcdef
zTTT TTTT T T T
T T T T T T T T T T
1
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
WWWWW
13.4
5
15.4
3.0
28 ELCOELCO
P4 Type A Vertical Male Feed-Thrufor BackplanesSeries 8071
• 110 signal contacts and 44 ground shield contacts in 5 rows of 25 positions
• Center cavity with polarizing option (uses 3 positions)• See page 34 for keying options• Designed for gas tight press-fit installation• Fills position P4 of the CompactPCI specification• Twelve different contact styles are available for customizing
connector to exact specifications• For custom contact configurations complete the form on page 42• This connector has a bottom mounted peg to help secure the
connector to the printed circuit board
17 8071 154 013 515 = P4 110 signal contacts and 44 ground contacts, Long Tail, L2,3 cPCI17 8071 154 014 515 = P4 110 signal contacts and 44 ground contacts, Long Tail, L1,3 cPCIContact Elco for availability of alternate platings
9Z21XX
25 1
f
e
dcba
z
1 25
16
10
15 11
-0.2 049.9
MAX.0.95
TY
P.
2.0
2X6=
12.0
TYP.2.0
2X10=20.02X10=20.0
2X24=48.0
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
za
f
edcb
1 25 1115
2.0±0.1 TYP.
2.0±
0.1
TYP.
2X6=
12.0
±0.1
154-f0.6±0.05
f2.
0±0.
1
2X24=48.0±0.1
2X14=28.0±0.1
2X12=24.0±0.1
2X10=20.0±0.1
15 11
PPPPT
PPPPT
PPPPT
PPPPT
PPPPT
PPPPT
PPPPT
PPPPT
PPPPT
PPPPT
PPPPT
PPPPT
PPPPT
PPPPT
PPPPT
PPPPT
PPPPT
PPPPT
PPPPT
PPPPT
PPPPT
PPP
PT
T
TTT T TT T T TT TTT TTTT TTTTP P P P P P P P P P P P P P P P P P P P P
P
125
z
fedcba
AR
EA
CO
NTA
CT
AR
EA
CO
NTA
CT
PR
ES
S F
IT A
RE
A
AR
EA
CO
NTA
CT
PR
ES
S F
IT A
RE
A
AR
EA
CO
NTA
CT
P
0+0.
211
.3
0+0.
29.
8
T
(16.
0)
(14.
5)
W
13.4
5
15.4
3.0
4.5
013
013
014 014
P.C
.B.
AR
EA
CO
NTA
CT
AR
EA
CO
NTA
CT
PR
ES
S F
IT A
RE
A
(16.
0) 0+
0.2
8.3
15 11
WWWWT
WWWWT
WWWWT
WWWWT
WWWWT
WWWWT
WWWWT
WWWWT
WWWWT
WWWWT
WWWWT
WWWWT
WWWWT
WWWWT
WWWWT
WWWWT
WWWWT
WWWWT
WWWWT
WWWWT
WWWWT
WWW
WT
T
TTT T TT T T TT TTT TTTT TTTTW W W W W W W W W W W W W W W W W W W W W
W
125
z
fedcba
13.4
5
15.4
3.0
4.5
29ELCOELCO
• 110 signal contacts and 22 ground shield contacts in 5+1 rows of 22 positions
• Designed for gas tight press-fit installation• Fills position P5 of the CompactPCI Computer Telephony specifi-
cation• Twelve different contact styles are available for customizing
connector to exact specifications
17 8071 132 016 515 = P5 110 signal contacts and 22 ground contacts, Long Tail (Computer Telephony)Contact Elco for availability of alternate platings
P5 Type B Vertical Male Feed-Thrufor Backplanes (Computer Telephony)Series 8071
8N21XX13.4
5
15.4
3.0
22 1
122f
e
dcb
az
MAX.0.95
TYP.2.0
-0.2 043.9
2X21=42.0
TY
P.
2.0
2X5=
10.0
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
(CONNECTOR SIDE SHOWN)CONTACT LAYOUT
a
f
edc
b
122
2.0±0.1 TYP.
2.0±
0.1
TYP.
132-f0.6±0.05
2X21=42.0±0.1
2X5=
10.0
±0.1
CONTACT DETAIL
P.C
.B.
