Page 1
IN HONOR OF LARRY HENCH
A guided walk through Larry Hench’s monumental
discoveries
Maziar Montazerian1,* and Edgar D. Zanotto1,*
1Department of Materials Engineering (DEMa), Center for Research, Technology and Education in Vitreous Materials (CeRTEV),
Federal University of São Carlos (UFSCar), São Carlos, SP 13.565-905, Brazil
Received: 23 September 2016
Accepted: 16 January 2017
� Springer Science+Business
Media New York 2017
ABSTRACT
Here we review and summarize the groundbreaking scientific researches of the
late Professor Larry L. Hench, including several of his key discoveries in
materials science and engineering. First, we provide a statistical overview of his
exceptional scientific performance using Scopus, Web of Science, and other Web
sites to extract statistical data on his scientific publications and patents. Pro-
fessor Hench achieved an exceptionally high h-index of 77 (Scopus) for the field
of materials science and engineering, which resulted from his 340 research
papers, 210 conference papers, 41 patents, 24 books, 4 editorial notes, and 3
biographies starting in 1967. Then, we summarize and highlight his seminal
articles, books, and patents in several research areas, such as bioactive glasses,
optical gel glasses, biocomposites/coatings, glass–ceramics, biophotonics,
advanced ceramics, semiconducting and ionic conducting glasses, glass corro-
sion, and nuclear waste disposal. Prof. Hench not only discovered the first man-
made material to form a chemical bond with bone and initiated a whole new
field—bioactive glasses and glass–ceramics—but also made several other
important scientific discoveries. It is quite clear that he was one of the most
influential materials scientists/engineers of all time! We hope that this review is
not only useful for all persons interested in materials science and engineering
but also encourages students and younger investigators to make use of this
accumulated knowledge to design novel materials and discover new applica-
tions for glasses and ceramics.
Hench by the numbers
Hench’s publications have been indexed in the Web
of Science since 1967 [1]. He published an average of
12 articles per year [1]. He also wrote or edited
approximately one book every 2 years [2]. Professor
Hench’s h-index at Scopus is 77 [3], resulting from
the publication of approximately 340 research papers
[1], 210 conference papers [1], 41 patents [1], 24 books
[2], 20 review papers [1], 23 book chapters [3], 4
editorial notes [1], 2 letters [1], and 3 biographies [1],
which lead to a total of 25,753 citations until July
Address correspondence to E-mail: [email protected] ; [email protected]
DOI 10.1007/s10853-017-0804-4
J Mater Sci
In Honor of Larry Hench
Page 2
2016. Figure 1 shows his number of publications and
citations.
Hench performed research in the fields of materials
science and engineering, chemistry, biochemistry,
genetics, biology, physics, medicine, and dentistry.
The research subjects tackled and his publication
quantity in each subject are summarized in Fig. 2.
Hench’s scientific papers have been published in
several materials science and engineering journals
(Fig. 3). He was also a member of the editorial advi-
sory boards of some of them. His publications are
highly cited and are key references for engineers and
scientists of various interdisciplinary fields. Lists of
his books and highly cited papers are given in
Tables 1 and 2, respectively.
Our statistical analysis of Hench’s work and pub-
lications revealed that his main research subjects
were bioactive glasses, optical gel glasses, biocom-
posites/coatings, glass–ceramics, advanced ceramics,
semiconducting and ionic conducting glasses, glass
corrosion, and nuclear waste disposal. Therefore, in
this article, we highlight his main discoveries in these
areas.
Bioactive glasses (Refs. [32, 44, 50–238])
Without any doubt, the discovery in 1969 of the first
man-made biomaterial that could bond to living bone
and tissues was Hench’s most monumental discovery
3
15
16
21
23
29
34
36
37
45
82
217
0 40 80 120 160 200 240
Obituaries
Waste forms
Bioac�ve coa�ngs
Semi/ion-conduc�ng glasses
Bio-photonics
Glass-ceramics
Bio-composites
Review papers on biomaterials
Advanced ceramics
Glass corrosion and leaching
Op�cal gel-glasses
Bioac�ve glasses
Number of Publica�ons
Figure 2 Main research
subjects investigated by Hench
and the number of publications
in each, including
journal/conference papers and
patents [1].
0
6
12
18
24
30
36
42
0
300
600
900
1200
1500
1800
2100
Num
ber o
f Pub
lica�
ons
Cita
�ons
Year
Figure 1 Hench’s
publications and citations per
year [1, 3] until July 2016.
J Mater Sci
Page 3
[35]. In the summer of 1967, he had the good fortune
of talking to an army officer on a bus ride during his
return from a conference. They discussed the tragic
result during the Vietnam War of wounds to limbs of
soldiers that shattered only a portion of the limb but
required amputation of the entire limb because of the
3 3 3 3 3 4 5 6 7
9 9 10
12 12
22 42 43
58 78
0 10 20 30 40 50 60 70 80 90
ScienceJournal of the European Ceramic Society
Physics and Chemistry of GlassesJournal of the Electrochemical Society
Journal of Applied PhysicsMaterials Science Forum
Journal of Nuclear MaterialsCeramics Interna�onal
Nuclear and Chemical Waste ManagementBiomaterials Ar�ficial Organs and Tissue Engineering
Journal of Sol Gel Science and TechnologyJournal of Materials Science
Journal of Materials Science Materials in MedicineBiomaterials
Journal of the American Ceramic SocietyJournal of Non-Crystalline Solids
Key Engineering MaterialsJournal of Biomedical Materials Research (Part A & B)
American Ceramic Society Bulle�n
Number of Publica�ons
Figure 3 Hench’s quantity of
publications in 20 journals
[1, 3].
Table 1 Hench’s books [2]
No. Title Authors/editors Year Ref.
1 A biography of Bioglass L.L. Hench 2015 [4]
2 Boing–Boing the bionic cat and the Amazon Crisis L.L. Hench 2015 [5]
3 An introduction to bioceramics (2nd Edition) L.L. Hench 2013 [6]
4 Boing–Boing the bionic cat and the space station L.L. Hench 2011 [7]
5 Boing–Boing the bionic cat and the Mummy’s revenge L.L. Hench 2011 [8]
6 New materials and technologies for healthcare L.L. Hench, J.R. Jones, M.B. Fenn 2011 [9]
7 Biomaterials, artificial organs and tissue engineering L.L. Hench, J.R. Jones 2005 [10]
8 Boing–Boing the bionic cat and the flying trapeze L.L. Hench 2004 [11]
9 Boing–Boing the bionic cat and the lion’s claws L.L. Hench 2004 [12]
10 Future strategies for tissue & organ replacement J.M. Polak, L.L. Hench, P. Kemp 2002 [13]
11 Science, faith and ethics L.L. Hench 2002 [14]
12 Boing–Boing: the bionic cat and the jewel thief L.L. Hench 2001 [15]
13 Boing–Boing the Bionic cat L.L. Hench 2000 [16]
14 Sol–gel silica: properties, processing and technology transfer L.L. Hench 1998 [17]
15 Bioceramics, vol 8 J. Wilson, L.L. Hench, D. Greenspan 1995 [18]
16 Clinical performance of skeletal prostheses J. Wilson, L.L. Hench 1995 [19]
17 Chemical processing of advanced materials L.L. Hench and J.K. West 1992 [20]
18 CRC handbook of bioactive ceramics, vol I T. Yamamuro, L.L. Hench, J. Wilson 1990 [21]
19 CRC handbook of bioactive ceramics, vol II T. Yamamuro, L.L. Hench, J. Wilson 1990 [22]
20 Principles of electronic ceramics L.L. Hench, J.K. West 1990 [23]
21 Science of ceramic chemical processing L.L. Hench, D.R. Ulrich 1986 [24]
22 Ultrastructure processing of ceramics, glasses, and composites L.L. Hench, D.R. Ulrich 1984 [25]
23 Ceramic processing before firing L. L. Hench, G.Y. Onoda 1978 [26]
24 Bibliography on ceramics and glass L.L. Hench, B.A. McEldowney 1976 [27]
J Mater Sci
Page 4
lack of supporting/replacing material for bone.
Hench formulated a sodium–calcium–phosphorous–
silicate composition in which the ratio of Ca/P
mimics the stoichiometry of Ca/P in bone. He tried a
handful of compositions based on the SiO2–Na2O–
CaO phase diagram and came up with the 45SiO2–
24.5CaO–24.5Na2O–6P2O5 (wt%) glass composition,
known as 45S5 Bioglass�, proving its bone-bonding
ability. This invention opened up a whole new field—
‘‘bioactive glasses’’—in which the principal goal was
to develop, test, and use materials that bond to bone.
With careful studies, primary assistance from Drs.
Splinter, Greenlee, and Allen [32], who were ortho-
pedists, and shortly after with Drs. G. Miller, G.
Piotrowski, A.E. Clark, and D.C. Greenspan, and
support from the US Army Medical R&D Command,
Hench achieved this seminal discovery [35].
Bioactive glasses undergo a particular biological
reaction at the interface, which stimulates cell pro-
liferation, gene response and the formation of a bond
between living tissues and the material. A common
feature of bioactive glasses is that their surface
develops a biologically active hydroxycarbonate
apatite (HCA) layer that bonds to bone. The HCA
phase that forms on these glasses is chemically and
structurally equivalent to the mineral phase of bone
and teeth. This similarity is key for interfacial bond-
ing [35].
This discovery opened up a totally new interdis-
ciplinary area in materials science and engineering,
chemistry, biochemistry, medicine, dentistry and
biology. There are dozens of conferences and scien-
tific journals currently dealing with biomaterials; one
journal is specifically dedicated to Hench’s discovery,
Biomedical Glasses.
Hench and his students and colleagues managed to
license their inventions to companies that commer-
cialized the bioactive glass 45S5 Bioglass� for dental
and medical applications. Bioglass�-derived products
include Perioglas�, NovaBone�, and NovaMin�
Table 2 Hench’s most cited papers [3] until July 2016
No. Title Year Citations Ref.
1 Bioceramics: from concept to clinic 1991 3097 [28]
2 The sol–gel process 1990 2496 [29]
3 Bioceramics 1998 1976 [30]
4 Third-generation biomedical materials 2002 1344 [31]
5 Bonding mechanisms at the interface of ceramic prosthetic materials 1971 773 [32]
6 Gene-expression profiling of human osteoblasts following treatment with the ionic products of Bioglass�
45S5 dissolution
2001 652 [33]
7 Surface-active biomaterials 1984 629 [34]
8 The story of Bioglass� 2006 626 [35]
9 Ionic products of bioactive glass dissolution increase proliferation of human osteoblasts and induce insulin-
like growth factor II mRNA expression and protein synthesis
2000 499 [36]
10 Bioactive materials 1996 471 [37]
11 Biomaterials: a forecast for the future 1998 429 [38]
12 Direct chemical bond of bioactive glass ceramic materials to bone and muscle 1973 420 [39]
13 Bioglass� 45S5 stimulates osteoblast turnover and enhances bone formation in vitro: implications and
applications for bone tissue engineering
2000 397 [40]
14 Optimising bioactive glass scaffolds for bone tissue engineering 2006 333 [41]
15 An investigation of bioactive glass powders by sol–gel processing 1991 312 [42]
16 Highly bioactive P2O5–Na2O–CaO–SiO2 glass–ceramics 2001 284 [43]
17 Calcium phosphate formation on sol–gel-derived bioactive glasses in vitro 1994 253 [44]
18 Nodule formation and mineralisation of human primary osteoblasts cultured on a porous bioactive glass
scaffold
2004 248 [45]
19 Effect of crystallization on apatite-layer formation of bioactive glass 45S5 1996 244 [46]
20 Toxicology and biocompatibility of bioglasses 1981 228 [47]
21 Development and in vitro characterisation of novel bioresorbable and bioactive composite materials based
on polylactide foams and Bioglass� for tissue engineering applications
2002 228 [48]
22 Bioactive materials: the potential for tissue regeneration 1998 210 [49]
J Mater Sci
Page 5
(Fig. 4). These products and some cones of Bioglass�
were used clinically as ossicular reconstruction pros-
theses, endosseous ridge maintenance implants, bone
grafts to restore bone loss from periodontal disease in
infrabony defects, bone grafts in tooth extraction sites
and alveolar ridge augmentation, and orthopedic bone
grafting in general [35]. Now, Bioglass� is used as a
coarse particulate for bone grafting, fine particulate in
Sensodyne� toothpaste for dentinal hypersensitivity
treatment (NovaMin�), and as some custom implants.
There is a recent commercial use for Bioglass� as afiber
composite (Bio2 Technologies, Inc.), but the ossicular
replacement and endosseous implant apparently are
no longer in use [50].
Hench published more than 200 papers, book
chapters and patents specifically dealing with his
bioactive glass [1]. Forty-seven years after the intro-
duction of bioactive glasses, more than 5,000 publica-
tions describe in vitro, in vivo or clinical performance
of 45S5, other bioactive glasses and glass–ceramics [1].
Fortunately, during his lifetime, he reviewed the
history, processing, properties and applications of
bioactive glasses. He demonstrated a successful path
from a brand new concept to applications, which are
still wide open to future innovations. Hench came up
with the concept of the bone-bonding ability of certain
glasses. Then, hemanaged to apply this idea to clinical
applications and finally opened a new era of research
for gene-activating glasses [180, 214, 216–218, 222, 223].
The objective of this paper is not merely reviewing
Hench’s achievements in this field because his own
review papers are very comprehensive. What we
intend to accomplish here is to list and comment on
his key review papers (see Table 3) to guide and
encourage the interested reader in their study. For
example, in the highly cited paper ‘‘The story of
Bioglass�’’ [35], Hench describes the story of a sec-
ond-generation biomaterial, Bioglass�, as an exciting
alternative for the first-generation inert biomaterials.
The steps of discovery, characterization, in vitro and
in vivo evaluations, clinical studies, and product
development are elegantly summarized along with
the technology transfer processes [35]. Then, Hench
and Julia Polak [31] called attention to the gene-acti-
vating properties of bioactive glasses, which became
known as the third generation of biomaterials for
tissue regeneration and repair [31]. They established
the Tissue Engineering and Regenerative Medicine
Centre (TERM) at Imperial College London to pro-
mote collaboration between biologists and materials
scientists. Early works at their centre elucidated the
beneficial interactions between primary human
Figure 4 Bioactive glass products for a periodontal disease therapy (Perioglas�), b orthopedic bone grafting (NovaBone�) and
c particulates in toothpaste for dentinal hypersensitivity treatment (NovaMin�).
J Mater Sci
Page 6
osteoblasts and 45S5 Bioglass� (Fig. 5). Then, the
team discovered that the dissolution products of
bioactive glasses have osteoblastic stimulatory and
gene-activating properties. This extensive research on
bioactive glasses proved their suitability when
assembled as scaffolds for bone tissue engineering, as
they not only provide an osteoconductive and
osteoproductive substrate—which is due to ion
release from the glass—but also actively stimulate
cells to express appropriate osteoblastic phenotypes
[40]. Therefore, they came to the conclusion that ‘‘a
cellular and molecular basis for development of
third-generation biomaterials provides the scientific
foundation for molecular design of scaffolds for tis-
sue engineering and for in situ tissue regeneration
and repair, with minimally invasive surgery. Impor-
tant economic advantages to each of these new
approaches may aid in solving the problems of caring
for an aging population’’ [31].
Finally, Professor Hench inspired many scientists
with his famous phrase: ‘‘…avoid pursuing small
incremental advancements in this exciting field.
Instead, researchers should strive for unique and
innovative approaches at a fundamental molecular
biology level to create new bioactive materials and
test them in representative biological conditions that
mimic their use clinically. The goal must be to create
materials that are revolutionary and can improve the
quality of life and care for our aging population
without increasing the cost of care. This is a goal
worth striving for and a vision that will last for
decades’’ [223].
Larry Hench also introduced the first gel-derived
highly bioactive glasses in 1991. He and his Ph.D
students, Li and Pereira, in their highly cited papers
[42, 44] studied different compositions and per-
formed in vitro bioactivity tests in simulated body
fluid. Surprisingly, gel-derived glasses with nearly
Table 3 Hench’s seminal review papers on bioactive glasses
No. Title Year Refs.
1 Bioglass: 10 milestones from concept to commerce 2016 [222]
2 Opening paper 2015—some comments on Bioglass�: four eras of discovery and development 2015 [223]
3 Bioactive glasses beyond bone and teeth: emerging applications in contact with soft tissues 2015 [220]
4 Chronology of bioactive glass development and clinical applications 2013 [218]
5 Interactions between bioactive glass and collagen: a review and new perspectives 2013 [217]
6 Glass and medicine 2010 [216]
7 Genetic design of bioactive glass 2009 [214]
8 The story of Bioglass� 2006 [35]
9 Bioactive glasses for in situ tissue regeneration 2004 [180]
10 Third-generation biomedical materials 2002 [31]
Figure 5 a Scanning electron micrograph of a human primary
osteoblast cultured on a 45S5 Bioglass� disk for 2 days.
b Osteoblast in contact with 45S5 Bioglass� disk after 6 days in
culture. The osteoblast has assumed a more flattened morphology
and is anchored to the substrate by multiple lamellipodia. Modified
from Ref. [40], with permission from Springer.
J Mater Sci
Page 7
90 mol% SiO2 were found to be bioactive (the bioac-
tive melt-derived glasses generally have less than
55 mol% SiO2). The rate of surface hydroxycarbonate
apatite (HCA) formation was higher than in melt-
derived glasses of the same composition. This finding
suggested a promising chemistry-based method for
the molecular and textural design of new bioactive
glasses. The sol–gel method also made it possible to
control the size and distribution of mesopores and
macropores in ranges 2–50 nm and 100–500 lm,
respectively [120, 124]. In the early 2000s, bioactive
gel glass compositions were simplified by Saravana-
pavan and Hench to just two components (CaO and
SiO2). They showed that the gel-derived 70SiO2–
30CaO (in mol%) glass was as bioactive as the gel-
derived 58S (60SiO2–36CaO–4P2O5 in mol%) or melt-
derived 45S5 Bioglass� [145, 173, 190]. This CaO–SiO2
system was the basis for many of Hench’s studies on
tissue regeneration. Then, the performances of gel-
derived glasses were compared with melt-derived
ones by Sepulveda, Jones, and Hench [147, 158].
Meanwhile, bioactive gel glasses with silver in their
composition were also developed by Bellantone,
Coleman and Hench [142, 233]. These bioactive gel-
derived materials released silver ions at the parts per
million levels. The silver ions provided bacteriostatic
and bactericidal effects without damaging human
cells. Clinical applications in wound dressings were
then pursued [142, 233]. Finally, new gel-derived and
gene-activating bioactive glasses started to emerge.
Hench’s students and collaborators are still publish-
ing a series of papers documenting these develop-
ments. They are testing the use of sol–gel process to
produce bioactive particles, fibers, foams, porous
scaffolds, coatings, substrates, and net shape mono-
liths, which offer molecular control over the incor-
poration and biological behavior of proteins and cells
with broad applications as implants and biological
sensors [239]. The interested reader can follow vari-
ous advances and improvements in this exciting field
in the review papers authored by Jones [239],
Miguez-Pacheco et al. [221], Greenspan [240, 241],
Gentleman and Polak [242], and Woodard [243].
Optical gel glasses (Refs. [244–321])
Hench’s odyssey in the field of optical gel glasses
began 10 years after the introduction of Bioglass�
and ended with a commercial technology for
chemical processing of net shape optics. In 1979,
while visiting Professor Jerzy Zarzycki’s laboratory at
the University of Montpellier, France, Hench
observed a large (20 cm) rod of pure vitreous silica
made by sintering a hydrothermally processed xero-
gel. He was surprised to find a rod molded in its final
shape that was densified at a much lower tempera-
ture than the liquidus of pure SiO2. After returning to
the USA, he changed the focus of his laboratory from
glass surface chemistry to sol–gel processing of
glasses. His objective was to develop and commer-
cialize net shape glasses made by the sol–gel route. In
his long journey, Hench benefited from fruitful col-
laboration with and support of Dr. Donald Ulrich in
the US Air Force Office of Scientific Research
(AFOSR) [17].
Hench and his French collaborators pioneered a
particular low-temperature sol–gel process for the
rapid fabrication of large monolithic optical glasses
[17, 25, 29]. Until 1982, it was difficult to produce gel
monoliths rapidly and reliably at ambient conditions
because of the lack of control over the drying stage,
which led to cracking. Hench’s earliest studies
(1981–1984) were in collaboration between his group
(Drs. Wang and Orcel) and Professor Zarzycki’s
group (Drs. Prassas and Phalippou)
[244, 247, 255–259]. They included organic additives
(e.g., formamide (NH2CHO), glycerol (C3H8O3), and
several organic acids) in alkoxide sols to control the
rate of hydrolysis and condensation, pore size dis-
tribution, pore liquor vapor pressure, and drying
stresses. By use of proprietary drying control addi-
tives, a wide range of sizes and shapes of optically
transparent dried gel monoliths of SiO2, Na2O–SiO2,
TiO2–SiO2, LiO2–A12O3–SiO2–TiO2, and other ternary
and quaternary systems were made within a few
days at ambient atmosphere. Crack-free pieces of
dense (type V) or optically transparent nanoporous
(type VI) silica glasses were obtained after a unique
thermal stabilization or densification [29]. For exam-
ple, fully dense alkali-silicate glasses of (3–40)Na2O–
(60–97)SiO2 mol% were prepared at ambient pres-
sures from sol–gel compositions. The densification
temperatures ranged from 600 �C for high silica
glasses to 480 �C for glasses with 60–85 mol% silica
[17].
While the dense and net shape type V silica was
suggested for a variety of applications, such as opti-
cal windows, Hench’s impetus for developing a new
generation of nanoporous gel–silica matrices was the
J Mater Sci
Page 8
need for a material suited for surface laser densifi-
cation of optical channel waveguides, as well as for
the impregnation of optically active organic mole-
cules. In the following years, he managed to suc-
cessfully develop micro-lenses with a homogeneous
refractive index over a large zone by selective laser
densification of gel–silica substrates containing
nanosized pores (3.2–4.5 nm). Additionally, impreg-
nation of nanoporous (4.5–9 nm) gel–silica matrices
with optically active organic molecules provided one
alternative to the production of optical composites.
Figure 6 shows the products developed by Hench for
the above applications [261, 269, 287].
In his numerous reviews on this particular subject
[261, 263, 269, 277, 287], Hench suggested the process
control variables for gel–silica optics and utilized
advanced analysis methods to show us how and why
the thermal-chemical processing works at a molecu-
lar level. Furthermore, his and J.K. West’s studies on
quantum molecular orbital (MO) modelling yielded
significant insight into the understanding of struc-
ture–property relationships for bulk amorphous sil-
ica, as well as for porous type VI gel–silica. The same
MO methods were applied by Hench and co-workers
to a variety of topics: quantum clusters of Si–SiO2,
silica densification, silica–water interactions, silica
pore models, Cr3?-doped silica, silica fracture, bio-
logical interactions of Bioglass�, and biomimetic
synthesis [102, 104, 107, 113, 119, 289, 294–296,
302–304].
