CHAIN TRAY KIT FOR A SLIDE GATE 2601-279-D-10-15 DoorKing Part Number 2601-270 Copyright 2015 DoorKing, Inc. All rights reserved. Works with all Doorking slide gate operators (Typically for operators that are post or pedestal mounted) and by connecting multiple 10 ft sections together (Sold separately), will fit any length gate. The chain tray is typically used for gates longer than 20 feet in length. The chain tray helps support the weight of the chain (up to #100 chain link size) and reduce the chain stretching that occurs over time. Installation Kit Includes: 1 - 10 ft chain tray section 6 - carriage bolts and nuts 3 - support brackets Support Bracket Facing Up (Lower chain position) Support Bracket Facing Down (Higher chain position) Support Bracket Extended Typical Post Mount Pedestal Mount Extended Mount 2” 1.8” 2” Gate Frame Gate Frame 1.8” 4” 1.8” 4” 7” 3” 5” 4” 8.5” 6.75” 5.25” Support Bracket (Facing down) Support Bracket (Extended) Support Bracket (Facing up) Weep Hole (Drainage) Carriage Bolts A chain’s normal sagging distance should be at least one (1) inch per 10 feet of gate. Mount the chain tray higher than the chain’s normal sagging distance. The support brackets should be welded to the gate. 10 ft. Segment Chain Tray Segments Connection 10 ft. Segment 1” 4” 4” 9500 9200 9000 1” 9050 9100 9150 Gate Frame Gate Frame Gate Frame Gate Frame 120 S. Glasgow Avenue Inglewood, California 90301 U.S.A.