10 LIFTING SYSTEMS A-Anchor Lifting System CONCRETE ACCESSORIES The CONAC A-Anchor Lifting System is versatile and economical, easy to work with in precast concrete plants as well as in the field. The system allows the use of a standard hook or clevis, eliminating the need for specialized lifting hardware. TM
4
Embed
A-Anchor ITIN SSTES CONCRETE ACCESSORIES · PDF file10 A-Anchor ITIN SSTES CONCRETE ACCESSORIES Lifting System The CONAC A-Anchor Lifting System is versatile and economical, easy to
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
10
LIFTIN
G S
YS
TE
MS
A-Anchor Lifting System
CONC
RETE
ACC
ESSO
RIES
The CONAC A-Anchor Lifting System is versatile and economical, easy to work with in precast concrete plants as well as in the field. The system allows the use of a standard hook or clevis, eliminating the need for specialized lifting hardware.
TM
LIFT
ING
SY
ST
EM
S
11
A
Note: Safe working Load provides a factor of safety of approximately 4:1 based on a minimum concrete strength of 4,000 psi. For use as pulling iron load maybe increased by 33% with 3 to 1 Safety Factor.
A-ANCHOR RUBBER RECESS FORMERSThe A Anchor Rubber Recess Formers are manufactured in 90° angles. The recess former properly sets the top of the anchor 3/4" below the surface of the concrete.
A-ANCHOR MAGNETIC RECESS PLATEThe A Anchor Magnetic Recess Plate allows attachment of the Rubber Recess Former to any steel form, eliminating bolting or welding. Threaded holes in magnet (3/8"-16 NC) allow easy release of magnet from form.
PART NO.
A-Magnetic Plate
PART NO.
A-Setting Plate
PART NO.
A-Setting Rod
A-ANCHOR SETTING PLATEThe A-Anchor Setting Plate is used in various applications to install A-Anchors in a form.
A- ANCHOR SETTING RODThe Setting Rod is used to set the recess former in place by way of a predilled hole in the form. 3/8”-16 NC thread,For use with