The applications of the new generation of silica
optics that resulted from Hench’s investigations were
copious, such as net shape transmissive optical
elements, surface diffractive optics, inorganic doped
GRIN (gradient refractive index) optics, organic
impregnated optical hybrids such as dye lasers and
scintillators, optics with internal diffraction gratings,
laser-densified micro-optical lenses and arrays, and
laser-densified waveguides [287]. Geltech Inc., run by
his former student, Jean-Luc Nogues, was acquired
by Lightpath Technologies in the early 1990s and
produced near-net-shape optical gel glasses. Hench
summarized 15 years of sol–gel processing research
and hundreds of papers that led to the successful
commercial development of gel–silica optics in his
book titled ‘‘Sol–gel silica: properties, processing and
technology transfer’’ [17]. This book describes the key
experiments in optimizing the processing stages
involved in making stable gel-derived optical glasses
[17].
Biocomposites and coatings (Refs.[322–372])
The low fracture toughness and strength of bioactive
glasses limited their applications to low load-bearing
implants. In 1973, Hench envisaged the development
of composites for improving mechanical properties
[322]. First, Greenspan and Hench reported the first
use of Al2O3 particles to reinforce Bioglass� [323].
However, this approach did not work and led to the
first Bioglass� related patent, ‘‘Bioglass�-coated
Al2O3 ceramics’’ [370]. This coating was technically
successful but never commercialized. Then, Duch-
eyne and Hench introduced stainless steel fibers into
Figure 6 a Net shape, type V
gel glass optical windows,
b optically transparent
nanoporous type VI gel–silica
Reproduced from Ref. [269],
with permission from Elsevier.
J Mater Sci
Page 9
Bioglass� by immersion of premade porous fiber
skeletons into molten glass [324]. Metal fiber rein-
forcement effectively transformed bioactive glass into
a structurally reliable material. Both strength and
toughness were higher than the properties of the
parent glass [324]. The in vivo bone-bonding ability
of the Bioglass�–stainless steel composite was
promising, and it could be deformed, subjected to
tensile stresses, machined, survived from impact
loading and, finally, presented the possibility of
preventing bacterial ingress due to its direct chemical
bonding to surrounding tissues [325]. These positive
results led to a patent registration [352].
Furthermore, Hench and his collaborators exten-
sively worked on biopolymer/Bioglass� composites.
The objective was to either reinforce/coat biopoly-
mers or trigger specific biological responses in poly-
meric bone grafts, scaffolds or cell culture plates.
They employed polysulfone [327, 349, 351], poly-
ethylene [328], polysaccharide [331], dextran [332],
polylactide [48, 335], various polymer fibers woven or
knitted into 3D patterns [333, 334, 340] and poly(dl-
lactic acid) [337, 338, 350]. As an example, an opti-
mized processing technique for the fabrication of
composites formed by polyglactin polydioxanone 3D
mesh (Ethisorb�) and Bioglass� particles has been
developed by Stamboulis et al. [333]. The procedure
was based on a powder-pressing technique [330] or
the immersion of 3D polymeric mesh into the Bio-
glass� slurry [333]. The controlled formation and
homogeneous structure and thickness of the bioactive
glass coating on the biodegradable polymer substrate
led to tailoring of the desired degradation times and
biocompatibility needed for a resorbable bioactive
tissue engineering scaffold [333]. Data on the bio-
logical response of similar composites, using resorb-
able sutures as the polymeric component, confirmed
that the bioactive glass layer could be used to control
the rate and extent of degradation of the polymers
[334]. Furthermore, the addition of medium molecu-
lar weight dextran (a complex branched glucan)
modified the glass particulate to a putty consistency
and improved the handling characteristics for use in
augmenting certain bony surfaces, i.e., large or
pleomorphic defects [332, 336]. The addition of dex-
tran did not change the bioactive properties of Bio-
glass� and had no unfavorable effects on the
ingrowth of bone into the defect sites. This composite
was patented for eventual applications [354, 356].
Bone bridges, lacy calcification and osteoblastic
activity without any histological evidence of tissue
toxicity were seen after 1 week of in vivo interaction
of Bioglass�/dextran composite with bone (Fig. 7a).
At 3 weeks, bone with an emerging trabecular pat-
tern enclosing Bioglass� particles extended across the
defects (Fig. 7b). At 6 and 12 weeks, bone remod-
elling continued and only fragments of Bioglass�
remained (Fig. 7c).
In addition to the conventional development of
Bioglass�/polymer composites, a more promising
and advanced approach that was further pursued by
his collaborators—Boccaccini, Jones, Brennan,
Figure 7 Bioglass�/dextran composite filling a rabbit bone defect
in the knee joint: a after 1 week, b after 6 weeks and c after
12 weeks. The circles show the position of the bone defect where
tested materials were placed. Samples stained with Sandersons and
Van Gieson, and magnification is 910 [332].
J Mater Sci
Page 10
Pereira, Kasuga, Nazhat, Orefice, Roether, Maeda
and Gough—was to design inorganic–organic
hybrids [335, 341, 343–347]. They could form an
inorganic network of bioactive glass around
biopolymer molecules through a sol–gel process. This
resulted in molecular-level interactions of glass con-
stituents with organic compounds. These molecular-
scale interactions between the glass and polymer
components led to controlled bioactivity and the
potential to improve mechanical properties. This
open and interesting field is still followed by Hench’s
collaborators and has been thoroughly reviewed by
one of them, Jones [239].
Another approach followed by Hench to solve the
mechanical limitations of bioactive glasses and
ceramics for load-bearing applications was to apply
bioactive glasses, e.g., Bioglass�, as a coating on a
mechanically tough substrate [357–372]. Stainless
steel, cobalt–chromium, titanium alloys, and alumina
implants were commonly used as substrates. Various
techniques were utilized to deposit bioactive glass
coatings on metal implants, including plasma or
flame spraying, frit enamelling, electrophoretic
deposition and sol–gel deposition [357–372]. Details
of the development of bioactive glass coatings on
various implants are given by Hench in the first
edition of his book ‘‘An Introduction to Bioceramics’’
[6] and references [357–367]. Hench also performed
in vivo tests and registered several patents for his
novel coatings [368–372]. However, clinical applica-
tions have not been successful for the two following
main reasons: (1) The open structure of glass facili-
tates the diffusion of elements, such as Fe, Cr, Ni, Co,
Ti, or Al, to pass through the glass and change the
surface reactivity. Only a few percent of these ele-
ments is enough to make a glass non-bioactive and
stop the formation of HCA. See Ref. [82] for a review
of these compositional factors. (2) Difficulty in
achieving long-term stability of the glass–implant
interface, even though the glass is bonded to bone,
was another main drawback [6]. Therefore, to the best
of our knowledge, these inventions have not reached
the market yet.
Glass–ceramics (Refs. [373–402])
Hench’s studies on glass crystallization date back to
his M.Sc. thesis, which was supported by Owens-
Illinois Co. His proposal for the O-I fellowship was to
study the molecular mechanisms involved in the
formation of the crystalline phases in glass–ceramics
[35]. He investigated the use of dielectric relaxation
spectroscopy to follow changes in the dielectric losses
of mobile Li? cations in lithium disilicate glasses that
became much more immobile when they were
incorporated into Li2Si2O5 crystals [373–376]. Later,
under the supervision of Hench, Donald Kinser and
Stephen Freiman focused on the crystallization
kinetics and electrical and mechanical properties of
model lithium disilicate (Li2O–2SiO2) glass–ceramics.
The series of papers resulting from their Ph.D dis-
sertations provided insight for further investigations
[373–390]. Additionally, Hench was one of the first
scientists who used advanced analysis methods, such
as small angle X-ray scattering (SAXS) [385], trans-
mission electron microscopy (TEM) [388], Auger
electron spectroscopy (AES) [392], and Fourier
transform infrared spectroscopy (FTIR) [397], in the
field of glass science and technology.
In the mid-1990s, a new milestone in his research
was started with his Brazilian collaborators. In that
time, a great challenge was the development of a new
material that could combine both the high bioactivity
of Hench’s Bioglass� and the better fracture strength
and strength of some bioactive glass–ceramics, such
as Ceravital� (apatite-based glass–ceramic) and Cer-
abone� (apatite–wollastonite glass–ceramic)
[398, 399]. A straightforward strategy to achieve this
goal was via controlled crystallization of Bioglass�.
However, at that stage, the bioactive glass commu-
nity was assuming that crystallization of any glass
would impair bioactivity. Therefore, Hench and his
collaborators tried to answer two questions: (1) does
crystallization really impair bioactivity? (2) Can
crystallization of such bioactive glasses significantly
improve their mechanical properties?
Under the supervision of Larry Hench and Edgar
Zanotto, Oscar Peitl carried out his Ph.D thesis and
published two groundbreaking reports [43, 46]
demonstrating that crystallization of Bioglass�
slightly decreased the kinetics of HCA formation but
did not inhibit its formation, even in the case of full
crystallization. They demonstrated the in vitro
bioactivity of glass–ceramics with different compo-
sitions, e.g., 23.75Na2O–23.75CaO–48.5SiO2–4P2O5
(wt%), and crystallized fractions [43]. The result was
similar: crystallization did not hinder HCA formation
for glasses of this system. Later, they showed that
controlled crystallization of glasses of this system
J Mater Sci
Page 11
could increase their average four-point bending
strength from 75 to 210 MPa [401]. This value is
similar to that of Cerabone� (215 MPa). The elastic
modulus also underwent a small increase, from 60 to
80 GPa, but it is still the closest value to that of
human cortical bone (*20 GPa) among the com-
mercial bioactive glass–ceramics. In addition, the
fracture toughness increased by 60% due to a crack
deflection mechanism. A patent was granted to
Hench, Peitl and Zanotto’s invention, and they called
this new material Biosilicate� [403]. They claimed the
use of this glass–ceramic in dentistry and orthopedics
[400]. Biosilicate� was found to exhibit fair machin-
ability because it is relatively easy to cut and drill,
which is an important feature that allows the fabri-
cation of implants with different shapes for specific
purposes. Before testing the effectiveness of Biosili-
cate� in clinical trials, Zanotto’s group in Brazil per-
formed a series of in vitro and in vivo studies, which
have been described elsewhere [398, 403]. Biosilicate�
is being clinically tested in dentistry for dentinal
hypersensitivity treatment, in ophthalmology as
orbital implants and in otorhinolaryngology as mid-
dle-ear ossicle implants [403]. Figure 8 shows pieces
of Biosilicate� for ossicular replacement. Otosilicate�
(the name given to these special shapes of monolithic
Biosilicate� pieces) prosthesis is an effective sub-
stituent for ossicles, not only for its biological prop-
erties but also for its machinability [403].
Furthermore, Chen et al. [404] developed three-di-
mensional (3D), highly porous, mechanically com-
petent, bioactive, and biodegradable scaffolds by the
replication technique using Bioglass� powder. Their
important finding, which confirmed the Hench,
Zanotto, and Peitl’s results [400, 401], was that the
mechanically strong crystalline phase Na2Ca2Si3O9
can transform into an amorphous calcium phosphate
phase after immersion in simulated body fluid for
28 days, and that the transformation kinetics can be
tailored through controlling the crystallinity of the
sintered 45S5 Bioglass�. Therefore, the goal of
developing a scaffold that provides good mechanical
support temporarily while maintaining bioactivity
and that biodegrades at later stages at a tailorable rate
was achieved with their Bioglass�-based scaffolds
[404].
Biophotonics (Refs. [405–428])
There has been an increasing need for noninvasive
methods to monitor living cells in vitro, the growth of
engineered artificial tissues, and the development of
cell-based biosensors. On all of these matters, Hench
and collaborators successfully integrated Raman
spectroscopy into their studies on tissue regeneration.
They published approximately 25 papers to show the
potential of biophotonic techniques based on Raman
spectroscopy to study biomaterials and cells
[405–427]. Raman spectroscopy is an optical tech-
nique based on inelastic scattering of laser photons
by molecular vibrations, which provides a chemical
fingerprint of biomaterials and cells/organelles
without fixation, lysis or the use of labels, and other
contrast-enhancing chemicals [405–427]. Hench et al.
have employed this technique in situ and in real-time
to follow up HCA formation on biomaterials and
characterize different living and dead cells (e.g.,
osteoblasts, lung cells and stem cells) attached on
them [410, 412]. They elicited Raman signals from
living cells, e.g., for detecting changes in cell pheno-
type, involving irradiating the cell with laser light at
Fig. 8 Biosilicate� prosthesis (Otosilicate) [403].
J Mater Sci
Page 12
selected wavelengths [427]. They also managed to
show that this spectroscopic method could be used to
study the most important cellular functions involved
in cell–biomaterial interactions, such as cell death,
differentiation, de-differentiation, and mineraliza-
tion. The method offers the potential for studying
cell–bioceramic interactions and reduces the need for
animal testing until the final steps of proving use-
fulness prior to clinical trials [421].
Currently, biophotonics is central to the cancer
studies conducted by Hench’s former students,
Michael Fenn at the Florida Institute of Technology
and Ioan Notingher at the University of Nottingham.
Interested readers can refer to Notingher and Hench’s
highly cited review paper [423] and Fenn et al. [428],
which cover the applications of this technique and
emphasize its potential impact on modern scientific
endeavors, such as tissue engineering, cancer identi-
fication, and drug discovery. They believe that Raman
spectroscopy has the potential not only to improve the
diagnosis of cancer but also to move forward the
treatment of some cancer types [423, 428].
Advanced ceramics (Refs. [429–464])
Thefirst researchproject thatHenchwas involved in as
an engineer intern was related to the chemical vapor
deposition of Al2O3 on UO2 fuel tubes applicable in
nuclear jet engine [35]. Then, as a fresh ceramic engi-
neer, Hench worked at the Lawrence Livermore Lab-
oratory in California to determine the effect of
chemical additives on the sintering of beryllium oxide
(BeO) to be used as the neutron moderator in the
nuclear rocket engine. His first paper on this topic was
presented at the annual meeting of the American
Ceramic Society in 1962 [35]. Then, he worked on sin-
tering and reactions of MgO and Cr2O3 to obtain his
Ph.D degree from Ohio State University in 1964 [429].
At that time, itwasbelieved that anyoxide additive of a
higher or lower valencemetal would enhance the rates
of densification by increasing the concentration of
vacancies, which in turn would enhance diffusion and
sintering. However, the sintering of MgO with the
addition of Cr2O3 was an exception and pressed sam-
ples did not densify. Hench and Russell [429] con-
cluded that when Cr2O3 is heated in air, it reacts with
O2 to form CrO3, which has a high vapor pressure,
evaporates to coat the MgO grains, reacts to form a
spinel (Mg2Cr2O4) that coats the MgO grain
boundaries, and stops diffusion and sintering. Proving
this explanation became Hench’s dissertation [429].
This was the beginning of Hench’s interest in sintering
process and advanced ceramics. Then, he worked on
various aspects of processing and the properties of
Si3N4, Al2O3, and SiC.
Hench and his group performed in-depth work on
sintering and characterization of Si3N4 in the early
1980s, e.g., [439–443]. They utilized Y2O3, MgO, and
ZrO2 additives to improve the sinterability and
properties of Si3N4. Grain boundaries and the role of
the glass phase formation were also investigated by
advanced analysis methods during that time
[439–443]. Wu, Du, Choy, and Hench successfully
densified Al2O3 and TiO2 by laser [451–454]. They
applied powder beds of alumina or titanium dioxide
by aerosol-assisted spray deposition and subse-
quently performed selective laser sintering. Their
studies aimed to understand the effects of laser pro-
cessing parameters on the microstructural evolution
of laser-densified ceramic powder beds and to opti-
mize the laser parameters for laser fabrication
[451–454]. Lee and Hench [446–448] demonstrated
one of the first uses of the sol–gel method to develop
homogenous mixed oxide/non-oxide advanced
composites such as SiC/SiO2, SiC/Al2O3, and SiC/
TiC at low temperatures. Finally, Hench’s book
‘‘Ceramic Processing before Firing’’ has long been
used as a textbook in many countries [26].
Hench and his colleagues also suggested advanced
metallic and ceramic neural stimulating electrodes
[460–464]. They designed appropriate in vitro and
in vivo tests and verified corrosion responses and
physiological/histological properties. These electrodes,
which are implanted in the body, are used to provide
functional neuromuscular control of some organs such
as the bladder, heart, limb, and the respiratory system
[460–464]. For example, they developed electrochemi-
cally anodized tantalum (Ta) capacitive electrodes for
neural stimulation [462]. It was shown through in vitro
studies and preliminary animal experiments that such
electrodes have great promise [462].
Semiconducting and ionic conductingglasses (Refs. [465–485])
Before immersing himself into the realm of bioma-
terials, Hench had his first US Department of Defense
funded project in 1966 as part of a larger
J Mater Sci
Page 13
multidisciplinary research program on ‘‘Unconven-
tional Semiconductors’’ [35]. He was interested at the
time in investigating the electronic behavior of
vanadium phosphate (V2O5–P2O5) glasses [465, 466].
He demonstrated that these amorphous semicon-
ductors have high electronic conductivity and resist
radiation damage, especially when heat-treated to
induce small ordered regions [467, 468]. This finding
indicated that these new materials might be useable
as electrical switches in satellites, which would need
to survive high doses of high-energy radiation pro-
duced by, e.g., solar flares or certain types of weap-
ons [465–471]. Hench also collaborated in Tehrani’s
Ph.D thesis related to SiC-based semiconductors
[473–477]. Tehrani later became successful and made
a key contribution to the development of magne-
toresistive random access memory (MRAM)
technology.
Hench started a long-time collaboration
(1982–2006) with his Japanese colleague, Yoshihiro
Abe [472, 478–484]. In the early 1980s, the electrical
charge carriers in alkali-free and transition metal-free
oxide glasses were uncertain. Hench and Abe tried to
resolve this ambiguity. They first obtained DC elec-
trical conductivity data for MO�P2O5 glasses
(M = Be, Mg, Ca, Sr, Ba) containing small amounts of
water. Their results suggested that the mobility of
protons (H?) in the glasses increases with decreasing
O–H bonding strength [472]. The relation between
the proton concentration and the conductivity or the
apparent activation energy was studied for calcium
metaphosphate glasses containing various amounts
of water. The conductivity was found to be propor-
tional to the square of the proton concentration [472].
Then, they proved that electrical charge carriers in
lead silicate glasses (with PbO between 30 and
65 mol%) are protons rather than Pb2? by using
quantitative relations between electrical conductivity,
activation energy and the O–H bonding state
[478, 479]. They determined the nature of the elec-
trical charge carriers in oxide glasses containing nei-
ther alkali ions nor transition metal ions, for example,
PbO–SiO2, BaO–SiO2, CaO–SiO2, BaO–P2O5, CaO–
P2O5, glasses. The main charge carrier was protons
(H?) [478–481]. Their fundamental researches finally
led to the development of fast proton-conducting
glassy plates or films having room-temperature con-
ductivities of approximately 10-2 S/cm from the
alkali-free glassy zirconium phosphate synthesized
via sol–gel [482]. The solid amorphous superprotonic
conductors were reported to be chemically stable and
non-hygroscopic in ambient atmosphere even though
they contained molecular water in the structure [482].
The zirconium phosphate gel glasses were suggested
for use as a solid electrolyte in hydrogen cells,
hydrogen gas sensors, and humidity sensors [482].
Finally, they proposed new BaO–La2O3–Al2O3–P2O5
glasses exhibiting high proton conductivities of
10-2 S/cm at 200 �C and 10-3 S/cm at 25 �C with a
low activation energy of 0.17 eV [483]. Figure 9
shows plots of protonic conductivity versus temper-
ature for various compositions of glasses obtained by
Abe et al. [483]. Their findings were useful in devel-
oping H?-conductive glasses as a solid electrolyte
separator in H2–O2 fuel cells. The fuel cell using this
superprotonic glass electrolyte is operable at tem-
peratures from 25 to 200 �C even under non-humid-
ified conditions. To summarize, the protons in oxide
glasses had long been considered to be almost
immobile. However, Hench, Abe and their colleagues
demonstrated that H? is a major charge carrier and
introduced the above cited superprotonic conductors
Figure 9 Protonic conductivity versus 1/T plots for the glasses
obtained by Abe et al. (in ambient atmosphere, Au-electrode, at
10 kHz). Sample 1 22BaO–2.5La2O3–0.5Al2O3–75P2O5 (700 �C).Sample 2 5SrO–15BaO–10PbO–1Al2O3–69P2O5 (600 �C). Sam-
ple 3 6SrO–18BaO–12PbO–64P2O5 (600 �C). Sample 4 12SrO–
12BaO–12PbO–64P2O5 (700 �C). Sample 5 18SrO–6BaO–
12PbO–64P2O5 (800 �C). Glasses (in mole ratio) were prepared
by heating a mixture of raw materials, such as H3PO4 and metal
carbonates, at the listed temperatures for 30 min and subsequently
quenching [483].
J Mater Sci
Page 14
of phosphate glasses or even modified gypsum
(CaSO4�2H2O) [484] as good candidates for workable
electrolytes of fuel cells.
Glass corrosion and nuclear waste disposal(Refs. [485–545])
In the 1960s, many problems required an under-
standing of glass surface and corrosion. For example,
the stability of glass containers and windows had not
been fully recognized; leaching of nuclear waste
encapsulants was a problem; preservation of glass
antiquities was requested; reliability of fiber optic
interfaces was of great importance; and environ-
mental sensitivity in fracture mechanics was contro-
versial [509]. Therefore, Hench, in his early years at
the University of Florida, together with Sanders,
Person, Clark and Pantano utilized new methods,
e.g., electron microprobe analysis, infrared reflection
spectroscopy, atomic emission spectroscopy, and
Auger spectroscopy, to study glass surface and cor-
rosion [485–498]. Application of these surface analy-
sis instruments was established through a systematic
exploration of a series of glass compositions (mostly
silicate/alkali-silicate glasses) and environments.
Based on their investigations, it became possible to
describe in quantitative detail the surface and bulk
structural state of glassy objects independent of their
processing or environmental history. Characteriza-
tion of glassy objects, e.g., relating composition,
structure, and surface to properties, became possible
because extrinsic processing and environmental
variables could be described in terms of intrinsic
structural features [499–508]. Then, Hench elaborated
on several important glass surface topics that inclu-
ded corrosion mechanisms, the mixed-alkali effect,
surface passivation with solution ions, protective film
formation, the role of CaO, R2O/SiO2, and Al2O3 in
glass corrosion, glass surface area-to-solution volume
ratio, relevance of autoclave procedures in durability
tests, effects of the environment on silica fracture, and
the Bioglass�–bone bonding mechanism [509–529].
These studies provided the fundamental knowledge
that allowed Hench, for example, to propose his well-
known mechanism of bioactivity, which starts with
selective leaching of alkali ions and subsequent silica
gel formation [507].
Hench’s extensive knowledge on glass leaching and
corrosion led to his appointment to coordinate the
Nuclear Regulatory Commission Committee on the
Disposal of Reprocessed High Level Nuclear Wastes.