M
AR
EA
CO
NTA
CT
AR
EA
CO
NTA
CT
T
PR
ES
S F
IT A
RE
A
AR
EA
CO
NTA
CT
PR
ES
S F
IT A
RE
A
AR
EA
CO
NTA
CT
AR
EA
CO
NTA
CT
AR
EA
CO
NTA
CT
PR
ES
S F
IT A
RE
A
P
11.3
(13.
0)
(16.
0)
9.8
0+0.
28.
3
(14.
5)
MMM
MM
T
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
MMMMM
PPPPP
PPPPP
PPPPP
PPPPP
122
TTTTTTTTTTTTTTTTTTTTT
z
fedcba
0+0.
2 0+0.
2
30 ELCOELCO
0.6 x 0.64.5 Max.
10.2 -0.288.9
7.62
2.547 x 2.54= 17.78
3 x 7.62= 22.86
29 x 2.54 = 73.66
94 Max.
2.542.54
5.08
11.1 Max.
3.0 +0.2-0.4
ab
c
ab
c 258111314192022252831
Style M DIN EuroCard Power ConnectorSeries 8483/8485
• 7 power contacts• 24 signal contacts• Designed for gas tight press-fit installation• Connector in accordance with DIN41612 • Contacts in accordance with DNB41626• Male designed for daughter card applications• Female designed for backplane applications• Designed for CompactPCI 3V and 6V boards
59 8483 024 000 025 = Male, Right Angle, 7 Power and 24 Signal Contacts59 8485 024 000 015 = Female, Vertical, 7 Power and 24 Signal Contacts
0.6 x 0.6
12.6 Max.
8.5 -0.1
10.6 -0.2
85.0 -0.295.0 Max.
Ø5.8 Max.
4.90 Max.11.6 Max.
5.3 ±0.3
2.54
5.08
90 ±0.17 x 2.54 = 17.78
3 x 7.62 = 22.86
29 x 2.54 = 73.66
2.54
7.62
0.3
31ELCOELCO
Type L Vertical Male for BackplanesSeries 8074
• 6 power contact cavities • Center cavity with pre-alignment guides and polarizing option• Supplied with locating pegs for secure P.C. board mounting• Power contact is ordered separately
61 8074 006 001 007 = Type L 6 positionpower connector with polarizing key, (housing only)Power Contact: P/N 71 8074 000 501 863 orderedseparately
2601
61
02
42
6.257.57.5 7.5
2.0
15.4
3.7 Max.
RECOMMENDED P.C. BOARD LAYOUT(COMPONENT SIDE)
7.56.25
4.5
3.0
13.45
5.56.257.57.5 7.57.56.25
7.5 10.0 10.0
49.9 0-0.2
7.5
10.07.5 7.510.0
5.5
4.5Ø2.0 ±0.1
HO
LE
0.10.1
6 - Ø5.9 +0.2
HOLE-0
Ø2.0 +0.05-0
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
POWERCONTACT
71 8074 000 501 863 80 8074 000 001 062
32 ELCOELCO
Type M Vertical Male Feed-To for BackplanesSeries 8075
• 3 power contact cavities• 55 signal contacts• Center cavity with pre-alignment guides and polarizing option• Designed for gas tight press-fit installation• Supplied with locating pegs for secure P.C. board mounting• Power contact is ordered separately• See page 31 for contact part number
17 8075 355 501 833 = Type M 3 position power connector with polarizing key, with 55 signal contactsContact Elco for availability of alternate platings
2601
15
15 11 1
25
25
11111
11111
11111
11111
11111
11111
11111
11111
11111
11111
11111
1015 6 225
ab
cde
za
zabcdef
bc
def
61
62
4.0
2 x 10 = 20.0
2.0 TYP.
2.0 TYP.2 x 4 = 8.0
7.5
2.0
0.95 Max.
15.4
RECOMMENDED P.C. BOARD LAYOUT(COMPONENT SIDE)
CONTACT LAYOUT(CONNECTOR MATING SIDE SHOWN)
7.56.25
3.0
(3.5)13.45
7.57.56.25
2.0 TYP.2 x 4 = 8.0
49.9 0-0.2
9Z21XX
P.C.B.