Hench conducted a number of collaborative research
projects with Belgium, Canada, France, Japan, Swe-
den, Switzerland, the USA, and Germany to test the
relative surface reactions of nuclear waste glasses
(borosilicate glasses) under a wide variety of simu-
lated repository conditions [543]. Nearly 2000 inter-
active interfaces were tested in salt in the Waste
Isolation Pilot Plant site in the United States [531–536].
Other studies included 1-, 3-, 6-, 12-, 24-, and 32-month
deep burial in granite boreholes in the Stripa mine in
Sweden at 90 and 100 �C [537–540]. Several glasses
were also evaluated in limestone for up to 2 years in
the UK [545]. Comparisons of the simulated burial
conditions with glasses containing radioactivity close
to that expected for commercial operations such as
LaHague, France, were made by a Japan–Sweden–
Switzerland consortium with collaboration from the
Commissariat a l’EnergieAtomique,Marcoule and the
Hahn Meitner Institute, Berlin [541–544]. These stud-
ieswere leading toward an international agreement on
the acceptable performance of high-level glassy waste
forms including borosilicate glasses [544]. These
results were challenged by researchers offering crys-
talline materials and concrete waste forms. However,
borosilicate glasswaste forms offered the advantage of
being simpler and demonstrated full-scale and
radioactive remote processing operations [544].
Therefore, Hench’s results and investigations were
supported by the French, who vitrify their nuclear
wastes to this day, and in the USA by PeteMacedo and
his research group at the Catholic University of
America who commercialized a glass encapsulation
program used at several nuclear waste reprocessing
centers, including West Valley, Savannah River and
Hanford [531–545].
Review papers on biomaterials (Refs.[546–582])
Hench wrote more than 30 review papers to elaborate
on his ideas on the history, trends, perspective and
ethical issues of biomaterials and bioceramics. This
valuable collection of papers can be considered a
guide for eventual research and development down a
road that Larry Hench paved for us. We summarize
his flourishing path and inspiring outlooks over the
past 30 years in the following lines.
J Mater Sci
Page 15
• 1975 Hench improved design criteria and the full
use of bioactive materials. It was apparent to him
that the molecular materials engineering
approach was nearly ready for use in developing
new bioactive biomaterials [546].
• 1979 He recommended that future biomaterials
research and development should focus on
improving reliability and emphasized three areas
of research and development: (1) studies of
composite biomaterials; (2) investigating mecha-
nisms of long-term interfacial reactions; (3) devel-
oping long-term predictive relationships of
biomaterial reliability [547].
• 1980 New composites were developed by Hench
et al. New techniques for characterizing biomate-
rials and their interfaces were also proposed.
These methods became available for predicting
the service lives of materials and prostheses. He
believed that the use of these new materials/
methods should provide better prostheses in the
decade ahead [548].
• 1989 A ‘‘Bioactive Substrate Theory’’ of the origin
of life was elucidated by Hench. The purpose of
the bioactive substrates was considered to activate
the irreversible ordering of macromolecules into
replicative structures. The implications of this
theory on the biochemical design of implants and
the prevention of disease states in modern man
were highlighted by Hench [549].
• 1993 Hench believed that the molecular-based
pharmaceutical approach to the design of bioce-
ramics should couple with the growth of genetic
engineering, sensor technology, and information
processing, resulting in a range of products and
applications not even imagined in the 1980s [551].
• 1996 In his intriguing paper titled ‘‘Life and death:
the ultimate phase transformation’’, he encourages
us to deeply understand the mechanisms under-
lying the mystery of the order (life) $ disorder
(death) transformation similar to glass $ crystal,
which may offer hope for developing new mate-
rials and prolonging the quality of life [555].
• 1999 Hench encouraged the community to have a
vision that synthetic materials may help slow
down, or ideally even reverse, the deterioration
that comes from old age [559].
• 2000 He was expecting to develop a material that
activates the body’s own repair mechanisms,
which is now close to reality. This was a major
shift from replacement of tissues to a new concept
of regeneration of tissues in the new millennium
[561].
• 2005 Assumed that designing a new generation of
gene-activating biomaterials tailored for specific
patients and diseases is possible and feasible.
Now, bioactive stimuli are useful for activating
genes in preventative treatment to maintain the
health of aging tissues [572].
• 2011 Asked for ever more creative and basic
studies on novel glasses and glass–ceramics to
cope with the problems of a world that has finite
resources but infinite desires [577].
• 2015Always believed that there is a great potential
for bioactive ceramics, glasses and glass–ceramics
Figure 10 Sketch of Oscar Peitl’s Ph.D research plan made by
Larry during a discussion with E.D. Zanotto in a bar in Sao Carlos,
SP, Brazil, in 1993. His main goal at that time was to increase the
mechanical properties of Bioglass� 45S5 through controlled
internal crystallization without impairing bioactivity.
J Mater Sci
Page 16
to achieve a goal of improved healthcare with
reduced costs. In one of his last papers, he could,
fortunately, suggest several major changes in the
field: ‘‘(1) more research and product development
directed toward specific clinical needs of an aging
population, (2) expanded emphasis on areas of
tissue repair other than bone and teeth, and (3)
more concentration on understanding molecular
biology and genetic-based mechanisms of tissue
regeneration and repair’’ [579].
Hench’s editorial note on ‘‘Researchers on research’’
has been a guideline for students and young investi-
gators to start their research work endeavor [580]. He
was an engineer who succeeded in transferring the
results of his basic researches to many candidate
technologies. Then, he and Pennypacker called our
attention to ‘‘making behavioral technology transfer-
able’’ [581]. In their paper, they outlined the process as
it evolved in materials engineering and illustrated its
applicability to behavioral analysis and technology
transfer. They encouraged others to broaden their
efforts in the discipline of behavior analysis in order to
finally fulfill its promise of benefit to the species, as for
sustainable biomaterials and waste disposal tech-
nologies [581]. Finally, ‘‘The bionic Kreidl’’ is a fiction
story written by Hench and Wilson in 1985. However,
many of the applications they envisaged therein were
eventually realized [582].
Concluding remarks
One of us (EDZ) had the fortune of working with
Larry for approximately 20 years. Figure 10 shows
the sketch of Oscar Peitl’s Ph.D research plan made
by Larry in a bar in Sao Carlos, SP, Brazil, in 1993. We
co-authored only two papers [43, 401], one book
chapter [6], and one patent [231], and co-advised the
Ph.D thesis of Oscar Peitl (Federal University of Sao
Carlos, Brazil, and University of Florida, USA).
However, Larry’s legacy on our research group
(www.certev.ufscar.br) was phenomenal: approxi-
mately 30 theses were defended, 44 studies on
bioactive glasses and glass–ceramics were published
[398, 403], 5 patents were registered, and 2 spin-off
companies were born, which collectively received 4
international awards.
Hench was a very clever, knowledgeable, and
enthusiastic person with a charming personality that
fostered collaborations with several hundred stu-
dents and researchers from all of the continents of
this planet. Hench’s success as a teacher/engi-
neer/scientist/colleague is well known. Many of his
students and collaborators are now leading their own
team or are respected professors and researchers in
major universities. We named some of them in this
paper. However, many others have been directly or
indirectly inspired by Hench. Interested readers are
invited to read the great tributes and obituaries that
have been written in his memory [583–585], as the
ones he wrote for David Kingery [586–588].
Prof. Hench not only initiated the field of bioactive
glasses and glass–ceramics but also made several
other important scientific discoveries, such as large
monolithic optical grade silica. It is quite clear that
Larry was one of the most influential materials sci-
entists/engineers of all time! We hope that this
review article is useful as a guide to forthcoming
articles and additionally motivates and encourages
students and younger investigators to dig deeper and
study his prominent publications to design novel
materials and discover new applications. Thank you
Larry for your most useful, enlightening guidance;
the whole ‘‘glass’’ and ‘‘biomaterials’’ communities
will surely miss you!
Acknowledgements
The authors are grateful to the Sao Paulo Research
Foundation—FAPESP, # 2013/07793-6—for the finan-
cial support of this work and for granting a post-
doctoral fellowship to Maziar Montazerian (#
2015/13314-9).
References
[1] http://www.thomsonreuters.com/WebOfScience
[2] http://www.amazon.com
[3] https://www.scopus.com/authid/detail.uri?origin=resultslis
t&authorId=7102398170&zone
[4] Hench LL (2015) A biography of Bioglass. Imperial Col-
lege Press, London
[5] Hench LL (2015) Boing-Boing the bionic cat and the
Amazon Crisis. Can of Worms Kids Press, London
[6] Hench LL (ed) (2013) An introduction to bioceramics, 2nd
edn. Imperial College Press, London
[7] Hench LL (2011) Boing-Boing the bionic cat and the space
station. Can of Worms Kids Press, London
J Mater Sci
Page 17
[8] Hench LL (2011) Boing-Boing the bionic cat and the
Mummy’s revenge. Can of Worms Kids Press, London
[9] Hench LL, Jones JR, Fenn MB (eds) (2011) New materials
and technologies for healthcare. Imperial College Press,
London
[10] Hench LL, Jones JR (eds) (2005) Biomaterials, artificial
organs and tissue engineering. CRC Press, Boca Raton
[11] Hench LL (2004) Boing-Boing the bionic cat and the flying
trapeze. Can of Worms Kids Press, London
[12] Hench LL (2004) Boing-Boing the bionic cat and the lion’s
claws. Can of Worms Kids Press, London
[13] Polak JM,Hench LL,KempP (eds) (2002) Future strategies for
tissue & organ replacement. Imperial College Press, London
[14] Hench LL (2002) Science, faith and ethics. Imperial Col-
lege Press, London
[15] Hench LL (2001) Boing-Boing the bionic cat and the jewel
thief. Can of Worms Kids Press, London
[16] Hench LL (2000) Boing-Boing the bionic cat. Can of
Worms Kids Press, London
[17] Hench LL (1998) Sol–gel silica: properties, processing and
technology transfer. William Andrew, Norwich
[18] Wilson J, Hench LL, Greenspan D (eds) (1995) Bioce-
ramics, vol 8. Pergamon Press, Oxford
[19] Wilson J, Hench LL (eds) (1995) Clinical performance of
skeletal prostheses. Springer, New York
[20] Hench LL, West JK (eds) (1992) Chemical processing of
advanced materials. Wiley-Interscience, Hoboken
[21] Yamamuro T, Hench LL, Wilson J (1990) CRC handbook
of bioactive ceramics, vol I. CRC Press, Boca Raton
[22] Yamamuro T, Hench LL, Wilson J (1990) CRC handbook
of bioactive ceramics, vol II. CRC Press, Boca Raton
[23] Hench LL, West JK (1990) Principles of electronic
ceramics. Wiley-Interscience, Hoboken
[24] Hench LL, Ulrich DR (eds) (1986) Science of ceramic
chemical processing. Wiley-Interscience, Hoboken
[25] Hench LL, Ulrich DR (eds) (1984) Ultrastructure process-
ing of ceramics, glasses, and composites. Wiley-Inter-
science, Hoboken
[26] Hench LL, Onoda GY (1978) Ceramic processing before
firing. Wiley-Interscience, Hoboken
[27] Hench LL, McEldowney BA (1976) Bibliography on
ceramics and glass. American Ceramic Society in Colum-
bus, Ohio
[28] Hench LL (1991) Bioceramics—from concept to clinic.
J Am Ceram Soc 74(7):1487–1510
[29] Hench LL, West JK (1990) The sol–gel process. Chem Rev
90(1):33–72
[30] Hench LL (1998) Bioceramics. J Am Ceram Soc
81(7):1705–1727
[31] Hench LL, Polak JM (2002) Third-generation biomedical
materials. Science 295(5557):114–117
[32] Hench LL, Splinter RJ, Allen WC, Greenlee TK (1971)
Bonding mechanisms at the interface of ceramic prosthetic
materials. J Biomed Mater Res 5(6):117–141
[33] Xynos ID, Edgar AJ, Buttery LDK, Hench LL, Polak JM
(2001) Gene-expression profiling of human osteoblasts
following treatment with the ionic products of Bioglass�
45S5 dissolution. J Biomed Mater Res 55(2):151–157
[34] Hench LL, Wilson J (1984) Surface-active biomaterials.
Science 226(4675):630–636
[35] Hench LL (2006) The story of Bioglass�. J Mater Sci
Mater Med 17(11):967–978
[36] Xynos ID, Edgar AJ, Buttery LDK, Hench LL, Polak JM
(2000) Ionic products of bioactive glass dissolution
increase proliferation of human osteoblasts and induce
insulin-like growth factor II mRNA expression and protein
synthesis. Biochem Biophys Res Commun 276(2):461–465
[37] Cao W, Hench LL (1996) Bioactive materials. Ceram Int
22(6):493–507
[38] Hench LL (1998) Biomaterials: a forecast for the future.
Biomaterials 19(16):1419–1423
[39] Hench LL, Paschall HA (1973) Direct chemical bond of
bioactive glass ceramic materials to bone and muscle.
J Biomed Mater Res 7(3):25–42
[40] Xynos ID, Hukkanen MVJ, Batten JJ, Buttery LD, Hench
LL, Polak JM (2000) Bioglass� 45S5 stimulates osteoblast
turnover and enhances bone formation in vitro: implications
and applications for bone tissue engineering. Calcif Tissue
Int 67(4):321–329
[41] Jones JR, Ehrenfried LM, Hench LL (2006) Optimising
bioactive glass scaffolds for bone tissue engineering. Bio-
materials 27(7):964–973
[42] Li R, Clark AE, Hench LL (1991) An investigation of
bioactive glass powders by sol–gel processing. J Appl
Biomater 2(4):231–239
[43] Peitl O, Zanotto ED, Hench LL (2001) Highly bioactive
P2O5–Na2O–CaO–SiO2 glass-ceramics. J Non Cryst Solids
292(1–3):115–126
[44] Pereira MM, Clark AE, Hench LL (1994) Calcium phos-
phate formation on sol–gel-derived bioactive glasses
in vitro. J Biomed Mater Res 28(6):693–698
[45] Gough JE, Jones JR, Hench LL (2004) Nodule formation
and mineralisation of human primary osteoblasts cultured
on a porous bioactive glass scaffold. Biomaterials
25(11):2039–2046
[46] Peitl O, Latorre GP, Hench LL (1996) Effect of crystal-
lization on apatite-layer formation of bioactive glass 45S5.
J Biomed Mater Res 30(4):509–514
J Mater Sci
Page 18
[47] Wilson J, Pigott GH, Schoen FJ, Hench LL (1981) Toxi-
cology and biocompatibility of Bioglasses. J Biomed Mater
Res 15(6):805–817
[48] Roether JA, Boccaccini AR, Hench LL, Maquet V, Gautier
S, Jerome R (2002) Development and in vitro characteri-
sation of novel bioresorbable and bioactive composite
materials based on polylactide foams and Bioglass� for
tissue engineering applications. Biomaterials
23(18):3871–3878
[49] Hench LL (1998) Bioactive materials: the potential for
tissue regeneration. J Biomed Mater Res 41(4):511–518
[50] Jones JR, Brauer DS, Hupa L, Greenspan DC (2016)
Bioglass and bioactive glasses and their impact on health-
care. Int J Appl Glass Sci. doi:10.1111/ijag.12252
[51] Hench LL, Clark AE (1970) Reaction mechanisms at bio-
ceramic interfaces. Am Ceram Soc Bull 49(4):481
[52] Scott GJ, Clark DE, Hench LL (1970) Quantitative analysis
of reaction kinetics using guinier X-Ray cameras. Am
Ceram Soc Bull 49(4):388
[53] Hench LL, Paschall HF, Paschall M, Mcvey J (1973) His-
tological responses at Bioglass and Bioglass-ceramic
interfaces. Am Ceram Soc Bull 52(4):432
[54] Hartwig BA, Loehman RE, Hench LL (1973) Morphology
of polypeptide adsorption on ceramic substrates. Am
Ceram Soc Bull 52(4):430
[55] Hench LL, Paschall HA (1974) Histochemical responses at
a biomaterials interface. J Biomed Mater Res 8(3):49–64
[56] Pantano CG, Clark AE, Hench LL (1974) Multilayer cor-
rosion films on Bioglass surfaces. J Am Ceram Soc
57(9):412–413
[57] Housefielg LG, Hench LL (1974) Mechanical strengthen-
ing of Bioglass-ceramic system. Am Ceram Soc Bull
53(4):384
[58] Clark AE, Pantano CG, Hench LL (1974) Auger spectro-
scopic analysis of bioceramic surface-reactions. Am Ceram
Soc Bull 53(4):384
[59] Piotrowski G, Hench LL, Allen WC, Miller GJ (1975)
Mechanical studies of bone Bioglass interfacial bond.
J Biomed Mater Res 9(4):47–61
[60] Stanley HR, Hench LL, Going R, Bennett C, Chellemi SJ,
King C, Ingersoll N, Ethridge E, Kreutziger K (1976)
Implantation of natural tooth form Bioglasses in baboons.
Oral Surg Oral Med Oral Pathol Oral Radiol Endod
42(3):339–356
[61] Clark AE, Hench LL, Paschall HA (1976) Influence of
surface chemistry on implant interface histology—theoret-
ical basis for implant materials selection. J Biomed Mater
Res 10(2):161–174
[62] Stanley HR, Hench L, Chellemi J, Going R, Bennett C,
King C, Ingersoll N, Ethridge E, Kreutziger K (1976)
Implantation of Bioglass ceramics in natural tooth form in
baboons. J Dent Res 55:B244–B244
[63] Hench LL, Pantano CG, Buscemi PJ, Greenspan DC (1977)
Analysis of Bioglass fixation of hip prostheses. J Biomed
Mater Res 11(2):267–282
[64] Hench LL (1977) Surface-chemistry of Bioglass-ceramic
implant materials. Abstracts of Papers of the American
Chemical Society, vol 173, p 10
[65] Karlan MS, Hench LL, Madden M, Ogino M (1978) Bone-
bonding bioactive material implant in head and neck—
Bioglass. Surg Forum 29:575–577
[66] Ogino M, Ohuchi F, Hench LL (1980) Compositional
dependence of the formation of calcium-phosphate films on
Bioglass. J Biomed Mater Res 14(1):55–64
[67] Ogino M, Hench LL (1980) Formation of calcium-phos-
phate films on silicate-glasses. J Non Cryst Solids
38–9:673–678
[68] Hench LL (1980) Special report—the interfacial behavior
of biomaterials, 1979. J Biomed Mater Res 14(6):803–811
[69] Hench LL; Clark DE (1981) Surface-analysis of ceramics
and glasses development and application. Abstracts of
Papers of the American Chemical Society 182(41)
[70] Karlan MS, Mufson RA, Grizzard MB, Buscemi PA,
Hench LL, Goldberg EP (1981) Potentiation of infections
by biomaterials—a comparison of 3 materials. Otolaryngol
Head Neck Surg 89(4):528–534
[71] Merwin GE, Atkins JS, Wilson J, Hench LL (1982)
Comparison of ossicular replacement materials in a mouse
ear model. Otolaryngol Head Neck Surg 90(4):461–469
[72] Seitz TL, Noonan KD, Hench LL, Noonan NE (1982)
Effect of fibronectin on the adhesion of an established cell-
line to a surface reactive biomaterial. J Biomed Mater Res
16(3):195–207
[73] Wilson J, Merwin GE, Hench LL (1985) Machining Bio-
glass implants. SAMPE J 21(3):6–8
[74] Hench LL, Wilson J (1986) Biocompatibility of silicates for
medical use. CIBA Foundation Symposia, vol 121,
pp 231–246
[75] Low SB, Fetner AE, Wilson J, Hench LL (1986) Histo-
logical-evaluation of Bioglass particulates in gingival tissue
(preliminary-results). J Dent Res 65:347
[76] Fetner AE, Low SB, Wilson J, Hench LL (1986) Com-
parison of various synthetic implant materials for peri-
odontal osseous repair. J Dent Res 65:347
[77] Clark AE, Stanley HR, Hall MB, King C, Colaizzi F,
Spilman D, Hench LL (1986) Clinical-trials of Bioglass
implants for alveolar ridge maintenance. J Dent Res 65:304
[78] Fetner AE, Low SB, Wilson J, Hench LL (1987) Histologic
evaluation of Bioglass particulates in gingival tissue. J Dent
Res 66:298
J Mater Sci
Page 19
[79] Warren LD, Clark AE, Hench LL (1989) An investigation
of Bioglass powders—quality assurance test procedure and
test criteria. J Biomed Mater Res Appl Biomater
23(A2):201–209
[80] Kim CY, Clark AE, Hench L (1989) Early stages of cal-
cium-phosphate layer formation in Bioglasses. J Non Cryst
Solids 113(2–3):195–202
[81] Hench LL, Wilson J (1990) The chemical-processing of
silicates for biological applications—a review. In: Zelinski
BJJ, Brinker CJ, Clark DE et al. (eds) Better ceramics
through chemistry IV. Materials research society sympo-
sium proceedings, vol 180, pp 1061–1071
[82] Yamamuro T, Takagi H, Gross U, Davies JE, Ricci JL,
Hench LL, Pilliar RM, Ducheyne P (1991) Bone bonding
behavior of biomaterials with different surface character-
istics under load-bearing conditions. In: Davies JE (ed)
Workshop on bone-biomaterial interface, Toronto, Canada,
03–04 Dec 1990, pp 406–414
[83] Brunski JB, Sumner R, Hench LL, Lemons JE, Pilliar RM
(1991) Influence of biomechanical factors at the bone-bio-
material interface. In: Davies JE (ed) Workshop on bone-
biomaterial interface, Toronto, Canada, 03–04 Dec 1990,
pp 391–405
[84] Niki M, Ito G, Matsuda T, Ogino M, Hench LL, Bonfield
W (1991) Comparative push-out data of bioactive and non-
bioactive materials of similar rugosity. In: Davies JE (ed)
Workshop on bone-biomaterial interface, Toronto, Canada,
03–04 Dec 1990, pp 350–356
[85] Vanblitterswijk CA, Hesseling SC, Vandenbrink J, Leen-
ders H, Bakker D, Hench LL, Davies JE, Parr J, Lemons
JE, Legeros RZ (1991) Polymer reactions resulting in bone
bonding—a review of the biocompatibility of polyactive.
In: Davies JE (ed) Workshop on bone-biomaterial interface,
Toronto, Canada, 03–04 Dec 1990, pp 295–307
[86] Davies JE, Nagai N, Takeshita N, Smith DC, Lemons JE,
Hench LL (1991) Deposition of cement-like matrix on
implant materials. In: Davies JE (ed) Workshop on bone-
biomaterial interface, Toronto, Canada, 03–04 Dec 1990,
pp 285–294
[87] Goldring SR, Wang JT, Ricci JL, Windeler AS, Hench LL,
Sodek J, Lemons JE, Bolander M, Kasemo B (1991)
Molecular biological approaches to investigate cell bio-
material interactions. In: Davies JE (ed) Workshop on bone-
biomaterial interface, Toronto, Canada, 03–04 Dec 1990,
pp 241–249
[88] Davies JE, Ottensmeyer P, Shen X, Hashimoto M, Peel S,
Glowacki T, Caplan A, Ericson LE, Revell P, Vanblitter-
swijk CA, Gross U, Hench LL, Niznick G, Ricci JL,
Sumner R, Tenenbaum H (1991) Early extracellular-matrix
synthesis by bone-cells. In: Davies JE (ed) Workshop on
bone-biomaterial interface, Toronto, Canada, 03–04 Dec
1990, pp 214–228
[89] Sodek J, Zhang Q, Goldberg HA, Domenicucci C, Kasugai
S, Wrana JL, Shapiro H, Chen J, Gross U, Triffit T, Ricci
JL, Legeros RZ, Bolander M, Hench LL (1991) Noncol-
lagenous bone proteins and their role in substrate-induced
bioactivity. In: Davies JE (ed) Workshop on bone-bioma-
terial interface, Toronto, Canada, 03–04 Dec 1990,
pp 97–110
[90] Hench LL, Lemons JE, Nancollas GH, Ducheyne P, Peel S,
Johnson BR, Brunski JB, Triffitt J, Bonfield W, Pilliar RM
(1991) Surface-reaction kinetics and adsorption of biolog-
ical moieties—a mechanistic approach to tissue attachment.
In: Davies JE (eds) Workshop on bone-biomaterial inter-
face, Toronto, Canada, 03–04 Dec 1990, pp 33–48
[91] Li RN, Clark AE, Hench LL (1992) Effects of structure and
surface-area on bioactive powders by sol–gel process. In:
Hench LL, West JK (eds) 5th conference on ultrastructure
processing, Orlando, FL, 17–21 Feb 1991 chemical pro-
cessing of advanced materials, pp 627–633
[92] Kim CY, Clark AE, Hench LL (1992) Compositional
dependence of calcium-phosphate layer formation in fluo-
ride Bioglasses. J Biomed Mater Res 26(9):1147–1161
[93] Gatti AM, Yamamuro T, Hench LL, Andersson OH (1993)
In-vivo reactions in some bioactive glasses and glass-ce-
ramics granules. Cells Mater 3(3):283–291
[94] Rehman I, Hench LL, Bonfield W (1993) Comparison of
hydroxycarbonate apatite layers on bioactive glasses with
human bone. In: Ducheyne P, Christiansen D (eds) 6th
international symposium on ceramics in medicine,
Philadelphia, PA, Nov 1993, bioceramics, vol 6,
pp 123–128
[95] Hench LL, West JK (1993) The kinetics of bioactive
ceramics. 6. Silica-water–amino acid interactions. In:
Ducheyne P, Christiansen D (eds) 6th international sym-
posium on ceramics in medicine, Philadelphia, PA, Nov
1993, bioceramics, vol 6, pp 35–40
[96] Filgueiras MR, Latorre G, Hench LL (1993) Solution
effects on the surface-reactions of a bioactive glass.
J Biomed Mater Res 27(4):445–453
[97] Filgueiras MRT, Latorre G, Hench LL (1993) Solution
effects on the surface-reactions of 3 bioactive glass com-
positions. J Biomed Mater Res 27(12):1485–1493
[98] Pereira MM, Clark AE, Hench LL (1994) Homogeneity
and bioactivity of sol–gel derived glasses. J Dent Res
73:276
[99] Oonishi H, Kushitani S, Yasukawa E, Kawakami H, Nakata
A, Koh S, Hench LL, Wilson J, Tsuji E, Sugihara T (1994)
Bone growth into spaces between 45S5 Bioglass granules.
In: Andersson OH, Happonen RP, YliUrpo A (eds) 7th
J Mater Sci
Page 20
international symposium on ceramics in medicine, Turku,
Finland, 28–30 July 1994 bioceramics, vol 7, pp 139–144
[100] Rehman I, Smith R, Hench LL, Bonfield W (1994) FT-
Raman spectroscopic analysis of natural bones and their
comparison with bioactive glasses and hydroxyapatite. In:
Andersson OH, Happonen RP, YliUrpo A (eds) 7th inter-
national symposium on ceramics in medicine. Turku, Fin-
land, 28–30 July 1994 bioceramics, vol 7, pp 79–84
[101] Zhong JP, LaTorre GP, Hench LL (1994) The kinetics of
bioactive ceramics. 7. Binding of collagen to hydroxyap-
atite and bioactive glass. In: Andersson OH, Happonen RP,
YliUrpo A (eds) 7th international symposium on ceramics
in medicine, Turku, Finland, 28–30 July 1994 bioceramics,
vol 7, pp 61–66
[102] West JK, Hench LL (1994) AM-1 molecular-orbital cal-
culations of silica-alanine-nitrogen interaction. J Biomed
Mater Res 28(5):625–633
[103] Rehman I, Hench LL, Bonfield W, Smith R (1994) Analysis
of surface-layers on bioactive glasses. Biomaterials
15(10):865–870
[104] Hench LL, West JK (1994) Inorganic pathways for
biosynthesis—a molecular-orbital modeling approach.
J Vac Sci Technol A Vac Surf Films 12(5):2962–2965
[105] Pereira MM, Clark AE, Hench LL (1995) Effect of texture
on the rate of hydroxyapatite formation on gel-silica sur-
face. J Am Ceram Soc 78(9):2463–2468
[106] Rehman I, Smith R, Hench LL, Bonfield W (1995) Struc-
tural evaluation of human and sheep bone and comparison
with synthetic hydroxyapatite by FT-Raman spectroscopy.
J Biomed Mater Res 29(10):1287–1294
[107] Lobel KD, West JK, Hench LL (1996) Molecular orbital
model of the diatom frustule: potential for biomimetics.
J Mater Sci Lett 15(8):648–650
[108] Lobel KD, West JK, Hench LL (1996) Computational
model for protein mediated biomineralization of the diatom
frustules. Mar Biol 126(3):353–360
[109] Lobel KD, Hench LL (1996) In-vitro protein interactions
with a bioactive gel-glass. J Sol-Gel Sci Technol
7(1–2):69–76
[110] Pereira MM, Hench LL (1996) Mechanisms of hydroxya-
patite formation on porous gel-silica substrates. J Sol-Gel
Sci Technol 7(1–2):59–68
[111] Stanley HR, Hall MB, Clark AE, King CJ, Hench LL, Berte
JJ (1997) Using 45S5 Bioglass cones as endosseous ridge
maintenance implants to prevent alveolar ridge resorption: a
5-year evaluation. Int J Oral Maxillofac Implants
12(1):95–105
[112] Oonishi H, Kushitani S, Yasukawa E, Iwaki H, Hench LL,
Wilson J, Tsuji EI, Sugihara T (1997) Particulate Bioglass
compared with hydroxyapatite as a bone graft substitute.
Clin Orthop Relat Res 334:316–325
[113] Lobel KD, West JK, Hench LL (1997) Silicon in connec-
tive tissue: semi-empirical molecular orbital models. In:
Sedel L, Rey C (eds) 10th international symposium on
ceramics in medicine, Paris, France, 05–09 Oct 1997 bio-
ceramics, vol 10, pp 557–560
[114] Latour RA, West JK, Hench LL, Trembley SD, Tian Y,
Lickfield GC, Wheeler AP (1997) Adsorption of L-lysine
onto silica glass: a synergistic approach combining
molecular modeling with experimental analysis. In: Sedel
L, Rey C (eds) 10th international symposium on ceramics
in medicine, Paris, France, 05–09 Oct 1997 bioceramics,
vol 10, pp 541–544
[115] Gatti AM, Hench LL, Monari E, Gonella F, Caccavale F
(eds) Test of bioactivity in four different glasses. In: Sedel
L, Rey C (eds) 10th international symposium on ceramics
in medicine, Paris, France, 05–09 Oct 1997 bioceramics,
vol 10, pp 287–290
[116] Fujishiro Y, Oonishi H, Hench LL (1997) Quantitative
comparison of in vivo bone generation with particulate
Bioglass� and hydroxyapatite as a bone graft substitute. In:
Sedel L, Rey C (eds) 10th international symposium on
ceramics in medicine, Paris, France, 05–09 Oct 1997 bio-
ceramics, vol 10, pp 283–286
[117] Salinas AJ, Serret A, Vallet-Regi M, Hench LL (1997)
Structure and solvation effects of PO43-, HPO4
2-, H2PO4-
and H3PO4 from AM1 and PM3. In: Sedel L, Rey C (eds)
10th international symposium on ceramics in medicine,
Paris, France, 05–09 Oct 1997 bioceramics, vol 10,
pp 245–248
[118] Hench LL (1997) Theory of bioactivity: the potential for
skeletal regeneration. Anales Quim Int Ed 93(1):S44–S48
[119] West JK, Brennan AB, Clark AE, Hench LL (1997)
Molecular orbital models of ring expansion mechanisms in
the silica-carbon monoxide system. J Biomed Mater Res
36(2):209–215
[120] Hench LL (1997) Sol–gel materials for bioceramic appli-
cations. Curr Opin Solid State Mater Sci 2(5):604–610
[121] Fujishiro Y, Hench LL, Oonishi H (1997) Quantitative rates
of in vivo bone generation for Bioglass� and hydroxyap-
atite particles as bone graft substitute. J Mater Sci Mater
Med 8(11):649–652
[122] West JK, Latour R, Hench LL (1997) Molecular modeling
study of adsorption of poly-L-lysine onto silica glass.
J Biomed Mater Res 37(4):585–591
[123] Thompson ID, Hench LL (1998) Mechanical properties of
bioactive glasses, glass-ceramics and composites. Proc Inst
Mech Eng Part H J Eng Med 212(H2):127–136
J Mater Sci
Page 21
[124] Hench LL, Wheeler DL, Greenspan DC (1998) Molecular
control of bioactivity in sol–gel glasses. J Sol-Gel Sci
Technol 13(1–3):245–250
[125] Thompson I, Chan C, Robinson P, Revell P, Wilson J,
Hench LL (1998) Evaluation of Bioglass� 45S5-Dextran as
bone graft substitute. J Dent Res 77:989
[126] Lobel KD, Hench LL (1998) In vitro adsorption and
activity of enzymes on reaction layers of bioactive glass
substrates. J Biomed Mater Res 39(4):575–579
[127] West JK, Brennan AB, Clark AE, Zamora M, Hench LL
(1998) Cyclic anhydride ring opening reactions: theory and
application. J Biomed Mater Res 41(1):8–17
[128] Xynos ID, Hukkanen MVJ, Hench LL, Polak JM (1999)
Bioglass 45S5 induces mineralisation in osteoblast cultures
in vitro. J Pathol 187:38A–38A
[129] Oonishi H, Hench LL, Wilson J, Sugihara F, Tsuji E,
Kushitani S, Iwaki H (1999) Comparative bone growth
behavior in granules of bioceramic materials of various
sizes. J Biomed Mater Res 44(1):31–43
[130] Hench LL (1999) Bioactive glasses and glass-ceramics. In:
Bioceramics. Materials science forum, vol 293, pp 37–63
[131] Coleman NJ, Hench LL (2000) A gel-derived mesoporous
silica reference material for surface analysis by gas sorp-
tion—2. Durability and stability. Ceram Int 26(2):179–186
[132] Coleman NJ, Hench LL (2000) A gel-derived mesoporous
silica reference material for surface analysis by gas sorp-
tion—1. Textural features. Ceram Int 26(2):171–178
[133] Sepulveda P, Jones JR, Hench LL (2000) Effect of particle
size on Bioglass� dissolution. In: Giannini S, Moroni A
(eds) 13th international symposium on ceramic in medi-
cine/symposium on ceramic materials in orthopaedic sur-
gery: clinical results in the year 2000, Bologna, Italy, 22–26
Nov 2000, bioceramics. Key engineering materials, vol
192, no 1, pp 629–633
[134] Cook R, Fielder E, Watson T, Robinson P, Hench LL
(2000) Pore characterisation and interconnectivity studies
on bioactive 58S sol–gel glass. In: Giannini S, Moroni A
(eds) 13th international symposium on ceramic in medi-
cine/symposium on ceramic materials in orthopaedic sur-
gery: clinical results in the year 2000, Bologna, Italy, 22–26
Nov 2000, bioceramics. Key engineering materials, vol
192, no 1, pp 625–628
[135] Bellantone M, Hench LL (2000) Bioactive behaviour of
sol–gel derived antibacterial bioactive glass. In: Giannini S,
Moroni A (eds) 13th international symposium on ceramic
in medicine/symposium on ceramic materials in orthopae-
dic surgery: clinical results in the year 2000, Bologna, Italy,
22–26 Nov 2000, bioceramics. Key engineering materials,
vol 192, no 1, pp 617–620
[136] Saravanapavan P, Hench LL (2000) Bioactive sol–gel
glasses in the CaO–SiO2 system. In: Giannini S, Moroni A
(eds) 13th international symposium on ceramic in medi-
cine/symposium on ceramic materials in orthopaedic sur-
gery: clinical results in the year 2000, Bologna, Italy, 22–26
Nov 2000, bioceramics. Key engineering materials, vol
192, no 1, pp 609–612
[137] Bellantone M, Coleman NJ, Hench LL (2000) A novel sol–
gel derived bioactive glass featuring antibacterial proper-
ties. In: Giannini S, Moroni A (eds) 13th international
symposium on ceramic in medicine/symposium on ceramic
materials in orthopaedic surgery: clinical results in the year
2000, Bologna, Italy, 22–26 Nov 2000, bioceramics. Key
engineering materials, vol 192, no 1, pp 597-600
[138] Maroothynaden J, Hench LL (2000) Effect of Bioglass�
repeat dosage on mineralisation of embryonic bone
‘in vitro’. In: Giannini S, Moroni A (eds) 13th international
symposium on ceramic in medicine/symposium on ceramic
materials in orthopaedic surgery: clinical results in the year
2000, Bologna, Italy, 22–26 Nov 2000, bioceramics. Key
engineering materials, vol 192, no 1, pp 585–588
[139] Hayakawa S, Hench LL (2000) AM1 study on infra-red
spectra of silica clusters modified by fluorine. J Non Cryst
Solids 262(1–3):264–270
[140] De Diego MA, Coleman NJ, Hench LL (2000) Tensile
properties of bioactive fibers for tissue engineering appli-
cations. J Biomed Mater Res 53(3):199–203
[141] Oonishi H, Hench LL, Wilson J, Sugihara F, Tsuji E,
Matsuura M, Kin S, Yamamoto T, Mizokawa S (2000)
Quantitative comparison of bone growth behavior in
granules of Bioglass�, A-W glass-ceramic, and hydroxya-
patite. J Biomed Mater Res 51(1):37–46
[142] Bellantone M, Coleman NJ, Hench LL (2000) Bacterio-
static action of a novel four-component bioactive glass.
J Biomed Mater Res 51(3):484–490
[143] Clupper DC, Hench LL (2001) Bioactive response of Ag-
doped tape cast Bioglass� 45S5 following heat treatment.
J Mater Sci Mater Med 12(10–12):917–921
[144] Xynos ID, Edgar AJ, Ramachandran M, Buttery LDK,
Hench LL, Polak JM (2001) Biochemical characterisation
and gene expression profiling of human trabecular bone
derived osteoblasts. J Pathol 193:31A–31A
[145] Saravanapavan P, Hench LL (2001) Low-temperature syn-
thesis, structure, and bioactivity of gel-derived glasses in
the binary CaO–SiO2 system. J Biomed Mater Res
54(4):608–618
[146] Orefice RL, Hench LL, Clark AE, Brennan AB (2001)
Novel sol–gel bioactive fibers. J Biomed Mater Res
55(4):460–467
J Mater Sci
Page 22
[147] Sepulveda P, Jones JR, Hench LL (2001) Characterization
of melt-derived 45S5 and sol–gel-derived 58S bioactive
glasses. J Biomed Mater Res 58(6):734–740
[148] Jones JR, Sepulveda P, Hench LL (2001) Dose-dependent
behavior of bioactive glass dissolution. J Biomed Mater
Res 58(6):720–726
[149] Jones JR, Sepulveda P, Hench LL (2002) Concentration
dependence of bioactive glass dissolution in vitro. In:
Brown S, Clarke I, Williams P (eds) 14th international
symposium on ceramics in medicine (bioceramics-14),
Palm Springs, California, 14–17 Nov 2001, bioceramics 14.
Key engineering materials vol 218-2, pp 303–306
[150] Jones JR, Sepulveda P, Hench LL (2002) The effect of
temperature on the processing and properties of macrop-
orous bioactive glass foams. In: Brown S, Clarke I, Wil-
liams P (eds) 14th international symposium on ceramics in
medicine (bioceramics-14), Palm Springs, California,
14–17 Nov 2001, bioceramics 14. Key engineering mate-
rials, vol 218, no 2, pp 299–302
[151] Sepulveda P, Jones JR, Hench LL (2002) Synthesis of sol–
gel derived bioactive foams. In: Brown S, Clarke I, Wil-
liams P (eds) 14th international symposium on ceramics in
medicine (bioceramics-14), Palm Springs, California,
14–17 Nov 2001, bioceramics 14. Key engineering mate-
rials, vol 218, no 2, pp 287–290
[152] Bielby RC, Saravanapavan P, Polak JM, Hench LL
(2002) Study of osteoblast differentiation and prolifera-
tion on the surface of binary bioactive gel-glasses. In:
Brown S, Clarke I, Williams P (eds) 14th international
symposium on ceramics in medicine (bioceramics-14),
Palm Springs, California, 14–17 Nov 2001, bioceramics
14. Key engineering materials, vol 218, no 2,
pp 269–272
[153] Sepulveda P, Jones JR, Hench LL (2002) Bioactive sol–gel
foams for tissue repair. J Biomed Mater Res 59(2):340–348
[154] Cook RJ, Watson TF, Robinson PD, Thompson ID, Hench
LL (2002) Interconnectivity and pore characterisation
studies on new 58 S sol–gel bioactive bone allograft glass.
J Dent Res 81:A341–A341
[155] Bosetti M, Hench L, Cannas M (2002) Interaction of
bioactive glasses with peritoneal macrophages and mono-
cytes in vitro. J Biomed Mater Res 60(1):79–85
[156] Day R, Boccaccini AR, Roether JA, Surey S, Forbes A,
Hench LL, Gabe S (2002) The effect of Bioglass� on
epithelial cell and fibroblast proliferation and incorpora-
tion into a PGA matrix. Gastroenterology 122(4):A373–
A373
[157] Bellantone M, Williams HD, Hench LL (2002) Broad-
spectrum bactericidal activity of Ag2O-doped bioactive
glass. Antimicrob Agents Chemother 46(6):1940–1945
[158] Sepulveda P, Jones JR, Hench LL (2002) In vitro dissolu-
tion of melt-derived 45S5 and sol–gel derived 58S bioac-
tive glasses. J Biomed Mater Res 61(2):301–311
[159] Lenza RFS, Vasconcelos WL, Jones JR, Hench LL (2002)
Surface-modified 3D scaffolds for tissue engineering.
J Mater Sci Mater Med 13(9):837–842
[160] Hench LL, Xynos ID, Edgar AJ, Buttery LDK, Polak JM,
Zhong JP, Liu XY, Chang J (2002) Gene activating glasses.
J Inorg Mater 17(5):897–909
[161] Latour RA, Hench LL (2002) A theoretical analysis of the
thermodynamic contributions for the adsorption of indi-
vidual protein residues on functionalized surfaces. Bioma-
terials 23(23):4633–4648
[162] Bosetti M, Zanardi L, Hench L, Cannas M (2003) Type I
collagen production by osteoblast-like cells cultured in
contact with different bioactive glasses. J Biomed Mater
Res Part A 64A(1):189–195
[163] Tan A, Romanska HM, Lenza R, Jones J, Hench LL, Polak
JM, Bishop AE (2003) The effect of 58S bioactive sol–gel
derived foams on the growth of murine lung epithelial cells.
In: BenNissan B, Sher D, Walsh W (eds) 15th international
symposium on ceramics in medicine, Univ Technol, Syd-
ney, Australia, 04–08 Dec 2002, bioceramics 15. Key
engineering materials, vol 240, no 2, pp 719–723
[164] Saravanapavan P, Patel MH, Hench LL (2003) Effect of
particle size on the concentration and rate of Ag? release
from antimicrobial SiO2–CaO–P2O5–Ag2O gel-glasses. In:
BenNissan B, Sher D, Walsh W (eds) 15th international
symposium on ceramics in medicine, Univ Technol, Syd-
ney, Australia, 04–08 Dec 2002, bioceramics 15. Key
engineering materials, vol 240, no 2, pp 245–248
[165] Saravanapavan P, Patel MH, Hench LL (2003) Effect of
composition and texture on controlled rate of release of an
antibacterial agent from bioactive gel-glasses. In: BenNis-
san B, Sher D, Walsh W (eds) 15th international sympo-
sium on ceramics in medicine, Univ Technol, Sydney,
Australia, 04–08 Dec 2002, bioceramics 15. Key engi-
neering materials, vol 240, no 2, pp 233–236
[166] Saravanapavan P, Hench LL (2003) Dissolution of bioac-
tive gel-glass powders in the SiO2–CaO system. In:
BenNissan B, Sher D, Walsh W (eds) 15th international
symposium on ceramics in medicine, Univ Technol, Syd-
ney, Australia, 04–08 Dec 2002, bioceramics 15. Key
engineering materials, vol 240, no 2, pp 213–216
[167] Jones JR, Hench LL (2003) Effect of porosity on the
mechanical properties of bioactive foam scaffolds. In:
BenNissan B, Sher D, Walsh W (eds) 15th international
symposium on ceramics in medicine, Univ Technol, Syd-
ney, Australia, 04–08 Dec 2002, bioceramics 15. Key
engineering materials, vol 240, no 2, pp 209–212
J Mater Sci
Page 23
[168] Pryce RS, Hench LL (2003) Characterisation of a novel
nitric oxide releasing bioactive glass. In: BenNissan B, Sher
D, Walsh W (eds) 15th international symposium on
ceramics in medicine, Univ Technol, Sydney, Australia,
04–08 Dec 2002, bioceramics 15. Key engineering mate-
rials, vol 240, no 2, pp 205–208
[169] Pryce RS, Hench LL (2003) Dissolution characteristics of
bioactive glasses. In: BenNissan B, Sher D, Walsh W (eds)
15th international symposium on ceramics in medicine,
Univ Technol, Sydney, Australia, 04–08 Dec 2002, bioce-
ramics 15. Key engineering materials, vol 240, no 2,
pp 201–204
[170] Clupper DC, Hench LL (2003) Crystallization kinetics of
tape cast bioactive glass 45S5. J Non Cryst Solids
318(1–2):43–48
[171] Saravanapavan P, Hench LL (2003) Mesoporous calcium
silicate glasses. II. Textural characterisation. J Non Cryst
Solids 318(1–2):14–26
[172] Saravanapavan P, Hench LL (2003) Mesoporous calcium
silicate glasses. I. Synthesis. J Non Cryst Solids
318(1–2):1–13
[173] Saravanapavan P, Jones JR, Pryce RS, Hench LL (2003)
Bioactivity of gel-glass powders in the CaO–SiO2 system: a
comparison with ternary (CaO–P2O5–SiO2) and quaternary
glasses (SiO2–CaO–P2O5–Na2O). J Biomed Mater Res Part
A 66A(1):110–119
[174] Jones JR, Hench LL (2003) Regeneration of trabecular
bone using porous ceramics. Curr Opin Solid State Mater
Sci 7(4–5):301–307
[175] Jones JR, Hench LL (2003) Effect of surfactant concen-
tration and composition on the structure and properties of
sol–gel-derived bioactive glass foam scaffolds for tissue
engineering. J Mater Sci 38(18):3783–3790. doi:10.1023/
A:1025988301542
[176] Clupper DC, Gough JE, Hall MM, Clare AG, LaCourse
WC, Hench LL (2003) In vitro bioactivity of S520 glass
fibers and initial assessment of osteoblast attachment.