1
CONTACTAREA
7.510.024.0
2 x 10 = 20.02.0 TYP.
5.5
4.5Ø2.0 ±0.1
HO
LE
55 - Ø0.6 ±0.05 HOLE0.1
0.1
0.1
3 - Ø5.9 +0.2
HOLE-0 8.3 +0.2
-0
5 - Ø2.0 +0.05-0
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
33ELCOELCO
Application and InstallationTooling
MALE CONNECTORS POSITIONS LENGTH PART #Type A male 22 49.9mm 66 3015 344 000 000Type B male 19 37.9mm 66 3015 347 000 000Type B male 22 43.9mm 66 3015 346 000 000Type B male 25 49.9mm 66 3015 345 000 000Type C male 11 22.3mm 66 3015 348 000 000
FEMALE CONNECTORS (With Upper Shield)Type A female 22 49.9mm Type B female 19 37.9mm Type B female 22 43.9mm Type B female 25 49.9mm Type C female 11
BASE BLOCK All 66 3015 349 000 000
PRESS FIT MACHINE Daughter 36 1004 028 000 000
HAND PRESS 36 1004 030 000 000
PLUG PRESS Backplane 36 1004 029 000 000
RECEPTACLE REPAIR JIG 06 1002 063 000 000
INSTALLATION TOOL FOR CODING KEYS 06 1002 066 000 000
34 ELCOELCO
Coding Keys: Type A Male (Backplane)Type A Female (Daughter Card)Series 8071CompactPCI supports two types of voltages (3.3V and 5.0V).Coding keys are used to prevent damage by inserting the wrongboards into a system. Keys are snapped into the center
polarization cavity. 3.3V cards are coded cadmium yellow and5.0V are brilliant blue.
101 003 102 006 103 008 104 002Cadmium Brilliant Pastel Strawberry
Yellow Blue Orange Red
MALE101 003 102 006 103 008 104 002Cadmium Brilliant Pastel Strawberry
Yellow Blue Orange Red
FEMALE
Color Ral Number Code No. Key Part Number Plug/ReceptacleCadmium Yellow 1021 3456 81 8071 000 101003 Plug 3.3V C-PCIBrilliant Blue 5007 1567 81 8071 000 102006 Plug 5.0V C-PCIPastel Orange 2003 3568 81 8071 000 103008 PlugStrawberry Red 3018 1248 81 8071 000 104002 PlugCadmium Yellow 1021 1278 82 8071 000 101003 Receptacle 3.3V C-PCIBrilliant Blue 5007 2348 82 8071 000 102006 Receptacle 5.0V C-PCIPastel Orange 2003 1247 82 8071 000 103008 ReceptacleStrawberry Red 3018 3567 82 8071 000 104002 Receptacle
35ELCOELCO
abc
de
2515111
TY
P.
2.0
2X4=
8.0
MAX.0.95
TYP.2.0
-0.2 049.9
15.4
2X10=20.0
2X24=48.0
2X10=20.0
TYP. 2.0
3.0
2X4=8.0
7.4
5.3
1.8
(5.15)
abcde
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
2.0±0.1 TYP.
2X10=20.0±0.1
2X14=28.0±0.1
2X24=48.0±0.1
2.0±
0.1
TYP.
2x4=
8.0±
0.1
MA
X.
1.5
HOLES110-f0.6±0.05
8N21XX
Type A Right Angle Male forDaughter CardsSeries 8072
• 110 signal contacts • Designed for gas tight press-fit installation• Center cavity with pre-alignment guides and polarization option
(uses 3 positions)• This connector can be used by itself or in conjunction with style B
connectors• See page 34 for keying options
17 8072 110 001 833 = Type A Right Angle MaleContact Elco for availability of alternate platings
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
36 ELCOELCO
abc
de
N/51
TY
P.
2.0
2X4=
8.0
MAX.0.95
TYP.2.0
-0.2 0B
15.4
2X(N/5-1)=A
P/N
17 8072 125 000 833
A B
48.0 49.9
36.017 8072 095 000 833 37.9
42.017 8072 110 000 833 43.9
TYP.2.0
3.0
2X4=8.0
7.4
5.3
1.8
(5.15)
abcde
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
2.0±0.1 TYP.