J Biomed Mater Res Part A 67A(1):285–294
[177] Lenza RFS, Jones JR, Vasconcelos WL, Hench LL (2003)
In vitro release kinetics of proteins from bioactive foams.
J Biomed Mater Res Part A 67A(1):121–129
[178] Shah P, Watson TF, Hench LL, Deb S (2003) A novel
bioactive liner. J Dent Res 82:484
[179] Pryce RS, Hench LL (2004) Tailoring of bioactive glasses
for the release of nitric oxide as an osteogenic stimulus.
J Mater Chem 14(14):2303–2310
[180] Hench LL, Xynos ID, Polak JM (2004) Bioactive glasses
for in situ tissue regeneration. J Biomater Sci Polym Ed
15(4):543–562
[181] Hench LL (2004) Glasses to turn on genes. Glass Sci
Technol 77(C7):95–103
[182] Shirtliff VJ, Hench LL (2004) Macroporous bioactive
glasses. In: Barbosa MA, Monteiro FJ, Correia R et al (eds)
16th international symposium on ceramics in medicine.
Porto, Portugal, 06–09 Nov 2003, bioceramics, vol 16. Key
engineering materials vol 254, no 2, pp 989–992
[183] Gough JE, Jones JR, Hench LL (2004) Osteoblast nodule
formation and mineralisation on foamed 58S bioactive
glass. In: Barbosa MA, Monteiro FJ, Correia R et al (eds)
16th international symposium on ceramics in medicine,
Porto, Portugal, 06–09 Nov 2003 bioceramics, vol 16. Key
engineering materials, vol 254, no 2, pp 981–984
[184] Gough JE, Clupper DC, Hench LL (2004) Osteoblast
responses to sintered and tapecast bioactive glass. In:
Barbosa MA, Monteiro FJ, Correia R et al (eds) 16th
international symposium on ceramics in medicine, Porto,
Portugal, 06–09 Nov 2003 bioceramics, vol 16. Key
engineering materials, vol 254, no 2, pp. 813–816
[185] Saravanapavan P, Selvakumaran J, Hench LL (2004) Indi-
rect cytotoxicity evaluation of soluble silica, calcium,
phosphate silver ions. In: Barbosa MA, Monteiro FJ, Cor-
reia R et al (eds) 16th international symposium on ceramics
in medicine, Porto, Portugal, 06–09 Nov 2003 bioceramics,
vol 16. Key engineering materials, vol 254, no 2,
pp 785–788
[186] Saravanapavan P, Verrier S, Hench LL (2004) A549 lung
carcinoma cells: binary vs. ternary bioactive gel-glasses. In:
Barbosa MA, Monteiro FJ, Correia R et al (eds) 16th
international symposium on ceramics in medicine, Porto,
Portugal, 06–09 Nov 2003 bioceramics, vol 16. Key
engineering materials, vol 254, no 2, pp 781–784
[187] Pryce RS, Hench LL (2004) Surface modification of 58S
bioactive gel-glass with an aminosilane. In: Barbosa MA,
Monteiro FJ, Correia R et al (eds) 16th international sym-
posium on ceramics in medicine, Porto, Portugal, 06–09
Nov 2003, bioceramics, vol 16. Key engineering materials,
vol 254, no 2, pp 765–768
[188] Hench LL (2004) Stimulation of bone repair by gene
activating glasses. In: Barbosa MA, Monteiro FJ, Correia R
et al (eds) 16th international symposium on ceramics in
medicine, Porto, Portugal, 06–09 Nov 2003 bioceramics,
vol 16. Key engineering materials, vol 254, no 2, pp 3–6
[189] Saravanapavan P, Gough JE, Jones JR, Hench LL (2004)
Antimicrobial macroporous gel-glasses: dissolution and
cytotoxicity. In: Barbosa MA, Monteiro FJ, Correia R et al
(eds) 16th international symposium on ceramics in medi-
cine, Porto, Portugal, 06–09 Nov 2003 bioceramics, vol 16.
Key engineering materials, vol 254, no 2, pp 1087–1090
J Mater Sci
Page 24
[190] Saravanapavan P, Jones JR, Verrier S, Beilby R, Shirtliff
VJ, Hench LL, Polak JM (2004) Binary CaO–SiO2 gel-
glasses for biomedical applications. Bio-Med Mater Eng
14(4):467–486
[191] Jones JR, Hench LL (2004) Factors affecting the structure
and properties of bioactive foam scaffolds for tissue engi-
neering. J Biomed Mater Res Part B 68B(1):36–44
[192] Jones JR, Ahir S, Hench LL (2004) Large-scale production
of 3D bioactive glass macroporous scaffolds for tissue
engineering. J Sol-Gel Sci Technol 29(3):179–188
[193] Gough JE, Notingher I, Hench LL (2004) Osteoblast
attachment and mineralized nodule formation on rough and
smooth 45S5 bioactive glass monoliths. J Biomed Mater
Res Part A 68A(4):640–650
[194] Gough JE, Clupper DC, Hench LL (2004) Osteoblast
responses to tape-cast and sintered bioactive glass ceramics.
J Biomed Mater Res Part A 69A(4):621–628
[195] Bielby RC, Christodoulou IS, Pryce RS, Radford WJP,
Hench LL, Polak JM (2004) Time- and concentration-de-
pendent effects of dissolution products of 58S
sol–gel bioactive glass on proliferation and differentiation
of murine and human osteoblasts. Tissue Eng
10(7–8):1018–1026
[196] Clupper DC, Gough JE, Embanga PM, Notingher I, Hench
LL, Hall MM (2004) Bioactive evaluation of 45S5 bioac-
tive glass fibres and preliminary study of human osteoblast
attachment. J Mater Sci Mater Med 15(7):803–808
[197] Skipper LJ, Sowrey FE, Pickup DM, Fitzgerald V, Rashid
R, Drake KO, Lin ZJ, Saravanapavan P, Hench LL, Smith
ME, Newport RJ (2004) Structural studies of bioactivity in
sol–gel-derived glasses by X-ray spectroscopy. J Biomed
Mater Res Part A 70A(2):354–360
[198] Clupper DC, Hench LL, Mecholsky JJ (2004) Strength and
toughness of tape cast bioactive glass 45S5 following heat
treatment. J Eur Ceram Soc 24(10–11):2929–2934
[199] Atwood RC, Jones JR, Lee PD, Hench LL (2004) Analysis
of pore interconnectivity in bioactive glass foams using
X-ray microtomography. Scripta Mater 51(11):1029–1033
[200] Skipper LJ, Sowrey FE, Pickup DM, Drake KO, Smith ME,
Saravanapavan P, Hench LL, Newport RJ (2005) The
structure of a bioactive calcia-silica sol–gel glass. J Mater
Chem 15(24):2369–2374
[201] Skipper LJ, Sowrey FE, Pickup DM, Newport RJ, Drake
KO, Lin ZH, Smith ME, Saravanapavan P, Hench LL
(2005) The atomic-scale interaction of bioactive glasses
with simulated body fluid. In: MendezVilas A (eds) 1st
international meeting on applied physics, Badajoz, Spain,
13–18 Oct 2003 cross-disciplinary applied research in
materials science and technology. Materials science forum,
vol 480, pp 21–25
[202] Jones JR, Milroy GE, Cameron RE, Bonfield W, Hench LL
(2005) Using X-ray micro-CT imaging to monitor disso-
lution of macroporous bioactive glass scaffolds. In: Li P,
Zhang K, Colwell CW (eds) 17th international symposium
on ceramics in medicine, New Orleans, LA, 08–12 Dec
2004 bioceramics, vol 17. Key engineering materials, vol
284–286, pp 493–496
[203] Lohbauer U, Jell G, Saravanapavan P, Jones JR, Hench LL
(2005) Antimicrobial treatment of dental osseous defects
with silver doped Bioglass: osteoblast cell response. In: Li
P, Zhang K, Colwell CW (eds) 17th international sympo-
sium on ceramics in medicine, New Orleans, LA, 08–12
Dec 2004 bioceramics, vol 17. Key engineering materials,
vol 284–286, pp 435–438
[204] Lohbauer U, Jell G, Saravanapavan P, Jones JR, Hench LL
(2005) Indirect cytotoxicity evaluation of silver doped
bioglass Ag-S70C30 on human primary keratinocytes. In:
Li P, Zhang K, Colwell CW (eds) 17th international sym-
posium on ceramics in medicine, New Orleans, LA, 08–12
Dec 2004 bioceramics, vol 17. Key engineering materials,
vol 284–286, pp 431–434
[205] Bielby RC, Pryce RS, Hench LL, Polak JM (2005)
Enhanced derivation of osteogenic cells from murine
embryonic stem cells after treatment with ionic dissolution
products of 58S bioactive sol–gel glass. Tissue Eng
11(3–4):479–488
[206] Christodoulou I, Buttery LDK, Saravanapavan P, Tai GP,
Hench LL, Polak JM (2005) Dose- and time-dependent
effect of bioactive gel-glass ionic-dissolution products on
human fetal osteoblast-specific gene expression. J Biomed
Mater Res Part B Appl Biomater 74B(1):529–537
[207] Pickup DM, Sowrey FE, Skipper LJ, Newport RJ,
Gunawidjaja P, Drake KO, Smith ME, Saravanapavan P,
Hench LL (2005) The structure of TiO2–SiO2 and CaO–
SiO2 sol–gel glasses from neutron diffraction and solid state
NMR using isotopic enrichment of titanium, calcium and
oxygen. Phys Chem Glasses 46(4):433–438
[208] Jones JR, Lee PD, Hench LL (2006) Hierarchical porous
materials for tissue engineering. Philos Trans R Soc A Math
Phys Eng Sci 364(1838):263–281
[209] Christodoulou L, Buttery LDK, Tai GP, Hench LL, Polak
JM (2006) Characterization of human fetal osteoblasts by
microarray analysis following stimulation with 58S bioac-
tive gel-glass ionic dissolution products. J Biomed Mater
Res Part B Appl Biomater 77B(2):431–446
[210] Newport RJ, Skipper LJ, Carta D, Pickup DM, Sowrey FE,
Smith ME, Saravanapavan P, Hench LL (2006) The use of
advanced diffraction methods in the study of the structure
of a bioactive calcia: silica sol–gel glass. J Mater Sci Mater
Med 17(11):1003–1010
J Mater Sci
Page 25
[211] Jones JR, Ehrenfried LM, Saravanapavan P, Hench LL
(2006) Controlling ion release from bioactive glass foam
scaffolds with antibacterial properties. J Mater Sci Mater
Med 17(11):989–996
[212] Ahmad M, Jones JR, Hench LL (2007) Fabricating sol–gel
glass monoliths with controlled nanoporosity. Biomed
Mater 2(1):6–10
[213] Jones JR, Tsigkou O, Coates EE, Stevens MM, Polak JM,
Hench LL (2007) Extracellular matrix formation and min-
eralization on a phosphate-free porous bioactive glass
scaffold using primary human osteoblast (HOB) cells.
Biomaterials 28(9):1653–1663
[214] Hench LL (2009) Genetic design of bioactive glass. J Eur
Ceram Soc 29(7):1257–1265
[215] Orefice R, Hench LL, Brennan A (2009) Evaluation of the
interactions between collagen and the surface of a bioactive
glass during in vitro test. J Biomed Mater Res Part A
90A(1):114–120
[216] Hench LL, Day DE, Hoeland W, Rheinberger VM (2010)
Glass and medicine. Int J Appl Glass Sci 1(1):104–117
[217] Hench LL, Greenspan D (2013) Interactions between
bioactive glass and collagen: a review and new perspec-
tives. J Aust Ceram Soc 49(2):1–40
[218] Hench LL (2013) Chronology of bioactive glass develop-
ment and clinical applications. New J Glass Ceram
3(2):67–73
[219] Hench LL, Roki N, Fenn MB (1073) Bioactive glasses:
importance of structure and properties in bone regeneration.
J Mol Struct 2014:24–30
[220] Miguez-Pacheco V, Hench LL, Boccaccini AR (2015)
Bioactive glasses beyond bone and teeth: emerging appli-
cations in contact with soft tissues. Acta Biomater 13:1–15
[221] Miguez-Pacheco V, Greenspan D, Hench LL, Boccaccini
AR (2015) Bioactive glasses in soft tissue repair. Am
Ceram Soc Bull 94(6):27–31
[222] Hench LL (2016) Bioglass: 10 milestones from concept to
commerce. J Non Cryst Solids 432:2–8
[223] Hench LL (2015) Opening paper 2015—some comments
on Bioglass: four eras of discovery and development.
Biomed Glasses 1(2015):1–11
[224] Hench LL, Walker MM (1979–1987) Inorganic dental or
surgical implant—has surface of silica-rich or silica rich-
forming material for bonding to bone tissue (NL 9.10.79),
DE2910335-A; NL7902497-A; US4171544-A; GB2020197-
A; JP54135496-A; FR2421595-A; CA1117796-A; CA1121
616-A;GB2020197-B;DE2954180-A;DE2910335-C;DE29
54180-C; JP87047546-B
[225] Merwin GE, Spilman DB, Hench LL (1986–1990) Middle
ear prosthesis—having a disc-like base which becomes
encapsulated with a thin layer of collagen after
implantation, EP203785-B1; EP203785-A; US4676796-A;
ES8707101-A; EP203785-B; DE3674247-G
[226] Low SB, Fetner AE, Clark AE, Hench LL, Wilsonhenc J,
Wilson-Hench J (1986–1998) Periodontal osseous defect
repair compsn. Comprising bioactive and biocompatible
glass contg. oxide(s) of silicon, calcium, sodium and
phosphorus and opt. calcium fluoride, EP206726-A;
US4851046-A; EP206726-B; DE3675083-G; EP206726-
B2
[227] Hench LL, Spilman DB, Hench JW (1988) Prosthetic
device comprising bioactive glass compsn.–contg.
oxide(s) of silicon, phosphorus, calcium and sodium with
partial replacement of calcium oxide by calcium fluoride,
US4775646-A
[228] Walker DR, Hench JW, Ramer M, Hench LL (1991)
Injectable glass compsns. For tissue reconstruction, etc.,
comprising particles of bioactive glass suspended in hya-
luronic acid soln., WO9117777-A
[229] Hench LL, Clark AE, Li R (1991) Alkali-free bioactive
glass prepd. using sol–gel process—by mixing alkoxysilane
and alkoxyphosphate to form compsn of silica, calcia and
phosphorus oxide, which forms hydroxyapatite,
WO9117965-A; US5074916-A
[230] West JK, Hench LL (1996) Polypeptide synthesis—com-
prises contacting amino acids or peptide(s) with hydrated
silica entity, US5486598-A
[231] Hench LL, LaTorre G, Filho OP, Zanotto E (1997–2003)
Bioactive ceramic composition useful in load-bearing
prosthetic devices—comprises silicon dioxide, calcium
oxide, sodium oxide and phosphorus pentoxide, and forms
hydroxy-carbonate apatite layer on implanted surface,
WO9741079-A; EP896572-A; WO9741079-A1; AU9730
699-A; EP896572-A1; US5981412-A; KR2000065167-A;
JP2001526619-W; JP3457680-B2
[232] Marotta JS, Latorre G, Batich C, Hench LL (1999–2001)
Percutaneous biofixed medical implants, WO9918891-A1;
AU9897860-A; US5990380-A; US6299930-B1
[233] Bellantone M, Coleman NJ, Hench LL (2000–2011) New
silver-containing, sol–gel derived bioactive glass compo-
sitions for grafting skin or treating wounds and burns, are
particularly useful as bone graft materials, WO200076486-
A1; AU200054852-A; EP1196150-A1; US6482444-B1;
EP1196150-B1; DE60022197-E; ES2245644-T3; DE600
22197-T2; CA2377402-C
[234] Hench LL, Thompson ID, Cook RJ, Watson TF, Hench L,
Thompson I, Cook J, Watson F, Robinson D (2002–2012)
Use of bioactive glass as abrasive used in treatment of
dental hard tissue, and pulp disorders such as dental caries,
pain, tooth wear, discoloration, dentine hyper-sensitivity
and dental tissue congenital malformations,
J Mater Sci
Page 26
WO200278645-A; WO200278645-A1; US2003008263-
A1; EP1372574-A1; AU2002251213-A1; EP1372574-B1;
DE60204217-E; ES2242851-T3; DE60204225-T2;
DE60204217-T2; US7329126-B2; US2008176190-A1;
CA2442471-C
[235] Hench LL, Thompson ID, Cook RJ, Watson TF, Robinson
PD (2002–2011) Method and composition for whitening
teeth, WO200279108-A; EP1392611-A; WO200279108-
A1; EP1392611-A1; AU2002251214-A1; US2004137827-
A1; EP1392611-B1; DE60204225-E; ES2242852-T3;
US7040960-B2; CA2442492-C
[236] Hench LL, Polak JM, Xynos ID, Buttery LDK,
Maroothynaden J, Buttery LD (2002–2004) New compo-
sition for stimulating osteoblast production and for induc-
ing local tissue formation from a progenitor cell, comprises
an extract of bioactive glass, WO200204606-A1;
AU200180507-A; EP1311656-A1; US2004009598-A1
[237] Sepulveda P, Hench LL (2002–2012) Production of foamed
bioactive sol–gel involves hydrolyzing reaction mixture
comprising metal alkoxides with acidic catalyst, foaming
by vigorous agitation with surfactants, aging, drying and
thermally stabilizing the sol–gel, WO200296391-A1;
EP1395245-A1; AU2002310069-A1; JP2004532685-W;
US2004241238-A1; US2011163472-A1; JP4753530-B2;
EP1395245-B1
[238] Chayen N, Hench LL, Chayen NBS (2004–2009) Crystal-
lization of macromolecules, e.g. proteins, involves the
addition of mesoporous glass to crystallization sample,
WO2004041847-A1; AU2003283546-A1; EP1565484-A1;
US2006154042-A1; US7252713-B2; EP1565484-B1;
DE60319868-E; ES2305534-T3; DE60319868-T2
[239] Jones JR (2013) Review of bioactive glass: from Hench to
hybrids. Acta Biomater 9(1):4457–4486
[240] Greenspan DC (2010) NovaMin� and tooth sensitivity—an
overview. J Clin Dent 21(3):61–65
[241] Greenspan DC (2016) Glass and medicine: the Larry Hench
story. Int J Appl Glass Sci 7(2):134–138
[242] Gentleman E, Polak JM (2006) Historic and current
strategies in bone tissue engineering: do we have a hope in
Hench? J Mater Sci Mater Med 17(11):1029–1035
[243] Woodard KL (1999) Profiles in ceramics: Larry L. Hench—
Bioactive glass. Am Ceram Soc Bull 78(9):50–56
[244] Prassas M, Phalippou J, Hench LL, Zarzycki J (1982)
Preparation of xNa2O–(1 - x)SiO2 gels for the gel-glass
process. 1. Atmospheric effect on the structural evolution of
the gels. J Non Cryst Solids 48(1):79–95
[245] Hench LL, Prassas M, Phalippou J (1982) Preparation of
33 mol-percent Na2O-67 mol-percent SiO2 glass by gel-
glass transformation. J Non Cryst Solids 53(1–2):183–193
[246] Hench LL, Wong SH, Prassas M (1982) Processing and
environmental behavior of a 20 mol-percent Na2O-80 mol-
percent (20 N) SiO2 gel-glass. Am Ceram Soc Bull
61(11):1192
[247] Wang SH, Hench LL (1983) Processing variables of sol–
gel-derived (20 N) soda silicates. Am Ceram Soc Bull
62(11):1247
[248] Wallace S, Hench LL (1983) Organometallic-derived
20 mol-percent Li2O-80 mol-percent (20L) gel monoliths.
Am Ceram Soc Bull 62(11):1247
[249] Orcel G, Hench LL (1983) Effect of the use of a drying-
control chemical-agent (DCCA) on the crystallization and
thermal-behavior of soda silicate and soda borosilicate. Am
Ceram Soc Bull 62(11):1247
[250] Hench LL, Wang SH, Park SC (1984) SiO2 gel glasses. In:
Proceedings of the society of photo-optical instrumentation
engineers, vol 505, pp 90–96
[251] Prassas M, Phalippou J, Hench LL (1984) Preparation of
XNa2O–(1 - X)SiO2 gels for the gel glass process: 2: The
gel-glass conversion. J Non Cryst Solids 63(3):375–389
[252] Orcel G, Phalippou J, Hench LL (1985) Processing and
properties of XSiO2–(1 - X)Al2O3 gels. Revue Interna-
tionale des Hautes Temperatures et des Refractaires
22(3–4):185–190
[253] Orcel G, Hench L (1986) Effect of formamide additive on
the chemistry of silica sol gels. 1. NMR of silica hydrolysis.
J Non Cryst Solids 79(1–2):177–194
[254] Orcel G, Phalippou J, Hench LL (1986) Processing and
structural evolution of (XLi2O�(1 - X)Na2O)�Al2O3�2SiO2
gels. J Non Cryst Solids 82(1–3):301–306
[255] Hench LL, Orcel G (1986) Physical-chemical and bio-
chemical factors in silica sol gels. J Non Cryst Solids
82(1–3):1–10
[256] Orcel G, Phalippou J, Hench LL (1986) Structural-changes
of silica xerogels during low-temperature dehydration.
J Non Cryst Solids 88(1):114–130
[257] Orcel G, Phalippou J, Hench L (1988) Structural evolution
at low-temperature of formamide modified silica xerogels.
J Non Cryst Solids 104(2–3):170–180
[258] Sivade A, Orcel G, Hench LL, Bouaziz J, Sempere R,
Bourret D (1988) Preparation and characterization of
monolithic Si–Ce–O gels. J Non Cryst Solids
105(3):232–242
[259] Orcel G, Hench LL, Artaki I, Jonas J, Zerda TW (1988)
Effect of formamide additive on the chemistry of silica sol
gels. 2. Gel structure. J Non Cryst Solids 105(3):223–231
[260] Hench LL, West JK, Zhu BF, Ochoa R (1990) Gel-silica
hybrid optics. In: Mackenzie JD, Ulrich DR (eds) Confer-
ence on sol–gel optics, San Diego, CA, 11–13 July 1990,
J Mater Sci
Page 27
sol–gel optics. Proceedings of the society of photo-optical
instrumentation engineers (SPIE), vol 1328, pp 230–240
[261] Hench LL, Wang SH (1990) The sol–gel glass transfor-
mation of silica. Phase Transitions 24–6(2):785–834
[262] Fosmoe AG, Hench LL (1990) Transpiration cooled porous
type-VI silica rocket windows, better ceramics through
chemistry IV. In: Zelinski BJJ, Brinker CJ, Clark DE et al
(eds) Materials research society symposium proceedings,
vol 180, pp 843–848
[263] Hench LL, Vasconcelos W (1990) Gel-silica science. Annu
Rev Mater Sci 20:269–298
[264] Hench LL, Wilson MJR (1990) Processing of gel silica
monoliths for optics—drying behavior of small pore gels.