2X (N/5-1) = A±0.1
2.0±
0.1
TYP.
2X4=
8.0±
0.1
MA
X.
1.5
HOLESN-f0.6±0.05
Type B Right Angle Male forDaughter CardsSeries 8072
• 95, 110, 125 signal contacts • Designed for gas tight press-fit installation• This connector should be used in conjunction with a Type A style
to ensure proper alignment• Daughter card applications
17 8072 095 000 833 = Type B Right Angle Male, 5x19 Positions17 8072 110 000 833 = Type B Right Angle Male, 5x22 Positions17 8072 125 000 833 = Type B Right Angle Male, 5x25 PositionsContact Elco for availability of alternate platings
(COMPONENT SIDE)RECOMMENDED P.C. BOARD LAYOUT
37ELCOELCO
15.4
H
L
25 1
10
16
125 15 11
PITCH 2.0
2x10=20.0
PIT
CH
2.0
2x6=
12.0
-0.2+049.9
0.95max.
2x10=20.0
1
10
111
77P
ELC
O 8
07
1
PITCH 2.0
2x10=20.0
PIT
CH
2.0
2x6=
12.0
max.0.95
-0.2+024.95
TYPE A TYPE C
RP4 Shroud, Type A & Cfor BackplanesSeries 8071
• Used in conjunction with feedthru connectors • When installed over the long tails, a male connector is created • Enables rear Input/Output or midplane applications with daughter
cards or cable assemblies• No spacer required• Three heights available to accommodate different board
thicknesses
61 8071 154 301 007 = RP4 Type A 154 cavities (22 position) L = 3.0, H = 13.45, PCB Thickness: 4.8mm61 8071 154 311 007 = RP4 Type A 154 cavities (22 position) L = 3.8, H = 14.25, PCB Thickness: 4.0mm61 8071 154 321 007 = RP4 Type A 154 cavities (22 position) L = 4.6, H = 15.05, PCB Thickness: 3.2mm61 8071 077 301 007 = Type C 77 cavities (11 position) L = 3.0, H = 13.45, PCB Thickness: 4.8mm61 8071 077 311 007 = Type C 77 cavities (11 position) L = 3.8, H = 14.25, PCB Thickness: 4.0mm61 8071 077 321 007 = Type C 77 cavities (11 position) L = 4.6, H = 15.05, PCB Thickness: 3.2mm
38 ELCOELCO
RP2, 3, 5 Shroud, Type Bfor BackplanesSeries 8071
• Used in conjunction with feedthru connectors • When installed over the long tails, a male connector is created • Enables rear Input/Output or midplane applications with daughter
cards or cable assemblies• No spacer required• Three heights available to accommodate different board
thicknesses
61 8071 133 300 007 = RP3 Type B 133 cavities (19 position) L = 3.0, H = 13.45, PCB Thickness: 4.8mm61 8071 133 310 007 = RP3 Type B 133 cavities (19 position) L = 3.8, H = 14.25, PCB Thickness: 4.0mm61 8071 133 320 007 = RP3 Type B 133 cavities (19 position) L = 4.6, H = 15.05, PCB Thickness: 3.2mm61 8071 154 300 007 = RP2, 5 Type B 154 cavities (22 position) L = 3.0, H = 13.45, PCB Thickness: 4.8mm61 8071 154 310 007 = RP2, 5 Type B 154 cavities (22 position) L = 3.8, H = 14.25, PCB Thickness: 4.0mm61 8071 154 320 007 = RP2, 5 Type B 154 cavities (22 position) L = 4.6, H = 15.05, PCB Thickness: 3.2mm61 8071 175 300 007 = Type B 175 cavities (25 position) L = 3.0, H = 13.45 , PCB Thickness: 4.8mm61 8071 175 310 007 = Type B 175 cavities (25 position) L = 3.8, H = 14.25, PCB Thickness: 4.0mm61 8071 175 320 007 = Type B 175 cavities (25 position) L = 4.6, H = 15.05, PCB Thickness: 3.2mm
P/N A B
61 8071 175 XXX 007
61 8071 133 XXX 007
61 8071 154 XXX 007
48.0 49.9
36.0 37.9
42.0 43.9
# OF POSITIONS
25
19
22
15.4
L
H
XX 1
1N/7
PIT
CH
2.0
-0.2+0B
MAX.0.95
PITCH 2.0
2X(N/7-1)=A
2X6=
12.0
39ELCOELCO
Power Pack ConnectorsSeries 2525
• Efficient system for high current distribution in backplaneapplications
• Press-in element for power connection for P.C. boards• VARIPIN™ press-fit design• 30A current rating• Several different connection versions available• Suitable for circuit boards with .063 (1.6mm) minimum thickness• Plating SnPb over Ni
37 2525 0213 01 489 = M 4 thread, with flat tabs, with hardware37 2525 0213 02 489 = M 4 thread, without tabs, with hardware37 2525 0213 03 489 = M 4 thread, with 45 degree tabs67 2525 0213 01 489 = M 4 thread, with flat tabs, without hardware67 2525 0213 02 489 = M 4 thread, without tabs, without hardware67 2525 0213 03 489 = M 4 thread, with 45 degree tabs
40 ELCOELCO40 ELCOELCO
5 Position ModularInput/Output CableSeries 8073
• 2.0mm pitch 5 position +2 ground position double ended modular assembly
• Modular snap-together feature allows for stacking into assembliesof up to 25 to interface with 55, 110, and 125 pin male connectors
• Outside shields mate with rows z and f rows of 2mm hard-metricmale connectors
• 28 AWG• 1.0A, 250V max• 500mm to 2500mm long• Custom lengths available
97 8073 002 050 001 = 5 position cable assembly, double ended, 500mm long97 8073 002 100 001 = 5 position cable assembly, double ended, 1000mm long97 8073 002 150 001 = 5 position cable assembly, double ended, 1500mm long97 8073 002 200 001 = 5 position cable assembly, double ended, 2000mm long97 8073 002 250 001 = 5 position cable assembly, double ended, 2500mm longContact Elco for availability of alternate lengths
A SIDE B SIDEz Row Gnd z Rowa Row Signal 1 a Rowb Row Signal 2 b Rowc Row Gnd c Rowd Row Signal 3 d Rowe Row Signal 4 e Rowf Row Gnd f Row
WIRING PATTERN Cable Structure
41ELCOELCO
Part Number IndexElco Multi-Line Module Connector 2mm Hard-Metric for CompactPCI
PART NUMBER PAGE06 1002 063 000 000 3306 1002 066 000 000 3317 8071 077 509 833 2217 8071 077 512 833 2217 8071 100 511 833 2017 8071 132 016 515 2917 8071 133 000 833 1917 8071 133 003 515 2617 8071 133 004 515 2617 8071 133 015 515 2617 8071 133 503 833 1917 8071 154 000 833 1717 8071 154 001 833 1617 8071 154 003 515 2417 8071 154 004 515 2417 8071 154 013 515 2817 8071 154 014 515 2817 8071 154 015 515 2417 8071 154 503 833 1717 8071 154 508 833 1817 8071 175 000 833 2117 8071 175 003 515 2317 8071 175 015 515 2317 8071 175 503 833 2117 8072 095 000 833 3617 8072 110 000 833 3617 8072 110 001 833 3517 8072 125 000 833 3617 8075 355 501 833 3227 8071 055 001 833 1527 8071 055 002 833 1527 8071 055 011 833 1527 8071 055 012 833 1527 8071 090 501 833 1327 8071 090 502 833 1327 8071 095 000 833 1227 8071 095 010 833 1227 8071 110 000 833 1127 8071 110 001 833 1027 8071 110 002 833 1027 8071 110 010 833 1127 8071 110 011 833 1027 8071 110 012 833 1027 8071 125 010 833 1427 8071 125 000 833 1436 1004 028 000 000 33