J Non Cryst Solids 121(1–3):234–243
[265] Zerda TW, Vasconcelos WL, Hench LL (1990) A positro-
nium decay analysis of the pore ultrastructure of sintered
gel silica monoliths. J Non Cryst Solids 121(1–3):143–146
[266] Vasconcelos WL, Hench LL (1990) Mechanical-properties
evolution during sintering of optical sol–gel silica. J Non
Cryst Solids 121(1–3):132–135
[267] Vasconcelos WL, Dehoff RT, Hench LL (1990) Structural
evolution during sintering of optical sol–gel silica. J Non
Cryst Solids 121(1–3):124–127
[268] West JK, Zhu BF, Cheng YC, Hench LL (1990) Quantum-
chemistry of sol–gel silica clusters. J Non Cryst Solids
121(1–3):51–55
[269] Hench LL (1991) Sol–gel silica for precision and multi-
functional optics. Ceram Int 17(4):209–216
[270] Chia T, Hench LL (1992) Microoptical arrays by laser
densification of gel-silica matrices. In: Mackenzie JD (ed)
2nd conference on sol–gel optics, San Diego, CA, 20–22
July 1992, sol–gel optics II. Proceedings of the society of
photo-optical instrumentation engineers (SPIE) 1758
(1992) 215-226
[271] Kunetz J, West JK, Hench LL (1992) GRIN optics with
transition-elements in gel-silica matrices. In: Mackenzie JD
(ed) 2nd conference on sol–gel optics, San Diego, CA,
20–22 July 1992, sol–gel optics II. Proceedings of the
society of photo-optical instrumentation engineers (SPIE),
vol 1758, pp 186–192
[272] Hench LL, Latorre GP, Donovan S, Marotta J, Valliere E
(1992) Properties of gel-silica optical matrices with 4.5 nm
and 9.0 nm pores. In: Mackenzie JD (eds) 2nd conference
on sol–gel optics, San Diego, CA, 20–22 July 1992, sol–gel
optics II. Proceedings of the society of photo-optical
instrumentation engineers (SPIE), vol 1758, pp 94–104
[273] Liu S; Hench LL (1992) Control of the texture of gel-silica
monoliths by aging treatments. In: Mackenzie JD (ed) 2nd
conference on sol–gel optics, San Diego, CA, 20–22 July,
1992, sol–gel optics II. Proceedings of the society of photo-
optical instrumentation engineers (SPIE), vol 1758,
pp 14–25
[274] Liu SY, Hench LL (1992) Lasing characteristics of a porous
gel silica matrix with 4pypo-mepts laser-dye. In: Macken-
zie JD (ed) 2nd conference on sol–gel optics, San Diego,
CA, 20–22 July 1992, sol–gel optics II. Proceedings of the
society of photo-optical instrumentation engineers (SPIE),
vol 1758, pp 953–964
[275] Chia TP, West JK, Hench LL (1992) Fabrication of
microlenses by laser densification on gel silica glass. In:
Mackenzie JD (eds) 2nd conference on sol–gel optics, San
Diego, CA, 20–22 July 1992, sol–gel optics II. Proceedings
of the society of photo-optical instrumentation engineers
(SPIE), vol 1758, pp 933–939
[276] Fosmoe A, Hench LL (1991) Gas-permeability in porous
gel silica. In: Hench LL, West JK (eds) 5TH conference on
ultrastructure processing, Orlando, FL, 17–21 Feb. Chem-
ical processing of advanced materials, pp 897–905
[277] Hench LL (1991) Sol–gel processing of net shape and
multifunctional optics. In: Hench LL, West JK (eds) 5TH
conference on ultrastructure processing, Orlando, FL,
17–21 Feb. Chemical processing of advanced materials,
pp 875–889
[278] Kunetz JM, West JK, Hench LL (1991) Restricted diffusion
of chromium ions within stabilized sol–gel silica glasses.
In: Hench LL, West JK (eds) 5th conference on ultra-
structure processing, Orlando, FL, 17–21 Feb. Chemical
processing of advanced materials, pp 115–122
[279] Wallace S, Hench LL (1991) Structural-analysis of silica-
gels during densification using raman-spectroscopy. In:
Hench LL, West JK (eds) 5th conference on ultrastructure
processing, Orlando, FL, 17–21 Feb. Chemical processing
of advanced materials, pp 69–75
[280] Hench LL (1993) Gel-silica optics—an update. In: Varsh-
neya AK, Bickford DF, Bihuniak P (eds) 3rd international
conference on advances in fusion and processing of glass/
Glassman America 92 exposition, New Orleans, LA, 09–12
June 1992. Advances in fusion and processing of glass.
Ceramic transactions, vol 29, pp 591–597
[281] Wallace S, West JK, Hench LL (1993) Interactions of water
with trisiloxane rings.1. Experimental-analysis. J Non Cryst
Solids 152(2–3):101–108
[282] West JK, Kunetz JM, Araujo FG, Hench LL (1994) Stability
of porous sol–gel silica towater diffusion—experimental and
theoretical analysis. In: Mackenzie JD (ed) Sol–gel optics III
conference, San Diego, CA, 25–27 July 1994, sol–gel optics
III. Proceedings of the society of photo-optical instrumen-
tation engineers (SPIE), vol 2288, pp 724–732
[283] Kunetz J, Bendale R, Hench LL (1994) Investigation of the
binding of Cr3? to polysiloxane structures with semi-
J Mater Sci
Page 28
empirical molecular orbital models. In: Mackenzie JD (eds)
Sol–gel optics III conference, San Diego, CA, 25–27 July
1994, sol–gel optics III. Proceedings of the society of
photo-optical instrumentation engineers (SPIE), vol 2288,
pp 700–708
[284] Wallace S, Hench LL (1994) Structural analysis of water
adsorbed in silica gel. J Sol-Gel Sci Technol 1(2):153–168
[285] Araujo FG, Chia T, Hench LL (1994) Laser densification of
channel waveguides in gel-silica substrates. J Sol-Gel Sci
Technol 2(1–3):729–735
[286] Delabrouille G, Chia T, West JK, Hench LL (1994) Laser
densification of medium pore size gel-silica glass. J Sol-Gel
Sci Technol 2(1–3):723–728
[287] Hench LL, Araujo FG, West JK, LaTorre GP (1994) Gel-
silica optics: theory and application. J Sol-Gel Sci Technol
2(1–3):647–655
[288] Hench LL (1994) Biochemical processing of materials—a
review. In: Cheetham AK, Brinker CJ, Mecartney ML et al
(eds) 6th symposium on better ceramics through chemistry,
at the 1994 MRS spring meeting, San Francisco, CA,
04–08 Apr 1994, better ceramics through chemistry VI.
Materials research society symposium proceedings, vol
346, pp 993–1004
[289] Chia TP, West JK, Hench LL (1994) A molecular-orbital
model of gel-silica IR-spectra. In: Cheetham AK, Brinker
CJ, Mecartney ML et al (eds) 6th symposium on better
ceramics through chemistry, at the 1994 MRS spring
meeting, San Francisco, CA, 04–08 Apr 1994, better
ceramics through chemistry VI. Materials research society
symposium proceedings, vol 346, pp 727–732
[290] Chia T, Hench LL, Qin C, Hsieh CK (1994) Thermal
modeling of laser-densified microlenses. Appl Opt
33(16):3486–3492
[291] West JK, Hench LL (1994) Silica fracture. 1. A ring con-
traction model. J Mater Sci 29(14):3601–3606. doi:10.
1007/BF00357324
[292] West JK, Hench LL (1994) Silica fracture. 2. A ring-
opening model via hydrolysis. J Mater Sci
29(22):5808–5816. doi:10.1007/BF00366861
[293] West JK, Hench LL (1995) Silica fracture. 3. Five- and six-
fold ring contraction models. J Mater Sci
30(24):6281–6287. doi:10.1007/BF00369678
[294] West JK, Hench LL (1994) A PM3 molecular-orbital model
of silica rings and their vibrational-spectra. J Non Cryst
Solids 180(1):11–16
[295] Hench LL, West JK (1995) Molecular-orbital models of
silica. Annu Rev Mater Sci 25:37–68
[296] West JK, Hench LL (1995) Molecular-orbital models of
silica rings and their vibrational-spectra. J Am Ceram Soc
78(4):1093–1096
[297] Araujo FG, Latorre GP, Hench LL (1995) structural evo-
lution of a porous type-vi sol–gel silica glass. J Non Cryst
Solids 185(1–2):41–48
[298] West JK, LaTorre G, Hench LL (1996) The UV–visible
spectrum in porous type VI silica: application and theory.
J Non Cryst Solids 195(1–2):45–53
[299] Powers KW, Hench LL (1998) The pentacoordinate species
in fluoride catalysis of silica gels. In: Komarneni S, Sakka
S, Phule PP et al (eds) International symposium on sol–gel
processing at the 100th annual meeting of the American-
Ceramic-Society, Cincinnati, OH, 03–06 May 1998. Sol–
gel synthesis and processing. Ceramic transactions, vol 95,
pp 197–206
[300] Powers KW, Hench LL (1998) Fabrication and characteri-
zation of sol–gel monoliths with large mesopores. In:
Komarneni S, Sakka S, Phule PP et al (eds) International
symposium on sol–gel processing at the 100th annual
meeting of the American-Ceramic-Society, Cincinnati, OH,
03–06 May 1998. Sol–gel synthesis and processing. Cera-
mic transactions, vol 95, pp 173–182
[301] Kunetz J, Hench L (1998) Restricted diffusion of chromium
nitrate salt solutions into porous sol–gel-silica monoliths.
J Am Ceram Soc 81(4):877–884
[302] West JK, West DJ, Hench LL (1998) Molecular orbital
models of AM1 and PM3 multi-ring silica clusters and their
infrared spectra. Phys Chem Glasses 39(5):301–304
[303] Hayakawa S, Hench LL (1998) Molecular orbital models of
silica clusters modified by fluorine. J Non Cryst Solids
242(2–3):131–140
[304] Nedelec JM, Hench LL (1999) Ab initio molecular orbital
calculations on silica rings. J Non Cryst Solids
255(2–3):163–170
[305] Nedelec JM, Hench LL (2000) Effect of basis set and of
electronic correlation on ab initio calculations on silica
rings. J Non Cryst Solids 277(2–3):106–113
[306] Kinowski C, Bouazaoui M, Bechara R, Hench LL, Nedelec
JM, Turrell S (2001) Kinetics of densification of porous
silica gels: a structural and textural study. J Non Cryst
Solids 291(3):143–152
[307] Kinowski C, Turrell S, Bouazaoui M, Capoen B, Nedelec
JM, Hench LL (2004) Raman spectroscopic investigations
of the effects of Ag? and Ce3? doping on the densification
of nanoporous silica xerogels. J Sol-Gel Sci Technol
32(1–3):345–348
[308] Kinowski C, Capoen B, Hench LL, Nedelec JM, Bechara
R, Turrell S, Bouazaoui M (2004) Structural and textural
study of the effects of metal ions on the densification
kinetics of nanoporous silica xerogels. J Non Cryst Solids
345:570–574
J Mater Sci
Page 29
[309] Ahmad M, Hench LL (2005) Effect of taper geometries and
launch angle on evanescent wave penetration depth in
optical fibers. Biosens Bioelectron 20(7):1312–1319
[310] Wu YQ, Du J, Choy KL, Hench LL, Guo JK (2005) For-
mation of interconnected microstructural ZnAl2O4 films
prepared by sol–gel method. Thin Solid Films
472(1–2):150–156
[311] Ahmad M, Chang KP, King TA, Hench LL (2005) A
compact fibre-based fluorescence sensor. Sens Actuators A
Phys 119(1):84–89
[312] Hench LL, Wang SH (1989) Prodution of sol–gel-derived
monoliths—by mixing water, silica precursor, salt and
metallic acid to form sol, etc., US4851373-A
[313] Hench LL, Orcel GF (1989) Mfg. large sol. gel derived
silicon, boron and sodium contg. monoliths—by cast sol
contg. silicon, boron and silicon oxide(s) and drying control
agent, gelling and drying, US4851150-A
[314] Hench LL, Orcel GF (1989) Silica-contg. ultra-porous gel
monolith—prepd. from gelled sol. contg. ammonium
hydroxide as electrolyte and formamide as drying control
additive, US4849378-A
[315] Nogues JL, Hench LL, Wang SH (1991) Doped monolith
prepd. from stabilised ultra-porous silica sol–gel—by
impregnating with soln. of organic or inorganic dopant,
drying and sealing surface or densifying, used as optical
part or glass laser, US5071674-A
[316] Hench LL (1992) Mfr. of optical waveguide in pure silica—
using controlled localised densification of sol–gel derived
silica matrices, US5080962-A
[317] Hench LL, Park SC (1992) Monolithic composite of silica
gel matrix contg. oxide powder—prepd. by gelling and
drying silica sol. contg. oxide powder in presence of drying
control additive to avoid drying cracks, US5147829-A
[318] Hench LL, Wang S (1993) Mfg. sol–gel monolith forming
blue gel used as filter—by reacting silica precursor, keto-
malonic acid and water, US5196382-A
[319] Hench LL, Simmons JH, Zhu B, Ochoa R (1993) Laser dye
impregnated silica sol–gel monoliths—provides high cas-
ing efficiency and improved photochemical stability,
US5222092-A
[320] Ochoa R, Zhu B, Hench LL, Simmons JH (1994) Photo-
chemically stable dye laser prodn.—by impregnating por-
ous silica gel–sol monolith with laser dye soln. then drying,
US5356667-A
[321] Hench LL, Araujo FG, Chia T (1997) Producing waveguide
channels in silica gel—by scanning gel silica substrate of
defined coarse porosity with laser beam to densify to
defined value, US5634955-A
[322] Hench LL (1973) Ceramics, glasses and composites in
medicine. Med Instrum 1(2):136–144
[323] Greenspan DC, Hench LL (1974) Chemical and mechani-
cal-behavior of Bioglass-AL2O3 composites. Am Ceram
Soc Bull 53(4):384
[324] Ducheyne P, Hench LL (1982) The processing and static
mechanical-properties of metal fiber reinforced Bioglass.
J Mater Sci 17(2):595–606. doi:10.1007/BF00591494
[325] Gheysen G, Ducheyne P, Hench LL, Demeester P (1983)
Bioglass composites—a potential material for dental
application. Biomaterials 4(2):81–84
[326] Zamora MP, Arnold JJ, Hench LL, Brennan AB (1995)
Bioglass� reinforced dental composites—thermomechani-
cal properties. Abstracts of Papers of The American
Chemical Society, vol 209, p 49
[327] Orefice RL, West JK, Hench LL, Brennan AB (1996)
Thermomechanical analysis of bioactive glass-polysulfone
composites. Abstracts of Papers of The American Chemical
Society, vol 212, p 361
[328] Wang M, Hench LL, Bonfield W (1998) Bioglass� high
density polyethylene composite for soft tissue applications:
preparation and evaluation. J Biomed Mater Res
42(4):577–586
[329] Orefice RL, Hench LL, Brennan AB (2000) In vitro
bioactivity of polymer matrices reinforced with a bioactive
glass phase. J Braz Chem Soc 11(1):78–85
[330] Stamboulis A, Hench LL (2000) Bioresorbable polymers:
their potential as scaffolds for Bioglass� composites. In:
Giannini S, Moroni A (eds) 13th international symposium
on ceramic in medicine/symposium on ceramic materials in
orthopaedic surgery: clinical results in the year 2000,
Bologna, Italy, 22–26 Nov 2000 bioceramics. Key engi-
neering materials, vol 192, no 1, pp 729–732
[331] Thompson I, Hench LL (2000) Reaction kinetics of
bioactive glass and a resorbable polysaccharide. In: Gian-
nini S, Moroni A (eds) 13th international symposium on
ceramic in medicine/symposium on ceramic materials in
orthopaedic surgery: clinical results in the year 2000,
Bologna, Italy, 22–26 Nov 2000 bioceramics. Key engi-
neering materials, vol 192, no 1, pp 639–642
[332] Chan C, Thompson I, Robinson P, Wilson J, Hench L
(2002) Evaluation of Bioglass/dextran composite as a bone
graft substitute. Int J Oral Maxillofac Surg 31(1):73–77
[333] Stamboulis AG, Boccaccini AR, Hench LL (2002) Novel
biodegradable polymer/bioactive glass composites for tis-
sue engineering applications. Adv Eng Mater 4(3):105–109
[334] Stamboulis A, Hench LL, Boccaccini AR (2002)
Mechanical properties of biodegradable polymer sutures
coated with bioactive glass. J Mater Sci Mater Med
13(9):843–848
[335] Roether JA, Gough JE, Boccaccini AR, Hench LL, Maquet
V, Jerome R (2002) Novel bioresorbable and bioactive
J Mater Sci
Page 30
composites based on bioactive glass and polylactide foams
for bone tissue engineering. J Mater Sci Mater Med
13(12):1207–1214
[336] Thompson I, Chan C, Robinson PD, Hench LL (2003)
Bioactive glass/dextran composite as a bone augmentation
material. J Dent Res 82:514
[337] Verrier S, Blaker JJ, Maquet V, Hench LL, Boccaccini AR
(2004) PDLLA/Bioglass� composites for soft-tissue and
hard-tissue engineering: an in vitro cell biology assessment.
Biomaterials 25(15):3013–3021
[338] Tsigkou O, Boccaccini A, Hench LL, Polak JM, Stevens
MM (2004) Effect of PDLLA/Bioglass composite films on
expression at the mRNA level of collagen type I and bone
sialoprotein in fetal osteoblasts. J Pharm Pharmacol
56:S36–S36
[339] Wu YQ, Hench LL, Du J, Choy KL, Guo JK (2004)
Preparation of hydroxyapatite fibers by electrospinning
technique. J Am Ceram Soc 87(10):1988–1991
[340] Day RM, Boccaccini AR, Shurey S, Roether JA, Forbes A,
Hench LL, Gabe SM (2004) Assessment of polyglycolic
acid mesh and bioactive glass for soft-tissue engineering
scaffolds. Biomaterials 25(27):5857–5866
[341] Pereira MM, Al-Saffar N, Selvakumaran J, Hench LL
(2005) Cytotoxicity evaluation of bioactive glass-polyvinyl
alcohol hybrid foams prepared by the sol–gel method. In:
Li P, Zhang K, Colwell CW (eds) 17th international sym-
posium on ceramics in medicine, New Orleans, LA, 08–12
Dec 2004, bioceramics, vol 17. Key engineering materials,
vol 284–286, pp 589–592
[342] Kasuga T, Maeda H, Jell G, Notingher I, Hench LL (2005)
Preparation of vaterite/poly(lactic acid) composites with
excellent apatite-forming ability. In: Li P, Zhang K, Colwell
CW (eds) 17th international symposium on ceramics in
medicine, New Orleans, LA, 08–12 Dec 2004, bioceramics,
vol 17. Key engineering materials, vol 284–286,
pp 449–452
[343] Pereira MM, Nazhat SN, Jones JR, Hench LL (2005)
Mechanical behavior of bioactive glass-polyvinyl alcohol
hybrid foams obtained by the sol–gel process. In: Li P,
Zhang K, Colwell CW (eds) 17th international symposium
on ceramics in medicine, New Orleans, LA, 08–12 Dec
2004, bioceramics, vol 17. Key engineering materials, vol
284–286, pp 757–760
[344] Pereira MM, Jones JR, Hench LL (2005) Bioactive glass
and hybrid scaffolds prepared by sol–gel method for bone
tissue engineering. Adv Appl Ceram 104(1):35–42
[345] Pereira MM, Jones JR, Orefice RL, Hench LL (2005)
Preparation of bioactive glass-polyvinyl alcohol hybrid
foams by the sol–gel method. J Mater Sci Mater Med
16(11):1045–1050
[346] Maeda H, Kasuga T, Hench LL (2006) Preparation of
poly(lactic acid) hybrid membranes containing silica. In:
Nakamura T, Yamashita K, Neo M (eds) 18th international
symposium on ceramics in medicine, Kyoto, Japan, 05–08
Dec 2005, bioceramics 18, Pts 1 and 2. Key engineering
materials vol 309–311, no 1–2, pp 775–778
[347] Maeda H, Kasuga T, Hench LL (2006) Preparation of
poly(L-lactic acid)-polysiloxane-calcium carbonate hybrid
membranes for guided bone regeneration. Biomaterials
27(8):1216–1222
[348] Kasuga T, Obata A, Maeda H, Hench LL (2007) Prepara-
tion of poly(lactic acid) composites containing vaterite for
bone repair. In: Chandra T, Tsuzaki K, Militzer M et al (eds)
5th international conference on processing and manufac-
turing of advanced materials, Vancouver, Canada, 04–08
Jul 2006, THERMEC 2006, Pts 1–5. Materials science
forum, vol 539–543, pp 617–622
[349] Orefice R, Clark A, West J, Brennan A, Hench L (2007)
Processing, properties, and in vitro bioactivity of polysul-
fone-bioactive glass composites. J Biomed Mater Res Part
A 80A(3):565–580
[350] Tsigkou O, Hench LL, Boccaccini AR, Polak JM, Stevens
MM (2007) Enhanced differentiation and mineralization of
human fetal osteoblasts on PDLLA containing Bioglass�
composite films in the absence of osteogenic supplements.