PART NUMBER PAGE36 1004 029 000 000 3336 1004 030 000 000 3337 2525 0213 01 489 3937 2525 0213 02 489 3937 2525 0213 03 489 3959 8483 024 000 025 3059 8485 024 000 015 3061 8071 077 301 007 3761 8071 077 311 007 3761 8071 077 321 007 3761 8071 133 300 007 3861 8071 133 310 007 3861 8071 133 320 007 3861 8071 154 300 007 3861 8071 154 301 007 3761 8071 154 310 007 3861 8071 154 311 007 3761 8071 154 320 007 3861 8071 154 321 007 3761 8071 175 300 007 3861 8071 175 310 007 3861 8071 175 320 007 3861 8074 006 001 007 3166 3015 344 000 000 3366 3015 345 000 000 3366 3015 346 000 000 3366 3015 347 000 000 3366 3015 348 000 000 3366 3015 349 000 000 3367 2525 0213 01 489 3967 2525 0213 02 489 3967 2525 0213 03 489 3971 8074 000 501 863 3181 8071 000 101003 3481 8071 000 102006 3481 8071 000 103008 3481 8071 000 104002 3482 8071 000 101003 3482 8071 000 102006 3482 8071 000 103008 3482 8071 000 104002 3497 8073 002 050 001 4097 8073 002 100 001 4097 8073 002 150 001 4097 8073 002 200 001 4097 8073 002 250 001 40
42 ELCOELCO
21 2019 1718 16 15 1422
abcdef
z13 2469 8101213 11 7 5
TYPE B (22 POSITIONS)
CONTACT STYLES
ELCO Connectors2mm Hard-Metric Custom Design Worksheet
Name _______________________________________________________ Title ___________________________________________
Company ____________________________________________________ email __________________________________________
Address _____________________________________________________________________________________________________
City _________________________________________________________ State __________________ Zip ____________________
Telephone_______________________________ Fax _________________________________________For special loading configuration for your application, use this form. Select the grid diagram that applies to the type connectorstyle you need. Fill in each block with the pin style (from the table) that you need. Please leave unloaded positions or rows blank.
Fax To: Elco ConnectorsNorth America: Fax: 843-626-5814
Tel: 843-946-0634Europe: Fax: ++44 (0)1252 770001
Tel: ++44 (0)1252 770000Asia-Pacific: Fax: (65) 350-4880
Tel: (65) 258-2833
abcdef
z
25 1111524 23 22 21 20 19 18 1716 10 9 8 7 6 5 4 3 2
TYPE A
u With location peg (Female only) u Without location peg (Female only)
43ELCOELCO
ELCO Connectors2mm Hard-Metric Custom Design Worksheet
19 1718 16 15 14
abcdef
z13 2469 8101213 11 7 5
abcdef
z13 2469 81011 7 5
TYPE B (19 POSITIONS) TYPE C
21 2019 1718 16 15 1422
abcdef
z13 2469 8101213 11 7 524 2325 21 2019 1718 16 152224 2325
TYPE B (25 POSITIONS) TYPE M
CONTACT STYLES
Name _______________________________________________________ Title ___________________________________________
Company ____________________________________________________ email __________________________________________
Address _____________________________________________________________________________________________________
City _________________________________________________________ State __________________ Zip ____________________
Telephone_______________________________ Fax _________________________________________For special loading configuration for your application, use this form. Select the grid diagram that applies to the type connectorstyle you need. Fill in each block with the pin style (from the table) that you need. Please leave unloaded positions or rows blank.
Fax To: Elco ConnectorsNorth America: Fax: 843-626-5814
Tel: 843-946-0634Europe: Fax: ++44 (0)1252 770001
Tel: ++44 (0)1252 770000Asia-Pacific: Fax: (65) 350-4880
Tel: (65) 258-2833
44 ELCOELCO
Internet/FAX/CD Rom/SoftwareNeed Additional Information on AVX Products
AVX Products
CONNECTORS2mm Hard-Metric for CompactPCI®
Automotive Connectors
Board to Board Connectors – SMT and Through-Hole
Card Edge
Compact Flash
Custom Designed Connectors
Customized Backpanel, Racking and Harnessing Services
DIN 41612 Connectors
Insulation Displacement Connectors
I/O Connectors
Memory Card Headers and Sockets
MOBOTM, I/O, Board to Board and Battery Connectors
PCMCIA
Press-fit Connectors
Torson, 1.27mm (.050") Board to Board Connectors
Varicon®
Wire to Board, Crimp or IDC
PASSIVESCapacitors
Multilayer CeramicTantalumMicrowaveGlassFilmPower FilmPower CeramicCeramic DiscTrimmers
ResistorsChipNetworks/ArraysPotentiometers
Timing DevicesResonatorsOscillatorsCrystal
FiltersEMIBulkSawDielectric
Thin FilmInductorsFusesCapacitors
Integrated PassiveComponentsLow Inductance Chip Arrays“Z” ChipsCapacitor ArraysDual Resonance Chips
Voltage Suppressor, Varistors and Thermistors
Acoustical Piezos
Ferrites
Internet –For more information visit us on theworldwide web athttp://www.avxcorp.com
FAX Back Service –Just dial 1-800-700-2860 and requestthe index for additional cataloginformation faxed to your FAX number.
CD ROM –Or get in touch with your AVXrepresentative for a CD Rom or copies ofthe catalogs and technical papers.
Software –Comprehensive capacitor applicationsoftware library which includes:
SpiCap (for MLC chip capacitors)SpiTan (for tantalum capacitors)SpiCalci (for power supply capacitors)SpiMic (for RF-Microwave capacitors)
NOTICE: Specifications are subject to change without notice. Contact your nearest AVX Sales Office for the latest specifications. Allstatements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, orresponsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made withoutrepresentation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The usershould not assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may notapply to all applications.
S-2MMHM2.5M100-C
Elco – World Class Connections
Contact:
USA
AVX Myrtle Beach, SCCorporate Offices
Tel: 843-448-9411FAX: 843-626-5186
AVX Northwest, WATel: 360-669-8746
FAX: 360-699-8751
AVX North Central, INTel: 317-848-7153
FAX: 317-844-9314
AVX Northeast, MATel: 508-485-8114
FAX: 508-485-8471
AVX Mid-Pacific, CATel: 408-436-5400
FAX: 408-437-1500
AVX Southwest, AZTel: 602-539-1496
FAX: 602-539-1501
AVX South Central, TXTel: 972-669-1223
FAX: 972-669-2090
AVX Southeast, NCTel: 919-878-6357
FAX: 919-878-6462
AVX CanadaTel: 905-564-8959
FAX: 905-564-9728
EUROPE
AVX Limited, EnglandEuropean Headquarters
Tel: ++44 (0)1252 770000FAX: ++44 (0)1252 770001
AVX S.A., FranceTel: ++33 (1) 69.18.46.00
FAX: ++33 (1) 69.28.73.87
AVX GmbH, Germany - AVXTel: ++49 (0) 8131 9004-0
FAX: ++49 (0) 8131 9004-44
AVX GmbH, Germany - ElcoTel: ++49 (0) 2741 2990
FAX: ++49 (0) 2741 299133
AVX srl, ItalyTel: ++390 (0)2 614571
FAX: ++390 (0)2 614 2576
AVX sro, Czech RepublicTel: ++420 (0)467 558340
FAX: ++420 (0)467 558345
A KYOCERA GROUP COMPANY
http://www.avxcorp.com
ASIA-PACIFIC
AVX/Kyocera, SingaporeAsia-Pacific Headquarters
Tel: (65) 258-2833FAX: (65) 350-4880
AVX/Kyocera, Hong KongTel: (852) 2-363-3303
FAX: (852) 2-765-8185
AVX/Kyocera, KoreaTel: (82) 2-785-6504
FAX: (82) 2-784-5411
AVX/Kyocera, TaiwanTel: (886) 2-2696-4636
FAX: (886) 2-2696-4237
AVX/Kyocera, ChinaTel: (86) 21-6249-0314-16FAX: (86) 21-6249-0313
AVX/Kyocera, MalaysiaTel: (60) 4-228-1190
FAX: (60) 4-228-1196
Elco, JapanTel: 045-943-2906/7FAX: 045-943-2910
Kyocera, Japan - AVXTel: (81) 75-604-3426
FAX: (81) 75-604-3425
Kyocera, Japan - KDPTel: (81) 75-604-3424
FAX: (81) 75-604-3425