J Biomed Mater Res Part A 80A(4):837–851
[351] Orefice R, West J, LaTorre G, Hench L, Brennan A (2010)
Effect of long-term in vitro testing on the properties of
bioactive glass-polysulfone composites. Biomacro-
molecules 11(3):657–665
[352] Ducheyne PLR, Hench LL (1984) Bioglass reinforced with
metal fibres—for use in medical or dental implants,
US4478904-A
[353] Bonfield W; Wang M; Hench LL (1997–2003) Bioactive
composite for repair of hard and soft tissues—from dis-
persion of particulate bioactive glass in polyolefin binder,
used for prostheses, particularly those in contact with soft
tissue, WO9717401-A1; AU9677246-A; US5728753-A;
EP859813-A1; CN1207753-A; US5962549-A;
JP2000500174-W; EP859813-B1; DE69630389-E
[354] Hench LL, West JK, Latorre G, Wilson J, Toreki W, Batich
C, LaTorre G (1997–2000) Fluid composition adapted for
e.g. repair and replacement of hard or soft tissue—com-
prises homogeneous suspension of bio-active and bio-
compatible glass particulate in aqueous solution of dextran
or dextran derivative, WO9745070-A1; AU9730755-A;
US5840290-A; CN1226149-A; EP961594-A1;
JP2000511084-W
[355] Hench LL, Latorre G, West JK, Wilson J, Toreki W, Batich
C (1999–2001) Mouldable bioactive composition for repair,
J Mater Sci
Page 31
augmentation and regeneration of bone—comprises bioac-
tive particles of glass, glass-ceramics, calcium phosphate
and/or calcium apatite and polysaccharide carrier,
WO9902107-A1; AU9883874-A; US6051247-A; EP10093
33-A1; BR9810693-A; JP2001509419-W; AU736846-B
[356] Hench LL, West JK, Latorre G, Wilson J, Toreki W, Batich
C (2000–2001) An injectable composition comprising a
bio-active glass in a dextran suspension, used to repair,
replace, reconstruct or reconstruct soft and/or hard tissue in
animals, WO200030561-A1; AU200016318-A; US61906
84-B1
[357] Buscemi P, Chhatre R, Clark DE, Onoda GY, Hench LL
(1974) Bioglass coated stainless-steel prostheses. Am
Ceram Soc Bull 53(8):611
[358] Griss P, Greenspan DC, Heimke G, Krempien B, Buchinger
R, Hench LL, Jentschura G (1976) Evaluation of a Bio-
glass-coated Al2O3 total hip prosthesis in sheep. J Biomed
Mater Res 10(4):511–518
[359] Greenspan DC, Hench LL (1976) Chemical and mechani-
cal-behavior of Bioglass-coated alumina. J Biomed Mater
Res 10(4):503–509
[360] Greenspan DC, Hench LL (1976) Mechanical-behavior of
Bioglass coated alumina. Am Ceram Soc Bull 55(4):409
[361] Ritter JE, Greenspan DC, Palmer RA, Hench LL (1979)
Use of fracture-mechanics theory in lifetime predictions for
alumina and Bioglass-coated alumina. J Biomed Mater Res
13(2):251–263
[362] Ducheyne P, Hench LL, Kagan A, Martens M, Mulier JC
(1979) Short-term bonding behavior of Bioglass coatings on
metal-substrate. Arch Orthop Trauma Surg 94(3):155–160
[363] Ducheyne P, Hench LL, Kagan A, Martens M, Bursens A,
Mulier JC (1980) Effect of hydroxyapatite impregnation on
skeletal bonding of porous coated implants. J Biomed
Mater Res 14(3):225–237
[364] Ducheyne P, Hench LL, Demeester P (1980) Short-term
bonding behavior of Bioglass coatings on metal-substrate.
J Biomech 13(9):807–808
[365] Lacefield WR, Hench LL (1986) The bonding of Bioglass to a
cobalt-chromium surgical implant alloy. Biomaterials
7(2):104–108
[366] West JK, Gonzales G, Boschi A, Latorre G, Hench LL
(1993) Optimization of rapid immersion coating of bioac-
tive glass on 316L stainless-steel. In: Ducheyne P, Chris-
tiansen D (eds) 6th international symposium on ceramics in
medicine, Philadelphia, PA, Nov 1993 bioceramics, vol 6,
pp 405–410
[367] Kasuga T, Nogami M, Niinomi M, Hattori T, Hench LL
(2005) Enhancing effect of autoclaving on bioactivity of
beta-titanium alloy coated with calcium phosphate glass-
ceramic. In: Li P, Zhang K, Colwell CW (eds) 17th
international symposium on ceramics in medicine, New
Orleans, LA, 08–12 Dec 2004 bioceramics, vol 17. Key
engineering materials, vol 284–286, pp 243–246
[368] Hench LL, Greenspan DC (1978) Coating alumina-based
ceramic with biologically active glass—by dipping into glass
powder, fusing the glass, fissuring and recoating, FR2378733-
A1; GB1581063-A; CH627723-A; AT7800566-A
[369] Greenspan DC, Hench LL (1978) Dense alumina prosthetic
bone implants—coated with biologically active glass,
DE2703814
[370] Hench LL, Greenspan DC (1978) Coating alumina with bio-
logically active glass—to form cement free artificial prosthesis
bone implants and orthopaedic devices, US4103002-A
[371] Hench LL, Buscemi PJ (1978–1985) Metal-coated biolog-
ically active glass—used to make artificial implant useful in
orthopaedics and dentistry, BE866323-A; DE2818630-A;
NL7804395-A; SE7804881-A; BR7802572-A; DK7801
811-A; JP53145394-A; FR2391175-A; ZA7802401-A;
US4159358-A; GB1552570-A; US4234972-A; CA1102
953-A; DE2818630-C; CH631143-A; JP82041941-B;
AT7802968-A; IT1104191-B
[372] Cook RJ, Hench LL, Watson TF, Thompson ID, Robinson
PD (2003) Treatment of metal surface comprises contacting
metal surface with bioactive glass using air abrasion sys-
tem, WO2003080140-A1; AU2003214436-A1
[373] Freiman SW, Hench LL (1967) Kinetics of crystallization
on Li2O–SiO2 glasses. Am Ceram Soc Bull 46(4):397
[374] Kinser DL, Hench LL (1967) Effect of thermal treatment
upon dielectric properties and structure of a lithia-silica
glass. Am Ceram Soc Bull 46(4):389
[375] Kinser DL, Hench LL (1968) Effect of a metastable pre-
cipitate on electrical properties of an Li2O–SiO2 glass.
J Am Ceram Soc 51(8):445–449
[376] Freiman SW, Hench LL (1968) Kinetics of crystallization
in Li2O–SiO2 glasses. J Am Ceram Soc 51(7):382–387
[377] Tuohig WD, Hench LL (1968) Neutron irradiation effects
in thermally treated glasses. Am Ceram Soc Bull 47(4):398
[378] Gokurath CV, Freiman SW, Hench LL (1968) Analysis of
thickness error in transmission microscopy of ceramics. Am
Ceram Soc Bull 47(4):398
[379] Kinser DL, Hench LL (1969) Electrode polarization in
alkali silicate glasses. J Am Ceram Soc 52(12):638–641
[380] Kinser DL, Hench LL (1969) Polarization behavior in binary
alkali-silicate glasses. Am Ceram Soc Bull 48(4):444
[381] Hench LL, Kinser DL (1969) Dielectric behavior of binary
Li2O and Na2O-silicate glasses during initial stages of
crystallization. Am Ceram Soc Bull 48(4):444
[382] Gokularathnam CV, Freiman SW, Dehoff RT, Hench LL
(1969) Thickness error in quantitative transmission micro-
scopy of ceramics. J Am Ceram Soc 52(6):327–331
J Mater Sci
Page 32
[383] Tuohig WD, Hench LL (1969) Neutron effects in thermally
treated glasses. J Nucl Mater 31(1):86–92
[384] Hench LL, Kinser DL, Freiman SW (1968) Structure and
properties of thermally treated binary silicate glasses. Am
Ceram Soc Bull 47(4):398
[385] Freiman SW, Gould RW, Hench LL (1968) A small angle
x-ray scattering study of crystallization in glass. Am Ceram
Soc Bull 47(4):398
[386] Freiman SW, Hench LL (1969) Further analysis of glass
crystallization kinetics. J Am Ceram Soc 52(2):111–112
[387] Freiman SW, Hench LL (1969) Mechanical behavior of
partially crystallized Li2O–SiO2 glass-ceramics. Am Ceram
Soc Bull 48(4):448
[388] Kinser DL, Hench LL (1970) Hot stage transmission
electron microscopy of crystallisation in a lithia-silica glass.
J Mater Sci 5(5):369–373. doi:10.1007/BF00549996
[389] Hench LL, Frieman SW, Kinser DL (1971) Early stages of
crystallisation in a Li2O–2SiO2 glass. Phys Chem Glasses
12(2):58–63
[390] Freiman SW, Hench LL (1972) Effect of crystallization on
mechanical properties of Li2O–SiO2 glass-ceramics. J Am
Ceram Soc 55(2):86–90
[391] Hartwig BA, Hench LL (1972) Epitaxy of Poly-L-alanine
on L-quartz and a glass-ceramic. J Biomed Mater Res
6(5):413–423
[392] Ohuchi F, Clark DE, Hench LL (1979) Effect of crystal-
lization on the auger-electron signal decay in an Li2-O�2SiO2 glass and glass-ceramic. J Am Ceram Soc
62(9–10):500–503
[393] Palmer RA, Lindberg WR, Hench LL (1979) Fatigue
properties of Li2O�2SiO2 glass and glass-ceramic. J Am
Ceram Soc 62(5–6):319–320
[394] Barrett JM, Clark DE, Hench LL (1979) Durability and
strength of Li2O–Al2O3–CaO–SiO2 glass-ceramics. Am
Ceram Soc Bull 58(3):378
[395] Mccracken WJ, Clark DE, Hench LL (1982) Aqueous
durability of lithium disilicate glass-ceramics. Am Ceram
Soc Bull 61(11):1218–1223
[396] Chen XF, Hench LL, Greenspan D, Zhong J, Zhang X
(1998) Investigation on phase separation, nucleation and
crystallization in bioactive glass-ceramics containing fluo-
rophlogopite and fluorapatite. Ceram Int 24(5):401–410
[397] Rehman I, Karsh M, Hench LL, Bonfield W (2000) Anal-
ysis of apatite layers on glass-ceramic particulate using
FTIR and FT-Raman spectroscopy. J Biomed Mater Res
50(2):97–100
[398] Montazerian M, Zanotto ED (2016) History and trends of
bioactive glass-ceramics. J Biomed Mater Res Part A
104A(5):1231–1249
[399] Montazerian M, Zanotto ED (2016) Bioactive glass-ce-
ramics: processing, properties and applications. In: Boc-
caccini AR, Brauer DS, Hupa L (eds) Bioactive glasses:
fundamentals, technology and applications. Royal Society
of Chemistry, London, pp 27–60
[400] Peitl O, Orefice RL, Hench LL, Brennan AB (2004) Effect of
the crystallization of bioactive glass reinforcing agents on the
mechanical properties of polymer composites.Mater Sci Eng
A Struct Mater Prop Microstruct Process 372(1–2):245–251
[401] Peitl O, Zanotto ED, Serbena FC (2012) Hench, LL;
Compositional and microstructural design of highly
bioactive P2O5–Na2O–CaO–SiO2 glass-ceramics. Acta
Biomater 8(1):321–332
[402] Barrett JM; Clark DE; Hench LL (1980–1989) Glass
compsn. for forming glass-ceramic—casting and heat
treating glass-ceramic for dental restorations, US4189325-
A; GB2041349-A; FR2446262-A; JP55126546-A;
DE2949619-A; FR2454298-A; CA1120960-A;
GB2041349-B; JP88020779-B; IT1212375-B
[403] Crovace MC, Souza MT, Chinaglia CR, Peitl O, Zanotto
ED (2016) Biosilicate�—a multipurpose, highly bioactive
glass-ceramic. In vitro, in vivo and clinical trials. J Non
Cryst Solids 432A(15):90–110
[404] Chen QZ, Thompson ID, Boccaccini AR (2006) 45S5
Bioglass�-derived glass–ceramic scaffolds for bone tissue
engineering. Biomaterials 27(11):2414–2425
[405] Notingher I, Verrier S, Romanska H, Bishop AE, Polak JM,
Hench LL (2002) In situ characterisation of living cells by
Raman spectroscopy. Spectrosc Int J 16(2):43–51
[406] Notingher I, Boccaccini AR, Jones J, Maquet V, Hench LL
(2002) Application of Raman microspectroscopy to the
characterisation of bioactive materials. Mater Charact
49(3):255–260
[407] Notingher I, Jones JR, Verrier S, Bisson I, Embanga P,
Edwards P, Polak JM, Hench LL (2003) Application of
FTIR and Raman spectroscopy to characterisation of
bioactive materials and living cells. Spectrosc Int J
17(2–3):275–288
[408] Notingher I, Verrier S, Haque S, Polak JM, Hench LL
(2003) Spectroscopic study of human lung epithelial cells
(A549) in culture: living cells versus dead cells. Biopoly-
mers 72(4):230–240
[409] Notingher I, Gough JE, Hench LL (2004) Study of osteo-
blasts mineralisation in vitro by Raman micro-spec-
troscopy. In: Barbosa MA, Monteiro FJ, Correia R et al
(eds) 16th international symposium on ceramics in medi-
cine, Porto, Portugal, 06–09 Nov 2003 bioceramics, vol 16.
Key engineering materials, vol 254, no 2, pp 769–772
J Mater Sci
Page 33
[410] Hench LL, Notingher I (2004) Nova Test: a biophotonics
system for rapid in vitro toxicity testing. Am Ceram Soc
Bull 83(2):9601–9603
[411] Hench LL, Notingher I (2004) A biophotonics system for
rapid in vitro toxicity testing. Am Ceram Soc Bull
83(2):14–15
[412] Verrier S, Notingher I, Polak JM, Hench LL (2004) In situ
monitoring of cell death using Raman microspectroscopy.
Biopolymers 74(1–2):157–162
[413] Notingher I, Bisson I, Bishop AE, Randle WL, Polak JMP,
Hench LL (2004) In situ spectral monitoring of mRNA
translation in embryonic stem cells during differentiation
in vitro. Anal Chem 76(11):3185–3193
[414] Notingher L, Bisson I, Polak JM, Hench LL (2004) In situ
spectroscopic study of nucleic acids in differentiating
embryonic stem cells. Vib Spectrosc 35(1–2):199–203
[415] Notingher I, Jell G, Lohbauer U, Salih V, Hench LL (2004)
In situ non-invasive spectral discrimination between bone
cell phenotypes used in tissue engineering. J Cell Biochem
92(6):1180–1192
[416] Owen CA, Notingher I, Jell G, Selvakumaran J, Stevens
MM, Hench LL (2004) Raman spectroscopy as a tool for
preliminary drug testing on human cells. J Pharm Phar-
macol 56:S51–S52
[417] Notingher I, Selvakumaran J, Hench LL (2004) New
detection system for toxic agents based on continuous
spectroscopic monitoring of living cells. Biosens Bioelec-
tron 20(4):780–789
[418] Notingher I, Green C, Dyer C, Perkins E, Hopkins N,
Lindsay C, Hench LL (2004) Discrimination between ricin
and sulphur mustard toxicity in vitro using Raman spec-
troscopy. J R Soc Interface 1(1):79–90
[419] Jones JR, Vats A, Notingher L, Gough JE, Tolley NS, Polak
JM, Hench LL (2005) In situ monitoring of chondrocyte
response to bioactive scaffolds using Raman spectroscopy.
In: Li P, Zhang K, Colwell CW (eds) 17th international
symposium on ceramics in medicine, New Orleans, LA,
08–12 Dec 2004, bioceramics, vol 17. Key engineering
materials, vol 284–286, pp 623–626
[420] Notingher I, Jell G, Notingher PL, Bisson I, Polak JMP,
Hench LL (2005) Raman spectroscopy: potential tool for
in situ characterization of bone cell differentiation. In: Li P,
Zhang K, Colwell CW (eds) 17th international symposium
on ceramics in medicine, New Orleans, LA, 08–12 Dec
2004, bioceramics, vol 17. Key engineering materials, vol
284–286, pp 545–548
[421] Hench LL, Notingher I (2005) A bio-photonics system for
rapid in vitro testing of cells and ceramics. In: Li P, Zhang
K, Colwell CW (eds) 17th international symposium on
ceramics in medicine, New Orleans, LA, 08–12 Dec 2004,
bioceramics, vol 17. Key engineering materials, vol
284–286, pp 531–536
[422] Notingher L, Jell G, Notingher PL, Bisson I, Tsigkou O,
Polak JM, Stevens MM, Hench LL (2005) Multivariate
analysis of Raman spectra for in vitro non-invasive studies
of living cells. J Mol Struct 744:179–185
[423] Notingher I, Hench LL (2006) Raman microspectroscopy: a
noninvasive tool for studies of individual living cells
in vitro. Expert Rev Med Devices 3(2):215–234
[424] Owen CA, Selvakumaran J, Notingher I, Jell G, Hench LL,
Stevens MM (2006) In vitro toxicology evaluation of
pharmaceuticals using Raman micro-spectroscopy. J Cell
Biochem 99(1):178–186
[425] Owen CA, Notingher I, Hill R, Stevens M, Hench LL
(2006) Progress in Raman spectroscopy in the fields of
tissue engineering, diagnostics and toxicological testing.
J Mater Sci Mater Med 17(11):1019–1023
[426] Jell G, Notingher I, Tsigkou O, Notingher P, Polak JM,
Hench LL, Stevens MM (2008) Bioactive glass-induced
osteoblast differentiation: a noninvasive spectroscopic
study. J Biomed Mater Res Part A 86A(1):31–40
[427] HenchLL,Notingher I (2004–2006) Eliciting ofRaman signal
from living cell or living cells, e.g. for detecting changes in cell
phenotype, involves irradiating the cell with laser having
specified wavelength, WO2004005871-A1; AU2003281292-
A1; EP1520157-A1; JP2005532547-W; US2006115804-A1
[428] Fenn MB, Xanthopoulos P, Pyrgiotakis G, Grobmyer SR,
Pardalos PM, Hench LL (2011) Raman spectroscopy for
clinical oncology. Adv Opt Technol. Article ID 213783.
doi:10.1155/2011/213783
[429] Hench LL, Russell R (1968) Effect of Cr2O3 vaporization
on sintering of MgO. Trans Br Ceram Soc 67(9):377–380
[430] Hench LL, Clark DE (1968) A theory of error minimization in
X-ray spectrochemical sample preparation. Am Ceram Soc
Bull 47(4):411
[431] Hench LL (1969) Characterization of ceramics—instru-
mental techniques. Am Ceram Soc Bull 48(8):824
[432] Johnson PF, Gehl SM, Hench LL (1974) Quantitative
relations between microstructure and electrical properties of
TiO2, UO2 AND Ta2O5. Am Ceram Soc Bull 53(4):347
[433] Clark DE, Hench LL, Bates SR (1974) Molybdenum
metalizing on beryllia. Am Ceram Soc Bull 53(6):473–477
[434] Clark DE, Hench LL, Bates SR (1974) Molybdenum met-
alizing of BeO substrates. Am Ceram Soc Bull 53(4):337
[435] Hench LL, Cason BPJ, Housefie LG, Smith DG (1974)
Controlled flocculation of wall tile glaze effluent. Am
Ceram Soc Bull 53(12):860–864
[436] Scott GJ, Hench LL (1974) Effect of powder compact
microstructure on reaction-kinetics. Am Ceram Soc Bull
53(4):315
J Mater Sci
Page 34
[437] Bottcher JH, Hench LL (1974) Quantitative-analysis of
glass phase effects on dielectric properties of dense alu-
mina. Am Ceram Soc Bull 53(4):347
[438] Hench LL (1988) Ceramics and the challenge of change.
Adv Ceram Mater 3(3):203–206
[439] Ohuchi F, Vaidyanathan PN, Hench LL, Dutta S (1980)
Auger-electron spectroscopy analysis of Y2O3-doped Si3N4
grain-boundary. Am Ceram Soc Bull 59(11):1162
[440] Vaidyanathan PN, Hench LL, Dutta S (1980) Grain-boundary
phase in Y2O3-doped Si3N4. AmCeram Soc Bull 59(11):1161
[441] Bernstein SA, Hench LL, Dutta S (1980) Use of x-ray-
emission spectra in analysis of Si3N4 grain-boundaries. Am
Ceram Soc Bull 59(11):1161–1162
[442] Hench LL, Freiman SW (1981) Investigation of the oxi-
dation of hot-pressed Si3N4 with infrared reflection spec-
troscopy (IRRS). J Mater Sci 16(10):2767–2773. doi:10.
1007/BF02402840
[443] Hench LL, Vaidyanathan PN, Dutta S (1982) Analysis of
Si3N4 grain-boundary devitrification. Am Ceram Soc Bull
61(11):1195
[444] Guha JP, Hench LL (1982) Grain-boundary phases in hot-
pressed silicon-nitride containing Y2O3 and CeO2 addi-
tives. Am Ceram Soc Bull 61(11):1195
[445] Mccracken WJ, Person WB, Hench LL (1985) Polarized
infrared reflection spectroscopy of single-crystal lithia-sili-
cates and quartz. J Mater Sci 20(11):3853–3864. doi:10.
1007/BF00552373
[446] Lee BI, Hench LL (1986) Properties of partially densified
SiC/SiO2 gel-matrix composites. Am Ceram Soc Bull
65(11):1477
[447] Lee BI, Hench LL (1987) Molecular composites of SiC/
SiO2, SiC/Al2O3, and SiC/TiC. Am Ceram Soc Bull
66(10):1482–1485
[448] Lee BI, Hench LL (1987) Electrophoretic behavior and
surface-reactions of sol–gel derived alumina. Colloids Surf
23(3):211–229
[449] Chia T, Hench LL, Qin C, Hsieh CK (1990) Laser densi-
fication modelling, better ceramics through chemistry IV.
In: Zelinski BJJ, Brinker CJ, Clark DE et al (eds) Materials
research society symposium proceedings, vol 180,
pp 819–824
[450] West JK, Mecholsky JJ, Hench LL (1999) The application
of fractal and quantum geometry to brittle fracture. J Non
Cryst Solids 260(1–2):99–108
[451] Wu YQ, Choy KL, Hench LL (2004) Preparation of alpha-
alumina platelets by laser scanning. J Am Ceram Soc
87(8):1606–1608
[452] Wu YQ, Choy KL, Hench LL (2005) Laser densification of
TiO2 films prepared by aerosol assisted vapour deposition.
Appl Surf Sci 247(1–4):378–383
[453] Wu YQ, Du J, Choy KL, Hench LL (2007) Laser densifi-
cation of alumina powder beds generated using aerosol
assisted spray deposition. J Eur Ceram Soc 27(16):
4727–4735
[454] Wu YQ, Du J, Choy KL, Hench LL (2007) Fabrication of
titanium dioxide ceramics by laser sintering green layers
prepared via aerosol assisted spray deposition. Mater Sci
Eng A Struct Mater Prop Microstruct Process 454:148–155
[455] Hench LL, Lee BL (1989) Crosslinking of polysilastyrene—
by heating with dicumyl peroxide, US4804731-A
[456] Hench LL, Lee BI (1989) Lightweight composite of silicon
carbide in silica—is formed by slurrying silicon carbide
particulate in silica sol. casting into e.g. mat and gelling,
ageing and drying, US4859525-A
[457] Hench LL, Karakoti A, Krishna MSB, Reid D, Seal S,
Krishna MSB, Hench L, Krishna MS, Read D, Sil S, Reyd
D, Moorthy SBH (2009–2015) Manufacture of function-
alized aluminosilicate powder for producing structural
material, involves functionalizing aluminosilicate powder
with liquid reagent and drying powder, WO2009082442-
A1; AU2008341102-A1; EP2222611-A1; CA2712575-A1;
CN101977868-A; US2011112272-A1; MX2010006298-
A1; KR2011069743-A; JP2011523392-W; IN201002042-
P2; RU2010130262-A; HK1153998-A0; RU2485065-C2;
SG162859-A1; SG162859-B; AU2008341102-B2;
IL205996-A; JP5749931-B2; BR200822065-A2;
JP2015143191-A
[458] Seal S, Reid DL, Hench LL (2012) Composition used for
scavenging oil from oil–water mixture, comprises func-
tionalized fly ash particles that include bulk portion having
functionalized surfaces with reactive groups/materials
having hydrophobic groups covalently bound to it,
US2012006753-A1; US8318625-B2
[459] Seal S, Reid DL, Hench LL (2013) Forming functionalized
fly ash particles useful e.g. for scavenging oil from oil–
water mixture, comprises contacting fly ash particles with
hydroxide compound, and reacting the obtained fly ash
particles with organic alcohol or organic acid,
US2013040803-A1; US8404609-B2
[460] Johnson PF, Nastasi RJ, Hench LL (1973) Ceramic elec-
trodes for use in cortical environment. Am Ceram Soc Bull
52(4):432
[461] Johnson PF, Hench LL (1976) An in vitro model for
evaluating neural stimulating electrodes. J Biomed Mater
Res 10(6):907–928
[462] Johnson PF, Bernstein JJ, Hunter G, Dawson WW, Hench
LL (1977) An in vitro and in vivo analysis of anodized
tantalum capacitive electrodes—corrosion response, phys-
iology, and histology. J Biomed Mater Res 11(5):637–656
J Mater Sci
Page 35
[463] Bernstein JJ, Johnson PF, Hench LL, Hunter G, Dawson
WW (1977) Cortical histopathology following stimulation
with metallic and carbon electrodes. Brain Behav Evol
14(1–2):126–157
[464] Johnson PF, Hench LL (1977) An in vitro analysis of metal-
electrodes for use in neural environment. Brain Behav Evol
14(1–2):23–45
[465] Hench LL, Jenkins DA (1967) AC conductivity of a glass
semiconductor. Phys Status Solidi 20(1):327–330
[466] Hench LL (1967) Compositional effects on AC conduc-
tivity of a semiconducting glass. Am Ceram Soc Bull
46(4):462
[467] Hench LL, Daughenbaugh GA (1968) Radiation effects in
semiconducting glasses. J Nucl Mater 25(1):58–63
[468] Kinser DL, Clark AE, Hench LL (1968) Effects of thermal
treatment on electrical properties of a K2PO3–V2O5 semi-
conducting glass. Am Ceram Soc Bull 47(4):398
[469] Schaake HF, Marietta M, Hench LL (1969) Electron
transport phenomena in transition metal oxide glasses. Am
Ceram Soc Bull 48(4):442
[470] Murthy MK, Topping JA, Hench LL (1973) Structure of
germanate glasses. Abstracts of Papers of the American
Chemical Society AUG26, pp 24–24
[471] Gehl SM, Johnson PF, Hench LL (1974) Quantitative
microscopy characterization of electronic ceramics. Am
Ceram Soc Bull 53(4):347
[472] Abe Y, Shimakawa H, Hench LL (1982) Protonic con-
duction in alkaline-earth meta-phosphate glasses containing
water. J Non Cryst Solids 51(3):357–365
[473] Tehrani S, Hench LL, Vanvliet CM, Bosman G (1985)
Observation of single-carrier space-charge-limited flow in
nitrogen-doped alpha-silicon carbide. 2. Electrical noise.
J Appl Phys 58(4):1571–1577
[474] Tehrani S, Kim JS, Hench LL, Vanvliet CM, Bosman G
(1985) Observation of single-carrier space-charge-limited
flow in nitrogen-doped alpha-silicon carbide. 1. IV char-
acteristics and impedance. J Appl Phys 58(4):1562–1570
[475] Tehrani S, Bosman G, Hench LL, Vanvliet CM (1986)
Observation of single carrier space-charge-limited flow in
nitrogen-doped alpha-silicon carbide. 3. Computer calcu-
lations. J Appl Phys 60(7):2386–2395
[476] Vanvliet CM, Bosman G, Hench LL (1988) New perspec-
tives of silicon-carbide—an overview, with special
emphasis on noise and space-charge-limited flow. Annu
Rev Mater Sci 18:381–421
[477] Luo MY, Bosman G, Vanderziel A, Hench LL (1988)
Theory and experiments of 1/f noise in schottky-barrier
diodes operating in the thermionic-emission mode. IEEE
Trans Electron Devices 35(8):1351–1356
[478] Abe Y, Hosono H, Ohta Y, Hench LL (1988) Protonic
conduction in oxide glasses—simple relations between
electrical-conductivity, activation-energy, and the O–H
bonding state. Phys Rev B 38(14):10166–10169
[479] Abe Y, Hosono H, Hikichi Y, Hench LL (1990) Protonic
conduction in PbO–SiO2 glasses—A quantitative estima-
tion. J Mater Sci Lett 9(12):1443–1444
[480] Kotama M, Nakanishi K, Hosono H, Abe Y, Hench LL
(1991) Evidence for protonic conduction in alkali-free
phosphate-glasses. J Electrochem Soc 138(10):2928–2930
[481] Abe Y, Hosono H, Akita O, Hench LL (1994) Protonic
conduction in phosphate-glasses. J Electrochem Soc
141(6):L64–L65
[482] Abe Y, Li GM, Nogami M, Kasuga T, Hench LL (1996)
Superprotonic conductors of glassy zirconium phosphates.
J Electrochem Soc 143(1):144–147
[483] Abe Y, Hayashi M, Iwamoto T, Sumi H, Hench LL (2005)
Superprotonic conducting phosphate glasses containing
water. J Non Cryst Solids 351(24–26):2138–2141
[484] Abe Y, Nishizaki S, Muroi T, Kato Y, Hench LL (2006)
Conversion of gypsum into a superprotonic conductor.
Mater Res Innovations 10(1):17–20
[485] Hench LL (1969) Humidity effects in electronic substrates.
Am Ceram Soc Bull 48(8):803
[486] Gokularathnam CV, Gould RW, Hench LL (1971) X-ray
diffraction analysis of structural changes in glass. Am
Ceram Soc Bull 50(4):414
[487] Clark DE, Hench LL (1972) Sample preparation variables
in x-ray spectrochemical analysis. Am Ceram Soc Bull
51(4):370
[488] Sanders DM, Person WB, Hench LL (1972) New methods
for studying glass corrosion kinetics. Appl Spectrosc
26(5):530–536
[489] Sanders DM, Hench LL, Person WB (1972) structure of
corroded binary silicate glass surfaces. Am Ceram Soc Bull
51(4):374
[490] Sanders DM, Hench LL (1972) Automated techniques for
analysis of glass corrosion. Am Ceram Soc Bull 51(4):372
[491] Onoda GY, Dove DB, Hench LL (1973) Analysis of glass
container coatings by auger-electron spectroscopy. Am
Ceram Soc Bull 52(4):379
[492] Sanders DM, Hench LL (1973) Structural-analysis of silica-
rich film formation on alkali-silicate glasses. Am Ceram
Soc Bull 52(4):379
[493] Sanders DM, Hench LL (1973) Mechanisms of glass cor-
rosion. J Am Ceram Soc 56(7):373–377
[494] Hench LL, Clark AE, Dilmore MF, Ethridge EC (1973)
Corrosion of multicomponent glasses. Am Ceram Soc Bull
52(9):704
J Mater Sci
Page 36
[495] Sanders DM, Hench LL (1973) Surface-roughness and
glass corrosion. Am Ceram Soc Bull 52(9):666–669
[496] Sanders DM, Hench LL (1973) Environmental effects on
glass corrosion kinetics. Am Ceram Soc Bull 52(9):662
[497] Hench LL, Sanders DM, Dilmore MF, Ethridge EC (1973)
Structural-analysis of corrosion processes of commercial
glasses. Am Ceram Soc Bull 52(4):380
[498] Clark AE, Hench LL (1973) Effect of P5?, B3? and F-
additions on corrosion of Na2O–CaO–SiO2 glasses. Am
Ceram Soc Bull 52(4):379
[499] Sanders DM, Person WB, Hench LL (1974) Quantitative-
analysis of glass structure with use of infrared reflection
spectra. Appl Spectrosc 28(3):247–255
[500] Ethridge EC, Hench LL (1974) Effects of compositional
range on alkali-silicate glass corrosion kinetics. Am Ceram
Soc Bull 53(4):349
[501] Dilmore MF, Hench LL (1974) Corrosion behavior of
Li2O–Al2O3–SiO2 glasses. Am Ceram Soc Bull 53(4):349
[502] Clark DE, Hench LL, Acree WA (1975) Electron-micro-
probe analysis of Na2O–CaO–SiO2 glass. J Am Ceram Soc
58(11–1):531–532
[503] Gokularathnam CV, Gould RW, Hench LL (1975) Effect of
water on structure of vitreous silica. Phys Chem Glasses
16(1):13–16
[504] Hench LL (1975) Characterization of glass corrosion and
durability. J Non Cryst Solids 19:27–39
[505] Clark DE, Acree WA, Hench LL (1976) Electron-micro-
probe analysis of corroded soda-lime-silica glasses. J Am
Ceram Soc 59(9–10):463–464
[506] Clark DE, Dilmore MF, Ethridge EC, Hench LL (1976)
Aqueous corrosion of soda-silica and soda-lime-silica glass.
J Am Ceram Soc 59(1–2):62–65
[507] Clark AE, Pantano CG, Hench LL (1976) Auger spectro-
scopic analysis of Bioglass corrosion films. J Am Ceram
Soc 59(1–2):37–39
[508] Pantano CG, Hench LL (1977) Cleaning borosilicate glass
for biological application. J Test Eval 5(1):66–69
[509] Hench LL (1977) Physical-chemistry of glass surfaces.
J Non Cryst Solids 25(1–3):343–369
[510] Clark DE, Ethridge EC, Dilmore MF, Hench LL (1977)
Quantitative-analysis of corroded glass using infrared fre-
quency-shifts. Glass Technol 18(4):121–124
[511] Ethridge EC, Hench LL (1977) Static corrosion of glass.
Am Ceram Soc Bull 56(3):330
[512] Ethridge EC, Hench LL (1977) Mechanisms of glass cor-
rosion. Am Ceram Soc Bull 56(3):330
[513] Dilmore MF, Hench LL (1977) Role of aluminum ions in
glass durability. Am Ceram Soc Bull 56(3):330
[514] Dilmore MF, Hench LL (1977) Role of mixed-alkali effect
on glass durability. Am Ceram Soc Bull 56(3):330
[515] Dilmore MF, Clark DE, Hench LL (1978) Chemical dura-
bility of Na2O–K2O–CaO–SiO2 glasses. J Am Ceram Soc
61(9–10):439–443
[516] Hench LL, Clark DE (1978) Physical-chemistry of glass
surfaces. J Non Cryst Solids 28(1):83–105
[517] Dilmore MF, Clark DE, Hench LL (1978) Aqueous cor-
rosion of lithia-alumina-silicate glasses. Am Ceram Soc
Bull 57(11):1040–1044
[518] Palmer RA, Hench LL (1979) Nondestructive evaluation of
surface flaws using infrared reflection spectroscopy. Am
Ceram Soc Bull 58(3):384
[519] Ethridge EC, Clark DE, Hench LL (1979) Effects of glass-
surface area to solution volume ratio on glass corrosion.
Phys Chem Glasses 20(2):35–40
[520] Hench LL, Newton RG, Bernstein S (1979) Use of infrared
reflection spectroscopy in analysis of durability of medieval
glasses, with some comments on conservation procedures.
Glass Technol 20(4):144–148
[521] Dilmore MF, Clark DE, Hench LL (1979) Corrosion
behavior of lithia disilicate glass in aqueous-solutions of
aluminum compounds. Am Ceram Soc Bull 58(11):1111
[522] Mccracken WJ, Clark DE, Hench LL (1979) Effects of
solution pH on corrosion behavior of Li2O�2SiO2 glass-
ceramics. Am Ceram Soc Bull 58(3):382
[523] Clark DE, Yenbower EL, Hench LL (1979) Corrosion
behavior of a zinc-borosilicate simulated nuclear waste
glass. Am Ceram Soc Bull 58(3):324
[524] Hench LL (1980) Control of glass surfaces. Am Ceram Soc
Bull 59(8):864
[525] Chao Y, Clark D, Hench LL (1980) Weathering of Na2-O�2SiO2 glass. Am Ceram Soc Bull 59(8):864
[526] Hench LL (1982) Glass surfaces—1982. J Phys 43(NC-
9):625–636
[527] Hench LL, Clark DE (1982) Surface-analysis of glasses. CS
symposium series, vol 199, pp 203–229
[528] Bendale RD, Hench LL (1995) Molecular-orbital models of
strained tetrahedral edge shared active-sites on dehydrox-
ylated silica—an AM1 and PM3 study. Surf Sci
338(1–3):322–328
[529] West JK, Hench LL (1998) The effect of environment on
silica fracture: vacuum, carbon monoxide, water and
nitrogen. Philos Mag A Phys Condens Matter Struct
Defects Mech Prop 77(1):85–113
[530] Hench LL, Smith D, Cason B, Housefie LG (1973) Con-
trolled flocculation of tile glaze wastes. Am Ceram Soc Bull
52(4):418
[531] Hench LL, Clark DE, Yenbower EL (1979) Approach to
long-term prediction of stability of nuclear waste forms.
Am Ceram Soc Bull 58(3):319
J Mater Sci
Page 37
[532] Hench LL (1980) Waste forms—methods of predicting
long-term performance of glasses and other alternatives.
Bull Am Phys Soc 25(4):499
[533] Hench AA, Hench LL (1983) Computer-analysis of nuclear
waste glass composition effects on leaching. Nucl Chem
Waste Manag 4(3):231–238
[534] Werme LO, Hench LL, Nogues JL, Odelius H, Lodding A
(1983) On the pH-dependence of leaching of nuclear waste
glasses. J Nucl Mater 116(1):69–77
[535] Hench LL, Clark DE, Campbell J (1984) High-level waste
immobilization forms. Nucl Chem Waste Manag
5(2):149–173
[536] Hench LL, Spilman DB, Buonaquisti AD (1984) Ruther-
ford back scattering surface-analysis of nuclear waste
glasses after one year burial in Stripa. Nucl Chem Waste
Manag 5(1):75–85
[537] Lodding A, Hench LL, Werme L (1984) Nuclear waste
glass interfaces after one year burial in Stripa. 2. Glass
bentonite. J Nucl Mater 125(3):280–286
[538] Hench LL, Lodding A, Werme L (1984) Nuclear waste
glass interfaces after one year burial in Stripa. 1. Glass
glass. J Nucl Mater 125(3):273–279
[539] Hench LL, Werme L, Lodding A (1984) Nuclear waste
glass interfaces after one year burial in Stripa. 3. Glass
granite. J Nucl Mater 126(3):226–233
[540] Hench LL, Wilson MJR (1985) Nuclear waste glass inter-
faces after one year burial in Stripa. 4. Comparative surface
profiles. J Nucl Mater 136(2–3):218–228
[541] Maurer C, Clark DE, Hench LL, Grambow B (1985) Sol-
ubility effects on the corrosion of nuclear defense waste
glasses. Nucl Chem Waste Manag 5(3):193–201
[542] Zhu BF, Clark DE, Hench LL, Wicks GG (1986) Leaching
behavior of nuclear waste glass heterogeneities. J Non
Cryst Solids 80(1–3):324–334
[543] Hench LL (1986) International collaboration in nuclear
waste solidification. Nucl Technol 73(2):188–198
[544] Hench LL, Clark DE, Harker AB (1986) Nuclear waste
solids. J Mater Sci 21(5):1457–1478. doi:10.1007/
BF01114698
[545] Namboodri CG; Namboodri SL; Wicks GG; Lodding AR;
Hench LL; Clark DE; Newton RG; Surface-analyses of
SRS waste glass buried for up to 2 years in limestone in the
united-kingdom. In: Wicks GG; Bickford DF; Bunnell LR
(eds) 5th international symposium at the 93rd annual
meeting of the American Ceramic Society: ceramics in
nuclear and hazardous waste management, Cincinnati, OH,
28 Apr–02 May 1991, nuclear waste management IV.
Ceramic transactions, vol 23, pp 653–662
[546] Hench LL (1975) Prosthetic implant materials. Annu Rev
Mater Sci 5:279–300
[547] Hench LL (1979) Future-developments and applications of
biomaterials—overview. Biomater Med Devices Artif
Organs 7(2):339–350
[548] Hench LL (1980) Biomaterials. Science
208(4446):826–831
[549] Hench LL (1989) Bioceramics and the origin of life.
J Biomed Mater Res 23(7):685–703
[550] Hench LL, Wilson J (1991) Bioceramics. MRS Bull
16(9):62–74
[551] Hench LL (1993) Bioceramics—from concept to clinic.
Am Ceram Soc Bull 72(4):93–98
[552] Hench LL (1994) Bioactive ceramics: theory and clinical
applications. In: Andersson OH, Happonen RP, YliUrpo A
(eds) 7th international symposium on ceramics in medicine,
Turku, Finland, 28–30 July 1994, bioceramics, vol 7,
pp 3–14
[553] Hench LL (1995) Inorganic biomaterials. In: Interrante LV,
Caspar LA, Ellis AB (eds) Symposium on materials
chemistry—an emerging discipline, at the 204th National
Meeting of the American-Chemical-Society, Washington,
DC, 23–28 Aug 1992, materials chemistry: an emerging
discipline. Advances in chemistry series, vol 245,
pp 523–547
[554] Hench LL (1995) Bioactive implants. Chem Ind
14:547–550
[555] Hench LL (1996) Life and death: the ultimate phase
transformation. Thermochim Acta 280:1–13
[556] Hench LL (1997) Introduction to biomaterials. Anales
Quim 93(1):S3–S5
[557] Hench LL (1998) Bioceramics, a clinical success. Am
Ceram Soc Bull 77(7):67–74
[558] Hench LL (1999) Role of inorganic and theoretical chem-
istry in ceramics: past, present, and future. Br Ceram Trans
98(5):246–250
[559] Hench LL (1999) Medical materials for the next millen-
nium. MRS Bull 24(5):13–19
[560] Ratner BD, Hench LL (1999) Perspectives on biomaterials.
Curr Opin Solid State Mater Sci 4(4):379–380
[561] Hench LL (2000) The challenge of orthopaedic materials.
Curr Orthop 14(1):7–15
[562] Hench LL (2000) A genetic theory of bioactive materials.
In: Giannini S, Moroni A (eds) 13th international sympo-
sium on ceramic in medicine/symposium on ceramic
materials in orthopaedic surgery: clinical results in the year
2000, Bologna, Italy, 22–26 Nov 2000, bioceramics. Key
engineering materials, vol 192, no 1, pp 575–580
[563] Hench LL, Polak JM, Xynos ID, Buttery LDK (2000)
Bioactive materials to control cell cycle. Mater Res Inno-
vations 3(6):313–323
J Mater Sci
Page 38
[564] Jones JR, Hench LL (2001) Materials perspective—
Biomedical materials for new millennium: perspective on
the future. Mater Sci Technol 17(8):891–900
[565] Hench LL, Xynos ID, Edgar AJ, Buttery LDK, Polak JM
(2002) A genetic basis for biomedical materials. In:
McLean M (eds) Conference on materials science and
engineering, Imperial College Science, Technology and
Medicine, London, England, 14–15 May 2001, materials
science and engineering: its nucleation and growth,
pp 283–296
[566] Hench LL (2002) Ceramic engineering design: designing a
bionic cat. In: Clark DE, Folz DC, McGee TD (eds)
Workshop on designing with engineering ceramics, Cocoa
Beach, FL, Jan 2001. Introduction to ceramic engineering
design, pp 374–391
[567] Cleevely ST, Hench L (2002) Professor Larry Hench—
making discoveries in the biomaterials field. Mater World
10(11):12
[568] Hench LL, Boccaccini AR, Day RM et al (2003) Third-
generation gene-activating biomaterials. In: Chandra T,
Torralba JM, Sakai T (eds) 4th international conference on
processing and manufacturing of advanced materials, Univ.
Carlos III Madrid, Madrid, Spain, 07–11 Jul 2003, Ther-
mec’2003, PTS 1–5. Materials science forum, vol 426, no
4, pp 179–184
[569] Hench LL (2003) The role of ceramics in an age of biology.
In: Sundar V, Rusin RP, Rutiser CA (eds) Symposium on
bioceramics held at the 105th annual meeting of the
American-Ceramic-Society, Nashville, TN, 27–30 Apr
2003 bioceramics: materials and applications IV. Ceramic
transactions, vol 147, pp 3–12
[570] Hench LL (2003) Glass and genes: the 2001 W. E. S. turner
memorial lecture. Glass Technol 44(1):1–10
[571] Shirtliff VJ, Hench LL (2003) Bioactive materials for tissue
engineering, regeneration and repair. J Mater Sci
38(23):4697–4707. doi:10.1023/A:1027414700111
[572] Hench LL (2005) Challenges for bioceramics in the 21st
century. Am Ceram Soc Bull 84(9):18–21
[573] Polak J, Hench L (2005) Gene therapy progress and pro-
spects: in tissue engineering. Gene Ther 12(24):1725–1733
[574] Karakoti AS, Hench LL, Seal S (2006) The potential toxicity
of nanomaterials—the role of surfaces. JOM 58(7):77–82
[575] Maroothynaden J, Hench LL (2006) The effect of micro-
gravity and bioactive surfaces on the mineralization of
bone. JOM 58(7):57–63
[576] Hench LL, Thompson I (2010) Twenty-first century chal-
lenges for biomaterials. J R Soc Interface 7(4):S379–S391
[577] Hench LL (2011) Glass and glass-ceramic technologies to
transform the world. Int J Appl Glass Sci 2(3):162–176
[578] Hench LL (2014) Bio-ceramics for the next 25 years:
challenges and opportunities. In: Antoniac I, Cavalu S,
Traistaru T (eds) 25th symposium and annual meeting of
the international-society-for-ceramics-in-medicine (ISCM),
Bucharest, Romania, 07–10 Nov 2013 bioceramics, vol 25.
Key engineering materials, vol 587, pp 3–14
[579] Hench LL (2015) The future of bioactive ceramics. J Mater
Sci Mater Med 26(2):86
[580] Hench L, Mote D, Sorenson S, Martin R (1973)
Researchers on research. Eng Educ 63(4):268–272
[581] Pennypacker HS, Hench LL (1997) Making behavioural
technology transferable. Behav Anal 20(2):97–108
[582] Hench L, Wilson J (1985) The bionic kreidl. J Non Cryst
Solids 73(1–3):R13–R16
[583] Simmons JH (2016) The professional life of Larry L.
Hench—a true renaissance scientist/engineer. J Non Cryst
Solids: JNCS 436:58–61
[584] Bonfield W (2006) A tribute to Professor Larry Hench.
J Mater Sci Mater Med 17(11):965–966
[585] Schoen HJ, Greenspan DC (2016) In memoriam Larry L.
Hench, Ph.D. 1938–2015. J Biomed Mater Res Part A
104(4):819–820
[586] Hench LL (1967) His heart in ceramics. Am Ceram Soc
Bull 46(5):A10
[587] Hench LL, Uhlmann DR (2000) Obituary—Professor W.D.
Kingery. Ceram Int 26(8):797–799
[588] Hench LL, Uhlmann DR (2000) W. David Kingery—
obituary. Ind Ceram 20(2):131
J Mater Sci